drivers/char/rio/rioparam.c - kernel/msm-4.9 - Gitiles

 /*
 ** -----------------------------------------------------------------------------
 **
 **  Perle Specialix driver for Linux
 **  Ported from existing RIO Driver for SCO sources.
  *
  *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
  *
  *      This program is free software; you can redistribute it and/or modify
  *      it under the terms of the GNU General Public License as published by
  *      the Free Software Foundation; either version 2 of the License, or
  *      (at your option) any later version.
  *
  *      This program is distributed in the hope that it will be useful,
  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *      GNU General Public License for more details.
  *
  *      You should have received a copy of the GNU General Public License
  *      along with this program; if not, write to the Free Software
  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 **
 **	Module		: rioparam.c
 **	SID		: 1.3
 **	Last Modified	: 11/6/98 10:33:45
 **	Retrieved	: 11/6/98 10:33:50
 **
 **  ident @(#)rioparam.c	1.3
 **
 ** -----------------------------------------------------------------------------
 */

 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/tty.h>
 #include <asm/io.h>
 #include <asm/system.h>
 #include <asm/string.h>
 #include <asm/uaccess.h>

 #include <linux/termios.h>
 #include <linux/serial.h>

 #include <linux/generic_serial.h>


 #include "linux_compat.h"
 #include "rio_linux.h"
 #include "pkt.h"
 #include "daemon.h"
 #include "rio.h"
 #include "riospace.h"
 #include "cmdpkt.h"
 #include "map.h"
 #include "rup.h"
 #include "port.h"
 #include "riodrvr.h"
 #include "rioinfo.h"
 #include "func.h"
 #include "errors.h"
 #include "pci.h"

 #include "parmmap.h"
 #include "unixrup.h"
 #include "board.h"
 #include "host.h"
 #include "phb.h"
 #include "link.h"
 #include "cmdblk.h"
 #include "route.h"
 #include "cirrus.h"
 #include "rioioctl.h"
 #include "param.h"


 /*
 ** The Scam, based on email from jeremyr@bugs.specialix.co.uk....
 **
 ** To send a command on a particular port, you put a packet with the
 ** command bit set onto the port. The command bit is in the len field,
 ** and gets ORed in with the actual byte count.
 **
 ** When you send a packet with the command bit set the first
 ** data byte (data[0]) is interpreted as the command to execute.
 ** It also governs what data structure overlay should accompany the packet.
 ** Commands are defined in cirrus/cirrus.h
 **
 ** If you want the command to pre-emt data already on the queue for the
 ** port, set the pre-emptive bit in conjunction with the command bit.
 ** It is not defined what will happen if you set the preemptive bit
 ** on a packet that is NOT a command.
 **
 ** Pre-emptive commands should be queued at the head of the queue using
 ** add_start(), whereas normal commands and data are enqueued using
 ** add_end().
 **
 ** Most commands do not use the remaining bytes in the data array. The
 ** exceptions are OPEN MOPEN and CONFIG. (NB. As with the SI CONFIG and
 ** OPEN are currently analogous). With these three commands the following
 ** 11 data bytes are all used to pass config information such as baud rate etc.
 ** The fields are also defined in cirrus.h. Some contain straightforward
 ** information such as the transmit XON character. Two contain the transmit and
 ** receive baud rates respectively. For most baud rates there is a direct
 ** mapping between the rates defined in <sys/termio.h> and the byte in the
 ** packet. There are additional (non UNIX-standard) rates defined in
 ** /u/dos/rio/cirrus/h/brates.h.
 **
 ** The rest of the data fields contain approximations to the Cirrus registers
 ** that are used to program number of bits etc. Each registers bit fields is
 ** defined in cirrus.h.
 **
 ** NB. Only use those bits that are defined as being driver specific
 ** or common to the RTA and the driver.
 **
 ** All commands going from RTA->Host will be dealt with by the Host code - you
 ** will never see them. As with the SI there will be three fields to look out
 ** for in each phb (not yet defined - needs defining a.s.a.p).
 **
 ** modem_status	- current state of handshake pins.
 **
 ** port_status	 - current port status - equivalent to hi_stat for SI, indicates
 ** if port is IDLE_OPEN, IDLE_CLOSED etc.
 **
 ** break_status	- bit X set if break has been received.
 **
 ** Happy hacking.
 **
 */

 /*
 ** RIOParam is used to open or configure a port. You pass it a PortP,
 ** which will have a tty struct attached to it. You also pass a command,
 ** either OPEN or CONFIG. The port's setup is taken from the t_ fields
 ** of the tty struct inside the PortP, and the port is either opened
 ** or re-configured. You must also tell RIOParam if the device is a modem
 ** device or not (i.e. top bit of minor number set or clear - take special
 ** care when deciding on this!).
 ** RIOParam neither flushes nor waits for drain, and is NOT preemptive.
 **
 ** RIOParam assumes it will be called at splrio(), and also assumes
 ** that CookMode is set correctly in the port structure.
 **
 ** NB. for MPX
 **	tty lock must NOT have been previously acquired.
 */
 int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag)
 {
 	struct tty_struct *TtyP;
 	int retval;
 	struct phb_param __iomem *phb_param_ptr;
 	struct PKT __iomem *PacketP;
 	int res;
 	u8 Cor1 = 0, Cor2 = 0, Cor4 = 0, Cor5 = 0;
 	u8 TxXon = 0, TxXoff = 0, RxXon = 0, RxXoff = 0;
 	u8 LNext = 0, TxBaud = 0, RxBaud = 0;
 	int retries = 0xff;
 	unsigned long flags;

 	func_enter();

 	TtyP = PortP->gs.port.tty;

 	rio_dprintk(RIO_DEBUG_PARAM, "RIOParam: Port:%d cmd:%d Modem:%d SleepFlag:%d Mapped: %d, tty=%p\n", PortP->PortNum, cmd, Modem, SleepFlag, PortP->Mapped, TtyP);

 	if (!TtyP) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Can't call rioparam with null tty.\n");

 		func_exit();

 		return RIO_FAIL;
 	}
 	rio_spin_lock_irqsave(&PortP->portSem, flags);

 	if (cmd == RIOC_OPEN) {
 		/*
 		 ** If the port is set to store or lock the parameters, and it is
 		 ** paramed with OPEN, we want to restore the saved port termio, but
 		 ** only if StoredTermio has been saved, i.e. NOT 1st open after reboot.
 		 */
 	}

 	/*
 	 ** wait for space
 	 */
 	while (!(res = can_add_transmit(&PacketP, PortP)) || (PortP->InUse != NOT_INUSE)) {
 		if (retries-- <= 0) {
 			break;
 		}
 		if (PortP->InUse != NOT_INUSE) {
 			rio_dprintk(RIO_DEBUG_PARAM, "Port IN_USE for pre-emptive command\n");
 		}

 		if (!res) {
 			rio_dprintk(RIO_DEBUG_PARAM, "Port has no space on transmit queue\n");
 		}

 		if (SleepFlag != OK_TO_SLEEP) {
 			rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 			func_exit();

 			return RIO_FAIL;
 		}

 		rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit\n");
 		rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 		retval = RIODelay(PortP, HUNDRED_MS);
 		rio_spin_lock_irqsave(&PortP->portSem, flags);
 		if (retval == RIO_FAIL) {
 			rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit broken by signal\n");
 			rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 			func_exit();
 			return -EINTR;
 		}
 		if (PortP->State & RIO_DELETED) {
 			rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 			func_exit();
 			return 0;
 		}
 	}

 	if (!res) {
 		rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 		func_exit();

 		return RIO_FAIL;
 	}

 	rio_dprintk(RIO_DEBUG_PARAM, "can_add_transmit() returns %x\n", res);
 	rio_dprintk(RIO_DEBUG_PARAM, "Packet is %p\n", PacketP);

 	phb_param_ptr = (struct phb_param __iomem *) PacketP->data;


 	switch (TtyP->termios->c_cflag & CSIZE) {
 	case CS5:
 		{
 			rio_dprintk(RIO_DEBUG_PARAM, "5 bit data\n");
 			Cor1 |= RIOC_COR1_5BITS;
 			break;
 		}
 	case CS6:
 		{
 			rio_dprintk(RIO_DEBUG_PARAM, "6 bit data\n");
 			Cor1 |= RIOC_COR1_6BITS;
 			break;
 		}
 	case CS7:
 		{
 			rio_dprintk(RIO_DEBUG_PARAM, "7 bit data\n");
 			Cor1 |= RIOC_COR1_7BITS;
 			break;
 		}
 	case CS8:
 		{
 			rio_dprintk(RIO_DEBUG_PARAM, "8 bit data\n");
 			Cor1 |= RIOC_COR1_8BITS;
 			break;
 		}
 	}

 	if (TtyP->termios->c_cflag & CSTOPB) {
 		rio_dprintk(RIO_DEBUG_PARAM, "2 stop bits\n");
 		Cor1 |= RIOC_COR1_2STOP;
 	} else {
 		rio_dprintk(RIO_DEBUG_PARAM, "1 stop bit\n");
 		Cor1 |= RIOC_COR1_1STOP;
 	}

 	if (TtyP->termios->c_cflag & PARENB) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Enable parity\n");
 		Cor1 |= RIOC_COR1_NORMAL;
 	} else {
 		rio_dprintk(RIO_DEBUG_PARAM, "Disable parity\n");
 		Cor1 |= RIOC_COR1_NOP;
 	}
 	if (TtyP->termios->c_cflag & PARODD) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Odd parity\n");
 		Cor1 |= RIOC_COR1_ODD;
 	} else {
 		rio_dprintk(RIO_DEBUG_PARAM, "Even parity\n");
 		Cor1 |= RIOC_COR1_EVEN;
 	}

 	/*
 	 ** COR 2
 	 */
 	if (TtyP->termios->c_iflag & IXON) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop output control\n");
 		Cor2 |= RIOC_COR2_IXON;
 	} else {
 		if (PortP->Config & RIO_IXON) {
 			rio_dprintk(RIO_DEBUG_PARAM, "Force enable start/stop output control\n");
 			Cor2 |= RIOC_COR2_IXON;
 		} else
 			rio_dprintk(RIO_DEBUG_PARAM, "IXON has been disabled.\n");
 	}

 	if (TtyP->termios->c_iflag & IXANY) {
 		if (PortP->Config & RIO_IXANY) {
 			rio_dprintk(RIO_DEBUG_PARAM, "Enable any key to restart output\n");
 			Cor2 |= RIOC_COR2_IXANY;
 		} else
 			rio_dprintk(RIO_DEBUG_PARAM, "IXANY has been disabled due to sanity reasons.\n");
 	}

 	if (TtyP->termios->c_iflag & IXOFF) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop input control 2\n");
 		Cor2 |= RIOC_COR2_IXOFF;
 	}

 	if (TtyP->termios->c_cflag & HUPCL) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Hangup on last close\n");
 		Cor2 |= RIOC_COR2_HUPCL;
 	}

 	if (C_CRTSCTS(TtyP)) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control enabled\n");
 		Cor2 |= RIOC_COR2_CTSFLOW;
 		Cor2 |= RIOC_COR2_RTSFLOW;
 	} else {
 		rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control disabled\n");
 		Cor2 &= ~RIOC_COR2_CTSFLOW;
 		Cor2 &= ~RIOC_COR2_RTSFLOW;
 	}


 	if (TtyP->termios->c_cflag & CLOCAL) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Local line\n");
 	} else {
 		rio_dprintk(RIO_DEBUG_PARAM, "Possible Modem line\n");
 	}

 	/*
 	 ** COR 4 (there is no COR 3)
 	 */
 	if (TtyP->termios->c_iflag & IGNBRK) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Ignore break condition\n");
 		Cor4 |= RIOC_COR4_IGNBRK;
 	}
 	if (!(TtyP->termios->c_iflag & BRKINT)) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Break generates NULL condition\n");
 		Cor4 |= RIOC_COR4_NBRKINT;
 	} else {
 		rio_dprintk(RIO_DEBUG_PARAM, "Interrupt on	break condition\n");
 	}

 	if (TtyP->termios->c_iflag & INLCR) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage return on input\n");
 		Cor4 |= RIOC_COR4_INLCR;
 	}

 	if (TtyP->termios->c_iflag & IGNCR) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Ignore carriage return on input\n");
 		Cor4 |= RIOC_COR4_IGNCR;
 	}

 	if (TtyP->termios->c_iflag & ICRNL) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on input\n");
 		Cor4 |= RIOC_COR4_ICRNL;
 	}
 	if (TtyP->termios->c_iflag & IGNPAR) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Ignore characters with parity errors\n");
 		Cor4 |= RIOC_COR4_IGNPAR;
 	}
 	if (TtyP->termios->c_iflag & PARMRK) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Mark parity errors\n");
 		Cor4 |= RIOC_COR4_PARMRK;
 	}

 	/*
 	 ** Set the RAISEMOD flag to ensure that the modem lines are raised
 	 ** on reception of a config packet.
 	 ** The download code handles the zero baud condition.
 	 */
 	Cor4 |= RIOC_COR4_RAISEMOD;

 	/*
 	 ** COR 5
 	 */

 	Cor5 = RIOC_COR5_CMOE;

 	/*
 	 ** Set to monitor tbusy/tstop (or not).
 	 */

 	if (PortP->MonitorTstate)
 		Cor5 |= RIOC_COR5_TSTATE_ON;
 	else
 		Cor5 |= RIOC_COR5_TSTATE_OFF;

 	/*
 	 ** Could set LNE here if you wanted LNext processing. SVR4 will use it.
 	 */
 	if (TtyP->termios->c_iflag & ISTRIP) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Strip input characters\n");
 		if (!(PortP->State & RIO_TRIAD_MODE)) {
 			Cor5 |= RIOC_COR5_ISTRIP;
 		}
 	}

 	if (TtyP->termios->c_oflag & ONLCR) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage-return, newline on output\n");
 		if (PortP->CookMode == COOK_MEDIUM)
 			Cor5 |= RIOC_COR5_ONLCR;
 	}
 	if (TtyP->termios->c_oflag & OCRNL) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on output\n");
 		if (PortP->CookMode == COOK_MEDIUM)
 			Cor5 |= RIOC_COR5_OCRNL;
 	}
 	if ((TtyP->termios->c_oflag & TABDLY) == TAB3) {
 		rio_dprintk(RIO_DEBUG_PARAM, "Tab delay 3 set\n");
 		if (PortP->CookMode == COOK_MEDIUM)
 			Cor5 |= RIOC_COR5_TAB3;
 	}

 	/*
 	 ** Flow control bytes.
 	 */
 	TxXon = TtyP->termios->c_cc[VSTART];
 	TxXoff = TtyP->termios->c_cc[VSTOP];
 	RxXon = TtyP->termios->c_cc[VSTART];
 	RxXoff = TtyP->termios->c_cc[VSTOP];
 	/*
 	 ** LNEXT byte
 	 */
 	LNext = 0;

 	/*
 	 ** Baud rate bytes
 	 */
 	rio_dprintk(RIO_DEBUG_PARAM, "Mapping of rx/tx baud %x (%x)\n", TtyP->termios->c_cflag, CBAUD);

 	switch (TtyP->termios->c_cflag & CBAUD) {
 #define e(b) case B ## b : RxBaud = TxBaud = RIO_B ## b ;break
 		e(50);
 		e(75);
 		e(110);
 		e(134);
 		e(150);
 		e(200);
 		e(300);
 		e(600);
 		e(1200);
 		e(1800);
 		e(2400);
 		e(4800);
 		e(9600);
 		e(19200);
 		e(38400);
 		e(57600);
 		e(115200);	/* e(230400);e(460800); e(921600);  */
 	}

 	rio_dprintk(RIO_DEBUG_PARAM, "tx baud 0x%x, rx baud 0x%x\n", TxBaud, RxBaud);


 	/*
 	 ** Leftovers
 	 */
 	if (TtyP->termios->c_cflag & CREAD)
 		rio_dprintk(RIO_DEBUG_PARAM, "Enable receiver\n");
 #ifdef RCV1EN
 	if (TtyP->termios->c_cflag & RCV1EN)
 		rio_dprintk(RIO_DEBUG_PARAM, "RCV1EN (?)\n");
 #endif
 #ifdef XMT1EN
 	if (TtyP->termios->c_cflag & XMT1EN)
 		rio_dprintk(RIO_DEBUG_PARAM, "XMT1EN (?)\n");
 #endif
 	if (TtyP->termios->c_lflag & ISIG)
 		rio_dprintk(RIO_DEBUG_PARAM, "Input character signal generating enabled\n");
 	if (TtyP->termios->c_lflag & ICANON)
 		rio_dprintk(RIO_DEBUG_PARAM, "Canonical input: erase and kill enabled\n");
 	if (TtyP->termios->c_lflag & XCASE)
 		rio_dprintk(RIO_DEBUG_PARAM, "Canonical upper/lower presentation\n");
 	if (TtyP->termios->c_lflag & ECHO)
 		rio_dprintk(RIO_DEBUG_PARAM, "Enable input echo\n");
 	if (TtyP->termios->c_lflag & ECHOE)
 		rio_dprintk(RIO_DEBUG_PARAM, "Enable echo erase\n");
 	if (TtyP->termios->c_lflag & ECHOK)
 		rio_dprintk(RIO_DEBUG_PARAM, "Enable echo kill\n");
 	if (TtyP->termios->c_lflag & ECHONL)
 		rio_dprintk(RIO_DEBUG_PARAM, "Enable echo newline\n");
 	if (TtyP->termios->c_lflag & NOFLSH)
 		rio_dprintk(RIO_DEBUG_PARAM, "Disable flush after interrupt or quit\n");
 #ifdef TOSTOP
 	if (TtyP->termios->c_lflag & TOSTOP)
 		rio_dprintk(RIO_DEBUG_PARAM, "Send SIGTTOU for background output\n");
 #endif
 #ifdef XCLUDE
 	if (TtyP->termios->c_lflag & XCLUDE)
 		rio_dprintk(RIO_DEBUG_PARAM, "Exclusive use of this line\n");
 #endif
 	if (TtyP->termios->c_iflag & IUCLC)
 		rio_dprintk(RIO_DEBUG_PARAM, "Map uppercase to lowercase on input\n");
 	if (TtyP->termios->c_oflag & OPOST)
 		rio_dprintk(RIO_DEBUG_PARAM, "Enable output post-processing\n");
 	if (TtyP->termios->c_oflag & OLCUC)
 		rio_dprintk(RIO_DEBUG_PARAM, "Map lowercase to uppercase on output\n");
 	if (TtyP->termios->c_oflag & ONOCR)
 		rio_dprintk(RIO_DEBUG_PARAM, "No carriage return output at column 0\n");
 	if (TtyP->termios->c_oflag & ONLRET)
 		rio_dprintk(RIO_DEBUG_PARAM, "Newline performs carriage return function\n");
 	if (TtyP->termios->c_oflag & OFILL)
 		rio_dprintk(RIO_DEBUG_PARAM, "Use fill characters for delay\n");
 	if (TtyP->termios->c_oflag & OFDEL)
 		rio_dprintk(RIO_DEBUG_PARAM, "Fill character is DEL\n");
 	if (TtyP->termios->c_oflag & NLDLY)
 		rio_dprintk(RIO_DEBUG_PARAM, "Newline delay set\n");
 	if (TtyP->termios->c_oflag & CRDLY)
 		rio_dprintk(RIO_DEBUG_PARAM, "Carriage return delay set\n");
 	if (TtyP->termios->c_oflag & TABDLY)
 		rio_dprintk(RIO_DEBUG_PARAM, "Tab delay set\n");
 	/*
 	 ** These things are kind of useful in a later life!
 	 */
 	PortP->Cor2Copy = Cor2;

 	if (PortP->State & RIO_DELETED) {
 		rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 		func_exit();

 		return RIO_FAIL;
 	}

 	/*
 	 ** Actually write the info into the packet to be sent
 	 */
 	writeb(cmd, &phb_param_ptr->Cmd);
 	writeb(Cor1, &phb_param_ptr->Cor1);
 	writeb(Cor2, &phb_param_ptr->Cor2);
 	writeb(Cor4, &phb_param_ptr->Cor4);
 	writeb(Cor5, &phb_param_ptr->Cor5);
 	writeb(TxXon, &phb_param_ptr->TxXon);
 	writeb(RxXon, &phb_param_ptr->RxXon);
 	writeb(TxXoff, &phb_param_ptr->TxXoff);
 	writeb(RxXoff, &phb_param_ptr->RxXoff);
 	writeb(LNext, &phb_param_ptr->LNext);
 	writeb(TxBaud, &phb_param_ptr->TxBaud);
 	writeb(RxBaud, &phb_param_ptr->RxBaud);

 	/*
 	 ** Set the length/command field
 	 */
 	writeb(12 | PKT_CMD_BIT, &PacketP->len);

 	/*
 	 ** The packet is formed - now, whack it off
 	 ** to its final destination:
 	 */
 	add_transmit(PortP);
 	/*
 	 ** Count characters transmitted for port statistics reporting
 	 */
 	if (PortP->statsGather)
 		PortP->txchars += 12;

 	rio_spin_unlock_irqrestore(&PortP->portSem, flags);

 	rio_dprintk(RIO_DEBUG_PARAM, "add_transmit returned.\n");
 	/*
 	 ** job done.
 	 */
 	func_exit();

 	return 0;
 }


 /*
 ** We can add another packet to a transmit queue if the packet pointer pointed
 ** to by the TxAdd pointer has PKT_IN_USE clear in its address.
 */
 int can_add_transmit(struct PKT __iomem **PktP, struct Port *PortP)
 {
 	struct PKT __iomem *tp;

 	*PktP = tp = (struct PKT __iomem *) RIO_PTR(PortP->Caddr, readw(PortP->TxAdd));

 	return !((unsigned long) tp & PKT_IN_USE);
 }

 /*
 ** To add a packet to the queue, you set the PKT_IN_USE bit in the address,
 ** and then move the TxAdd pointer along one position to point to the next
 ** packet pointer. You must wrap the pointer from the end back to the start.
 */
 void add_transmit(struct Port *PortP)
 {
 	if (readw(PortP->TxAdd) & PKT_IN_USE) {
 		rio_dprintk(RIO_DEBUG_PARAM, "add_transmit: Packet has been stolen!");
 	}
 	writew(readw(PortP->TxAdd) | PKT_IN_USE, PortP->TxAdd);
 	PortP->TxAdd = (PortP->TxAdd == PortP->TxEnd) ? PortP->TxStart : PortP->TxAdd + 1;
 	writew(RIO_OFF(PortP->Caddr, PortP->TxAdd), &PortP->PhbP->tx_add);
 }

 /****************************************
  * Put a packet onto the end of the
  * free list
  ****************************************/
 void put_free_end(struct Host *HostP, struct PKT __iomem *PktP)
 {
 	struct rio_free_list __iomem *tmp_pointer;
 	unsigned short old_end, new_end;
 	unsigned long flags;

 	rio_spin_lock_irqsave(&HostP->HostLock, flags);

 	 /*************************************************
 	* Put a packet back onto the back of the free list
 	*
 	************************************************/

 	rio_dprintk(RIO_DEBUG_PFE, "put_free_end(PktP=%p)\n", PktP);

 	if ((old_end = readw(&HostP->ParmMapP->free_list_end)) != TPNULL) {
 		new_end = RIO_OFF(HostP->Caddr, PktP);
 		tmp_pointer = (struct rio_free_list __iomem *) RIO_PTR(HostP->Caddr, old_end);
 		writew(new_end, &tmp_pointer->next);
 		writew(old_end, &((struct rio_free_list __iomem *) PktP)->prev);
 		writew(TPNULL, &((struct rio_free_list __iomem *) PktP)->next);
 		writew(new_end, &HostP->ParmMapP->free_list_end);
 	} else {		/* First packet on the free list this should never happen! */
 		rio_dprintk(RIO_DEBUG_PFE, "put_free_end(): This should never happen\n");
 		writew(RIO_OFF(HostP->Caddr, PktP), &HostP->ParmMapP->free_list_end);
 		tmp_pointer = (struct rio_free_list __iomem *) PktP;
 		writew(TPNULL, &tmp_pointer->prev);
 		writew(TPNULL, &tmp_pointer->next);
 	}
 	rio_dprintk(RIO_DEBUG_CMD, "Before unlock: %p\n", &HostP->HostLock);
 	rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
 }

 /*
 ** can_remove_receive(PktP,P) returns non-zero if PKT_IN_USE is set
 ** for the next packet on the queue. It will also set PktP to point to the
 ** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear,
 ** then can_remove_receive() returns 0.
 */
 int can_remove_receive(struct PKT __iomem **PktP, struct Port *PortP)
 {
 	if (readw(PortP->RxRemove) & PKT_IN_USE) {
 		*PktP = (struct PKT __iomem *) RIO_PTR(PortP->Caddr, readw(PortP->RxRemove) & ~PKT_IN_USE);
 		return 1;
 	}
 	return 0;
 }

 /*
 ** To remove a packet from the receive queue you clear its PKT_IN_USE bit,
 ** and then bump the pointers. Once the pointers get to the end, they must
 ** be wrapped back to the start.
 */
 void remove_receive(struct Port *PortP)
 {
 	writew(readw(PortP->RxRemove) & ~PKT_IN_USE, PortP->RxRemove);
 	PortP->RxRemove = (PortP->RxRemove == PortP->RxEnd) ? PortP->RxStart : PortP->RxRemove + 1;
 	writew(RIO_OFF(PortP->Caddr, PortP->RxRemove), &PortP->PhbP->rx_remove);
 }
	/*
	** -----------------------------------------------------------------------------
	**
	** Perle Specialix driver for Linux
	** Ported from existing RIO Driver for SCO sources.
	*
	* (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	**
	** Module : rioparam.c
	** SID : 1.3
	** Last Modified : 11/6/98 10:33:45
	** Retrieved : 11/6/98 10:33:50
	**
	** ident @(#)rioparam.c 1.3
	**
	** -----------------------------------------------------------------------------
	*/

	#include <linux/module.h>
	#include <linux/slab.h>
	#include <linux/errno.h>
	#include <linux/tty.h>
	#include <asm/io.h>
	#include <asm/system.h>
	#include <asm/string.h>
	#include <asm/uaccess.h>

	#include <linux/termios.h>
	#include <linux/serial.h>

	#include <linux/generic_serial.h>


	#include "linux_compat.h"
	#include "rio_linux.h"
	#include "pkt.h"
	#include "daemon.h"
	#include "rio.h"
	#include "riospace.h"
	#include "cmdpkt.h"
	#include "map.h"
	#include "rup.h"
	#include "port.h"
	#include "riodrvr.h"
	#include "rioinfo.h"
	#include "func.h"
	#include "errors.h"
	#include "pci.h"

	#include "parmmap.h"
	#include "unixrup.h"
	#include "board.h"
	#include "host.h"
	#include "phb.h"
	#include "link.h"
	#include "cmdblk.h"
	#include "route.h"
	#include "cirrus.h"
	#include "rioioctl.h"
	#include "param.h"



	/*
	** The Scam, based on email from jeremyr@bugs.specialix.co.uk....
	**
	** To send a command on a particular port, you put a packet with the
	** command bit set onto the port. The command bit is in the len field,
	** and gets ORed in with the actual byte count.
	**
	** When you send a packet with the command bit set the first
	** data byte (data[0]) is interpreted as the command to execute.
	** It also governs what data structure overlay should accompany the packet.
	** Commands are defined in cirrus/cirrus.h
	**
	** If you want the command to pre-emt data already on the queue for the
	** port, set the pre-emptive bit in conjunction with the command bit.
	** It is not defined what will happen if you set the preemptive bit
	** on a packet that is NOT a command.
	**
	** Pre-emptive commands should be queued at the head of the queue using
	** add_start(), whereas normal commands and data are enqueued using
	** add_end().
	**
	** Most commands do not use the remaining bytes in the data array. The
	** exceptions are OPEN MOPEN and CONFIG. (NB. As with the SI CONFIG and
	** OPEN are currently analogous). With these three commands the following
	** 11 data bytes are all used to pass config information such as baud rate etc.
	** The fields are also defined in cirrus.h. Some contain straightforward
	** information such as the transmit XON character. Two contain the transmit and
	** receive baud rates respectively. For most baud rates there is a direct
	** mapping between the rates defined in <sys/termio.h> and the byte in the
	** packet. There are additional (non UNIX-standard) rates defined in
	** /u/dos/rio/cirrus/h/brates.h.
	**
	** The rest of the data fields contain approximations to the Cirrus registers
	** that are used to program number of bits etc. Each registers bit fields is
	** defined in cirrus.h.
	**
	** NB. Only use those bits that are defined as being driver specific
	** or common to the RTA and the driver.
	**
	** All commands going from RTA->Host will be dealt with by the Host code - you
	** will never see them. As with the SI there will be three fields to look out
	** for in each phb (not yet defined - needs defining a.s.a.p).
	**
	** modem_status - current state of handshake pins.
	**
	** port_status - current port status - equivalent to hi_stat for SI, indicates
	** if port is IDLE_OPEN, IDLE_CLOSED etc.
	**
	** break_status - bit X set if break has been received.
	**
	** Happy hacking.
	**
	*/

	/*
	** RIOParam is used to open or configure a port. You pass it a PortP,
	** which will have a tty struct attached to it. You also pass a command,
	** either OPEN or CONFIG. The port's setup is taken from the t_ fields
	** of the tty struct inside the PortP, and the port is either opened
	** or re-configured. You must also tell RIOParam if the device is a modem
	** device or not (i.e. top bit of minor number set or clear - take special
	** care when deciding on this!).
	** RIOParam neither flushes nor waits for drain, and is NOT preemptive.
	**
	** RIOParam assumes it will be called at splrio(), and also assumes
	** that CookMode is set correctly in the port structure.
	**
	** NB. for MPX
	** tty lock must NOT have been previously acquired.
	*/
	int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag)
	{
	struct tty_struct *TtyP;
	int retval;
	struct phb_param __iomem *phb_param_ptr;
	struct PKT __iomem *PacketP;
	int res;
	u8 Cor1 = 0, Cor2 = 0, Cor4 = 0, Cor5 = 0;
	u8 TxXon = 0, TxXoff = 0, RxXon = 0, RxXoff = 0;
	u8 LNext = 0, TxBaud = 0, RxBaud = 0;
	int retries = 0xff;
	unsigned long flags;

	func_enter();

	TtyP = PortP->gs.port.tty;

	rio_dprintk(RIO_DEBUG_PARAM, "RIOParam: Port:%d cmd:%d Modem:%d SleepFlag:%d Mapped: %d, tty=%p\n", PortP->PortNum, cmd, Modem, SleepFlag, PortP->Mapped, TtyP);

	if (!TtyP) {
	rio_dprintk(RIO_DEBUG_PARAM, "Can't call rioparam with null tty.\n");

	func_exit();

	return RIO_FAIL;
	}
	rio_spin_lock_irqsave(&PortP->portSem, flags);

	if (cmd == RIOC_OPEN) {
	/*
	** If the port is set to store or lock the parameters, and it is
	** paramed with OPEN, we want to restore the saved port termio, but
	** only if StoredTermio has been saved, i.e. NOT 1st open after reboot.
	*/
	}

	/*
	** wait for space
	*/
	while (!(res = can_add_transmit(&PacketP, PortP)) \|\| (PortP->InUse != NOT_INUSE)) {
	if (retries-- <= 0) {
	break;
	}
	if (PortP->InUse != NOT_INUSE) {
	rio_dprintk(RIO_DEBUG_PARAM, "Port IN_USE for pre-emptive command\n");
	}

	if (!res) {
	rio_dprintk(RIO_DEBUG_PARAM, "Port has no space on transmit queue\n");
	}

	if (SleepFlag != OK_TO_SLEEP) {
	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
	func_exit();

	return RIO_FAIL;
	}

	rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit\n");
	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
	retval = RIODelay(PortP, HUNDRED_MS);
	rio_spin_lock_irqsave(&PortP->portSem, flags);
	if (retval == RIO_FAIL) {
	rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit broken by signal\n");
	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
	func_exit();
	return -EINTR;
	}
	if (PortP->State & RIO_DELETED) {
	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
	func_exit();
	return 0;
	}
	}

	if (!res) {
	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
	func_exit();

	return RIO_FAIL;
	}

	rio_dprintk(RIO_DEBUG_PARAM, "can_add_transmit() returns %x\n", res);
	rio_dprintk(RIO_DEBUG_PARAM, "Packet is %p\n", PacketP);

	phb_param_ptr = (struct phb_param __iomem *) PacketP->data;


	switch (TtyP->termios->c_cflag & CSIZE) {
	case CS5:
	{
	rio_dprintk(RIO_DEBUG_PARAM, "5 bit data\n");
	Cor1 \|= RIOC_COR1_5BITS;
	break;
	}
	case CS6:
	{
	rio_dprintk(RIO_DEBUG_PARAM, "6 bit data\n");
	Cor1 \|= RIOC_COR1_6BITS;
	break;
	}
	case CS7:
	{
	rio_dprintk(RIO_DEBUG_PARAM, "7 bit data\n");
	Cor1 \|= RIOC_COR1_7BITS;
	break;
	}
	case CS8:
	{
	rio_dprintk(RIO_DEBUG_PARAM, "8 bit data\n");
	Cor1 \|= RIOC_COR1_8BITS;
	break;
	}
	}

	if (TtyP->termios->c_cflag & CSTOPB) {
	rio_dprintk(RIO_DEBUG_PARAM, "2 stop bits\n");
	Cor1 \|= RIOC_COR1_2STOP;
	} else {
	rio_dprintk(RIO_DEBUG_PARAM, "1 stop bit\n");
	Cor1 \|= RIOC_COR1_1STOP;
	}

	if (TtyP->termios->c_cflag & PARENB) {
	rio_dprintk(RIO_DEBUG_PARAM, "Enable parity\n");
	Cor1 \|= RIOC_COR1_NORMAL;
	} else {
	rio_dprintk(RIO_DEBUG_PARAM, "Disable parity\n");
	Cor1 \|= RIOC_COR1_NOP;
	}
	if (TtyP->termios->c_cflag & PARODD) {
	rio_dprintk(RIO_DEBUG_PARAM, "Odd parity\n");
	Cor1 \|= RIOC_COR1_ODD;
	} else {
	rio_dprintk(RIO_DEBUG_PARAM, "Even parity\n");
	Cor1 \|= RIOC_COR1_EVEN;
	}

	/*
	** COR 2
	*/
	if (TtyP->termios->c_iflag & IXON) {
	rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop output control\n");
	Cor2 \|= RIOC_COR2_IXON;
	} else {
	if (PortP->Config & RIO_IXON) {
	rio_dprintk(RIO_DEBUG_PARAM, "Force enable start/stop output control\n");
	Cor2 \|= RIOC_COR2_IXON;
	} else
	rio_dprintk(RIO_DEBUG_PARAM, "IXON has been disabled.\n");
	}

	if (TtyP->termios->c_iflag & IXANY) {
	if (PortP->Config & RIO_IXANY) {
	rio_dprintk(RIO_DEBUG_PARAM, "Enable any key to restart output\n");
	Cor2 \|= RIOC_COR2_IXANY;
	} else
	rio_dprintk(RIO_DEBUG_PARAM, "IXANY has been disabled due to sanity reasons.\n");
	}

	if (TtyP->termios->c_iflag & IXOFF) {
	rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop input control 2\n");
	Cor2 \|= RIOC_COR2_IXOFF;
	}

	if (TtyP->termios->c_cflag & HUPCL) {
	rio_dprintk(RIO_DEBUG_PARAM, "Hangup on last close\n");
	Cor2 \|= RIOC_COR2_HUPCL;
	}

	if (C_CRTSCTS(TtyP)) {
	rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control enabled\n");
	Cor2 \|= RIOC_COR2_CTSFLOW;
	Cor2 \|= RIOC_COR2_RTSFLOW;
	} else {
	rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control disabled\n");
	Cor2 &= ~RIOC_COR2_CTSFLOW;
	Cor2 &= ~RIOC_COR2_RTSFLOW;
	}


	if (TtyP->termios->c_cflag & CLOCAL) {
	rio_dprintk(RIO_DEBUG_PARAM, "Local line\n");
	} else {
	rio_dprintk(RIO_DEBUG_PARAM, "Possible Modem line\n");
	}

	/*
	** COR 4 (there is no COR 3)
	*/
	if (TtyP->termios->c_iflag & IGNBRK) {
	rio_dprintk(RIO_DEBUG_PARAM, "Ignore break condition\n");
	Cor4 \|= RIOC_COR4_IGNBRK;
	}
	if (!(TtyP->termios->c_iflag & BRKINT)) {
	rio_dprintk(RIO_DEBUG_PARAM, "Break generates NULL condition\n");
	Cor4 \|= RIOC_COR4_NBRKINT;
	} else {
	rio_dprintk(RIO_DEBUG_PARAM, "Interrupt on break condition\n");
	}

	if (TtyP->termios->c_iflag & INLCR) {
	rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage return on input\n");
	Cor4 \|= RIOC_COR4_INLCR;
	}

	if (TtyP->termios->c_iflag & IGNCR) {
	rio_dprintk(RIO_DEBUG_PARAM, "Ignore carriage return on input\n");
	Cor4 \|= RIOC_COR4_IGNCR;
	}

	if (TtyP->termios->c_iflag & ICRNL) {
	rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on input\n");
	Cor4 \|= RIOC_COR4_ICRNL;
	}
	if (TtyP->termios->c_iflag & IGNPAR) {
	rio_dprintk(RIO_DEBUG_PARAM, "Ignore characters with parity errors\n");
	Cor4 \|= RIOC_COR4_IGNPAR;
	}
	if (TtyP->termios->c_iflag & PARMRK) {
	rio_dprintk(RIO_DEBUG_PARAM, "Mark parity errors\n");
	Cor4 \|= RIOC_COR4_PARMRK;
	}

	/*
	** Set the RAISEMOD flag to ensure that the modem lines are raised
	** on reception of a config packet.
	** The download code handles the zero baud condition.
	*/
	Cor4 \|= RIOC_COR4_RAISEMOD;

	/*
	** COR 5
	*/

	Cor5 = RIOC_COR5_CMOE;

	/*
	** Set to monitor tbusy/tstop (or not).
	*/

	if (PortP->MonitorTstate)
	Cor5 \|= RIOC_COR5_TSTATE_ON;
	else
	Cor5 \|= RIOC_COR5_TSTATE_OFF;

	/*
	** Could set LNE here if you wanted LNext processing. SVR4 will use it.
	*/
	if (TtyP->termios->c_iflag & ISTRIP) {
	rio_dprintk(RIO_DEBUG_PARAM, "Strip input characters\n");
	if (!(PortP->State & RIO_TRIAD_MODE)) {
	Cor5 \|= RIOC_COR5_ISTRIP;
	}
	}

	if (TtyP->termios->c_oflag & ONLCR) {
	rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage-return, newline on output\n");
	if (PortP->CookMode == COOK_MEDIUM)
	Cor5 \|= RIOC_COR5_ONLCR;
	}
	if (TtyP->termios->c_oflag & OCRNL) {
	rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on output\n");
	if (PortP->CookMode == COOK_MEDIUM)
	Cor5 \|= RIOC_COR5_OCRNL;
	}
	if ((TtyP->termios->c_oflag & TABDLY) == TAB3) {
	rio_dprintk(RIO_DEBUG_PARAM, "Tab delay 3 set\n");
	if (PortP->CookMode == COOK_MEDIUM)
	Cor5 \|= RIOC_COR5_TAB3;
	}

	/*
	** Flow control bytes.
	*/
	TxXon = TtyP->termios->c_cc[VSTART];
	TxXoff = TtyP->termios->c_cc[VSTOP];
	RxXon = TtyP->termios->c_cc[VSTART];
	RxXoff = TtyP->termios->c_cc[VSTOP];
	/*
	** LNEXT byte
	*/
	LNext = 0;

	/*
	** Baud rate bytes
	*/
	rio_dprintk(RIO_DEBUG_PARAM, "Mapping of rx/tx baud %x (%x)\n", TtyP->termios->c_cflag, CBAUD);

	switch (TtyP->termios->c_cflag & CBAUD) {
	#define e(b) case B ## b : RxBaud = TxBaud = RIO_B ## b ;break
	e(50);
	e(75);
	e(110);
	e(134);
	e(150);
	e(200);
	e(300);
	e(600);
	e(1200);
	e(1800);
	e(2400);
	e(4800);
	e(9600);
	e(19200);
	e(38400);
	e(57600);
	e(115200); /* e(230400);e(460800); e(921600); */
	}

	rio_dprintk(RIO_DEBUG_PARAM, "tx baud 0x%x, rx baud 0x%x\n", TxBaud, RxBaud);


	/*
	** Leftovers
	*/
	if (TtyP->termios->c_cflag & CREAD)
	rio_dprintk(RIO_DEBUG_PARAM, "Enable receiver\n");
	#ifdef RCV1EN
	if (TtyP->termios->c_cflag & RCV1EN)
	rio_dprintk(RIO_DEBUG_PARAM, "RCV1EN (?)\n");
	#endif
	#ifdef XMT1EN
	if (TtyP->termios->c_cflag & XMT1EN)
	rio_dprintk(RIO_DEBUG_PARAM, "XMT1EN (?)\n");
	#endif
	if (TtyP->termios->c_lflag & ISIG)
	rio_dprintk(RIO_DEBUG_PARAM, "Input character signal generating enabled\n");
	if (TtyP->termios->c_lflag & ICANON)
	rio_dprintk(RIO_DEBUG_PARAM, "Canonical input: erase and kill enabled\n");
	if (TtyP->termios->c_lflag & XCASE)
	rio_dprintk(RIO_DEBUG_PARAM, "Canonical upper/lower presentation\n");
	if (TtyP->termios->c_lflag & ECHO)
	rio_dprintk(RIO_DEBUG_PARAM, "Enable input echo\n");
	if (TtyP->termios->c_lflag & ECHOE)
	rio_dprintk(RIO_DEBUG_PARAM, "Enable echo erase\n");
	if (TtyP->termios->c_lflag & ECHOK)
	rio_dprintk(RIO_DEBUG_PARAM, "Enable echo kill\n");
	if (TtyP->termios->c_lflag & ECHONL)
	rio_dprintk(RIO_DEBUG_PARAM, "Enable echo newline\n");
	if (TtyP->termios->c_lflag & NOFLSH)
	rio_dprintk(RIO_DEBUG_PARAM, "Disable flush after interrupt or quit\n");
	#ifdef TOSTOP
	if (TtyP->termios->c_lflag & TOSTOP)
	rio_dprintk(RIO_DEBUG_PARAM, "Send SIGTTOU for background output\n");
	#endif
	#ifdef XCLUDE
	if (TtyP->termios->c_lflag & XCLUDE)
	rio_dprintk(RIO_DEBUG_PARAM, "Exclusive use of this line\n");
	#endif
	if (TtyP->termios->c_iflag & IUCLC)
	rio_dprintk(RIO_DEBUG_PARAM, "Map uppercase to lowercase on input\n");
	if (TtyP->termios->c_oflag & OPOST)
	rio_dprintk(RIO_DEBUG_PARAM, "Enable output post-processing\n");
	if (TtyP->termios->c_oflag & OLCUC)
	rio_dprintk(RIO_DEBUG_PARAM, "Map lowercase to uppercase on output\n");
	if (TtyP->termios->c_oflag & ONOCR)
	rio_dprintk(RIO_DEBUG_PARAM, "No carriage return output at column 0\n");
	if (TtyP->termios->c_oflag & ONLRET)
	rio_dprintk(RIO_DEBUG_PARAM, "Newline performs carriage return function\n");
	if (TtyP->termios->c_oflag & OFILL)
	rio_dprintk(RIO_DEBUG_PARAM, "Use fill characters for delay\n");
	if (TtyP->termios->c_oflag & OFDEL)
	rio_dprintk(RIO_DEBUG_PARAM, "Fill character is DEL\n");
	if (TtyP->termios->c_oflag & NLDLY)
	rio_dprintk(RIO_DEBUG_PARAM, "Newline delay set\n");
	if (TtyP->termios->c_oflag & CRDLY)
	rio_dprintk(RIO_DEBUG_PARAM, "Carriage return delay set\n");
	if (TtyP->termios->c_oflag & TABDLY)
	rio_dprintk(RIO_DEBUG_PARAM, "Tab delay set\n");
	/*
	** These things are kind of useful in a later life!
	*/
	PortP->Cor2Copy = Cor2;

	if (PortP->State & RIO_DELETED) {
	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
	func_exit();

	return RIO_FAIL;
	}

	/*
	** Actually write the info into the packet to be sent
	*/
	writeb(cmd, &phb_param_ptr->Cmd);
	writeb(Cor1, &phb_param_ptr->Cor1);
	writeb(Cor2, &phb_param_ptr->Cor2);
	writeb(Cor4, &phb_param_ptr->Cor4);
	writeb(Cor5, &phb_param_ptr->Cor5);
	writeb(TxXon, &phb_param_ptr->TxXon);
	writeb(RxXon, &phb_param_ptr->RxXon);
	writeb(TxXoff, &phb_param_ptr->TxXoff);
	writeb(RxXoff, &phb_param_ptr->RxXoff);
	writeb(LNext, &phb_param_ptr->LNext);
	writeb(TxBaud, &phb_param_ptr->TxBaud);
	writeb(RxBaud, &phb_param_ptr->RxBaud);

	/*
	** Set the length/command field
	*/
	writeb(12 \| PKT_CMD_BIT, &PacketP->len);

	/*
	** The packet is formed - now, whack it off
	** to its final destination:
	*/
	add_transmit(PortP);
	/*
	** Count characters transmitted for port statistics reporting
	*/
	if (PortP->statsGather)
	PortP->txchars += 12;

	rio_spin_unlock_irqrestore(&PortP->portSem, flags);

	rio_dprintk(RIO_DEBUG_PARAM, "add_transmit returned.\n");
	/*
	** job done.
	*/
	func_exit();

	return 0;
	}


	/*
	** We can add another packet to a transmit queue if the packet pointer pointed
	** to by the TxAdd pointer has PKT_IN_USE clear in its address.
	*/
	int can_add_transmit(struct PKT __iomem *PktP, struct Port PortP)
	{
	struct PKT __iomem *tp;

	PktP = tp = (struct PKT __iomem ) RIO_PTR(PortP->Caddr, readw(PortP->TxAdd));

	return !((unsigned long) tp & PKT_IN_USE);
	}

	/*
	** To add a packet to the queue, you set the PKT_IN_USE bit in the address,
	** and then move the TxAdd pointer along one position to point to the next
	** packet pointer. You must wrap the pointer from the end back to the start.
	*/
	void add_transmit(struct Port *PortP)
	{
	if (readw(PortP->TxAdd) & PKT_IN_USE) {
	rio_dprintk(RIO_DEBUG_PARAM, "add_transmit: Packet has been stolen!");
	}
	writew(readw(PortP->TxAdd) \| PKT_IN_USE, PortP->TxAdd);
	PortP->TxAdd = (PortP->TxAdd == PortP->TxEnd) ? PortP->TxStart : PortP->TxAdd + 1;
	writew(RIO_OFF(PortP->Caddr, PortP->TxAdd), &PortP->PhbP->tx_add);
	}

	/****************************************
	* Put a packet onto the end of the
	* free list
	****************************************/
	void put_free_end(struct Host HostP, struct PKT __iomem PktP)
	{
	struct rio_free_list __iomem *tmp_pointer;
	unsigned short old_end, new_end;
	unsigned long flags;

	rio_spin_lock_irqsave(&HostP->HostLock, flags);

	/*************************************************
	* Put a packet back onto the back of the free list
	*
	************************************************/

	rio_dprintk(RIO_DEBUG_PFE, "put_free_end(PktP=%p)\n", PktP);

	if ((old_end = readw(&HostP->ParmMapP->free_list_end)) != TPNULL) {
	new_end = RIO_OFF(HostP->Caddr, PktP);
	tmp_pointer = (struct rio_free_list __iomem *) RIO_PTR(HostP->Caddr, old_end);
	writew(new_end, &tmp_pointer->next);
	writew(old_end, &((struct rio_free_list __iomem *) PktP)->prev);
	writew(TPNULL, &((struct rio_free_list __iomem *) PktP)->next);
	writew(new_end, &HostP->ParmMapP->free_list_end);
	} else { /* First packet on the free list this should never happen! */
	rio_dprintk(RIO_DEBUG_PFE, "put_free_end(): This should never happen\n");
	writew(RIO_OFF(HostP->Caddr, PktP), &HostP->ParmMapP->free_list_end);
	tmp_pointer = (struct rio_free_list __iomem *) PktP;
	writew(TPNULL, &tmp_pointer->prev);
	writew(TPNULL, &tmp_pointer->next);
	}
	rio_dprintk(RIO_DEBUG_CMD, "Before unlock: %p\n", &HostP->HostLock);
	rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
	}

	/*
	** can_remove_receive(PktP,P) returns non-zero if PKT_IN_USE is set
	** for the next packet on the queue. It will also set PktP to point to the
	** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear,
	** then can_remove_receive() returns 0.
	*/
	int can_remove_receive(struct PKT __iomem *PktP, struct Port PortP)
	{
	if (readw(PortP->RxRemove) & PKT_IN_USE) {
	PktP = (struct PKT __iomem ) RIO_PTR(PortP->Caddr, readw(PortP->RxRemove) & ~PKT_IN_USE);
	return 1;
	}
	return 0;
	}

	/*
	** To remove a packet from the receive queue you clear its PKT_IN_USE bit,
	** and then bump the pointers. Once the pointers get to the end, they must
	** be wrapped back to the start.
	*/
	void remove_receive(struct Port *PortP)
	{
	writew(readw(PortP->RxRemove) & ~PKT_IN_USE, PortP->RxRemove);
	PortP->RxRemove = (PortP->RxRemove == PortP->RxEnd) ? PortP->RxStart : PortP->RxRemove + 1;
	writew(RIO_OFF(PortP->Caddr, PortP->RxRemove), &PortP->PhbP->rx_remove);
	}