| /* |
| * driver/mfd/asic3.c |
| * |
| * Compaq ASIC3 support. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Copyright 2001 Compaq Computer Corporation. |
| * Copyright 2004-2005 Phil Blundell |
| * Copyright 2007-2008 OpenedHand Ltd. |
| * |
| * Authors: Phil Blundell <pb@handhelds.org>, |
| * Samuel Ortiz <sameo@openedhand.com> |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/gpio.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/mfd/asic3.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/ds1wm.h> |
| #include <linux/mfd/tmio.h> |
| |
| enum { |
| ASIC3_CLOCK_SPI, |
| ASIC3_CLOCK_OWM, |
| ASIC3_CLOCK_PWM0, |
| ASIC3_CLOCK_PWM1, |
| ASIC3_CLOCK_LED0, |
| ASIC3_CLOCK_LED1, |
| ASIC3_CLOCK_LED2, |
| ASIC3_CLOCK_SD_HOST, |
| ASIC3_CLOCK_SD_BUS, |
| ASIC3_CLOCK_SMBUS, |
| ASIC3_CLOCK_EX0, |
| ASIC3_CLOCK_EX1, |
| }; |
| |
| struct asic3_clk { |
| int enabled; |
| unsigned int cdex; |
| unsigned long rate; |
| }; |
| |
| #define INIT_CDEX(_name, _rate) \ |
| [ASIC3_CLOCK_##_name] = { \ |
| .cdex = CLOCK_CDEX_##_name, \ |
| .rate = _rate, \ |
| } |
| |
| static struct asic3_clk asic3_clk_init[] __initdata = { |
| INIT_CDEX(SPI, 0), |
| INIT_CDEX(OWM, 5000000), |
| INIT_CDEX(PWM0, 0), |
| INIT_CDEX(PWM1, 0), |
| INIT_CDEX(LED0, 0), |
| INIT_CDEX(LED1, 0), |
| INIT_CDEX(LED2, 0), |
| INIT_CDEX(SD_HOST, 24576000), |
| INIT_CDEX(SD_BUS, 12288000), |
| INIT_CDEX(SMBUS, 0), |
| INIT_CDEX(EX0, 32768), |
| INIT_CDEX(EX1, 24576000), |
| }; |
| |
| struct asic3 { |
| void __iomem *mapping; |
| unsigned int bus_shift; |
| unsigned int irq_nr; |
| unsigned int irq_base; |
| spinlock_t lock; |
| u16 irq_bothedge[4]; |
| struct gpio_chip gpio; |
| struct device *dev; |
| void __iomem *tmio_cnf; |
| |
| struct asic3_clk clocks[ARRAY_SIZE(asic3_clk_init)]; |
| }; |
| |
| static int asic3_gpio_get(struct gpio_chip *chip, unsigned offset); |
| |
| static inline void asic3_write_register(struct asic3 *asic, |
| unsigned int reg, u32 value) |
| { |
| iowrite16(value, asic->mapping + |
| (reg >> asic->bus_shift)); |
| } |
| |
| static inline u32 asic3_read_register(struct asic3 *asic, |
| unsigned int reg) |
| { |
| return ioread16(asic->mapping + |
| (reg >> asic->bus_shift)); |
| } |
| |
| static void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set) |
| { |
| unsigned long flags; |
| u32 val; |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| val = asic3_read_register(asic, reg); |
| if (set) |
| val |= bits; |
| else |
| val &= ~bits; |
| asic3_write_register(asic, reg, val); |
| spin_unlock_irqrestore(&asic->lock, flags); |
| } |
| |
| /* IRQs */ |
| #define MAX_ASIC_ISR_LOOPS 20 |
| #define ASIC3_GPIO_BASE_INCR \ |
| (ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE) |
| |
| static void asic3_irq_flip_edge(struct asic3 *asic, |
| u32 base, int bit) |
| { |
| u16 edge; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| edge = asic3_read_register(asic, |
| base + ASIC3_GPIO_EDGE_TRIGGER); |
| edge ^= bit; |
| asic3_write_register(asic, |
| base + ASIC3_GPIO_EDGE_TRIGGER, edge); |
| spin_unlock_irqrestore(&asic->lock, flags); |
| } |
| |
| static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc) |
| { |
| struct asic3 *asic = irq_desc_get_handler_data(desc); |
| struct irq_data *data = irq_desc_get_irq_data(desc); |
| int iter, i; |
| unsigned long flags; |
| |
| data->chip->irq_ack(data); |
| |
| for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) { |
| u32 status; |
| int bank; |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| status = asic3_read_register(asic, |
| ASIC3_OFFSET(INTR, P_INT_STAT)); |
| spin_unlock_irqrestore(&asic->lock, flags); |
| |
| /* Check all ten register bits */ |
| if ((status & 0x3ff) == 0) |
| break; |
| |
| /* Handle GPIO IRQs */ |
| for (bank = 0; bank < ASIC3_NUM_GPIO_BANKS; bank++) { |
| if (status & (1 << bank)) { |
| unsigned long base, istat; |
| |
| base = ASIC3_GPIO_A_BASE |
| + bank * ASIC3_GPIO_BASE_INCR; |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| istat = asic3_read_register(asic, |
| base + |
| ASIC3_GPIO_INT_STATUS); |
| /* Clearing IntStatus */ |
| asic3_write_register(asic, |
| base + |
| ASIC3_GPIO_INT_STATUS, 0); |
| spin_unlock_irqrestore(&asic->lock, flags); |
| |
| for (i = 0; i < ASIC3_GPIOS_PER_BANK; i++) { |
| int bit = (1 << i); |
| unsigned int irqnr; |
| |
| if (!(istat & bit)) |
| continue; |
| |
| irqnr = asic->irq_base + |
| (ASIC3_GPIOS_PER_BANK * bank) |
| + i; |
| generic_handle_irq(irqnr); |
| if (asic->irq_bothedge[bank] & bit) |
| asic3_irq_flip_edge(asic, base, |
| bit); |
| } |
| } |
| } |
| |
| /* Handle remaining IRQs in the status register */ |
| for (i = ASIC3_NUM_GPIOS; i < ASIC3_NR_IRQS; i++) { |
| /* They start at bit 4 and go up */ |
| if (status & (1 << (i - ASIC3_NUM_GPIOS + 4))) |
| generic_handle_irq(asic->irq_base + i); |
| } |
| } |
| |
| if (iter >= MAX_ASIC_ISR_LOOPS) |
| dev_err(asic->dev, "interrupt processing overrun\n"); |
| } |
| |
| static inline int asic3_irq_to_bank(struct asic3 *asic, int irq) |
| { |
| int n; |
| |
| n = (irq - asic->irq_base) >> 4; |
| |
| return (n * (ASIC3_GPIO_B_BASE - ASIC3_GPIO_A_BASE)); |
| } |
| |
| static inline int asic3_irq_to_index(struct asic3 *asic, int irq) |
| { |
| return (irq - asic->irq_base) & 0xf; |
| } |
| |
| static void asic3_mask_gpio_irq(struct irq_data *data) |
| { |
| struct asic3 *asic = irq_data_get_irq_chip_data(data); |
| u32 val, bank, index; |
| unsigned long flags; |
| |
| bank = asic3_irq_to_bank(asic, data->irq); |
| index = asic3_irq_to_index(asic, data->irq); |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK); |
| val |= 1 << index; |
| asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val); |
| spin_unlock_irqrestore(&asic->lock, flags); |
| } |
| |
| static void asic3_mask_irq(struct irq_data *data) |
| { |
| struct asic3 *asic = irq_data_get_irq_chip_data(data); |
| int regval; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| regval = asic3_read_register(asic, |
| ASIC3_INTR_BASE + |
| ASIC3_INTR_INT_MASK); |
| |
| regval &= ~(ASIC3_INTMASK_MASK0 << |
| (data->irq - (asic->irq_base + ASIC3_NUM_GPIOS))); |
| |
| asic3_write_register(asic, |
| ASIC3_INTR_BASE + |
| ASIC3_INTR_INT_MASK, |
| regval); |
| spin_unlock_irqrestore(&asic->lock, flags); |
| } |
| |
| static void asic3_unmask_gpio_irq(struct irq_data *data) |
| { |
| struct asic3 *asic = irq_data_get_irq_chip_data(data); |
| u32 val, bank, index; |
| unsigned long flags; |
| |
| bank = asic3_irq_to_bank(asic, data->irq); |
| index = asic3_irq_to_index(asic, data->irq); |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| val = asic3_read_register(asic, bank + ASIC3_GPIO_MASK); |
| val &= ~(1 << index); |
| asic3_write_register(asic, bank + ASIC3_GPIO_MASK, val); |
| spin_unlock_irqrestore(&asic->lock, flags); |
| } |
| |
| static void asic3_unmask_irq(struct irq_data *data) |
| { |
| struct asic3 *asic = irq_data_get_irq_chip_data(data); |
| int regval; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| regval = asic3_read_register(asic, |
| ASIC3_INTR_BASE + |
| ASIC3_INTR_INT_MASK); |
| |
| regval |= (ASIC3_INTMASK_MASK0 << |
| (data->irq - (asic->irq_base + ASIC3_NUM_GPIOS))); |
| |
| asic3_write_register(asic, |
| ASIC3_INTR_BASE + |
| ASIC3_INTR_INT_MASK, |
| regval); |
| spin_unlock_irqrestore(&asic->lock, flags); |
| } |
| |
| static int asic3_gpio_irq_type(struct irq_data *data, unsigned int type) |
| { |
| struct asic3 *asic = irq_data_get_irq_chip_data(data); |
| u32 bank, index; |
| u16 trigger, level, edge, bit; |
| unsigned long flags; |
| |
| bank = asic3_irq_to_bank(asic, data->irq); |
| index = asic3_irq_to_index(asic, data->irq); |
| bit = 1<<index; |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| level = asic3_read_register(asic, |
| bank + ASIC3_GPIO_LEVEL_TRIGGER); |
| edge = asic3_read_register(asic, |
| bank + ASIC3_GPIO_EDGE_TRIGGER); |
| trigger = asic3_read_register(asic, |
| bank + ASIC3_GPIO_TRIGGER_TYPE); |
| asic->irq_bothedge[(data->irq - asic->irq_base) >> 4] &= ~bit; |
| |
| if (type == IRQ_TYPE_EDGE_RISING) { |
| trigger |= bit; |
| edge |= bit; |
| } else if (type == IRQ_TYPE_EDGE_FALLING) { |
| trigger |= bit; |
| edge &= ~bit; |
| } else if (type == IRQ_TYPE_EDGE_BOTH) { |
| trigger |= bit; |
| if (asic3_gpio_get(&asic->gpio, data->irq - asic->irq_base)) |
| edge &= ~bit; |
| else |
| edge |= bit; |
| asic->irq_bothedge[(data->irq - asic->irq_base) >> 4] |= bit; |
| } else if (type == IRQ_TYPE_LEVEL_LOW) { |
| trigger &= ~bit; |
| level &= ~bit; |
| } else if (type == IRQ_TYPE_LEVEL_HIGH) { |
| trigger &= ~bit; |
| level |= bit; |
| } else { |
| /* |
| * if type == IRQ_TYPE_NONE, we should mask interrupts, but |
| * be careful to not unmask them if mask was also called. |
| * Probably need internal state for mask. |
| */ |
| dev_notice(asic->dev, "irq type not changed\n"); |
| } |
| asic3_write_register(asic, bank + ASIC3_GPIO_LEVEL_TRIGGER, |
| level); |
| asic3_write_register(asic, bank + ASIC3_GPIO_EDGE_TRIGGER, |
| edge); |
| asic3_write_register(asic, bank + ASIC3_GPIO_TRIGGER_TYPE, |
| trigger); |
| spin_unlock_irqrestore(&asic->lock, flags); |
| return 0; |
| } |
| |
| static struct irq_chip asic3_gpio_irq_chip = { |
| .name = "ASIC3-GPIO", |
| .irq_ack = asic3_mask_gpio_irq, |
| .irq_mask = asic3_mask_gpio_irq, |
| .irq_unmask = asic3_unmask_gpio_irq, |
| .irq_set_type = asic3_gpio_irq_type, |
| }; |
| |
| static struct irq_chip asic3_irq_chip = { |
| .name = "ASIC3", |
| .irq_ack = asic3_mask_irq, |
| .irq_mask = asic3_mask_irq, |
| .irq_unmask = asic3_unmask_irq, |
| }; |
| |
| static int __init asic3_irq_probe(struct platform_device *pdev) |
| { |
| struct asic3 *asic = platform_get_drvdata(pdev); |
| unsigned long clksel = 0; |
| unsigned int irq, irq_base; |
| int ret; |
| |
| ret = platform_get_irq(pdev, 0); |
| if (ret < 0) |
| return ret; |
| asic->irq_nr = ret; |
| |
| /* turn on clock to IRQ controller */ |
| clksel |= CLOCK_SEL_CX; |
| asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), |
| clksel); |
| |
| irq_base = asic->irq_base; |
| |
| for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) { |
| if (irq < asic->irq_base + ASIC3_NUM_GPIOS) |
| irq_set_chip(irq, &asic3_gpio_irq_chip); |
| else |
| irq_set_chip(irq, &asic3_irq_chip); |
| |
| irq_set_chip_data(irq, asic); |
| irq_set_handler(irq, handle_level_irq); |
| set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); |
| } |
| |
| asic3_write_register(asic, ASIC3_OFFSET(INTR, INT_MASK), |
| ASIC3_INTMASK_GINTMASK); |
| |
| irq_set_chained_handler(asic->irq_nr, asic3_irq_demux); |
| irq_set_irq_type(asic->irq_nr, IRQ_TYPE_EDGE_RISING); |
| irq_set_handler_data(asic->irq_nr, asic); |
| |
| return 0; |
| } |
| |
| static void asic3_irq_remove(struct platform_device *pdev) |
| { |
| struct asic3 *asic = platform_get_drvdata(pdev); |
| unsigned int irq, irq_base; |
| |
| irq_base = asic->irq_base; |
| |
| for (irq = irq_base; irq < irq_base + ASIC3_NR_IRQS; irq++) { |
| set_irq_flags(irq, 0); |
| irq_set_chip_and_handler(irq, NULL, NULL); |
| irq_set_chip_data(irq, NULL); |
| } |
| irq_set_chained_handler(asic->irq_nr, NULL); |
| } |
| |
| /* GPIOs */ |
| static int asic3_gpio_direction(struct gpio_chip *chip, |
| unsigned offset, int out) |
| { |
| u32 mask = ASIC3_GPIO_TO_MASK(offset), out_reg; |
| unsigned int gpio_base; |
| unsigned long flags; |
| struct asic3 *asic; |
| |
| asic = container_of(chip, struct asic3, gpio); |
| gpio_base = ASIC3_GPIO_TO_BASE(offset); |
| |
| if (gpio_base > ASIC3_GPIO_D_BASE) { |
| dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n", |
| gpio_base, offset); |
| return -EINVAL; |
| } |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| |
| out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_DIRECTION); |
| |
| /* Input is 0, Output is 1 */ |
| if (out) |
| out_reg |= mask; |
| else |
| out_reg &= ~mask; |
| |
| asic3_write_register(asic, gpio_base + ASIC3_GPIO_DIRECTION, out_reg); |
| |
| spin_unlock_irqrestore(&asic->lock, flags); |
| |
| return 0; |
| |
| } |
| |
| static int asic3_gpio_direction_input(struct gpio_chip *chip, |
| unsigned offset) |
| { |
| return asic3_gpio_direction(chip, offset, 0); |
| } |
| |
| static int asic3_gpio_direction_output(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| return asic3_gpio_direction(chip, offset, 1); |
| } |
| |
| static int asic3_gpio_get(struct gpio_chip *chip, |
| unsigned offset) |
| { |
| unsigned int gpio_base; |
| u32 mask = ASIC3_GPIO_TO_MASK(offset); |
| struct asic3 *asic; |
| |
| asic = container_of(chip, struct asic3, gpio); |
| gpio_base = ASIC3_GPIO_TO_BASE(offset); |
| |
| if (gpio_base > ASIC3_GPIO_D_BASE) { |
| dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n", |
| gpio_base, offset); |
| return -EINVAL; |
| } |
| |
| return asic3_read_register(asic, gpio_base + ASIC3_GPIO_STATUS) & mask; |
| } |
| |
| static void asic3_gpio_set(struct gpio_chip *chip, |
| unsigned offset, int value) |
| { |
| u32 mask, out_reg; |
| unsigned int gpio_base; |
| unsigned long flags; |
| struct asic3 *asic; |
| |
| asic = container_of(chip, struct asic3, gpio); |
| gpio_base = ASIC3_GPIO_TO_BASE(offset); |
| |
| if (gpio_base > ASIC3_GPIO_D_BASE) { |
| dev_err(asic->dev, "Invalid base (0x%x) for gpio %d\n", |
| gpio_base, offset); |
| return; |
| } |
| |
| mask = ASIC3_GPIO_TO_MASK(offset); |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| |
| out_reg = asic3_read_register(asic, gpio_base + ASIC3_GPIO_OUT); |
| |
| if (value) |
| out_reg |= mask; |
| else |
| out_reg &= ~mask; |
| |
| asic3_write_register(asic, gpio_base + ASIC3_GPIO_OUT, out_reg); |
| |
| spin_unlock_irqrestore(&asic->lock, flags); |
| |
| return; |
| } |
| |
| static __init int asic3_gpio_probe(struct platform_device *pdev, |
| u16 *gpio_config, int num) |
| { |
| struct asic3 *asic = platform_get_drvdata(pdev); |
| u16 alt_reg[ASIC3_NUM_GPIO_BANKS]; |
| u16 out_reg[ASIC3_NUM_GPIO_BANKS]; |
| u16 dir_reg[ASIC3_NUM_GPIO_BANKS]; |
| int i; |
| |
| memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); |
| memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); |
| memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); |
| |
| /* Enable all GPIOs */ |
| asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff); |
| asic3_write_register(asic, ASIC3_GPIO_OFFSET(B, MASK), 0xffff); |
| asic3_write_register(asic, ASIC3_GPIO_OFFSET(C, MASK), 0xffff); |
| asic3_write_register(asic, ASIC3_GPIO_OFFSET(D, MASK), 0xffff); |
| |
| for (i = 0; i < num; i++) { |
| u8 alt, pin, dir, init, bank_num, bit_num; |
| u16 config = gpio_config[i]; |
| |
| pin = ASIC3_CONFIG_GPIO_PIN(config); |
| alt = ASIC3_CONFIG_GPIO_ALT(config); |
| dir = ASIC3_CONFIG_GPIO_DIR(config); |
| init = ASIC3_CONFIG_GPIO_INIT(config); |
| |
| bank_num = ASIC3_GPIO_TO_BANK(pin); |
| bit_num = ASIC3_GPIO_TO_BIT(pin); |
| |
| alt_reg[bank_num] |= (alt << bit_num); |
| out_reg[bank_num] |= (init << bit_num); |
| dir_reg[bank_num] |= (dir << bit_num); |
| } |
| |
| for (i = 0; i < ASIC3_NUM_GPIO_BANKS; i++) { |
| asic3_write_register(asic, |
| ASIC3_BANK_TO_BASE(i) + |
| ASIC3_GPIO_DIRECTION, |
| dir_reg[i]); |
| asic3_write_register(asic, |
| ASIC3_BANK_TO_BASE(i) + ASIC3_GPIO_OUT, |
| out_reg[i]); |
| asic3_write_register(asic, |
| ASIC3_BANK_TO_BASE(i) + |
| ASIC3_GPIO_ALT_FUNCTION, |
| alt_reg[i]); |
| } |
| |
| return gpiochip_add(&asic->gpio); |
| } |
| |
| static int asic3_gpio_remove(struct platform_device *pdev) |
| { |
| struct asic3 *asic = platform_get_drvdata(pdev); |
| |
| return gpiochip_remove(&asic->gpio); |
| } |
| |
| static int asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk) |
| { |
| unsigned long flags; |
| u32 cdex; |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| if (clk->enabled++ == 0) { |
| cdex = asic3_read_register(asic, ASIC3_OFFSET(CLOCK, CDEX)); |
| cdex |= clk->cdex; |
| asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex); |
| } |
| spin_unlock_irqrestore(&asic->lock, flags); |
| |
| return 0; |
| } |
| |
| static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk) |
| { |
| unsigned long flags; |
| u32 cdex; |
| |
| WARN_ON(clk->enabled == 0); |
| |
| spin_lock_irqsave(&asic->lock, flags); |
| if (--clk->enabled == 0) { |
| cdex = asic3_read_register(asic, ASIC3_OFFSET(CLOCK, CDEX)); |
| cdex &= ~clk->cdex; |
| asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex); |
| } |
| spin_unlock_irqrestore(&asic->lock, flags); |
| } |
| |
| /* MFD cells (SPI, PWM, LED, DS1WM, MMC) */ |
| static struct ds1wm_driver_data ds1wm_pdata = { |
| .active_high = 1, |
| }; |
| |
| static struct resource ds1wm_resources[] = { |
| { |
| .start = ASIC3_OWM_BASE, |
| .end = ASIC3_OWM_BASE + 0x13, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = ASIC3_IRQ_OWM, |
| .end = ASIC3_IRQ_OWM, |
| .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, |
| }, |
| }; |
| |
| static int ds1wm_enable(struct platform_device *pdev) |
| { |
| struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); |
| |
| /* Turn on external clocks and the OWM clock */ |
| asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]); |
| asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]); |
| asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_OWM]); |
| msleep(1); |
| |
| /* Reset and enable DS1WM */ |
| asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET), |
| ASIC3_EXTCF_OWM_RESET, 1); |
| msleep(1); |
| asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET), |
| ASIC3_EXTCF_OWM_RESET, 0); |
| msleep(1); |
| asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT), |
| ASIC3_EXTCF_OWM_EN, 1); |
| msleep(1); |
| |
| return 0; |
| } |
| |
| static int ds1wm_disable(struct platform_device *pdev) |
| { |
| struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); |
| |
| asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT), |
| ASIC3_EXTCF_OWM_EN, 0); |
| |
| asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_OWM]); |
| asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]); |
| asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]); |
| |
| return 0; |
| } |
| |
| static struct mfd_cell asic3_cell_ds1wm = { |
| .name = "ds1wm", |
| .enable = ds1wm_enable, |
| .disable = ds1wm_disable, |
| .mfd_data = &ds1wm_pdata, |
| .num_resources = ARRAY_SIZE(ds1wm_resources), |
| .resources = ds1wm_resources, |
| }; |
| |
| static void asic3_mmc_pwr(struct platform_device *pdev, int state) |
| { |
| struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); |
| |
| tmio_core_mmc_pwr(asic->tmio_cnf, 1 - asic->bus_shift, state); |
| } |
| |
| static void asic3_mmc_clk_div(struct platform_device *pdev, int state) |
| { |
| struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); |
| |
| tmio_core_mmc_clk_div(asic->tmio_cnf, 1 - asic->bus_shift, state); |
| } |
| |
| static struct tmio_mmc_data asic3_mmc_data = { |
| .hclk = 24576000, |
| .set_pwr = asic3_mmc_pwr, |
| .set_clk_div = asic3_mmc_clk_div, |
| }; |
| |
| static struct resource asic3_mmc_resources[] = { |
| { |
| .start = ASIC3_SD_CTRL_BASE, |
| .end = ASIC3_SD_CTRL_BASE + 0x3ff, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = 0, |
| .end = 0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static int asic3_mmc_enable(struct platform_device *pdev) |
| { |
| struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); |
| |
| /* Not sure if it must be done bit by bit, but leaving as-is */ |
| asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), |
| ASIC3_SDHWCTRL_LEVCD, 1); |
| asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), |
| ASIC3_SDHWCTRL_LEVWP, 1); |
| asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), |
| ASIC3_SDHWCTRL_SUSPEND, 0); |
| asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), |
| ASIC3_SDHWCTRL_PCLR, 0); |
| |
| asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]); |
| /* CLK32 used for card detection and for interruption detection |
| * when HCLK is stopped. |
| */ |
| asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]); |
| msleep(1); |
| |
| /* HCLK 24.576 MHz, BCLK 12.288 MHz: */ |
| asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), |
| CLOCK_SEL_CX | CLOCK_SEL_SD_HCLK_SEL); |
| |
| asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]); |
| asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]); |
| msleep(1); |
| |
| asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT), |
| ASIC3_EXTCF_SD_MEM_ENABLE, 1); |
| |
| /* Enable SD card slot 3.3V power supply */ |
| asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), |
| ASIC3_SDHWCTRL_SDPWR, 1); |
| |
| /* ASIC3_SD_CTRL_BASE assumes 32-bit addressing, TMIO is 16-bit */ |
| tmio_core_mmc_enable(asic->tmio_cnf, 1 - asic->bus_shift, |
| ASIC3_SD_CTRL_BASE >> 1); |
| |
| return 0; |
| } |
| |
| static int asic3_mmc_disable(struct platform_device *pdev) |
| { |
| struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); |
| |
| /* Put in suspend mode */ |
| asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), |
| ASIC3_SDHWCTRL_SUSPEND, 1); |
| |
| /* Disable clocks */ |
| asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]); |
| asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]); |
| asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]); |
| asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]); |
| return 0; |
| } |
| |
| static struct mfd_cell asic3_cell_mmc = { |
| .name = "tmio-mmc", |
| .enable = asic3_mmc_enable, |
| .disable = asic3_mmc_disable, |
| .mfd_data = &asic3_mmc_data, |
| .num_resources = ARRAY_SIZE(asic3_mmc_resources), |
| .resources = asic3_mmc_resources, |
| }; |
| |
| static int __init asic3_mfd_probe(struct platform_device *pdev, |
| struct resource *mem) |
| { |
| struct asic3 *asic = platform_get_drvdata(pdev); |
| struct resource *mem_sdio; |
| int irq, ret; |
| |
| mem_sdio = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (!mem_sdio) |
| dev_dbg(asic->dev, "no SDIO MEM resource\n"); |
| |
| irq = platform_get_irq(pdev, 1); |
| if (irq < 0) |
| dev_dbg(asic->dev, "no SDIO IRQ resource\n"); |
| |
| /* DS1WM */ |
| asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT), |
| ASIC3_EXTCF_OWM_SMB, 0); |
| |
| ds1wm_resources[0].start >>= asic->bus_shift; |
| ds1wm_resources[0].end >>= asic->bus_shift; |
| |
| /* MMC */ |
| asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) + |
| mem_sdio->start, 0x400 >> asic->bus_shift); |
| if (!asic->tmio_cnf) { |
| ret = -ENOMEM; |
| dev_dbg(asic->dev, "Couldn't ioremap SD_CONFIG\n"); |
| goto out; |
| } |
| asic3_mmc_resources[0].start >>= asic->bus_shift; |
| asic3_mmc_resources[0].end >>= asic->bus_shift; |
| |
| ret = mfd_add_devices(&pdev->dev, pdev->id, |
| &asic3_cell_ds1wm, 1, mem, asic->irq_base); |
| if (ret < 0) |
| goto out; |
| |
| if (mem_sdio && (irq >= 0)) |
| ret = mfd_add_devices(&pdev->dev, pdev->id, |
| &asic3_cell_mmc, 1, mem_sdio, irq); |
| |
| out: |
| return ret; |
| } |
| |
| static void asic3_mfd_remove(struct platform_device *pdev) |
| { |
| struct asic3 *asic = platform_get_drvdata(pdev); |
| |
| mfd_remove_devices(&pdev->dev); |
| iounmap(asic->tmio_cnf); |
| } |
| |
| /* Core */ |
| static int __init asic3_probe(struct platform_device *pdev) |
| { |
| struct asic3_platform_data *pdata = pdev->dev.platform_data; |
| struct asic3 *asic; |
| struct resource *mem; |
| unsigned long clksel; |
| int ret = 0; |
| |
| asic = kzalloc(sizeof(struct asic3), GFP_KERNEL); |
| if (asic == NULL) { |
| printk(KERN_ERR "kzalloc failed\n"); |
| return -ENOMEM; |
| } |
| |
| spin_lock_init(&asic->lock); |
| platform_set_drvdata(pdev, asic); |
| asic->dev = &pdev->dev; |
| |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!mem) { |
| ret = -ENOMEM; |
| dev_err(asic->dev, "no MEM resource\n"); |
| goto out_free; |
| } |
| |
| asic->mapping = ioremap(mem->start, resource_size(mem)); |
| if (!asic->mapping) { |
| ret = -ENOMEM; |
| dev_err(asic->dev, "Couldn't ioremap\n"); |
| goto out_free; |
| } |
| |
| asic->irq_base = pdata->irq_base; |
| |
| /* calculate bus shift from mem resource */ |
| asic->bus_shift = 2 - (resource_size(mem) >> 12); |
| |
| clksel = 0; |
| asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel); |
| |
| ret = asic3_irq_probe(pdev); |
| if (ret < 0) { |
| dev_err(asic->dev, "Couldn't probe IRQs\n"); |
| goto out_unmap; |
| } |
| |
| asic->gpio.base = pdata->gpio_base; |
| asic->gpio.ngpio = ASIC3_NUM_GPIOS; |
| asic->gpio.get = asic3_gpio_get; |
| asic->gpio.set = asic3_gpio_set; |
| asic->gpio.direction_input = asic3_gpio_direction_input; |
| asic->gpio.direction_output = asic3_gpio_direction_output; |
| |
| ret = asic3_gpio_probe(pdev, |
| pdata->gpio_config, |
| pdata->gpio_config_num); |
| if (ret < 0) { |
| dev_err(asic->dev, "GPIO probe failed\n"); |
| goto out_irq; |
| } |
| |
| /* Making a per-device copy is only needed for the |
| * theoretical case of multiple ASIC3s on one board: |
| */ |
| memcpy(asic->clocks, asic3_clk_init, sizeof(asic3_clk_init)); |
| |
| asic3_mfd_probe(pdev, mem); |
| |
| dev_info(asic->dev, "ASIC3 Core driver\n"); |
| |
| return 0; |
| |
| out_irq: |
| asic3_irq_remove(pdev); |
| |
| out_unmap: |
| iounmap(asic->mapping); |
| |
| out_free: |
| kfree(asic); |
| |
| return ret; |
| } |
| |
| static int __devexit asic3_remove(struct platform_device *pdev) |
| { |
| int ret; |
| struct asic3 *asic = platform_get_drvdata(pdev); |
| |
| asic3_mfd_remove(pdev); |
| |
| ret = asic3_gpio_remove(pdev); |
| if (ret < 0) |
| return ret; |
| asic3_irq_remove(pdev); |
| |
| asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), 0); |
| |
| iounmap(asic->mapping); |
| |
| kfree(asic); |
| |
| return 0; |
| } |
| |
| static void asic3_shutdown(struct platform_device *pdev) |
| { |
| } |
| |
| static struct platform_driver asic3_device_driver = { |
| .driver = { |
| .name = "asic3", |
| }, |
| .remove = __devexit_p(asic3_remove), |
| .shutdown = asic3_shutdown, |
| }; |
| |
| static int __init asic3_init(void) |
| { |
| int retval = 0; |
| retval = platform_driver_probe(&asic3_device_driver, asic3_probe); |
| return retval; |
| } |
| |
| subsys_initcall(asic3_init); |