| /* |
| * |
| * Intel Management Engine Interface (Intel MEI) Linux driver |
| * Copyright (c) 2013-2014, Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/fs.h> |
| #include <linux/errno.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/uuid.h> |
| #include <linux/jiffies.h> |
| #include <linux/interrupt.h> |
| #include <linux/workqueue.h> |
| #include <linux/pm_runtime.h> |
| |
| #include <linux/mei.h> |
| |
| |
| #include "mei_dev.h" |
| #include "hw-txe.h" |
| |
| static const struct pci_device_id mei_txe_pci_tbl[] = { |
| {PCI_VDEVICE(INTEL, 0x0F18)}, /* Baytrail */ |
| |
| {0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, mei_txe_pci_tbl); |
| |
| #ifdef CONFIG_PM_RUNTIME |
| static inline void mei_txe_set_pm_domain(struct mei_device *dev); |
| static inline void mei_txe_unset_pm_domain(struct mei_device *dev); |
| #else |
| static inline void mei_txe_set_pm_domain(struct mei_device *dev) {} |
| static inline void mei_txe_unset_pm_domain(struct mei_device *dev) {} |
| #endif /* CONFIG_PM_RUNTIME */ |
| |
| static void mei_txe_pci_iounmap(struct pci_dev *pdev, struct mei_txe_hw *hw) |
| { |
| int i; |
| |
| for (i = SEC_BAR; i < NUM_OF_MEM_BARS; i++) { |
| if (hw->mem_addr[i]) { |
| pci_iounmap(pdev, hw->mem_addr[i]); |
| hw->mem_addr[i] = NULL; |
| } |
| } |
| } |
| /** |
| * mei_probe - Device Initialization Routine |
| * |
| * @pdev: PCI device structure |
| * @ent: entry in mei_txe_pci_tbl |
| * |
| * Return: 0 on success, <0 on failure. |
| */ |
| static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct mei_device *dev; |
| struct mei_txe_hw *hw; |
| int err; |
| int i; |
| |
| /* enable pci dev */ |
| err = pci_enable_device(pdev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to enable pci device.\n"); |
| goto end; |
| } |
| /* set PCI host mastering */ |
| pci_set_master(pdev); |
| /* pci request regions for mei driver */ |
| err = pci_request_regions(pdev, KBUILD_MODNAME); |
| if (err) { |
| dev_err(&pdev->dev, "failed to get pci regions.\n"); |
| goto disable_device; |
| } |
| |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); |
| if (err) { |
| err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, "No suitable DMA available.\n"); |
| goto release_regions; |
| } |
| } |
| |
| /* allocates and initializes the mei dev structure */ |
| dev = mei_txe_dev_init(pdev); |
| if (!dev) { |
| err = -ENOMEM; |
| goto release_regions; |
| } |
| hw = to_txe_hw(dev); |
| |
| /* mapping IO device memory */ |
| for (i = SEC_BAR; i < NUM_OF_MEM_BARS; i++) { |
| hw->mem_addr[i] = pci_iomap(pdev, i, 0); |
| if (!hw->mem_addr[i]) { |
| dev_err(&pdev->dev, "mapping I/O device memory failure.\n"); |
| err = -ENOMEM; |
| goto free_device; |
| } |
| } |
| |
| |
| pci_enable_msi(pdev); |
| |
| /* clear spurious interrupts */ |
| mei_clear_interrupts(dev); |
| |
| /* request and enable interrupt */ |
| if (pci_dev_msi_enabled(pdev)) |
| err = request_threaded_irq(pdev->irq, |
| NULL, |
| mei_txe_irq_thread_handler, |
| IRQF_ONESHOT, KBUILD_MODNAME, dev); |
| else |
| err = request_threaded_irq(pdev->irq, |
| mei_txe_irq_quick_handler, |
| mei_txe_irq_thread_handler, |
| IRQF_SHARED, KBUILD_MODNAME, dev); |
| if (err) { |
| dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n", |
| pdev->irq); |
| goto free_device; |
| } |
| |
| if (mei_start(dev)) { |
| dev_err(&pdev->dev, "init hw failure.\n"); |
| err = -ENODEV; |
| goto release_irq; |
| } |
| |
| pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_TXI_RPM_TIMEOUT); |
| pm_runtime_use_autosuspend(&pdev->dev); |
| |
| err = mei_register(dev, &pdev->dev); |
| if (err) |
| goto release_irq; |
| |
| pci_set_drvdata(pdev, dev); |
| |
| /* |
| * For not wake-able HW runtime pm framework |
| * can't be used on pci device level. |
| * Use domain runtime pm callbacks instead. |
| */ |
| if (!pci_dev_run_wake(pdev)) |
| mei_txe_set_pm_domain(dev); |
| |
| pm_runtime_put_noidle(&pdev->dev); |
| |
| return 0; |
| |
| release_irq: |
| |
| mei_cancel_work(dev); |
| |
| /* disable interrupts */ |
| mei_disable_interrupts(dev); |
| |
| free_irq(pdev->irq, dev); |
| pci_disable_msi(pdev); |
| |
| free_device: |
| mei_txe_pci_iounmap(pdev, hw); |
| |
| kfree(dev); |
| release_regions: |
| pci_release_regions(pdev); |
| disable_device: |
| pci_disable_device(pdev); |
| end: |
| dev_err(&pdev->dev, "initialization failed.\n"); |
| return err; |
| } |
| |
| /** |
| * mei_remove - Device Removal Routine |
| * |
| * @pdev: PCI device structure |
| * |
| * mei_remove is called by the PCI subsystem to alert the driver |
| * that it should release a PCI device. |
| */ |
| static void mei_txe_remove(struct pci_dev *pdev) |
| { |
| struct mei_device *dev; |
| struct mei_txe_hw *hw; |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) { |
| dev_err(&pdev->dev, "mei: dev =NULL\n"); |
| return; |
| } |
| |
| pm_runtime_get_noresume(&pdev->dev); |
| |
| hw = to_txe_hw(dev); |
| |
| mei_stop(dev); |
| |
| if (!pci_dev_run_wake(pdev)) |
| mei_txe_unset_pm_domain(dev); |
| |
| /* disable interrupts */ |
| mei_disable_interrupts(dev); |
| free_irq(pdev->irq, dev); |
| pci_disable_msi(pdev); |
| |
| pci_set_drvdata(pdev, NULL); |
| |
| mei_txe_pci_iounmap(pdev, hw); |
| |
| mei_deregister(dev); |
| |
| kfree(dev); |
| |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| } |
| |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int mei_txe_pci_suspend(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct mei_device *dev = pci_get_drvdata(pdev); |
| |
| if (!dev) |
| return -ENODEV; |
| |
| dev_dbg(&pdev->dev, "suspend\n"); |
| |
| mei_stop(dev); |
| |
| mei_disable_interrupts(dev); |
| |
| free_irq(pdev->irq, dev); |
| pci_disable_msi(pdev); |
| |
| return 0; |
| } |
| |
| static int mei_txe_pci_resume(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct mei_device *dev; |
| int err; |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) |
| return -ENODEV; |
| |
| pci_enable_msi(pdev); |
| |
| mei_clear_interrupts(dev); |
| |
| /* request and enable interrupt */ |
| if (pci_dev_msi_enabled(pdev)) |
| err = request_threaded_irq(pdev->irq, |
| NULL, |
| mei_txe_irq_thread_handler, |
| IRQF_ONESHOT, KBUILD_MODNAME, dev); |
| else |
| err = request_threaded_irq(pdev->irq, |
| mei_txe_irq_quick_handler, |
| mei_txe_irq_thread_handler, |
| IRQF_SHARED, KBUILD_MODNAME, dev); |
| if (err) { |
| dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n", |
| pdev->irq); |
| return err; |
| } |
| |
| err = mei_restart(dev); |
| |
| return err; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| #ifdef CONFIG_PM_RUNTIME |
| static int mei_txe_pm_runtime_idle(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct mei_device *dev; |
| |
| dev_dbg(&pdev->dev, "rpm: txe: runtime_idle\n"); |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) |
| return -ENODEV; |
| if (mei_write_is_idle(dev)) |
| pm_runtime_autosuspend(device); |
| |
| return -EBUSY; |
| } |
| static int mei_txe_pm_runtime_suspend(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct mei_device *dev; |
| int ret; |
| |
| dev_dbg(&pdev->dev, "rpm: txe: runtime suspend\n"); |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) |
| return -ENODEV; |
| |
| mutex_lock(&dev->device_lock); |
| |
| if (mei_write_is_idle(dev)) |
| ret = mei_txe_aliveness_set_sync(dev, 0); |
| else |
| ret = -EAGAIN; |
| |
| /* |
| * If everything is okay we're about to enter PCI low |
| * power state (D3) therefor we need to disable the |
| * interrupts towards host. |
| * However if device is not wakeable we do not enter |
| * D-low state and we need to keep the interrupt kicking |
| */ |
| if (!ret && pci_dev_run_wake(pdev)) |
| mei_disable_interrupts(dev); |
| |
| dev_dbg(&pdev->dev, "rpm: txe: runtime suspend ret=%d\n", ret); |
| |
| mutex_unlock(&dev->device_lock); |
| return ret; |
| } |
| |
| static int mei_txe_pm_runtime_resume(struct device *device) |
| { |
| struct pci_dev *pdev = to_pci_dev(device); |
| struct mei_device *dev; |
| int ret; |
| |
| dev_dbg(&pdev->dev, "rpm: txe: runtime resume\n"); |
| |
| dev = pci_get_drvdata(pdev); |
| if (!dev) |
| return -ENODEV; |
| |
| mutex_lock(&dev->device_lock); |
| |
| mei_enable_interrupts(dev); |
| |
| ret = mei_txe_aliveness_set_sync(dev, 1); |
| |
| mutex_unlock(&dev->device_lock); |
| |
| dev_dbg(&pdev->dev, "rpm: txe: runtime resume ret = %d\n", ret); |
| |
| return ret; |
| } |
| |
| /** |
| * mei_txe_set_pm_domain - fill and set pm domain structure for device |
| * |
| * @dev: mei_device |
| */ |
| static inline void mei_txe_set_pm_domain(struct mei_device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev->dev); |
| |
| if (pdev->dev.bus && pdev->dev.bus->pm) { |
| dev->pg_domain.ops = *pdev->dev.bus->pm; |
| |
| dev->pg_domain.ops.runtime_suspend = mei_txe_pm_runtime_suspend; |
| dev->pg_domain.ops.runtime_resume = mei_txe_pm_runtime_resume; |
| dev->pg_domain.ops.runtime_idle = mei_txe_pm_runtime_idle; |
| |
| pdev->dev.pm_domain = &dev->pg_domain; |
| } |
| } |
| |
| /** |
| * mei_txe_unset_pm_domain - clean pm domain structure for device |
| * |
| * @dev: mei_device |
| */ |
| static inline void mei_txe_unset_pm_domain(struct mei_device *dev) |
| { |
| /* stop using pm callbacks if any */ |
| dev->dev->pm_domain = NULL; |
| } |
| #endif /* CONFIG_PM_RUNTIME */ |
| |
| #ifdef CONFIG_PM |
| static const struct dev_pm_ops mei_txe_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(mei_txe_pci_suspend, |
| mei_txe_pci_resume) |
| SET_RUNTIME_PM_OPS( |
| mei_txe_pm_runtime_suspend, |
| mei_txe_pm_runtime_resume, |
| mei_txe_pm_runtime_idle) |
| }; |
| |
| #define MEI_TXE_PM_OPS (&mei_txe_pm_ops) |
| #else |
| #define MEI_TXE_PM_OPS NULL |
| #endif /* CONFIG_PM */ |
| |
| /* |
| * PCI driver structure |
| */ |
| static struct pci_driver mei_txe_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = mei_txe_pci_tbl, |
| .probe = mei_txe_probe, |
| .remove = mei_txe_remove, |
| .shutdown = mei_txe_remove, |
| .driver.pm = MEI_TXE_PM_OPS, |
| }; |
| |
| module_pci_driver(mei_txe_driver); |
| |
| MODULE_AUTHOR("Intel Corporation"); |
| MODULE_DESCRIPTION("Intel(R) Trusted Execution Environment Interface"); |
| MODULE_LICENSE("GPL v2"); |