Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 05db218a27c955880dce6d080d5159247aad3629 / . / drivers / video / i810 / i810_main.h
blob: 06072a6466f2cee0fc46be91e9e11b9fc716bea3 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]1/*-*- linux-c -*-
2 * linux/drivers/video/i810fb_main.h -- Intel 810 frame buffer device
3 * main header file
4 *
5 * Copyright (C) 2001 Antonino Daplas<adaplas@pol.net>
6 * All Rights Reserved
7 *
8 *
9 * This file is subject to the terms and conditions of the GNU General Public
10 * License. See the file COPYING in the main directory of this archive for
11 * more details.
12 */
13
14#ifndef __I810_MAIN_H__
15#define __I810_MAIN_H__
16
17static int __devinit i810fb_init_pci (struct pci_dev *dev,
18 const struct pci_device_id *entry);
19static void __exit i810fb_remove_pci(struct pci_dev *dev);
20static int i810fb_resume(struct pci_dev *dev);
21static int i810fb_suspend(struct pci_dev *dev, pm_message_t state);
22
23/*
24 * voffset - framebuffer offset in MiB from aperture start address. In order for
25 * the driver to work with X, we must try to use memory holes left untouched by X. The
26 * following table lists where X's different surfaces start at.
27 *
28 * ---------------------------------------------
29 * : : 64 MiB : 32 MiB :
30 * ----------------------------------------------
31 * : FrontBuffer : 0 : 0 :
32 * : DepthBuffer : 48 : 16 :
33 * : BackBuffer : 56 : 24 :
34 * ----------------------------------------------
35 *
36 * So for chipsets with 64 MiB Aperture sizes, 32 MiB for v_offset is okay, allowing up to
37 * 15 + 1 MiB of Framebuffer memory. For 32 MiB Aperture sizes, a v_offset of 8 MiB should
38 * work, allowing 7 + 1 MiB of Framebuffer memory.
39 * Note, the size of the hole may change depending on how much memory you allocate to X,
40 * and how the memory is split up between these surfaces.
41 *
42 * Note: Anytime the DepthBuffer or FrontBuffer is overlapped, X would still run but with
43 * DRI disabled. But if the Frontbuffer is overlapped, X will fail to load.
44 *
45 * Experiment with v_offset to find out which works best for you.
46 */
47static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
48static u32 voffset __initdata = 0;
49
50static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
51
52/* Chipset Specific Functions */
53static int i810fb_set_par (struct fb_info *info);
54static int i810fb_getcolreg (u8 regno, u8 *red, u8 *green, u8 *blue,
55 u8 *transp, struct fb_info *info);
56static int i810fb_setcolreg (unsigned regno, unsigned red, unsigned green, unsigned blue,
57 unsigned transp, struct fb_info *info);
58static int i810fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info);
59static int i810fb_blank (int blank_mode, struct fb_info *info);
60
61/* Initialization */
62static void i810fb_release_resource (struct fb_info *info, struct i810fb_par *par);
63extern int __init agp_intel_init(void);
64
65
66/* Video Timings */
67extern void round_off_xres (u32 *xres);
68extern void round_off_yres (u32 *xres, u32 *yres);
69extern u32 i810_get_watermark (const struct fb_var_screeninfo *var,
70 struct i810fb_par *par);
71extern void i810fb_encode_registers(const struct fb_var_screeninfo *var,
72 struct i810fb_par *par, u32 xres, u32 yres);
73extern void i810fb_fill_var_timings(struct fb_var_screeninfo *var);
74
75/* Accelerated Functions */
76extern void i810fb_fillrect (struct fb_info *p,
77 const struct fb_fillrect *rect);
78extern void i810fb_copyarea (struct fb_info *p,
79 const struct fb_copyarea *region);
80extern void i810fb_imageblit(struct fb_info *p, const struct fb_image *image);
81extern int i810fb_sync (struct fb_info *p);
82
83extern void i810fb_init_ringbuffer(struct fb_info *info);
84extern void i810fb_load_front (u32 offset, struct fb_info *info);
85
Antonino A. Daplas74f6ae82005-09-09 13:10:04 -0700[diff] [blame]86#ifdef CONFIG_FB_I810_I2C
87/* I2C */
88extern int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid,
89 int conn);
90extern void i810_create_i2c_busses(struct i810fb_par *par);
91extern void i810_delete_i2c_busses(struct i810fb_par *par);
92#else
93static inline int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid,
94 int conn)
95{
96 return 1;
97}
98static inline void i810_create_i2c_busses(struct i810fb_par *par) { }
99static inline void i810_delete_i2c_busses(struct i810fb_par *par) { }
100#endif
101
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame]102/* Conditionals */
103#ifdef CONFIG_X86
104inline void flush_cache(void)
105{
106 asm volatile ("wbinvd":::"memory");
107}
108#else
109#define flush_cache() do { } while(0)
110#endif
111
112#ifdef CONFIG_MTRR
113#define KERNEL_HAS_MTRR 1
114static inline void __devinit set_mtrr(struct i810fb_par *par)
115{
116 par->mtrr_reg = mtrr_add((u32) par->aperture.physical,
117 par->aperture.size, MTRR_TYPE_WRCOMB, 1);
118 if (par->mtrr_reg < 0) {
119 printk(KERN_ERR "set_mtrr: unable to set MTRR\n");
120 return;
121 }
122 par->dev_flags |= HAS_MTRR;
123}
124static inline void unset_mtrr(struct i810fb_par *par)
125{
126 if (par->dev_flags & HAS_MTRR)
127 mtrr_del(par->mtrr_reg, (u32) par->aperture.physical,
128 par->aperture.size);
129}
130#else
131#define KERNEL_HAS_MTRR 0
132#define set_mtrr(x) printk("set_mtrr: MTRR is disabled in the kernel\n")
133
134#define unset_mtrr(x) do { } while (0)
135#endif /* CONFIG_MTRR */
136
137#ifdef CONFIG_FB_I810_GTF
138#define IS_DVT (0)
139#else
140#define IS_DVT (1)
141#endif
142
143#endif /* __I810_MAIN_H__ */