| /* |
| * linux/arch/arm/mach-omap2/clock.h |
| * |
| * Copyright (C) 2005-2009 Texas Instruments, Inc. |
| * Copyright (C) 2004-2011 Nokia Corporation |
| * |
| * Contacts: |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * Paul Walmsley |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H |
| #define __ARCH_ARM_MACH_OMAP2_CLOCK_H |
| |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| |
| #include <linux/clkdev.h> |
| #include <linux/clk-provider.h> |
| |
| struct omap_clk { |
| u16 cpu; |
| struct clk_lookup lk; |
| }; |
| |
| #define CLK(dev, con, ck) \ |
| { \ |
| .lk = { \ |
| .dev_id = dev, \ |
| .con_id = con, \ |
| .clk = ck, \ |
| }, \ |
| } |
| |
| struct clockdomain; |
| #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) |
| |
| #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \ |
| static struct clk _name = { \ |
| .name = #_name, \ |
| .hw = &_name##_hw.hw, \ |
| .parent_names = _parent_array_name, \ |
| .num_parents = ARRAY_SIZE(_parent_array_name), \ |
| .ops = &_clkops_name, \ |
| }; |
| |
| #define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name, \ |
| _clkops_name, _flags) \ |
| static struct clk _name = { \ |
| .name = #_name, \ |
| .hw = &_name##_hw.hw, \ |
| .parent_names = _parent_array_name, \ |
| .num_parents = ARRAY_SIZE(_parent_array_name), \ |
| .ops = &_clkops_name, \ |
| .flags = _flags, \ |
| }; |
| |
| #define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name) \ |
| static struct clk_hw_omap _name##_hw = { \ |
| .hw = { \ |
| .clk = &_name, \ |
| }, \ |
| .clkdm_name = _clkdm_name, \ |
| }; |
| |
| #define DEFINE_CLK_OMAP_MUX(_name, _clkdm_name, _clksel, \ |
| _clksel_reg, _clksel_mask, \ |
| _parent_names, _ops) \ |
| static struct clk _name; \ |
| static struct clk_hw_omap _name##_hw = { \ |
| .hw = { \ |
| .clk = &_name, \ |
| }, \ |
| .clksel = _clksel, \ |
| .clksel_reg = _clksel_reg, \ |
| .clksel_mask = _clksel_mask, \ |
| .clkdm_name = _clkdm_name, \ |
| }; \ |
| DEFINE_STRUCT_CLK(_name, _parent_names, _ops); |
| |
| #define DEFINE_CLK_OMAP_MUX_GATE(_name, _clkdm_name, _clksel, \ |
| _clksel_reg, _clksel_mask, \ |
| _enable_reg, _enable_bit, \ |
| _hwops, _parent_names, _ops) \ |
| static struct clk _name; \ |
| static struct clk_hw_omap _name##_hw = { \ |
| .hw = { \ |
| .clk = &_name, \ |
| }, \ |
| .ops = _hwops, \ |
| .enable_reg = _enable_reg, \ |
| .enable_bit = _enable_bit, \ |
| .clksel = _clksel, \ |
| .clksel_reg = _clksel_reg, \ |
| .clksel_mask = _clksel_mask, \ |
| .clkdm_name = _clkdm_name, \ |
| }; \ |
| DEFINE_STRUCT_CLK(_name, _parent_names, _ops); |
| |
| #define DEFINE_CLK_OMAP_HSDIVIDER(_name, _parent_name, \ |
| _parent_ptr, _flags, \ |
| _clksel_reg, _clksel_mask) \ |
| static const struct clksel _name##_div[] = { \ |
| { \ |
| .parent = _parent_ptr, \ |
| .rates = div31_1to31_rates \ |
| }, \ |
| { .parent = NULL }, \ |
| }; \ |
| static struct clk _name; \ |
| static const char *_name##_parent_names[] = { \ |
| _parent_name, \ |
| }; \ |
| static struct clk_hw_omap _name##_hw = { \ |
| .hw = { \ |
| .clk = &_name, \ |
| }, \ |
| .clksel = _name##_div, \ |
| .clksel_reg = _clksel_reg, \ |
| .clksel_mask = _clksel_mask, \ |
| .ops = &clkhwops_omap4_dpllmx, \ |
| }; \ |
| DEFINE_STRUCT_CLK(_name, _name##_parent_names, omap_hsdivider_ops); |
| |
| /* struct clksel_rate.flags possibilities */ |
| #define RATE_IN_242X (1 << 0) |
| #define RATE_IN_243X (1 << 1) |
| #define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */ |
| #define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */ |
| #define RATE_IN_36XX (1 << 4) |
| #define RATE_IN_4430 (1 << 5) |
| #define RATE_IN_TI816X (1 << 6) |
| #define RATE_IN_4460 (1 << 7) |
| #define RATE_IN_AM33XX (1 << 8) |
| #define RATE_IN_TI814X (1 << 9) |
| |
| #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) |
| #define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) |
| #define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) |
| #define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) |
| |
| /* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ |
| #define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) |
| |
| |
| /** |
| * struct clksel_rate - register bitfield values corresponding to clk divisors |
| * @val: register bitfield value (shifted to bit 0) |
| * @div: clock divisor corresponding to @val |
| * @flags: (see "struct clksel_rate.flags possibilities" above) |
| * |
| * @val should match the value of a read from struct clk.clksel_reg |
| * AND'ed with struct clk.clksel_mask, shifted right to bit 0. |
| * |
| * @div is the divisor that should be applied to the parent clock's rate |
| * to produce the current clock's rate. |
| */ |
| struct clksel_rate { |
| u32 val; |
| u8 div; |
| u16 flags; |
| }; |
| |
| /** |
| * struct clksel - available parent clocks, and a pointer to their divisors |
| * @parent: struct clk * to a possible parent clock |
| * @rates: available divisors for this parent clock |
| * |
| * A struct clksel is always associated with one or more struct clks |
| * and one or more struct clksel_rates. |
| */ |
| struct clksel { |
| struct clk *parent; |
| const struct clksel_rate *rates; |
| }; |
| |
| /** |
| * struct dpll_data - DPLL registers and integration data |
| * @mult_div1_reg: register containing the DPLL M and N bitfields |
| * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg |
| * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg |
| * @clk_bypass: struct clk pointer to the clock's bypass clock input |
| * @clk_ref: struct clk pointer to the clock's reference clock input |
| * @control_reg: register containing the DPLL mode bitfield |
| * @enable_mask: mask of the DPLL mode bitfield in @control_reg |
| * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() |
| * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() |
| * @last_rounded_m4xen: cache of the last M4X result of |
| * omap4_dpll_regm4xen_round_rate() |
| * @last_rounded_lpmode: cache of the last lpmode result of |
| * omap4_dpll_lpmode_recalc() |
| * @max_multiplier: maximum valid non-bypass multiplier value (actual) |
| * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() |
| * @min_divider: minimum valid non-bypass divider value (actual) |
| * @max_divider: maximum valid non-bypass divider value (actual) |
| * @modes: possible values of @enable_mask |
| * @autoidle_reg: register containing the DPLL autoidle mode bitfield |
| * @idlest_reg: register containing the DPLL idle status bitfield |
| * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg |
| * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg |
| * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg |
| * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg |
| * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg |
| * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg |
| * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs |
| * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs |
| * @flags: DPLL type/features (see below) |
| * |
| * Possible values for @flags: |
| * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) |
| * |
| * @freqsel_mask is only used on the OMAP34xx family and AM35xx. |
| * |
| * XXX Some DPLLs have multiple bypass inputs, so it's not technically |
| * correct to only have one @clk_bypass pointer. |
| * |
| * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, |
| * @last_rounded_n) should be separated from the runtime-fixed fields |
| * and placed into a different structure, so that the runtime-fixed data |
| * can be placed into read-only space. |
| */ |
| struct dpll_data { |
| void __iomem *mult_div1_reg; |
| u32 mult_mask; |
| u32 div1_mask; |
| struct clk *clk_bypass; |
| struct clk *clk_ref; |
| void __iomem *control_reg; |
| u32 enable_mask; |
| unsigned long last_rounded_rate; |
| u16 last_rounded_m; |
| u8 last_rounded_m4xen; |
| u8 last_rounded_lpmode; |
| u16 max_multiplier; |
| u8 last_rounded_n; |
| u8 min_divider; |
| u16 max_divider; |
| u8 modes; |
| void __iomem *autoidle_reg; |
| void __iomem *idlest_reg; |
| u32 autoidle_mask; |
| u32 freqsel_mask; |
| u32 idlest_mask; |
| u32 dco_mask; |
| u32 sddiv_mask; |
| u32 lpmode_mask; |
| u32 m4xen_mask; |
| u8 auto_recal_bit; |
| u8 recal_en_bit; |
| u8 recal_st_bit; |
| u8 flags; |
| }; |
| |
| /* |
| * struct clk.flags possibilities |
| * |
| * XXX document the rest of the clock flags here |
| * |
| * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL |
| * bits share the same register. This flag allows the |
| * omap4_dpllmx*() code to determine which GATE_CTRL bit field |
| * should be used. This is a temporary solution - a better approach |
| * would be to associate clock type-specific data with the clock, |
| * similar to the struct dpll_data approach. |
| */ |
| #define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ |
| #define CLOCK_IDLE_CONTROL (1 << 1) |
| #define CLOCK_NO_IDLE_PARENT (1 << 2) |
| #define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ |
| #define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ |
| #define CLOCK_CLKOUTX2 (1 << 5) |
| |
| /** |
| * struct clk_hw_omap - OMAP struct clk |
| * @node: list_head connecting this clock into the full clock list |
| * @enable_reg: register to write to enable the clock (see @enable_bit) |
| * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) |
| * @flags: see "struct clk.flags possibilities" above |
| * @clksel_reg: for clksel clks, register va containing src/divisor select |
| * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector |
| * @clksel: for clksel clks, pointer to struct clksel for this clock |
| * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock |
| * @clkdm_name: clockdomain name that this clock is contained in |
| * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime |
| * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) |
| * @src_offset: bitshift for source selection bitfield (OMAP1 only) |
| * |
| * XXX @rate_offset, @src_offset should probably be removed and OMAP1 |
| * clock code converted to use clksel. |
| * |
| */ |
| |
| struct clk_hw_omap_ops; |
| |
| struct clk_hw_omap { |
| struct clk_hw hw; |
| struct list_head node; |
| unsigned long fixed_rate; |
| u8 fixed_div; |
| void __iomem *enable_reg; |
| u8 enable_bit; |
| u8 flags; |
| void __iomem *clksel_reg; |
| u32 clksel_mask; |
| const struct clksel *clksel; |
| struct dpll_data *dpll_data; |
| const char *clkdm_name; |
| struct clockdomain *clkdm; |
| const struct clk_hw_omap_ops *ops; |
| }; |
| |
| struct clk_hw_omap_ops { |
| void (*find_idlest)(struct clk_hw_omap *oclk, |
| void __iomem **idlest_reg, |
| u8 *idlest_bit, u8 *idlest_val); |
| void (*find_companion)(struct clk_hw_omap *oclk, |
| void __iomem **other_reg, |
| u8 *other_bit); |
| void (*allow_idle)(struct clk_hw_omap *oclk); |
| void (*deny_idle)(struct clk_hw_omap *oclk); |
| }; |
| |
| unsigned long omap_fixed_divisor_recalc(struct clk_hw *hw, |
| unsigned long parent_rate); |
| |
| /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */ |
| #define CORE_CLK_SRC_32K 0x0 |
| #define CORE_CLK_SRC_DPLL 0x1 |
| #define CORE_CLK_SRC_DPLL_X2 0x2 |
| |
| /* OMAP2xxx CM_CLKEN_PLL.EN_DPLL bits - for omap2_get_dpll_rate() */ |
| #define OMAP2XXX_EN_DPLL_LPBYPASS 0x1 |
| #define OMAP2XXX_EN_DPLL_FRBYPASS 0x2 |
| #define OMAP2XXX_EN_DPLL_LOCKED 0x3 |
| |
| /* OMAP3xxx CM_CLKEN_PLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */ |
| #define OMAP3XXX_EN_DPLL_LPBYPASS 0x5 |
| #define OMAP3XXX_EN_DPLL_FRBYPASS 0x6 |
| #define OMAP3XXX_EN_DPLL_LOCKED 0x7 |
| |
| /* OMAP4xxx CM_CLKMODE_DPLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */ |
| #define OMAP4XXX_EN_DPLL_MNBYPASS 0x4 |
| #define OMAP4XXX_EN_DPLL_LPBYPASS 0x5 |
| #define OMAP4XXX_EN_DPLL_FRBYPASS 0x6 |
| #define OMAP4XXX_EN_DPLL_LOCKED 0x7 |
| |
| /* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ |
| #define DPLL_LOW_POWER_STOP 0x1 |
| #define DPLL_LOW_POWER_BYPASS 0x5 |
| #define DPLL_LOCKED 0x7 |
| |
| /* DPLL Type and DCO Selection Flags */ |
| #define DPLL_J_TYPE 0x1 |
| |
| long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, |
| unsigned long *parent_rate); |
| unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); |
| int omap3_noncore_dpll_enable(struct clk_hw *hw); |
| void omap3_noncore_dpll_disable(struct clk_hw *hw); |
| int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate); |
| u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk); |
| void omap3_dpll_allow_idle(struct clk_hw_omap *clk); |
| void omap3_dpll_deny_idle(struct clk_hw_omap *clk); |
| unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, |
| unsigned long parent_rate); |
| int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk); |
| void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk); |
| void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk); |
| unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, |
| unsigned long parent_rate); |
| long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, |
| unsigned long target_rate, |
| unsigned long *parent_rate); |
| |
| void omap2_init_clk_clkdm(struct clk_hw *clk); |
| void __init omap2_clk_disable_clkdm_control(void); |
| |
| /* clkt_clksel.c public functions */ |
| u32 omap2_clksel_round_rate_div(struct clk_hw_omap *clk, |
| unsigned long target_rate, |
| u32 *new_div); |
| u8 omap2_clksel_find_parent_index(struct clk_hw *hw); |
| unsigned long omap2_clksel_recalc(struct clk_hw *hw, unsigned long parent_rate); |
| long omap2_clksel_round_rate(struct clk_hw *hw, unsigned long target_rate, |
| unsigned long *parent_rate); |
| int omap2_clksel_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate); |
| int omap2_clksel_set_parent(struct clk_hw *hw, u8 field_val); |
| |
| /* clkt_iclk.c public functions */ |
| extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk); |
| extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk); |
| |
| u8 omap2_init_dpll_parent(struct clk_hw *hw); |
| unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk); |
| |
| int omap2_dflt_clk_enable(struct clk_hw *hw); |
| void omap2_dflt_clk_disable(struct clk_hw *hw); |
| int omap2_dflt_clk_is_enabled(struct clk_hw *hw); |
| void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, |
| void __iomem **other_reg, |
| u8 *other_bit); |
| void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, |
| void __iomem **idlest_reg, |
| u8 *idlest_bit, u8 *idlest_val); |
| void omap2_init_clk_hw_omap_clocks(struct clk *clk); |
| int omap2_clk_enable_autoidle_all(void); |
| int omap2_clk_disable_autoidle_all(void); |
| void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); |
| int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name); |
| void omap2_clk_print_new_rates(const char *hfclkin_ck_name, |
| const char *core_ck_name, |
| const char *mpu_ck_name); |
| |
| extern u16 cpu_mask; |
| |
| extern const struct clkops clkops_omap2_dflt_wait; |
| extern const struct clkops clkops_dummy; |
| extern const struct clkops clkops_omap2_dflt; |
| |
| extern struct clk_functions omap2_clk_functions; |
| |
| extern const struct clksel_rate gpt_32k_rates[]; |
| extern const struct clksel_rate gpt_sys_rates[]; |
| extern const struct clksel_rate gfx_l3_rates[]; |
| extern const struct clksel_rate dsp_ick_rates[]; |
| extern struct clk dummy_ck; |
| |
| extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; |
| extern const struct clk_hw_omap_ops clkhwops_iclk_wait; |
| extern const struct clk_hw_omap_ops clkhwops_wait; |
| extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; |
| extern const struct clk_hw_omap_ops clkhwops_iclk; |
| extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait; |
| extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait; |
| extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; |
| extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait; |
| extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait; |
| extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; |
| extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; |
| extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait; |
| extern const struct clk_hw_omap_ops clkhwops_apll54; |
| extern const struct clk_hw_omap_ops clkhwops_apll96; |
| extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; |
| extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; |
| |
| /* clksel_rate blocks shared between OMAP44xx and AM33xx */ |
| extern const struct clksel_rate div_1_0_rates[]; |
| extern const struct clksel_rate div3_1to4_rates[]; |
| extern const struct clksel_rate div_1_1_rates[]; |
| extern const struct clksel_rate div_1_2_rates[]; |
| extern const struct clksel_rate div_1_3_rates[]; |
| extern const struct clksel_rate div_1_4_rates[]; |
| extern const struct clksel_rate div31_1to31_rates[]; |
| |
| extern int am33xx_clk_init(void); |
| |
| extern int omap2_clkops_enable_clkdm(struct clk_hw *hw); |
| extern void omap2_clkops_disable_clkdm(struct clk_hw *hw); |
| |
| extern void omap_clocks_register(struct omap_clk *oclks, int cnt); |
| #endif |