| /* |
| * Copyright (c) 2014-2019, The Linux Foundation. All rights reserved. |
| * Copyright (C) 2013 Red Hat |
| * Author: Rob Clark <robdclark@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__ |
| #include <linux/kthread.h> |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| #include <linux/sde_rsc.h> |
| |
| #include "msm_drv.h" |
| #include "sde_kms.h" |
| #include "drm_crtc.h" |
| #include "drm_crtc_helper.h" |
| |
| #include "sde_hwio.h" |
| #include "sde_hw_catalog.h" |
| #include "sde_hw_intf.h" |
| #include "sde_hw_ctl.h" |
| #include "sde_formats.h" |
| #include "sde_encoder_phys.h" |
| #include "sde_power_handle.h" |
| #include "sde_hw_dsc.h" |
| #include "sde_crtc.h" |
| #include "sde_trace.h" |
| #include "sde_core_irq.h" |
| |
| #define SDE_DEBUG_ENC(e, fmt, ...) SDE_DEBUG("enc%d " fmt,\ |
| (e) ? (e)->base.base.id : -1, ##__VA_ARGS__) |
| |
| #define SDE_ERROR_ENC(e, fmt, ...) SDE_ERROR("enc%d " fmt,\ |
| (e) ? (e)->base.base.id : -1, ##__VA_ARGS__) |
| |
| #define SDE_DEBUG_PHYS(p, fmt, ...) SDE_DEBUG("enc%d intf%d pp%d " fmt,\ |
| (p) ? (p)->parent->base.id : -1, \ |
| (p) ? (p)->intf_idx - INTF_0 : -1, \ |
| (p) ? ((p)->hw_pp ? (p)->hw_pp->idx - PINGPONG_0 : -1) : -1, \ |
| ##__VA_ARGS__) |
| |
| #define SDE_ERROR_PHYS(p, fmt, ...) SDE_ERROR("enc%d intf%d pp%d " fmt,\ |
| (p) ? (p)->parent->base.id : -1, \ |
| (p) ? (p)->intf_idx - INTF_0 : -1, \ |
| (p) ? ((p)->hw_pp ? (p)->hw_pp->idx - PINGPONG_0 : -1) : -1, \ |
| ##__VA_ARGS__) |
| |
| /* |
| * Two to anticipate panels that can do cmd/vid dynamic switching |
| * plan is to create all possible physical encoder types, and switch between |
| * them at runtime |
| */ |
| #define NUM_PHYS_ENCODER_TYPES 2 |
| |
| #define MAX_PHYS_ENCODERS_PER_VIRTUAL \ |
| (MAX_H_TILES_PER_DISPLAY * NUM_PHYS_ENCODER_TYPES) |
| |
| #define MAX_CHANNELS_PER_ENC 2 |
| |
| #define MISR_BUFF_SIZE 256 |
| |
| #define IDLE_SHORT_TIMEOUT 1 |
| |
| #define FAULT_TOLERENCE_DELTA_IN_MS 2 |
| |
| #define FAULT_TOLERENCE_WAIT_IN_MS 5 |
| |
| /* Maximum number of VSYNC wait attempts for RSC state transition */ |
| #define MAX_RSC_WAIT 5 |
| |
| #define TOPOLOGY_DUALPIPE_MERGE_MODE(x) \ |
| (((x) == SDE_RM_TOPOLOGY_DUALPIPE_DSCMERGE) || \ |
| ((x) == SDE_RM_TOPOLOGY_DUALPIPE_3DMERGE) || \ |
| ((x) == SDE_RM_TOPOLOGY_DUALPIPE_3DMERGE_DSC)) |
| |
| /** |
| * enum sde_enc_rc_events - events for resource control state machine |
| * @SDE_ENC_RC_EVENT_KICKOFF: |
| * This event happens at NORMAL priority. |
| * Event that signals the start of the transfer. When this event is |
| * received, enable MDP/DSI core clocks and request RSC with CMD state. |
| * Regardless of the previous state, the resource should be in ON state |
| * at the end of this event. |
| * @SDE_ENC_RC_EVENT_FRAME_DONE: |
| * This event happens at INTERRUPT level. |
| * Event signals the end of the data transfer after the PP FRAME_DONE |
| * event. At the end of this event, a delayed work is scheduled to go to |
| * IDLE_PC state after IDLE_POWERCOLLAPSE_DURATION time. |
| * @SDE_ENC_RC_EVENT_PRE_STOP: |
| * This event happens at NORMAL priority. |
| * This event, when received during the ON state, set RSC to IDLE, and |
| * and leave the RC STATE in the PRE_OFF state. |
| * It should be followed by the STOP event as part of encoder disable. |
| * If received during IDLE or OFF states, it will do nothing. |
| * @SDE_ENC_RC_EVENT_STOP: |
| * This event happens at NORMAL priority. |
| * When this event is received, disable all the MDP/DSI core clocks, and |
| * disable IRQs. It should be called from the PRE_OFF or IDLE states. |
| * IDLE is expected when IDLE_PC has run, and PRE_OFF did nothing. |
| * PRE_OFF is expected when PRE_STOP was executed during the ON state. |
| * Resource state should be in OFF at the end of the event. |
| * @SDE_ENC_RC_EVENT_PRE_MODESET: |
| * This event happens at NORMAL priority from a work item. |
| * Event signals that there is a seamless mode switch is in prgoress. A |
| * client needs to turn of only irq - leave clocks ON to reduce the mode |
| * switch latency. |
| * @SDE_ENC_RC_EVENT_POST_MODESET: |
| * This event happens at NORMAL priority from a work item. |
| * Event signals that seamless mode switch is complete and resources are |
| * acquired. Clients wants to turn on the irq again and update the rsc |
| * with new vtotal. |
| * @SDE_ENC_RC_EVENT_ENTER_IDLE: |
| * This event happens at NORMAL priority from a work item. |
| * Event signals that there were no frame updates for |
| * IDLE_POWERCOLLAPSE_DURATION time. This would disable MDP/DSI core clocks |
| * and request RSC with IDLE state and change the resource state to IDLE. |
| * @SDE_ENC_RC_EVENT_EARLY_WAKEUP: |
| * This event is triggered from the input event thread when touch event is |
| * received from the input device. On receiving this event, |
| * - If the device is in SDE_ENC_RC_STATE_IDLE state, it turns ON the |
| clocks and enable RSC. |
| * - If the device is in SDE_ENC_RC_STATE_ON state, it resets the delayed |
| * off work since a new commit is imminent. |
| */ |
| enum sde_enc_rc_events { |
| SDE_ENC_RC_EVENT_KICKOFF = 1, |
| SDE_ENC_RC_EVENT_FRAME_DONE, |
| SDE_ENC_RC_EVENT_PRE_STOP, |
| SDE_ENC_RC_EVENT_STOP, |
| SDE_ENC_RC_EVENT_PRE_MODESET, |
| SDE_ENC_RC_EVENT_POST_MODESET, |
| SDE_ENC_RC_EVENT_ENTER_IDLE, |
| SDE_ENC_RC_EVENT_EARLY_WAKEUP, |
| }; |
| |
| /* |
| * enum sde_enc_rc_states - states that the resource control maintains |
| * @SDE_ENC_RC_STATE_OFF: Resource is in OFF state |
| * @SDE_ENC_RC_STATE_PRE_OFF: Resource is transitioning to OFF state |
| * @SDE_ENC_RC_STATE_ON: Resource is in ON state |
| * @SDE_ENC_RC_STATE_MODESET: Resource is in modeset state |
| * @SDE_ENC_RC_STATE_IDLE: Resource is in IDLE state |
| */ |
| enum sde_enc_rc_states { |
| SDE_ENC_RC_STATE_OFF, |
| SDE_ENC_RC_STATE_PRE_OFF, |
| SDE_ENC_RC_STATE_ON, |
| SDE_ENC_RC_STATE_MODESET, |
| SDE_ENC_RC_STATE_IDLE |
| }; |
| |
| /** |
| * struct sde_encoder_virt - virtual encoder. Container of one or more physical |
| * encoders. Virtual encoder manages one "logical" display. Physical |
| * encoders manage one intf block, tied to a specific panel/sub-panel. |
| * Virtual encoder defers as much as possible to the physical encoders. |
| * Virtual encoder registers itself with the DRM Framework as the encoder. |
| * @base: drm_encoder base class for registration with DRM |
| * @enc_spin_lock: Virtual-Encoder-Wide Spin Lock for IRQ purposes |
| * @bus_scaling_client: Client handle to the bus scaling interface |
| * @num_phys_encs: Actual number of physical encoders contained. |
| * @phys_encs: Container of physical encoders managed. |
| * @cur_master: Pointer to the current master in this mode. Optimization |
| * Only valid after enable. Cleared as disable. |
| * @hw_pp Handle to the pingpong blocks used for the display. No. |
| * pingpong blocks can be different than num_phys_encs. |
| * @hw_dsc: Array of DSC block handles used for the display. |
| * @intfs_swapped Whether or not the phys_enc interfaces have been swapped |
| * for partial update right-only cases, such as pingpong |
| * split where virtual pingpong does not generate IRQs |
| * @crtc_vblank_cb: Callback into the upper layer / CRTC for |
| * notification of the VBLANK |
| * @crtc_vblank_cb_data: Data from upper layer for VBLANK notification |
| * @crtc_kickoff_cb: Callback into CRTC that will flush & start |
| * all CTL paths |
| * @crtc_kickoff_cb_data: Opaque user data given to crtc_kickoff_cb |
| * @debugfs_root: Debug file system root file node |
| * @enc_lock: Lock around physical encoder create/destroy and |
| access. |
| * @frame_busy_mask: Bitmask tracking which phys_enc we are still |
| * busy processing current command. |
| * Bit0 = phys_encs[0] etc. |
| * @crtc_frame_event_cb: callback handler for frame event |
| * @crtc_frame_event_cb_data: callback handler private data |
| * @vsync_event_timer: vsync timer |
| * @rsc_client: rsc client pointer |
| * @rsc_state_init: boolean to indicate rsc config init |
| * @disp_info: local copy of msm_display_info struct |
| * @misr_enable: misr enable/disable status |
| * @misr_frame_count: misr frame count before start capturing the data |
| * @idle_pc_enabled: indicate if idle power collapse is enabled |
| * currently. This can be controlled by user-mode |
| * @rc_lock: resource control mutex lock to protect |
| * virt encoder over various state changes |
| * @rc_state: resource controller state |
| * @delayed_off_work: delayed worker to schedule disabling of |
| * clks and resources after IDLE_TIMEOUT time. |
| * @vsync_event_work: worker to handle vsync event for autorefresh |
| * @input_event_work: worker to handle input device touch events |
| * @esd_trigger_work: worker to handle esd trigger events |
| * @input_handler: handler for input device events |
| * @topology: topology of the display |
| * @vblank_enabled: boolean to track userspace vblank vote |
| * @rsc_config: rsc configuration for display vtotal, fps, etc. |
| * @cur_conn_roi: current connector roi |
| * @prv_conn_roi: previous connector roi to optimize if unchanged |
| * @crtc pointer to drm_crtc |
| */ |
| struct sde_encoder_virt { |
| struct drm_encoder base; |
| spinlock_t enc_spinlock; |
| struct mutex vblank_ctl_lock; |
| uint32_t bus_scaling_client; |
| |
| uint32_t display_num_of_h_tiles; |
| |
| unsigned int num_phys_encs; |
| struct sde_encoder_phys *phys_encs[MAX_PHYS_ENCODERS_PER_VIRTUAL]; |
| struct sde_encoder_phys *cur_master; |
| struct sde_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; |
| struct sde_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; |
| |
| bool intfs_swapped; |
| |
| void (*crtc_vblank_cb)(void *); |
| void *crtc_vblank_cb_data; |
| |
| struct dentry *debugfs_root; |
| struct mutex enc_lock; |
| DECLARE_BITMAP(frame_busy_mask, MAX_PHYS_ENCODERS_PER_VIRTUAL); |
| void (*crtc_frame_event_cb)(void *, u32 event); |
| struct sde_crtc_frame_event_cb_data crtc_frame_event_cb_data; |
| |
| struct timer_list vsync_event_timer; |
| |
| struct sde_rsc_client *rsc_client; |
| bool rsc_state_init; |
| struct msm_display_info disp_info; |
| bool misr_enable; |
| u32 misr_frame_count; |
| |
| bool idle_pc_enabled; |
| struct mutex rc_lock; |
| enum sde_enc_rc_states rc_state; |
| struct kthread_delayed_work delayed_off_work; |
| struct kthread_work vsync_event_work; |
| struct kthread_work input_event_work; |
| struct kthread_work esd_trigger_work; |
| struct input_handler *input_handler; |
| bool input_handler_registered; |
| struct msm_display_topology topology; |
| bool vblank_enabled; |
| |
| struct sde_rsc_cmd_config rsc_config; |
| struct sde_rect cur_conn_roi; |
| struct sde_rect prv_conn_roi; |
| struct drm_crtc *crtc; |
| |
| bool elevated_ahb_vote; |
| }; |
| |
| #define to_sde_encoder_virt(x) container_of(x, struct sde_encoder_virt, base) |
| |
| static void _sde_encoder_pm_qos_add_request(struct drm_encoder *drm_enc) |
| { |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| struct pm_qos_request *req; |
| u32 cpu_mask; |
| u32 cpu_dma_latency; |
| int cpu; |
| |
| if (!drm_enc->dev || !drm_enc->dev->dev_private) { |
| SDE_ERROR("drm device invalid\n"); |
| return; |
| } |
| |
| priv = drm_enc->dev->dev_private; |
| if (!priv->kms) { |
| SDE_ERROR("invalid kms\n"); |
| return; |
| } |
| |
| sde_kms = to_sde_kms(priv->kms); |
| if (!sde_kms || !sde_kms->catalog) |
| return; |
| |
| cpu_mask = sde_kms->catalog->perf.cpu_mask; |
| cpu_dma_latency = sde_kms->catalog->perf.cpu_dma_latency; |
| if (!cpu_mask) |
| return; |
| |
| req = &sde_kms->pm_qos_cpu_req; |
| req->type = PM_QOS_REQ_AFFINE_CORES; |
| cpumask_empty(&req->cpus_affine); |
| for_each_possible_cpu(cpu) { |
| if ((1 << cpu) & cpu_mask) |
| cpumask_set_cpu(cpu, &req->cpus_affine); |
| } |
| pm_qos_add_request(req, PM_QOS_CPU_DMA_LATENCY, cpu_dma_latency); |
| |
| SDE_EVT32_VERBOSE(DRMID(drm_enc), cpu_mask, cpu_dma_latency); |
| } |
| |
| static void _sde_encoder_pm_qos_remove_request(struct drm_encoder *drm_enc) |
| { |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| |
| if (!drm_enc->dev || !drm_enc->dev->dev_private) { |
| SDE_ERROR("drm device invalid\n"); |
| return; |
| } |
| |
| priv = drm_enc->dev->dev_private; |
| if (!priv->kms) { |
| SDE_ERROR("invalid kms\n"); |
| return; |
| } |
| |
| sde_kms = to_sde_kms(priv->kms); |
| if (!sde_kms || !sde_kms->catalog || !sde_kms->catalog->perf.cpu_mask) |
| return; |
| |
| pm_qos_remove_request(&sde_kms->pm_qos_cpu_req); |
| } |
| |
| static struct drm_connector_state *_sde_encoder_get_conn_state( |
| struct drm_encoder *drm_enc) |
| { |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| struct list_head *connector_list; |
| struct drm_connector *conn_iter; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid argument\n"); |
| return NULL; |
| } |
| |
| priv = drm_enc->dev->dev_private; |
| sde_kms = to_sde_kms(priv->kms); |
| connector_list = &sde_kms->dev->mode_config.connector_list; |
| |
| list_for_each_entry(conn_iter, connector_list, head) |
| if (conn_iter->encoder == drm_enc) |
| return conn_iter->state; |
| |
| return NULL; |
| } |
| |
| static int _sde_encoder_get_mode_info(struct drm_encoder *drm_enc, |
| struct msm_mode_info *mode_info) |
| { |
| struct drm_connector_state *conn_state; |
| |
| if (!drm_enc || !mode_info) { |
| SDE_ERROR("invalid arguments\n"); |
| return -EINVAL; |
| } |
| |
| conn_state = _sde_encoder_get_conn_state(drm_enc); |
| if (!conn_state) { |
| SDE_ERROR("invalid connector state for the encoder: %d\n", |
| drm_enc->base.id); |
| return -EINVAL; |
| } |
| |
| return sde_connector_get_mode_info(conn_state, mode_info); |
| } |
| |
| static bool _sde_encoder_is_dsc_enabled(struct drm_encoder *drm_enc) |
| { |
| struct msm_compression_info *comp_info; |
| struct msm_mode_info mode_info; |
| int rc = 0; |
| |
| if (!drm_enc) |
| return false; |
| |
| rc = _sde_encoder_get_mode_info(drm_enc, &mode_info); |
| if (rc) { |
| SDE_ERROR("failed to get mode info, enc: %d\n", |
| drm_enc->base.id); |
| return false; |
| } |
| |
| comp_info = &mode_info.comp_info; |
| |
| return (comp_info->comp_type == MSM_DISPLAY_COMPRESSION_DSC); |
| } |
| |
| bool sde_encoder_is_dsc_merge(struct drm_encoder *drm_enc) |
| { |
| enum sde_rm_topology_name topology; |
| struct sde_encoder_virt *sde_enc; |
| struct drm_connector *drm_conn; |
| |
| if (!drm_enc) |
| return false; |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| if (!sde_enc->cur_master) |
| return false; |
| |
| drm_conn = sde_enc->cur_master->connector; |
| if (!drm_conn) |
| return false; |
| |
| topology = sde_connector_get_topology_name(drm_conn); |
| if (topology == SDE_RM_TOPOLOGY_DUALPIPE_DSCMERGE) |
| return true; |
| |
| return false; |
| } |
| |
| int sde_encoder_in_clone_mode(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc = to_sde_encoder_virt(drm_enc); |
| |
| return sde_enc && sde_enc->cur_master && |
| sde_enc->cur_master->in_clone_mode; |
| } |
| |
| static inline int _sde_encoder_power_enable(struct sde_encoder_virt *sde_enc, |
| bool enable) |
| { |
| struct drm_encoder *drm_enc; |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| |
| if (!sde_enc) { |
| SDE_ERROR("invalid sde enc\n"); |
| return -EINVAL; |
| } |
| |
| drm_enc = &sde_enc->base; |
| if (!drm_enc->dev || !drm_enc->dev->dev_private) { |
| SDE_ERROR("drm device invalid\n"); |
| return -EINVAL; |
| } |
| |
| priv = drm_enc->dev->dev_private; |
| if (!priv->kms) { |
| SDE_ERROR("invalid kms\n"); |
| return -EINVAL; |
| } |
| |
| sde_kms = to_sde_kms(priv->kms); |
| |
| return sde_power_resource_enable(&priv->phandle, sde_kms->core_client, |
| enable); |
| } |
| |
| void sde_encoder_helper_report_irq_timeout(struct sde_encoder_phys *phys_enc, |
| enum sde_intr_idx intr_idx) |
| { |
| SDE_EVT32(DRMID(phys_enc->parent), |
| phys_enc->intf_idx - INTF_0, |
| phys_enc->hw_pp->idx - PINGPONG_0, |
| intr_idx); |
| SDE_ERROR_PHYS(phys_enc, "irq %d timeout\n", intr_idx); |
| |
| if (phys_enc->parent_ops.handle_frame_done) |
| phys_enc->parent_ops.handle_frame_done( |
| phys_enc->parent, phys_enc, |
| SDE_ENCODER_FRAME_EVENT_ERROR); |
| } |
| |
| int sde_encoder_helper_wait_for_irq(struct sde_encoder_phys *phys_enc, |
| enum sde_intr_idx intr_idx, |
| struct sde_encoder_wait_info *wait_info) |
| { |
| struct sde_encoder_irq *irq; |
| u32 irq_status; |
| int ret; |
| |
| if (!phys_enc || !wait_info || intr_idx >= INTR_IDX_MAX) { |
| SDE_ERROR("invalid params\n"); |
| return -EINVAL; |
| } |
| irq = &phys_enc->irq[intr_idx]; |
| |
| /* note: do master / slave checking outside */ |
| |
| /* return EWOULDBLOCK since we know the wait isn't necessary */ |
| if (phys_enc->enable_state == SDE_ENC_DISABLED) { |
| SDE_ERROR_PHYS(phys_enc, "encoder is disabled\n"); |
| SDE_EVT32(DRMID(phys_enc->parent), intr_idx, irq->hw_idx, |
| irq->irq_idx, intr_idx, SDE_EVTLOG_ERROR); |
| return -EWOULDBLOCK; |
| } |
| |
| if (irq->irq_idx < 0) { |
| SDE_DEBUG_PHYS(phys_enc, "irq %s hw %d disabled, skip wait\n", |
| irq->name, irq->hw_idx); |
| SDE_EVT32(DRMID(phys_enc->parent), intr_idx, irq->hw_idx, |
| irq->irq_idx); |
| return 0; |
| } |
| |
| SDE_DEBUG_PHYS(phys_enc, "pending_cnt %d\n", |
| atomic_read(wait_info->atomic_cnt)); |
| SDE_EVT32_VERBOSE(DRMID(phys_enc->parent), intr_idx, irq->hw_idx, |
| irq->irq_idx, phys_enc->hw_pp->idx - PINGPONG_0, |
| atomic_read(wait_info->atomic_cnt), SDE_EVTLOG_FUNC_ENTRY); |
| |
| ret = sde_encoder_helper_wait_event_timeout( |
| DRMID(phys_enc->parent), |
| irq->hw_idx, |
| wait_info); |
| |
| if (ret <= 0) { |
| irq_status = sde_core_irq_read(phys_enc->sde_kms, |
| irq->irq_idx, true); |
| if (irq_status) { |
| unsigned long flags; |
| |
| SDE_EVT32(DRMID(phys_enc->parent), intr_idx, |
| irq->hw_idx, irq->irq_idx, |
| phys_enc->hw_pp->idx - PINGPONG_0, |
| atomic_read(wait_info->atomic_cnt)); |
| SDE_DEBUG_PHYS(phys_enc, |
| "done but irq %d not triggered\n", |
| irq->irq_idx); |
| local_irq_save(flags); |
| irq->cb.func(phys_enc, irq->irq_idx); |
| local_irq_restore(flags); |
| ret = 0; |
| } else { |
| ret = -ETIMEDOUT; |
| SDE_EVT32(DRMID(phys_enc->parent), intr_idx, |
| irq->hw_idx, irq->irq_idx, |
| phys_enc->hw_pp->idx - PINGPONG_0, |
| atomic_read(wait_info->atomic_cnt), irq_status, |
| SDE_EVTLOG_ERROR); |
| } |
| } else { |
| ret = 0; |
| SDE_EVT32(DRMID(phys_enc->parent), intr_idx, irq->hw_idx, |
| irq->irq_idx, phys_enc->hw_pp->idx - PINGPONG_0, |
| atomic_read(wait_info->atomic_cnt)); |
| } |
| |
| SDE_EVT32_VERBOSE(DRMID(phys_enc->parent), intr_idx, irq->hw_idx, |
| irq->irq_idx, ret, phys_enc->hw_pp->idx - PINGPONG_0, |
| atomic_read(wait_info->atomic_cnt), SDE_EVTLOG_FUNC_EXIT); |
| |
| return ret; |
| } |
| |
| int sde_encoder_helper_register_irq(struct sde_encoder_phys *phys_enc, |
| enum sde_intr_idx intr_idx) |
| { |
| struct sde_encoder_irq *irq; |
| int ret = 0; |
| |
| if (!phys_enc || intr_idx >= INTR_IDX_MAX) { |
| SDE_ERROR("invalid params\n"); |
| return -EINVAL; |
| } |
| irq = &phys_enc->irq[intr_idx]; |
| |
| if (irq->irq_idx >= 0) { |
| SDE_DEBUG_PHYS(phys_enc, |
| "skipping already registered irq %s type %d\n", |
| irq->name, irq->intr_type); |
| return 0; |
| } |
| |
| irq->irq_idx = sde_core_irq_idx_lookup(phys_enc->sde_kms, |
| irq->intr_type, irq->hw_idx); |
| if (irq->irq_idx < 0) { |
| SDE_ERROR_PHYS(phys_enc, |
| "failed to lookup IRQ index for %s type:%d\n", |
| irq->name, irq->intr_type); |
| return -EINVAL; |
| } |
| |
| ret = sde_core_irq_register_callback(phys_enc->sde_kms, irq->irq_idx, |
| &irq->cb); |
| if (ret) { |
| SDE_ERROR_PHYS(phys_enc, |
| "failed to register IRQ callback for %s\n", |
| irq->name); |
| irq->irq_idx = -EINVAL; |
| return ret; |
| } |
| |
| ret = sde_core_irq_enable(phys_enc->sde_kms, &irq->irq_idx, 1); |
| if (ret) { |
| SDE_ERROR_PHYS(phys_enc, |
| "enable IRQ for intr:%s failed, irq_idx %d\n", |
| irq->name, irq->irq_idx); |
| |
| sde_core_irq_unregister_callback(phys_enc->sde_kms, |
| irq->irq_idx, &irq->cb); |
| |
| SDE_EVT32(DRMID(phys_enc->parent), intr_idx, irq->hw_idx, |
| irq->irq_idx, SDE_EVTLOG_ERROR); |
| irq->irq_idx = -EINVAL; |
| return ret; |
| } |
| |
| SDE_EVT32(DRMID(phys_enc->parent), intr_idx, irq->hw_idx, irq->irq_idx); |
| SDE_DEBUG_PHYS(phys_enc, "registered irq %s idx: %d\n", |
| irq->name, irq->irq_idx); |
| |
| return ret; |
| } |
| |
| int sde_encoder_helper_unregister_irq(struct sde_encoder_phys *phys_enc, |
| enum sde_intr_idx intr_idx) |
| { |
| struct sde_encoder_irq *irq; |
| int ret; |
| |
| if (!phys_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return -EINVAL; |
| } |
| irq = &phys_enc->irq[intr_idx]; |
| |
| /* silently skip irqs that weren't registered */ |
| if (irq->irq_idx < 0) { |
| SDE_ERROR( |
| "extra unregister irq, enc%d intr_idx:0x%x hw_idx:0x%x irq_idx:0x%x\n", |
| DRMID(phys_enc->parent), intr_idx, irq->hw_idx, |
| irq->irq_idx); |
| SDE_EVT32(DRMID(phys_enc->parent), intr_idx, irq->hw_idx, |
| irq->irq_idx, SDE_EVTLOG_ERROR); |
| return 0; |
| } |
| |
| ret = sde_core_irq_disable(phys_enc->sde_kms, &irq->irq_idx, 1); |
| if (ret) |
| SDE_EVT32(DRMID(phys_enc->parent), intr_idx, irq->hw_idx, |
| irq->irq_idx, ret, SDE_EVTLOG_ERROR); |
| |
| ret = sde_core_irq_unregister_callback(phys_enc->sde_kms, irq->irq_idx, |
| &irq->cb); |
| if (ret) |
| SDE_EVT32(DRMID(phys_enc->parent), intr_idx, irq->hw_idx, |
| irq->irq_idx, ret, SDE_EVTLOG_ERROR); |
| |
| SDE_EVT32(DRMID(phys_enc->parent), intr_idx, irq->hw_idx, irq->irq_idx); |
| SDE_DEBUG_PHYS(phys_enc, "unregistered %d\n", irq->irq_idx); |
| |
| irq->irq_idx = -EINVAL; |
| |
| return 0; |
| } |
| |
| void sde_encoder_get_hw_resources(struct drm_encoder *drm_enc, |
| struct sde_encoder_hw_resources *hw_res, |
| struct drm_connector_state *conn_state) |
| { |
| struct sde_encoder_virt *sde_enc = NULL; |
| struct msm_mode_info mode_info; |
| int rc, i = 0; |
| |
| if (!hw_res || !drm_enc || !conn_state) { |
| SDE_ERROR("invalid argument(s), drm_enc %d, res %d, state %d\n", |
| drm_enc != 0, hw_res != 0, conn_state != 0); |
| return; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| |
| /* Query resources used by phys encs, expected to be without overlap */ |
| memset(hw_res, 0, sizeof(*hw_res)); |
| hw_res->display_num_of_h_tiles = sde_enc->display_num_of_h_tiles; |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys && phys->ops.get_hw_resources) |
| phys->ops.get_hw_resources(phys, hw_res, conn_state); |
| } |
| |
| /** |
| * NOTE: Do not use sde_encoder_get_mode_info here as this function is |
| * called from atomic_check phase. Use the below API to get mode |
| * information of the temporary conn_state passed. |
| */ |
| rc = sde_connector_get_mode_info(conn_state, &mode_info); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, "failed to get mode info\n"); |
| return; |
| } |
| |
| hw_res->topology = mode_info.topology; |
| hw_res->is_primary = sde_enc->disp_info.is_primary; |
| } |
| |
| void sde_encoder_destroy(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc = NULL; |
| int i = 0; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| |
| mutex_lock(&sde_enc->enc_lock); |
| sde_rsc_client_destroy(sde_enc->rsc_client); |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys && phys->ops.destroy) { |
| phys->ops.destroy(phys); |
| --sde_enc->num_phys_encs; |
| sde_enc->phys_encs[i] = NULL; |
| } |
| } |
| |
| if (sde_enc->num_phys_encs) |
| SDE_ERROR_ENC(sde_enc, "expected 0 num_phys_encs not %d\n", |
| sde_enc->num_phys_encs); |
| sde_enc->num_phys_encs = 0; |
| mutex_unlock(&sde_enc->enc_lock); |
| |
| drm_encoder_cleanup(drm_enc); |
| mutex_destroy(&sde_enc->enc_lock); |
| |
| if (sde_enc->input_handler) { |
| kfree(sde_enc->input_handler); |
| sde_enc->input_handler = NULL; |
| sde_enc->input_handler_registered = false; |
| } |
| |
| kfree(sde_enc); |
| } |
| |
| void sde_encoder_helper_split_config( |
| struct sde_encoder_phys *phys_enc, |
| enum sde_intf interface) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct split_pipe_cfg cfg = { 0 }; |
| struct sde_hw_mdp *hw_mdptop; |
| enum sde_rm_topology_name topology; |
| struct msm_display_info *disp_info; |
| |
| if (!phys_enc || !phys_enc->hw_mdptop || !phys_enc->parent) { |
| SDE_ERROR("invalid arg(s), encoder %d\n", phys_enc != 0); |
| return; |
| } |
| |
| sde_enc = to_sde_encoder_virt(phys_enc->parent); |
| hw_mdptop = phys_enc->hw_mdptop; |
| disp_info = &sde_enc->disp_info; |
| |
| if (disp_info->intf_type != DRM_MODE_CONNECTOR_DSI) |
| return; |
| |
| /** |
| * disable split modes since encoder will be operating in as the only |
| * encoder, either for the entire use case in the case of, for example, |
| * single DSI, or for this frame in the case of left/right only partial |
| * update. |
| */ |
| if (phys_enc->split_role == ENC_ROLE_SOLO) { |
| if (hw_mdptop->ops.setup_split_pipe) |
| hw_mdptop->ops.setup_split_pipe(hw_mdptop, &cfg); |
| if (hw_mdptop->ops.setup_pp_split) |
| hw_mdptop->ops.setup_pp_split(hw_mdptop, &cfg); |
| return; |
| } |
| |
| cfg.en = true; |
| cfg.mode = phys_enc->intf_mode; |
| cfg.intf = interface; |
| |
| if (cfg.en && phys_enc->ops.needs_single_flush && |
| phys_enc->ops.needs_single_flush(phys_enc)) |
| cfg.split_flush_en = true; |
| |
| topology = sde_connector_get_topology_name(phys_enc->connector); |
| if (topology == SDE_RM_TOPOLOGY_PPSPLIT) |
| cfg.pp_split_slave = cfg.intf; |
| else |
| cfg.pp_split_slave = INTF_MAX; |
| |
| if (phys_enc->split_role == ENC_ROLE_MASTER) { |
| SDE_DEBUG_ENC(sde_enc, "enable %d\n", cfg.en); |
| |
| if (hw_mdptop->ops.setup_split_pipe) |
| hw_mdptop->ops.setup_split_pipe(hw_mdptop, &cfg); |
| } else if (sde_enc->hw_pp[0]) { |
| /* |
| * slave encoder |
| * - determine split index from master index, |
| * assume master is first pp |
| */ |
| cfg.pp_split_index = sde_enc->hw_pp[0]->idx - PINGPONG_0; |
| SDE_DEBUG_ENC(sde_enc, "master using pp%d\n", |
| cfg.pp_split_index); |
| |
| if (hw_mdptop->ops.setup_pp_split) |
| hw_mdptop->ops.setup_pp_split(hw_mdptop, &cfg); |
| } |
| } |
| |
| static int sde_encoder_virt_atomic_check( |
| struct drm_encoder *drm_enc, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| const struct drm_display_mode *mode; |
| struct drm_display_mode *adj_mode; |
| struct sde_connector *sde_conn = NULL; |
| struct sde_connector_state *sde_conn_state = NULL; |
| struct sde_crtc_state *sde_crtc_state = NULL; |
| int i = 0; |
| int ret = 0; |
| |
| if (!drm_enc || !crtc_state || !conn_state) { |
| SDE_ERROR("invalid arg(s), drm_enc %d, crtc/conn state %d/%d\n", |
| drm_enc != 0, crtc_state != 0, conn_state != 0); |
| return -EINVAL; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| |
| priv = drm_enc->dev->dev_private; |
| sde_kms = to_sde_kms(priv->kms); |
| mode = &crtc_state->mode; |
| adj_mode = &crtc_state->adjusted_mode; |
| sde_conn = to_sde_connector(conn_state->connector); |
| sde_conn_state = to_sde_connector_state(conn_state); |
| sde_crtc_state = to_sde_crtc_state(crtc_state); |
| |
| SDE_EVT32(DRMID(drm_enc), drm_atomic_crtc_needs_modeset(crtc_state)); |
| |
| /* perform atomic check on the first physical encoder (master) */ |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys && phys->ops.atomic_check) |
| ret = phys->ops.atomic_check(phys, crtc_state, |
| conn_state); |
| else if (phys && phys->ops.mode_fixup) |
| if (!phys->ops.mode_fixup(phys, mode, adj_mode)) |
| ret = -EINVAL; |
| |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "mode unsupported, phys idx %d\n", i); |
| break; |
| } |
| } |
| |
| if (!ret && drm_atomic_crtc_needs_modeset(crtc_state)) { |
| struct sde_rect mode_roi, roi; |
| |
| mode_roi.x = 0; |
| mode_roi.y = 0; |
| mode_roi.w = crtc_state->adjusted_mode.hdisplay; |
| mode_roi.h = crtc_state->adjusted_mode.vdisplay; |
| |
| if (sde_conn_state->rois.num_rects) { |
| sde_kms_rect_merge_rectangles( |
| &sde_conn_state->rois, &roi); |
| if (!sde_kms_rect_is_equal(&mode_roi, &roi)) { |
| SDE_ERROR_ENC(sde_enc, |
| "roi (%d,%d,%d,%d) on connector invalid during modeset\n", |
| roi.x, roi.y, roi.w, roi.h); |
| ret = -EINVAL; |
| } |
| } |
| |
| if (sde_crtc_state->user_roi_list.num_rects) { |
| sde_kms_rect_merge_rectangles( |
| &sde_crtc_state->user_roi_list, &roi); |
| if (!sde_kms_rect_is_equal(&mode_roi, &roi)) { |
| SDE_ERROR_ENC(sde_enc, |
| "roi (%d,%d,%d,%d) on crtc invalid during modeset\n", |
| roi.x, roi.y, roi.w, roi.h); |
| ret = -EINVAL; |
| } |
| } |
| |
| if (ret) |
| return ret; |
| } |
| |
| if (!ret) { |
| /** |
| * record topology in previous atomic state to be able to handle |
| * topology transitions correctly. |
| */ |
| enum sde_rm_topology_name old_top; |
| |
| old_top = sde_connector_get_property(conn_state, |
| CONNECTOR_PROP_TOPOLOGY_NAME); |
| ret = sde_connector_set_old_topology_name(conn_state, old_top); |
| if (ret) |
| return ret; |
| } |
| |
| if (!ret && sde_conn && drm_atomic_crtc_needs_modeset(crtc_state)) { |
| struct msm_display_topology *topology = NULL; |
| |
| ret = sde_conn->ops.get_mode_info(adj_mode, |
| &sde_conn_state->mode_info, |
| sde_kms->catalog->max_mixer_width, |
| sde_conn->display); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "failed to get mode info, rc = %d\n", ret); |
| return ret; |
| } |
| |
| /* Reserve dynamic resources, indicating atomic_check phase */ |
| ret = sde_rm_reserve(&sde_kms->rm, drm_enc, crtc_state, |
| conn_state, true); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "RM failed to reserve resources, rc = %d\n", |
| ret); |
| return ret; |
| } |
| |
| /** |
| * Update connector state with the topology selected for the |
| * resource set validated. Reset the topology if we are |
| * de-activating crtc. |
| */ |
| if (crtc_state->active) |
| topology = &sde_conn_state->mode_info.topology; |
| |
| ret = sde_rm_update_topology(conn_state, topology); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "RM failed to update topology, rc: %d\n", ret); |
| return ret; |
| } |
| |
| ret = sde_connector_set_blob_data(conn_state->connector, |
| conn_state, |
| CONNECTOR_PROP_SDE_INFO); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "connector failed to update info, rc: %d\n", |
| ret); |
| return ret; |
| } |
| |
| } |
| |
| ret = sde_connector_roi_v1_check_roi(conn_state); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, "connector roi check failed, rc: %d", |
| ret); |
| return ret; |
| } |
| |
| if (!ret) |
| drm_mode_set_crtcinfo(adj_mode, 0); |
| |
| SDE_EVT32(DRMID(drm_enc), adj_mode->flags, adj_mode->private_flags); |
| |
| return ret; |
| } |
| |
| static int _sde_encoder_dsc_update_pic_dim(struct msm_display_dsc_info *dsc, |
| int pic_width, int pic_height) |
| { |
| if (!dsc || !pic_width || !pic_height) { |
| SDE_ERROR("invalid input: pic_width=%d pic_height=%d\n", |
| pic_width, pic_height); |
| return -EINVAL; |
| } |
| |
| if ((pic_width % dsc->slice_width) || |
| (pic_height % dsc->slice_height)) { |
| SDE_ERROR("pic_dim=%dx%d has to be multiple of slice=%dx%d\n", |
| pic_width, pic_height, |
| dsc->slice_width, dsc->slice_height); |
| return -EINVAL; |
| } |
| |
| dsc->pic_width = pic_width; |
| dsc->pic_height = pic_height; |
| |
| return 0; |
| } |
| |
| static void _sde_encoder_dsc_pclk_param_calc(struct msm_display_dsc_info *dsc, |
| int intf_width) |
| { |
| int slice_per_pkt, slice_per_intf; |
| int bytes_in_slice, total_bytes_per_intf; |
| |
| if (!dsc || !dsc->slice_width || !dsc->slice_per_pkt || |
| (intf_width < dsc->slice_width)) { |
| SDE_ERROR("invalid input: intf_width=%d slice_width=%d\n", |
| intf_width, dsc ? dsc->slice_width : -1); |
| return; |
| } |
| |
| slice_per_pkt = dsc->slice_per_pkt; |
| slice_per_intf = DIV_ROUND_UP(intf_width, dsc->slice_width); |
| |
| /* |
| * If slice_per_pkt is greater than slice_per_intf then default to 1. |
| * This can happen during partial update. |
| */ |
| if (slice_per_pkt > slice_per_intf) |
| slice_per_pkt = 1; |
| |
| bytes_in_slice = DIV_ROUND_UP(dsc->slice_width * dsc->bpp, 8); |
| total_bytes_per_intf = bytes_in_slice * slice_per_intf; |
| |
| dsc->eol_byte_num = total_bytes_per_intf % 3; |
| dsc->pclk_per_line = DIV_ROUND_UP(total_bytes_per_intf, 3); |
| dsc->bytes_in_slice = bytes_in_slice; |
| dsc->bytes_per_pkt = bytes_in_slice * slice_per_pkt; |
| dsc->pkt_per_line = slice_per_intf / slice_per_pkt; |
| } |
| |
| static int _sde_encoder_dsc_initial_line_calc(struct msm_display_dsc_info *dsc, |
| int enc_ip_width) |
| { |
| int ssm_delay, total_pixels, soft_slice_per_enc; |
| |
| soft_slice_per_enc = enc_ip_width / dsc->slice_width; |
| |
| /* |
| * minimum number of initial line pixels is a sum of: |
| * 1. sub-stream multiplexer delay (83 groups for 8bpc, |
| * 91 for 10 bpc) * 3 |
| * 2. for two soft slice cases, add extra sub-stream multiplexer * 3 |
| * 3. the initial xmit delay |
| * 4. total pipeline delay through the "lock step" of encoder (47) |
| * 5. 6 additional pixels as the output of the rate buffer is |
| * 48 bits wide |
| */ |
| ssm_delay = ((dsc->bpc < 10) ? 84 : 92); |
| total_pixels = ssm_delay * 3 + dsc->initial_xmit_delay + 47; |
| if (soft_slice_per_enc > 1) |
| total_pixels += (ssm_delay * 3); |
| dsc->initial_lines = DIV_ROUND_UP(total_pixels, dsc->slice_width); |
| return 0; |
| } |
| |
| static bool _sde_encoder_dsc_ich_reset_override_needed(bool pu_en, |
| struct msm_display_dsc_info *dsc) |
| { |
| /* |
| * As per the DSC spec, ICH_RESET can be either end of the slice line |
| * or at the end of the slice. HW internally generates ich_reset at |
| * end of the slice line if DSC_MERGE is used or encoder has two |
| * soft slices. However, if encoder has only 1 soft slice and DSC_MERGE |
| * is not used then it will generate ich_reset at the end of slice. |
| * |
| * Now as per the spec, during one PPS session, position where |
| * ich_reset is generated should not change. Now if full-screen frame |
| * has more than 1 soft slice then HW will automatically generate |
| * ich_reset at the end of slice_line. But for the same panel, if |
| * partial frame is enabled and only 1 encoder is used with 1 slice, |
| * then HW will generate ich_reset at end of the slice. This is a |
| * mismatch. Prevent this by overriding HW's decision. |
| */ |
| return pu_en && dsc && (dsc->full_frame_slices > 1) && |
| (dsc->slice_width == dsc->pic_width); |
| } |
| |
| static void _sde_encoder_dsc_pipe_cfg(struct sde_hw_dsc *hw_dsc, |
| struct sde_hw_pingpong *hw_pp, struct msm_display_dsc_info *dsc, |
| u32 common_mode, bool ich_reset, bool enable) |
| { |
| if (!enable) { |
| if (hw_pp->ops.disable_dsc) |
| hw_pp->ops.disable_dsc(hw_pp); |
| return; |
| } |
| |
| if (hw_dsc->ops.dsc_config) |
| hw_dsc->ops.dsc_config(hw_dsc, dsc, common_mode, ich_reset); |
| |
| if (hw_dsc->ops.dsc_config_thresh) |
| hw_dsc->ops.dsc_config_thresh(hw_dsc, dsc); |
| |
| if (hw_pp->ops.setup_dsc) |
| hw_pp->ops.setup_dsc(hw_pp); |
| |
| if (hw_pp->ops.enable_dsc) |
| hw_pp->ops.enable_dsc(hw_pp); |
| } |
| |
| static void _sde_encoder_get_connector_roi( |
| struct sde_encoder_virt *sde_enc, |
| struct sde_rect *merged_conn_roi) |
| { |
| struct drm_connector *drm_conn; |
| struct sde_connector_state *c_state; |
| |
| if (!sde_enc || !merged_conn_roi) |
| return; |
| |
| drm_conn = sde_enc->phys_encs[0]->connector; |
| |
| if (!drm_conn || !drm_conn->state) |
| return; |
| |
| c_state = to_sde_connector_state(drm_conn->state); |
| sde_kms_rect_merge_rectangles(&c_state->rois, merged_conn_roi); |
| } |
| |
| static int _sde_encoder_dsc_n_lm_1_enc_1_intf(struct sde_encoder_virt *sde_enc) |
| { |
| int this_frame_slices; |
| int intf_ip_w, enc_ip_w; |
| int ich_res, dsc_common_mode = 0; |
| |
| struct sde_hw_pingpong *hw_pp = sde_enc->hw_pp[0]; |
| struct sde_hw_dsc *hw_dsc = sde_enc->hw_dsc[0]; |
| struct sde_encoder_phys *enc_master = sde_enc->cur_master; |
| const struct sde_rect *roi = &sde_enc->cur_conn_roi; |
| struct msm_mode_info mode_info; |
| struct msm_display_dsc_info *dsc = NULL; |
| int rc; |
| |
| if (hw_dsc == NULL || hw_pp == NULL || !enc_master) { |
| SDE_ERROR_ENC(sde_enc, "invalid params for DSC\n"); |
| return -EINVAL; |
| } |
| |
| rc = _sde_encoder_get_mode_info(&sde_enc->base, &mode_info); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, "failed to get mode info\n"); |
| return -EINVAL; |
| } |
| |
| dsc = &mode_info.comp_info.dsc_info; |
| |
| _sde_encoder_dsc_update_pic_dim(dsc, roi->w, roi->h); |
| |
| this_frame_slices = roi->w / dsc->slice_width; |
| intf_ip_w = this_frame_slices * dsc->slice_width; |
| _sde_encoder_dsc_pclk_param_calc(dsc, intf_ip_w); |
| |
| enc_ip_w = intf_ip_w; |
| _sde_encoder_dsc_initial_line_calc(dsc, enc_ip_w); |
| |
| ich_res = _sde_encoder_dsc_ich_reset_override_needed(false, dsc); |
| |
| if (enc_master->intf_mode == INTF_MODE_VIDEO) |
| dsc_common_mode = DSC_MODE_VIDEO; |
| |
| SDE_DEBUG_ENC(sde_enc, "pic_w: %d pic_h: %d mode:%d\n", |
| roi->w, roi->h, dsc_common_mode); |
| SDE_EVT32(DRMID(&sde_enc->base), roi->w, roi->h, dsc_common_mode); |
| |
| _sde_encoder_dsc_pipe_cfg(hw_dsc, hw_pp, dsc, dsc_common_mode, |
| ich_res, true); |
| |
| return 0; |
| } |
| |
| static int _sde_encoder_dsc_2_lm_2_enc_2_intf(struct sde_encoder_virt *sde_enc, |
| struct sde_encoder_kickoff_params *params) |
| { |
| int this_frame_slices; |
| int intf_ip_w, enc_ip_w; |
| int ich_res, dsc_common_mode; |
| |
| struct sde_encoder_phys *enc_master = sde_enc->cur_master; |
| const struct sde_rect *roi = &sde_enc->cur_conn_roi; |
| struct sde_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; |
| struct sde_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; |
| struct msm_display_dsc_info dsc[MAX_CHANNELS_PER_ENC]; |
| struct msm_mode_info mode_info; |
| bool half_panel_partial_update; |
| int i, rc; |
| |
| for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { |
| hw_pp[i] = sde_enc->hw_pp[i]; |
| hw_dsc[i] = sde_enc->hw_dsc[i]; |
| |
| if (!hw_pp[i] || !hw_dsc[i]) { |
| SDE_ERROR_ENC(sde_enc, "invalid params for DSC\n"); |
| return -EINVAL; |
| } |
| } |
| |
| rc = _sde_encoder_get_mode_info(&sde_enc->base, &mode_info); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, "failed to get mode info\n"); |
| return -EINVAL; |
| } |
| |
| half_panel_partial_update = |
| hweight_long(params->affected_displays) == 1; |
| |
| dsc_common_mode = 0; |
| if (!half_panel_partial_update) |
| dsc_common_mode |= DSC_MODE_SPLIT_PANEL; |
| if (enc_master->intf_mode == INTF_MODE_VIDEO) |
| dsc_common_mode |= DSC_MODE_VIDEO; |
| |
| memcpy(&dsc[0], &mode_info.comp_info.dsc_info, sizeof(dsc[0])); |
| memcpy(&dsc[1], &mode_info.comp_info.dsc_info, sizeof(dsc[1])); |
| |
| /* |
| * Since both DSC use same pic dimension, set same pic dimension |
| * to both DSC structures. |
| */ |
| _sde_encoder_dsc_update_pic_dim(&dsc[0], roi->w, roi->h); |
| _sde_encoder_dsc_update_pic_dim(&dsc[1], roi->w, roi->h); |
| |
| this_frame_slices = roi->w / dsc[0].slice_width; |
| intf_ip_w = this_frame_slices * dsc[0].slice_width; |
| |
| if (!half_panel_partial_update) |
| intf_ip_w /= 2; |
| |
| /* |
| * In this topology when both interfaces are active, they have same |
| * load so intf_ip_w will be same. |
| */ |
| _sde_encoder_dsc_pclk_param_calc(&dsc[0], intf_ip_w); |
| _sde_encoder_dsc_pclk_param_calc(&dsc[1], intf_ip_w); |
| |
| /* |
| * In this topology, since there is no dsc_merge, uncompressed input |
| * to encoder and interface is same. |
| */ |
| enc_ip_w = intf_ip_w; |
| _sde_encoder_dsc_initial_line_calc(&dsc[0], enc_ip_w); |
| _sde_encoder_dsc_initial_line_calc(&dsc[1], enc_ip_w); |
| |
| /* |
| * __is_ich_reset_override_needed should be called only after |
| * updating pic dimension, mdss_panel_dsc_update_pic_dim. |
| */ |
| ich_res = _sde_encoder_dsc_ich_reset_override_needed( |
| half_panel_partial_update, &dsc[0]); |
| |
| SDE_DEBUG_ENC(sde_enc, "pic_w: %d pic_h: %d mode:%d\n", |
| roi->w, roi->h, dsc_common_mode); |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| bool active = !!((1 << i) & params->affected_displays); |
| |
| SDE_EVT32(DRMID(&sde_enc->base), roi->w, roi->h, |
| dsc_common_mode, i, active); |
| _sde_encoder_dsc_pipe_cfg(hw_dsc[i], hw_pp[i], &dsc[i], |
| dsc_common_mode, ich_res, active); |
| } |
| |
| return 0; |
| } |
| |
| static int _sde_encoder_dsc_2_lm_2_enc_1_intf(struct sde_encoder_virt *sde_enc, |
| struct sde_encoder_kickoff_params *params) |
| { |
| int this_frame_slices; |
| int intf_ip_w, enc_ip_w; |
| int ich_res, dsc_common_mode; |
| |
| struct sde_encoder_phys *enc_master = sde_enc->cur_master; |
| const struct sde_rect *roi = &sde_enc->cur_conn_roi; |
| struct sde_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC]; |
| struct sde_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC]; |
| struct msm_display_dsc_info *dsc = NULL; |
| struct msm_mode_info mode_info; |
| bool half_panel_partial_update; |
| int i, rc; |
| |
| for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { |
| hw_pp[i] = sde_enc->hw_pp[i]; |
| hw_dsc[i] = sde_enc->hw_dsc[i]; |
| |
| if (!hw_pp[i] || !hw_dsc[i]) { |
| SDE_ERROR_ENC(sde_enc, "invalid params for DSC\n"); |
| return -EINVAL; |
| } |
| } |
| |
| rc = _sde_encoder_get_mode_info(&sde_enc->base, &mode_info); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, "failed to get mode info\n"); |
| return -EINVAL; |
| } |
| |
| dsc = &mode_info.comp_info.dsc_info; |
| |
| half_panel_partial_update = |
| hweight_long(params->affected_displays) == 1; |
| |
| dsc_common_mode = 0; |
| if (!half_panel_partial_update) |
| dsc_common_mode |= DSC_MODE_SPLIT_PANEL | DSC_MODE_MULTIPLEX; |
| if (enc_master->intf_mode == INTF_MODE_VIDEO) |
| dsc_common_mode |= DSC_MODE_VIDEO; |
| |
| _sde_encoder_dsc_update_pic_dim(dsc, roi->w, roi->h); |
| |
| this_frame_slices = roi->w / dsc->slice_width; |
| intf_ip_w = this_frame_slices * dsc->slice_width; |
| _sde_encoder_dsc_pclk_param_calc(dsc, intf_ip_w); |
| |
| /* |
| * dsc merge case: when using 2 encoders for the same stream, |
| * no. of slices need to be same on both the encoders. |
| */ |
| enc_ip_w = intf_ip_w / 2; |
| _sde_encoder_dsc_initial_line_calc(dsc, enc_ip_w); |
| |
| ich_res = _sde_encoder_dsc_ich_reset_override_needed( |
| half_panel_partial_update, dsc); |
| |
| SDE_DEBUG_ENC(sde_enc, "pic_w: %d pic_h: %d mode:%d\n", |
| roi->w, roi->h, dsc_common_mode); |
| SDE_EVT32(DRMID(&sde_enc->base), roi->w, roi->h, |
| dsc_common_mode, i, params->affected_displays); |
| |
| _sde_encoder_dsc_pipe_cfg(hw_dsc[0], hw_pp[0], dsc, dsc_common_mode, |
| ich_res, true); |
| _sde_encoder_dsc_pipe_cfg(hw_dsc[1], hw_pp[1], dsc, dsc_common_mode, |
| ich_res, !half_panel_partial_update); |
| |
| return 0; |
| } |
| |
| static int _sde_encoder_update_roi(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct drm_connector *drm_conn; |
| struct drm_display_mode *adj_mode; |
| struct sde_rect roi; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder parameter\n"); |
| return -EINVAL; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| if (!sde_enc->crtc || !sde_enc->crtc->state) { |
| SDE_ERROR("invalid crtc parameter\n"); |
| return -EINVAL; |
| } |
| |
| if (!sde_enc->cur_master) { |
| SDE_ERROR("invalid cur_master parameter\n"); |
| return -EINVAL; |
| } |
| |
| adj_mode = &sde_enc->cur_master->cached_mode; |
| drm_conn = sde_enc->cur_master->connector; |
| |
| _sde_encoder_get_connector_roi(sde_enc, &roi); |
| if (sde_kms_rect_is_null(&roi)) { |
| roi.w = adj_mode->hdisplay; |
| roi.h = adj_mode->vdisplay; |
| } |
| |
| memcpy(&sde_enc->prv_conn_roi, &sde_enc->cur_conn_roi, |
| sizeof(sde_enc->prv_conn_roi)); |
| memcpy(&sde_enc->cur_conn_roi, &roi, sizeof(sde_enc->cur_conn_roi)); |
| |
| return 0; |
| } |
| |
| static int _sde_encoder_dsc_setup(struct sde_encoder_virt *sde_enc, |
| struct sde_encoder_kickoff_params *params) |
| { |
| enum sde_rm_topology_name topology; |
| struct drm_connector *drm_conn; |
| int ret = 0; |
| |
| if (!sde_enc || !params || !sde_enc->phys_encs[0] || |
| !sde_enc->phys_encs[0]->connector) |
| return -EINVAL; |
| |
| drm_conn = sde_enc->phys_encs[0]->connector; |
| |
| topology = sde_connector_get_topology_name(drm_conn); |
| if (topology == SDE_RM_TOPOLOGY_NONE) { |
| SDE_ERROR_ENC(sde_enc, "topology not set yet\n"); |
| return -EINVAL; |
| } |
| |
| SDE_DEBUG_ENC(sde_enc, "topology:%d\n", topology); |
| SDE_EVT32(DRMID(&sde_enc->base), topology, |
| sde_enc->cur_conn_roi.x, |
| sde_enc->cur_conn_roi.y, |
| sde_enc->cur_conn_roi.w, |
| sde_enc->cur_conn_roi.h, |
| sde_enc->prv_conn_roi.x, |
| sde_enc->prv_conn_roi.y, |
| sde_enc->prv_conn_roi.w, |
| sde_enc->prv_conn_roi.h, |
| sde_enc->cur_master->cached_mode.hdisplay, |
| sde_enc->cur_master->cached_mode.vdisplay); |
| |
| if (sde_kms_rect_is_equal(&sde_enc->cur_conn_roi, |
| &sde_enc->prv_conn_roi)) |
| return ret; |
| |
| switch (topology) { |
| case SDE_RM_TOPOLOGY_SINGLEPIPE_DSC: |
| case SDE_RM_TOPOLOGY_DUALPIPE_3DMERGE_DSC: |
| ret = _sde_encoder_dsc_n_lm_1_enc_1_intf(sde_enc); |
| break; |
| case SDE_RM_TOPOLOGY_DUALPIPE_DSCMERGE: |
| ret = _sde_encoder_dsc_2_lm_2_enc_1_intf(sde_enc, params); |
| break; |
| case SDE_RM_TOPOLOGY_DUALPIPE_DSC: |
| case SDE_RM_TOPOLOGY_QUADPIPE_3DMERGE_DSC: |
| ret = _sde_encoder_dsc_2_lm_2_enc_2_intf(sde_enc, params); |
| break; |
| default: |
| SDE_ERROR_ENC(sde_enc, "No DSC support for topology %d", |
| topology); |
| return -EINVAL; |
| }; |
| |
| return ret; |
| } |
| |
| static void _sde_encoder_update_vsync_source(struct sde_encoder_virt *sde_enc, |
| struct msm_display_info *disp_info, bool is_dummy) |
| { |
| struct sde_vsync_source_cfg vsync_cfg = { 0 }; |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| struct sde_hw_mdp *hw_mdptop; |
| struct drm_encoder *drm_enc; |
| struct msm_mode_info mode_info; |
| int i, rc = 0; |
| |
| if (!sde_enc || !sde_enc->cur_master || !disp_info) { |
| SDE_ERROR("invalid param sde_enc:%d or disp_info:%d\n", |
| sde_enc != NULL, disp_info != NULL); |
| return; |
| } else if (sde_enc->num_phys_encs > ARRAY_SIZE(sde_enc->hw_pp)) { |
| SDE_ERROR("invalid num phys enc %d/%d\n", |
| sde_enc->num_phys_encs, |
| (int) ARRAY_SIZE(sde_enc->hw_pp)); |
| return; |
| } |
| |
| drm_enc = &sde_enc->base; |
| /* this pointers are checked in virt_enable_helper */ |
| priv = drm_enc->dev->dev_private; |
| |
| sde_kms = to_sde_kms(priv->kms); |
| if (!sde_kms) { |
| SDE_ERROR("invalid sde_kms\n"); |
| return; |
| } |
| |
| hw_mdptop = sde_kms->hw_mdp; |
| if (!hw_mdptop) { |
| SDE_ERROR("invalid mdptop\n"); |
| return; |
| } |
| |
| rc = _sde_encoder_get_mode_info(drm_enc, &mode_info); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, "failed to get mode info\n"); |
| return; |
| } |
| |
| if (hw_mdptop->ops.setup_vsync_source && |
| disp_info->capabilities & MSM_DISPLAY_CAP_CMD_MODE) { |
| for (i = 0; i < sde_enc->num_phys_encs; i++) |
| vsync_cfg.ppnumber[i] = sde_enc->hw_pp[i]->idx; |
| |
| vsync_cfg.pp_count = sde_enc->num_phys_encs; |
| vsync_cfg.frame_rate = mode_info.frame_rate; |
| vsync_cfg.vsync_source = |
| sde_enc->cur_master->hw_pp->caps->te_source; |
| if (is_dummy) |
| vsync_cfg.vsync_source = SDE_VSYNC_SOURCE_WD_TIMER_1; |
| else if (disp_info->is_te_using_watchdog_timer) |
| vsync_cfg.vsync_source = SDE_VSYNC_SOURCE_WD_TIMER_0; |
| |
| vsync_cfg.is_dummy = is_dummy; |
| |
| hw_mdptop->ops.setup_vsync_source(hw_mdptop, &vsync_cfg); |
| } |
| } |
| |
| static int _sde_encoder_dsc_disable(struct sde_encoder_virt *sde_enc) |
| { |
| int i, ret = 0; |
| struct sde_hw_pingpong *hw_pp = NULL; |
| struct sde_hw_dsc *hw_dsc = NULL; |
| |
| if (!sde_enc || !sde_enc->phys_encs[0] || |
| !sde_enc->phys_encs[0]->connector) { |
| SDE_ERROR("invalid params %d %d\n", |
| !sde_enc, sde_enc ? !sde_enc->phys_encs[0] : -1); |
| return -EINVAL; |
| } |
| |
| /* Disable DSC for all the pp's present in this topology */ |
| for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { |
| hw_pp = sde_enc->hw_pp[i]; |
| hw_dsc = sde_enc->hw_dsc[i]; |
| |
| if (hw_pp && hw_pp->ops.disable_dsc) |
| hw_pp->ops.disable_dsc(hw_pp); |
| |
| if (hw_dsc && hw_dsc->ops.dsc_disable) |
| hw_dsc->ops.dsc_disable(hw_dsc); |
| } |
| |
| return ret; |
| } |
| |
| static int _sde_encoder_switch_to_watchdog_vsync(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct msm_display_info disp_info; |
| |
| if (!drm_enc) { |
| pr_err("invalid drm encoder\n"); |
| return -EINVAL; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| |
| sde_encoder_control_te(drm_enc, false); |
| |
| memcpy(&disp_info, &sde_enc->disp_info, sizeof(disp_info)); |
| disp_info.is_te_using_watchdog_timer = true; |
| _sde_encoder_update_vsync_source(sde_enc, &disp_info, false); |
| |
| sde_encoder_control_te(drm_enc, true); |
| |
| return 0; |
| } |
| |
| static int _sde_encoder_update_rsc_client( |
| struct drm_encoder *drm_enc, |
| struct sde_encoder_rsc_config *config, bool enable) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct drm_crtc *crtc; |
| enum sde_rsc_state rsc_state; |
| struct sde_rsc_cmd_config *rsc_config; |
| int ret, prefill_lines; |
| struct msm_display_info *disp_info; |
| struct msm_mode_info mode_info; |
| int wait_vblank_crtc_id = SDE_RSC_INVALID_CRTC_ID; |
| int wait_count = 0; |
| struct drm_crtc *primary_crtc; |
| int pipe = -1; |
| int rc = 0; |
| int wait_refcount; |
| |
| if (!drm_enc || !drm_enc->dev) { |
| SDE_ERROR("invalid encoder arguments\n"); |
| return -EINVAL; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| crtc = sde_enc->crtc; |
| |
| if (!sde_enc->crtc) { |
| SDE_ERROR("invalid crtc parameter\n"); |
| return -EINVAL; |
| } |
| disp_info = &sde_enc->disp_info; |
| rsc_config = &sde_enc->rsc_config; |
| |
| if (!sde_enc->rsc_client) { |
| SDE_DEBUG_ENC(sde_enc, "rsc client not created\n"); |
| return 0; |
| } |
| |
| rc = _sde_encoder_get_mode_info(drm_enc, &mode_info); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, "failed to mode info\n"); |
| return 0; |
| } |
| |
| /** |
| * only primary command mode panel can request CMD state. |
| * all other panels/displays can request for VID state including |
| * secondary command mode panel. |
| * Clone mode encoder can request CLK STATE only. |
| */ |
| if (sde_encoder_in_clone_mode(drm_enc)) |
| rsc_state = enable ? SDE_RSC_CLK_STATE : SDE_RSC_IDLE_STATE; |
| else |
| rsc_state = enable ? |
| (((disp_info->capabilities & MSM_DISPLAY_CAP_CMD_MODE) |
| && disp_info->is_primary) ? SDE_RSC_CMD_STATE : |
| SDE_RSC_VID_STATE) : SDE_RSC_IDLE_STATE; |
| |
| prefill_lines = config ? mode_info.prefill_lines + |
| config->inline_rotate_prefill : mode_info.prefill_lines; |
| |
| /* compare specific items and reconfigure the rsc */ |
| if ((rsc_config->fps != mode_info.frame_rate) || |
| (rsc_config->vtotal != mode_info.vtotal) || |
| (rsc_config->prefill_lines != prefill_lines) || |
| (rsc_config->jitter_numer != mode_info.jitter_numer) || |
| (rsc_config->jitter_denom != mode_info.jitter_denom)) { |
| rsc_config->fps = mode_info.frame_rate; |
| rsc_config->vtotal = mode_info.vtotal; |
| rsc_config->prefill_lines = prefill_lines; |
| rsc_config->jitter_numer = mode_info.jitter_numer; |
| rsc_config->jitter_denom = mode_info.jitter_denom; |
| sde_enc->rsc_state_init = false; |
| } |
| |
| if (rsc_state != SDE_RSC_IDLE_STATE && !sde_enc->rsc_state_init |
| && disp_info->is_primary) { |
| /* update it only once */ |
| sde_enc->rsc_state_init = true; |
| |
| ret = sde_rsc_client_state_update(sde_enc->rsc_client, |
| rsc_state, rsc_config, crtc->base.id, |
| &wait_vblank_crtc_id); |
| } else { |
| ret = sde_rsc_client_state_update(sde_enc->rsc_client, |
| rsc_state, NULL, crtc->base.id, |
| &wait_vblank_crtc_id); |
| } |
| |
| /** |
| * if RSC performed a state change that requires a VBLANK wait, it will |
| * set wait_vblank_crtc_id to the CRTC whose VBLANK we must wait on. |
| * |
| * if we are the primary display, we will need to enable and wait |
| * locally since we hold the commit thread |
| * |
| * if we are an external display, we must send a signal to the primary |
| * to enable its VBLANK and wait one, since the RSC hardware is driven |
| * by the primary panel's VBLANK signals |
| */ |
| SDE_EVT32_VERBOSE(DRMID(drm_enc), wait_vblank_crtc_id); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "sde rsc client update failed ret:%d\n", ret); |
| return ret; |
| } else if (wait_vblank_crtc_id == SDE_RSC_INVALID_CRTC_ID) { |
| return ret; |
| } |
| |
| if (wait_vblank_crtc_id) |
| wait_refcount = |
| sde_rsc_client_get_vsync_refcount(sde_enc->rsc_client); |
| SDE_EVT32_VERBOSE(DRMID(drm_enc), wait_vblank_crtc_id, wait_refcount, |
| SDE_EVTLOG_FUNC_ENTRY); |
| |
| if (crtc->base.id != wait_vblank_crtc_id) { |
| primary_crtc = drm_crtc_find(drm_enc->dev, wait_vblank_crtc_id); |
| if (!primary_crtc) { |
| SDE_ERROR_ENC(sde_enc, |
| "failed to find primary crtc id %d\n", |
| wait_vblank_crtc_id); |
| return -EINVAL; |
| } |
| pipe = drm_crtc_index(primary_crtc); |
| } |
| |
| /** |
| * note: VBLANK is expected to be enabled at this point in |
| * resource control state machine if on primary CRTC |
| */ |
| for (wait_count = 0; wait_count < MAX_RSC_WAIT; wait_count++) { |
| if (sde_rsc_client_is_state_update_complete( |
| sde_enc->rsc_client)) |
| break; |
| |
| if (crtc->base.id == wait_vblank_crtc_id) |
| ret = sde_encoder_wait_for_event(drm_enc, |
| MSM_ENC_VBLANK); |
| else |
| drm_wait_one_vblank(drm_enc->dev, pipe); |
| |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "wait for vblank failed ret:%d\n", ret); |
| /** |
| * rsc hardware may hang without vsync. avoid rsc hang |
| * by generating the vsync from watchdog timer. |
| */ |
| if (crtc->base.id == wait_vblank_crtc_id) |
| _sde_encoder_switch_to_watchdog_vsync(drm_enc); |
| } |
| } |
| |
| if (wait_count >= MAX_RSC_WAIT) |
| SDE_EVT32(DRMID(drm_enc), wait_vblank_crtc_id, wait_count, |
| SDE_EVTLOG_ERROR); |
| |
| if (wait_refcount) |
| sde_rsc_client_reset_vsync_refcount(sde_enc->rsc_client); |
| SDE_EVT32_VERBOSE(DRMID(drm_enc), wait_vblank_crtc_id, wait_refcount, |
| SDE_EVTLOG_FUNC_EXIT); |
| |
| return ret; |
| } |
| |
| static void _sde_encoder_irq_control(struct drm_encoder *drm_enc, bool enable) |
| { |
| struct sde_encoder_virt *sde_enc; |
| int i; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| |
| SDE_DEBUG_ENC(sde_enc, "enable:%d\n", enable); |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys && phys->ops.irq_control) |
| phys->ops.irq_control(phys, enable); |
| } |
| |
| } |
| |
| /* keep track of the userspace vblank during modeset */ |
| static void _sde_encoder_modeset_helper_locked(struct drm_encoder *drm_enc, |
| u32 sw_event) |
| { |
| struct sde_encoder_virt *sde_enc; |
| bool enable; |
| int i; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| SDE_DEBUG_ENC(sde_enc, "sw_event:%d, vblank_enabled:%d\n", |
| sw_event, sde_enc->vblank_enabled); |
| |
| /* nothing to do if vblank not enabled by userspace */ |
| if (!sde_enc->vblank_enabled) |
| return; |
| |
| /* disable vblank on pre_modeset */ |
| if (sw_event == SDE_ENC_RC_EVENT_PRE_MODESET) |
| enable = false; |
| /* enable vblank on post_modeset */ |
| else if (sw_event == SDE_ENC_RC_EVENT_POST_MODESET) |
| enable = true; |
| else |
| return; |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys && phys->ops.control_vblank_irq) |
| phys->ops.control_vblank_irq(phys, enable); |
| } |
| } |
| |
| struct sde_rsc_client *sde_encoder_get_rsc_client(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc; |
| |
| if (!drm_enc) |
| return NULL; |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| return sde_enc->rsc_client; |
| } |
| |
| static void _sde_encoder_resource_control_rsc_update( |
| struct drm_encoder *drm_enc, bool enable) |
| { |
| struct sde_encoder_rsc_config rsc_cfg = { 0 }; |
| struct sde_encoder_virt *sde_enc; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder argument\n"); |
| return; |
| } |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| if (!sde_enc->crtc) { |
| SDE_ERROR("invalid crtc\n"); |
| return; |
| } |
| |
| if (enable) { |
| rsc_cfg.inline_rotate_prefill = |
| sde_crtc_get_inline_prefill(sde_enc->crtc); |
| |
| _sde_encoder_update_rsc_client(drm_enc, &rsc_cfg, true); |
| } else { |
| _sde_encoder_update_rsc_client(drm_enc, NULL, false); |
| } |
| } |
| |
| static int _sde_encoder_resource_control_helper(struct drm_encoder *drm_enc, |
| bool enable) |
| { |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| struct sde_encoder_virt *sde_enc; |
| int rc; |
| bool is_cmd_mode, is_primary; |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| priv = drm_enc->dev->dev_private; |
| sde_kms = to_sde_kms(priv->kms); |
| |
| is_cmd_mode = sde_enc->disp_info.capabilities & |
| MSM_DISPLAY_CAP_CMD_MODE; |
| is_primary = sde_enc->disp_info.is_primary; |
| |
| SDE_DEBUG_ENC(sde_enc, "enable:%d\n", enable); |
| SDE_EVT32(DRMID(drm_enc), enable); |
| |
| if (!sde_enc->cur_master) { |
| SDE_ERROR("encoder master not set\n"); |
| return -EINVAL; |
| } |
| |
| if (enable) { |
| /* enable SDE core clks */ |
| rc = sde_power_resource_enable(&priv->phandle, |
| sde_kms->core_client, true); |
| if (rc) { |
| SDE_ERROR("failed to enable power resource %d\n", rc); |
| SDE_EVT32(rc, SDE_EVTLOG_ERROR); |
| return rc; |
| } |
| |
| sde_enc->elevated_ahb_vote = true; |
| /* enable DSI clks */ |
| rc = sde_connector_clk_ctrl(sde_enc->cur_master->connector, |
| true); |
| if (rc) { |
| SDE_ERROR("failed to enable clk control %d\n", rc); |
| sde_power_resource_enable(&priv->phandle, |
| sde_kms->core_client, false); |
| return rc; |
| } |
| |
| /* enable all the irq */ |
| _sde_encoder_irq_control(drm_enc, true); |
| |
| if (is_cmd_mode && is_primary) |
| _sde_encoder_pm_qos_add_request(drm_enc); |
| |
| } else { |
| if (is_cmd_mode && is_primary) |
| _sde_encoder_pm_qos_remove_request(drm_enc); |
| |
| /* disable all the irq */ |
| _sde_encoder_irq_control(drm_enc, false); |
| |
| /* disable DSI clks */ |
| sde_connector_clk_ctrl(sde_enc->cur_master->connector, false); |
| |
| /* disable SDE core clks */ |
| sde_power_resource_enable(&priv->phandle, |
| sde_kms->core_client, false); |
| } |
| |
| return 0; |
| } |
| |
| static void sde_encoder_input_event_handler(struct input_handle *handle, |
| unsigned int type, unsigned int code, int value) |
| { |
| struct drm_encoder *drm_enc = NULL; |
| struct sde_encoder_virt *sde_enc = NULL; |
| struct msm_drm_thread *event_thread = NULL; |
| struct msm_drm_private *priv = NULL; |
| |
| if (!handle || !handle->handler || !handle->handler->private) { |
| SDE_ERROR("invalid encoder for the input event\n"); |
| return; |
| } |
| |
| drm_enc = (struct drm_encoder *)handle->handler->private; |
| if (!drm_enc->dev || !drm_enc->dev->dev_private) { |
| SDE_ERROR("invalid parameters\n"); |
| return; |
| } |
| |
| priv = drm_enc->dev->dev_private; |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| if (!sde_enc->crtc || (sde_enc->crtc->index |
| >= ARRAY_SIZE(priv->event_thread))) { |
| SDE_DEBUG_ENC(sde_enc, |
| "invalid cached CRTC: %d or crtc index: %d\n", |
| sde_enc->crtc == NULL, |
| sde_enc->crtc ? sde_enc->crtc->index : -EINVAL); |
| return; |
| } |
| |
| SDE_EVT32_VERBOSE(DRMID(drm_enc)); |
| |
| event_thread = &priv->event_thread[sde_enc->crtc->index]; |
| |
| /* Queue input event work to event thread */ |
| kthread_queue_work(&event_thread->worker, |
| &sde_enc->input_event_work); |
| } |
| |
| void sde_encoder_control_idle_pc(struct drm_encoder *drm_enc, bool enable) |
| { |
| struct sde_encoder_virt *sde_enc; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| |
| /* return early if there is no state change */ |
| if (sde_enc->idle_pc_enabled == enable) |
| return; |
| |
| sde_enc->idle_pc_enabled = enable; |
| |
| SDE_DEBUG("idle-pc state:%d\n", sde_enc->idle_pc_enabled); |
| SDE_EVT32(sde_enc->idle_pc_enabled); |
| } |
| |
| static int sde_encoder_resource_control(struct drm_encoder *drm_enc, |
| u32 sw_event) |
| { |
| bool autorefresh_enabled = false; |
| unsigned int lp, idle_pc_duration; |
| struct sde_encoder_virt *sde_enc; |
| struct msm_drm_private *priv; |
| struct msm_drm_thread *disp_thread; |
| int ret; |
| bool is_vid_mode = false; |
| |
| if (!drm_enc || !drm_enc->dev || !drm_enc->dev->dev_private) { |
| SDE_ERROR("invalid encoder parameters, sw_event:%u\n", |
| sw_event); |
| return -EINVAL; |
| } |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| priv = drm_enc->dev->dev_private; |
| is_vid_mode = sde_enc->disp_info.capabilities & |
| MSM_DISPLAY_CAP_VID_MODE; |
| |
| /* |
| * when idle_pc is not supported, process only KICKOFF, STOP and MODESET |
| * events and return early for other events (ie wb display). |
| */ |
| if (!sde_enc->idle_pc_enabled && |
| (sw_event != SDE_ENC_RC_EVENT_KICKOFF && |
| sw_event != SDE_ENC_RC_EVENT_PRE_MODESET && |
| sw_event != SDE_ENC_RC_EVENT_POST_MODESET && |
| sw_event != SDE_ENC_RC_EVENT_STOP && |
| sw_event != SDE_ENC_RC_EVENT_PRE_STOP)) |
| return 0; |
| |
| SDE_DEBUG_ENC(sde_enc, "sw_event:%d, idle_pc:%d\n", |
| sw_event, sde_enc->idle_pc_enabled); |
| SDE_EVT32_VERBOSE(DRMID(drm_enc), sw_event, sde_enc->idle_pc_enabled, |
| sde_enc->rc_state, SDE_EVTLOG_FUNC_ENTRY); |
| |
| switch (sw_event) { |
| case SDE_ENC_RC_EVENT_KICKOFF: |
| /* cancel delayed off work, if any */ |
| if (kthread_cancel_delayed_work_sync( |
| &sde_enc->delayed_off_work)) |
| SDE_DEBUG_ENC(sde_enc, "sw_event:%d, work cancelled\n", |
| sw_event); |
| |
| mutex_lock(&sde_enc->rc_lock); |
| |
| /* return if the resource control is already in ON state */ |
| if (sde_enc->rc_state == SDE_ENC_RC_STATE_ON) { |
| SDE_DEBUG_ENC(sde_enc, "sw_event:%d, rc in ON state\n", |
| sw_event); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_EVTLOG_FUNC_CASE1); |
| mutex_unlock(&sde_enc->rc_lock); |
| return 0; |
| } else if (sde_enc->rc_state != SDE_ENC_RC_STATE_OFF && |
| sde_enc->rc_state != SDE_ENC_RC_STATE_IDLE) { |
| SDE_ERROR_ENC(sde_enc, "sw_event:%d, rc in state %d\n", |
| sw_event, sde_enc->rc_state); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_EVTLOG_ERROR); |
| mutex_unlock(&sde_enc->rc_lock); |
| return -EINVAL; |
| } |
| |
| if (is_vid_mode && sde_enc->rc_state == SDE_ENC_RC_STATE_IDLE) { |
| _sde_encoder_irq_control(drm_enc, true); |
| } else { |
| /* enable all the clks and resources */ |
| ret = _sde_encoder_resource_control_helper(drm_enc, |
| true); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "sw_event:%d, rc in state %d\n", |
| sw_event, sde_enc->rc_state); |
| SDE_EVT32(DRMID(drm_enc), sw_event, |
| sde_enc->rc_state, |
| SDE_EVTLOG_ERROR); |
| mutex_unlock(&sde_enc->rc_lock); |
| return ret; |
| } |
| |
| _sde_encoder_resource_control_rsc_update(drm_enc, true); |
| } |
| |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_ENC_RC_STATE_ON, SDE_EVTLOG_FUNC_CASE1); |
| sde_enc->rc_state = SDE_ENC_RC_STATE_ON; |
| |
| mutex_unlock(&sde_enc->rc_lock); |
| break; |
| |
| case SDE_ENC_RC_EVENT_FRAME_DONE: |
| if (!sde_enc->crtc) { |
| SDE_ERROR("invalid crtc, sw_event:%u\n", sw_event); |
| return -EINVAL; |
| } |
| |
| if (sde_enc->crtc->index >= ARRAY_SIZE(priv->disp_thread)) { |
| SDE_ERROR("invalid crtc index :%u\n", |
| sde_enc->crtc->index); |
| return -EINVAL; |
| } |
| disp_thread = &priv->disp_thread[sde_enc->crtc->index]; |
| |
| /* |
| * mutex lock is not used as this event happens at interrupt |
| * context. And locking is not required as, the other events |
| * like KICKOFF and STOP does a wait-for-idle before executing |
| * the resource_control |
| */ |
| if (sde_enc->rc_state != SDE_ENC_RC_STATE_ON) { |
| SDE_ERROR_ENC(sde_enc, "sw_event:%d,rc:%d-unexpected\n", |
| sw_event, sde_enc->rc_state); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_EVTLOG_ERROR); |
| return -EINVAL; |
| } |
| |
| /* |
| * schedule off work item only when there are no |
| * frames pending |
| */ |
| if (sde_crtc_frame_pending(sde_enc->crtc) > 1) { |
| SDE_DEBUG_ENC(sde_enc, "skip schedule work"); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_EVTLOG_FUNC_CASE2); |
| return 0; |
| } |
| |
| /* schedule delayed off work if autorefresh is disabled */ |
| if (sde_enc->cur_master && |
| sde_enc->cur_master->ops.is_autorefresh_enabled) |
| autorefresh_enabled = |
| sde_enc->cur_master->ops.is_autorefresh_enabled( |
| sde_enc->cur_master); |
| |
| /* set idle timeout based on master connector's lp value */ |
| if (sde_enc->cur_master) |
| lp = sde_connector_get_lp( |
| sde_enc->cur_master->connector); |
| else |
| lp = SDE_MODE_DPMS_ON; |
| |
| if (lp == SDE_MODE_DPMS_LP2) |
| idle_pc_duration = IDLE_SHORT_TIMEOUT; |
| else |
| idle_pc_duration = IDLE_POWERCOLLAPSE_DURATION; |
| |
| if (!autorefresh_enabled) |
| kthread_mod_delayed_work( |
| &disp_thread->worker, |
| &sde_enc->delayed_off_work, |
| msecs_to_jiffies(idle_pc_duration)); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| autorefresh_enabled, |
| idle_pc_duration, SDE_EVTLOG_FUNC_CASE2); |
| SDE_DEBUG_ENC(sde_enc, "sw_event:%d, work scheduled\n", |
| sw_event); |
| break; |
| |
| case SDE_ENC_RC_EVENT_PRE_STOP: |
| /* cancel delayed off work, if any */ |
| if (kthread_cancel_delayed_work_sync( |
| &sde_enc->delayed_off_work)) |
| SDE_DEBUG_ENC(sde_enc, "sw_event:%d, work cancelled\n", |
| sw_event); |
| |
| mutex_lock(&sde_enc->rc_lock); |
| |
| if (is_vid_mode && |
| sde_enc->rc_state == SDE_ENC_RC_STATE_IDLE) { |
| _sde_encoder_irq_control(drm_enc, true); |
| } |
| /* skip if is already OFF or IDLE, resources are off already */ |
| else if (sde_enc->rc_state == SDE_ENC_RC_STATE_OFF || |
| sde_enc->rc_state == SDE_ENC_RC_STATE_IDLE) { |
| SDE_DEBUG_ENC(sde_enc, "sw_event:%d, rc in %d state\n", |
| sw_event, sde_enc->rc_state); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_EVTLOG_FUNC_CASE3); |
| mutex_unlock(&sde_enc->rc_lock); |
| return 0; |
| } |
| |
| /** |
| * IRQs are still enabled currently, which allows wait for |
| * VBLANK which RSC may require to correctly transition to OFF |
| */ |
| _sde_encoder_resource_control_rsc_update(drm_enc, false); |
| |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_ENC_RC_STATE_PRE_OFF, |
| SDE_EVTLOG_FUNC_CASE3); |
| |
| sde_enc->rc_state = SDE_ENC_RC_STATE_PRE_OFF; |
| |
| mutex_unlock(&sde_enc->rc_lock); |
| break; |
| |
| case SDE_ENC_RC_EVENT_STOP: |
| /* cancel vsync event work and timer */ |
| kthread_cancel_work_sync(&sde_enc->vsync_event_work); |
| del_timer_sync(&sde_enc->vsync_event_timer); |
| |
| mutex_lock(&sde_enc->rc_lock); |
| /* return if the resource control is already in OFF state */ |
| if (sde_enc->rc_state == SDE_ENC_RC_STATE_OFF) { |
| SDE_DEBUG_ENC(sde_enc, "sw_event:%d, rc in OFF state\n", |
| sw_event); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_EVTLOG_FUNC_CASE4); |
| mutex_unlock(&sde_enc->rc_lock); |
| return 0; |
| } else if (sde_enc->rc_state == SDE_ENC_RC_STATE_ON || |
| sde_enc->rc_state == SDE_ENC_RC_STATE_MODESET) { |
| SDE_ERROR_ENC(sde_enc, "sw_event:%d, rc in state %d\n", |
| sw_event, sde_enc->rc_state); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_EVTLOG_ERROR); |
| mutex_unlock(&sde_enc->rc_lock); |
| return -EINVAL; |
| } |
| |
| /** |
| * expect to arrive here only if in either idle state or pre-off |
| * and in IDLE state the resources are already disabled |
| */ |
| if (sde_enc->rc_state == SDE_ENC_RC_STATE_PRE_OFF) |
| _sde_encoder_resource_control_helper(drm_enc, false); |
| |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_ENC_RC_STATE_OFF, SDE_EVTLOG_FUNC_CASE4); |
| |
| sde_enc->rc_state = SDE_ENC_RC_STATE_OFF; |
| |
| mutex_unlock(&sde_enc->rc_lock); |
| break; |
| |
| case SDE_ENC_RC_EVENT_PRE_MODESET: |
| /* cancel delayed off work, if any */ |
| if (kthread_cancel_delayed_work_sync( |
| &sde_enc->delayed_off_work)) |
| SDE_DEBUG_ENC(sde_enc, "sw_event:%d, work cancelled\n", |
| sw_event); |
| |
| mutex_lock(&sde_enc->rc_lock); |
| |
| /* return if the resource control is already in ON state */ |
| if (sde_enc->rc_state != SDE_ENC_RC_STATE_ON) { |
| /* enable all the clks and resources */ |
| ret = _sde_encoder_resource_control_helper(drm_enc, |
| true); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "sw_event:%d, rc in state %d\n", |
| sw_event, sde_enc->rc_state); |
| SDE_EVT32(DRMID(drm_enc), sw_event, |
| sde_enc->rc_state, |
| SDE_EVTLOG_ERROR); |
| mutex_unlock(&sde_enc->rc_lock); |
| return ret; |
| } |
| |
| _sde_encoder_resource_control_rsc_update(drm_enc, true); |
| |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_ENC_RC_STATE_ON, SDE_EVTLOG_FUNC_CASE5); |
| sde_enc->rc_state = SDE_ENC_RC_STATE_ON; |
| } |
| |
| ret = sde_encoder_wait_for_event(drm_enc, MSM_ENC_TX_COMPLETE); |
| if (ret && ret != -EWOULDBLOCK) { |
| SDE_ERROR_ENC(sde_enc, |
| "wait for commit done returned %d\n", |
| ret); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| ret, SDE_EVTLOG_ERROR); |
| mutex_unlock(&sde_enc->rc_lock); |
| return -EINVAL; |
| } |
| |
| _sde_encoder_irq_control(drm_enc, false); |
| _sde_encoder_modeset_helper_locked(drm_enc, sw_event); |
| |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_ENC_RC_STATE_MODESET, SDE_EVTLOG_FUNC_CASE5); |
| |
| sde_enc->rc_state = SDE_ENC_RC_STATE_MODESET; |
| mutex_unlock(&sde_enc->rc_lock); |
| break; |
| |
| case SDE_ENC_RC_EVENT_POST_MODESET: |
| mutex_lock(&sde_enc->rc_lock); |
| |
| /* return if the resource control is already in ON state */ |
| if (sde_enc->rc_state != SDE_ENC_RC_STATE_MODESET) { |
| SDE_ERROR_ENC(sde_enc, |
| "sw_event:%d, rc:%d !MODESET state\n", |
| sw_event, sde_enc->rc_state); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_EVTLOG_ERROR); |
| mutex_unlock(&sde_enc->rc_lock); |
| return -EINVAL; |
| } |
| |
| _sde_encoder_modeset_helper_locked(drm_enc, sw_event); |
| _sde_encoder_irq_control(drm_enc, true); |
| |
| _sde_encoder_update_rsc_client(drm_enc, NULL, true); |
| |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_ENC_RC_STATE_ON, SDE_EVTLOG_FUNC_CASE6); |
| |
| sde_enc->rc_state = SDE_ENC_RC_STATE_ON; |
| |
| mutex_unlock(&sde_enc->rc_lock); |
| break; |
| |
| case SDE_ENC_RC_EVENT_ENTER_IDLE: |
| mutex_lock(&sde_enc->rc_lock); |
| |
| if (sde_enc->rc_state != SDE_ENC_RC_STATE_ON) { |
| SDE_DEBUG_ENC(sde_enc, "sw_event:%d, rc:%d !ON state\n", |
| sw_event, sde_enc->rc_state); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_EVTLOG_ERROR); |
| mutex_unlock(&sde_enc->rc_lock); |
| return 0; |
| } |
| |
| /* |
| * if we are in ON but a frame was just kicked off, |
| * ignore the IDLE event, it's probably a stale timer event |
| */ |
| if (sde_enc->frame_busy_mask[0]) { |
| SDE_ERROR_ENC(sde_enc, |
| "sw_event:%d, rc:%d frame pending\n", |
| sw_event, sde_enc->rc_state); |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_EVTLOG_ERROR); |
| mutex_unlock(&sde_enc->rc_lock); |
| return 0; |
| } |
| |
| if (is_vid_mode) { |
| _sde_encoder_irq_control(drm_enc, false); |
| } else { |
| /* disable all the clks and resources */ |
| _sde_encoder_resource_control_rsc_update(drm_enc, |
| false); |
| _sde_encoder_resource_control_helper(drm_enc, false); |
| } |
| |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_ENC_RC_STATE_IDLE, SDE_EVTLOG_FUNC_CASE7); |
| sde_enc->rc_state = SDE_ENC_RC_STATE_IDLE; |
| |
| mutex_unlock(&sde_enc->rc_lock); |
| break; |
| case SDE_ENC_RC_EVENT_EARLY_WAKEUP: |
| if (!sde_enc->crtc || |
| sde_enc->crtc->index >= ARRAY_SIZE(priv->disp_thread)) { |
| SDE_DEBUG_ENC(sde_enc, |
| "invalid crtc:%d or crtc index:%d , sw_event:%u\n", |
| sde_enc->crtc == NULL, |
| sde_enc->crtc ? sde_enc->crtc->index : -EINVAL, |
| sw_event); |
| return -EINVAL; |
| } |
| |
| disp_thread = &priv->disp_thread[sde_enc->crtc->index]; |
| |
| mutex_lock(&sde_enc->rc_lock); |
| |
| if (sde_enc->rc_state == SDE_ENC_RC_STATE_ON) { |
| if (sde_enc->cur_master && |
| sde_enc->cur_master->ops.is_autorefresh_enabled) |
| autorefresh_enabled = |
| sde_enc->cur_master->ops.is_autorefresh_enabled( |
| sde_enc->cur_master); |
| if (autorefresh_enabled) { |
| SDE_DEBUG_ENC(sde_enc, |
| "not handling early wakeup since auto refresh is enabled\n"); |
| mutex_unlock(&sde_enc->rc_lock); |
| return 0; |
| } |
| |
| if (!sde_crtc_frame_pending(sde_enc->crtc)) |
| kthread_mod_delayed_work(&disp_thread->worker, |
| &sde_enc->delayed_off_work, |
| msecs_to_jiffies( |
| IDLE_POWERCOLLAPSE_DURATION)); |
| } else if (sde_enc->rc_state == SDE_ENC_RC_STATE_IDLE) { |
| /* enable all the clks and resources */ |
| _sde_encoder_resource_control_rsc_update(drm_enc, true); |
| _sde_encoder_resource_control_helper(drm_enc, true); |
| |
| /* |
| * In some cases, commit comes with slight delay |
| * (> 80 ms)after early wake up, prevent clock switch |
| * off to avoid jank in next update. So, increase the |
| * command mode idle timeout sufficiently to prevent |
| * such case. |
| */ |
| kthread_mod_delayed_work(&disp_thread->worker, |
| &sde_enc->delayed_off_work, |
| msecs_to_jiffies( |
| IDLE_POWERCOLLAPSE_IN_EARLY_WAKEUP)); |
| |
| sde_enc->rc_state = SDE_ENC_RC_STATE_ON; |
| } |
| |
| SDE_EVT32(DRMID(drm_enc), sw_event, sde_enc->rc_state, |
| SDE_ENC_RC_STATE_ON, SDE_EVTLOG_FUNC_CASE8); |
| |
| mutex_unlock(&sde_enc->rc_lock); |
| break; |
| default: |
| SDE_EVT32(DRMID(drm_enc), sw_event, SDE_EVTLOG_ERROR); |
| SDE_ERROR("unexpected sw_event: %d\n", sw_event); |
| break; |
| } |
| |
| SDE_EVT32_VERBOSE(DRMID(drm_enc), sw_event, sde_enc->idle_pc_enabled, |
| sde_enc->rc_state, SDE_EVTLOG_FUNC_EXIT); |
| return 0; |
| } |
| |
| static void sde_encoder_virt_mode_set(struct drm_encoder *drm_enc, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adj_mode) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| struct list_head *connector_list; |
| struct drm_connector *conn = NULL, *conn_iter; |
| struct sde_connector_state *sde_conn_state = NULL; |
| struct sde_connector *sde_conn = NULL; |
| struct sde_rm_hw_iter dsc_iter, pp_iter; |
| int i = 0, ret; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| |
| if (!sde_kms_power_resource_is_enabled(drm_enc->dev)) { |
| SDE_ERROR("power resource is not enabled\n"); |
| return; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| |
| priv = drm_enc->dev->dev_private; |
| sde_kms = to_sde_kms(priv->kms); |
| connector_list = &sde_kms->dev->mode_config.connector_list; |
| |
| SDE_EVT32(DRMID(drm_enc)); |
| |
| /* |
| * cache the crtc in sde_enc on enable for duration of use case |
| * for correctly servicing asynchronous irq events and timers |
| */ |
| if (!drm_enc->crtc) { |
| SDE_ERROR("invalid crtc\n"); |
| return; |
| } |
| sde_enc->crtc = drm_enc->crtc; |
| |
| list_for_each_entry(conn_iter, connector_list, head) |
| if (conn_iter->encoder == drm_enc) |
| conn = conn_iter; |
| |
| if (!conn) { |
| SDE_ERROR_ENC(sde_enc, "failed to find attached connector\n"); |
| return; |
| } else if (!conn->state) { |
| SDE_ERROR_ENC(sde_enc, "invalid connector state\n"); |
| return; |
| } |
| |
| sde_conn = to_sde_connector(conn); |
| sde_conn_state = to_sde_connector_state(conn->state); |
| if (sde_conn && sde_conn_state) { |
| ret = sde_conn->ops.get_mode_info(adj_mode, |
| &sde_conn_state->mode_info, |
| sde_kms->catalog->max_mixer_width, |
| sde_conn->display); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "failed to get mode info from the display\n"); |
| return; |
| } |
| } |
| |
| /* release resources before seamless mode change */ |
| if (msm_is_mode_seamless_dms(adj_mode)) { |
| /* restore resource state before releasing them */ |
| ret = sde_encoder_resource_control(drm_enc, |
| SDE_ENC_RC_EVENT_PRE_MODESET); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "sde resource control failed: %d\n", |
| ret); |
| return; |
| } |
| |
| /* |
| * Disable dsc before switch the mode and after pre_modeset, |
| * to guarantee that previous kickoff finished. |
| */ |
| _sde_encoder_dsc_disable(sde_enc); |
| } |
| |
| /* Reserve dynamic resources now. Indicating non-AtomicTest phase */ |
| ret = sde_rm_reserve(&sde_kms->rm, drm_enc, drm_enc->crtc->state, |
| conn->state, false); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "failed to reserve hw resources, %d\n", ret); |
| return; |
| } |
| |
| sde_rm_init_hw_iter(&pp_iter, drm_enc->base.id, SDE_HW_BLK_PINGPONG); |
| for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { |
| sde_enc->hw_pp[i] = NULL; |
| if (!sde_rm_get_hw(&sde_kms->rm, &pp_iter)) |
| break; |
| sde_enc->hw_pp[i] = (struct sde_hw_pingpong *) pp_iter.hw; |
| } |
| |
| sde_rm_init_hw_iter(&dsc_iter, drm_enc->base.id, SDE_HW_BLK_DSC); |
| for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { |
| sde_enc->hw_dsc[i] = NULL; |
| if (!sde_rm_get_hw(&sde_kms->rm, &dsc_iter)) |
| break; |
| sde_enc->hw_dsc[i] = (struct sde_hw_dsc *) dsc_iter.hw; |
| } |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys) { |
| if (!sde_enc->hw_pp[i]) { |
| SDE_ERROR_ENC(sde_enc, |
| "invalid pingpong block for the encoder\n"); |
| return; |
| } |
| phys->hw_pp = sde_enc->hw_pp[i]; |
| phys->connector = conn->state->connector; |
| if (phys->ops.mode_set) |
| phys->ops.mode_set(phys, mode, adj_mode); |
| } |
| } |
| |
| /* update resources after seamless mode change */ |
| if (msm_is_mode_seamless_dms(adj_mode)) |
| sde_encoder_resource_control(&sde_enc->base, |
| SDE_ENC_RC_EVENT_POST_MODESET); |
| } |
| |
| void sde_encoder_control_te(struct drm_encoder *drm_enc, bool enable) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct sde_encoder_phys *phys; |
| int i; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid parameters\n"); |
| return; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| if (!sde_enc) { |
| SDE_ERROR("invalid sde encoder\n"); |
| return; |
| } |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| phys = sde_enc->phys_encs[i]; |
| if (phys && phys->ops.control_te) |
| phys->ops.control_te(phys, enable); |
| } |
| } |
| |
| static int _sde_encoder_input_connect(struct input_handler *handler, |
| struct input_dev *dev, const struct input_device_id *id) |
| { |
| struct input_handle *handle; |
| int rc = 0; |
| |
| handle = kzalloc(sizeof(*handle), GFP_KERNEL); |
| if (!handle) |
| return -ENOMEM; |
| |
| handle->dev = dev; |
| handle->handler = handler; |
| handle->name = handler->name; |
| |
| rc = input_register_handle(handle); |
| if (rc) { |
| pr_err("failed to register input handle\n"); |
| goto error; |
| } |
| |
| rc = input_open_device(handle); |
| if (rc) { |
| pr_err("failed to open input device\n"); |
| goto error_unregister; |
| } |
| |
| return 0; |
| |
| error_unregister: |
| input_unregister_handle(handle); |
| |
| error: |
| kfree(handle); |
| |
| return rc; |
| } |
| |
| static void _sde_encoder_input_disconnect(struct input_handle *handle) |
| { |
| input_close_device(handle); |
| input_unregister_handle(handle); |
| kfree(handle); |
| } |
| |
| /** |
| * Structure for specifying event parameters on which to receive callbacks. |
| * This structure will trigger a callback in case of a touch event (specified by |
| * EV_ABS) where there is a change in X and Y coordinates, |
| */ |
| static const struct input_device_id sde_input_ids[] = { |
| { |
| .flags = INPUT_DEVICE_ID_MATCH_EVBIT, |
| .evbit = { BIT_MASK(EV_ABS) }, |
| .absbit = { [BIT_WORD(ABS_MT_POSITION_X)] = |
| BIT_MASK(ABS_MT_POSITION_X) | |
| BIT_MASK(ABS_MT_POSITION_Y) }, |
| }, |
| { }, |
| }; |
| |
| static int _sde_encoder_input_handler_register( |
| struct input_handler *input_handler) |
| { |
| int rc = 0; |
| |
| rc = input_register_handler(input_handler); |
| if (rc) { |
| pr_err("input_register_handler failed, rc= %d\n", rc); |
| kfree(input_handler); |
| return rc; |
| } |
| |
| return rc; |
| } |
| |
| static int _sde_encoder_input_handler( |
| struct sde_encoder_virt *sde_enc) |
| { |
| struct input_handler *input_handler = NULL; |
| int rc = 0; |
| |
| if (sde_enc->input_handler) { |
| SDE_ERROR_ENC(sde_enc, |
| "input_handle is active. unexpected\n"); |
| return -EINVAL; |
| } |
| |
| input_handler = kzalloc(sizeof(*sde_enc->input_handler), GFP_KERNEL); |
| if (!input_handler) |
| return -ENOMEM; |
| |
| input_handler->event = sde_encoder_input_event_handler; |
| input_handler->connect = _sde_encoder_input_connect; |
| input_handler->disconnect = _sde_encoder_input_disconnect; |
| input_handler->name = "sde"; |
| input_handler->id_table = sde_input_ids; |
| input_handler->private = sde_enc; |
| |
| sde_enc->input_handler = input_handler; |
| sde_enc->input_handler_registered = false; |
| |
| return rc; |
| } |
| |
| static void _sde_encoder_virt_enable_helper(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc = NULL; |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| |
| if (!drm_enc || !drm_enc->dev || !drm_enc->dev->dev_private) { |
| SDE_ERROR("invalid parameters\n"); |
| return; |
| } |
| |
| priv = drm_enc->dev->dev_private; |
| sde_kms = to_sde_kms(priv->kms); |
| if (!sde_kms) { |
| SDE_ERROR("invalid sde_kms\n"); |
| return; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| if (!sde_enc || !sde_enc->cur_master) { |
| SDE_ERROR("invalid sde encoder/master\n"); |
| return; |
| } |
| |
| if (sde_enc->disp_info.intf_type == DRM_MODE_CONNECTOR_DisplayPort && |
| sde_enc->cur_master->hw_mdptop && |
| sde_enc->cur_master->hw_mdptop->ops.intf_audio_select) |
| sde_enc->cur_master->hw_mdptop->ops.intf_audio_select( |
| sde_enc->cur_master->hw_mdptop); |
| |
| if (sde_enc->cur_master->hw_mdptop && |
| sde_enc->cur_master->hw_mdptop->ops.reset_ubwc) |
| sde_enc->cur_master->hw_mdptop->ops.reset_ubwc( |
| sde_enc->cur_master->hw_mdptop, |
| sde_kms->catalog); |
| |
| _sde_encoder_update_vsync_source(sde_enc, &sde_enc->disp_info, false); |
| sde_encoder_control_te(drm_enc, true); |
| |
| memset(&sde_enc->prv_conn_roi, 0, sizeof(sde_enc->prv_conn_roi)); |
| memset(&sde_enc->cur_conn_roi, 0, sizeof(sde_enc->cur_conn_roi)); |
| } |
| |
| void sde_encoder_virt_restore(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc = NULL; |
| int i; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys && (phys != sde_enc->cur_master) && phys->ops.restore) |
| phys->ops.restore(phys); |
| } |
| |
| if (sde_enc->cur_master && sde_enc->cur_master->ops.restore) |
| sde_enc->cur_master->ops.restore(sde_enc->cur_master); |
| |
| _sde_encoder_virt_enable_helper(drm_enc); |
| } |
| |
| static void sde_encoder_off_work(struct kthread_work *work) |
| { |
| struct sde_encoder_virt *sde_enc = container_of(work, |
| struct sde_encoder_virt, delayed_off_work.work); |
| struct drm_encoder *drm_enc; |
| |
| if (!sde_enc) { |
| SDE_ERROR("invalid sde encoder\n"); |
| return; |
| } |
| drm_enc = &sde_enc->base; |
| |
| sde_encoder_idle_request(drm_enc); |
| } |
| |
| static void sde_encoder_virt_enable(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc = NULL; |
| int i, ret = 0; |
| struct msm_compression_info *comp_info = NULL; |
| struct drm_display_mode *cur_mode = NULL; |
| struct msm_mode_info mode_info; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| |
| if (!sde_kms_power_resource_is_enabled(drm_enc->dev)) { |
| SDE_ERROR("power resource is not enabled\n"); |
| return; |
| } |
| |
| ret = _sde_encoder_get_mode_info(drm_enc, &mode_info); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, "failed to get mode info\n"); |
| return; |
| } |
| |
| if (drm_enc->crtc && !sde_enc->crtc) |
| sde_enc->crtc = drm_enc->crtc; |
| |
| comp_info = &mode_info.comp_info; |
| cur_mode = &sde_enc->base.crtc->state->adjusted_mode; |
| |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| SDE_EVT32(DRMID(drm_enc), cur_mode->hdisplay, cur_mode->vdisplay); |
| |
| sde_enc->cur_master = NULL; |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys && phys->ops.is_master && phys->ops.is_master(phys)) { |
| SDE_DEBUG_ENC(sde_enc, "master is now idx %d\n", i); |
| sde_enc->cur_master = phys; |
| break; |
| } |
| } |
| |
| if (!sde_enc->cur_master) { |
| SDE_ERROR("virt encoder has no master! num_phys %d\n", i); |
| return; |
| } |
| |
| if (sde_enc->input_handler && !sde_enc->input_handler_registered) { |
| ret = _sde_encoder_input_handler_register( |
| sde_enc->input_handler); |
| if (ret) |
| SDE_ERROR( |
| "input handler registration failed, rc = %d\n", ret); |
| else |
| sde_enc->input_handler_registered = true; |
| } |
| |
| if (!(msm_is_mode_seamless_vrr(cur_mode) |
| || msm_is_mode_seamless_dms(cur_mode))) |
| kthread_init_delayed_work(&sde_enc->delayed_off_work, |
| sde_encoder_off_work); |
| |
| ret = sde_encoder_resource_control(drm_enc, SDE_ENC_RC_EVENT_KICKOFF); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, "sde resource control failed: %d\n", |
| ret); |
| return; |
| } |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (!phys) |
| continue; |
| |
| phys->comp_type = comp_info->comp_type; |
| if (phys != sde_enc->cur_master) { |
| /** |
| * on DMS request, the encoder will be enabled |
| * already. Invoke restore to reconfigure the |
| * new mode. |
| */ |
| if (msm_is_mode_seamless_dms(cur_mode) && |
| phys->ops.restore) |
| phys->ops.restore(phys); |
| else if (phys->ops.enable) |
| phys->ops.enable(phys); |
| } |
| |
| if (sde_enc->misr_enable && (sde_enc->disp_info.capabilities & |
| MSM_DISPLAY_CAP_VID_MODE) && phys->ops.setup_misr) |
| phys->ops.setup_misr(phys, true, |
| sde_enc->misr_frame_count); |
| } |
| |
| if (msm_is_mode_seamless_dms(cur_mode) && |
| sde_enc->cur_master->ops.restore) |
| sde_enc->cur_master->ops.restore(sde_enc->cur_master); |
| else if (sde_enc->cur_master->ops.enable) |
| sde_enc->cur_master->ops.enable(sde_enc->cur_master); |
| |
| _sde_encoder_virt_enable_helper(drm_enc); |
| } |
| |
| static void sde_encoder_virt_disable(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc = NULL; |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| enum sde_intf_mode intf_mode; |
| int i = 0; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } else if (!drm_enc->dev) { |
| SDE_ERROR("invalid dev\n"); |
| return; |
| } else if (!drm_enc->dev->dev_private) { |
| SDE_ERROR("invalid dev_private\n"); |
| return; |
| } |
| |
| if (!sde_kms_power_resource_is_enabled(drm_enc->dev)) { |
| SDE_ERROR("power resource is not enabled\n"); |
| return; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| |
| priv = drm_enc->dev->dev_private; |
| sde_kms = to_sde_kms(priv->kms); |
| intf_mode = sde_encoder_get_intf_mode(drm_enc); |
| |
| SDE_EVT32(DRMID(drm_enc)); |
| |
| if (sde_enc->input_handler && sde_enc->input_handler_registered) { |
| input_unregister_handler(sde_enc->input_handler); |
| sde_enc->input_handler_registered = false; |
| } |
| |
| |
| /* wait for idle */ |
| sde_encoder_wait_for_event(drm_enc, MSM_ENC_TX_COMPLETE); |
| |
| kthread_flush_work(&sde_enc->input_event_work); |
| |
| /* |
| * For primary command mode encoders, execute the resource control |
| * pre-stop operations before the physical encoders are disabled, to |
| * allow the rsc to transition its states properly. |
| * |
| * For other encoder types, rsc should not be enabled until after |
| * they have been fully disabled, so delay the pre-stop operations |
| * until after the physical disable calls have returned. |
| */ |
| if (sde_enc->disp_info.is_primary && intf_mode == INTF_MODE_CMD) { |
| sde_encoder_resource_control(drm_enc, |
| SDE_ENC_RC_EVENT_PRE_STOP); |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys && phys->ops.disable) |
| phys->ops.disable(phys); |
| } |
| } else { |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys && phys->ops.disable) |
| phys->ops.disable(phys); |
| } |
| sde_encoder_resource_control(drm_enc, |
| SDE_ENC_RC_EVENT_PRE_STOP); |
| } |
| |
| /* |
| * disable dsc after the transfer is complete (for command mode) |
| * and after physical encoder is disabled, to make sure timing |
| * engine is already disabled (for video mode). |
| */ |
| _sde_encoder_dsc_disable(sde_enc); |
| |
| sde_encoder_resource_control(drm_enc, SDE_ENC_RC_EVENT_STOP); |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| if (sde_enc->phys_encs[i]) { |
| sde_enc->phys_encs[i]->cont_splash_settings = false; |
| sde_enc->phys_encs[i]->cont_splash_single_flush = 0; |
| sde_enc->phys_encs[i]->connector = NULL; |
| } |
| } |
| |
| sde_enc->cur_master = NULL; |
| /* |
| * clear the cached crtc in sde_enc on use case finish, after all the |
| * outstanding events and timers have been completed |
| */ |
| sde_enc->crtc = NULL; |
| |
| SDE_DEBUG_ENC(sde_enc, "encoder disabled\n"); |
| |
| sde_rm_release(&sde_kms->rm, drm_enc); |
| } |
| |
| static enum sde_intf sde_encoder_get_intf(struct sde_mdss_cfg *catalog, |
| enum sde_intf_type type, u32 controller_id) |
| { |
| int i = 0; |
| |
| for (i = 0; i < catalog->intf_count; i++) { |
| if (catalog->intf[i].type == type |
| && catalog->intf[i].controller_id == controller_id) { |
| return catalog->intf[i].id; |
| } |
| } |
| |
| return INTF_MAX; |
| } |
| |
| static enum sde_wb sde_encoder_get_wb(struct sde_mdss_cfg *catalog, |
| enum sde_intf_type type, u32 controller_id) |
| { |
| if (controller_id < catalog->wb_count) |
| return catalog->wb[controller_id].id; |
| |
| return WB_MAX; |
| } |
| |
| static void sde_encoder_vblank_callback(struct drm_encoder *drm_enc, |
| struct sde_encoder_phys *phy_enc) |
| { |
| struct sde_encoder_virt *sde_enc = NULL; |
| unsigned long lock_flags; |
| |
| if (!drm_enc || !phy_enc) |
| return; |
| |
| SDE_ATRACE_BEGIN("encoder_vblank_callback"); |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| |
| spin_lock_irqsave(&sde_enc->enc_spinlock, lock_flags); |
| if (sde_enc->crtc_vblank_cb) |
| sde_enc->crtc_vblank_cb(sde_enc->crtc_vblank_cb_data); |
| spin_unlock_irqrestore(&sde_enc->enc_spinlock, lock_flags); |
| |
| atomic_inc(&phy_enc->vsync_cnt); |
| SDE_ATRACE_END("encoder_vblank_callback"); |
| } |
| |
| static void sde_encoder_underrun_callback(struct drm_encoder *drm_enc, |
| struct sde_encoder_phys *phy_enc) |
| { |
| if (!phy_enc) |
| return; |
| |
| SDE_ATRACE_BEGIN("encoder_underrun_callback"); |
| atomic_inc(&phy_enc->underrun_cnt); |
| SDE_EVT32(DRMID(drm_enc), atomic_read(&phy_enc->underrun_cnt)); |
| |
| trace_sde_encoder_underrun(DRMID(drm_enc), |
| atomic_read(&phy_enc->underrun_cnt)); |
| |
| SDE_DBG_CTRL("stop_ftrace"); |
| SDE_DBG_CTRL("panic_underrun"); |
| |
| SDE_ATRACE_END("encoder_underrun_callback"); |
| } |
| |
| void sde_encoder_register_vblank_callback(struct drm_encoder *drm_enc, |
| void (*vbl_cb)(void *), void *vbl_data) |
| { |
| struct sde_encoder_virt *sde_enc = to_sde_encoder_virt(drm_enc); |
| unsigned long lock_flags; |
| bool enable; |
| int i; |
| |
| enable = vbl_cb ? true : false; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| SDE_EVT32(DRMID(drm_enc), enable); |
| |
| spin_lock_irqsave(&sde_enc->enc_spinlock, lock_flags); |
| sde_enc->crtc_vblank_cb = vbl_cb; |
| sde_enc->crtc_vblank_cb_data = vbl_data; |
| spin_unlock_irqrestore(&sde_enc->enc_spinlock, lock_flags); |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys && phys->ops.control_vblank_irq) |
| phys->ops.control_vblank_irq(phys, enable); |
| } |
| sde_enc->vblank_enabled = enable; |
| } |
| |
| void sde_encoder_register_frame_event_callback(struct drm_encoder *drm_enc, |
| void (*frame_event_cb)(void *, u32 event), |
| struct drm_crtc *crtc) |
| { |
| struct sde_encoder_virt *sde_enc = to_sde_encoder_virt(drm_enc); |
| unsigned long lock_flags; |
| bool enable; |
| |
| enable = frame_event_cb ? true : false; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| SDE_EVT32(DRMID(drm_enc), enable, 0); |
| |
| spin_lock_irqsave(&sde_enc->enc_spinlock, lock_flags); |
| sde_enc->crtc_frame_event_cb = frame_event_cb; |
| sde_enc->crtc_frame_event_cb_data.crtc = crtc; |
| spin_unlock_irqrestore(&sde_enc->enc_spinlock, lock_flags); |
| } |
| |
| static void sde_encoder_frame_done_callback( |
| struct drm_encoder *drm_enc, |
| struct sde_encoder_phys *ready_phys, u32 event) |
| { |
| struct sde_encoder_virt *sde_enc = to_sde_encoder_virt(drm_enc); |
| unsigned int i; |
| |
| sde_enc->crtc_frame_event_cb_data.connector = |
| sde_enc->cur_master->connector; |
| |
| if (event & (SDE_ENCODER_FRAME_EVENT_DONE |
| | SDE_ENCODER_FRAME_EVENT_ERROR |
| | SDE_ENCODER_FRAME_EVENT_PANEL_DEAD)) { |
| |
| if (!sde_enc->frame_busy_mask[0]) { |
| /** |
| * suppress frame_done without waiter, |
| * likely autorefresh |
| */ |
| SDE_EVT32(DRMID(drm_enc), event, ready_phys->intf_idx); |
| return; |
| } |
| |
| /* One of the physical encoders has become idle */ |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| if (sde_enc->phys_encs[i] == ready_phys) { |
| clear_bit(i, sde_enc->frame_busy_mask); |
| SDE_EVT32_VERBOSE(DRMID(drm_enc), i, |
| sde_enc->frame_busy_mask[0]); |
| } |
| } |
| |
| if (!sde_enc->frame_busy_mask[0]) { |
| sde_encoder_resource_control(drm_enc, |
| SDE_ENC_RC_EVENT_FRAME_DONE); |
| |
| if (sde_enc->crtc_frame_event_cb) |
| sde_enc->crtc_frame_event_cb( |
| &sde_enc->crtc_frame_event_cb_data, |
| event); |
| } |
| } else { |
| if (sde_enc->crtc_frame_event_cb) |
| sde_enc->crtc_frame_event_cb( |
| &sde_enc->crtc_frame_event_cb_data, event); |
| } |
| } |
| |
| int sde_encoder_idle_request(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid drm encoder\n"); |
| return -EINVAL; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| sde_encoder_resource_control(&sde_enc->base, |
| SDE_ENC_RC_EVENT_ENTER_IDLE); |
| |
| return 0; |
| } |
| |
| /** |
| * _sde_encoder_trigger_flush - trigger flush for a physical encoder |
| * drm_enc: Pointer to drm encoder structure |
| * phys: Pointer to physical encoder structure |
| * extra_flush_bits: Additional bit mask to include in flush trigger |
| */ |
| static inline void _sde_encoder_trigger_flush(struct drm_encoder *drm_enc, |
| struct sde_encoder_phys *phys, uint32_t extra_flush_bits) |
| { |
| struct sde_hw_ctl *ctl; |
| int pending_kickoff_cnt; |
| |
| if (!drm_enc || !phys) { |
| SDE_ERROR("invalid argument(s), drm_enc %d, phys_enc %d\n", |
| drm_enc != 0, phys != 0); |
| return; |
| } |
| |
| if (!phys->hw_pp) { |
| SDE_ERROR("invalid pingpong hw\n"); |
| return; |
| } |
| |
| ctl = phys->hw_ctl; |
| if (!ctl || !phys->ops.trigger_flush) { |
| SDE_ERROR("missing ctl/trigger cb\n"); |
| return; |
| } |
| |
| if (phys->split_role == ENC_ROLE_SKIP) { |
| SDE_DEBUG_ENC(to_sde_encoder_virt(phys->parent), |
| "skip flush pp%d ctl%d\n", |
| phys->hw_pp->idx - PINGPONG_0, |
| ctl->idx - CTL_0); |
| return; |
| } |
| |
| pending_kickoff_cnt = sde_encoder_phys_inc_pending(phys); |
| |
| if (phys->ops.is_master && phys->ops.is_master(phys)) |
| atomic_inc(&phys->pending_retire_fence_cnt); |
| |
| if (extra_flush_bits && ctl->ops.update_pending_flush) |
| ctl->ops.update_pending_flush(ctl, extra_flush_bits); |
| |
| phys->ops.trigger_flush(phys); |
| |
| if (ctl->ops.get_pending_flush) |
| SDE_EVT32(DRMID(drm_enc), phys->intf_idx - INTF_0, |
| pending_kickoff_cnt, ctl->idx - CTL_0, |
| ctl->ops.get_pending_flush(ctl)); |
| else |
| SDE_EVT32(DRMID(drm_enc), phys->intf_idx - INTF_0, |
| ctl->idx - CTL_0, pending_kickoff_cnt); |
| } |
| |
| /** |
| * _sde_encoder_trigger_start - trigger start for a physical encoder |
| * phys: Pointer to physical encoder structure |
| */ |
| static inline void _sde_encoder_trigger_start(struct sde_encoder_phys *phys) |
| { |
| struct sde_hw_ctl *ctl; |
| |
| if (!phys) { |
| SDE_ERROR("invalid argument(s)\n"); |
| return; |
| } |
| |
| if (!phys->hw_pp) { |
| SDE_ERROR("invalid pingpong hw\n"); |
| return; |
| } |
| |
| /* avoid ctrl start for encoder in clone mode */ |
| if (phys->in_clone_mode) |
| return; |
| |
| ctl = phys->hw_ctl; |
| if (phys->split_role == ENC_ROLE_SKIP) { |
| SDE_DEBUG_ENC(to_sde_encoder_virt(phys->parent), |
| "skip start pp%d ctl%d\n", |
| phys->hw_pp->idx - PINGPONG_0, |
| ctl->idx - CTL_0); |
| return; |
| } |
| if (phys->ops.trigger_start && phys->enable_state != SDE_ENC_DISABLED) |
| phys->ops.trigger_start(phys); |
| } |
| |
| void sde_encoder_helper_trigger_flush(struct sde_encoder_phys *phys_enc) |
| { |
| struct sde_hw_ctl *ctl; |
| |
| if (!phys_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| |
| ctl = phys_enc->hw_ctl; |
| if (ctl && ctl->ops.trigger_flush) |
| ctl->ops.trigger_flush(ctl); |
| } |
| |
| void sde_encoder_helper_trigger_start(struct sde_encoder_phys *phys_enc) |
| { |
| struct sde_hw_ctl *ctl; |
| |
| if (!phys_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| |
| ctl = phys_enc->hw_ctl; |
| if (ctl && ctl->ops.trigger_start) { |
| ctl->ops.trigger_start(ctl); |
| SDE_EVT32(DRMID(phys_enc->parent), ctl->idx - CTL_0); |
| } |
| } |
| |
| static int _sde_encoder_wait_timeout(int32_t drm_id, int32_t hw_id, |
| s64 timeout_ms, struct sde_encoder_wait_info *info) |
| { |
| int rc = 0; |
| s64 wait_time_jiffies = msecs_to_jiffies(timeout_ms); |
| ktime_t cur_ktime; |
| ktime_t exp_ktime = ktime_add_ms(ktime_get(), timeout_ms); |
| |
| do { |
| rc = wait_event_timeout(*(info->wq), |
| atomic_read(info->atomic_cnt) == 0, wait_time_jiffies); |
| cur_ktime = ktime_get(); |
| |
| SDE_EVT32(drm_id, hw_id, rc, ktime_to_ms(cur_ktime), |
| timeout_ms, atomic_read(info->atomic_cnt)); |
| /* If we timed out, counter is valid and time is less, wait again */ |
| } while (atomic_read(info->atomic_cnt) && (rc == 0) && |
| (ktime_compare_safe(exp_ktime, cur_ktime) > 0)); |
| |
| return rc; |
| } |
| |
| int sde_encoder_helper_wait_event_timeout(int32_t drm_id, int32_t hw_id, |
| struct sde_encoder_wait_info *info) |
| { |
| int rc; |
| ktime_t exp_ktime = ktime_add_ms(ktime_get(), info->timeout_ms); |
| |
| rc = _sde_encoder_wait_timeout(drm_id, hw_id, info->timeout_ms, info); |
| |
| /** |
| * handle disabled irq case where timer irq is also delayed. |
| * wait for additional timeout of FAULT_TOLERENCE_WAIT_IN_MS |
| * if it event_timeout expired late detected. |
| */ |
| if (atomic_read(info->atomic_cnt) && (!rc) && |
| (ktime_compare_safe(ktime_get(), ktime_add_ms(exp_ktime, |
| FAULT_TOLERENCE_DELTA_IN_MS)) > 0)) |
| rc = _sde_encoder_wait_timeout(drm_id, hw_id, |
| FAULT_TOLERENCE_WAIT_IN_MS, info); |
| |
| return rc; |
| } |
| |
| void sde_encoder_helper_hw_reset(struct sde_encoder_phys *phys_enc) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct sde_connector *sde_con; |
| void *sde_con_disp; |
| struct sde_hw_ctl *ctl; |
| int rc; |
| |
| if (!phys_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| sde_enc = to_sde_encoder_virt(phys_enc->parent); |
| ctl = phys_enc->hw_ctl; |
| |
| if (!ctl || !ctl->ops.reset) |
| return; |
| |
| SDE_DEBUG_ENC(sde_enc, "ctl %d reset\n", ctl->idx); |
| SDE_EVT32(DRMID(phys_enc->parent), ctl->idx); |
| |
| if (phys_enc->ops.is_master && phys_enc->ops.is_master(phys_enc) && |
| phys_enc->connector) { |
| sde_con = to_sde_connector(phys_enc->connector); |
| sde_con_disp = sde_connector_get_display(phys_enc->connector); |
| |
| if (sde_con->ops.soft_reset) { |
| rc = sde_con->ops.soft_reset(sde_con_disp); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, |
| "connector soft reset failure\n"); |
| SDE_DBG_DUMP("all", "dbg_bus", "vbif_dbg_bus", |
| "panic"); |
| } |
| } |
| } |
| |
| phys_enc->enable_state = SDE_ENC_ENABLED; |
| } |
| |
| /** |
| * _sde_encoder_kickoff_phys - handle physical encoder kickoff |
| * Iterate through the physical encoders and perform consolidated flush |
| * and/or control start triggering as needed. This is done in the virtual |
| * encoder rather than the individual physical ones in order to handle |
| * use cases that require visibility into multiple physical encoders at |
| * a time. |
| * sde_enc: Pointer to virtual encoder structure |
| */ |
| static void _sde_encoder_kickoff_phys(struct sde_encoder_virt *sde_enc) |
| { |
| struct sde_hw_ctl *ctl; |
| uint32_t i, pending_flush; |
| unsigned long lock_flags; |
| struct msm_drm_private *priv = NULL; |
| struct sde_kms *sde_kms = NULL; |
| bool is_vid_mode = false; |
| |
| if (!sde_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| |
| is_vid_mode = sde_enc->disp_info.capabilities & |
| MSM_DISPLAY_CAP_VID_MODE; |
| |
| |
| pending_flush = 0x0; |
| |
| /* |
| * Trigger LUT DMA flush, this might need a wait, so we need |
| * to do this outside of the atomic context |
| */ |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (!phys || phys->enable_state == SDE_ENC_DISABLED) |
| continue; |
| |
| ctl = phys->hw_ctl; |
| if (!ctl) |
| continue; |
| |
| /* make reg dma kickoff as blocking for vidoe-mode */ |
| if (phys->hw_ctl->ops.reg_dma_flush) |
| phys->hw_ctl->ops.reg_dma_flush(phys->hw_ctl, |
| is_vid_mode); |
| } |
| |
| /* update pending counts and trigger kickoff ctl flush atomically */ |
| spin_lock_irqsave(&sde_enc->enc_spinlock, lock_flags); |
| |
| /* don't perform flush/start operations for slave encoders */ |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| enum sde_rm_topology_name topology = SDE_RM_TOPOLOGY_NONE; |
| |
| if (!phys || phys->enable_state == SDE_ENC_DISABLED) |
| continue; |
| |
| ctl = phys->hw_ctl; |
| if (!ctl) |
| continue; |
| |
| if (phys->connector) |
| topology = sde_connector_get_topology_name( |
| phys->connector); |
| |
| /* |
| * don't wait on ppsplit slaves or skipped encoders because |
| * they dont receive irqs |
| */ |
| if (!(topology == SDE_RM_TOPOLOGY_PPSPLIT && |
| phys->split_role == ENC_ROLE_SLAVE) && |
| phys->split_role != ENC_ROLE_SKIP) |
| set_bit(i, sde_enc->frame_busy_mask); |
| |
| if (!phys->ops.needs_single_flush || |
| !phys->ops.needs_single_flush(phys)) |
| _sde_encoder_trigger_flush(&sde_enc->base, phys, 0x0); |
| else if (ctl->ops.get_pending_flush) |
| pending_flush |= ctl->ops.get_pending_flush(ctl); |
| } |
| |
| /* for split flush, combine pending flush masks and send to master */ |
| if (pending_flush && sde_enc->cur_master) { |
| _sde_encoder_trigger_flush( |
| &sde_enc->base, |
| sde_enc->cur_master, |
| pending_flush); |
| } |
| |
| _sde_encoder_trigger_start(sde_enc->cur_master); |
| |
| spin_unlock_irqrestore(&sde_enc->enc_spinlock, lock_flags); |
| |
| if (sde_enc->elevated_ahb_vote) { |
| priv = sde_enc->base.dev->dev_private; |
| if (priv != NULL) { |
| sde_kms = to_sde_kms(priv->kms); |
| if (sde_kms != NULL) { |
| sde_power_scale_reg_bus(&priv->phandle, |
| sde_kms->core_client, |
| VOTE_INDEX_LOW, |
| false); |
| } |
| } |
| sde_enc->elevated_ahb_vote = false; |
| } |
| } |
| |
| static void _sde_encoder_ppsplit_swap_intf_for_right_only_update( |
| struct drm_encoder *drm_enc, |
| unsigned long *affected_displays, |
| int num_active_phys) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct sde_encoder_phys *master; |
| enum sde_rm_topology_name topology; |
| bool is_right_only; |
| |
| if (!drm_enc || !affected_displays) |
| return; |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| master = sde_enc->cur_master; |
| if (!master || !master->connector) |
| return; |
| |
| topology = sde_connector_get_topology_name(master->connector); |
| if (topology != SDE_RM_TOPOLOGY_PPSPLIT) |
| return; |
| |
| /* |
| * For pingpong split, the slave pingpong won't generate IRQs. For |
| * right-only updates, we can't swap pingpongs, or simply swap the |
| * master/slave assignment, we actually have to swap the interfaces |
| * so that the master physical encoder will use a pingpong/interface |
| * that generates irqs on which to wait. |
| */ |
| is_right_only = !test_bit(0, affected_displays) && |
| test_bit(1, affected_displays); |
| |
| if (is_right_only && !sde_enc->intfs_swapped) { |
| /* right-only update swap interfaces */ |
| swap(sde_enc->phys_encs[0]->intf_idx, |
| sde_enc->phys_encs[1]->intf_idx); |
| sde_enc->intfs_swapped = true; |
| } else if (!is_right_only && sde_enc->intfs_swapped) { |
| /* left-only or full update, swap back */ |
| swap(sde_enc->phys_encs[0]->intf_idx, |
| sde_enc->phys_encs[1]->intf_idx); |
| sde_enc->intfs_swapped = false; |
| } |
| |
| SDE_DEBUG_ENC(sde_enc, |
| "right_only %d swapped %d phys0->intf%d, phys1->intf%d\n", |
| is_right_only, sde_enc->intfs_swapped, |
| sde_enc->phys_encs[0]->intf_idx - INTF_0, |
| sde_enc->phys_encs[1]->intf_idx - INTF_0); |
| SDE_EVT32(DRMID(drm_enc), is_right_only, sde_enc->intfs_swapped, |
| sde_enc->phys_encs[0]->intf_idx - INTF_0, |
| sde_enc->phys_encs[1]->intf_idx - INTF_0, |
| *affected_displays); |
| |
| /* ppsplit always uses master since ppslave invalid for irqs*/ |
| if (num_active_phys == 1) |
| *affected_displays = BIT(0); |
| } |
| |
| static void _sde_encoder_update_master(struct drm_encoder *drm_enc, |
| struct sde_encoder_kickoff_params *params) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct sde_encoder_phys *phys; |
| int i, num_active_phys; |
| bool master_assigned = false; |
| |
| if (!drm_enc || !params) |
| return; |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| |
| if (sde_enc->num_phys_encs <= 1) |
| return; |
| |
| /* count bits set */ |
| num_active_phys = hweight_long(params->affected_displays); |
| |
| SDE_DEBUG_ENC(sde_enc, "affected_displays 0x%lx num_active_phys %d\n", |
| params->affected_displays, num_active_phys); |
| SDE_EVT32_VERBOSE(DRMID(drm_enc), params->affected_displays, |
| num_active_phys); |
| |
| /* for left/right only update, ppsplit master switches interface */ |
| _sde_encoder_ppsplit_swap_intf_for_right_only_update(drm_enc, |
| ¶ms->affected_displays, num_active_phys); |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| enum sde_enc_split_role prv_role, new_role; |
| bool active; |
| |
| phys = sde_enc->phys_encs[i]; |
| if (!phys || !phys->ops.update_split_role || !phys->hw_pp) |
| continue; |
| |
| active = test_bit(i, ¶ms->affected_displays); |
| prv_role = phys->split_role; |
| |
| if (active && num_active_phys == 1) |
| new_role = ENC_ROLE_SOLO; |
| else if (active && !master_assigned) |
| new_role = ENC_ROLE_MASTER; |
| else if (active) |
| new_role = ENC_ROLE_SLAVE; |
| else |
| new_role = ENC_ROLE_SKIP; |
| |
| phys->ops.update_split_role(phys, new_role); |
| if (new_role == ENC_ROLE_SOLO || new_role == ENC_ROLE_MASTER) { |
| sde_enc->cur_master = phys; |
| master_assigned = true; |
| } |
| |
| SDE_DEBUG_ENC(sde_enc, "pp %d role prv %d new %d active %d\n", |
| phys->hw_pp->idx - PINGPONG_0, prv_role, |
| phys->split_role, active); |
| SDE_EVT32(DRMID(drm_enc), params->affected_displays, |
| phys->hw_pp->idx - PINGPONG_0, prv_role, |
| phys->split_role, active, num_active_phys); |
| } |
| } |
| |
| bool sde_encoder_check_mode(struct drm_encoder *drm_enc, u32 mode) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct msm_display_info *disp_info; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return false; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| disp_info = &sde_enc->disp_info; |
| |
| return (disp_info->capabilities & mode); |
| } |
| |
| void sde_encoder_trigger_kickoff_pending(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct sde_encoder_phys *phys; |
| unsigned int i; |
| struct sde_hw_ctl *ctl; |
| struct msm_display_info *disp_info; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| disp_info = &sde_enc->disp_info; |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| phys = sde_enc->phys_encs[i]; |
| |
| if (phys && phys->hw_ctl) { |
| ctl = phys->hw_ctl; |
| if (ctl->ops.clear_pending_flush) |
| ctl->ops.clear_pending_flush(ctl); |
| |
| /* update only for command mode primary ctl */ |
| if ((phys == sde_enc->cur_master) && |
| (disp_info->capabilities & MSM_DISPLAY_CAP_CMD_MODE) |
| && ctl->ops.trigger_pending) |
| ctl->ops.trigger_pending(ctl); |
| } |
| } |
| } |
| |
| static void _sde_encoder_setup_dither(struct sde_encoder_phys *phys) |
| { |
| void *dither_cfg; |
| int ret = 0, rc, i = 0; |
| size_t len = 0; |
| enum sde_rm_topology_name topology; |
| struct drm_encoder *drm_enc; |
| struct msm_mode_info mode_info; |
| struct msm_display_dsc_info *dsc = NULL; |
| struct sde_encoder_virt *sde_enc; |
| struct sde_hw_pingpong *hw_pp; |
| |
| if (!phys || !phys->connector || !phys->hw_pp || |
| !phys->hw_pp->ops.setup_dither || !phys->parent) |
| return; |
| |
| topology = sde_connector_get_topology_name(phys->connector); |
| if ((topology == SDE_RM_TOPOLOGY_PPSPLIT) && |
| (phys->split_role == ENC_ROLE_SLAVE)) |
| return; |
| |
| drm_enc = phys->parent; |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| rc = _sde_encoder_get_mode_info(&sde_enc->base, &mode_info); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, "failed to get mode info\n"); |
| return; |
| } |
| |
| dsc = &mode_info.comp_info.dsc_info; |
| /* disable dither for 10 bpp or 10bpc dsc config */ |
| if (dsc->bpp == 10 || dsc->bpc == 10) { |
| phys->hw_pp->ops.setup_dither(phys->hw_pp, NULL, 0); |
| return; |
| } |
| |
| ret = sde_connector_get_dither_cfg(phys->connector, |
| phys->connector->state, &dither_cfg, &len); |
| if (ret) |
| return; |
| |
| if (TOPOLOGY_DUALPIPE_MERGE_MODE(topology)) { |
| for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { |
| hw_pp = sde_enc->hw_pp[i]; |
| if (hw_pp) { |
| phys->hw_pp->ops.setup_dither(hw_pp, dither_cfg, |
| len); |
| } |
| } |
| } else { |
| phys->hw_pp->ops.setup_dither(phys->hw_pp, dither_cfg, len); |
| } |
| } |
| |
| static u32 _sde_encoder_calculate_linetime(struct sde_encoder_virt *sde_enc, |
| struct drm_display_mode *mode) |
| { |
| u64 pclk_rate; |
| u32 pclk_period; |
| u32 line_time; |
| |
| /* |
| * For linetime calculation, only operate on master encoder. |
| */ |
| if (!sde_enc->cur_master) |
| return 0; |
| |
| if (!sde_enc->cur_master->ops.get_line_count) { |
| SDE_ERROR("get_line_count function not defined\n"); |
| return 0; |
| } |
| |
| pclk_rate = mode->clock; /* pixel clock in kHz */ |
| if (pclk_rate == 0) { |
| SDE_ERROR("pclk is 0, cannot calculate line time\n"); |
| return 0; |
| } |
| |
| pclk_period = DIV_ROUND_UP_ULL(1000000000ull, pclk_rate); |
| if (pclk_period == 0) { |
| SDE_ERROR("pclk period is 0\n"); |
| return 0; |
| } |
| |
| /* |
| * Line time calculation based on Pixel clock and HTOTAL. |
| * Final unit is in ns. |
| */ |
| line_time = (pclk_period * mode->htotal) / 1000; |
| if (line_time == 0) { |
| SDE_ERROR("line time calculation is 0\n"); |
| return 0; |
| } |
| |
| SDE_DEBUG_ENC(sde_enc, |
| "clk_rate=%lldkHz, clk_period=%d, linetime=%dns\n", |
| pclk_rate, pclk_period, line_time); |
| |
| return line_time; |
| } |
| |
| static int _sde_encoder_wakeup_time(struct drm_encoder *drm_enc, |
| ktime_t *wakeup_time) |
| { |
| struct drm_display_mode *mode; |
| struct sde_encoder_virt *sde_enc; |
| u32 cur_line; |
| u32 line_time; |
| u32 vtotal, time_to_vsync; |
| ktime_t cur_time; |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| mode = &sde_enc->cur_master->cached_mode; |
| |
| line_time = _sde_encoder_calculate_linetime(sde_enc, mode); |
| if (!line_time) |
| return -EINVAL; |
| |
| cur_line = sde_enc->cur_master->ops.get_line_count(sde_enc->cur_master); |
| |
| vtotal = mode->vtotal; |
| if (cur_line >= vtotal) |
| time_to_vsync = line_time * vtotal; |
| else |
| time_to_vsync = line_time * (vtotal - cur_line); |
| |
| if (time_to_vsync == 0) { |
| SDE_ERROR("time to vsync should not be zero, vtotal=%d\n", |
| vtotal); |
| return -EINVAL; |
| } |
| |
| cur_time = ktime_get(); |
| *wakeup_time = ktime_add_ns(cur_time, time_to_vsync); |
| |
| SDE_DEBUG_ENC(sde_enc, |
| "cur_line=%u vtotal=%u time_to_vsync=%u, cur_time=%lld, wakeup_time=%lld\n", |
| cur_line, vtotal, time_to_vsync, |
| ktime_to_ms(cur_time), |
| ktime_to_ms(*wakeup_time)); |
| return 0; |
| } |
| |
| static void sde_encoder_vsync_event_handler(unsigned long data) |
| { |
| struct drm_encoder *drm_enc = (struct drm_encoder *) data; |
| struct sde_encoder_virt *sde_enc; |
| struct msm_drm_private *priv; |
| struct msm_drm_thread *event_thread; |
| |
| if (!drm_enc || !drm_enc->dev || !drm_enc->dev->dev_private) { |
| SDE_ERROR("invalid encoder parameters\n"); |
| return; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| priv = drm_enc->dev->dev_private; |
| if (!sde_enc->crtc) { |
| SDE_ERROR("invalid crtc"); |
| return; |
| } |
| |
| if (sde_enc->crtc->index >= ARRAY_SIZE(priv->event_thread)) { |
| SDE_ERROR("invalid crtc index:%u\n", |
| sde_enc->crtc->index); |
| return; |
| } |
| event_thread = &priv->event_thread[sde_enc->crtc->index]; |
| if (!event_thread) { |
| SDE_ERROR("event_thread not found for crtc:%d\n", |
| sde_enc->crtc->index); |
| return; |
| } |
| |
| kthread_queue_work(&event_thread->worker, |
| &sde_enc->vsync_event_work); |
| } |
| |
| static void sde_encoder_esd_trigger_work_handler(struct kthread_work *work) |
| { |
| struct sde_encoder_virt *sde_enc = container_of(work, |
| struct sde_encoder_virt, esd_trigger_work); |
| |
| if (!sde_enc) { |
| SDE_ERROR("invalid sde encoder\n"); |
| return; |
| } |
| |
| sde_encoder_resource_control(&sde_enc->base, |
| SDE_ENC_RC_EVENT_KICKOFF); |
| } |
| |
| static void sde_encoder_input_event_work_handler(struct kthread_work *work) |
| { |
| struct sde_encoder_virt *sde_enc = container_of(work, |
| struct sde_encoder_virt, input_event_work); |
| |
| if (!sde_enc) { |
| SDE_ERROR("invalid sde encoder\n"); |
| return; |
| } |
| |
| sde_encoder_resource_control(&sde_enc->base, |
| SDE_ENC_RC_EVENT_EARLY_WAKEUP); |
| } |
| |
| static void sde_encoder_vsync_event_work_handler(struct kthread_work *work) |
| { |
| struct sde_encoder_virt *sde_enc = container_of(work, |
| struct sde_encoder_virt, vsync_event_work); |
| bool autorefresh_enabled = false; |
| int rc = 0; |
| ktime_t wakeup_time; |
| |
| if (!sde_enc) { |
| SDE_ERROR("invalid sde encoder\n"); |
| return; |
| } |
| |
| rc = _sde_encoder_power_enable(sde_enc, true); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, "sde enc power enabled failed:%d\n", rc); |
| return; |
| } |
| |
| if (sde_enc->cur_master && |
| sde_enc->cur_master->ops.is_autorefresh_enabled) |
| autorefresh_enabled = |
| sde_enc->cur_master->ops.is_autorefresh_enabled( |
| sde_enc->cur_master); |
| |
| /* Update timer if autorefresh is enabled else return */ |
| if (!autorefresh_enabled) |
| goto exit; |
| |
| rc = _sde_encoder_wakeup_time(&sde_enc->base, &wakeup_time); |
| if (rc) |
| goto exit; |
| |
| SDE_EVT32_VERBOSE(ktime_to_ms(wakeup_time)); |
| mod_timer(&sde_enc->vsync_event_timer, |
| nsecs_to_jiffies(ktime_to_ns(wakeup_time))); |
| |
| exit: |
| _sde_encoder_power_enable(sde_enc, false); |
| } |
| |
| int sde_encoder_poll_line_counts(struct drm_encoder *drm_enc) |
| { |
| static const uint64_t timeout_us = 50000; |
| static const uint64_t sleep_us = 20; |
| struct sde_encoder_virt *sde_enc; |
| ktime_t cur_ktime, exp_ktime; |
| uint32_t line_count, tmp, i; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return -EINVAL; |
| } |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| if (!sde_enc->cur_master || |
| !sde_enc->cur_master->ops.get_line_count) { |
| SDE_DEBUG_ENC(sde_enc, "can't get master line count\n"); |
| SDE_EVT32(DRMID(drm_enc), SDE_EVTLOG_ERROR); |
| return -EINVAL; |
| } |
| |
| exp_ktime = ktime_add_ms(ktime_get(), timeout_us / 1000); |
| |
| line_count = sde_enc->cur_master->ops.get_line_count( |
| sde_enc->cur_master); |
| |
| for (i = 0; i < (timeout_us * 2 / sleep_us); ++i) { |
| tmp = line_count; |
| line_count = sde_enc->cur_master->ops.get_line_count( |
| sde_enc->cur_master); |
| if (line_count < tmp) { |
| SDE_EVT32(DRMID(drm_enc), line_count); |
| return 0; |
| } |
| |
| cur_ktime = ktime_get(); |
| if (ktime_compare_safe(exp_ktime, cur_ktime) <= 0) |
| break; |
| |
| usleep_range(sleep_us / 2, sleep_us); |
| } |
| |
| SDE_EVT32(DRMID(drm_enc), line_count, SDE_EVTLOG_ERROR); |
| return -ETIMEDOUT; |
| } |
| |
| int sde_encoder_prepare_for_kickoff(struct drm_encoder *drm_enc, |
| struct sde_encoder_kickoff_params *params) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct sde_encoder_phys *phys; |
| struct sde_kms *sde_kms = NULL; |
| struct msm_drm_private *priv = NULL; |
| bool needs_hw_reset = false; |
| uint32_t ln_cnt1, ln_cnt2; |
| unsigned int i; |
| int rc, ret = 0; |
| |
| if (!drm_enc || !params || !drm_enc->dev || |
| !drm_enc->dev->dev_private) { |
| SDE_ERROR("invalid args\n"); |
| return -EINVAL; |
| } |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| priv = drm_enc->dev->dev_private; |
| sde_kms = to_sde_kms(priv->kms); |
| |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| SDE_EVT32(DRMID(drm_enc)); |
| |
| /* save this for later, in case of errors */ |
| if (sde_enc->cur_master && sde_enc->cur_master->ops.get_wr_line_count) |
| ln_cnt1 = sde_enc->cur_master->ops.get_wr_line_count( |
| sde_enc->cur_master); |
| else |
| ln_cnt1 = -EINVAL; |
| |
| /* prepare for next kickoff, may include waiting on previous kickoff */ |
| SDE_ATRACE_BEGIN("enc_prepare_for_kickoff"); |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| phys = sde_enc->phys_encs[i]; |
| params->is_primary = sde_enc->disp_info.is_primary; |
| if (phys) { |
| if (phys->ops.prepare_for_kickoff) { |
| rc = phys->ops.prepare_for_kickoff( |
| phys, params); |
| if (rc) |
| ret = rc; |
| } |
| if (phys->enable_state == SDE_ENC_ERR_NEEDS_HW_RESET) |
| needs_hw_reset = true; |
| _sde_encoder_setup_dither(phys); |
| } |
| } |
| SDE_ATRACE_END("enc_prepare_for_kickoff"); |
| |
| rc = sde_encoder_resource_control(drm_enc, SDE_ENC_RC_EVENT_KICKOFF); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, "resource kickoff failed rc %d\n", rc); |
| return rc; |
| } |
| |
| /* if any phys needs reset, reset all phys, in-order */ |
| if (needs_hw_reset) { |
| /* query line count before cur_master is updated */ |
| if (sde_enc->cur_master && |
| sde_enc->cur_master->ops.get_wr_line_count) |
| ln_cnt2 = sde_enc->cur_master->ops.get_wr_line_count( |
| sde_enc->cur_master); |
| else |
| ln_cnt2 = -EINVAL; |
| |
| SDE_EVT32(DRMID(drm_enc), ln_cnt1, ln_cnt2, |
| SDE_EVTLOG_FUNC_CASE1); |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| phys = sde_enc->phys_encs[i]; |
| if (phys && phys->ops.hw_reset) |
| phys->ops.hw_reset(phys); |
| } |
| } |
| |
| _sde_encoder_update_master(drm_enc, params); |
| |
| _sde_encoder_update_roi(drm_enc); |
| |
| if (sde_enc->cur_master && sde_enc->cur_master->connector) { |
| rc = sde_connector_pre_kickoff(sde_enc->cur_master->connector); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, "kickoff conn%d failed rc %d\n", |
| sde_enc->cur_master->connector->base.id, |
| rc); |
| ret = rc; |
| } |
| } |
| |
| if (_sde_encoder_is_dsc_enabled(drm_enc) && |
| !sde_kms->splash_data.cont_splash_en) { |
| rc = _sde_encoder_dsc_setup(sde_enc, params); |
| if (rc) { |
| SDE_ERROR_ENC(sde_enc, "failed to setup DSC: %d\n", rc); |
| ret = rc; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * _sde_encoder_reset_ctl_hw - reset h/w configuration for all ctl's associated |
| * with the specified encoder, and unstage all pipes from it |
| * @encoder: encoder pointer |
| * Returns: 0 on success |
| */ |
| static int _sde_encoder_reset_ctl_hw(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct sde_encoder_phys *phys; |
| unsigned int i; |
| int rc = 0; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return -EINVAL; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| |
| SDE_ATRACE_BEGIN("encoder_release_lm"); |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| phys = sde_enc->phys_encs[i]; |
| if (!phys) |
| continue; |
| |
| SDE_EVT32(DRMID(drm_enc), phys->intf_idx - INTF_0); |
| |
| rc = sde_encoder_helper_reset_mixers(phys, NULL); |
| if (rc) |
| SDE_EVT32(DRMID(drm_enc), rc, SDE_EVTLOG_ERROR); |
| } |
| |
| SDE_ATRACE_END("encoder_release_lm"); |
| return rc; |
| } |
| |
| void sde_encoder_kickoff(struct drm_encoder *drm_enc, bool is_error) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct sde_encoder_phys *phys; |
| ktime_t wakeup_time; |
| unsigned int i; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| SDE_ATRACE_BEGIN("encoder_kickoff"); |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| |
| /* create a 'no pipes' commit to release buffers on errors */ |
| if (is_error) |
| _sde_encoder_reset_ctl_hw(drm_enc); |
| |
| /* All phys encs are ready to go, trigger the kickoff */ |
| _sde_encoder_kickoff_phys(sde_enc); |
| |
| /* allow phys encs to handle any post-kickoff business */ |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| phys = sde_enc->phys_encs[i]; |
| if (phys && phys->ops.handle_post_kickoff) |
| phys->ops.handle_post_kickoff(phys); |
| } |
| |
| if (sde_enc->disp_info.intf_type == DRM_MODE_CONNECTOR_DSI && |
| sde_enc->disp_info.is_primary && |
| !_sde_encoder_wakeup_time(drm_enc, &wakeup_time)) { |
| SDE_EVT32_VERBOSE(ktime_to_ms(wakeup_time)); |
| mod_timer(&sde_enc->vsync_event_timer, |
| nsecs_to_jiffies(ktime_to_ns(wakeup_time))); |
| } |
| |
| SDE_ATRACE_END("encoder_kickoff"); |
| } |
| |
| int sde_encoder_helper_reset_mixers(struct sde_encoder_phys *phys_enc, |
| struct drm_framebuffer *fb) |
| { |
| struct drm_encoder *drm_enc; |
| struct sde_hw_mixer_cfg mixer; |
| struct sde_rm_hw_iter lm_iter; |
| bool lm_valid = false; |
| |
| if (!phys_enc || !phys_enc->parent) { |
| SDE_ERROR("invalid encoder\n"); |
| return -EINVAL; |
| } |
| |
| drm_enc = phys_enc->parent; |
| memset(&mixer, 0, sizeof(mixer)); |
| |
| /* reset associated CTL/LMs */ |
| if (phys_enc->hw_ctl->ops.clear_all_blendstages) |
| phys_enc->hw_ctl->ops.clear_all_blendstages(phys_enc->hw_ctl); |
| |
| sde_rm_init_hw_iter(&lm_iter, drm_enc->base.id, SDE_HW_BLK_LM); |
| while (sde_rm_get_hw(&phys_enc->sde_kms->rm, &lm_iter)) { |
| struct sde_hw_mixer *hw_lm = (struct sde_hw_mixer *)lm_iter.hw; |
| |
| if (!hw_lm) |
| continue; |
| |
| /* need to flush LM to remove it */ |
| if (phys_enc->hw_ctl->ops.get_bitmask_mixer && |
| phys_enc->hw_ctl->ops.update_pending_flush) |
| phys_enc->hw_ctl->ops.update_pending_flush( |
| phys_enc->hw_ctl, |
| phys_enc->hw_ctl->ops.get_bitmask_mixer( |
| phys_enc->hw_ctl, hw_lm->idx)); |
| |
| if (fb) { |
| /* assume a single LM if targeting a frame buffer */ |
| if (lm_valid) |
| continue; |
| |
| mixer.out_height = fb->height; |
| mixer.out_width = fb->width; |
| |
| if (hw_lm->ops.setup_mixer_out) |
| hw_lm->ops.setup_mixer_out(hw_lm, &mixer); |
| } |
| |
| lm_valid = true; |
| |
| /* only enable border color on LM */ |
| if (phys_enc->hw_ctl->ops.setup_blendstage) |
| phys_enc->hw_ctl->ops.setup_blendstage( |
| phys_enc->hw_ctl, hw_lm->cfg.flags, |
| hw_lm->idx, NULL); |
| } |
| |
| if (!lm_valid) { |
| SDE_ERROR_ENC(to_sde_encoder_virt(drm_enc), "lm not found\n"); |
| return -EFAULT; |
| } |
| return 0; |
| } |
| |
| void sde_encoder_prepare_commit(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct sde_encoder_phys *phys; |
| int i; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return; |
| } |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| phys = sde_enc->phys_encs[i]; |
| if (phys && phys->ops.prepare_commit) |
| phys->ops.prepare_commit(phys); |
| } |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| static int _sde_encoder_status_show(struct seq_file *s, void *data) |
| { |
| struct sde_encoder_virt *sde_enc; |
| int i; |
| |
| if (!s || !s->private) |
| return -EINVAL; |
| |
| sde_enc = s->private; |
| |
| mutex_lock(&sde_enc->enc_lock); |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (!phys) |
| continue; |
| |
| seq_printf(s, "intf:%d vsync:%8d underrun:%8d ", |
| phys->intf_idx - INTF_0, |
| atomic_read(&phys->vsync_cnt), |
| atomic_read(&phys->underrun_cnt)); |
| |
| switch (phys->intf_mode) { |
| case INTF_MODE_VIDEO: |
| seq_puts(s, "mode: video\n"); |
| break; |
| case INTF_MODE_CMD: |
| seq_puts(s, "mode: command\n"); |
| break; |
| case INTF_MODE_WB_BLOCK: |
| seq_puts(s, "mode: wb block\n"); |
| break; |
| case INTF_MODE_WB_LINE: |
| seq_puts(s, "mode: wb line\n"); |
| break; |
| default: |
| seq_puts(s, "mode: ???\n"); |
| break; |
| } |
| } |
| mutex_unlock(&sde_enc->enc_lock); |
| |
| return 0; |
| } |
| |
| static int _sde_encoder_debugfs_status_open(struct inode *inode, |
| struct file *file) |
| { |
| return single_open(file, _sde_encoder_status_show, inode->i_private); |
| } |
| |
| static ssize_t _sde_encoder_misr_setup(struct file *file, |
| const char __user *user_buf, size_t count, loff_t *ppos) |
| { |
| struct sde_encoder_virt *sde_enc; |
| int i = 0, rc; |
| char buf[MISR_BUFF_SIZE + 1]; |
| size_t buff_copy; |
| u32 frame_count, enable; |
| |
| if (!file || !file->private_data) |
| return -EINVAL; |
| |
| sde_enc = file->private_data; |
| |
| buff_copy = min_t(size_t, count, MISR_BUFF_SIZE); |
| if (copy_from_user(buf, user_buf, buff_copy)) |
| return -EINVAL; |
| |
| buf[buff_copy] = 0; /* end of string */ |
| |
| if (sscanf(buf, "%u %u", &enable, &frame_count) != 2) |
| return -EINVAL; |
| |
| rc = _sde_encoder_power_enable(sde_enc, true); |
| if (rc) |
| return rc; |
| |
| mutex_lock(&sde_enc->enc_lock); |
| sde_enc->misr_enable = enable; |
| sde_enc->misr_frame_count = frame_count; |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (!phys || !phys->ops.setup_misr) |
| continue; |
| |
| phys->ops.setup_misr(phys, enable, frame_count); |
| } |
| mutex_unlock(&sde_enc->enc_lock); |
| _sde_encoder_power_enable(sde_enc, false); |
| |
| return count; |
| } |
| |
| static ssize_t _sde_encoder_misr_read(struct file *file, |
| char __user *user_buff, size_t count, loff_t *ppos) |
| { |
| struct sde_encoder_virt *sde_enc; |
| int i = 0, len = 0; |
| char buf[MISR_BUFF_SIZE + 1] = {'\0'}; |
| int rc; |
| |
| if (*ppos) |
| return 0; |
| |
| if (!file || !file->private_data) |
| return -EINVAL; |
| |
| sde_enc = file->private_data; |
| |
| rc = _sde_encoder_power_enable(sde_enc, true); |
| if (rc) |
| return rc; |
| |
| mutex_lock(&sde_enc->enc_lock); |
| if (!sde_enc->misr_enable) { |
| len += snprintf(buf + len, MISR_BUFF_SIZE - len, |
| "disabled\n"); |
| goto buff_check; |
| } else if (sde_enc->disp_info.capabilities & |
| ~MSM_DISPLAY_CAP_VID_MODE) { |
| len += snprintf(buf + len, MISR_BUFF_SIZE - len, |
| "unsupported\n"); |
| goto buff_check; |
| } |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (!phys || !phys->ops.collect_misr) |
| continue; |
| |
| len += snprintf(buf + len, MISR_BUFF_SIZE - len, |
| "Intf idx:%d\n", phys->intf_idx - INTF_0); |
| len += snprintf(buf + len, MISR_BUFF_SIZE - len, "0x%x\n", |
| phys->ops.collect_misr(phys)); |
| } |
| |
| buff_check: |
| if (count <= len) { |
| len = 0; |
| goto end; |
| } |
| |
| if (copy_to_user(user_buff, buf, len)) { |
| len = -EFAULT; |
| goto end; |
| } |
| |
| *ppos += len; /* increase offset */ |
| |
| end: |
| mutex_unlock(&sde_enc->enc_lock); |
| _sde_encoder_power_enable(sde_enc, false); |
| return len; |
| } |
| |
| static int _sde_encoder_init_debugfs(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| int i; |
| |
| static const struct file_operations debugfs_status_fops = { |
| .open = _sde_encoder_debugfs_status_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static const struct file_operations debugfs_misr_fops = { |
| .open = simple_open, |
| .read = _sde_encoder_misr_read, |
| .write = _sde_encoder_misr_setup, |
| }; |
| |
| char name[SDE_NAME_SIZE]; |
| |
| if (!drm_enc || !drm_enc->dev || !drm_enc->dev->dev_private) { |
| SDE_ERROR("invalid encoder or kms\n"); |
| return -EINVAL; |
| } |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| priv = drm_enc->dev->dev_private; |
| sde_kms = to_sde_kms(priv->kms); |
| |
| snprintf(name, SDE_NAME_SIZE, "encoder%u", drm_enc->base.id); |
| |
| /* create overall sub-directory for the encoder */ |
| sde_enc->debugfs_root = debugfs_create_dir(name, |
| drm_enc->dev->primary->debugfs_root); |
| if (!sde_enc->debugfs_root) |
| return -ENOMEM; |
| |
| /* don't error check these */ |
| debugfs_create_file("status", 0600, |
| sde_enc->debugfs_root, sde_enc, &debugfs_status_fops); |
| |
| debugfs_create_file("misr_data", 0600, |
| sde_enc->debugfs_root, sde_enc, &debugfs_misr_fops); |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) |
| if (sde_enc->phys_encs[i] && |
| sde_enc->phys_encs[i]->ops.late_register) |
| sde_enc->phys_encs[i]->ops.late_register( |
| sde_enc->phys_encs[i], |
| sde_enc->debugfs_root); |
| |
| return 0; |
| } |
| |
| static void _sde_encoder_destroy_debugfs(struct drm_encoder *drm_enc) |
| { |
| struct sde_encoder_virt *sde_enc; |
| |
| if (!drm_enc) |
| return; |
| |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| debugfs_remove_recursive(sde_enc->debugfs_root); |
| } |
| #else |
| static int _sde_encoder_init_debugfs(struct drm_encoder *drm_enc) |
| { |
| return 0; |
| } |
| |
| static void _sde_encoder_destroy_debugfs(struct drm_encoder *drm_enc) |
| { |
| } |
| #endif |
| |
| static int sde_encoder_late_register(struct drm_encoder *encoder) |
| { |
| return _sde_encoder_init_debugfs(encoder); |
| } |
| |
| static void sde_encoder_early_unregister(struct drm_encoder *encoder) |
| { |
| _sde_encoder_destroy_debugfs(encoder); |
| } |
| |
| static int sde_encoder_virt_add_phys_encs( |
| u32 display_caps, |
| struct sde_encoder_virt *sde_enc, |
| struct sde_enc_phys_init_params *params) |
| { |
| struct sde_encoder_phys *enc = NULL; |
| |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| |
| /* |
| * We may create up to NUM_PHYS_ENCODER_TYPES physical encoder types |
| * in this function, check up-front. |
| */ |
| if (sde_enc->num_phys_encs + NUM_PHYS_ENCODER_TYPES >= |
| ARRAY_SIZE(sde_enc->phys_encs)) { |
| SDE_ERROR_ENC(sde_enc, "too many physical encoders %d\n", |
| sde_enc->num_phys_encs); |
| return -EINVAL; |
| } |
| |
| if (display_caps & MSM_DISPLAY_CAP_VID_MODE) { |
| enc = sde_encoder_phys_vid_init(params); |
| |
| if (IS_ERR_OR_NULL(enc)) { |
| SDE_ERROR_ENC(sde_enc, "failed to init vid enc: %ld\n", |
| PTR_ERR(enc)); |
| return enc == 0 ? -EINVAL : PTR_ERR(enc); |
| } |
| |
| sde_enc->phys_encs[sde_enc->num_phys_encs] = enc; |
| ++sde_enc->num_phys_encs; |
| } |
| |
| if (display_caps & MSM_DISPLAY_CAP_CMD_MODE) { |
| enc = sde_encoder_phys_cmd_init(params); |
| |
| if (IS_ERR_OR_NULL(enc)) { |
| SDE_ERROR_ENC(sde_enc, "failed to init cmd enc: %ld\n", |
| PTR_ERR(enc)); |
| return enc == 0 ? -EINVAL : PTR_ERR(enc); |
| } |
| |
| sde_enc->phys_encs[sde_enc->num_phys_encs] = enc; |
| ++sde_enc->num_phys_encs; |
| } |
| |
| return 0; |
| } |
| |
| static int sde_encoder_virt_add_phys_enc_wb(struct sde_encoder_virt *sde_enc, |
| struct sde_enc_phys_init_params *params) |
| { |
| struct sde_encoder_phys *enc = NULL; |
| |
| if (!sde_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return -EINVAL; |
| } |
| |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| |
| if (sde_enc->num_phys_encs + 1 >= ARRAY_SIZE(sde_enc->phys_encs)) { |
| SDE_ERROR_ENC(sde_enc, "too many physical encoders %d\n", |
| sde_enc->num_phys_encs); |
| return -EINVAL; |
| } |
| |
| enc = sde_encoder_phys_wb_init(params); |
| |
| if (IS_ERR_OR_NULL(enc)) { |
| SDE_ERROR_ENC(sde_enc, "failed to init wb enc: %ld\n", |
| PTR_ERR(enc)); |
| return enc == 0 ? -EINVAL : PTR_ERR(enc); |
| } |
| |
| sde_enc->phys_encs[sde_enc->num_phys_encs] = enc; |
| ++sde_enc->num_phys_encs; |
| |
| return 0; |
| } |
| |
| static int sde_encoder_setup_display(struct sde_encoder_virt *sde_enc, |
| struct sde_kms *sde_kms, |
| struct msm_display_info *disp_info, |
| int *drm_enc_mode) |
| { |
| int ret = 0; |
| int i = 0; |
| enum sde_intf_type intf_type; |
| struct sde_encoder_virt_ops parent_ops = { |
| sde_encoder_vblank_callback, |
| sde_encoder_underrun_callback, |
| sde_encoder_frame_done_callback, |
| }; |
| struct sde_enc_phys_init_params phys_params; |
| |
| if (!sde_enc || !sde_kms) { |
| SDE_ERROR("invalid arg(s), enc %d kms %d\n", |
| sde_enc != 0, sde_kms != 0); |
| return -EINVAL; |
| } |
| |
| memset(&phys_params, 0, sizeof(phys_params)); |
| phys_params.sde_kms = sde_kms; |
| phys_params.parent = &sde_enc->base; |
| phys_params.parent_ops = parent_ops; |
| phys_params.enc_spinlock = &sde_enc->enc_spinlock; |
| phys_params.vblank_ctl_lock = &sde_enc->vblank_ctl_lock; |
| |
| SDE_DEBUG("\n"); |
| |
| if (disp_info->intf_type == DRM_MODE_CONNECTOR_DSI) { |
| *drm_enc_mode = DRM_MODE_ENCODER_DSI; |
| intf_type = INTF_DSI; |
| } else if (disp_info->intf_type == DRM_MODE_CONNECTOR_HDMIA) { |
| *drm_enc_mode = DRM_MODE_ENCODER_TMDS; |
| intf_type = INTF_HDMI; |
| } else if (disp_info->intf_type == DRM_MODE_CONNECTOR_DisplayPort) { |
| *drm_enc_mode = DRM_MODE_ENCODER_TMDS; |
| intf_type = INTF_DP; |
| } else if (disp_info->intf_type == DRM_MODE_CONNECTOR_VIRTUAL) { |
| *drm_enc_mode = DRM_MODE_ENCODER_VIRTUAL; |
| intf_type = INTF_WB; |
| } else { |
| SDE_ERROR_ENC(sde_enc, "unsupported display interface type\n"); |
| return -EINVAL; |
| } |
| |
| WARN_ON(disp_info->num_of_h_tiles < 1); |
| |
| sde_enc->display_num_of_h_tiles = disp_info->num_of_h_tiles; |
| |
| SDE_DEBUG("dsi_info->num_of_h_tiles %d\n", disp_info->num_of_h_tiles); |
| |
| if ((disp_info->capabilities & MSM_DISPLAY_CAP_CMD_MODE) || |
| (disp_info->capabilities & MSM_DISPLAY_CAP_VID_MODE)) |
| sde_enc->idle_pc_enabled = sde_kms->catalog->has_idle_pc; |
| |
| mutex_lock(&sde_enc->enc_lock); |
| for (i = 0; i < disp_info->num_of_h_tiles && !ret; i++) { |
| /* |
| * Left-most tile is at index 0, content is controller id |
| * h_tile_instance_ids[2] = {0, 1}; DSI0 = left, DSI1 = right |
| * h_tile_instance_ids[2] = {1, 0}; DSI1 = left, DSI0 = right |
| */ |
| u32 controller_id = disp_info->h_tile_instance[i]; |
| |
| if (disp_info->num_of_h_tiles > 1) { |
| if (i == 0) |
| phys_params.split_role = ENC_ROLE_MASTER; |
| else |
| phys_params.split_role = ENC_ROLE_SLAVE; |
| } else { |
| phys_params.split_role = ENC_ROLE_SOLO; |
| } |
| |
| SDE_DEBUG("h_tile_instance %d = %d, split_role %d\n", |
| i, controller_id, phys_params.split_role); |
| |
| if (intf_type == INTF_WB) { |
| phys_params.intf_idx = INTF_MAX; |
| phys_params.wb_idx = sde_encoder_get_wb( |
| sde_kms->catalog, |
| intf_type, controller_id); |
| if (phys_params.wb_idx == WB_MAX) { |
| SDE_ERROR_ENC(sde_enc, |
| "could not get wb: type %d, id %d\n", |
| intf_type, controller_id); |
| ret = -EINVAL; |
| } |
| } else { |
| phys_params.wb_idx = WB_MAX; |
| phys_params.intf_idx = sde_encoder_get_intf( |
| sde_kms->catalog, intf_type, |
| controller_id); |
| if (phys_params.intf_idx == INTF_MAX) { |
| SDE_ERROR_ENC(sde_enc, |
| "could not get wb: type %d, id %d\n", |
| intf_type, controller_id); |
| ret = -EINVAL; |
| } |
| } |
| |
| if (!ret) { |
| if (intf_type == INTF_WB) |
| ret = sde_encoder_virt_add_phys_enc_wb(sde_enc, |
| &phys_params); |
| else |
| ret = sde_encoder_virt_add_phys_encs( |
| disp_info->capabilities, |
| sde_enc, |
| &phys_params); |
| if (ret) |
| SDE_ERROR_ENC(sde_enc, |
| "failed to add phys encs\n"); |
| } |
| } |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys) { |
| atomic_set(&phys->vsync_cnt, 0); |
| atomic_set(&phys->underrun_cnt, 0); |
| } |
| } |
| mutex_unlock(&sde_enc->enc_lock); |
| |
| return ret; |
| } |
| |
| static const struct drm_encoder_helper_funcs sde_encoder_helper_funcs = { |
| .mode_set = sde_encoder_virt_mode_set, |
| .disable = sde_encoder_virt_disable, |
| .enable = sde_encoder_virt_enable, |
| .atomic_check = sde_encoder_virt_atomic_check, |
| }; |
| |
| static const struct drm_encoder_funcs sde_encoder_funcs = { |
| .destroy = sde_encoder_destroy, |
| .late_register = sde_encoder_late_register, |
| .early_unregister = sde_encoder_early_unregister, |
| }; |
| |
| struct drm_encoder *sde_encoder_init( |
| struct drm_device *dev, |
| struct msm_display_info *disp_info) |
| { |
| struct msm_drm_private *priv = dev->dev_private; |
| struct sde_kms *sde_kms = to_sde_kms(priv->kms); |
| struct drm_encoder *drm_enc = NULL; |
| struct sde_encoder_virt *sde_enc = NULL; |
| int drm_enc_mode = DRM_MODE_ENCODER_NONE; |
| char name[SDE_NAME_SIZE]; |
| int ret = 0; |
| |
| sde_enc = kzalloc(sizeof(*sde_enc), GFP_KERNEL); |
| if (!sde_enc) { |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| mutex_init(&sde_enc->enc_lock); |
| ret = sde_encoder_setup_display(sde_enc, sde_kms, disp_info, |
| &drm_enc_mode); |
| if (ret) |
| goto fail; |
| |
| sde_enc->cur_master = NULL; |
| spin_lock_init(&sde_enc->enc_spinlock); |
| mutex_init(&sde_enc->vblank_ctl_lock); |
| drm_enc = &sde_enc->base; |
| drm_encoder_init(dev, drm_enc, &sde_encoder_funcs, drm_enc_mode, NULL); |
| drm_encoder_helper_add(drm_enc, &sde_encoder_helper_funcs); |
| |
| if ((disp_info->intf_type == DRM_MODE_CONNECTOR_DSI) && |
| disp_info->is_primary) |
| setup_timer(&sde_enc->vsync_event_timer, |
| sde_encoder_vsync_event_handler, |
| (unsigned long)sde_enc); |
| |
| snprintf(name, SDE_NAME_SIZE, "rsc_enc%u", drm_enc->base.id); |
| sde_enc->rsc_client = sde_rsc_client_create(SDE_RSC_INDEX, name, |
| disp_info->is_primary); |
| if (IS_ERR_OR_NULL(sde_enc->rsc_client)) { |
| SDE_DEBUG("sde rsc client create failed :%ld\n", |
| PTR_ERR(sde_enc->rsc_client)); |
| sde_enc->rsc_client = NULL; |
| } |
| |
| if (disp_info->capabilities & MSM_DISPLAY_CAP_CMD_MODE) { |
| ret = _sde_encoder_input_handler(sde_enc); |
| if (ret) |
| SDE_ERROR( |
| "input handler registration failed, rc = %d\n", ret); |
| } |
| |
| mutex_init(&sde_enc->rc_lock); |
| kthread_init_delayed_work(&sde_enc->delayed_off_work, |
| sde_encoder_off_work); |
| sde_enc->vblank_enabled = false; |
| |
| kthread_init_work(&sde_enc->vsync_event_work, |
| sde_encoder_vsync_event_work_handler); |
| |
| kthread_init_work(&sde_enc->input_event_work, |
| sde_encoder_input_event_work_handler); |
| |
| kthread_init_work(&sde_enc->esd_trigger_work, |
| sde_encoder_esd_trigger_work_handler); |
| |
| memcpy(&sde_enc->disp_info, disp_info, sizeof(*disp_info)); |
| |
| SDE_DEBUG_ENC(sde_enc, "created\n"); |
| |
| return drm_enc; |
| |
| fail: |
| SDE_ERROR("failed to create encoder\n"); |
| if (drm_enc) |
| sde_encoder_destroy(drm_enc); |
| |
| return ERR_PTR(ret); |
| } |
| |
| int sde_encoder_wait_for_event(struct drm_encoder *drm_enc, |
| enum msm_event_wait event) |
| { |
| int (*fn_wait)(struct sde_encoder_phys *phys_enc) = NULL; |
| struct sde_encoder_virt *sde_enc = NULL; |
| int i, ret = 0; |
| |
| if (!drm_enc) { |
| SDE_ERROR("invalid encoder\n"); |
| return -EINVAL; |
| } |
| sde_enc = to_sde_encoder_virt(drm_enc); |
| SDE_DEBUG_ENC(sde_enc, "\n"); |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| switch (event) { |
| case MSM_ENC_COMMIT_DONE: |
| fn_wait = phys->ops.wait_for_commit_done; |
| break; |
| case MSM_ENC_TX_COMPLETE: |
| fn_wait = phys->ops.wait_for_tx_complete; |
| break; |
| case MSM_ENC_VBLANK: |
| fn_wait = phys->ops.wait_for_vblank; |
| break; |
| case MSM_ENC_ACTIVE_REGION: |
| fn_wait = phys->ops.wait_for_active; |
| break; |
| default: |
| SDE_ERROR_ENC(sde_enc, "unknown wait event %d\n", |
| event); |
| return -EINVAL; |
| }; |
| |
| if (phys && fn_wait) { |
| SDE_ATRACE_BEGIN("wait_for_completion_event"); |
| ret = fn_wait(phys); |
| SDE_ATRACE_END("wait_for_completion_event"); |
| if (ret) |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| enum sde_intf_mode sde_encoder_get_intf_mode(struct drm_encoder *encoder) |
| { |
| struct sde_encoder_virt *sde_enc = NULL; |
| int i; |
| |
| if (!encoder) { |
| SDE_ERROR("invalid encoder\n"); |
| return INTF_MODE_NONE; |
| } |
| sde_enc = to_sde_encoder_virt(encoder); |
| |
| if (sde_enc->cur_master) |
| return sde_enc->cur_master->intf_mode; |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (phys) |
| return phys->intf_mode; |
| } |
| |
| return INTF_MODE_NONE; |
| } |
| |
| /** |
| * sde_encoder_update_caps_for_cont_splash - update encoder settings during |
| * device bootup when cont_splash is enabled |
| * @drm_enc: Pointer to drm encoder structure |
| * @Return: true if successful in updating the encoder structure |
| */ |
| int sde_encoder_update_caps_for_cont_splash(struct drm_encoder *encoder) |
| { |
| struct sde_encoder_virt *sde_enc; |
| struct msm_drm_private *priv; |
| struct sde_kms *sde_kms; |
| struct drm_connector *conn = NULL; |
| struct sde_connector *sde_conn = NULL; |
| struct sde_connector_state *sde_conn_state = NULL; |
| struct drm_display_mode *drm_mode = NULL; |
| struct sde_rm_hw_iter dsc_iter, pp_iter, ctl_iter; |
| int ret = 0, i; |
| |
| if (!encoder) { |
| SDE_ERROR("invalid drm enc\n"); |
| return -EINVAL; |
| } |
| |
| if (!encoder->dev || !encoder->dev->dev_private) { |
| SDE_ERROR("drm device invalid\n"); |
| return -EINVAL; |
| } |
| |
| priv = encoder->dev->dev_private; |
| if (!priv->kms) { |
| SDE_ERROR("invalid kms\n"); |
| return -EINVAL; |
| } |
| |
| sde_kms = to_sde_kms(priv->kms); |
| sde_enc = to_sde_encoder_virt(encoder); |
| if (!priv->num_connectors) { |
| SDE_ERROR_ENC(sde_enc, "No connectors registered\n"); |
| return -EINVAL; |
| } |
| SDE_DEBUG_ENC(sde_enc, |
| "num of connectors: %d\n", priv->num_connectors); |
| |
| for (i = 0; i < priv->num_connectors; i++) { |
| SDE_DEBUG_ENC(sde_enc, "connector id: %d\n", |
| priv->connectors[i]->base.id); |
| sde_conn = to_sde_connector(priv->connectors[i]); |
| if (!sde_conn->encoder) { |
| SDE_DEBUG_ENC(sde_enc, |
| "encoder not attached to connector\n"); |
| continue; |
| } |
| if (sde_conn->encoder->base.id |
| == encoder->base.id) { |
| conn = (priv->connectors[i]); |
| break; |
| } |
| } |
| |
| if (!conn || !conn->state) { |
| SDE_ERROR_ENC(sde_enc, "connector not found\n"); |
| return -EINVAL; |
| } |
| |
| sde_conn_state = to_sde_connector_state(conn->state); |
| |
| if (!sde_conn->ops.get_mode_info) { |
| SDE_ERROR_ENC(sde_enc, "conn: get_mode_info ops not found\n"); |
| return -EINVAL; |
| } |
| |
| ret = sde_conn->ops.get_mode_info(&encoder->crtc->state->adjusted_mode, |
| &sde_conn_state->mode_info, |
| sde_kms->catalog->max_mixer_width, |
| sde_conn->display); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "conn: ->get_mode_info failed. ret=%d\n", ret); |
| return ret; |
| } |
| |
| ret = sde_rm_reserve(&sde_kms->rm, encoder, encoder->crtc->state, |
| conn->state, false); |
| if (ret) { |
| SDE_ERROR_ENC(sde_enc, |
| "failed to reserve hw resources, %d\n", ret); |
| return ret; |
| } |
| |
| if (sde_conn->encoder) { |
| conn->state->best_encoder = sde_conn->encoder; |
| SDE_DEBUG_ENC(sde_enc, |
| "configured cstate->best_encoder to ID = %d\n", |
| conn->state->best_encoder->base.id); |
| } else { |
| SDE_ERROR_ENC(sde_enc, "No encoder mapped to connector=%d\n", |
| conn->base.id); |
| } |
| |
| SDE_DEBUG_ENC(sde_enc, "connector topology = %llu\n", |
| sde_connector_get_topology_name(conn)); |
| drm_mode = &encoder->crtc->state->adjusted_mode; |
| SDE_DEBUG_ENC(sde_enc, "hdisplay = %d, vdisplay = %d\n", |
| drm_mode->hdisplay, drm_mode->vdisplay); |
| drm_set_preferred_mode(conn, drm_mode->hdisplay, drm_mode->vdisplay); |
| |
| if (encoder->bridge) { |
| SDE_DEBUG_ENC(sde_enc, "Bridge mapped to encoder\n"); |
| /* |
| * For cont-splash use case, we update the mode |
| * configurations manually. This will skip the |
| * usually mode set call when actual frame is |
| * pushed from framework. The bridge needs to |
| * be updated with the current drm mode by |
| * calling the bridge mode set ops. |
| */ |
| if (encoder->bridge->funcs) { |
| SDE_DEBUG_ENC(sde_enc, "calling mode_set\n"); |
| encoder->bridge->funcs->mode_set(encoder->bridge, |
| drm_mode, drm_mode); |
| } |
| } else { |
| SDE_ERROR_ENC(sde_enc, "No bridge attached to encoder\n"); |
| } |
| |
| sde_rm_init_hw_iter(&pp_iter, encoder->base.id, SDE_HW_BLK_PINGPONG); |
| for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { |
| sde_enc->hw_pp[i] = NULL; |
| if (!sde_rm_get_hw(&sde_kms->rm, &pp_iter)) |
| break; |
| sde_enc->hw_pp[i] = (struct sde_hw_pingpong *) pp_iter.hw; |
| } |
| |
| sde_rm_init_hw_iter(&dsc_iter, encoder->base.id, SDE_HW_BLK_DSC); |
| for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) { |
| sde_enc->hw_dsc[i] = NULL; |
| if (!sde_rm_get_hw(&sde_kms->rm, &dsc_iter)) |
| break; |
| sde_enc->hw_dsc[i] = (struct sde_hw_dsc *) dsc_iter.hw; |
| } |
| |
| sde_rm_init_hw_iter(&ctl_iter, encoder->base.id, SDE_HW_BLK_CTL); |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| phys->hw_ctl = NULL; |
| if (!sde_rm_get_hw(&sde_kms->rm, &ctl_iter)) |
| break; |
| phys->hw_ctl = (struct sde_hw_ctl *) ctl_iter.hw; |
| } |
| |
| for (i = 0; i < sde_enc->num_phys_encs; i++) { |
| struct sde_encoder_phys *phys = sde_enc->phys_encs[i]; |
| |
| if (!phys) { |
| SDE_ERROR_ENC(sde_enc, |
| "phys encoders not initialized\n"); |
| return -EINVAL; |
| } |
| |
| /* update connector for master and slave phys encoders */ |
| phys->connector = conn; |
| phys->cont_splash_single_flush = |
| sde_kms->splash_data.single_flush_en; |
| phys->cont_splash_settings = true; |
| |
| phys->hw_pp = sde_enc->hw_pp[i]; |
| if (phys->ops.cont_splash_mode_set) |
| phys->ops.cont_splash_mode_set(phys, drm_mode); |
| |
| if (phys->ops.is_master && phys->ops.is_master(phys)) |
| sde_enc->cur_master = phys; |
| } |
| |
| return ret; |
| } |
| |
| int sde_encoder_display_failure_notification(struct drm_encoder *enc) |
| { |
| struct msm_drm_thread *event_thread = NULL; |
| struct msm_drm_private *priv = NULL; |
| struct sde_encoder_virt *sde_enc = NULL; |
| |
| if (!enc || !enc->dev || !enc->dev->dev_private) { |
| SDE_ERROR("invalid parameters\n"); |
| return -EINVAL; |
| } |
| |
| priv = enc->dev->dev_private; |
| sde_enc = to_sde_encoder_virt(enc); |
| if (!sde_enc->crtc || (sde_enc->crtc->index |
| >= ARRAY_SIZE(priv->event_thread))) { |
| SDE_DEBUG_ENC(sde_enc, |
| "invalid cached CRTC: %d or crtc index: %d\n", |
| sde_enc->crtc == NULL, |
| sde_enc->crtc ? sde_enc->crtc->index : -EINVAL); |
| return -EINVAL; |
| } |
| |
| SDE_EVT32_VERBOSE(DRMID(enc)); |
| |
| event_thread = &priv->event_thread[sde_enc->crtc->index]; |
| |
| kthread_queue_work(&event_thread->worker, |
| &sde_enc->esd_trigger_work); |
| kthread_flush_work(&sde_enc->esd_trigger_work); |
| |
| /** |
| * panel may stop generating te signal (vsync) during esd failure. rsc |
| * hardware may hang without vsync. Avoid rsc hang by generating the |
| * vsync from watchdog timer instead of panel. |
| */ |
| _sde_encoder_switch_to_watchdog_vsync(enc); |
| |
| sde_encoder_wait_for_event(enc, MSM_ENC_TX_COMPLETE); |
| |
| return 0; |
| } |