| /* |
| * MediaTek xHCI Host Controller Driver |
| * |
| * Copyright (c) 2015 MediaTek Inc. |
| * Author: |
| * Chunfeng Yun <chunfeng.yun@mediatek.com> |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/iopoll.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "xhci.h" |
| #include "xhci-mtk.h" |
| |
| /* ip_pw_ctrl0 register */ |
| #define CTRL0_IP_SW_RST BIT(0) |
| |
| /* ip_pw_ctrl1 register */ |
| #define CTRL1_IP_HOST_PDN BIT(0) |
| |
| /* ip_pw_ctrl2 register */ |
| #define CTRL2_IP_DEV_PDN BIT(0) |
| |
| /* ip_pw_sts1 register */ |
| #define STS1_IP_SLEEP_STS BIT(30) |
| #define STS1_XHCI_RST BIT(11) |
| #define STS1_SYS125_RST BIT(10) |
| #define STS1_REF_RST BIT(8) |
| #define STS1_SYSPLL_STABLE BIT(0) |
| |
| /* ip_xhci_cap register */ |
| #define CAP_U3_PORT_NUM(p) ((p) & 0xff) |
| #define CAP_U2_PORT_NUM(p) (((p) >> 8) & 0xff) |
| |
| /* u3_ctrl_p register */ |
| #define CTRL_U3_PORT_HOST_SEL BIT(2) |
| #define CTRL_U3_PORT_PDN BIT(1) |
| #define CTRL_U3_PORT_DIS BIT(0) |
| |
| /* u2_ctrl_p register */ |
| #define CTRL_U2_PORT_HOST_SEL BIT(2) |
| #define CTRL_U2_PORT_PDN BIT(1) |
| #define CTRL_U2_PORT_DIS BIT(0) |
| |
| /* u2_phy_pll register */ |
| #define CTRL_U2_FORCE_PLL_STB BIT(28) |
| |
| #define PERI_WK_CTRL0 0x400 |
| #define UWK_CTR0_0P_LS_PE BIT(8) /* posedge */ |
| #define UWK_CTR0_0P_LS_NE BIT(7) /* negedge for 0p linestate*/ |
| #define UWK_CTL1_1P_LS_C(x) (((x) & 0xf) << 1) |
| #define UWK_CTL1_1P_LS_E BIT(0) |
| |
| #define PERI_WK_CTRL1 0x404 |
| #define UWK_CTL1_IS_C(x) (((x) & 0xf) << 26) |
| #define UWK_CTL1_IS_E BIT(25) |
| #define UWK_CTL1_0P_LS_C(x) (((x) & 0xf) << 21) |
| #define UWK_CTL1_0P_LS_E BIT(20) |
| #define UWK_CTL1_IDDIG_C(x) (((x) & 0xf) << 11) /* cycle debounce */ |
| #define UWK_CTL1_IDDIG_E BIT(10) /* enable debounce */ |
| #define UWK_CTL1_IDDIG_P BIT(9) /* polarity */ |
| #define UWK_CTL1_0P_LS_P BIT(7) |
| #define UWK_CTL1_IS_P BIT(6) /* polarity for ip sleep */ |
| |
| enum ssusb_wakeup_src { |
| SSUSB_WK_IP_SLEEP = 1, |
| SSUSB_WK_LINE_STATE = 2, |
| }; |
| |
| static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk) |
| { |
| struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; |
| u32 value, check_val; |
| int ret; |
| int i; |
| |
| /* power on host ip */ |
| value = readl(&ippc->ip_pw_ctr1); |
| value &= ~CTRL1_IP_HOST_PDN; |
| writel(value, &ippc->ip_pw_ctr1); |
| |
| /* power on and enable all u3 ports */ |
| for (i = 0; i < mtk->num_u3_ports; i++) { |
| value = readl(&ippc->u3_ctrl_p[i]); |
| value &= ~(CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS); |
| value |= CTRL_U3_PORT_HOST_SEL; |
| writel(value, &ippc->u3_ctrl_p[i]); |
| } |
| |
| /* power on and enable all u2 ports */ |
| for (i = 0; i < mtk->num_u2_ports; i++) { |
| value = readl(&ippc->u2_ctrl_p[i]); |
| value &= ~(CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS); |
| value |= CTRL_U2_PORT_HOST_SEL; |
| writel(value, &ippc->u2_ctrl_p[i]); |
| } |
| |
| /* |
| * wait for clocks to be stable, and clock domains reset to |
| * be inactive after power on and enable ports |
| */ |
| check_val = STS1_SYSPLL_STABLE | STS1_REF_RST | |
| STS1_SYS125_RST | STS1_XHCI_RST; |
| |
| ret = readl_poll_timeout(&ippc->ip_pw_sts1, value, |
| (check_val == (value & check_val)), 100, 20000); |
| if (ret) { |
| dev_err(mtk->dev, "clocks are not stable (0x%x)\n", value); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk) |
| { |
| struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; |
| u32 value; |
| int ret; |
| int i; |
| |
| /* power down all u3 ports */ |
| for (i = 0; i < mtk->num_u3_ports; i++) { |
| value = readl(&ippc->u3_ctrl_p[i]); |
| value |= CTRL_U3_PORT_PDN; |
| writel(value, &ippc->u3_ctrl_p[i]); |
| } |
| |
| /* power down all u2 ports */ |
| for (i = 0; i < mtk->num_u2_ports; i++) { |
| value = readl(&ippc->u2_ctrl_p[i]); |
| value |= CTRL_U2_PORT_PDN; |
| writel(value, &ippc->u2_ctrl_p[i]); |
| } |
| |
| /* power down host ip */ |
| value = readl(&ippc->ip_pw_ctr1); |
| value |= CTRL1_IP_HOST_PDN; |
| writel(value, &ippc->ip_pw_ctr1); |
| |
| /* wait for host ip to sleep */ |
| ret = readl_poll_timeout(&ippc->ip_pw_sts1, value, |
| (value & STS1_IP_SLEEP_STS), 100, 100000); |
| if (ret) { |
| dev_err(mtk->dev, "ip sleep failed!!!\n"); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int xhci_mtk_ssusb_config(struct xhci_hcd_mtk *mtk) |
| { |
| struct mu3c_ippc_regs __iomem *ippc = mtk->ippc_regs; |
| u32 value; |
| |
| /* reset whole ip */ |
| value = readl(&ippc->ip_pw_ctr0); |
| value |= CTRL0_IP_SW_RST; |
| writel(value, &ippc->ip_pw_ctr0); |
| udelay(1); |
| value = readl(&ippc->ip_pw_ctr0); |
| value &= ~CTRL0_IP_SW_RST; |
| writel(value, &ippc->ip_pw_ctr0); |
| |
| /* |
| * device ip is default power-on in fact |
| * power down device ip, otherwise ip-sleep will fail |
| */ |
| value = readl(&ippc->ip_pw_ctr2); |
| value |= CTRL2_IP_DEV_PDN; |
| writel(value, &ippc->ip_pw_ctr2); |
| |
| value = readl(&ippc->ip_xhci_cap); |
| mtk->num_u3_ports = CAP_U3_PORT_NUM(value); |
| mtk->num_u2_ports = CAP_U2_PORT_NUM(value); |
| dev_dbg(mtk->dev, "%s u2p:%d, u3p:%d\n", __func__, |
| mtk->num_u2_ports, mtk->num_u3_ports); |
| |
| return xhci_mtk_host_enable(mtk); |
| } |
| |
| static int xhci_mtk_clks_enable(struct xhci_hcd_mtk *mtk) |
| { |
| int ret; |
| |
| ret = clk_prepare_enable(mtk->sys_clk); |
| if (ret) { |
| dev_err(mtk->dev, "failed to enable sys_clk\n"); |
| goto sys_clk_err; |
| } |
| |
| if (mtk->wakeup_src) { |
| ret = clk_prepare_enable(mtk->wk_deb_p0); |
| if (ret) { |
| dev_err(mtk->dev, "failed to enable wk_deb_p0\n"); |
| goto usb_p0_err; |
| } |
| |
| ret = clk_prepare_enable(mtk->wk_deb_p1); |
| if (ret) { |
| dev_err(mtk->dev, "failed to enable wk_deb_p1\n"); |
| goto usb_p1_err; |
| } |
| } |
| return 0; |
| |
| usb_p1_err: |
| clk_disable_unprepare(mtk->wk_deb_p0); |
| usb_p0_err: |
| clk_disable_unprepare(mtk->sys_clk); |
| sys_clk_err: |
| return -EINVAL; |
| } |
| |
| static void xhci_mtk_clks_disable(struct xhci_hcd_mtk *mtk) |
| { |
| if (mtk->wakeup_src) { |
| clk_disable_unprepare(mtk->wk_deb_p1); |
| clk_disable_unprepare(mtk->wk_deb_p0); |
| } |
| clk_disable_unprepare(mtk->sys_clk); |
| } |
| |
| /* only clocks can be turn off for ip-sleep wakeup mode */ |
| static void usb_wakeup_ip_sleep_en(struct xhci_hcd_mtk *mtk) |
| { |
| u32 tmp; |
| struct regmap *pericfg = mtk->pericfg; |
| |
| regmap_read(pericfg, PERI_WK_CTRL1, &tmp); |
| tmp &= ~UWK_CTL1_IS_P; |
| tmp &= ~(UWK_CTL1_IS_C(0xf)); |
| tmp |= UWK_CTL1_IS_C(0x8); |
| regmap_write(pericfg, PERI_WK_CTRL1, tmp); |
| regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_IS_E); |
| |
| regmap_read(pericfg, PERI_WK_CTRL1, &tmp); |
| dev_dbg(mtk->dev, "%s(): WK_CTRL1[P6,E25,C26:29]=%#x\n", |
| __func__, tmp); |
| } |
| |
| static void usb_wakeup_ip_sleep_dis(struct xhci_hcd_mtk *mtk) |
| { |
| u32 tmp; |
| |
| regmap_read(mtk->pericfg, PERI_WK_CTRL1, &tmp); |
| tmp &= ~UWK_CTL1_IS_E; |
| regmap_write(mtk->pericfg, PERI_WK_CTRL1, tmp); |
| } |
| |
| /* |
| * for line-state wakeup mode, phy's power should not power-down |
| * and only support cable plug in/out |
| */ |
| static void usb_wakeup_line_state_en(struct xhci_hcd_mtk *mtk) |
| { |
| u32 tmp; |
| struct regmap *pericfg = mtk->pericfg; |
| |
| /* line-state of u2-port0 */ |
| regmap_read(pericfg, PERI_WK_CTRL1, &tmp); |
| tmp &= ~UWK_CTL1_0P_LS_P; |
| tmp &= ~(UWK_CTL1_0P_LS_C(0xf)); |
| tmp |= UWK_CTL1_0P_LS_C(0x8); |
| regmap_write(pericfg, PERI_WK_CTRL1, tmp); |
| regmap_read(pericfg, PERI_WK_CTRL1, &tmp); |
| regmap_write(pericfg, PERI_WK_CTRL1, tmp | UWK_CTL1_0P_LS_E); |
| |
| /* line-state of u2-port1 */ |
| regmap_read(pericfg, PERI_WK_CTRL0, &tmp); |
| tmp &= ~(UWK_CTL1_1P_LS_C(0xf)); |
| tmp |= UWK_CTL1_1P_LS_C(0x8); |
| regmap_write(pericfg, PERI_WK_CTRL0, tmp); |
| regmap_write(pericfg, PERI_WK_CTRL0, tmp | UWK_CTL1_1P_LS_E); |
| } |
| |
| static void usb_wakeup_line_state_dis(struct xhci_hcd_mtk *mtk) |
| { |
| u32 tmp; |
| struct regmap *pericfg = mtk->pericfg; |
| |
| /* line-state of u2-port0 */ |
| regmap_read(pericfg, PERI_WK_CTRL1, &tmp); |
| tmp &= ~UWK_CTL1_0P_LS_E; |
| regmap_write(pericfg, PERI_WK_CTRL1, tmp); |
| |
| /* line-state of u2-port1 */ |
| regmap_read(pericfg, PERI_WK_CTRL0, &tmp); |
| tmp &= ~UWK_CTL1_1P_LS_E; |
| regmap_write(pericfg, PERI_WK_CTRL0, tmp); |
| } |
| |
| static void usb_wakeup_enable(struct xhci_hcd_mtk *mtk) |
| { |
| if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP) |
| usb_wakeup_ip_sleep_en(mtk); |
| else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE) |
| usb_wakeup_line_state_en(mtk); |
| } |
| |
| static void usb_wakeup_disable(struct xhci_hcd_mtk *mtk) |
| { |
| if (mtk->wakeup_src == SSUSB_WK_IP_SLEEP) |
| usb_wakeup_ip_sleep_dis(mtk); |
| else if (mtk->wakeup_src == SSUSB_WK_LINE_STATE) |
| usb_wakeup_line_state_dis(mtk); |
| } |
| |
| static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk, |
| struct device_node *dn) |
| { |
| struct device *dev = mtk->dev; |
| |
| /* |
| * wakeup function is optional, so it is not an error if this property |
| * does not exist, and in such case, no need to get relative |
| * properties anymore. |
| */ |
| of_property_read_u32(dn, "mediatek,wakeup-src", &mtk->wakeup_src); |
| if (!mtk->wakeup_src) |
| return 0; |
| |
| mtk->wk_deb_p0 = devm_clk_get(dev, "wakeup_deb_p0"); |
| if (IS_ERR(mtk->wk_deb_p0)) { |
| dev_err(dev, "fail to get wakeup_deb_p0\n"); |
| return PTR_ERR(mtk->wk_deb_p0); |
| } |
| |
| mtk->wk_deb_p1 = devm_clk_get(dev, "wakeup_deb_p1"); |
| if (IS_ERR(mtk->wk_deb_p1)) { |
| dev_err(dev, "fail to get wakeup_deb_p1\n"); |
| return PTR_ERR(mtk->wk_deb_p1); |
| } |
| |
| mtk->pericfg = syscon_regmap_lookup_by_phandle(dn, |
| "mediatek,syscon-wakeup"); |
| if (IS_ERR(mtk->pericfg)) { |
| dev_err(dev, "fail to get pericfg regs\n"); |
| return PTR_ERR(mtk->pericfg); |
| } |
| |
| return 0; |
| } |
| |
| static int xhci_mtk_setup(struct usb_hcd *hcd); |
| static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = { |
| .extra_priv_size = sizeof(struct xhci_hcd), |
| .reset = xhci_mtk_setup, |
| }; |
| |
| static struct hc_driver __read_mostly xhci_mtk_hc_driver; |
| |
| static int xhci_mtk_phy_init(struct xhci_hcd_mtk *mtk) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; i < mtk->num_phys; i++) { |
| ret = phy_init(mtk->phys[i]); |
| if (ret) |
| goto exit_phy; |
| } |
| return 0; |
| |
| exit_phy: |
| for (; i > 0; i--) |
| phy_exit(mtk->phys[i - 1]); |
| |
| return ret; |
| } |
| |
| static int xhci_mtk_phy_exit(struct xhci_hcd_mtk *mtk) |
| { |
| int i; |
| |
| for (i = 0; i < mtk->num_phys; i++) |
| phy_exit(mtk->phys[i]); |
| |
| return 0; |
| } |
| |
| static int xhci_mtk_phy_power_on(struct xhci_hcd_mtk *mtk) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; i < mtk->num_phys; i++) { |
| ret = phy_power_on(mtk->phys[i]); |
| if (ret) |
| goto power_off_phy; |
| } |
| return 0; |
| |
| power_off_phy: |
| for (; i > 0; i--) |
| phy_power_off(mtk->phys[i - 1]); |
| |
| return ret; |
| } |
| |
| static void xhci_mtk_phy_power_off(struct xhci_hcd_mtk *mtk) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < mtk->num_phys; i++) |
| phy_power_off(mtk->phys[i]); |
| } |
| |
| static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk) |
| { |
| int ret; |
| |
| ret = regulator_enable(mtk->vbus); |
| if (ret) { |
| dev_err(mtk->dev, "failed to enable vbus\n"); |
| return ret; |
| } |
| |
| ret = regulator_enable(mtk->vusb33); |
| if (ret) { |
| dev_err(mtk->dev, "failed to enable vusb33\n"); |
| regulator_disable(mtk->vbus); |
| return ret; |
| } |
| return 0; |
| } |
| |
| static void xhci_mtk_ldos_disable(struct xhci_hcd_mtk *mtk) |
| { |
| regulator_disable(mtk->vbus); |
| regulator_disable(mtk->vusb33); |
| } |
| |
| static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) |
| { |
| struct usb_hcd *hcd = xhci_to_hcd(xhci); |
| struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); |
| |
| /* |
| * As of now platform drivers don't provide MSI support so we ensure |
| * here that the generic code does not try to make a pci_dev from our |
| * dev struct in order to setup MSI |
| */ |
| xhci->quirks |= XHCI_PLAT; |
| xhci->quirks |= XHCI_MTK_HOST; |
| /* |
| * MTK host controller gives a spurious successful event after a |
| * short transfer. Ignore it. |
| */ |
| xhci->quirks |= XHCI_SPURIOUS_SUCCESS; |
| if (mtk->lpm_support) |
| xhci->quirks |= XHCI_LPM_SUPPORT; |
| } |
| |
| /* called during probe() after chip reset completes */ |
| static int xhci_mtk_setup(struct usb_hcd *hcd) |
| { |
| struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd); |
| int ret; |
| |
| if (usb_hcd_is_primary_hcd(hcd)) { |
| ret = xhci_mtk_ssusb_config(mtk); |
| if (ret) |
| return ret; |
| ret = xhci_mtk_sch_init(mtk); |
| if (ret) |
| return ret; |
| } |
| |
| return xhci_gen_setup(hcd, xhci_mtk_quirks); |
| } |
| |
| static int xhci_mtk_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *node = dev->of_node; |
| struct xhci_hcd_mtk *mtk; |
| const struct hc_driver *driver; |
| struct xhci_hcd *xhci; |
| struct resource *res; |
| struct usb_hcd *hcd; |
| struct phy *phy; |
| int phy_num; |
| int ret = -ENODEV; |
| int irq; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| driver = &xhci_mtk_hc_driver; |
| mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL); |
| if (!mtk) |
| return -ENOMEM; |
| |
| mtk->dev = dev; |
| mtk->vbus = devm_regulator_get(dev, "vbus"); |
| if (IS_ERR(mtk->vbus)) { |
| dev_err(dev, "fail to get vbus\n"); |
| return PTR_ERR(mtk->vbus); |
| } |
| |
| mtk->vusb33 = devm_regulator_get(dev, "vusb33"); |
| if (IS_ERR(mtk->vusb33)) { |
| dev_err(dev, "fail to get vusb33\n"); |
| return PTR_ERR(mtk->vusb33); |
| } |
| |
| mtk->sys_clk = devm_clk_get(dev, "sys_ck"); |
| if (IS_ERR(mtk->sys_clk)) { |
| dev_err(dev, "fail to get sys_ck\n"); |
| return PTR_ERR(mtk->sys_clk); |
| } |
| |
| mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable"); |
| |
| ret = usb_wakeup_of_property_parse(mtk, node); |
| if (ret) |
| return ret; |
| |
| mtk->num_phys = of_count_phandle_with_args(node, |
| "phys", "#phy-cells"); |
| if (mtk->num_phys > 0) { |
| mtk->phys = devm_kcalloc(dev, mtk->num_phys, |
| sizeof(*mtk->phys), GFP_KERNEL); |
| if (!mtk->phys) |
| return -ENOMEM; |
| } else { |
| mtk->num_phys = 0; |
| } |
| pm_runtime_enable(dev); |
| pm_runtime_get_sync(dev); |
| device_enable_async_suspend(dev); |
| |
| ret = xhci_mtk_ldos_enable(mtk); |
| if (ret) |
| goto disable_pm; |
| |
| ret = xhci_mtk_clks_enable(mtk); |
| if (ret) |
| goto disable_ldos; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| goto disable_clk; |
| |
| /* Initialize dma_mask and coherent_dma_mask to 32-bits */ |
| ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32)); |
| if (ret) |
| goto disable_clk; |
| |
| if (!dev->dma_mask) |
| dev->dma_mask = &dev->coherent_dma_mask; |
| else |
| dma_set_mask(dev, DMA_BIT_MASK(32)); |
| |
| hcd = usb_create_hcd(driver, dev, dev_name(dev)); |
| if (!hcd) { |
| ret = -ENOMEM; |
| goto disable_clk; |
| } |
| |
| /* |
| * USB 2.0 roothub is stored in the platform_device. |
| * Swap it with mtk HCD. |
| */ |
| mtk->hcd = platform_get_drvdata(pdev); |
| platform_set_drvdata(pdev, mtk); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| hcd->regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(hcd->regs)) { |
| ret = PTR_ERR(hcd->regs); |
| goto put_usb2_hcd; |
| } |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| mtk->ippc_regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(mtk->ippc_regs)) { |
| ret = PTR_ERR(mtk->ippc_regs); |
| goto put_usb2_hcd; |
| } |
| |
| for (phy_num = 0; phy_num < mtk->num_phys; phy_num++) { |
| phy = devm_of_phy_get_by_index(dev, node, phy_num); |
| if (IS_ERR(phy)) { |
| ret = PTR_ERR(phy); |
| goto put_usb2_hcd; |
| } |
| mtk->phys[phy_num] = phy; |
| } |
| |
| ret = xhci_mtk_phy_init(mtk); |
| if (ret) |
| goto put_usb2_hcd; |
| |
| ret = xhci_mtk_phy_power_on(mtk); |
| if (ret) |
| goto exit_phys; |
| |
| device_init_wakeup(dev, true); |
| |
| xhci = hcd_to_xhci(hcd); |
| xhci->main_hcd = hcd; |
| xhci->shared_hcd = usb_create_shared_hcd(driver, dev, |
| dev_name(dev), hcd); |
| if (!xhci->shared_hcd) { |
| ret = -ENOMEM; |
| goto power_off_phys; |
| } |
| |
| if (HCC_MAX_PSA(xhci->hcc_params) >= 4) |
| xhci->shared_hcd->can_do_streams = 1; |
| |
| ret = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (ret) |
| goto put_usb3_hcd; |
| |
| ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); |
| if (ret) |
| goto dealloc_usb2_hcd; |
| |
| return 0; |
| |
| dealloc_usb2_hcd: |
| usb_remove_hcd(hcd); |
| |
| put_usb3_hcd: |
| xhci_mtk_sch_exit(mtk); |
| usb_put_hcd(xhci->shared_hcd); |
| |
| power_off_phys: |
| xhci_mtk_phy_power_off(mtk); |
| device_init_wakeup(dev, false); |
| |
| exit_phys: |
| xhci_mtk_phy_exit(mtk); |
| |
| put_usb2_hcd: |
| usb_put_hcd(hcd); |
| |
| disable_clk: |
| xhci_mtk_clks_disable(mtk); |
| |
| disable_ldos: |
| xhci_mtk_ldos_disable(mtk); |
| |
| disable_pm: |
| pm_runtime_put_sync(dev); |
| pm_runtime_disable(dev); |
| return ret; |
| } |
| |
| static int xhci_mtk_remove(struct platform_device *dev) |
| { |
| struct xhci_hcd_mtk *mtk = platform_get_drvdata(dev); |
| struct usb_hcd *hcd = mtk->hcd; |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| |
| usb_remove_hcd(xhci->shared_hcd); |
| xhci_mtk_phy_power_off(mtk); |
| xhci_mtk_phy_exit(mtk); |
| device_init_wakeup(&dev->dev, false); |
| |
| usb_remove_hcd(hcd); |
| usb_put_hcd(xhci->shared_hcd); |
| usb_put_hcd(hcd); |
| xhci_mtk_sch_exit(mtk); |
| xhci_mtk_clks_disable(mtk); |
| xhci_mtk_ldos_disable(mtk); |
| pm_runtime_put_sync(&dev->dev); |
| pm_runtime_disable(&dev->dev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int xhci_mtk_suspend(struct device *dev) |
| { |
| struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); |
| |
| xhci_mtk_host_disable(mtk); |
| xhci_mtk_phy_power_off(mtk); |
| xhci_mtk_clks_disable(mtk); |
| usb_wakeup_enable(mtk); |
| return 0; |
| } |
| |
| static int xhci_mtk_resume(struct device *dev) |
| { |
| struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev); |
| |
| usb_wakeup_disable(mtk); |
| xhci_mtk_clks_enable(mtk); |
| xhci_mtk_phy_power_on(mtk); |
| xhci_mtk_host_enable(mtk); |
| return 0; |
| } |
| |
| static const struct dev_pm_ops xhci_mtk_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume) |
| }; |
| #define DEV_PM_OPS (&xhci_mtk_pm_ops) |
| #else |
| #define DEV_PM_OPS NULL |
| #endif /* CONFIG_PM */ |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id mtk_xhci_of_match[] = { |
| { .compatible = "mediatek,mt8173-xhci"}, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, mtk_xhci_of_match); |
| #endif |
| |
| static struct platform_driver mtk_xhci_driver = { |
| .probe = xhci_mtk_probe, |
| .remove = xhci_mtk_remove, |
| .driver = { |
| .name = "xhci-mtk", |
| .pm = DEV_PM_OPS, |
| .of_match_table = of_match_ptr(mtk_xhci_of_match), |
| }, |
| }; |
| MODULE_ALIAS("platform:xhci-mtk"); |
| |
| static int __init xhci_mtk_init(void) |
| { |
| xhci_init_driver(&xhci_mtk_hc_driver, &xhci_mtk_overrides); |
| return platform_driver_register(&mtk_xhci_driver); |
| } |
| module_init(xhci_mtk_init); |
| |
| static void __exit xhci_mtk_exit(void) |
| { |
| platform_driver_unregister(&mtk_xhci_driver); |
| } |
| module_exit(xhci_mtk_exit); |
| |
| MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@mediatek.com>"); |
| MODULE_DESCRIPTION("MediaTek xHCI Host Controller Driver"); |
| MODULE_LICENSE("GPL v2"); |