| /* |
| * Driver for (BCM4706)? GBit MAC core on BCMA bus. |
| * |
| * Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com> |
| * |
| * Licensed under the GNU/GPL. See COPYING for details. |
| */ |
| |
| #include "bgmac.h" |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/etherdevice.h> |
| #include <linux/mii.h> |
| #include <linux/phy.h> |
| #include <linux/interrupt.h> |
| #include <linux/dma-mapping.h> |
| #include <bcm47xx_nvram.h> |
| |
| static const struct bcma_device_id bgmac_bcma_tbl[] = { |
| BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), |
| BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS), |
| BCMA_CORETABLE_END |
| }; |
| MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl); |
| |
| static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask, |
| u32 value, int timeout) |
| { |
| u32 val; |
| int i; |
| |
| for (i = 0; i < timeout / 10; i++) { |
| val = bcma_read32(core, reg); |
| if ((val & mask) == value) |
| return true; |
| udelay(10); |
| } |
| pr_err("Timeout waiting for reg 0x%X\n", reg); |
| return false; |
| } |
| |
| /************************************************** |
| * DMA |
| **************************************************/ |
| |
| static void bgmac_dma_tx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring) |
| { |
| u32 val; |
| int i; |
| |
| if (!ring->mmio_base) |
| return; |
| |
| /* Suspend DMA TX ring first. |
| * bgmac_wait_value doesn't support waiting for any of few values, so |
| * implement whole loop here. |
| */ |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, |
| BGMAC_DMA_TX_SUSPEND); |
| for (i = 0; i < 10000 / 10; i++) { |
| val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); |
| val &= BGMAC_DMA_TX_STAT; |
| if (val == BGMAC_DMA_TX_STAT_DISABLED || |
| val == BGMAC_DMA_TX_STAT_IDLEWAIT || |
| val == BGMAC_DMA_TX_STAT_STOPPED) { |
| i = 0; |
| break; |
| } |
| udelay(10); |
| } |
| if (i) |
| bgmac_err(bgmac, "Timeout suspending DMA TX ring 0x%X (BGMAC_DMA_TX_STAT: 0x%08X)\n", |
| ring->mmio_base, val); |
| |
| /* Remove SUSPEND bit */ |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0); |
| if (!bgmac_wait_value(bgmac->core, |
| ring->mmio_base + BGMAC_DMA_TX_STATUS, |
| BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED, |
| 10000)) { |
| bgmac_warn(bgmac, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n", |
| ring->mmio_base); |
| udelay(300); |
| val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); |
| if ((val & BGMAC_DMA_TX_STAT) != BGMAC_DMA_TX_STAT_DISABLED) |
| bgmac_err(bgmac, "Reset of DMA TX ring 0x%X failed\n", |
| ring->mmio_base); |
| } |
| } |
| |
| static void bgmac_dma_tx_enable(struct bgmac *bgmac, |
| struct bgmac_dma_ring *ring) |
| { |
| u32 ctl; |
| |
| ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL); |
| ctl |= BGMAC_DMA_TX_ENABLE; |
| ctl |= BGMAC_DMA_TX_PARITY_DISABLE; |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl); |
| } |
| |
| static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac, |
| struct bgmac_dma_ring *ring, |
| struct sk_buff *skb) |
| { |
| struct device *dma_dev = bgmac->core->dma_dev; |
| struct net_device *net_dev = bgmac->net_dev; |
| struct bgmac_dma_desc *dma_desc; |
| struct bgmac_slot_info *slot; |
| u32 ctl0, ctl1; |
| int free_slots; |
| |
| if (skb->len > BGMAC_DESC_CTL1_LEN) { |
| bgmac_err(bgmac, "Too long skb (%d)\n", skb->len); |
| goto err_stop_drop; |
| } |
| |
| if (ring->start <= ring->end) |
| free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS; |
| else |
| free_slots = ring->start - ring->end; |
| if (free_slots == 1) { |
| bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n"); |
| netif_stop_queue(net_dev); |
| return NETDEV_TX_BUSY; |
| } |
| |
| slot = &ring->slots[ring->end]; |
| slot->skb = skb; |
| slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(dma_dev, slot->dma_addr)) { |
| bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n", |
| ring->mmio_base); |
| goto err_stop_drop; |
| } |
| |
| ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF; |
| if (ring->end == ring->num_slots - 1) |
| ctl0 |= BGMAC_DESC_CTL0_EOT; |
| ctl1 = skb->len & BGMAC_DESC_CTL1_LEN; |
| |
| dma_desc = ring->cpu_base; |
| dma_desc += ring->end; |
| dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr)); |
| dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr)); |
| dma_desc->ctl0 = cpu_to_le32(ctl0); |
| dma_desc->ctl1 = cpu_to_le32(ctl1); |
| |
| wmb(); |
| |
| /* Increase ring->end to point empty slot. We tell hardware the first |
| * slot it should *not* read. |
| */ |
| if (++ring->end >= BGMAC_TX_RING_SLOTS) |
| ring->end = 0; |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX, |
| ring->end * sizeof(struct bgmac_dma_desc)); |
| |
| /* Always keep one slot free to allow detecting bugged calls. */ |
| if (--free_slots == 1) |
| netif_stop_queue(net_dev); |
| |
| return NETDEV_TX_OK; |
| |
| err_stop_drop: |
| netif_stop_queue(net_dev); |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| /* Free transmitted packets */ |
| static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring) |
| { |
| struct device *dma_dev = bgmac->core->dma_dev; |
| int empty_slot; |
| bool freed = false; |
| |
| /* The last slot that hardware didn't consume yet */ |
| empty_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS); |
| empty_slot &= BGMAC_DMA_TX_STATDPTR; |
| empty_slot /= sizeof(struct bgmac_dma_desc); |
| |
| while (ring->start != empty_slot) { |
| struct bgmac_slot_info *slot = &ring->slots[ring->start]; |
| |
| if (slot->skb) { |
| /* Unmap no longer used buffer */ |
| dma_unmap_single(dma_dev, slot->dma_addr, |
| slot->skb->len, DMA_TO_DEVICE); |
| slot->dma_addr = 0; |
| |
| /* Free memory! :) */ |
| dev_kfree_skb(slot->skb); |
| slot->skb = NULL; |
| } else { |
| bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n", |
| ring->start, ring->end); |
| } |
| |
| if (++ring->start >= BGMAC_TX_RING_SLOTS) |
| ring->start = 0; |
| freed = true; |
| } |
| |
| if (freed && netif_queue_stopped(bgmac->net_dev)) |
| netif_wake_queue(bgmac->net_dev); |
| } |
| |
| static void bgmac_dma_rx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring) |
| { |
| if (!ring->mmio_base) |
| return; |
| |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, 0); |
| if (!bgmac_wait_value(bgmac->core, |
| ring->mmio_base + BGMAC_DMA_RX_STATUS, |
| BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED, |
| 10000)) |
| bgmac_err(bgmac, "Reset of ring 0x%X RX failed\n", |
| ring->mmio_base); |
| } |
| |
| static void bgmac_dma_rx_enable(struct bgmac *bgmac, |
| struct bgmac_dma_ring *ring) |
| { |
| u32 ctl; |
| |
| ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL); |
| ctl &= BGMAC_DMA_RX_ADDREXT_MASK; |
| ctl |= BGMAC_DMA_RX_ENABLE; |
| ctl |= BGMAC_DMA_RX_PARITY_DISABLE; |
| ctl |= BGMAC_DMA_RX_OVERFLOW_CONT; |
| ctl |= BGMAC_RX_FRAME_OFFSET << BGMAC_DMA_RX_FRAME_OFFSET_SHIFT; |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, ctl); |
| } |
| |
| static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac, |
| struct bgmac_slot_info *slot) |
| { |
| struct device *dma_dev = bgmac->core->dma_dev; |
| struct bgmac_rx_header *rx; |
| |
| /* Alloc skb */ |
| slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE); |
| if (!slot->skb) |
| return -ENOMEM; |
| |
| /* Poison - if everything goes fine, hardware will overwrite it */ |
| rx = (struct bgmac_rx_header *)slot->skb->data; |
| rx->len = cpu_to_le16(0xdead); |
| rx->flags = cpu_to_le16(0xbeef); |
| |
| /* Map skb for the DMA */ |
| slot->dma_addr = dma_map_single(dma_dev, slot->skb->data, |
| BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); |
| if (dma_mapping_error(dma_dev, slot->dma_addr)) { |
| bgmac_err(bgmac, "DMA mapping error\n"); |
| return -ENOMEM; |
| } |
| if (slot->dma_addr & 0xC0000000) |
| bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); |
| |
| return 0; |
| } |
| |
| static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring, |
| int weight) |
| { |
| u32 end_slot; |
| int handled = 0; |
| |
| end_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_STATUS); |
| end_slot &= BGMAC_DMA_RX_STATDPTR; |
| end_slot /= sizeof(struct bgmac_dma_desc); |
| |
| ring->end = end_slot; |
| |
| while (ring->start != ring->end) { |
| struct device *dma_dev = bgmac->core->dma_dev; |
| struct bgmac_slot_info *slot = &ring->slots[ring->start]; |
| struct sk_buff *skb = slot->skb; |
| struct sk_buff *new_skb; |
| struct bgmac_rx_header *rx; |
| u16 len, flags; |
| |
| /* Unmap buffer to make it accessible to the CPU */ |
| dma_sync_single_for_cpu(dma_dev, slot->dma_addr, |
| BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); |
| |
| /* Get info from the header */ |
| rx = (struct bgmac_rx_header *)skb->data; |
| len = le16_to_cpu(rx->len); |
| flags = le16_to_cpu(rx->flags); |
| |
| /* Check for poison and drop or pass the packet */ |
| if (len == 0xdead && flags == 0xbeef) { |
| bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n", |
| ring->start); |
| } else { |
| /* Omit CRC. */ |
| len -= ETH_FCS_LEN; |
| |
| new_skb = netdev_alloc_skb_ip_align(bgmac->net_dev, len); |
| if (new_skb) { |
| skb_put(new_skb, len); |
| skb_copy_from_linear_data_offset(skb, BGMAC_RX_FRAME_OFFSET, |
| new_skb->data, |
| len); |
| skb_checksum_none_assert(skb); |
| new_skb->protocol = |
| eth_type_trans(new_skb, bgmac->net_dev); |
| netif_receive_skb(new_skb); |
| handled++; |
| } else { |
| bgmac->net_dev->stats.rx_dropped++; |
| bgmac_err(bgmac, "Allocation of skb for copying packet failed!\n"); |
| } |
| |
| /* Poison the old skb */ |
| rx->len = cpu_to_le16(0xdead); |
| rx->flags = cpu_to_le16(0xbeef); |
| } |
| |
| /* Make it back accessible to the hardware */ |
| dma_sync_single_for_device(dma_dev, slot->dma_addr, |
| BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE); |
| |
| if (++ring->start >= BGMAC_RX_RING_SLOTS) |
| ring->start = 0; |
| |
| if (handled >= weight) /* Should never be greater */ |
| break; |
| } |
| |
| return handled; |
| } |
| |
| /* Does ring support unaligned addressing? */ |
| static bool bgmac_dma_unaligned(struct bgmac *bgmac, |
| struct bgmac_dma_ring *ring, |
| enum bgmac_dma_ring_type ring_type) |
| { |
| switch (ring_type) { |
| case BGMAC_DMA_RING_TX: |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO, |
| 0xff0); |
| if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO)) |
| return true; |
| break; |
| case BGMAC_DMA_RING_RX: |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO, |
| 0xff0); |
| if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO)) |
| return true; |
| break; |
| } |
| return false; |
| } |
| |
| static void bgmac_dma_ring_free(struct bgmac *bgmac, |
| struct bgmac_dma_ring *ring) |
| { |
| struct device *dma_dev = bgmac->core->dma_dev; |
| struct bgmac_slot_info *slot; |
| int size; |
| int i; |
| |
| for (i = 0; i < ring->num_slots; i++) { |
| slot = &ring->slots[i]; |
| if (slot->skb) { |
| if (slot->dma_addr) |
| dma_unmap_single(dma_dev, slot->dma_addr, |
| slot->skb->len, DMA_TO_DEVICE); |
| dev_kfree_skb(slot->skb); |
| } |
| } |
| |
| if (ring->cpu_base) { |
| /* Free ring of descriptors */ |
| size = ring->num_slots * sizeof(struct bgmac_dma_desc); |
| dma_free_coherent(dma_dev, size, ring->cpu_base, |
| ring->dma_base); |
| } |
| } |
| |
| static void bgmac_dma_free(struct bgmac *bgmac) |
| { |
| int i; |
| |
| for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) |
| bgmac_dma_ring_free(bgmac, &bgmac->tx_ring[i]); |
| for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) |
| bgmac_dma_ring_free(bgmac, &bgmac->rx_ring[i]); |
| } |
| |
| static int bgmac_dma_alloc(struct bgmac *bgmac) |
| { |
| struct device *dma_dev = bgmac->core->dma_dev; |
| struct bgmac_dma_ring *ring; |
| static const u16 ring_base[] = { BGMAC_DMA_BASE0, BGMAC_DMA_BASE1, |
| BGMAC_DMA_BASE2, BGMAC_DMA_BASE3, }; |
| int size; /* ring size: different for Tx and Rx */ |
| int err; |
| int i; |
| |
| BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base)); |
| BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base)); |
| |
| if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) { |
| bgmac_err(bgmac, "Core does not report 64-bit DMA\n"); |
| return -ENOTSUPP; |
| } |
| |
| for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { |
| ring = &bgmac->tx_ring[i]; |
| ring->num_slots = BGMAC_TX_RING_SLOTS; |
| ring->mmio_base = ring_base[i]; |
| if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_TX)) |
| bgmac_warn(bgmac, "TX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", |
| ring->mmio_base); |
| |
| /* Alloc ring of descriptors */ |
| size = ring->num_slots * sizeof(struct bgmac_dma_desc); |
| ring->cpu_base = dma_zalloc_coherent(dma_dev, size, |
| &ring->dma_base, |
| GFP_KERNEL); |
| if (!ring->cpu_base) { |
| bgmac_err(bgmac, "Allocation of TX ring 0x%X failed\n", |
| ring->mmio_base); |
| goto err_dma_free; |
| } |
| if (ring->dma_base & 0xC0000000) |
| bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); |
| |
| /* No need to alloc TX slots yet */ |
| } |
| |
| for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { |
| int j; |
| |
| ring = &bgmac->rx_ring[i]; |
| ring->num_slots = BGMAC_RX_RING_SLOTS; |
| ring->mmio_base = ring_base[i]; |
| if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_RX)) |
| bgmac_warn(bgmac, "RX on ring 0x%X supports unaligned addressing but this feature is not implemented\n", |
| ring->mmio_base); |
| |
| /* Alloc ring of descriptors */ |
| size = ring->num_slots * sizeof(struct bgmac_dma_desc); |
| ring->cpu_base = dma_zalloc_coherent(dma_dev, size, |
| &ring->dma_base, |
| GFP_KERNEL); |
| if (!ring->cpu_base) { |
| bgmac_err(bgmac, "Allocation of RX ring 0x%X failed\n", |
| ring->mmio_base); |
| err = -ENOMEM; |
| goto err_dma_free; |
| } |
| if (ring->dma_base & 0xC0000000) |
| bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n"); |
| |
| /* Alloc RX slots */ |
| for (j = 0; j < ring->num_slots; j++) { |
| err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[j]); |
| if (err) { |
| bgmac_err(bgmac, "Can't allocate skb for slot in RX ring\n"); |
| goto err_dma_free; |
| } |
| } |
| } |
| |
| return 0; |
| |
| err_dma_free: |
| bgmac_dma_free(bgmac); |
| return -ENOMEM; |
| } |
| |
| static void bgmac_dma_init(struct bgmac *bgmac) |
| { |
| struct bgmac_dma_ring *ring; |
| struct bgmac_dma_desc *dma_desc; |
| u32 ctl0, ctl1; |
| int i; |
| |
| for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) { |
| ring = &bgmac->tx_ring[i]; |
| |
| /* We don't implement unaligned addressing, so enable first */ |
| bgmac_dma_tx_enable(bgmac, ring); |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO, |
| lower_32_bits(ring->dma_base)); |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGHI, |
| upper_32_bits(ring->dma_base)); |
| |
| ring->start = 0; |
| ring->end = 0; /* Points the slot that should *not* be read */ |
| } |
| |
| for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { |
| int j; |
| |
| ring = &bgmac->rx_ring[i]; |
| |
| /* We don't implement unaligned addressing, so enable first */ |
| bgmac_dma_rx_enable(bgmac, ring); |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO, |
| lower_32_bits(ring->dma_base)); |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGHI, |
| upper_32_bits(ring->dma_base)); |
| |
| for (j = 0, dma_desc = ring->cpu_base; j < ring->num_slots; |
| j++, dma_desc++) { |
| ctl0 = ctl1 = 0; |
| |
| if (j == ring->num_slots - 1) |
| ctl0 |= BGMAC_DESC_CTL0_EOT; |
| ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN; |
| /* Is there any BGMAC device that requires extension? */ |
| /* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) & |
| * B43_DMA64_DCTL1_ADDREXT_MASK; |
| */ |
| |
| dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[j].dma_addr)); |
| dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[j].dma_addr)); |
| dma_desc->ctl0 = cpu_to_le32(ctl0); |
| dma_desc->ctl1 = cpu_to_le32(ctl1); |
| } |
| |
| bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX, |
| ring->num_slots * sizeof(struct bgmac_dma_desc)); |
| |
| ring->start = 0; |
| ring->end = 0; |
| } |
| } |
| |
| /************************************************** |
| * PHY ops |
| **************************************************/ |
| |
| static u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg) |
| { |
| struct bcma_device *core; |
| u16 phy_access_addr; |
| u16 phy_ctl_addr; |
| u32 tmp; |
| |
| BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK); |
| BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK); |
| BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT); |
| BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK); |
| BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT); |
| BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE); |
| BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START); |
| BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK); |
| BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK); |
| BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT); |
| BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE); |
| |
| if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { |
| core = bgmac->core->bus->drv_gmac_cmn.core; |
| phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; |
| phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; |
| } else { |
| core = bgmac->core; |
| phy_access_addr = BGMAC_PHY_ACCESS; |
| phy_ctl_addr = BGMAC_PHY_CNTL; |
| } |
| |
| tmp = bcma_read32(core, phy_ctl_addr); |
| tmp &= ~BGMAC_PC_EPA_MASK; |
| tmp |= phyaddr; |
| bcma_write32(core, phy_ctl_addr, tmp); |
| |
| tmp = BGMAC_PA_START; |
| tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; |
| tmp |= reg << BGMAC_PA_REG_SHIFT; |
| bcma_write32(core, phy_access_addr, tmp); |
| |
| if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { |
| bgmac_err(bgmac, "Reading PHY %d register 0x%X failed\n", |
| phyaddr, reg); |
| return 0xffff; |
| } |
| |
| return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK; |
| } |
| |
| /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */ |
| static int bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value) |
| { |
| struct bcma_device *core; |
| u16 phy_access_addr; |
| u16 phy_ctl_addr; |
| u32 tmp; |
| |
| if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) { |
| core = bgmac->core->bus->drv_gmac_cmn.core; |
| phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS; |
| phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL; |
| } else { |
| core = bgmac->core; |
| phy_access_addr = BGMAC_PHY_ACCESS; |
| phy_ctl_addr = BGMAC_PHY_CNTL; |
| } |
| |
| tmp = bcma_read32(core, phy_ctl_addr); |
| tmp &= ~BGMAC_PC_EPA_MASK; |
| tmp |= phyaddr; |
| bcma_write32(core, phy_ctl_addr, tmp); |
| |
| bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO); |
| if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO) |
| bgmac_warn(bgmac, "Error setting MDIO int\n"); |
| |
| tmp = BGMAC_PA_START; |
| tmp |= BGMAC_PA_WRITE; |
| tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT; |
| tmp |= reg << BGMAC_PA_REG_SHIFT; |
| tmp |= value; |
| bcma_write32(core, phy_access_addr, tmp); |
| |
| if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) { |
| bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n", |
| phyaddr, reg); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */ |
| static void bgmac_phy_force(struct bgmac *bgmac) |
| { |
| u16 ctl; |
| u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB | |
| BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX); |
| |
| if (bgmac->phyaddr == BGMAC_PHY_NOREGS) |
| return; |
| |
| if (bgmac->autoneg) |
| return; |
| |
| ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL); |
| ctl &= mask; |
| if (bgmac->full_duplex) |
| ctl |= BGMAC_PHY_CTL_DUPLEX; |
| if (bgmac->speed == BGMAC_SPEED_100) |
| ctl |= BGMAC_PHY_CTL_SPEED_100; |
| else if (bgmac->speed == BGMAC_SPEED_1000) |
| ctl |= BGMAC_PHY_CTL_SPEED_1000; |
| bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl); |
| } |
| |
| /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */ |
| static void bgmac_phy_advertise(struct bgmac *bgmac) |
| { |
| u16 adv; |
| |
| if (bgmac->phyaddr == BGMAC_PHY_NOREGS) |
| return; |
| |
| if (!bgmac->autoneg) |
| return; |
| |
| /* Adv selected 10/100 speeds */ |
| adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV); |
| adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL | |
| BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL); |
| if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10) |
| adv |= BGMAC_PHY_ADV_10HALF; |
| if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100) |
| adv |= BGMAC_PHY_ADV_100HALF; |
| if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10) |
| adv |= BGMAC_PHY_ADV_10FULL; |
| if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100) |
| adv |= BGMAC_PHY_ADV_100FULL; |
| bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv); |
| |
| /* Adv selected 1000 speeds */ |
| adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2); |
| adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL); |
| if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000) |
| adv |= BGMAC_PHY_ADV2_1000HALF; |
| if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000) |
| adv |= BGMAC_PHY_ADV2_1000FULL; |
| bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv); |
| |
| /* Restart */ |
| bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, |
| bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) | |
| BGMAC_PHY_CTL_RESTART); |
| } |
| |
| /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */ |
| static void bgmac_phy_init(struct bgmac *bgmac) |
| { |
| struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; |
| struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; |
| u8 i; |
| |
| if (ci->id == BCMA_CHIP_ID_BCM5356) { |
| for (i = 0; i < 5; i++) { |
| bgmac_phy_write(bgmac, i, 0x1f, 0x008b); |
| bgmac_phy_write(bgmac, i, 0x15, 0x0100); |
| bgmac_phy_write(bgmac, i, 0x1f, 0x000f); |
| bgmac_phy_write(bgmac, i, 0x12, 0x2aaa); |
| bgmac_phy_write(bgmac, i, 0x1f, 0x000b); |
| } |
| } |
| if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) || |
| (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) || |
| (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) { |
| bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0); |
| bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0); |
| for (i = 0; i < 5; i++) { |
| bgmac_phy_write(bgmac, i, 0x1f, 0x000f); |
| bgmac_phy_write(bgmac, i, 0x16, 0x5284); |
| bgmac_phy_write(bgmac, i, 0x1f, 0x000b); |
| bgmac_phy_write(bgmac, i, 0x17, 0x0010); |
| bgmac_phy_write(bgmac, i, 0x1f, 0x000f); |
| bgmac_phy_write(bgmac, i, 0x16, 0x5296); |
| bgmac_phy_write(bgmac, i, 0x17, 0x1073); |
| bgmac_phy_write(bgmac, i, 0x17, 0x9073); |
| bgmac_phy_write(bgmac, i, 0x16, 0x52b6); |
| bgmac_phy_write(bgmac, i, 0x17, 0x9273); |
| bgmac_phy_write(bgmac, i, 0x1f, 0x000b); |
| } |
| } |
| } |
| |
| /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */ |
| static void bgmac_phy_reset(struct bgmac *bgmac) |
| { |
| if (bgmac->phyaddr == BGMAC_PHY_NOREGS) |
| return; |
| |
| bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, |
| BGMAC_PHY_CTL_RESET); |
| udelay(100); |
| if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) & |
| BGMAC_PHY_CTL_RESET) |
| bgmac_err(bgmac, "PHY reset failed\n"); |
| bgmac_phy_init(bgmac); |
| } |
| |
| /************************************************** |
| * Chip ops |
| **************************************************/ |
| |
| /* TODO: can we just drop @force? Can we don't reset MAC at all if there is |
| * nothing to change? Try if after stabilizng driver. |
| */ |
| static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set, |
| bool force) |
| { |
| u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); |
| u32 new_val = (cmdcfg & mask) | set; |
| |
| bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR); |
| udelay(2); |
| |
| if (new_val != cmdcfg || force) |
| bgmac_write(bgmac, BGMAC_CMDCFG, new_val); |
| |
| bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR); |
| udelay(2); |
| } |
| |
| static void bgmac_write_mac_address(struct bgmac *bgmac, u8 *addr) |
| { |
| u32 tmp; |
| |
| tmp = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3]; |
| bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp); |
| tmp = (addr[4] << 8) | addr[5]; |
| bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp); |
| } |
| |
| static void bgmac_set_rx_mode(struct net_device *net_dev) |
| { |
| struct bgmac *bgmac = netdev_priv(net_dev); |
| |
| if (net_dev->flags & IFF_PROMISC) |
| bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, true); |
| else |
| bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, true); |
| } |
| |
| #if 0 /* We don't use that regs yet */ |
| static void bgmac_chip_stats_update(struct bgmac *bgmac) |
| { |
| int i; |
| |
| if (bgmac->core->id.id != BCMA_CORE_4706_MAC_GBIT) { |
| for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++) |
| bgmac->mib_tx_regs[i] = |
| bgmac_read(bgmac, |
| BGMAC_TX_GOOD_OCTETS + (i * 4)); |
| for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++) |
| bgmac->mib_rx_regs[i] = |
| bgmac_read(bgmac, |
| BGMAC_RX_GOOD_OCTETS + (i * 4)); |
| } |
| |
| /* TODO: what else? how to handle BCM4706? Specs are needed */ |
| } |
| #endif |
| |
| static void bgmac_clear_mib(struct bgmac *bgmac) |
| { |
| int i; |
| |
| if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) |
| return; |
| |
| bgmac_set(bgmac, BGMAC_DEV_CTL, BGMAC_DC_MROR); |
| for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++) |
| bgmac_read(bgmac, BGMAC_TX_GOOD_OCTETS + (i * 4)); |
| for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++) |
| bgmac_read(bgmac, BGMAC_RX_GOOD_OCTETS + (i * 4)); |
| } |
| |
| /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */ |
| static void bgmac_speed(struct bgmac *bgmac, int speed) |
| { |
| u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD); |
| u32 set = 0; |
| |
| if (speed & BGMAC_SPEED_10) |
| set |= BGMAC_CMDCFG_ES_10; |
| if (speed & BGMAC_SPEED_100) |
| set |= BGMAC_CMDCFG_ES_100; |
| if (speed & BGMAC_SPEED_1000) |
| set |= BGMAC_CMDCFG_ES_1000; |
| if (!bgmac->full_duplex) |
| set |= BGMAC_CMDCFG_HD; |
| bgmac_cmdcfg_maskset(bgmac, mask, set, true); |
| } |
| |
| static void bgmac_miiconfig(struct bgmac *bgmac) |
| { |
| u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> |
| BGMAC_DS_MM_SHIFT; |
| if (imode == 0 || imode == 1) { |
| if (bgmac->autoneg) |
| bgmac_speed(bgmac, BGMAC_SPEED_100); |
| else |
| bgmac_speed(bgmac, bgmac->speed); |
| } |
| } |
| |
| /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */ |
| static void bgmac_chip_reset(struct bgmac *bgmac) |
| { |
| struct bcma_device *core = bgmac->core; |
| struct bcma_bus *bus = core->bus; |
| struct bcma_chipinfo *ci = &bus->chipinfo; |
| u32 flags = 0; |
| u32 iost; |
| int i; |
| |
| if (bcma_core_is_enabled(core)) { |
| if (!bgmac->stats_grabbed) { |
| /* bgmac_chip_stats_update(bgmac); */ |
| bgmac->stats_grabbed = true; |
| } |
| |
| for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) |
| bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]); |
| |
| bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false); |
| udelay(1); |
| |
| for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) |
| bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]); |
| |
| /* TODO: Clear software multicast filter list */ |
| } |
| |
| iost = bcma_aread32(core, BCMA_IOST); |
| if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 10) || |
| (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) || |
| (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9)) |
| iost &= ~BGMAC_BCMA_IOST_ATTACHED; |
| |
| if (iost & BGMAC_BCMA_IOST_ATTACHED) { |
| flags = BGMAC_BCMA_IOCTL_SW_CLKEN; |
| if (!bgmac->has_robosw) |
| flags |= BGMAC_BCMA_IOCTL_SW_RESET; |
| } |
| |
| bcma_core_enable(core, flags); |
| |
| if (core->id.rev > 2) { |
| bgmac_set(bgmac, BCMA_CLKCTLST, 1 << 8); |
| bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, 1 << 24, 1 << 24, |
| 1000); |
| } |
| |
| if (ci->id == BCMA_CHIP_ID_BCM5357 || ci->id == BCMA_CHIP_ID_BCM4749 || |
| ci->id == BCMA_CHIP_ID_BCM53572) { |
| struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc; |
| u8 et_swtype = 0; |
| u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY | |
| BGMAC_CHIPCTL_1_IF_TYPE_RMII; |
| char buf[2]; |
| |
| if (bcm47xx_nvram_getenv("et_swtype", buf, 1) > 0) { |
| if (kstrtou8(buf, 0, &et_swtype)) |
| bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n", |
| buf); |
| et_swtype &= 0x0f; |
| et_swtype <<= 4; |
| sw_type = et_swtype; |
| } else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) { |
| sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII; |
| } else if ((ci->id != BCMA_CHIP_ID_BCM53572 && ci->pkg == 10) || |
| (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9)) { |
| sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII | |
| BGMAC_CHIPCTL_1_SW_TYPE_RGMII; |
| } |
| bcma_chipco_chipctl_maskset(cc, 1, |
| ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK | |
| BGMAC_CHIPCTL_1_SW_TYPE_MASK), |
| sw_type); |
| } |
| |
| if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw) |
| bcma_awrite32(core, BCMA_IOCTL, |
| bcma_aread32(core, BCMA_IOCTL) & |
| ~BGMAC_BCMA_IOCTL_SW_RESET); |
| |
| /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset |
| * Specs don't say about using BGMAC_CMDCFG_SR, but in this routine |
| * BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to |
| * be keps until taking MAC out of the reset. |
| */ |
| bgmac_cmdcfg_maskset(bgmac, |
| ~(BGMAC_CMDCFG_TE | |
| BGMAC_CMDCFG_RE | |
| BGMAC_CMDCFG_RPI | |
| BGMAC_CMDCFG_TAI | |
| BGMAC_CMDCFG_HD | |
| BGMAC_CMDCFG_ML | |
| BGMAC_CMDCFG_CFE | |
| BGMAC_CMDCFG_RL | |
| BGMAC_CMDCFG_RED | |
| BGMAC_CMDCFG_PE | |
| BGMAC_CMDCFG_TPI | |
| BGMAC_CMDCFG_PAD_EN | |
| BGMAC_CMDCFG_PF), |
| BGMAC_CMDCFG_PROM | |
| BGMAC_CMDCFG_NLC | |
| BGMAC_CMDCFG_CFE | |
| BGMAC_CMDCFG_SR, |
| false); |
| |
| bgmac_clear_mib(bgmac); |
| if (core->id.id == BCMA_CORE_4706_MAC_GBIT) |
| bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0, |
| BCMA_GMAC_CMN_PC_MTE); |
| else |
| bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE); |
| bgmac_miiconfig(bgmac); |
| bgmac_phy_init(bgmac); |
| |
| bgmac->int_status = 0; |
| } |
| |
| static void bgmac_chip_intrs_on(struct bgmac *bgmac) |
| { |
| bgmac_write(bgmac, BGMAC_INT_MASK, bgmac->int_mask); |
| } |
| |
| static void bgmac_chip_intrs_off(struct bgmac *bgmac) |
| { |
| bgmac_write(bgmac, BGMAC_INT_MASK, 0); |
| bgmac_read(bgmac, BGMAC_INT_MASK); |
| } |
| |
| /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */ |
| static void bgmac_enable(struct bgmac *bgmac) |
| { |
| struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo; |
| u32 cmdcfg; |
| u32 mode; |
| u32 rxq_ctl; |
| u32 fl_ctl; |
| u16 bp_clk; |
| u8 mdp; |
| |
| cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG); |
| bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE), |
| BGMAC_CMDCFG_SR, true); |
| udelay(2); |
| cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE; |
| bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg); |
| |
| mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> |
| BGMAC_DS_MM_SHIFT; |
| if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0) |
| bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); |
| if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2) |
| bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0, |
| BGMAC_CHIPCTL_1_RXC_DLL_BYPASS); |
| |
| switch (ci->id) { |
| case BCMA_CHIP_ID_BCM5357: |
| case BCMA_CHIP_ID_BCM4749: |
| case BCMA_CHIP_ID_BCM53572: |
| case BCMA_CHIP_ID_BCM4716: |
| case BCMA_CHIP_ID_BCM47162: |
| fl_ctl = 0x03cb04cb; |
| if (ci->id == BCMA_CHIP_ID_BCM5357 || |
| ci->id == BCMA_CHIP_ID_BCM4749 || |
| ci->id == BCMA_CHIP_ID_BCM53572) |
| fl_ctl = 0x2300e1; |
| bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl); |
| bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff); |
| break; |
| } |
| |
| rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL); |
| rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK; |
| bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000; |
| mdp = (bp_clk * 128 / 1000) - 3; |
| rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT); |
| bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl); |
| } |
| |
| /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */ |
| static void bgmac_chip_init(struct bgmac *bgmac, bool full_init) |
| { |
| struct bgmac_dma_ring *ring; |
| int i; |
| |
| /* 1 interrupt per received frame */ |
| bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT); |
| |
| /* Enable 802.3x tx flow control (honor received PAUSE frames) */ |
| bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true); |
| |
| bgmac_set_rx_mode(bgmac->net_dev); |
| |
| bgmac_write_mac_address(bgmac, bgmac->net_dev->dev_addr); |
| |
| if (bgmac->loopback) |
| bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false); |
| else |
| bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, false); |
| |
| bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN); |
| |
| if (!bgmac->autoneg) { |
| bgmac_speed(bgmac, bgmac->speed); |
| bgmac_phy_force(bgmac); |
| } else if (bgmac->speed) { /* if there is anything to adv */ |
| bgmac_phy_advertise(bgmac); |
| } |
| |
| if (full_init) { |
| bgmac_dma_init(bgmac); |
| if (1) /* FIXME: is there any case we don't want IRQs? */ |
| bgmac_chip_intrs_on(bgmac); |
| } else { |
| for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) { |
| ring = &bgmac->rx_ring[i]; |
| bgmac_dma_rx_enable(bgmac, ring); |
| } |
| } |
| |
| bgmac_enable(bgmac); |
| } |
| |
| static irqreturn_t bgmac_interrupt(int irq, void *dev_id) |
| { |
| struct bgmac *bgmac = netdev_priv(dev_id); |
| |
| u32 int_status = bgmac_read(bgmac, BGMAC_INT_STATUS); |
| int_status &= bgmac->int_mask; |
| |
| if (!int_status) |
| return IRQ_NONE; |
| |
| /* Ack */ |
| bgmac_write(bgmac, BGMAC_INT_STATUS, int_status); |
| |
| /* Disable new interrupts until handling existing ones */ |
| bgmac_chip_intrs_off(bgmac); |
| |
| bgmac->int_status = int_status; |
| |
| napi_schedule(&bgmac->napi); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int bgmac_poll(struct napi_struct *napi, int weight) |
| { |
| struct bgmac *bgmac = container_of(napi, struct bgmac, napi); |
| struct bgmac_dma_ring *ring; |
| int handled = 0; |
| |
| if (bgmac->int_status & BGMAC_IS_TX0) { |
| ring = &bgmac->tx_ring[0]; |
| bgmac_dma_tx_free(bgmac, ring); |
| bgmac->int_status &= ~BGMAC_IS_TX0; |
| } |
| |
| if (bgmac->int_status & BGMAC_IS_RX) { |
| ring = &bgmac->rx_ring[0]; |
| handled += bgmac_dma_rx_read(bgmac, ring, weight); |
| bgmac->int_status &= ~BGMAC_IS_RX; |
| } |
| |
| if (bgmac->int_status) { |
| bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status); |
| bgmac->int_status = 0; |
| } |
| |
| if (handled < weight) |
| napi_complete(napi); |
| |
| bgmac_chip_intrs_on(bgmac); |
| |
| return handled; |
| } |
| |
| /************************************************** |
| * net_device_ops |
| **************************************************/ |
| |
| static int bgmac_open(struct net_device *net_dev) |
| { |
| struct bgmac *bgmac = netdev_priv(net_dev); |
| int err = 0; |
| |
| bgmac_chip_reset(bgmac); |
| /* Specs say about reclaiming rings here, but we do that in DMA init */ |
| bgmac_chip_init(bgmac, true); |
| |
| err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED, |
| KBUILD_MODNAME, net_dev); |
| if (err < 0) { |
| bgmac_err(bgmac, "IRQ request error: %d!\n", err); |
| goto err_out; |
| } |
| napi_enable(&bgmac->napi); |
| |
| netif_carrier_on(net_dev); |
| |
| err_out: |
| return err; |
| } |
| |
| static int bgmac_stop(struct net_device *net_dev) |
| { |
| struct bgmac *bgmac = netdev_priv(net_dev); |
| |
| netif_carrier_off(net_dev); |
| |
| napi_disable(&bgmac->napi); |
| bgmac_chip_intrs_off(bgmac); |
| free_irq(bgmac->core->irq, net_dev); |
| |
| bgmac_chip_reset(bgmac); |
| |
| return 0; |
| } |
| |
| static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb, |
| struct net_device *net_dev) |
| { |
| struct bgmac *bgmac = netdev_priv(net_dev); |
| struct bgmac_dma_ring *ring; |
| |
| /* No QOS support yet */ |
| ring = &bgmac->tx_ring[0]; |
| return bgmac_dma_tx_add(bgmac, ring, skb); |
| } |
| |
| static int bgmac_set_mac_address(struct net_device *net_dev, void *addr) |
| { |
| struct bgmac *bgmac = netdev_priv(net_dev); |
| int ret; |
| |
| ret = eth_prepare_mac_addr_change(net_dev, addr); |
| if (ret < 0) |
| return ret; |
| bgmac_write_mac_address(bgmac, (u8 *)addr); |
| eth_commit_mac_addr_change(net_dev, addr); |
| return 0; |
| } |
| |
| static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) |
| { |
| struct bgmac *bgmac = netdev_priv(net_dev); |
| struct mii_ioctl_data *data = if_mii(ifr); |
| |
| switch (cmd) { |
| case SIOCGMIIPHY: |
| data->phy_id = bgmac->phyaddr; |
| /* fallthru */ |
| case SIOCGMIIREG: |
| if (!netif_running(net_dev)) |
| return -EAGAIN; |
| data->val_out = bgmac_phy_read(bgmac, data->phy_id, |
| data->reg_num & 0x1f); |
| return 0; |
| case SIOCSMIIREG: |
| if (!netif_running(net_dev)) |
| return -EAGAIN; |
| bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f, |
| data->val_in); |
| return 0; |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| static const struct net_device_ops bgmac_netdev_ops = { |
| .ndo_open = bgmac_open, |
| .ndo_stop = bgmac_stop, |
| .ndo_start_xmit = bgmac_start_xmit, |
| .ndo_set_rx_mode = bgmac_set_rx_mode, |
| .ndo_set_mac_address = bgmac_set_mac_address, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_do_ioctl = bgmac_ioctl, |
| }; |
| |
| /************************************************** |
| * ethtool_ops |
| **************************************************/ |
| |
| static int bgmac_get_settings(struct net_device *net_dev, |
| struct ethtool_cmd *cmd) |
| { |
| struct bgmac *bgmac = netdev_priv(net_dev); |
| |
| cmd->supported = SUPPORTED_10baseT_Half | |
| SUPPORTED_10baseT_Full | |
| SUPPORTED_100baseT_Half | |
| SUPPORTED_100baseT_Full | |
| SUPPORTED_1000baseT_Half | |
| SUPPORTED_1000baseT_Full | |
| SUPPORTED_Autoneg; |
| |
| if (bgmac->autoneg) { |
| WARN_ON(cmd->advertising); |
| if (bgmac->full_duplex) { |
| if (bgmac->speed & BGMAC_SPEED_10) |
| cmd->advertising |= ADVERTISED_10baseT_Full; |
| if (bgmac->speed & BGMAC_SPEED_100) |
| cmd->advertising |= ADVERTISED_100baseT_Full; |
| if (bgmac->speed & BGMAC_SPEED_1000) |
| cmd->advertising |= ADVERTISED_1000baseT_Full; |
| } else { |
| if (bgmac->speed & BGMAC_SPEED_10) |
| cmd->advertising |= ADVERTISED_10baseT_Half; |
| if (bgmac->speed & BGMAC_SPEED_100) |
| cmd->advertising |= ADVERTISED_100baseT_Half; |
| if (bgmac->speed & BGMAC_SPEED_1000) |
| cmd->advertising |= ADVERTISED_1000baseT_Half; |
| } |
| } else { |
| switch (bgmac->speed) { |
| case BGMAC_SPEED_10: |
| ethtool_cmd_speed_set(cmd, SPEED_10); |
| break; |
| case BGMAC_SPEED_100: |
| ethtool_cmd_speed_set(cmd, SPEED_100); |
| break; |
| case BGMAC_SPEED_1000: |
| ethtool_cmd_speed_set(cmd, SPEED_1000); |
| break; |
| } |
| } |
| |
| cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; |
| |
| cmd->autoneg = bgmac->autoneg; |
| |
| return 0; |
| } |
| |
| #if 0 |
| static int bgmac_set_settings(struct net_device *net_dev, |
| struct ethtool_cmd *cmd) |
| { |
| struct bgmac *bgmac = netdev_priv(net_dev); |
| |
| return -1; |
| } |
| #endif |
| |
| static void bgmac_get_drvinfo(struct net_device *net_dev, |
| struct ethtool_drvinfo *info) |
| { |
| strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); |
| strlcpy(info->bus_info, "BCMA", sizeof(info->bus_info)); |
| } |
| |
| static const struct ethtool_ops bgmac_ethtool_ops = { |
| .get_settings = bgmac_get_settings, |
| .get_drvinfo = bgmac_get_drvinfo, |
| }; |
| |
| /************************************************** |
| * MII |
| **************************************************/ |
| |
| static int bgmac_mii_read(struct mii_bus *bus, int mii_id, int regnum) |
| { |
| return bgmac_phy_read(bus->priv, mii_id, regnum); |
| } |
| |
| static int bgmac_mii_write(struct mii_bus *bus, int mii_id, int regnum, |
| u16 value) |
| { |
| return bgmac_phy_write(bus->priv, mii_id, regnum, value); |
| } |
| |
| static int bgmac_mii_register(struct bgmac *bgmac) |
| { |
| struct mii_bus *mii_bus; |
| int i, err = 0; |
| |
| mii_bus = mdiobus_alloc(); |
| if (!mii_bus) |
| return -ENOMEM; |
| |
| mii_bus->name = "bgmac mii bus"; |
| sprintf(mii_bus->id, "%s-%d-%d", "bgmac", bgmac->core->bus->num, |
| bgmac->core->core_unit); |
| mii_bus->priv = bgmac; |
| mii_bus->read = bgmac_mii_read; |
| mii_bus->write = bgmac_mii_write; |
| mii_bus->parent = &bgmac->core->dev; |
| mii_bus->phy_mask = ~(1 << bgmac->phyaddr); |
| |
| mii_bus->irq = kmalloc_array(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL); |
| if (!mii_bus->irq) { |
| err = -ENOMEM; |
| goto err_free_bus; |
| } |
| for (i = 0; i < PHY_MAX_ADDR; i++) |
| mii_bus->irq[i] = PHY_POLL; |
| |
| err = mdiobus_register(mii_bus); |
| if (err) { |
| bgmac_err(bgmac, "Registration of mii bus failed\n"); |
| goto err_free_irq; |
| } |
| |
| bgmac->mii_bus = mii_bus; |
| |
| return err; |
| |
| err_free_irq: |
| kfree(mii_bus->irq); |
| err_free_bus: |
| mdiobus_free(mii_bus); |
| return err; |
| } |
| |
| static void bgmac_mii_unregister(struct bgmac *bgmac) |
| { |
| struct mii_bus *mii_bus = bgmac->mii_bus; |
| |
| mdiobus_unregister(mii_bus); |
| kfree(mii_bus->irq); |
| mdiobus_free(mii_bus); |
| } |
| |
| /************************************************** |
| * BCMA bus ops |
| **************************************************/ |
| |
| /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */ |
| static int bgmac_probe(struct bcma_device *core) |
| { |
| struct net_device *net_dev; |
| struct bgmac *bgmac; |
| struct ssb_sprom *sprom = &core->bus->sprom; |
| u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac; |
| int err; |
| |
| /* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */ |
| if (core->core_unit > 1) { |
| pr_err("Unsupported core_unit %d\n", core->core_unit); |
| return -ENOTSUPP; |
| } |
| |
| if (!is_valid_ether_addr(mac)) { |
| dev_err(&core->dev, "Invalid MAC addr: %pM\n", mac); |
| eth_random_addr(mac); |
| dev_warn(&core->dev, "Using random MAC: %pM\n", mac); |
| } |
| |
| /* Allocation and references */ |
| net_dev = alloc_etherdev(sizeof(*bgmac)); |
| if (!net_dev) |
| return -ENOMEM; |
| net_dev->netdev_ops = &bgmac_netdev_ops; |
| net_dev->irq = core->irq; |
| SET_ETHTOOL_OPS(net_dev, &bgmac_ethtool_ops); |
| bgmac = netdev_priv(net_dev); |
| bgmac->net_dev = net_dev; |
| bgmac->core = core; |
| bcma_set_drvdata(core, bgmac); |
| |
| /* Defaults */ |
| bgmac->autoneg = true; |
| bgmac->full_duplex = true; |
| bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000; |
| memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN); |
| |
| /* On BCM4706 we need common core to access PHY */ |
| if (core->id.id == BCMA_CORE_4706_MAC_GBIT && |
| !core->bus->drv_gmac_cmn.core) { |
| bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n"); |
| err = -ENODEV; |
| goto err_netdev_free; |
| } |
| bgmac->cmn = core->bus->drv_gmac_cmn.core; |
| |
| bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr : |
| sprom->et0phyaddr; |
| bgmac->phyaddr &= BGMAC_PHY_MASK; |
| if (bgmac->phyaddr == BGMAC_PHY_MASK) { |
| bgmac_err(bgmac, "No PHY found\n"); |
| err = -ENODEV; |
| goto err_netdev_free; |
| } |
| bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr, |
| bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : ""); |
| |
| if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) { |
| bgmac_err(bgmac, "PCI setup not implemented\n"); |
| err = -ENOTSUPP; |
| goto err_netdev_free; |
| } |
| |
| bgmac_chip_reset(bgmac); |
| |
| err = bgmac_dma_alloc(bgmac); |
| if (err) { |
| bgmac_err(bgmac, "Unable to alloc memory for DMA\n"); |
| goto err_netdev_free; |
| } |
| |
| bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK; |
| if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0) |
| bgmac->int_mask &= ~BGMAC_IS_TX_MASK; |
| |
| /* TODO: reset the external phy. Specs are needed */ |
| bgmac_phy_reset(bgmac); |
| |
| bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo & |
| BGMAC_BFL_ENETROBO); |
| if (bgmac->has_robosw) |
| bgmac_warn(bgmac, "Support for Roboswitch not implemented\n"); |
| |
| if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM) |
| bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n"); |
| |
| err = bgmac_mii_register(bgmac); |
| if (err) { |
| bgmac_err(bgmac, "Cannot register MDIO\n"); |
| err = -ENOTSUPP; |
| goto err_dma_free; |
| } |
| |
| err = register_netdev(bgmac->net_dev); |
| if (err) { |
| bgmac_err(bgmac, "Cannot register net device\n"); |
| err = -ENOTSUPP; |
| goto err_mii_unregister; |
| } |
| |
| netif_carrier_off(net_dev); |
| |
| netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT); |
| |
| return 0; |
| |
| err_mii_unregister: |
| bgmac_mii_unregister(bgmac); |
| err_dma_free: |
| bgmac_dma_free(bgmac); |
| |
| err_netdev_free: |
| bcma_set_drvdata(core, NULL); |
| free_netdev(net_dev); |
| |
| return err; |
| } |
| |
| static void bgmac_remove(struct bcma_device *core) |
| { |
| struct bgmac *bgmac = bcma_get_drvdata(core); |
| |
| netif_napi_del(&bgmac->napi); |
| unregister_netdev(bgmac->net_dev); |
| bgmac_mii_unregister(bgmac); |
| bgmac_dma_free(bgmac); |
| bcma_set_drvdata(core, NULL); |
| free_netdev(bgmac->net_dev); |
| } |
| |
| static struct bcma_driver bgmac_bcma_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = bgmac_bcma_tbl, |
| .probe = bgmac_probe, |
| .remove = bgmac_remove, |
| }; |
| |
| static int __init bgmac_init(void) |
| { |
| int err; |
| |
| err = bcma_driver_register(&bgmac_bcma_driver); |
| if (err) |
| return err; |
| pr_info("Broadcom 47xx GBit MAC driver loaded\n"); |
| |
| return 0; |
| } |
| |
| static void __exit bgmac_exit(void) |
| { |
| bcma_driver_unregister(&bgmac_bcma_driver); |
| } |
| |
| module_init(bgmac_init) |
| module_exit(bgmac_exit) |
| |
| MODULE_AUTHOR("Rafał Miłecki"); |
| MODULE_LICENSE("GPL"); |