| /* |
| * linux/drivers/mtd/onenand/omap2.c |
| * |
| * OneNAND driver for OMAP2 / OMAP3 |
| * |
| * Copyright © 2005-2006 Nokia Corporation |
| * |
| * Author: Jarkko Lavinen <jarkko.lavinen@nokia.com> and Juha Yrjölä |
| * IRQ and DMA support written by Timo Teras |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; see the file COPYING. If not, write to the Free Software |
| * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/onenand.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <asm/mach/flash.h> |
| #include <linux/platform_data/mtd-onenand-omap2.h> |
| #include <asm/gpio.h> |
| |
| #include <linux/omap-dma.h> |
| |
| #define DRIVER_NAME "omap2-onenand" |
| |
| #define ONENAND_BUFRAM_SIZE (1024 * 5) |
| |
| struct omap2_onenand { |
| struct platform_device *pdev; |
| int gpmc_cs; |
| unsigned long phys_base; |
| unsigned int mem_size; |
| int gpio_irq; |
| struct mtd_info mtd; |
| struct onenand_chip onenand; |
| struct completion irq_done; |
| struct completion dma_done; |
| int dma_channel; |
| int freq; |
| int (*setup)(void __iomem *base, int *freq_ptr); |
| struct regulator *regulator; |
| u8 flags; |
| }; |
| |
| static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data) |
| { |
| struct omap2_onenand *c = data; |
| |
| complete(&c->dma_done); |
| } |
| |
| static irqreturn_t omap2_onenand_interrupt(int irq, void *dev_id) |
| { |
| struct omap2_onenand *c = dev_id; |
| |
| complete(&c->irq_done); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static inline unsigned short read_reg(struct omap2_onenand *c, int reg) |
| { |
| return readw(c->onenand.base + reg); |
| } |
| |
| static inline void write_reg(struct omap2_onenand *c, unsigned short value, |
| int reg) |
| { |
| writew(value, c->onenand.base + reg); |
| } |
| |
| static void wait_err(char *msg, int state, unsigned int ctrl, unsigned int intr) |
| { |
| printk(KERN_ERR "onenand_wait: %s! state %d ctrl 0x%04x intr 0x%04x\n", |
| msg, state, ctrl, intr); |
| } |
| |
| static void wait_warn(char *msg, int state, unsigned int ctrl, |
| unsigned int intr) |
| { |
| printk(KERN_WARNING "onenand_wait: %s! state %d ctrl 0x%04x " |
| "intr 0x%04x\n", msg, state, ctrl, intr); |
| } |
| |
| static int omap2_onenand_wait(struct mtd_info *mtd, int state) |
| { |
| struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); |
| struct onenand_chip *this = mtd->priv; |
| unsigned int intr = 0; |
| unsigned int ctrl, ctrl_mask; |
| unsigned long timeout; |
| u32 syscfg; |
| |
| if (state == FL_RESETING || state == FL_PREPARING_ERASE || |
| state == FL_VERIFYING_ERASE) { |
| int i = 21; |
| unsigned int intr_flags = ONENAND_INT_MASTER; |
| |
| switch (state) { |
| case FL_RESETING: |
| intr_flags |= ONENAND_INT_RESET; |
| break; |
| case FL_PREPARING_ERASE: |
| intr_flags |= ONENAND_INT_ERASE; |
| break; |
| case FL_VERIFYING_ERASE: |
| i = 101; |
| break; |
| } |
| |
| while (--i) { |
| udelay(1); |
| intr = read_reg(c, ONENAND_REG_INTERRUPT); |
| if (intr & ONENAND_INT_MASTER) |
| break; |
| } |
| ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); |
| if (ctrl & ONENAND_CTRL_ERROR) { |
| wait_err("controller error", state, ctrl, intr); |
| return -EIO; |
| } |
| if ((intr & intr_flags) == intr_flags) |
| return 0; |
| /* Continue in wait for interrupt branch */ |
| } |
| |
| if (state != FL_READING) { |
| int result; |
| |
| /* Turn interrupts on */ |
| syscfg = read_reg(c, ONENAND_REG_SYS_CFG1); |
| if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) { |
| syscfg |= ONENAND_SYS_CFG1_IOBE; |
| write_reg(c, syscfg, ONENAND_REG_SYS_CFG1); |
| if (c->flags & ONENAND_IN_OMAP34XX) |
| /* Add a delay to let GPIO settle */ |
| syscfg = read_reg(c, ONENAND_REG_SYS_CFG1); |
| } |
| |
| reinit_completion(&c->irq_done); |
| if (c->gpio_irq) { |
| result = gpio_get_value(c->gpio_irq); |
| if (result == -1) { |
| ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); |
| intr = read_reg(c, ONENAND_REG_INTERRUPT); |
| wait_err("gpio error", state, ctrl, intr); |
| return -EIO; |
| } |
| } else |
| result = 0; |
| if (result == 0) { |
| int retry_cnt = 0; |
| retry: |
| result = wait_for_completion_timeout(&c->irq_done, |
| msecs_to_jiffies(20)); |
| if (result == 0) { |
| /* Timeout after 20ms */ |
| ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); |
| if (ctrl & ONENAND_CTRL_ONGO && |
| !this->ongoing) { |
| /* |
| * The operation seems to be still going |
| * so give it some more time. |
| */ |
| retry_cnt += 1; |
| if (retry_cnt < 3) |
| goto retry; |
| intr = read_reg(c, |
| ONENAND_REG_INTERRUPT); |
| wait_err("timeout", state, ctrl, intr); |
| return -EIO; |
| } |
| intr = read_reg(c, ONENAND_REG_INTERRUPT); |
| if ((intr & ONENAND_INT_MASTER) == 0) |
| wait_warn("timeout", state, ctrl, intr); |
| } |
| } |
| } else { |
| int retry_cnt = 0; |
| |
| /* Turn interrupts off */ |
| syscfg = read_reg(c, ONENAND_REG_SYS_CFG1); |
| syscfg &= ~ONENAND_SYS_CFG1_IOBE; |
| write_reg(c, syscfg, ONENAND_REG_SYS_CFG1); |
| |
| timeout = jiffies + msecs_to_jiffies(20); |
| while (1) { |
| if (time_before(jiffies, timeout)) { |
| intr = read_reg(c, ONENAND_REG_INTERRUPT); |
| if (intr & ONENAND_INT_MASTER) |
| break; |
| } else { |
| /* Timeout after 20ms */ |
| ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); |
| if (ctrl & ONENAND_CTRL_ONGO) { |
| /* |
| * The operation seems to be still going |
| * so give it some more time. |
| */ |
| retry_cnt += 1; |
| if (retry_cnt < 3) { |
| timeout = jiffies + |
| msecs_to_jiffies(20); |
| continue; |
| } |
| } |
| break; |
| } |
| } |
| } |
| |
| intr = read_reg(c, ONENAND_REG_INTERRUPT); |
| ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); |
| |
| if (intr & ONENAND_INT_READ) { |
| int ecc = read_reg(c, ONENAND_REG_ECC_STATUS); |
| |
| if (ecc) { |
| unsigned int addr1, addr8; |
| |
| addr1 = read_reg(c, ONENAND_REG_START_ADDRESS1); |
| addr8 = read_reg(c, ONENAND_REG_START_ADDRESS8); |
| if (ecc & ONENAND_ECC_2BIT_ALL) { |
| printk(KERN_ERR "onenand_wait: ECC error = " |
| "0x%04x, addr1 %#x, addr8 %#x\n", |
| ecc, addr1, addr8); |
| mtd->ecc_stats.failed++; |
| return -EBADMSG; |
| } else if (ecc & ONENAND_ECC_1BIT_ALL) { |
| printk(KERN_NOTICE "onenand_wait: correctable " |
| "ECC error = 0x%04x, addr1 %#x, " |
| "addr8 %#x\n", ecc, addr1, addr8); |
| mtd->ecc_stats.corrected++; |
| } |
| } |
| } else if (state == FL_READING) { |
| wait_err("timeout", state, ctrl, intr); |
| return -EIO; |
| } |
| |
| if (ctrl & ONENAND_CTRL_ERROR) { |
| wait_err("controller error", state, ctrl, intr); |
| if (ctrl & ONENAND_CTRL_LOCK) |
| printk(KERN_ERR "onenand_wait: " |
| "Device is write protected!!!\n"); |
| return -EIO; |
| } |
| |
| ctrl_mask = 0xFE9F; |
| if (this->ongoing) |
| ctrl_mask &= ~0x8000; |
| |
| if (ctrl & ctrl_mask) |
| wait_warn("unexpected controller status", state, ctrl, intr); |
| |
| return 0; |
| } |
| |
| static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area) |
| { |
| struct onenand_chip *this = mtd->priv; |
| |
| if (ONENAND_CURRENT_BUFFERRAM(this)) { |
| if (area == ONENAND_DATARAM) |
| return this->writesize; |
| if (area == ONENAND_SPARERAM) |
| return mtd->oobsize; |
| } |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2) |
| |
| static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, |
| unsigned char *buffer, int offset, |
| size_t count) |
| { |
| struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); |
| struct onenand_chip *this = mtd->priv; |
| dma_addr_t dma_src, dma_dst; |
| int bram_offset; |
| unsigned long timeout; |
| void *buf = (void *)buffer; |
| size_t xtra; |
| volatile unsigned *done; |
| |
| bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; |
| if (bram_offset & 3 || (size_t)buf & 3 || count < 384) |
| goto out_copy; |
| |
| /* panic_write() may be in an interrupt context */ |
| if (in_interrupt() || oops_in_progress) |
| goto out_copy; |
| |
| if (buf >= high_memory) { |
| struct page *p1; |
| |
| if (((size_t)buf & PAGE_MASK) != |
| ((size_t)(buf + count - 1) & PAGE_MASK)) |
| goto out_copy; |
| p1 = vmalloc_to_page(buf); |
| if (!p1) |
| goto out_copy; |
| buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK); |
| } |
| |
| xtra = count & 3; |
| if (xtra) { |
| count -= xtra; |
| memcpy(buf + count, this->base + bram_offset + count, xtra); |
| } |
| |
| dma_src = c->phys_base + bram_offset; |
| dma_dst = dma_map_single(&c->pdev->dev, buf, count, DMA_FROM_DEVICE); |
| if (dma_mapping_error(&c->pdev->dev, dma_dst)) { |
| dev_err(&c->pdev->dev, |
| "Couldn't DMA map a %d byte buffer\n", |
| count); |
| goto out_copy; |
| } |
| |
| omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32, |
| count >> 2, 1, 0, 0, 0); |
| omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, |
| dma_src, 0, 0); |
| omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, |
| dma_dst, 0, 0); |
| |
| reinit_completion(&c->dma_done); |
| omap_start_dma(c->dma_channel); |
| |
| timeout = jiffies + msecs_to_jiffies(20); |
| done = &c->dma_done.done; |
| while (time_before(jiffies, timeout)) |
| if (*done) |
| break; |
| |
| dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE); |
| |
| if (!*done) { |
| dev_err(&c->pdev->dev, "timeout waiting for DMA\n"); |
| goto out_copy; |
| } |
| |
| return 0; |
| |
| out_copy: |
| memcpy(buf, this->base + bram_offset, count); |
| return 0; |
| } |
| |
| static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, |
| const unsigned char *buffer, |
| int offset, size_t count) |
| { |
| struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); |
| struct onenand_chip *this = mtd->priv; |
| dma_addr_t dma_src, dma_dst; |
| int bram_offset; |
| unsigned long timeout; |
| void *buf = (void *)buffer; |
| volatile unsigned *done; |
| |
| bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; |
| if (bram_offset & 3 || (size_t)buf & 3 || count < 384) |
| goto out_copy; |
| |
| /* panic_write() may be in an interrupt context */ |
| if (in_interrupt() || oops_in_progress) |
| goto out_copy; |
| |
| if (buf >= high_memory) { |
| struct page *p1; |
| |
| if (((size_t)buf & PAGE_MASK) != |
| ((size_t)(buf + count - 1) & PAGE_MASK)) |
| goto out_copy; |
| p1 = vmalloc_to_page(buf); |
| if (!p1) |
| goto out_copy; |
| buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK); |
| } |
| |
| dma_src = dma_map_single(&c->pdev->dev, buf, count, DMA_TO_DEVICE); |
| dma_dst = c->phys_base + bram_offset; |
| if (dma_mapping_error(&c->pdev->dev, dma_src)) { |
| dev_err(&c->pdev->dev, |
| "Couldn't DMA map a %d byte buffer\n", |
| count); |
| return -1; |
| } |
| |
| omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32, |
| count >> 2, 1, 0, 0, 0); |
| omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, |
| dma_src, 0, 0); |
| omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, |
| dma_dst, 0, 0); |
| |
| reinit_completion(&c->dma_done); |
| omap_start_dma(c->dma_channel); |
| |
| timeout = jiffies + msecs_to_jiffies(20); |
| done = &c->dma_done.done; |
| while (time_before(jiffies, timeout)) |
| if (*done) |
| break; |
| |
| dma_unmap_single(&c->pdev->dev, dma_src, count, DMA_TO_DEVICE); |
| |
| if (!*done) { |
| dev_err(&c->pdev->dev, "timeout waiting for DMA\n"); |
| goto out_copy; |
| } |
| |
| return 0; |
| |
| out_copy: |
| memcpy(this->base + bram_offset, buf, count); |
| return 0; |
| } |
| |
| #else |
| |
| static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area, |
| unsigned char *buffer, int offset, |
| size_t count) |
| { |
| return -ENOSYS; |
| } |
| |
| static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area, |
| const unsigned char *buffer, |
| int offset, size_t count) |
| { |
| return -ENOSYS; |
| } |
| |
| #endif |
| |
| #if defined(CONFIG_ARCH_OMAP2) || defined(MULTI_OMAP2) |
| |
| static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, |
| unsigned char *buffer, int offset, |
| size_t count) |
| { |
| struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); |
| struct onenand_chip *this = mtd->priv; |
| dma_addr_t dma_src, dma_dst; |
| int bram_offset; |
| |
| bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; |
| /* DMA is not used. Revisit PM requirements before enabling it. */ |
| if (1 || (c->dma_channel < 0) || |
| ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) || |
| (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) { |
| memcpy(buffer, (__force void *)(this->base + bram_offset), |
| count); |
| return 0; |
| } |
| |
| dma_src = c->phys_base + bram_offset; |
| dma_dst = dma_map_single(&c->pdev->dev, buffer, count, |
| DMA_FROM_DEVICE); |
| if (dma_mapping_error(&c->pdev->dev, dma_dst)) { |
| dev_err(&c->pdev->dev, |
| "Couldn't DMA map a %d byte buffer\n", |
| count); |
| return -1; |
| } |
| |
| omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32, |
| count / 4, 1, 0, 0, 0); |
| omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, |
| dma_src, 0, 0); |
| omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, |
| dma_dst, 0, 0); |
| |
| reinit_completion(&c->dma_done); |
| omap_start_dma(c->dma_channel); |
| wait_for_completion(&c->dma_done); |
| |
| dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE); |
| |
| return 0; |
| } |
| |
| static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, |
| const unsigned char *buffer, |
| int offset, size_t count) |
| { |
| struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); |
| struct onenand_chip *this = mtd->priv; |
| dma_addr_t dma_src, dma_dst; |
| int bram_offset; |
| |
| bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset; |
| /* DMA is not used. Revisit PM requirements before enabling it. */ |
| if (1 || (c->dma_channel < 0) || |
| ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) || |
| (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) { |
| memcpy((__force void *)(this->base + bram_offset), buffer, |
| count); |
| return 0; |
| } |
| |
| dma_src = dma_map_single(&c->pdev->dev, (void *) buffer, count, |
| DMA_TO_DEVICE); |
| dma_dst = c->phys_base + bram_offset; |
| if (dma_mapping_error(&c->pdev->dev, dma_src)) { |
| dev_err(&c->pdev->dev, |
| "Couldn't DMA map a %d byte buffer\n", |
| count); |
| return -1; |
| } |
| |
| omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S16, |
| count / 2, 1, 0, 0, 0); |
| omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, |
| dma_src, 0, 0); |
| omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC, |
| dma_dst, 0, 0); |
| |
| reinit_completion(&c->dma_done); |
| omap_start_dma(c->dma_channel); |
| wait_for_completion(&c->dma_done); |
| |
| dma_unmap_single(&c->pdev->dev, dma_src, count, DMA_TO_DEVICE); |
| |
| return 0; |
| } |
| |
| #else |
| |
| static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area, |
| unsigned char *buffer, int offset, |
| size_t count) |
| { |
| return -ENOSYS; |
| } |
| |
| static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area, |
| const unsigned char *buffer, |
| int offset, size_t count) |
| { |
| return -ENOSYS; |
| } |
| |
| #endif |
| |
| static struct platform_driver omap2_onenand_driver; |
| |
| static void omap2_onenand_shutdown(struct platform_device *pdev) |
| { |
| struct omap2_onenand *c = dev_get_drvdata(&pdev->dev); |
| |
| /* With certain content in the buffer RAM, the OMAP boot ROM code |
| * can recognize the flash chip incorrectly. Zero it out before |
| * soft reset. |
| */ |
| memset((__force void *)c->onenand.base, 0, ONENAND_BUFRAM_SIZE); |
| } |
| |
| static int omap2_onenand_enable(struct mtd_info *mtd) |
| { |
| int ret; |
| struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); |
| |
| ret = regulator_enable(c->regulator); |
| if (ret != 0) |
| dev_err(&c->pdev->dev, "can't enable regulator\n"); |
| |
| return ret; |
| } |
| |
| static int omap2_onenand_disable(struct mtd_info *mtd) |
| { |
| int ret; |
| struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd); |
| |
| ret = regulator_disable(c->regulator); |
| if (ret != 0) |
| dev_err(&c->pdev->dev, "can't disable regulator\n"); |
| |
| return ret; |
| } |
| |
| static int omap2_onenand_probe(struct platform_device *pdev) |
| { |
| struct omap_onenand_platform_data *pdata; |
| struct omap2_onenand *c; |
| struct onenand_chip *this; |
| int r; |
| struct resource *res; |
| struct mtd_part_parser_data ppdata = {}; |
| |
| pdata = dev_get_platdata(&pdev->dev); |
| if (pdata == NULL) { |
| dev_err(&pdev->dev, "platform data missing\n"); |
| return -ENODEV; |
| } |
| |
| c = kzalloc(sizeof(struct omap2_onenand), GFP_KERNEL); |
| if (!c) |
| return -ENOMEM; |
| |
| init_completion(&c->irq_done); |
| init_completion(&c->dma_done); |
| c->flags = pdata->flags; |
| c->gpmc_cs = pdata->cs; |
| c->gpio_irq = pdata->gpio_irq; |
| c->dma_channel = pdata->dma_channel; |
| if (c->dma_channel < 0) { |
| /* if -1, don't use DMA */ |
| c->gpio_irq = 0; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (res == NULL) { |
| r = -EINVAL; |
| dev_err(&pdev->dev, "error getting memory resource\n"); |
| goto err_kfree; |
| } |
| |
| c->phys_base = res->start; |
| c->mem_size = resource_size(res); |
| |
| if (request_mem_region(c->phys_base, c->mem_size, |
| pdev->dev.driver->name) == NULL) { |
| dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, size: 0x%x\n", |
| c->phys_base, c->mem_size); |
| r = -EBUSY; |
| goto err_kfree; |
| } |
| c->onenand.base = ioremap(c->phys_base, c->mem_size); |
| if (c->onenand.base == NULL) { |
| r = -ENOMEM; |
| goto err_release_mem_region; |
| } |
| |
| if (pdata->onenand_setup != NULL) { |
| r = pdata->onenand_setup(c->onenand.base, &c->freq); |
| if (r < 0) { |
| dev_err(&pdev->dev, "Onenand platform setup failed: " |
| "%d\n", r); |
| goto err_iounmap; |
| } |
| c->setup = pdata->onenand_setup; |
| } |
| |
| if (c->gpio_irq) { |
| if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) { |
| dev_err(&pdev->dev, "Failed to request GPIO%d for " |
| "OneNAND\n", c->gpio_irq); |
| goto err_iounmap; |
| } |
| gpio_direction_input(c->gpio_irq); |
| |
| if ((r = request_irq(gpio_to_irq(c->gpio_irq), |
| omap2_onenand_interrupt, IRQF_TRIGGER_RISING, |
| pdev->dev.driver->name, c)) < 0) |
| goto err_release_gpio; |
| } |
| |
| if (c->dma_channel >= 0) { |
| r = omap_request_dma(0, pdev->dev.driver->name, |
| omap2_onenand_dma_cb, (void *) c, |
| &c->dma_channel); |
| if (r == 0) { |
| omap_set_dma_write_mode(c->dma_channel, |
| OMAP_DMA_WRITE_NON_POSTED); |
| omap_set_dma_src_data_pack(c->dma_channel, 1); |
| omap_set_dma_src_burst_mode(c->dma_channel, |
| OMAP_DMA_DATA_BURST_8); |
| omap_set_dma_dest_data_pack(c->dma_channel, 1); |
| omap_set_dma_dest_burst_mode(c->dma_channel, |
| OMAP_DMA_DATA_BURST_8); |
| } else { |
| dev_info(&pdev->dev, |
| "failed to allocate DMA for OneNAND, " |
| "using PIO instead\n"); |
| c->dma_channel = -1; |
| } |
| } |
| |
| dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual " |
| "base %p, freq %d MHz\n", c->gpmc_cs, c->phys_base, |
| c->onenand.base, c->freq); |
| |
| c->pdev = pdev; |
| c->mtd.name = dev_name(&pdev->dev); |
| c->mtd.priv = &c->onenand; |
| c->mtd.owner = THIS_MODULE; |
| |
| c->mtd.dev.parent = &pdev->dev; |
| |
| this = &c->onenand; |
| if (c->dma_channel >= 0) { |
| this->wait = omap2_onenand_wait; |
| if (c->flags & ONENAND_IN_OMAP34XX) { |
| this->read_bufferram = omap3_onenand_read_bufferram; |
| this->write_bufferram = omap3_onenand_write_bufferram; |
| } else { |
| this->read_bufferram = omap2_onenand_read_bufferram; |
| this->write_bufferram = omap2_onenand_write_bufferram; |
| } |
| } |
| |
| if (pdata->regulator_can_sleep) { |
| c->regulator = regulator_get(&pdev->dev, "vonenand"); |
| if (IS_ERR(c->regulator)) { |
| dev_err(&pdev->dev, "Failed to get regulator\n"); |
| r = PTR_ERR(c->regulator); |
| goto err_release_dma; |
| } |
| c->onenand.enable = omap2_onenand_enable; |
| c->onenand.disable = omap2_onenand_disable; |
| } |
| |
| if (pdata->skip_initial_unlocking) |
| this->options |= ONENAND_SKIP_INITIAL_UNLOCKING; |
| |
| if ((r = onenand_scan(&c->mtd, 1)) < 0) |
| goto err_release_regulator; |
| |
| ppdata.of_node = pdata->of_node; |
| r = mtd_device_parse_register(&c->mtd, NULL, &ppdata, |
| pdata ? pdata->parts : NULL, |
| pdata ? pdata->nr_parts : 0); |
| if (r) |
| goto err_release_onenand; |
| |
| platform_set_drvdata(pdev, c); |
| |
| return 0; |
| |
| err_release_onenand: |
| onenand_release(&c->mtd); |
| err_release_regulator: |
| regulator_put(c->regulator); |
| err_release_dma: |
| if (c->dma_channel != -1) |
| omap_free_dma(c->dma_channel); |
| if (c->gpio_irq) |
| free_irq(gpio_to_irq(c->gpio_irq), c); |
| err_release_gpio: |
| if (c->gpio_irq) |
| gpio_free(c->gpio_irq); |
| err_iounmap: |
| iounmap(c->onenand.base); |
| err_release_mem_region: |
| release_mem_region(c->phys_base, c->mem_size); |
| err_kfree: |
| kfree(c); |
| |
| return r; |
| } |
| |
| static int omap2_onenand_remove(struct platform_device *pdev) |
| { |
| struct omap2_onenand *c = dev_get_drvdata(&pdev->dev); |
| |
| onenand_release(&c->mtd); |
| regulator_put(c->regulator); |
| if (c->dma_channel != -1) |
| omap_free_dma(c->dma_channel); |
| omap2_onenand_shutdown(pdev); |
| if (c->gpio_irq) { |
| free_irq(gpio_to_irq(c->gpio_irq), c); |
| gpio_free(c->gpio_irq); |
| } |
| iounmap(c->onenand.base); |
| release_mem_region(c->phys_base, c->mem_size); |
| kfree(c); |
| |
| return 0; |
| } |
| |
| static struct platform_driver omap2_onenand_driver = { |
| .probe = omap2_onenand_probe, |
| .remove = omap2_onenand_remove, |
| .shutdown = omap2_onenand_shutdown, |
| .driver = { |
| .name = DRIVER_NAME, |
| }, |
| }; |
| |
| module_platform_driver(omap2_onenand_driver); |
| |
| MODULE_ALIAS("platform:" DRIVER_NAME); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen@nokia.com>"); |
| MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP2 / OMAP3"); |