| /* exynos_drm_fimd.c |
| * |
| * Copyright (C) 2011 Samsung Electronics Co.Ltd |
| * Authors: |
| * Joonyoung Shim <jy0922.shim@samsung.com> |
| * Inki Dae <inki.dae@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| #include <drm/drmP.h> |
| |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/component.h> |
| |
| #include <video/of_display_timing.h> |
| #include <video/of_videomode.h> |
| #include <video/samsung_fimd.h> |
| #include <drm/exynos_drm.h> |
| |
| #include "exynos_drm_drv.h" |
| #include "exynos_drm_fbdev.h" |
| #include "exynos_drm_crtc.h" |
| #include "exynos_drm_iommu.h" |
| |
| /* |
| * FIMD stands for Fully Interactive Mobile Display and |
| * as a display controller, it transfers contents drawn on memory |
| * to a LCD Panel through Display Interfaces such as RGB or |
| * CPU Interface. |
| */ |
| |
| #define FIMD_DEFAULT_FRAMERATE 60 |
| #define MIN_FB_WIDTH_FOR_16WORD_BURST 128 |
| |
| /* position control register for hardware window 0, 2 ~ 4.*/ |
| #define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16) |
| #define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16) |
| /* |
| * size control register for hardware windows 0 and alpha control register |
| * for hardware windows 1 ~ 4 |
| */ |
| #define VIDOSD_C(win) (VIDOSD_BASE + 0x08 + (win) * 16) |
| /* size control register for hardware windows 1 ~ 2. */ |
| #define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16) |
| |
| #define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8) |
| #define VIDWx_BUF_END(win, buf) (VIDW_BUF_END(buf) + (win) * 8) |
| #define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4) |
| |
| /* color key control register for hardware window 1 ~ 4. */ |
| #define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + ((x - 1) * 8)) |
| /* color key value register for hardware window 1 ~ 4. */ |
| #define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + ((x - 1) * 8)) |
| |
| /* FIMD has totally five hardware windows. */ |
| #define WINDOWS_NR 5 |
| |
| #define get_fimd_manager(mgr) platform_get_drvdata(to_platform_device(dev)) |
| |
| struct fimd_driver_data { |
| unsigned int timing_base; |
| |
| unsigned int has_shadowcon:1; |
| unsigned int has_clksel:1; |
| unsigned int has_limited_fmt:1; |
| }; |
| |
| static struct fimd_driver_data s3c64xx_fimd_driver_data = { |
| .timing_base = 0x0, |
| .has_clksel = 1, |
| .has_limited_fmt = 1, |
| }; |
| |
| static struct fimd_driver_data exynos4_fimd_driver_data = { |
| .timing_base = 0x0, |
| .has_shadowcon = 1, |
| }; |
| |
| static struct fimd_driver_data exynos5_fimd_driver_data = { |
| .timing_base = 0x20000, |
| .has_shadowcon = 1, |
| }; |
| |
| struct fimd_win_data { |
| unsigned int offset_x; |
| unsigned int offset_y; |
| unsigned int ovl_width; |
| unsigned int ovl_height; |
| unsigned int fb_width; |
| unsigned int fb_height; |
| unsigned int bpp; |
| unsigned int pixel_format; |
| dma_addr_t dma_addr; |
| unsigned int buf_offsize; |
| unsigned int line_size; /* bytes */ |
| bool enabled; |
| bool resume; |
| }; |
| |
| struct fimd_context { |
| struct device *dev; |
| struct drm_device *drm_dev; |
| struct clk *bus_clk; |
| struct clk *lcd_clk; |
| void __iomem *regs; |
| struct drm_display_mode mode; |
| struct fimd_win_data win_data[WINDOWS_NR]; |
| unsigned int default_win; |
| unsigned long irq_flags; |
| u32 vidcon1; |
| bool suspended; |
| int pipe; |
| wait_queue_head_t wait_vsync_queue; |
| atomic_t wait_vsync_event; |
| |
| struct exynos_drm_panel_info panel; |
| struct fimd_driver_data *driver_data; |
| struct exynos_drm_display *display; |
| }; |
| |
| static const struct of_device_id fimd_driver_dt_match[] = { |
| { .compatible = "samsung,s3c6400-fimd", |
| .data = &s3c64xx_fimd_driver_data }, |
| { .compatible = "samsung,exynos4210-fimd", |
| .data = &exynos4_fimd_driver_data }, |
| { .compatible = "samsung,exynos5250-fimd", |
| .data = &exynos5_fimd_driver_data }, |
| {}, |
| }; |
| |
| static inline struct fimd_driver_data *drm_fimd_get_driver_data( |
| struct platform_device *pdev) |
| { |
| const struct of_device_id *of_id = |
| of_match_device(fimd_driver_dt_match, &pdev->dev); |
| |
| return (struct fimd_driver_data *)of_id->data; |
| } |
| |
| static void fimd_wait_for_vblank(struct exynos_drm_manager *mgr) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| |
| if (ctx->suspended) |
| return; |
| |
| atomic_set(&ctx->wait_vsync_event, 1); |
| |
| /* |
| * wait for FIMD to signal VSYNC interrupt or return after |
| * timeout which is set to 50ms (refresh rate of 20). |
| */ |
| if (!wait_event_timeout(ctx->wait_vsync_queue, |
| !atomic_read(&ctx->wait_vsync_event), |
| HZ/20)) |
| DRM_DEBUG_KMS("vblank wait timed out.\n"); |
| } |
| |
| |
| static void fimd_clear_channel(struct exynos_drm_manager *mgr) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| int win, ch_enabled = 0; |
| |
| DRM_DEBUG_KMS("%s\n", __FILE__); |
| |
| /* Check if any channel is enabled. */ |
| for (win = 0; win < WINDOWS_NR; win++) { |
| u32 val = readl(ctx->regs + SHADOWCON); |
| if (val & SHADOWCON_CHx_ENABLE(win)) { |
| val &= ~SHADOWCON_CHx_ENABLE(win); |
| writel(val, ctx->regs + SHADOWCON); |
| ch_enabled = 1; |
| } |
| } |
| |
| /* Wait for vsync, as disable channel takes effect at next vsync */ |
| if (ch_enabled) |
| fimd_wait_for_vblank(mgr); |
| } |
| |
| static int fimd_mgr_initialize(struct exynos_drm_manager *mgr, |
| struct drm_device *drm_dev) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| struct exynos_drm_private *priv; |
| priv = drm_dev->dev_private; |
| |
| mgr->drm_dev = ctx->drm_dev = drm_dev; |
| mgr->pipe = ctx->pipe = priv->pipe++; |
| |
| /* |
| * enable drm irq mode. |
| * - with irq_enabled = true, we can use the vblank feature. |
| * |
| * P.S. note that we wouldn't use drm irq handler but |
| * just specific driver own one instead because |
| * drm framework supports only one irq handler. |
| */ |
| drm_dev->irq_enabled = true; |
| |
| /* |
| * with vblank_disable_allowed = true, vblank interrupt will be disabled |
| * by drm timer once a current process gives up ownership of |
| * vblank event.(after drm_vblank_put function is called) |
| */ |
| drm_dev->vblank_disable_allowed = true; |
| |
| /* attach this sub driver to iommu mapping if supported. */ |
| if (is_drm_iommu_supported(ctx->drm_dev)) { |
| /* |
| * If any channel is already active, iommu will throw |
| * a PAGE FAULT when enabled. So clear any channel if enabled. |
| */ |
| fimd_clear_channel(mgr); |
| drm_iommu_attach_device(ctx->drm_dev, ctx->dev); |
| } |
| |
| return 0; |
| } |
| |
| static void fimd_mgr_remove(struct exynos_drm_manager *mgr) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| |
| /* detach this sub driver from iommu mapping if supported. */ |
| if (is_drm_iommu_supported(ctx->drm_dev)) |
| drm_iommu_detach_device(ctx->drm_dev, ctx->dev); |
| } |
| |
| static u32 fimd_calc_clkdiv(struct fimd_context *ctx, |
| const struct drm_display_mode *mode) |
| { |
| unsigned long ideal_clk = mode->htotal * mode->vtotal * mode->vrefresh; |
| u32 clkdiv; |
| |
| /* Find the clock divider value that gets us closest to ideal_clk */ |
| clkdiv = DIV_ROUND_UP(clk_get_rate(ctx->lcd_clk), ideal_clk); |
| |
| return (clkdiv < 0x100) ? clkdiv : 0xff; |
| } |
| |
| static bool fimd_mode_fixup(struct exynos_drm_manager *mgr, |
| const struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| if (adjusted_mode->vrefresh == 0) |
| adjusted_mode->vrefresh = FIMD_DEFAULT_FRAMERATE; |
| |
| return true; |
| } |
| |
| static void fimd_mode_set(struct exynos_drm_manager *mgr, |
| const struct drm_display_mode *in_mode) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| |
| drm_mode_copy(&ctx->mode, in_mode); |
| } |
| |
| static void fimd_commit(struct exynos_drm_manager *mgr) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| struct drm_display_mode *mode = &ctx->mode; |
| struct fimd_driver_data *driver_data; |
| u32 val, clkdiv, vidcon1; |
| int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd; |
| |
| driver_data = ctx->driver_data; |
| if (ctx->suspended) |
| return; |
| |
| /* nothing to do if we haven't set the mode yet */ |
| if (mode->htotal == 0 || mode->vtotal == 0) |
| return; |
| |
| /* setup polarity values */ |
| vidcon1 = ctx->vidcon1; |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| vidcon1 |= VIDCON1_INV_VSYNC; |
| if (mode->flags & DRM_MODE_FLAG_NHSYNC) |
| vidcon1 |= VIDCON1_INV_HSYNC; |
| writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1); |
| |
| /* setup vertical timing values. */ |
| vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start; |
| vbpd = mode->crtc_vtotal - mode->crtc_vsync_end; |
| vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay; |
| |
| val = VIDTCON0_VBPD(vbpd - 1) | |
| VIDTCON0_VFPD(vfpd - 1) | |
| VIDTCON0_VSPW(vsync_len - 1); |
| writel(val, ctx->regs + driver_data->timing_base + VIDTCON0); |
| |
| /* setup horizontal timing values. */ |
| hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start; |
| hbpd = mode->crtc_htotal - mode->crtc_hsync_end; |
| hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay; |
| |
| val = VIDTCON1_HBPD(hbpd - 1) | |
| VIDTCON1_HFPD(hfpd - 1) | |
| VIDTCON1_HSPW(hsync_len - 1); |
| writel(val, ctx->regs + driver_data->timing_base + VIDTCON1); |
| |
| /* setup horizontal and vertical display size. */ |
| val = VIDTCON2_LINEVAL(mode->vdisplay - 1) | |
| VIDTCON2_HOZVAL(mode->hdisplay - 1) | |
| VIDTCON2_LINEVAL_E(mode->vdisplay - 1) | |
| VIDTCON2_HOZVAL_E(mode->hdisplay - 1); |
| writel(val, ctx->regs + driver_data->timing_base + VIDTCON2); |
| |
| /* |
| * fields of register with prefix '_F' would be updated |
| * at vsync(same as dma start) |
| */ |
| val = VIDCON0_ENVID | VIDCON0_ENVID_F; |
| |
| if (ctx->driver_data->has_clksel) |
| val |= VIDCON0_CLKSEL_LCD; |
| |
| clkdiv = fimd_calc_clkdiv(ctx, mode); |
| if (clkdiv > 1) |
| val |= VIDCON0_CLKVAL_F(clkdiv - 1) | VIDCON0_CLKDIR; |
| |
| writel(val, ctx->regs + VIDCON0); |
| } |
| |
| static int fimd_enable_vblank(struct exynos_drm_manager *mgr) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| u32 val; |
| |
| if (ctx->suspended) |
| return -EPERM; |
| |
| if (!test_and_set_bit(0, &ctx->irq_flags)) { |
| val = readl(ctx->regs + VIDINTCON0); |
| |
| val |= VIDINTCON0_INT_ENABLE; |
| val |= VIDINTCON0_INT_FRAME; |
| |
| val &= ~VIDINTCON0_FRAMESEL0_MASK; |
| val |= VIDINTCON0_FRAMESEL0_VSYNC; |
| val &= ~VIDINTCON0_FRAMESEL1_MASK; |
| val |= VIDINTCON0_FRAMESEL1_NONE; |
| |
| writel(val, ctx->regs + VIDINTCON0); |
| } |
| |
| return 0; |
| } |
| |
| static void fimd_disable_vblank(struct exynos_drm_manager *mgr) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| u32 val; |
| |
| if (ctx->suspended) |
| return; |
| |
| if (test_and_clear_bit(0, &ctx->irq_flags)) { |
| val = readl(ctx->regs + VIDINTCON0); |
| |
| val &= ~VIDINTCON0_INT_FRAME; |
| val &= ~VIDINTCON0_INT_ENABLE; |
| |
| writel(val, ctx->regs + VIDINTCON0); |
| } |
| } |
| |
| static void fimd_win_mode_set(struct exynos_drm_manager *mgr, |
| struct exynos_drm_overlay *overlay) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| struct fimd_win_data *win_data; |
| int win; |
| unsigned long offset; |
| |
| if (!overlay) { |
| DRM_ERROR("overlay is NULL\n"); |
| return; |
| } |
| |
| win = overlay->zpos; |
| if (win == DEFAULT_ZPOS) |
| win = ctx->default_win; |
| |
| if (win < 0 || win >= WINDOWS_NR) |
| return; |
| |
| offset = overlay->fb_x * (overlay->bpp >> 3); |
| offset += overlay->fb_y * overlay->pitch; |
| |
| DRM_DEBUG_KMS("offset = 0x%lx, pitch = %x\n", offset, overlay->pitch); |
| |
| win_data = &ctx->win_data[win]; |
| |
| win_data->offset_x = overlay->crtc_x; |
| win_data->offset_y = overlay->crtc_y; |
| win_data->ovl_width = overlay->crtc_width; |
| win_data->ovl_height = overlay->crtc_height; |
| win_data->fb_width = overlay->fb_width; |
| win_data->fb_height = overlay->fb_height; |
| win_data->dma_addr = overlay->dma_addr[0] + offset; |
| win_data->bpp = overlay->bpp; |
| win_data->pixel_format = overlay->pixel_format; |
| win_data->buf_offsize = (overlay->fb_width - overlay->crtc_width) * |
| (overlay->bpp >> 3); |
| win_data->line_size = overlay->crtc_width * (overlay->bpp >> 3); |
| |
| DRM_DEBUG_KMS("offset_x = %d, offset_y = %d\n", |
| win_data->offset_x, win_data->offset_y); |
| DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n", |
| win_data->ovl_width, win_data->ovl_height); |
| DRM_DEBUG_KMS("paddr = 0x%lx\n", (unsigned long)win_data->dma_addr); |
| DRM_DEBUG_KMS("fb_width = %d, crtc_width = %d\n", |
| overlay->fb_width, overlay->crtc_width); |
| } |
| |
| static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win) |
| { |
| struct fimd_win_data *win_data = &ctx->win_data[win]; |
| unsigned long val; |
| |
| val = WINCONx_ENWIN; |
| |
| /* |
| * In case of s3c64xx, window 0 doesn't support alpha channel. |
| * So the request format is ARGB8888 then change it to XRGB8888. |
| */ |
| if (ctx->driver_data->has_limited_fmt && !win) { |
| if (win_data->pixel_format == DRM_FORMAT_ARGB8888) |
| win_data->pixel_format = DRM_FORMAT_XRGB8888; |
| } |
| |
| switch (win_data->pixel_format) { |
| case DRM_FORMAT_C8: |
| val |= WINCON0_BPPMODE_8BPP_PALETTE; |
| val |= WINCONx_BURSTLEN_8WORD; |
| val |= WINCONx_BYTSWP; |
| break; |
| case DRM_FORMAT_XRGB1555: |
| val |= WINCON0_BPPMODE_16BPP_1555; |
| val |= WINCONx_HAWSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_RGB565: |
| val |= WINCON0_BPPMODE_16BPP_565; |
| val |= WINCONx_HAWSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_XRGB8888: |
| val |= WINCON0_BPPMODE_24BPP_888; |
| val |= WINCONx_WSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| case DRM_FORMAT_ARGB8888: |
| val |= WINCON1_BPPMODE_25BPP_A1888 |
| | WINCON1_BLD_PIX | WINCON1_ALPHA_SEL; |
| val |= WINCONx_WSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| default: |
| DRM_DEBUG_KMS("invalid pixel size so using unpacked 24bpp.\n"); |
| |
| val |= WINCON0_BPPMODE_24BPP_888; |
| val |= WINCONx_WSWP; |
| val |= WINCONx_BURSTLEN_16WORD; |
| break; |
| } |
| |
| DRM_DEBUG_KMS("bpp = %d\n", win_data->bpp); |
| |
| /* |
| * In case of exynos, setting dma-burst to 16Word causes permanent |
| * tearing for very small buffers, e.g. cursor buffer. Burst Mode |
| * switching which is based on overlay size is not recommended as |
| * overlay size varies alot towards the end of the screen and rapid |
| * movement causes unstable DMA which results into iommu crash/tear. |
| */ |
| |
| if (win_data->fb_width < MIN_FB_WIDTH_FOR_16WORD_BURST) { |
| val &= ~WINCONx_BURSTLEN_MASK; |
| val |= WINCONx_BURSTLEN_4WORD; |
| } |
| |
| writel(val, ctx->regs + WINCON(win)); |
| } |
| |
| static void fimd_win_set_colkey(struct fimd_context *ctx, unsigned int win) |
| { |
| unsigned int keycon0 = 0, keycon1 = 0; |
| |
| keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F | |
| WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0); |
| |
| keycon1 = WxKEYCON1_COLVAL(0xffffffff); |
| |
| writel(keycon0, ctx->regs + WKEYCON0_BASE(win)); |
| writel(keycon1, ctx->regs + WKEYCON1_BASE(win)); |
| } |
| |
| /** |
| * shadow_protect_win() - disable updating values from shadow registers at vsync |
| * |
| * @win: window to protect registers for |
| * @protect: 1 to protect (disable updates) |
| */ |
| static void fimd_shadow_protect_win(struct fimd_context *ctx, |
| int win, bool protect) |
| { |
| u32 reg, bits, val; |
| |
| if (ctx->driver_data->has_shadowcon) { |
| reg = SHADOWCON; |
| bits = SHADOWCON_WINx_PROTECT(win); |
| } else { |
| reg = PRTCON; |
| bits = PRTCON_PROTECT; |
| } |
| |
| val = readl(ctx->regs + reg); |
| if (protect) |
| val |= bits; |
| else |
| val &= ~bits; |
| writel(val, ctx->regs + reg); |
| } |
| |
| static void fimd_win_commit(struct exynos_drm_manager *mgr, int zpos) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| struct fimd_win_data *win_data; |
| int win = zpos; |
| unsigned long val, alpha, size; |
| unsigned int last_x; |
| unsigned int last_y; |
| |
| if (ctx->suspended) |
| return; |
| |
| if (win == DEFAULT_ZPOS) |
| win = ctx->default_win; |
| |
| if (win < 0 || win >= WINDOWS_NR) |
| return; |
| |
| win_data = &ctx->win_data[win]; |
| |
| /* If suspended, enable this on resume */ |
| if (ctx->suspended) { |
| win_data->resume = true; |
| return; |
| } |
| |
| /* |
| * SHADOWCON/PRTCON register is used for enabling timing. |
| * |
| * for example, once only width value of a register is set, |
| * if the dma is started then fimd hardware could malfunction so |
| * with protect window setting, the register fields with prefix '_F' |
| * wouldn't be updated at vsync also but updated once unprotect window |
| * is set. |
| */ |
| |
| /* protect windows */ |
| fimd_shadow_protect_win(ctx, win, true); |
| |
| /* buffer start address */ |
| val = (unsigned long)win_data->dma_addr; |
| writel(val, ctx->regs + VIDWx_BUF_START(win, 0)); |
| |
| /* buffer end address */ |
| size = win_data->fb_width * win_data->ovl_height * (win_data->bpp >> 3); |
| val = (unsigned long)(win_data->dma_addr + size); |
| writel(val, ctx->regs + VIDWx_BUF_END(win, 0)); |
| |
| DRM_DEBUG_KMS("start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n", |
| (unsigned long)win_data->dma_addr, val, size); |
| DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n", |
| win_data->ovl_width, win_data->ovl_height); |
| |
| /* buffer size */ |
| val = VIDW_BUF_SIZE_OFFSET(win_data->buf_offsize) | |
| VIDW_BUF_SIZE_PAGEWIDTH(win_data->line_size) | |
| VIDW_BUF_SIZE_OFFSET_E(win_data->buf_offsize) | |
| VIDW_BUF_SIZE_PAGEWIDTH_E(win_data->line_size); |
| writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0)); |
| |
| /* OSD position */ |
| val = VIDOSDxA_TOPLEFT_X(win_data->offset_x) | |
| VIDOSDxA_TOPLEFT_Y(win_data->offset_y) | |
| VIDOSDxA_TOPLEFT_X_E(win_data->offset_x) | |
| VIDOSDxA_TOPLEFT_Y_E(win_data->offset_y); |
| writel(val, ctx->regs + VIDOSD_A(win)); |
| |
| last_x = win_data->offset_x + win_data->ovl_width; |
| if (last_x) |
| last_x--; |
| last_y = win_data->offset_y + win_data->ovl_height; |
| if (last_y) |
| last_y--; |
| |
| val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y) | |
| VIDOSDxB_BOTRIGHT_X_E(last_x) | VIDOSDxB_BOTRIGHT_Y_E(last_y); |
| |
| writel(val, ctx->regs + VIDOSD_B(win)); |
| |
| DRM_DEBUG_KMS("osd pos: tx = %d, ty = %d, bx = %d, by = %d\n", |
| win_data->offset_x, win_data->offset_y, last_x, last_y); |
| |
| /* hardware window 0 doesn't support alpha channel. */ |
| if (win != 0) { |
| /* OSD alpha */ |
| alpha = VIDISD14C_ALPHA1_R(0xf) | |
| VIDISD14C_ALPHA1_G(0xf) | |
| VIDISD14C_ALPHA1_B(0xf); |
| |
| writel(alpha, ctx->regs + VIDOSD_C(win)); |
| } |
| |
| /* OSD size */ |
| if (win != 3 && win != 4) { |
| u32 offset = VIDOSD_D(win); |
| if (win == 0) |
| offset = VIDOSD_C(win); |
| val = win_data->ovl_width * win_data->ovl_height; |
| writel(val, ctx->regs + offset); |
| |
| DRM_DEBUG_KMS("osd size = 0x%x\n", (unsigned int)val); |
| } |
| |
| fimd_win_set_pixfmt(ctx, win); |
| |
| /* hardware window 0 doesn't support color key. */ |
| if (win != 0) |
| fimd_win_set_colkey(ctx, win); |
| |
| /* wincon */ |
| val = readl(ctx->regs + WINCON(win)); |
| val |= WINCONx_ENWIN; |
| writel(val, ctx->regs + WINCON(win)); |
| |
| /* Enable DMA channel and unprotect windows */ |
| fimd_shadow_protect_win(ctx, win, false); |
| |
| if (ctx->driver_data->has_shadowcon) { |
| val = readl(ctx->regs + SHADOWCON); |
| val |= SHADOWCON_CHx_ENABLE(win); |
| writel(val, ctx->regs + SHADOWCON); |
| } |
| |
| win_data->enabled = true; |
| } |
| |
| static void fimd_win_disable(struct exynos_drm_manager *mgr, int zpos) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| struct fimd_win_data *win_data; |
| int win = zpos; |
| u32 val; |
| |
| if (win == DEFAULT_ZPOS) |
| win = ctx->default_win; |
| |
| if (win < 0 || win >= WINDOWS_NR) |
| return; |
| |
| win_data = &ctx->win_data[win]; |
| |
| if (ctx->suspended) { |
| /* do not resume this window*/ |
| win_data->resume = false; |
| return; |
| } |
| |
| /* protect windows */ |
| fimd_shadow_protect_win(ctx, win, true); |
| |
| /* wincon */ |
| val = readl(ctx->regs + WINCON(win)); |
| val &= ~WINCONx_ENWIN; |
| writel(val, ctx->regs + WINCON(win)); |
| |
| /* unprotect windows */ |
| if (ctx->driver_data->has_shadowcon) { |
| val = readl(ctx->regs + SHADOWCON); |
| val &= ~SHADOWCON_CHx_ENABLE(win); |
| writel(val, ctx->regs + SHADOWCON); |
| } |
| |
| fimd_shadow_protect_win(ctx, win, false); |
| |
| win_data->enabled = false; |
| } |
| |
| static void fimd_window_suspend(struct exynos_drm_manager *mgr) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| struct fimd_win_data *win_data; |
| int i; |
| |
| for (i = 0; i < WINDOWS_NR; i++) { |
| win_data = &ctx->win_data[i]; |
| win_data->resume = win_data->enabled; |
| if (win_data->enabled) |
| fimd_win_disable(mgr, i); |
| } |
| fimd_wait_for_vblank(mgr); |
| } |
| |
| static void fimd_window_resume(struct exynos_drm_manager *mgr) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| struct fimd_win_data *win_data; |
| int i; |
| |
| for (i = 0; i < WINDOWS_NR; i++) { |
| win_data = &ctx->win_data[i]; |
| win_data->enabled = win_data->resume; |
| win_data->resume = false; |
| } |
| } |
| |
| static void fimd_apply(struct exynos_drm_manager *mgr) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| struct fimd_win_data *win_data; |
| int i; |
| |
| for (i = 0; i < WINDOWS_NR; i++) { |
| win_data = &ctx->win_data[i]; |
| if (win_data->enabled) |
| fimd_win_commit(mgr, i); |
| else |
| fimd_win_disable(mgr, i); |
| } |
| |
| fimd_commit(mgr); |
| } |
| |
| static int fimd_poweron(struct exynos_drm_manager *mgr) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| int ret; |
| |
| if (!ctx->suspended) |
| return 0; |
| |
| ctx->suspended = false; |
| |
| pm_runtime_get_sync(ctx->dev); |
| |
| ret = clk_prepare_enable(ctx->bus_clk); |
| if (ret < 0) { |
| DRM_ERROR("Failed to prepare_enable the bus clk [%d]\n", ret); |
| goto bus_clk_err; |
| } |
| |
| ret = clk_prepare_enable(ctx->lcd_clk); |
| if (ret < 0) { |
| DRM_ERROR("Failed to prepare_enable the lcd clk [%d]\n", ret); |
| goto lcd_clk_err; |
| } |
| |
| /* if vblank was enabled status, enable it again. */ |
| if (test_and_clear_bit(0, &ctx->irq_flags)) { |
| ret = fimd_enable_vblank(mgr); |
| if (ret) { |
| DRM_ERROR("Failed to re-enable vblank [%d]\n", ret); |
| goto enable_vblank_err; |
| } |
| } |
| |
| fimd_window_resume(mgr); |
| |
| fimd_apply(mgr); |
| |
| return 0; |
| |
| enable_vblank_err: |
| clk_disable_unprepare(ctx->lcd_clk); |
| lcd_clk_err: |
| clk_disable_unprepare(ctx->bus_clk); |
| bus_clk_err: |
| ctx->suspended = true; |
| return ret; |
| } |
| |
| static int fimd_poweroff(struct exynos_drm_manager *mgr) |
| { |
| struct fimd_context *ctx = mgr->ctx; |
| |
| if (ctx->suspended) |
| return 0; |
| |
| /* |
| * We need to make sure that all windows are disabled before we |
| * suspend that connector. Otherwise we might try to scan from |
| * a destroyed buffer later. |
| */ |
| fimd_window_suspend(mgr); |
| |
| clk_disable_unprepare(ctx->lcd_clk); |
| clk_disable_unprepare(ctx->bus_clk); |
| |
| pm_runtime_put_sync(ctx->dev); |
| |
| ctx->suspended = true; |
| return 0; |
| } |
| |
| static void fimd_dpms(struct exynos_drm_manager *mgr, int mode) |
| { |
| DRM_DEBUG_KMS("%s, %d\n", __FILE__, mode); |
| |
| switch (mode) { |
| case DRM_MODE_DPMS_ON: |
| fimd_poweron(mgr); |
| break; |
| case DRM_MODE_DPMS_STANDBY: |
| case DRM_MODE_DPMS_SUSPEND: |
| case DRM_MODE_DPMS_OFF: |
| fimd_poweroff(mgr); |
| break; |
| default: |
| DRM_DEBUG_KMS("unspecified mode %d\n", mode); |
| break; |
| } |
| } |
| |
| static struct exynos_drm_manager_ops fimd_manager_ops = { |
| .dpms = fimd_dpms, |
| .mode_fixup = fimd_mode_fixup, |
| .mode_set = fimd_mode_set, |
| .commit = fimd_commit, |
| .enable_vblank = fimd_enable_vblank, |
| .disable_vblank = fimd_disable_vblank, |
| .wait_for_vblank = fimd_wait_for_vblank, |
| .win_mode_set = fimd_win_mode_set, |
| .win_commit = fimd_win_commit, |
| .win_disable = fimd_win_disable, |
| }; |
| |
| static struct exynos_drm_manager fimd_manager = { |
| .type = EXYNOS_DISPLAY_TYPE_LCD, |
| .ops = &fimd_manager_ops, |
| }; |
| |
| static irqreturn_t fimd_irq_handler(int irq, void *dev_id) |
| { |
| struct fimd_context *ctx = (struct fimd_context *)dev_id; |
| u32 val; |
| |
| val = readl(ctx->regs + VIDINTCON1); |
| |
| if (val & VIDINTCON1_INT_FRAME) |
| /* VSYNC interrupt */ |
| writel(VIDINTCON1_INT_FRAME, ctx->regs + VIDINTCON1); |
| |
| /* check the crtc is detached already from encoder */ |
| if (ctx->pipe < 0 || !ctx->drm_dev) |
| goto out; |
| |
| drm_handle_vblank(ctx->drm_dev, ctx->pipe); |
| exynos_drm_crtc_finish_pageflip(ctx->drm_dev, ctx->pipe); |
| |
| /* set wait vsync event to zero and wake up queue. */ |
| if (atomic_read(&ctx->wait_vsync_event)) { |
| atomic_set(&ctx->wait_vsync_event, 0); |
| wake_up(&ctx->wait_vsync_queue); |
| } |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static int fimd_bind(struct device *dev, struct device *master, void *data) |
| { |
| struct fimd_context *ctx = fimd_manager.ctx; |
| struct drm_device *drm_dev = data; |
| |
| fimd_mgr_initialize(&fimd_manager, drm_dev); |
| exynos_drm_crtc_create(&fimd_manager); |
| if (ctx->display) |
| exynos_drm_create_enc_conn(drm_dev, ctx->display); |
| |
| return 0; |
| |
| } |
| |
| static void fimd_unbind(struct device *dev, struct device *master, |
| void *data) |
| { |
| struct exynos_drm_manager *mgr = dev_get_drvdata(dev); |
| struct fimd_context *ctx = fimd_manager.ctx; |
| struct drm_crtc *crtc = mgr->crtc; |
| |
| fimd_dpms(mgr, DRM_MODE_DPMS_OFF); |
| |
| if (ctx->display) |
| exynos_dpi_remove(dev); |
| |
| fimd_mgr_remove(mgr); |
| |
| crtc->funcs->destroy(crtc); |
| } |
| |
| static const struct component_ops fimd_component_ops = { |
| .bind = fimd_bind, |
| .unbind = fimd_unbind, |
| }; |
| |
| static int fimd_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct fimd_context *ctx; |
| struct resource *res; |
| int ret = -EINVAL; |
| |
| ret = exynos_drm_component_add(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC, |
| fimd_manager.type); |
| if (ret) |
| return ret; |
| |
| if (!dev->of_node) { |
| ret = -ENODEV; |
| goto err_del_component; |
| } |
| |
| ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) { |
| ret = -ENOMEM; |
| goto err_del_component; |
| } |
| |
| ctx->dev = dev; |
| ctx->suspended = true; |
| |
| if (of_property_read_bool(dev->of_node, "samsung,invert-vden")) |
| ctx->vidcon1 |= VIDCON1_INV_VDEN; |
| if (of_property_read_bool(dev->of_node, "samsung,invert-vclk")) |
| ctx->vidcon1 |= VIDCON1_INV_VCLK; |
| |
| ctx->bus_clk = devm_clk_get(dev, "fimd"); |
| if (IS_ERR(ctx->bus_clk)) { |
| dev_err(dev, "failed to get bus clock\n"); |
| ret = PTR_ERR(ctx->bus_clk); |
| goto err_del_component; |
| } |
| |
| ctx->lcd_clk = devm_clk_get(dev, "sclk_fimd"); |
| if (IS_ERR(ctx->lcd_clk)) { |
| dev_err(dev, "failed to get lcd clock\n"); |
| ret = PTR_ERR(ctx->lcd_clk); |
| goto err_del_component; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| ctx->regs = devm_ioremap_resource(dev, res); |
| if (IS_ERR(ctx->regs)) { |
| ret = PTR_ERR(ctx->regs); |
| goto err_del_component; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "vsync"); |
| if (!res) { |
| dev_err(dev, "irq request failed.\n"); |
| ret = -ENXIO; |
| goto err_del_component; |
| } |
| |
| ret = devm_request_irq(dev, res->start, fimd_irq_handler, |
| 0, "drm_fimd", ctx); |
| if (ret) { |
| dev_err(dev, "irq request failed.\n"); |
| goto err_del_component; |
| } |
| |
| ctx->driver_data = drm_fimd_get_driver_data(pdev); |
| init_waitqueue_head(&ctx->wait_vsync_queue); |
| atomic_set(&ctx->wait_vsync_event, 0); |
| |
| platform_set_drvdata(pdev, &fimd_manager); |
| |
| fimd_manager.ctx = ctx; |
| |
| ctx->display = exynos_dpi_probe(dev); |
| if (IS_ERR(ctx->display)) |
| return PTR_ERR(ctx->display); |
| |
| pm_runtime_enable(&pdev->dev); |
| |
| ret = component_add(&pdev->dev, &fimd_component_ops); |
| if (ret) |
| goto err_disable_pm_runtime; |
| |
| return ret; |
| |
| err_disable_pm_runtime: |
| pm_runtime_disable(&pdev->dev); |
| |
| err_del_component: |
| exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC); |
| return ret; |
| } |
| |
| static int fimd_remove(struct platform_device *pdev) |
| { |
| pm_runtime_disable(&pdev->dev); |
| |
| component_del(&pdev->dev, &fimd_component_ops); |
| exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC); |
| |
| return 0; |
| } |
| |
| struct platform_driver fimd_driver = { |
| .probe = fimd_probe, |
| .remove = fimd_remove, |
| .driver = { |
| .name = "exynos4-fb", |
| .owner = THIS_MODULE, |
| .of_match_table = fimd_driver_dt_match, |
| }, |
| }; |