| /* |
| * tps62360.c -- TI tps62360 |
| * |
| * Driver for processor core supply tps62360 and tps62361B |
| * |
| * Copyright (c) 2012, NVIDIA Corporation. |
| * |
| * Author: Laxman Dewangan <ldewangan@nvidia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2. |
| * |
| * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, |
| * whether express or implied; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA |
| * 02111-1307, USA |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/tps62360.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/regmap.h> |
| |
| /* Register definitions */ |
| #define REG_VSET0 0 |
| #define REG_VSET1 1 |
| #define REG_VSET2 2 |
| #define REG_VSET3 3 |
| #define REG_CONTROL 4 |
| #define REG_TEMP 5 |
| #define REG_RAMPCTRL 6 |
| #define REG_CHIPID 8 |
| |
| enum chips {TPS62360, TPS62361}; |
| |
| #define TPS62360_BASE_VOLTAGE 770 |
| #define TPS62360_N_VOLTAGES 64 |
| |
| #define TPS62361_BASE_VOLTAGE 500 |
| #define TPS62361_N_VOLTAGES 128 |
| |
| /* tps 62360 chip information */ |
| struct tps62360_chip { |
| const char *name; |
| struct device *dev; |
| struct regulator_desc desc; |
| struct i2c_client *client; |
| struct regulator_dev *rdev; |
| struct regmap *regmap; |
| int chip_id; |
| int vsel0_gpio; |
| int vsel1_gpio; |
| int voltage_base; |
| u8 voltage_reg_mask; |
| bool en_internal_pulldn; |
| bool en_force_pwm; |
| bool en_discharge; |
| bool valid_gpios; |
| int lru_index[4]; |
| int curr_vset_vsel[4]; |
| int curr_vset_id; |
| }; |
| |
| /* |
| * find_voltage_set_register: Find new voltage configuration register |
| * (VSET) id. |
| * The finding of the new VSET register will be based on the LRU mechanism. |
| * Each VSET register will have different voltage configured . This |
| * Function will look if any of the VSET register have requested voltage set |
| * or not. |
| * - If it is already there then it will make that register as most |
| * recently used and return as found so that caller need not to set |
| * the VSET register but need to set the proper gpios to select this |
| * VSET register. |
| * - If requested voltage is not found then it will use the least |
| * recently mechanism to get new VSET register for new configuration |
| * and will return not_found so that caller need to set new VSET |
| * register and then gpios (both). |
| */ |
| static bool find_voltage_set_register(struct tps62360_chip *tps, |
| int req_vsel, int *vset_reg_id) |
| { |
| int i; |
| bool found = false; |
| int new_vset_reg = tps->lru_index[3]; |
| int found_index = 3; |
| for (i = 0; i < 4; ++i) { |
| if (tps->curr_vset_vsel[tps->lru_index[i]] == req_vsel) { |
| new_vset_reg = tps->lru_index[i]; |
| found_index = i; |
| found = true; |
| goto update_lru_index; |
| } |
| } |
| |
| update_lru_index: |
| for (i = found_index; i > 0; i--) |
| tps->lru_index[i] = tps->lru_index[i - 1]; |
| |
| tps->lru_index[0] = new_vset_reg; |
| *vset_reg_id = new_vset_reg; |
| return found; |
| } |
| |
| static int tps62360_dcdc_get_voltage(struct regulator_dev *dev) |
| { |
| struct tps62360_chip *tps = rdev_get_drvdata(dev); |
| int vsel; |
| unsigned int data; |
| int ret; |
| |
| ret = regmap_read(tps->regmap, REG_VSET0 + tps->curr_vset_id, &data); |
| if (ret < 0) { |
| dev_err(tps->dev, "%s: Error in reading register %d\n", |
| __func__, REG_VSET0 + tps->curr_vset_id); |
| return ret; |
| } |
| vsel = (int)data & tps->voltage_reg_mask; |
| return (tps->voltage_base + vsel * 10) * 1000; |
| } |
| |
| static int tps62360_dcdc_set_voltage(struct regulator_dev *dev, |
| int min_uV, int max_uV, unsigned *selector) |
| { |
| struct tps62360_chip *tps = rdev_get_drvdata(dev); |
| int vsel; |
| int ret; |
| bool found = false; |
| int new_vset_id = tps->curr_vset_id; |
| |
| if (max_uV < min_uV) |
| return -EINVAL; |
| |
| if (min_uV > |
| ((tps->voltage_base + (tps->desc.n_voltages - 1) * 10) * 1000)) |
| return -EINVAL; |
| |
| if (max_uV < tps->voltage_base * 1000) |
| return -EINVAL; |
| |
| vsel = DIV_ROUND_UP(min_uV - (tps->voltage_base * 1000), 10000); |
| if (selector) |
| *selector = (vsel & tps->voltage_reg_mask); |
| |
| /* |
| * If gpios are available to select the VSET register then least |
| * recently used register for new configuration. |
| */ |
| if (tps->valid_gpios) |
| found = find_voltage_set_register(tps, vsel, &new_vset_id); |
| |
| if (!found) { |
| ret = regmap_update_bits(tps->regmap, REG_VSET0 + new_vset_id, |
| tps->voltage_reg_mask, vsel); |
| if (ret < 0) { |
| dev_err(tps->dev, "%s: Error in updating register %d\n", |
| __func__, REG_VSET0 + new_vset_id); |
| return ret; |
| } |
| tps->curr_vset_id = new_vset_id; |
| tps->curr_vset_vsel[new_vset_id] = vsel; |
| } |
| |
| /* Select proper VSET register vio gpios */ |
| if (tps->valid_gpios) { |
| gpio_set_value_cansleep(tps->vsel0_gpio, |
| new_vset_id & 0x1); |
| gpio_set_value_cansleep(tps->vsel1_gpio, |
| (new_vset_id >> 1) & 0x1); |
| } |
| return 0; |
| } |
| |
| static int tps62360_dcdc_list_voltage(struct regulator_dev *dev, |
| unsigned selector) |
| { |
| struct tps62360_chip *tps = rdev_get_drvdata(dev); |
| |
| if (selector >= tps->desc.n_voltages) |
| return -EINVAL; |
| return (tps->voltage_base + selector * 10) * 1000; |
| } |
| |
| static struct regulator_ops tps62360_dcdc_ops = { |
| .get_voltage = tps62360_dcdc_get_voltage, |
| .set_voltage = tps62360_dcdc_set_voltage, |
| .list_voltage = tps62360_dcdc_list_voltage, |
| }; |
| |
| static int tps62360_init_force_pwm(struct tps62360_chip *tps, |
| struct tps62360_regulator_platform_data *pdata, |
| int vset_id) |
| { |
| unsigned int data; |
| int ret; |
| ret = regmap_read(tps->regmap, REG_VSET0 + vset_id, &data); |
| if (ret < 0) { |
| dev_err(tps->dev, "%s() fails in writing reg %d\n", |
| __func__, REG_VSET0 + vset_id); |
| return ret; |
| } |
| tps->curr_vset_vsel[vset_id] = data & tps->voltage_reg_mask; |
| if (pdata->en_force_pwm) |
| data |= BIT(7); |
| else |
| data &= ~BIT(7); |
| ret = regmap_write(tps->regmap, REG_VSET0 + vset_id, data); |
| if (ret < 0) |
| dev_err(tps->dev, "%s() fails in writing reg %d\n", |
| __func__, REG_VSET0 + vset_id); |
| return ret; |
| } |
| |
| static int tps62360_init_dcdc(struct tps62360_chip *tps, |
| struct tps62360_regulator_platform_data *pdata) |
| { |
| int ret; |
| int i; |
| |
| /* Initailize internal pull up/down control */ |
| if (tps->en_internal_pulldn) |
| ret = regmap_write(tps->regmap, REG_CONTROL, 0xE0); |
| else |
| ret = regmap_write(tps->regmap, REG_CONTROL, 0x0); |
| if (ret < 0) { |
| dev_err(tps->dev, "%s() fails in writing reg %d\n", |
| __func__, REG_CONTROL); |
| return ret; |
| } |
| |
| /* Initailize force PWM mode */ |
| if (tps->valid_gpios) { |
| for (i = 0; i < 4; ++i) { |
| ret = tps62360_init_force_pwm(tps, pdata, i); |
| if (ret < 0) |
| return ret; |
| } |
| } else { |
| ret = tps62360_init_force_pwm(tps, pdata, tps->curr_vset_id); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* Reset output discharge path to reduce power consumption */ |
| ret = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), 0); |
| if (ret < 0) |
| dev_err(tps->dev, "%s() fails in updating reg %d\n", |
| __func__, REG_RAMPCTRL); |
| return ret; |
| } |
| |
| static const struct regmap_config tps62360_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| }; |
| |
| static int __devinit tps62360_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct tps62360_regulator_platform_data *pdata; |
| struct regulator_dev *rdev; |
| struct tps62360_chip *tps; |
| int ret; |
| int i; |
| |
| pdata = client->dev.platform_data; |
| if (!pdata) { |
| dev_err(&client->dev, "%s() Err: Platform data not found\n", |
| __func__); |
| return -EIO; |
| } |
| |
| tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); |
| if (!tps) { |
| dev_err(&client->dev, "%s() Err: Memory allocation fails\n", |
| __func__); |
| return -ENOMEM; |
| } |
| |
| tps->en_force_pwm = pdata->en_force_pwm; |
| tps->en_discharge = pdata->en_discharge; |
| tps->en_internal_pulldn = pdata->en_internal_pulldn; |
| tps->vsel0_gpio = pdata->vsel0_gpio; |
| tps->vsel1_gpio = pdata->vsel1_gpio; |
| tps->client = client; |
| tps->dev = &client->dev; |
| tps->name = id->name; |
| tps->voltage_base = (id->driver_data == TPS62360) ? |
| TPS62360_BASE_VOLTAGE : TPS62361_BASE_VOLTAGE; |
| tps->voltage_reg_mask = (id->driver_data == TPS62360) ? 0x3F : 0x7F; |
| |
| tps->desc.name = id->name; |
| tps->desc.id = 0; |
| tps->desc.n_voltages = (id->driver_data == TPS62360) ? |
| TPS62360_N_VOLTAGES : TPS62361_N_VOLTAGES; |
| tps->desc.ops = &tps62360_dcdc_ops; |
| tps->desc.type = REGULATOR_VOLTAGE; |
| tps->desc.owner = THIS_MODULE; |
| tps->regmap = regmap_init_i2c(client, &tps62360_regmap_config); |
| if (IS_ERR(tps->regmap)) { |
| ret = PTR_ERR(tps->regmap); |
| dev_err(&client->dev, "%s() Err: Failed to allocate register" |
| "map: %d\n", __func__, ret); |
| return ret; |
| } |
| i2c_set_clientdata(client, tps); |
| |
| tps->curr_vset_id = (pdata->vsel1_def_state & 1) * 2 + |
| (pdata->vsel0_def_state & 1); |
| tps->lru_index[0] = tps->curr_vset_id; |
| tps->valid_gpios = false; |
| |
| if (gpio_is_valid(tps->vsel0_gpio) && gpio_is_valid(tps->vsel1_gpio)) { |
| ret = gpio_request(tps->vsel0_gpio, "tps62360-vsel0"); |
| if (ret) { |
| dev_err(&client->dev, |
| "Err: Could not obtain vsel0 GPIO %d: %d\n", |
| tps->vsel0_gpio, ret); |
| goto err_gpio0; |
| } |
| ret = gpio_direction_output(tps->vsel0_gpio, |
| pdata->vsel0_def_state); |
| if (ret) { |
| dev_err(&client->dev, "Err: Could not set direction of" |
| "vsel0 GPIO %d: %d\n", tps->vsel0_gpio, ret); |
| gpio_free(tps->vsel0_gpio); |
| goto err_gpio0; |
| } |
| |
| ret = gpio_request(tps->vsel1_gpio, "tps62360-vsel1"); |
| if (ret) { |
| dev_err(&client->dev, |
| "Err: Could not obtain vsel1 GPIO %d: %d\n", |
| tps->vsel1_gpio, ret); |
| goto err_gpio1; |
| } |
| ret = gpio_direction_output(tps->vsel1_gpio, |
| pdata->vsel1_def_state); |
| if (ret) { |
| dev_err(&client->dev, "Err: Could not set direction of" |
| "vsel1 GPIO %d: %d\n", tps->vsel1_gpio, ret); |
| gpio_free(tps->vsel1_gpio); |
| goto err_gpio1; |
| } |
| tps->valid_gpios = true; |
| |
| /* |
| * Initialize the lru index with vset_reg id |
| * The index 0 will be most recently used and |
| * set with the tps->curr_vset_id */ |
| for (i = 0; i < 4; ++i) |
| tps->lru_index[i] = i; |
| tps->lru_index[0] = tps->curr_vset_id; |
| tps->lru_index[tps->curr_vset_id] = 0; |
| } |
| |
| ret = tps62360_init_dcdc(tps, pdata); |
| if (ret < 0) { |
| dev_err(tps->dev, "%s() Err: Init fails with = %d\n", |
| __func__, ret); |
| goto err_init; |
| } |
| |
| /* Register the regulators */ |
| rdev = regulator_register(&tps->desc, &client->dev, |
| &pdata->reg_init_data, tps, NULL); |
| if (IS_ERR(rdev)) { |
| dev_err(tps->dev, "%s() Err: Failed to register %s\n", |
| __func__, id->name); |
| ret = PTR_ERR(rdev); |
| goto err_init; |
| } |
| |
| tps->rdev = rdev; |
| return 0; |
| |
| err_init: |
| if (gpio_is_valid(tps->vsel1_gpio)) |
| gpio_free(tps->vsel1_gpio); |
| err_gpio1: |
| if (gpio_is_valid(tps->vsel0_gpio)) |
| gpio_free(tps->vsel0_gpio); |
| err_gpio0: |
| regmap_exit(tps->regmap); |
| return ret; |
| } |
| |
| /** |
| * tps62360_remove - tps62360 driver i2c remove handler |
| * @client: i2c driver client device structure |
| * |
| * Unregister TPS driver as an i2c client device driver |
| */ |
| static int __devexit tps62360_remove(struct i2c_client *client) |
| { |
| struct tps62360_chip *tps = i2c_get_clientdata(client); |
| |
| if (gpio_is_valid(tps->vsel1_gpio)) |
| gpio_free(tps->vsel1_gpio); |
| |
| if (gpio_is_valid(tps->vsel0_gpio)) |
| gpio_free(tps->vsel0_gpio); |
| |
| regulator_unregister(tps->rdev); |
| regmap_exit(tps->regmap); |
| return 0; |
| } |
| |
| static void tps62360_shutdown(struct i2c_client *client) |
| { |
| struct tps62360_chip *tps = i2c_get_clientdata(client); |
| int st; |
| |
| if (!tps->en_discharge) |
| return; |
| |
| /* Configure the output discharge path */ |
| st = regmap_update_bits(tps->regmap, REG_RAMPCTRL, BIT(2), BIT(2)); |
| if (st < 0) |
| dev_err(tps->dev, "%s() fails in updating reg %d\n", |
| __func__, REG_RAMPCTRL); |
| } |
| |
| static const struct i2c_device_id tps62360_id[] = { |
| {.name = "tps62360", .driver_data = TPS62360}, |
| {.name = "tps62361", .driver_data = TPS62361}, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, tps62360_id); |
| |
| static struct i2c_driver tps62360_i2c_driver = { |
| .driver = { |
| .name = "tps62360", |
| .owner = THIS_MODULE, |
| }, |
| .probe = tps62360_probe, |
| .remove = __devexit_p(tps62360_remove), |
| .shutdown = tps62360_shutdown, |
| .id_table = tps62360_id, |
| }; |
| |
| static int __init tps62360_init(void) |
| { |
| return i2c_add_driver(&tps62360_i2c_driver); |
| } |
| subsys_initcall(tps62360_init); |
| |
| static void __exit tps62360_cleanup(void) |
| { |
| i2c_del_driver(&tps62360_i2c_driver); |
| } |
| module_exit(tps62360_cleanup); |
| |
| MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); |
| MODULE_DESCRIPTION("TPS62360 voltage regulator driver"); |
| MODULE_LICENSE("GPL v2"); |