Srinivas Ramana | 3cac278 | 2017-09-13 16:31:17 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved. |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 and |
| 6 | * only version 2 as published by the Free Software Foundation. |
| 7 | * |
| 8 | * This program is distributed in the hope that it will be useful, |
| 9 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 10 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 11 | * GNU General Public License for more details. |
| 12 | */ |
| 13 | |
| 14 | &blsp1_uart0 { |
| 15 | status = "ok"; |
| 16 | pinctrl-names = "default"; |
| 17 | pinctrl-0 = <&uart_console_active>; |
| 18 | }; |
Sayali Lokhande | 3129993 | 2017-12-06 09:41:17 +0530 | [diff] [blame] | 19 | |
| 20 | &sdhc_1 { |
| 21 | /* device core power supply */ |
| 22 | vdd-supply = <&pm8953_l8>; |
| 23 | qcom,vdd-voltage-level = <2900000 2900000>; |
| 24 | qcom,vdd-current-level = <200 570000>; |
| 25 | |
| 26 | /* device communication power supply */ |
| 27 | vdd-io-supply = <&pm8953_l5>; |
| 28 | qcom,vdd-io-always-on; |
| 29 | qcom,vdd-io-lpm-sup; |
| 30 | qcom,vdd-io-voltage-level = <1800000 1800000>; |
| 31 | qcom,vdd-io-current-level = <200 325000>; |
| 32 | |
| 33 | pinctrl-names = "active", "sleep"; |
| 34 | pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; |
| 35 | pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; |
| 36 | |
| 37 | qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000 |
| 38 | 384000000>; |
| 39 | qcom,nonremovable; |
| 40 | qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v"; |
| 41 | |
| 42 | status = "ok"; |
| 43 | }; |
| 44 | |
| 45 | &sdhc_2 { |
| 46 | /* device core power supply */ |
| 47 | vdd-supply = <&pm8953_l11>; |
| 48 | qcom,vdd-voltage-level = <2950000 2950000>; |
| 49 | qcom,vdd-current-level = <15000 800000>; |
| 50 | |
| 51 | /* device communication power supply */ |
| 52 | vdd-io-supply = <&pm8953_l12>; |
| 53 | qcom,vdd-io-voltage-level = <1800000 2950000>; |
| 54 | qcom,vdd-io-current-level = <200 22000>; |
| 55 | |
| 56 | pinctrl-names = "active", "sleep"; |
| 57 | pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
| 58 | pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; |
| 59 | |
| 60 | #address-cells = <0>; |
| 61 | interrupt-parent = <&sdhc_2>; |
| 62 | interrupts = <0 1 2>; |
| 63 | #interrupt-cells = <1>; |
| 64 | interrupt-map-mask = <0xffffffff>; |
| 65 | interrupt-map = <0 &intc 0 125 0 |
| 66 | 1 &intc 0 221 0 |
| 67 | 2 &tlmm 133 0>; |
| 68 | interrupt-names = "hc_irq", "pwr_irq", "status_irq"; |
| 69 | cd-gpios = <&tlmm 133 0x1>; |
| 70 | |
| 71 | qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 |
| 72 | 200000000>; |
| 73 | qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; |
| 74 | |
| 75 | status = "ok"; |
| 76 | }; |