| /* |
| * acpi_ipmi.c - ACPI IPMI opregion |
| * |
| * Copyright (C) 2010 Intel Corporation |
| * Copyright (C) 2010 Zhao Yakui <yakui.zhao@intel.com> |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
| * |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/interrupt.h> |
| #include <linux/list.h> |
| #include <linux/spinlock.h> |
| #include <linux/io.h> |
| #include <acpi/acpi_bus.h> |
| #include <acpi/acpi_drivers.h> |
| #include <linux/ipmi.h> |
| #include <linux/device.h> |
| #include <linux/pnp.h> |
| |
| MODULE_AUTHOR("Zhao Yakui"); |
| MODULE_DESCRIPTION("ACPI IPMI Opregion driver"); |
| MODULE_LICENSE("GPL"); |
| |
| #define IPMI_FLAGS_HANDLER_INSTALL 0 |
| |
| #define ACPI_IPMI_OK 0 |
| #define ACPI_IPMI_TIMEOUT 0x10 |
| #define ACPI_IPMI_UNKNOWN 0x07 |
| /* the IPMI timeout is 5s */ |
| #define IPMI_TIMEOUT (5 * HZ) |
| |
| struct acpi_ipmi_device { |
| /* the device list attached to driver_data.ipmi_devices */ |
| struct list_head head; |
| /* the IPMI request message list */ |
| struct list_head tx_msg_list; |
| struct mutex tx_msg_lock; |
| acpi_handle handle; |
| struct pnp_dev *pnp_dev; |
| ipmi_user_t user_interface; |
| int ipmi_ifnum; /* IPMI interface number */ |
| long curr_msgid; |
| unsigned long flags; |
| struct ipmi_smi_info smi_data; |
| }; |
| |
| struct ipmi_driver_data { |
| struct list_head ipmi_devices; |
| struct ipmi_smi_watcher bmc_events; |
| struct ipmi_user_hndl ipmi_hndlrs; |
| struct mutex ipmi_lock; |
| }; |
| |
| struct acpi_ipmi_msg { |
| struct list_head head; |
| /* |
| * General speaking the addr type should be SI_ADDR_TYPE. And |
| * the addr channel should be BMC. |
| * In fact it can also be IPMB type. But we will have to |
| * parse it from the Netfn command buffer. It is so complex |
| * that it is skipped. |
| */ |
| struct ipmi_addr addr; |
| long tx_msgid; |
| /* it is used to track whether the IPMI message is finished */ |
| struct completion tx_complete; |
| struct kernel_ipmi_msg tx_message; |
| int msg_done; |
| /* tx data . And copy it from ACPI object buffer */ |
| u8 tx_data[64]; |
| int tx_len; |
| u8 rx_data[64]; |
| int rx_len; |
| struct acpi_ipmi_device *device; |
| }; |
| |
| /* IPMI request/response buffer per ACPI 4.0, sec 5.5.2.4.3.2 */ |
| struct acpi_ipmi_buffer { |
| u8 status; |
| u8 length; |
| u8 data[64]; |
| }; |
| |
| static void ipmi_register_bmc(int iface, struct device *dev); |
| static void ipmi_bmc_gone(int iface); |
| static void ipmi_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data); |
| static void acpi_add_ipmi_device(struct acpi_ipmi_device *ipmi_device); |
| static void acpi_remove_ipmi_device(struct acpi_ipmi_device *ipmi_device); |
| |
| static struct ipmi_driver_data driver_data = { |
| .ipmi_devices = LIST_HEAD_INIT(driver_data.ipmi_devices), |
| .bmc_events = { |
| .owner = THIS_MODULE, |
| .new_smi = ipmi_register_bmc, |
| .smi_gone = ipmi_bmc_gone, |
| }, |
| .ipmi_hndlrs = { |
| .ipmi_recv_hndl = ipmi_msg_handler, |
| }, |
| }; |
| |
| static struct acpi_ipmi_msg *acpi_alloc_ipmi_msg(struct acpi_ipmi_device *ipmi) |
| { |
| struct acpi_ipmi_msg *ipmi_msg; |
| struct pnp_dev *pnp_dev = ipmi->pnp_dev; |
| |
| ipmi_msg = kzalloc(sizeof(struct acpi_ipmi_msg), GFP_KERNEL); |
| if (!ipmi_msg) { |
| dev_warn(&pnp_dev->dev, "Can't allocate memory for ipmi_msg\n"); |
| return NULL; |
| } |
| init_completion(&ipmi_msg->tx_complete); |
| INIT_LIST_HEAD(&ipmi_msg->head); |
| ipmi_msg->device = ipmi; |
| return ipmi_msg; |
| } |
| |
| #define IPMI_OP_RGN_NETFN(offset) ((offset >> 8) & 0xff) |
| #define IPMI_OP_RGN_CMD(offset) (offset & 0xff) |
| static void acpi_format_ipmi_msg(struct acpi_ipmi_msg *tx_msg, |
| acpi_physical_address address, |
| acpi_integer *value) |
| { |
| struct kernel_ipmi_msg *msg; |
| struct acpi_ipmi_buffer *buffer; |
| struct acpi_ipmi_device *device; |
| |
| msg = &tx_msg->tx_message; |
| /* |
| * IPMI network function and command are encoded in the address |
| * within the IPMI OpRegion; see ACPI 4.0, sec 5.5.2.4.3. |
| */ |
| msg->netfn = IPMI_OP_RGN_NETFN(address); |
| msg->cmd = IPMI_OP_RGN_CMD(address); |
| msg->data = tx_msg->tx_data; |
| /* |
| * value is the parameter passed by the IPMI opregion space handler. |
| * It points to the IPMI request message buffer |
| */ |
| buffer = (struct acpi_ipmi_buffer *)value; |
| /* copy the tx message data */ |
| msg->data_len = buffer->length; |
| memcpy(tx_msg->tx_data, buffer->data, msg->data_len); |
| /* |
| * now the default type is SYSTEM_INTERFACE and channel type is BMC. |
| * If the netfn is APP_REQUEST and the cmd is SEND_MESSAGE, |
| * the addr type should be changed to IPMB. Then we will have to parse |
| * the IPMI request message buffer to get the IPMB address. |
| * If so, please fix me. |
| */ |
| tx_msg->addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; |
| tx_msg->addr.channel = IPMI_BMC_CHANNEL; |
| tx_msg->addr.data[0] = 0; |
| |
| /* Get the msgid */ |
| device = tx_msg->device; |
| mutex_lock(&device->tx_msg_lock); |
| device->curr_msgid++; |
| tx_msg->tx_msgid = device->curr_msgid; |
| mutex_unlock(&device->tx_msg_lock); |
| } |
| |
| static void acpi_format_ipmi_response(struct acpi_ipmi_msg *msg, |
| acpi_integer *value, int rem_time) |
| { |
| struct acpi_ipmi_buffer *buffer; |
| |
| /* |
| * value is also used as output parameter. It represents the response |
| * IPMI message returned by IPMI command. |
| */ |
| buffer = (struct acpi_ipmi_buffer *)value; |
| if (!rem_time && !msg->msg_done) { |
| buffer->status = ACPI_IPMI_TIMEOUT; |
| return; |
| } |
| /* |
| * If the flag of msg_done is not set or the recv length is zero, it |
| * means that the IPMI command is not executed correctly. |
| * The status code will be ACPI_IPMI_UNKNOWN. |
| */ |
| if (!msg->msg_done || !msg->rx_len) { |
| buffer->status = ACPI_IPMI_UNKNOWN; |
| return; |
| } |
| /* |
| * If the IPMI response message is obtained correctly, the status code |
| * will be ACPI_IPMI_OK |
| */ |
| buffer->status = ACPI_IPMI_OK; |
| buffer->length = msg->rx_len; |
| memcpy(buffer->data, msg->rx_data, msg->rx_len); |
| } |
| |
| static void ipmi_flush_tx_msg(struct acpi_ipmi_device *ipmi) |
| { |
| struct acpi_ipmi_msg *tx_msg, *temp; |
| int count = HZ / 10; |
| struct pnp_dev *pnp_dev = ipmi->pnp_dev; |
| |
| list_for_each_entry_safe(tx_msg, temp, &ipmi->tx_msg_list, head) { |
| /* wake up the sleep thread on the Tx msg */ |
| complete(&tx_msg->tx_complete); |
| } |
| |
| /* wait for about 100ms to flush the tx message list */ |
| while (count--) { |
| if (list_empty(&ipmi->tx_msg_list)) |
| break; |
| schedule_timeout(1); |
| } |
| if (!list_empty(&ipmi->tx_msg_list)) |
| dev_warn(&pnp_dev->dev, "tx msg list is not NULL\n"); |
| } |
| |
| static void ipmi_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data) |
| { |
| struct acpi_ipmi_device *ipmi_device = user_msg_data; |
| int msg_found = 0; |
| struct acpi_ipmi_msg *tx_msg; |
| struct pnp_dev *pnp_dev = ipmi_device->pnp_dev; |
| |
| if (msg->user != ipmi_device->user_interface) { |
| dev_warn(&pnp_dev->dev, "Unexpected response is returned. " |
| "returned user %p, expected user %p\n", |
| msg->user, ipmi_device->user_interface); |
| ipmi_free_recv_msg(msg); |
| return; |
| } |
| mutex_lock(&ipmi_device->tx_msg_lock); |
| list_for_each_entry(tx_msg, &ipmi_device->tx_msg_list, head) { |
| if (msg->msgid == tx_msg->tx_msgid) { |
| msg_found = 1; |
| break; |
| } |
| } |
| |
| mutex_unlock(&ipmi_device->tx_msg_lock); |
| if (!msg_found) { |
| dev_warn(&pnp_dev->dev, "Unexpected response (msg id %ld) is " |
| "returned.\n", msg->msgid); |
| ipmi_free_recv_msg(msg); |
| return; |
| } |
| |
| if (msg->msg.data_len) { |
| /* copy the response data to Rx_data buffer */ |
| memcpy(tx_msg->rx_data, msg->msg_data, msg->msg.data_len); |
| tx_msg->rx_len = msg->msg.data_len; |
| tx_msg->msg_done = 1; |
| } |
| complete(&tx_msg->tx_complete); |
| ipmi_free_recv_msg(msg); |
| }; |
| |
| static void ipmi_register_bmc(int iface, struct device *dev) |
| { |
| struct acpi_ipmi_device *ipmi_device, *temp; |
| struct pnp_dev *pnp_dev; |
| ipmi_user_t user; |
| int err; |
| struct ipmi_smi_info smi_data; |
| acpi_handle handle; |
| |
| err = ipmi_get_smi_info(iface, &smi_data); |
| |
| if (err) |
| return; |
| |
| if (smi_data.addr_src != SI_ACPI) { |
| put_device(smi_data.dev); |
| return; |
| } |
| |
| handle = smi_data.addr_info.acpi_info.acpi_handle; |
| |
| mutex_lock(&driver_data.ipmi_lock); |
| list_for_each_entry(temp, &driver_data.ipmi_devices, head) { |
| /* |
| * if the corresponding ACPI handle is already added |
| * to the device list, don't add it again. |
| */ |
| if (temp->handle == handle) |
| goto out; |
| } |
| |
| ipmi_device = kzalloc(sizeof(*ipmi_device), GFP_KERNEL); |
| |
| if (!ipmi_device) |
| goto out; |
| |
| pnp_dev = to_pnp_dev(smi_data.dev); |
| ipmi_device->handle = handle; |
| ipmi_device->pnp_dev = pnp_dev; |
| |
| err = ipmi_create_user(iface, &driver_data.ipmi_hndlrs, |
| ipmi_device, &user); |
| if (err) { |
| dev_warn(&pnp_dev->dev, "Can't create IPMI user interface\n"); |
| kfree(ipmi_device); |
| goto out; |
| } |
| acpi_add_ipmi_device(ipmi_device); |
| ipmi_device->user_interface = user; |
| ipmi_device->ipmi_ifnum = iface; |
| mutex_unlock(&driver_data.ipmi_lock); |
| memcpy(&ipmi_device->smi_data, &smi_data, sizeof(struct ipmi_smi_info)); |
| return; |
| |
| out: |
| mutex_unlock(&driver_data.ipmi_lock); |
| put_device(smi_data.dev); |
| return; |
| } |
| |
| static void ipmi_bmc_gone(int iface) |
| { |
| struct acpi_ipmi_device *ipmi_device, *temp; |
| |
| mutex_lock(&driver_data.ipmi_lock); |
| list_for_each_entry_safe(ipmi_device, temp, |
| &driver_data.ipmi_devices, head) { |
| if (ipmi_device->ipmi_ifnum != iface) |
| continue; |
| |
| acpi_remove_ipmi_device(ipmi_device); |
| put_device(ipmi_device->smi_data.dev); |
| kfree(ipmi_device); |
| break; |
| } |
| mutex_unlock(&driver_data.ipmi_lock); |
| } |
| /* -------------------------------------------------------------------------- |
| * Address Space Management |
| * -------------------------------------------------------------------------- */ |
| /* |
| * This is the IPMI opregion space handler. |
| * @function: indicates the read/write. In fact as the IPMI message is driven |
| * by command, only write is meaningful. |
| * @address: This contains the netfn/command of IPMI request message. |
| * @bits : not used. |
| * @value : it is an in/out parameter. It points to the IPMI message buffer. |
| * Before the IPMI message is sent, it represents the actual request |
| * IPMI message. After the IPMI message is finished, it represents |
| * the response IPMI message returned by IPMI command. |
| * @handler_context: IPMI device context. |
| */ |
| |
| static acpi_status |
| acpi_ipmi_space_handler(u32 function, acpi_physical_address address, |
| u32 bits, acpi_integer *value, |
| void *handler_context, void *region_context) |
| { |
| struct acpi_ipmi_msg *tx_msg; |
| struct acpi_ipmi_device *ipmi_device = handler_context; |
| int err, rem_time; |
| acpi_status status; |
| /* |
| * IPMI opregion message. |
| * IPMI message is firstly written to the BMC and system software |
| * can get the respsonse. So it is unmeaningful for the read access |
| * of IPMI opregion. |
| */ |
| if ((function & ACPI_IO_MASK) == ACPI_READ) |
| return AE_TYPE; |
| |
| if (!ipmi_device->user_interface) |
| return AE_NOT_EXIST; |
| |
| tx_msg = acpi_alloc_ipmi_msg(ipmi_device); |
| if (!tx_msg) |
| return AE_NO_MEMORY; |
| |
| acpi_format_ipmi_msg(tx_msg, address, value); |
| mutex_lock(&ipmi_device->tx_msg_lock); |
| list_add_tail(&tx_msg->head, &ipmi_device->tx_msg_list); |
| mutex_unlock(&ipmi_device->tx_msg_lock); |
| err = ipmi_request_settime(ipmi_device->user_interface, |
| &tx_msg->addr, |
| tx_msg->tx_msgid, |
| &tx_msg->tx_message, |
| NULL, 0, 0, 0); |
| if (err) { |
| status = AE_ERROR; |
| goto end_label; |
| } |
| rem_time = wait_for_completion_timeout(&tx_msg->tx_complete, |
| IPMI_TIMEOUT); |
| acpi_format_ipmi_response(tx_msg, value, rem_time); |
| status = AE_OK; |
| |
| end_label: |
| mutex_lock(&ipmi_device->tx_msg_lock); |
| list_del(&tx_msg->head); |
| mutex_unlock(&ipmi_device->tx_msg_lock); |
| kfree(tx_msg); |
| return status; |
| } |
| |
| static void ipmi_remove_space_handler(struct acpi_ipmi_device *ipmi) |
| { |
| if (!test_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags)) |
| return; |
| |
| acpi_remove_address_space_handler(ipmi->handle, |
| ACPI_ADR_SPACE_IPMI, &acpi_ipmi_space_handler); |
| |
| clear_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags); |
| } |
| |
| static int ipmi_install_space_handler(struct acpi_ipmi_device *ipmi) |
| { |
| acpi_status status; |
| |
| if (test_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags)) |
| return 0; |
| |
| status = acpi_install_address_space_handler(ipmi->handle, |
| ACPI_ADR_SPACE_IPMI, |
| &acpi_ipmi_space_handler, |
| NULL, ipmi); |
| if (ACPI_FAILURE(status)) { |
| struct pnp_dev *pnp_dev = ipmi->pnp_dev; |
| dev_warn(&pnp_dev->dev, "Can't register IPMI opregion space " |
| "handle\n"); |
| return -EINVAL; |
| } |
| set_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags); |
| return 0; |
| } |
| |
| static void acpi_add_ipmi_device(struct acpi_ipmi_device *ipmi_device) |
| { |
| |
| INIT_LIST_HEAD(&ipmi_device->head); |
| |
| mutex_init(&ipmi_device->tx_msg_lock); |
| INIT_LIST_HEAD(&ipmi_device->tx_msg_list); |
| ipmi_install_space_handler(ipmi_device); |
| |
| list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices); |
| } |
| |
| static void acpi_remove_ipmi_device(struct acpi_ipmi_device *ipmi_device) |
| { |
| /* |
| * If the IPMI user interface is created, it should be |
| * destroyed. |
| */ |
| if (ipmi_device->user_interface) { |
| ipmi_destroy_user(ipmi_device->user_interface); |
| ipmi_device->user_interface = NULL; |
| } |
| /* flush the Tx_msg list */ |
| if (!list_empty(&ipmi_device->tx_msg_list)) |
| ipmi_flush_tx_msg(ipmi_device); |
| |
| list_del(&ipmi_device->head); |
| ipmi_remove_space_handler(ipmi_device); |
| } |
| |
| static int __init acpi_ipmi_init(void) |
| { |
| int result = 0; |
| |
| if (acpi_disabled) |
| return result; |
| |
| mutex_init(&driver_data.ipmi_lock); |
| |
| result = ipmi_smi_watcher_register(&driver_data.bmc_events); |
| |
| return result; |
| } |
| |
| static void __exit acpi_ipmi_exit(void) |
| { |
| struct acpi_ipmi_device *ipmi_device, *temp; |
| |
| if (acpi_disabled) |
| return; |
| |
| ipmi_smi_watcher_unregister(&driver_data.bmc_events); |
| |
| /* |
| * When one smi_watcher is unregistered, it is only deleted |
| * from the smi_watcher list. But the smi_gone callback function |
| * is not called. So explicitly uninstall the ACPI IPMI oregion |
| * handler and free it. |
| */ |
| mutex_lock(&driver_data.ipmi_lock); |
| list_for_each_entry_safe(ipmi_device, temp, |
| &driver_data.ipmi_devices, head) { |
| acpi_remove_ipmi_device(ipmi_device); |
| put_device(ipmi_device->smi_data.dev); |
| kfree(ipmi_device); |
| } |
| mutex_unlock(&driver_data.ipmi_lock); |
| } |
| |
| module_init(acpi_ipmi_init); |
| module_exit(acpi_ipmi_exit); |