| /* -*- mode: c; c-basic-offset: 8; -*- |
| * vim: noexpandtab sw=8 ts=8 sts=0: |
| * |
| * localalloc.c |
| * |
| * Node local data allocation |
| * |
| * Copyright (C) 2002, 2004 Oracle. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this program; if not, write to the |
| * Free Software Foundation, Inc., 59 Temple Place - Suite 330, |
| * Boston, MA 021110-1307, USA. |
| */ |
| |
| #include <linux/fs.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/highmem.h> |
| #include <linux/bitops.h> |
| |
| #include <cluster/masklog.h> |
| |
| #include "ocfs2.h" |
| |
| #include "alloc.h" |
| #include "blockcheck.h" |
| #include "dlmglue.h" |
| #include "inode.h" |
| #include "journal.h" |
| #include "localalloc.h" |
| #include "suballoc.h" |
| #include "super.h" |
| #include "sysfile.h" |
| #include "ocfs2_trace.h" |
| |
| #include "buffer_head_io.h" |
| |
| #define OCFS2_LOCAL_ALLOC(dinode) (&((dinode)->id2.i_lab)) |
| |
| static u32 ocfs2_local_alloc_count_bits(struct ocfs2_dinode *alloc); |
| |
| static int ocfs2_local_alloc_find_clear_bits(struct ocfs2_super *osb, |
| struct ocfs2_dinode *alloc, |
| u32 *numbits, |
| struct ocfs2_alloc_reservation *resv); |
| |
| static void ocfs2_clear_local_alloc(struct ocfs2_dinode *alloc); |
| |
| static int ocfs2_sync_local_to_main(struct ocfs2_super *osb, |
| handle_t *handle, |
| struct ocfs2_dinode *alloc, |
| struct inode *main_bm_inode, |
| struct buffer_head *main_bm_bh); |
| |
| static int ocfs2_local_alloc_reserve_for_window(struct ocfs2_super *osb, |
| struct ocfs2_alloc_context **ac, |
| struct inode **bitmap_inode, |
| struct buffer_head **bitmap_bh); |
| |
| static int ocfs2_local_alloc_new_window(struct ocfs2_super *osb, |
| handle_t *handle, |
| struct ocfs2_alloc_context *ac); |
| |
| static int ocfs2_local_alloc_slide_window(struct ocfs2_super *osb, |
| struct inode *local_alloc_inode); |
| |
| /* |
| * ocfs2_la_default_mb() - determine a default size, in megabytes of |
| * the local alloc. |
| * |
| * Generally, we'd like to pick as large a local alloc as |
| * possible. Performance on large workloads tends to scale |
| * proportionally to la size. In addition to that, the reservations |
| * code functions more efficiently as it can reserve more windows for |
| * write. |
| * |
| * Some things work against us when trying to choose a large local alloc: |
| * |
| * - We need to ensure our sizing is picked to leave enough space in |
| * group descriptors for other allocations (such as block groups, |
| * etc). Picking default sizes which are a multiple of 4 could help |
| * - block groups are allocated in 2mb and 4mb chunks. |
| * |
| * - Likewise, we don't want to starve other nodes of bits on small |
| * file systems. This can easily be taken care of by limiting our |
| * default to a reasonable size (256M) on larger cluster sizes. |
| * |
| * - Some file systems can't support very large sizes - 4k and 8k in |
| * particular are limited to less than 128 and 256 megabytes respectively. |
| * |
| * The following reference table shows group descriptor and local |
| * alloc maximums at various cluster sizes (4k blocksize) |
| * |
| * csize: 4K group: 126M la: 121M |
| * csize: 8K group: 252M la: 243M |
| * csize: 16K group: 504M la: 486M |
| * csize: 32K group: 1008M la: 972M |
| * csize: 64K group: 2016M la: 1944M |
| * csize: 128K group: 4032M la: 3888M |
| * csize: 256K group: 8064M la: 7776M |
| * csize: 512K group: 16128M la: 15552M |
| * csize: 1024K group: 32256M la: 31104M |
| */ |
| #define OCFS2_LA_MAX_DEFAULT_MB 256 |
| #define OCFS2_LA_OLD_DEFAULT 8 |
| unsigned int ocfs2_la_default_mb(struct ocfs2_super *osb) |
| { |
| unsigned int la_mb; |
| unsigned int gd_mb; |
| unsigned int la_max_mb; |
| unsigned int megs_per_slot; |
| struct super_block *sb = osb->sb; |
| |
| gd_mb = ocfs2_clusters_to_megabytes(osb->sb, |
| 8 * ocfs2_group_bitmap_size(sb, 0, osb->s_feature_incompat)); |
| |
| /* |
| * This takes care of files systems with very small group |
| * descriptors - 512 byte blocksize at cluster sizes lower |
| * than 16K and also 1k blocksize with 4k cluster size. |
| */ |
| if ((sb->s_blocksize == 512 && osb->s_clustersize <= 8192) |
| || (sb->s_blocksize == 1024 && osb->s_clustersize == 4096)) |
| return OCFS2_LA_OLD_DEFAULT; |
| |
| /* |
| * Leave enough room for some block groups and make the final |
| * value we work from a multiple of 4. |
| */ |
| gd_mb -= 16; |
| gd_mb &= 0xFFFFFFFB; |
| |
| la_mb = gd_mb; |
| |
| /* |
| * Keep window sizes down to a reasonable default |
| */ |
| if (la_mb > OCFS2_LA_MAX_DEFAULT_MB) { |
| /* |
| * Some clustersize / blocksize combinations will have |
| * given us a larger than OCFS2_LA_MAX_DEFAULT_MB |
| * default size, but get poor distribution when |
| * limited to exactly 256 megabytes. |
| * |
| * As an example, 16K clustersize at 4K blocksize |
| * gives us a cluster group size of 504M. Paring the |
| * local alloc size down to 256 however, would give us |
| * only one window and around 200MB left in the |
| * cluster group. Instead, find the first size below |
| * 256 which would give us an even distribution. |
| * |
| * Larger cluster group sizes actually work out pretty |
| * well when pared to 256, so we don't have to do this |
| * for any group that fits more than two |
| * OCFS2_LA_MAX_DEFAULT_MB windows. |
| */ |
| if (gd_mb > (2 * OCFS2_LA_MAX_DEFAULT_MB)) |
| la_mb = 256; |
| else { |
| unsigned int gd_mult = gd_mb; |
| |
| while (gd_mult > 256) |
| gd_mult = gd_mult >> 1; |
| |
| la_mb = gd_mult; |
| } |
| } |
| |
| megs_per_slot = osb->osb_clusters_at_boot / osb->max_slots; |
| megs_per_slot = ocfs2_clusters_to_megabytes(osb->sb, megs_per_slot); |
| /* Too many nodes, too few disk clusters. */ |
| if (megs_per_slot < la_mb) |
| la_mb = megs_per_slot; |
| |
| /* We can't store more bits than we can in a block. */ |
| la_max_mb = ocfs2_clusters_to_megabytes(osb->sb, |
| ocfs2_local_alloc_size(sb) * 8); |
| if (la_mb > la_max_mb) |
| la_mb = la_max_mb; |
| |
| return la_mb; |
| } |
| |
| void ocfs2_la_set_sizes(struct ocfs2_super *osb, int requested_mb) |
| { |
| struct super_block *sb = osb->sb; |
| unsigned int la_default_mb = ocfs2_la_default_mb(osb); |
| unsigned int la_max_mb; |
| |
| la_max_mb = ocfs2_clusters_to_megabytes(sb, |
| ocfs2_local_alloc_size(sb) * 8); |
| |
| trace_ocfs2_la_set_sizes(requested_mb, la_max_mb, la_default_mb); |
| |
| if (requested_mb == -1) { |
| /* No user request - use defaults */ |
| osb->local_alloc_default_bits = |
| ocfs2_megabytes_to_clusters(sb, la_default_mb); |
| } else if (requested_mb > la_max_mb) { |
| /* Request is too big, we give the maximum available */ |
| osb->local_alloc_default_bits = |
| ocfs2_megabytes_to_clusters(sb, la_max_mb); |
| } else { |
| osb->local_alloc_default_bits = |
| ocfs2_megabytes_to_clusters(sb, requested_mb); |
| } |
| |
| osb->local_alloc_bits = osb->local_alloc_default_bits; |
| } |
| |
| static inline int ocfs2_la_state_enabled(struct ocfs2_super *osb) |
| { |
| return (osb->local_alloc_state == OCFS2_LA_THROTTLED || |
| osb->local_alloc_state == OCFS2_LA_ENABLED); |
| } |
| |
| void ocfs2_local_alloc_seen_free_bits(struct ocfs2_super *osb, |
| unsigned int num_clusters) |
| { |
| spin_lock(&osb->osb_lock); |
| if (osb->local_alloc_state == OCFS2_LA_DISABLED || |
| osb->local_alloc_state == OCFS2_LA_THROTTLED) |
| if (num_clusters >= osb->local_alloc_default_bits) { |
| cancel_delayed_work(&osb->la_enable_wq); |
| osb->local_alloc_state = OCFS2_LA_ENABLED; |
| } |
| spin_unlock(&osb->osb_lock); |
| } |
| |
| void ocfs2_la_enable_worker(struct work_struct *work) |
| { |
| struct ocfs2_super *osb = |
| container_of(work, struct ocfs2_super, |
| la_enable_wq.work); |
| spin_lock(&osb->osb_lock); |
| osb->local_alloc_state = OCFS2_LA_ENABLED; |
| spin_unlock(&osb->osb_lock); |
| } |
| |
| /* |
| * Tell us whether a given allocation should use the local alloc |
| * file. Otherwise, it has to go to the main bitmap. |
| * |
| * This function does semi-dirty reads of local alloc size and state! |
| * This is ok however, as the values are re-checked once under mutex. |
| */ |
| int ocfs2_alloc_should_use_local(struct ocfs2_super *osb, u64 bits) |
| { |
| int ret = 0; |
| int la_bits; |
| |
| spin_lock(&osb->osb_lock); |
| la_bits = osb->local_alloc_bits; |
| |
| if (!ocfs2_la_state_enabled(osb)) |
| goto bail; |
| |
| /* la_bits should be at least twice the size (in clusters) of |
| * a new block group. We want to be sure block group |
| * allocations go through the local alloc, so allow an |
| * allocation to take up to half the bitmap. */ |
| if (bits > (la_bits / 2)) |
| goto bail; |
| |
| ret = 1; |
| bail: |
| trace_ocfs2_alloc_should_use_local( |
| (unsigned long long)bits, osb->local_alloc_state, la_bits, ret); |
| spin_unlock(&osb->osb_lock); |
| return ret; |
| } |
| |
| int ocfs2_load_local_alloc(struct ocfs2_super *osb) |
| { |
| int status = 0; |
| struct ocfs2_dinode *alloc = NULL; |
| struct buffer_head *alloc_bh = NULL; |
| u32 num_used; |
| struct inode *inode = NULL; |
| struct ocfs2_local_alloc *la; |
| |
| if (osb->local_alloc_bits == 0) |
| goto bail; |
| |
| if (osb->local_alloc_bits >= osb->bitmap_cpg) { |
| mlog(ML_NOTICE, "Requested local alloc window %d is larger " |
| "than max possible %u. Using defaults.\n", |
| osb->local_alloc_bits, (osb->bitmap_cpg - 1)); |
| osb->local_alloc_bits = |
| ocfs2_megabytes_to_clusters(osb->sb, |
| ocfs2_la_default_mb(osb)); |
| } |
| |
| /* read the alloc off disk */ |
| inode = ocfs2_get_system_file_inode(osb, LOCAL_ALLOC_SYSTEM_INODE, |
| osb->slot_num); |
| if (!inode) { |
| status = -EINVAL; |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| status = ocfs2_read_inode_block_full(inode, &alloc_bh, |
| OCFS2_BH_IGNORE_CACHE); |
| if (status < 0) { |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| alloc = (struct ocfs2_dinode *) alloc_bh->b_data; |
| la = OCFS2_LOCAL_ALLOC(alloc); |
| |
| if (!(le32_to_cpu(alloc->i_flags) & |
| (OCFS2_LOCAL_ALLOC_FL|OCFS2_BITMAP_FL))) { |
| mlog(ML_ERROR, "Invalid local alloc inode, %llu\n", |
| (unsigned long long)OCFS2_I(inode)->ip_blkno); |
| status = -EINVAL; |
| goto bail; |
| } |
| |
| if ((la->la_size == 0) || |
| (le16_to_cpu(la->la_size) > ocfs2_local_alloc_size(inode->i_sb))) { |
| mlog(ML_ERROR, "Local alloc size is invalid (la_size = %u)\n", |
| le16_to_cpu(la->la_size)); |
| status = -EINVAL; |
| goto bail; |
| } |
| |
| /* do a little verification. */ |
| num_used = ocfs2_local_alloc_count_bits(alloc); |
| |
| /* hopefully the local alloc has always been recovered before |
| * we load it. */ |
| if (num_used |
| || alloc->id1.bitmap1.i_used |
| || alloc->id1.bitmap1.i_total |
| || la->la_bm_off) { |
| mlog(ML_ERROR, "inconsistent detected, clean journal with" |
| " unrecovered local alloc, please run fsck.ocfs2!\n" |
| "found = %u, set = %u, taken = %u, off = %u\n", |
| num_used, le32_to_cpu(alloc->id1.bitmap1.i_used), |
| le32_to_cpu(alloc->id1.bitmap1.i_total), |
| OCFS2_LOCAL_ALLOC(alloc)->la_bm_off); |
| |
| status = -EINVAL; |
| goto bail; |
| } |
| |
| osb->local_alloc_bh = alloc_bh; |
| osb->local_alloc_state = OCFS2_LA_ENABLED; |
| |
| bail: |
| if (status < 0) |
| brelse(alloc_bh); |
| iput(inode); |
| |
| trace_ocfs2_load_local_alloc(osb->local_alloc_bits); |
| |
| if (status) |
| mlog_errno(status); |
| return status; |
| } |
| |
| /* |
| * return any unused bits to the bitmap and write out a clean |
| * local_alloc. |
| * |
| * local_alloc_bh is optional. If not passed, we will simply use the |
| * one off osb. If you do pass it however, be warned that it *will* be |
| * returned brelse'd and NULL'd out.*/ |
| void ocfs2_shutdown_local_alloc(struct ocfs2_super *osb) |
| { |
| int status; |
| handle_t *handle; |
| struct inode *local_alloc_inode = NULL; |
| struct buffer_head *bh = NULL; |
| struct buffer_head *main_bm_bh = NULL; |
| struct inode *main_bm_inode = NULL; |
| struct ocfs2_dinode *alloc_copy = NULL; |
| struct ocfs2_dinode *alloc = NULL; |
| |
| cancel_delayed_work(&osb->la_enable_wq); |
| flush_workqueue(osb->ocfs2_wq); |
| |
| if (osb->local_alloc_state == OCFS2_LA_UNUSED) |
| goto out; |
| |
| local_alloc_inode = |
| ocfs2_get_system_file_inode(osb, |
| LOCAL_ALLOC_SYSTEM_INODE, |
| osb->slot_num); |
| if (!local_alloc_inode) { |
| status = -ENOENT; |
| mlog_errno(status); |
| goto out; |
| } |
| |
| osb->local_alloc_state = OCFS2_LA_DISABLED; |
| |
| ocfs2_resmap_uninit(&osb->osb_la_resmap); |
| |
| main_bm_inode = ocfs2_get_system_file_inode(osb, |
| GLOBAL_BITMAP_SYSTEM_INODE, |
| OCFS2_INVALID_SLOT); |
| if (!main_bm_inode) { |
| status = -EINVAL; |
| mlog_errno(status); |
| goto out; |
| } |
| |
| inode_lock(main_bm_inode); |
| |
| status = ocfs2_inode_lock(main_bm_inode, &main_bm_bh, 1); |
| if (status < 0) { |
| mlog_errno(status); |
| goto out_mutex; |
| } |
| |
| /* WINDOW_MOVE_CREDITS is a bit heavy... */ |
| handle = ocfs2_start_trans(osb, OCFS2_WINDOW_MOVE_CREDITS); |
| if (IS_ERR(handle)) { |
| mlog_errno(PTR_ERR(handle)); |
| handle = NULL; |
| goto out_unlock; |
| } |
| |
| bh = osb->local_alloc_bh; |
| alloc = (struct ocfs2_dinode *) bh->b_data; |
| |
| alloc_copy = kmalloc(bh->b_size, GFP_NOFS); |
| if (!alloc_copy) { |
| status = -ENOMEM; |
| goto out_commit; |
| } |
| memcpy(alloc_copy, alloc, bh->b_size); |
| |
| status = ocfs2_journal_access_di(handle, INODE_CACHE(local_alloc_inode), |
| bh, OCFS2_JOURNAL_ACCESS_WRITE); |
| if (status < 0) { |
| mlog_errno(status); |
| goto out_commit; |
| } |
| |
| ocfs2_clear_local_alloc(alloc); |
| ocfs2_journal_dirty(handle, bh); |
| |
| brelse(bh); |
| osb->local_alloc_bh = NULL; |
| osb->local_alloc_state = OCFS2_LA_UNUSED; |
| |
| status = ocfs2_sync_local_to_main(osb, handle, alloc_copy, |
| main_bm_inode, main_bm_bh); |
| if (status < 0) |
| mlog_errno(status); |
| |
| out_commit: |
| ocfs2_commit_trans(osb, handle); |
| |
| out_unlock: |
| brelse(main_bm_bh); |
| |
| ocfs2_inode_unlock(main_bm_inode, 1); |
| |
| out_mutex: |
| inode_unlock(main_bm_inode); |
| iput(main_bm_inode); |
| |
| out: |
| iput(local_alloc_inode); |
| |
| kfree(alloc_copy); |
| } |
| |
| /* |
| * We want to free the bitmap bits outside of any recovery context as |
| * we'll need a cluster lock to do so, but we must clear the local |
| * alloc before giving up the recovered nodes journal. To solve this, |
| * we kmalloc a copy of the local alloc before it's change for the |
| * caller to process with ocfs2_complete_local_alloc_recovery |
| */ |
| int ocfs2_begin_local_alloc_recovery(struct ocfs2_super *osb, |
| int slot_num, |
| struct ocfs2_dinode **alloc_copy) |
| { |
| int status = 0; |
| struct buffer_head *alloc_bh = NULL; |
| struct inode *inode = NULL; |
| struct ocfs2_dinode *alloc; |
| |
| trace_ocfs2_begin_local_alloc_recovery(slot_num); |
| |
| *alloc_copy = NULL; |
| |
| inode = ocfs2_get_system_file_inode(osb, |
| LOCAL_ALLOC_SYSTEM_INODE, |
| slot_num); |
| if (!inode) { |
| status = -EINVAL; |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| inode_lock(inode); |
| |
| status = ocfs2_read_inode_block_full(inode, &alloc_bh, |
| OCFS2_BH_IGNORE_CACHE); |
| if (status < 0) { |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| *alloc_copy = kmalloc(alloc_bh->b_size, GFP_KERNEL); |
| if (!(*alloc_copy)) { |
| status = -ENOMEM; |
| goto bail; |
| } |
| memcpy((*alloc_copy), alloc_bh->b_data, alloc_bh->b_size); |
| |
| alloc = (struct ocfs2_dinode *) alloc_bh->b_data; |
| ocfs2_clear_local_alloc(alloc); |
| |
| ocfs2_compute_meta_ecc(osb->sb, alloc_bh->b_data, &alloc->i_check); |
| status = ocfs2_write_block(osb, alloc_bh, INODE_CACHE(inode)); |
| if (status < 0) |
| mlog_errno(status); |
| |
| bail: |
| if (status < 0) { |
| kfree(*alloc_copy); |
| *alloc_copy = NULL; |
| } |
| |
| brelse(alloc_bh); |
| |
| if (inode) { |
| inode_unlock(inode); |
| iput(inode); |
| } |
| |
| if (status) |
| mlog_errno(status); |
| return status; |
| } |
| |
| /* |
| * Step 2: By now, we've completed the journal recovery, we've stamped |
| * a clean local alloc on disk and dropped the node out of the |
| * recovery map. Dlm locks will no longer stall, so lets clear out the |
| * main bitmap. |
| */ |
| int ocfs2_complete_local_alloc_recovery(struct ocfs2_super *osb, |
| struct ocfs2_dinode *alloc) |
| { |
| int status; |
| handle_t *handle; |
| struct buffer_head *main_bm_bh = NULL; |
| struct inode *main_bm_inode; |
| |
| main_bm_inode = ocfs2_get_system_file_inode(osb, |
| GLOBAL_BITMAP_SYSTEM_INODE, |
| OCFS2_INVALID_SLOT); |
| if (!main_bm_inode) { |
| status = -EINVAL; |
| mlog_errno(status); |
| goto out; |
| } |
| |
| inode_lock(main_bm_inode); |
| |
| status = ocfs2_inode_lock(main_bm_inode, &main_bm_bh, 1); |
| if (status < 0) { |
| mlog_errno(status); |
| goto out_mutex; |
| } |
| |
| handle = ocfs2_start_trans(osb, OCFS2_WINDOW_MOVE_CREDITS); |
| if (IS_ERR(handle)) { |
| status = PTR_ERR(handle); |
| handle = NULL; |
| mlog_errno(status); |
| goto out_unlock; |
| } |
| |
| /* we want the bitmap change to be recorded on disk asap */ |
| handle->h_sync = 1; |
| |
| status = ocfs2_sync_local_to_main(osb, handle, alloc, |
| main_bm_inode, main_bm_bh); |
| if (status < 0) |
| mlog_errno(status); |
| |
| ocfs2_commit_trans(osb, handle); |
| |
| out_unlock: |
| ocfs2_inode_unlock(main_bm_inode, 1); |
| |
| out_mutex: |
| inode_unlock(main_bm_inode); |
| |
| brelse(main_bm_bh); |
| |
| iput(main_bm_inode); |
| |
| out: |
| if (!status) |
| ocfs2_init_steal_slots(osb); |
| if (status) |
| mlog_errno(status); |
| return status; |
| } |
| |
| /* |
| * make sure we've got at least bits_wanted contiguous bits in the |
| * local alloc. You lose them when you drop i_mutex. |
| * |
| * We will add ourselves to the transaction passed in, but may start |
| * our own in order to shift windows. |
| */ |
| int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb, |
| u32 bits_wanted, |
| struct ocfs2_alloc_context *ac) |
| { |
| int status; |
| struct ocfs2_dinode *alloc; |
| struct inode *local_alloc_inode; |
| unsigned int free_bits; |
| |
| BUG_ON(!ac); |
| |
| local_alloc_inode = |
| ocfs2_get_system_file_inode(osb, |
| LOCAL_ALLOC_SYSTEM_INODE, |
| osb->slot_num); |
| if (!local_alloc_inode) { |
| status = -ENOENT; |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| inode_lock(local_alloc_inode); |
| |
| /* |
| * We must double check state and allocator bits because |
| * another process may have changed them while holding i_mutex. |
| */ |
| spin_lock(&osb->osb_lock); |
| if (!ocfs2_la_state_enabled(osb) || |
| (bits_wanted > osb->local_alloc_bits)) { |
| spin_unlock(&osb->osb_lock); |
| status = -ENOSPC; |
| goto bail; |
| } |
| spin_unlock(&osb->osb_lock); |
| |
| alloc = (struct ocfs2_dinode *) osb->local_alloc_bh->b_data; |
| |
| #ifdef CONFIG_OCFS2_DEBUG_FS |
| if (le32_to_cpu(alloc->id1.bitmap1.i_used) != |
| ocfs2_local_alloc_count_bits(alloc)) { |
| ocfs2_error(osb->sb, "local alloc inode %llu says it has %u used bits, but a count shows %u\n", |
| (unsigned long long)le64_to_cpu(alloc->i_blkno), |
| le32_to_cpu(alloc->id1.bitmap1.i_used), |
| ocfs2_local_alloc_count_bits(alloc)); |
| status = -EIO; |
| goto bail; |
| } |
| #endif |
| |
| free_bits = le32_to_cpu(alloc->id1.bitmap1.i_total) - |
| le32_to_cpu(alloc->id1.bitmap1.i_used); |
| if (bits_wanted > free_bits) { |
| /* uhoh, window change time. */ |
| status = |
| ocfs2_local_alloc_slide_window(osb, local_alloc_inode); |
| if (status < 0) { |
| if (status != -ENOSPC) |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| /* |
| * Under certain conditions, the window slide code |
| * might have reduced the number of bits available or |
| * disabled the the local alloc entirely. Re-check |
| * here and return -ENOSPC if necessary. |
| */ |
| status = -ENOSPC; |
| if (!ocfs2_la_state_enabled(osb)) |
| goto bail; |
| |
| free_bits = le32_to_cpu(alloc->id1.bitmap1.i_total) - |
| le32_to_cpu(alloc->id1.bitmap1.i_used); |
| if (bits_wanted > free_bits) |
| goto bail; |
| } |
| |
| ac->ac_inode = local_alloc_inode; |
| /* We should never use localalloc from another slot */ |
| ac->ac_alloc_slot = osb->slot_num; |
| ac->ac_which = OCFS2_AC_USE_LOCAL; |
| get_bh(osb->local_alloc_bh); |
| ac->ac_bh = osb->local_alloc_bh; |
| status = 0; |
| bail: |
| if (status < 0 && local_alloc_inode) { |
| inode_unlock(local_alloc_inode); |
| iput(local_alloc_inode); |
| } |
| |
| trace_ocfs2_reserve_local_alloc_bits( |
| (unsigned long long)ac->ac_max_block, |
| bits_wanted, osb->slot_num, status); |
| |
| if (status) |
| mlog_errno(status); |
| return status; |
| } |
| |
| int ocfs2_claim_local_alloc_bits(struct ocfs2_super *osb, |
| handle_t *handle, |
| struct ocfs2_alloc_context *ac, |
| u32 bits_wanted, |
| u32 *bit_off, |
| u32 *num_bits) |
| { |
| int status, start; |
| struct inode *local_alloc_inode; |
| void *bitmap; |
| struct ocfs2_dinode *alloc; |
| struct ocfs2_local_alloc *la; |
| |
| BUG_ON(ac->ac_which != OCFS2_AC_USE_LOCAL); |
| |
| local_alloc_inode = ac->ac_inode; |
| alloc = (struct ocfs2_dinode *) osb->local_alloc_bh->b_data; |
| la = OCFS2_LOCAL_ALLOC(alloc); |
| |
| start = ocfs2_local_alloc_find_clear_bits(osb, alloc, &bits_wanted, |
| ac->ac_resv); |
| if (start == -1) { |
| /* TODO: Shouldn't we just BUG here? */ |
| status = -ENOSPC; |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| bitmap = la->la_bitmap; |
| *bit_off = le32_to_cpu(la->la_bm_off) + start; |
| *num_bits = bits_wanted; |
| |
| status = ocfs2_journal_access_di(handle, |
| INODE_CACHE(local_alloc_inode), |
| osb->local_alloc_bh, |
| OCFS2_JOURNAL_ACCESS_WRITE); |
| if (status < 0) { |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| ocfs2_resmap_claimed_bits(&osb->osb_la_resmap, ac->ac_resv, start, |
| bits_wanted); |
| |
| while(bits_wanted--) |
| ocfs2_set_bit(start++, bitmap); |
| |
| le32_add_cpu(&alloc->id1.bitmap1.i_used, *num_bits); |
| ocfs2_journal_dirty(handle, osb->local_alloc_bh); |
| |
| bail: |
| if (status) |
| mlog_errno(status); |
| return status; |
| } |
| |
| int ocfs2_free_local_alloc_bits(struct ocfs2_super *osb, |
| handle_t *handle, |
| struct ocfs2_alloc_context *ac, |
| u32 bit_off, |
| u32 num_bits) |
| { |
| int status, start; |
| u32 clear_bits; |
| struct inode *local_alloc_inode; |
| void *bitmap; |
| struct ocfs2_dinode *alloc; |
| struct ocfs2_local_alloc *la; |
| |
| BUG_ON(ac->ac_which != OCFS2_AC_USE_LOCAL); |
| |
| local_alloc_inode = ac->ac_inode; |
| alloc = (struct ocfs2_dinode *) osb->local_alloc_bh->b_data; |
| la = OCFS2_LOCAL_ALLOC(alloc); |
| |
| bitmap = la->la_bitmap; |
| start = bit_off - le32_to_cpu(la->la_bm_off); |
| clear_bits = num_bits; |
| |
| status = ocfs2_journal_access_di(handle, |
| INODE_CACHE(local_alloc_inode), |
| osb->local_alloc_bh, |
| OCFS2_JOURNAL_ACCESS_WRITE); |
| if (status < 0) { |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| while (clear_bits--) |
| ocfs2_clear_bit(start++, bitmap); |
| |
| le32_add_cpu(&alloc->id1.bitmap1.i_used, -num_bits); |
| ocfs2_journal_dirty(handle, osb->local_alloc_bh); |
| |
| bail: |
| return status; |
| } |
| |
| static u32 ocfs2_local_alloc_count_bits(struct ocfs2_dinode *alloc) |
| { |
| u32 count; |
| struct ocfs2_local_alloc *la = OCFS2_LOCAL_ALLOC(alloc); |
| |
| count = memweight(la->la_bitmap, le16_to_cpu(la->la_size)); |
| |
| trace_ocfs2_local_alloc_count_bits(count); |
| return count; |
| } |
| |
| static int ocfs2_local_alloc_find_clear_bits(struct ocfs2_super *osb, |
| struct ocfs2_dinode *alloc, |
| u32 *numbits, |
| struct ocfs2_alloc_reservation *resv) |
| { |
| int numfound = 0, bitoff, left, startoff, lastzero; |
| int local_resv = 0; |
| struct ocfs2_alloc_reservation r; |
| void *bitmap = NULL; |
| struct ocfs2_reservation_map *resmap = &osb->osb_la_resmap; |
| |
| if (!alloc->id1.bitmap1.i_total) { |
| bitoff = -1; |
| goto bail; |
| } |
| |
| if (!resv) { |
| local_resv = 1; |
| ocfs2_resv_init_once(&r); |
| ocfs2_resv_set_type(&r, OCFS2_RESV_FLAG_TMP); |
| resv = &r; |
| } |
| |
| numfound = *numbits; |
| if (ocfs2_resmap_resv_bits(resmap, resv, &bitoff, &numfound) == 0) { |
| if (numfound < *numbits) |
| *numbits = numfound; |
| goto bail; |
| } |
| |
| /* |
| * Code error. While reservations are enabled, local |
| * allocation should _always_ go through them. |
| */ |
| BUG_ON(osb->osb_resv_level != 0); |
| |
| /* |
| * Reservations are disabled. Handle this the old way. |
| */ |
| |
| bitmap = OCFS2_LOCAL_ALLOC(alloc)->la_bitmap; |
| |
| numfound = bitoff = startoff = 0; |
| lastzero = -1; |
| left = le32_to_cpu(alloc->id1.bitmap1.i_total); |
| while ((bitoff = ocfs2_find_next_zero_bit(bitmap, left, startoff)) != -1) { |
| if (bitoff == left) { |
| /* mlog(0, "bitoff (%d) == left", bitoff); */ |
| break; |
| } |
| /* mlog(0, "Found a zero: bitoff = %d, startoff = %d, " |
| "numfound = %d\n", bitoff, startoff, numfound);*/ |
| |
| /* Ok, we found a zero bit... is it contig. or do we |
| * start over?*/ |
| if (bitoff == startoff) { |
| /* we found a zero */ |
| numfound++; |
| startoff++; |
| } else { |
| /* got a zero after some ones */ |
| numfound = 1; |
| startoff = bitoff+1; |
| } |
| /* we got everything we needed */ |
| if (numfound == *numbits) { |
| /* mlog(0, "Found it all!\n"); */ |
| break; |
| } |
| } |
| |
| trace_ocfs2_local_alloc_find_clear_bits_search_bitmap(bitoff, numfound); |
| |
| if (numfound == *numbits) |
| bitoff = startoff - numfound; |
| else |
| bitoff = -1; |
| |
| bail: |
| if (local_resv) |
| ocfs2_resv_discard(resmap, resv); |
| |
| trace_ocfs2_local_alloc_find_clear_bits(*numbits, |
| le32_to_cpu(alloc->id1.bitmap1.i_total), |
| bitoff, numfound); |
| |
| return bitoff; |
| } |
| |
| static void ocfs2_clear_local_alloc(struct ocfs2_dinode *alloc) |
| { |
| struct ocfs2_local_alloc *la = OCFS2_LOCAL_ALLOC(alloc); |
| int i; |
| |
| alloc->id1.bitmap1.i_total = 0; |
| alloc->id1.bitmap1.i_used = 0; |
| la->la_bm_off = 0; |
| for(i = 0; i < le16_to_cpu(la->la_size); i++) |
| la->la_bitmap[i] = 0; |
| } |
| |
| #if 0 |
| /* turn this on and uncomment below to aid debugging window shifts. */ |
| static void ocfs2_verify_zero_bits(unsigned long *bitmap, |
| unsigned int start, |
| unsigned int count) |
| { |
| unsigned int tmp = count; |
| while(tmp--) { |
| if (ocfs2_test_bit(start + tmp, bitmap)) { |
| printk("ocfs2_verify_zero_bits: start = %u, count = " |
| "%u\n", start, count); |
| printk("ocfs2_verify_zero_bits: bit %u is set!", |
| start + tmp); |
| BUG(); |
| } |
| } |
| } |
| #endif |
| |
| /* |
| * sync the local alloc to main bitmap. |
| * |
| * assumes you've already locked the main bitmap -- the bitmap inode |
| * passed is used for caching. |
| */ |
| static int ocfs2_sync_local_to_main(struct ocfs2_super *osb, |
| handle_t *handle, |
| struct ocfs2_dinode *alloc, |
| struct inode *main_bm_inode, |
| struct buffer_head *main_bm_bh) |
| { |
| int status = 0; |
| int bit_off, left, count, start; |
| u64 la_start_blk; |
| u64 blkno; |
| void *bitmap; |
| struct ocfs2_local_alloc *la = OCFS2_LOCAL_ALLOC(alloc); |
| |
| trace_ocfs2_sync_local_to_main( |
| le32_to_cpu(alloc->id1.bitmap1.i_total), |
| le32_to_cpu(alloc->id1.bitmap1.i_used)); |
| |
| if (!alloc->id1.bitmap1.i_total) { |
| goto bail; |
| } |
| |
| if (le32_to_cpu(alloc->id1.bitmap1.i_used) == |
| le32_to_cpu(alloc->id1.bitmap1.i_total)) { |
| goto bail; |
| } |
| |
| la_start_blk = ocfs2_clusters_to_blocks(osb->sb, |
| le32_to_cpu(la->la_bm_off)); |
| bitmap = la->la_bitmap; |
| start = count = bit_off = 0; |
| left = le32_to_cpu(alloc->id1.bitmap1.i_total); |
| |
| while ((bit_off = ocfs2_find_next_zero_bit(bitmap, left, start)) |
| != -1) { |
| if ((bit_off < left) && (bit_off == start)) { |
| count++; |
| start++; |
| continue; |
| } |
| if (count) { |
| blkno = la_start_blk + |
| ocfs2_clusters_to_blocks(osb->sb, |
| start - count); |
| |
| trace_ocfs2_sync_local_to_main_free( |
| count, start - count, |
| (unsigned long long)la_start_blk, |
| (unsigned long long)blkno); |
| |
| status = ocfs2_release_clusters(handle, |
| main_bm_inode, |
| main_bm_bh, blkno, |
| count); |
| if (status < 0) { |
| mlog_errno(status); |
| goto bail; |
| } |
| } |
| if (bit_off >= left) |
| break; |
| count = 1; |
| start = bit_off + 1; |
| } |
| |
| bail: |
| if (status) |
| mlog_errno(status); |
| return status; |
| } |
| |
| enum ocfs2_la_event { |
| OCFS2_LA_EVENT_SLIDE, /* Normal window slide. */ |
| OCFS2_LA_EVENT_FRAGMENTED, /* The global bitmap has |
| * enough bits theoretically |
| * free, but a contiguous |
| * allocation could not be |
| * found. */ |
| OCFS2_LA_EVENT_ENOSPC, /* Global bitmap doesn't have |
| * enough bits free to satisfy |
| * our request. */ |
| }; |
| #define OCFS2_LA_ENABLE_INTERVAL (30 * HZ) |
| /* |
| * Given an event, calculate the size of our next local alloc window. |
| * |
| * This should always be called under i_mutex of the local alloc inode |
| * so that local alloc disabling doesn't race with processes trying to |
| * use the allocator. |
| * |
| * Returns the state which the local alloc was left in. This value can |
| * be ignored by some paths. |
| */ |
| static int ocfs2_recalc_la_window(struct ocfs2_super *osb, |
| enum ocfs2_la_event event) |
| { |
| unsigned int bits; |
| int state; |
| |
| spin_lock(&osb->osb_lock); |
| if (osb->local_alloc_state == OCFS2_LA_DISABLED) { |
| WARN_ON_ONCE(osb->local_alloc_state == OCFS2_LA_DISABLED); |
| goto out_unlock; |
| } |
| |
| /* |
| * ENOSPC and fragmentation are treated similarly for now. |
| */ |
| if (event == OCFS2_LA_EVENT_ENOSPC || |
| event == OCFS2_LA_EVENT_FRAGMENTED) { |
| /* |
| * We ran out of contiguous space in the primary |
| * bitmap. Drastically reduce the number of bits used |
| * by local alloc until we have to disable it. |
| */ |
| bits = osb->local_alloc_bits >> 1; |
| if (bits > ocfs2_megabytes_to_clusters(osb->sb, 1)) { |
| /* |
| * By setting state to THROTTLED, we'll keep |
| * the number of local alloc bits used down |
| * until an event occurs which would give us |
| * reason to assume the bitmap situation might |
| * have changed. |
| */ |
| osb->local_alloc_state = OCFS2_LA_THROTTLED; |
| osb->local_alloc_bits = bits; |
| } else { |
| osb->local_alloc_state = OCFS2_LA_DISABLED; |
| } |
| queue_delayed_work(osb->ocfs2_wq, &osb->la_enable_wq, |
| OCFS2_LA_ENABLE_INTERVAL); |
| goto out_unlock; |
| } |
| |
| /* |
| * Don't increase the size of the local alloc window until we |
| * know we might be able to fulfill the request. Otherwise, we |
| * risk bouncing around the global bitmap during periods of |
| * low space. |
| */ |
| if (osb->local_alloc_state != OCFS2_LA_THROTTLED) |
| osb->local_alloc_bits = osb->local_alloc_default_bits; |
| |
| out_unlock: |
| state = osb->local_alloc_state; |
| spin_unlock(&osb->osb_lock); |
| |
| return state; |
| } |
| |
| static int ocfs2_local_alloc_reserve_for_window(struct ocfs2_super *osb, |
| struct ocfs2_alloc_context **ac, |
| struct inode **bitmap_inode, |
| struct buffer_head **bitmap_bh) |
| { |
| int status; |
| |
| *ac = kzalloc(sizeof(struct ocfs2_alloc_context), GFP_KERNEL); |
| if (!(*ac)) { |
| status = -ENOMEM; |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| retry_enospc: |
| (*ac)->ac_bits_wanted = osb->local_alloc_bits; |
| status = ocfs2_reserve_cluster_bitmap_bits(osb, *ac); |
| if (status == -ENOSPC) { |
| if (ocfs2_recalc_la_window(osb, OCFS2_LA_EVENT_ENOSPC) == |
| OCFS2_LA_DISABLED) |
| goto bail; |
| |
| ocfs2_free_ac_resource(*ac); |
| memset(*ac, 0, sizeof(struct ocfs2_alloc_context)); |
| goto retry_enospc; |
| } |
| if (status < 0) { |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| *bitmap_inode = (*ac)->ac_inode; |
| igrab(*bitmap_inode); |
| *bitmap_bh = (*ac)->ac_bh; |
| get_bh(*bitmap_bh); |
| status = 0; |
| bail: |
| if ((status < 0) && *ac) { |
| ocfs2_free_alloc_context(*ac); |
| *ac = NULL; |
| } |
| |
| if (status) |
| mlog_errno(status); |
| return status; |
| } |
| |
| /* |
| * pass it the bitmap lock in lock_bh if you have it. |
| */ |
| static int ocfs2_local_alloc_new_window(struct ocfs2_super *osb, |
| handle_t *handle, |
| struct ocfs2_alloc_context *ac) |
| { |
| int status = 0; |
| u32 cluster_off, cluster_count; |
| struct ocfs2_dinode *alloc = NULL; |
| struct ocfs2_local_alloc *la; |
| |
| alloc = (struct ocfs2_dinode *) osb->local_alloc_bh->b_data; |
| la = OCFS2_LOCAL_ALLOC(alloc); |
| |
| trace_ocfs2_local_alloc_new_window( |
| le32_to_cpu(alloc->id1.bitmap1.i_total), |
| osb->local_alloc_bits); |
| |
| /* Instruct the allocation code to try the most recently used |
| * cluster group. We'll re-record the group used this pass |
| * below. */ |
| ac->ac_last_group = osb->la_last_gd; |
| |
| /* we used the generic suballoc reserve function, but we set |
| * everything up nicely, so there's no reason why we can't use |
| * the more specific cluster api to claim bits. */ |
| status = ocfs2_claim_clusters(handle, ac, osb->local_alloc_bits, |
| &cluster_off, &cluster_count); |
| if (status == -ENOSPC) { |
| retry_enospc: |
| /* |
| * Note: We could also try syncing the journal here to |
| * allow use of any free bits which the current |
| * transaction can't give us access to. --Mark |
| */ |
| if (ocfs2_recalc_la_window(osb, OCFS2_LA_EVENT_FRAGMENTED) == |
| OCFS2_LA_DISABLED) |
| goto bail; |
| |
| ac->ac_bits_wanted = osb->local_alloc_bits; |
| status = ocfs2_claim_clusters(handle, ac, |
| osb->local_alloc_bits, |
| &cluster_off, |
| &cluster_count); |
| if (status == -ENOSPC) |
| goto retry_enospc; |
| /* |
| * We only shrunk the *minimum* number of in our |
| * request - it's entirely possible that the allocator |
| * might give us more than we asked for. |
| */ |
| if (status == 0) { |
| spin_lock(&osb->osb_lock); |
| osb->local_alloc_bits = cluster_count; |
| spin_unlock(&osb->osb_lock); |
| } |
| } |
| if (status < 0) { |
| if (status != -ENOSPC) |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| osb->la_last_gd = ac->ac_last_group; |
| |
| la->la_bm_off = cpu_to_le32(cluster_off); |
| alloc->id1.bitmap1.i_total = cpu_to_le32(cluster_count); |
| /* just in case... In the future when we find space ourselves, |
| * we don't have to get all contiguous -- but we'll have to |
| * set all previously used bits in bitmap and update |
| * la_bits_set before setting the bits in the main bitmap. */ |
| alloc->id1.bitmap1.i_used = 0; |
| memset(OCFS2_LOCAL_ALLOC(alloc)->la_bitmap, 0, |
| le16_to_cpu(la->la_size)); |
| |
| ocfs2_resmap_restart(&osb->osb_la_resmap, cluster_count, |
| OCFS2_LOCAL_ALLOC(alloc)->la_bitmap); |
| |
| trace_ocfs2_local_alloc_new_window_result( |
| OCFS2_LOCAL_ALLOC(alloc)->la_bm_off, |
| le32_to_cpu(alloc->id1.bitmap1.i_total)); |
| |
| bail: |
| if (status) |
| mlog_errno(status); |
| return status; |
| } |
| |
| /* Note that we do *NOT* lock the local alloc inode here as |
| * it's been locked already for us. */ |
| static int ocfs2_local_alloc_slide_window(struct ocfs2_super *osb, |
| struct inode *local_alloc_inode) |
| { |
| int status = 0; |
| struct buffer_head *main_bm_bh = NULL; |
| struct inode *main_bm_inode = NULL; |
| handle_t *handle = NULL; |
| struct ocfs2_dinode *alloc; |
| struct ocfs2_dinode *alloc_copy = NULL; |
| struct ocfs2_alloc_context *ac = NULL; |
| |
| ocfs2_recalc_la_window(osb, OCFS2_LA_EVENT_SLIDE); |
| |
| /* This will lock the main bitmap for us. */ |
| status = ocfs2_local_alloc_reserve_for_window(osb, |
| &ac, |
| &main_bm_inode, |
| &main_bm_bh); |
| if (status < 0) { |
| if (status != -ENOSPC) |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| handle = ocfs2_start_trans(osb, OCFS2_WINDOW_MOVE_CREDITS); |
| if (IS_ERR(handle)) { |
| status = PTR_ERR(handle); |
| handle = NULL; |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| alloc = (struct ocfs2_dinode *) osb->local_alloc_bh->b_data; |
| |
| /* We want to clear the local alloc before doing anything |
| * else, so that if we error later during this operation, |
| * local alloc shutdown won't try to double free main bitmap |
| * bits. Make a copy so the sync function knows which bits to |
| * free. */ |
| alloc_copy = kmalloc(osb->local_alloc_bh->b_size, GFP_NOFS); |
| if (!alloc_copy) { |
| status = -ENOMEM; |
| mlog_errno(status); |
| goto bail; |
| } |
| memcpy(alloc_copy, alloc, osb->local_alloc_bh->b_size); |
| |
| status = ocfs2_journal_access_di(handle, |
| INODE_CACHE(local_alloc_inode), |
| osb->local_alloc_bh, |
| OCFS2_JOURNAL_ACCESS_WRITE); |
| if (status < 0) { |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| ocfs2_clear_local_alloc(alloc); |
| ocfs2_journal_dirty(handle, osb->local_alloc_bh); |
| |
| status = ocfs2_sync_local_to_main(osb, handle, alloc_copy, |
| main_bm_inode, main_bm_bh); |
| if (status < 0) { |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| status = ocfs2_local_alloc_new_window(osb, handle, ac); |
| if (status < 0) { |
| if (status != -ENOSPC) |
| mlog_errno(status); |
| goto bail; |
| } |
| |
| atomic_inc(&osb->alloc_stats.moves); |
| |
| bail: |
| if (handle) |
| ocfs2_commit_trans(osb, handle); |
| |
| brelse(main_bm_bh); |
| |
| iput(main_bm_inode); |
| kfree(alloc_copy); |
| |
| if (ac) |
| ocfs2_free_alloc_context(ac); |
| |
| if (status) |
| mlog_errno(status); |
| return status; |
| } |
| |