blob: 3d923065d9a29ca1381023d132759bcb4b735ed2 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * mxser.c -- MOXA Smartio/Industio family multiport serial driver.
3 *
Jiri Slaby80ff8a82008-02-07 00:16:51 -08004 * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com).
5 * Copyright (C) 2006-2008 Jiri Slaby <jirislaby@gmail.com>
Linus Torvalds1da177e2005-04-16 15:20:36 -07006 *
Jiri Slaby1c456072008-02-07 00:16:46 -08007 * This code is loosely based on the 1.8 moxa driver which is based on
8 * Linux serial driver, written by Linus Torvalds, Theodore T'so and
9 * others.
Linus Torvalds1da177e2005-04-16 15:20:36 -070010 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -070014 * (at your option) any later version.
Linus Torvalds1da177e2005-04-16 15:20:36 -070015 *
Linus Torvalds1da177e2005-04-16 15:20:36 -070016 * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox
Alan Cox8eb04cf2008-11-11 14:48:44 +000017 * <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on
18 * www.moxa.com.
Linus Torvalds1da177e2005-04-16 15:20:36 -070019 * - Fixed x86_64 cleanness
Linus Torvalds1da177e2005-04-16 15:20:36 -070020 */
21
Linus Torvalds1da177e2005-04-16 15:20:36 -070022#include <linux/module.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070023#include <linux/errno.h>
24#include <linux/signal.h>
25#include <linux/sched.h>
26#include <linux/timer.h>
27#include <linux/interrupt.h>
28#include <linux/tty.h>
29#include <linux/tty_flip.h>
30#include <linux/serial.h>
31#include <linux/serial_reg.h>
32#include <linux/major.h>
33#include <linux/string.h>
34#include <linux/fcntl.h>
35#include <linux/ptrace.h>
36#include <linux/gfp.h>
37#include <linux/ioport.h>
38#include <linux/mm.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070039#include <linux/delay.h>
40#include <linux/pci.h>
Jiri Slaby1977f032007-10-18 23:40:25 -070041#include <linux/bitops.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070042
43#include <asm/system.h>
44#include <asm/io.h>
45#include <asm/irq.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070046#include <asm/uaccess.h>
47
48#include "mxser.h"
49
Jiri Slaby502f2952009-09-10 12:20:07 +020050#define MXSER_VERSION "2.0.5" /* 1.14 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070051#define MXSERMAJOR 174
Linus Torvalds1da177e2005-04-16 15:20:36 -070052
Linus Torvalds1da177e2005-04-16 15:20:36 -070053#define MXSER_BOARDS 4 /* Max. boards */
Linus Torvalds1da177e2005-04-16 15:20:36 -070054#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */
Jiri Slaby1c456072008-02-07 00:16:46 -080055#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD)
56#define MXSER_ISR_PASS_LIMIT 100
Linus Torvalds1da177e2005-04-16 15:20:36 -070057
Jiri Slaby1c456072008-02-07 00:16:46 -080058/*CheckIsMoxaMust return value*/
59#define MOXA_OTHER_UART 0x00
60#define MOXA_MUST_MU150_HWID 0x01
61#define MOXA_MUST_MU860_HWID 0x02
62
Linus Torvalds1da177e2005-04-16 15:20:36 -070063#define WAKEUP_CHARS 256
64
65#define UART_MCR_AFE 0x20
66#define UART_LSR_SPECIAL 0x1E
67
Jiri Slabye129def2008-07-22 11:20:34 +010068#define PCI_DEVICE_ID_POS104UL 0x1044
Jiri Slaby1c456072008-02-07 00:16:46 -080069#define PCI_DEVICE_ID_CB108 0x1080
Jiri Slabye129def2008-07-22 11:20:34 +010070#define PCI_DEVICE_ID_CP102UF 0x1023
Jiri Slaby502f2952009-09-10 12:20:07 +020071#define PCI_DEVICE_ID_CP112UL 0x1120
Jiri Slaby1c456072008-02-07 00:16:46 -080072#define PCI_DEVICE_ID_CB114 0x1142
Jiri Slaby80ff8a82008-02-07 00:16:51 -080073#define PCI_DEVICE_ID_CP114UL 0x1143
Jiri Slaby1c456072008-02-07 00:16:46 -080074#define PCI_DEVICE_ID_CB134I 0x1341
75#define PCI_DEVICE_ID_CP138U 0x1380
Linus Torvalds1da177e2005-04-16 15:20:36 -070076
Linus Torvalds1da177e2005-04-16 15:20:36 -070077
78#define C168_ASIC_ID 1
79#define C104_ASIC_ID 2
80#define C102_ASIC_ID 0xB
81#define CI132_ASIC_ID 4
82#define CI134_ASIC_ID 3
83#define CI104J_ASIC_ID 5
84
Jiri Slaby1c456072008-02-07 00:16:46 -080085#define MXSER_HIGHBAUD 1
86#define MXSER_HAS2 2
Linus Torvalds1da177e2005-04-16 15:20:36 -070087
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -070088/* This is only for PCI */
Jiri Slaby1c456072008-02-07 00:16:46 -080089static const struct {
Linus Torvalds1da177e2005-04-16 15:20:36 -070090 int type;
91 int tx_fifo;
92 int rx_fifo;
93 int xmit_fifo_size;
94 int rx_high_water;
95 int rx_trigger;
96 int rx_low_water;
97 long max_baud;
Jiri Slaby1c456072008-02-07 00:16:46 -080098} Gpci_uart_info[] = {
Linus Torvalds1da177e2005-04-16 15:20:36 -070099 {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L},
100 {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L},
101 {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L}
102};
Jiri Slaby1c456072008-02-07 00:16:46 -0800103#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700104
Jiri Slaby1c456072008-02-07 00:16:46 -0800105struct mxser_cardinfo {
106 char *name;
107 unsigned int nports;
108 unsigned int flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700109};
110
Jiri Slaby1c456072008-02-07 00:16:46 -0800111static const struct mxser_cardinfo mxser_cards[] = {
112/* 0*/ { "C168 series", 8, },
113 { "C104 series", 4, },
114 { "CI-104J series", 4, },
115 { "C168H/PCI series", 8, },
116 { "C104H/PCI series", 4, },
117/* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */
118 { "CI-132 series", 4, MXSER_HAS2 },
119 { "CI-134 series", 4, },
120 { "CP-132 series", 2, },
121 { "CP-114 series", 4, },
122/*10*/ { "CT-114 series", 4, },
123 { "CP-102 series", 2, MXSER_HIGHBAUD },
124 { "CP-104U series", 4, },
125 { "CP-168U series", 8, },
126 { "CP-132U series", 2, },
127/*15*/ { "CP-134U series", 4, },
128 { "CP-104JU series", 4, },
129 { "Moxa UC7000 Serial", 8, }, /* RC7000 */
130 { "CP-118U series", 8, },
131 { "CP-102UL series", 2, },
132/*20*/ { "CP-102U series", 2, },
133 { "CP-118EL series", 8, },
134 { "CP-168EL series", 8, },
135 { "CP-104EL series", 4, },
136 { "CB-108 series", 8, },
137/*25*/ { "CB-114 series", 4, },
138 { "CB-134I series", 4, },
139 { "CP-138U series", 8, },
Jiri Slaby80ff8a82008-02-07 00:16:51 -0800140 { "POS-104UL series", 4, },
Jiri Slabye129def2008-07-22 11:20:34 +0100141 { "CP-114UL series", 4, },
Jiri Slaby502f2952009-09-10 12:20:07 +0200142/*30*/ { "CP-102UF series", 2, },
143 { "CP-112UL series", 2, },
Jiri Slaby1c456072008-02-07 00:16:46 -0800144};
145
146/* driver_data correspond to the lines in the structure above
147 see also ISA probe function before you change something */
148static struct pci_device_id mxser_pcibrds[] = {
149 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 },
150 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 },
151 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 },
152 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 },
153 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 },
154 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 },
155 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 },
156 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 },
157 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 },
158 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 },
159 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 },
160 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 },
161 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 },
162 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 },
163 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 },
164 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 },
165 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 },
166 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 },
167 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 },
168 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 },
169 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 },
170 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 },
171 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 },
Jiri Slaby80ff8a82008-02-07 00:16:51 -0800172 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 },
Jiri Slabye129def2008-07-22 11:20:34 +0100173 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 },
Jiri Slaby502f2952009-09-10 12:20:07 +0200174 { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL), .driver_data = 31 },
Jiri Slaby1c456072008-02-07 00:16:46 -0800175 { }
176};
Linus Torvalds1da177e2005-04-16 15:20:36 -0700177MODULE_DEVICE_TABLE(pci, mxser_pcibrds);
178
Jiri Slaby1df00922008-07-25 01:48:22 -0700179static unsigned long ioaddr[MXSER_BOARDS];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700180static int ttymajor = MXSERMAJOR;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700181
182/* Variables for insmod */
183
184MODULE_AUTHOR("Casper Yang");
185MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver");
Jiri Slaby1df00922008-07-25 01:48:22 -0700186module_param_array(ioaddr, ulong, NULL, 0);
187MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board");
Rusty Russell8d3b33f2006-03-25 03:07:05 -0800188module_param(ttymajor, int, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700189MODULE_LICENSE("GPL");
190
191struct mxser_log {
192 int tick;
193 unsigned long rxcnt[MXSER_PORTS];
194 unsigned long txcnt[MXSER_PORTS];
195};
196
Linus Torvalds1da177e2005-04-16 15:20:36 -0700197struct mxser_mon {
198 unsigned long rxcnt;
199 unsigned long txcnt;
200 unsigned long up_rxcnt;
201 unsigned long up_txcnt;
202 int modem_status;
203 unsigned char hold_reason;
204};
205
206struct mxser_mon_ext {
207 unsigned long rx_cnt[32];
208 unsigned long tx_cnt[32];
209 unsigned long up_rxcnt[32];
210 unsigned long up_txcnt[32];
211 int modem_status[32];
212
213 long baudrate[32];
214 int databits[32];
215 int stopbits[32];
216 int parity[32];
217 int flowctrl[32];
218 int fifo[32];
219 int iftype[32];
220};
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -0700221
Jiri Slaby1c456072008-02-07 00:16:46 -0800222struct mxser_board;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700223
Jiri Slaby1c456072008-02-07 00:16:46 -0800224struct mxser_port {
Alan Cox0ad9e7d2008-07-16 21:56:10 +0100225 struct tty_port port;
Jiri Slaby1c456072008-02-07 00:16:46 -0800226 struct mxser_board *board;
Jiri Slaby1c456072008-02-07 00:16:46 -0800227
228 unsigned long ioaddr;
229 unsigned long opmode_ioaddr;
230 int max_baud;
231
Linus Torvalds1da177e2005-04-16 15:20:36 -0700232 int rx_high_water;
233 int rx_trigger; /* Rx fifo trigger level */
234 int rx_low_water;
235 int baud_base; /* max. speed */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700236 int type; /* UART type */
Jiri Slaby1c456072008-02-07 00:16:46 -0800237
238 int x_char; /* xon/xoff character */
239 int IER; /* Interrupt Enable Register */
240 int MCR; /* Modem control register */
241
242 unsigned char stop_rx;
243 unsigned char ldisc_stop_rx;
244
245 int custom_divisor;
Jiri Slaby1c456072008-02-07 00:16:46 -0800246 unsigned char err_shadow;
Jiri Slaby1c456072008-02-07 00:16:46 -0800247
Jiri Slaby1c456072008-02-07 00:16:46 -0800248 struct async_icount icount; /* kernel counters for 4 input interrupts */
249 int timeout;
250
Linus Torvalds1da177e2005-04-16 15:20:36 -0700251 int read_status_mask;
252 int ignore_status_mask;
253 int xmit_fifo_size;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700254 int xmit_head;
255 int xmit_tail;
256 int xmit_cnt;
Jiri Slaby1c456072008-02-07 00:16:46 -0800257
Alan Cox606d0992006-12-08 02:38:45 -0800258 struct ktermios normal_termios;
Jiri Slaby1c456072008-02-07 00:16:46 -0800259
Linus Torvalds1da177e2005-04-16 15:20:36 -0700260 struct mxser_mon mon_data;
Jiri Slaby1c456072008-02-07 00:16:46 -0800261
Linus Torvalds1da177e2005-04-16 15:20:36 -0700262 spinlock_t slock;
Jiri Slaby1c456072008-02-07 00:16:46 -0800263};
264
265struct mxser_board {
266 unsigned int idx;
267 int irq;
268 const struct mxser_cardinfo *info;
269 unsigned long vector;
270 unsigned long vector_mask;
271
272 int chip_flag;
273 int uart_type;
274
275 struct mxser_port ports[MXSER_PORTS_PER_BOARD];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700276};
277
Linus Torvalds1da177e2005-04-16 15:20:36 -0700278struct mxser_mstatus {
279 tcflag_t cflag;
280 int cts;
281 int dsr;
282 int ri;
283 int dcd;
284};
285
Jiri Slaby1c456072008-02-07 00:16:46 -0800286static struct mxser_board mxser_boards[MXSER_BOARDS];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700287static struct tty_driver *mxvar_sdriver;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288static struct mxser_log mxvar_log;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700289static int mxser_set_baud_method[MXSER_PORTS + 1];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700290
Christoph Hellwig148ff862008-04-30 00:54:29 -0700291static void mxser_enable_must_enchance_mode(unsigned long baseio)
292{
293 u8 oldlcr;
294 u8 efr;
295
296 oldlcr = inb(baseio + UART_LCR);
297 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
298
299 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
300 efr |= MOXA_MUST_EFR_EFRB_ENABLE;
301
302 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
303 outb(oldlcr, baseio + UART_LCR);
304}
305
306static void mxser_disable_must_enchance_mode(unsigned long baseio)
307{
308 u8 oldlcr;
309 u8 efr;
310
311 oldlcr = inb(baseio + UART_LCR);
312 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
313
314 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
315 efr &= ~MOXA_MUST_EFR_EFRB_ENABLE;
316
317 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
318 outb(oldlcr, baseio + UART_LCR);
319}
320
321static void mxser_set_must_xon1_value(unsigned long baseio, u8 value)
322{
323 u8 oldlcr;
324 u8 efr;
325
326 oldlcr = inb(baseio + UART_LCR);
327 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
328
329 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
330 efr &= ~MOXA_MUST_EFR_BANK_MASK;
331 efr |= MOXA_MUST_EFR_BANK0;
332
333 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
334 outb(value, baseio + MOXA_MUST_XON1_REGISTER);
335 outb(oldlcr, baseio + UART_LCR);
336}
337
338static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value)
339{
340 u8 oldlcr;
341 u8 efr;
342
343 oldlcr = inb(baseio + UART_LCR);
344 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
345
346 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
347 efr &= ~MOXA_MUST_EFR_BANK_MASK;
348 efr |= MOXA_MUST_EFR_BANK0;
349
350 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
351 outb(value, baseio + MOXA_MUST_XOFF1_REGISTER);
352 outb(oldlcr, baseio + UART_LCR);
353}
354
355static void mxser_set_must_fifo_value(struct mxser_port *info)
356{
357 u8 oldlcr;
358 u8 efr;
359
360 oldlcr = inb(info->ioaddr + UART_LCR);
361 outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR);
362
363 efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER);
364 efr &= ~MOXA_MUST_EFR_BANK_MASK;
365 efr |= MOXA_MUST_EFR_BANK1;
366
367 outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER);
368 outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER);
369 outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER);
370 outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER);
371 outb(oldlcr, info->ioaddr + UART_LCR);
372}
373
374static void mxser_set_must_enum_value(unsigned long baseio, u8 value)
375{
376 u8 oldlcr;
377 u8 efr;
378
379 oldlcr = inb(baseio + UART_LCR);
380 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
381
382 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
383 efr &= ~MOXA_MUST_EFR_BANK_MASK;
384 efr |= MOXA_MUST_EFR_BANK2;
385
386 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
387 outb(value, baseio + MOXA_MUST_ENUM_REGISTER);
388 outb(oldlcr, baseio + UART_LCR);
389}
390
391static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId)
392{
393 u8 oldlcr;
394 u8 efr;
395
396 oldlcr = inb(baseio + UART_LCR);
397 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
398
399 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
400 efr &= ~MOXA_MUST_EFR_BANK_MASK;
401 efr |= MOXA_MUST_EFR_BANK2;
402
403 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
404 *pId = inb(baseio + MOXA_MUST_HWID_REGISTER);
405 outb(oldlcr, baseio + UART_LCR);
406}
407
408static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio)
409{
410 u8 oldlcr;
411 u8 efr;
412
413 oldlcr = inb(baseio + UART_LCR);
414 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
415
416 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
417 efr &= ~MOXA_MUST_EFR_SF_MASK;
418
419 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
420 outb(oldlcr, baseio + UART_LCR);
421}
422
423static void mxser_enable_must_tx_software_flow_control(unsigned long baseio)
424{
425 u8 oldlcr;
426 u8 efr;
427
428 oldlcr = inb(baseio + UART_LCR);
429 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
430
431 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
432 efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
433 efr |= MOXA_MUST_EFR_SF_TX1;
434
435 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
436 outb(oldlcr, baseio + UART_LCR);
437}
438
439static void mxser_disable_must_tx_software_flow_control(unsigned long baseio)
440{
441 u8 oldlcr;
442 u8 efr;
443
444 oldlcr = inb(baseio + UART_LCR);
445 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
446
447 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
448 efr &= ~MOXA_MUST_EFR_SF_TX_MASK;
449
450 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
451 outb(oldlcr, baseio + UART_LCR);
452}
453
454static void mxser_enable_must_rx_software_flow_control(unsigned long baseio)
455{
456 u8 oldlcr;
457 u8 efr;
458
459 oldlcr = inb(baseio + UART_LCR);
460 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
461
462 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
463 efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
464 efr |= MOXA_MUST_EFR_SF_RX1;
465
466 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
467 outb(oldlcr, baseio + UART_LCR);
468}
469
470static void mxser_disable_must_rx_software_flow_control(unsigned long baseio)
471{
472 u8 oldlcr;
473 u8 efr;
474
475 oldlcr = inb(baseio + UART_LCR);
476 outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR);
477
478 efr = inb(baseio + MOXA_MUST_EFR_REGISTER);
479 efr &= ~MOXA_MUST_EFR_SF_RX_MASK;
480
481 outb(efr, baseio + MOXA_MUST_EFR_REGISTER);
482 outb(oldlcr, baseio + UART_LCR);
483}
484
Jesper Juhlb8cc5542007-10-18 03:06:03 -0700485#ifdef CONFIG_PCI
Jiri Slaby1c456072008-02-07 00:16:46 -0800486static int __devinit CheckIsMoxaMust(unsigned long io)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700487{
488 u8 oldmcr, hwid;
489 int i;
490
491 outb(0, io + UART_LCR);
Christoph Hellwig148ff862008-04-30 00:54:29 -0700492 mxser_disable_must_enchance_mode(io);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700493 oldmcr = inb(io + UART_MCR);
494 outb(0, io + UART_MCR);
Christoph Hellwig148ff862008-04-30 00:54:29 -0700495 mxser_set_must_xon1_value(io, 0x11);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700496 if ((hwid = inb(io + UART_MCR)) != 0) {
497 outb(oldmcr, io + UART_MCR);
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -0700498 return MOXA_OTHER_UART;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700499 }
500
Christoph Hellwig148ff862008-04-30 00:54:29 -0700501 mxser_get_must_hardware_id(io, &hwid);
Jiri Slaby1c456072008-02-07 00:16:46 -0800502 for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */
503 if (hwid == Gpci_uart_info[i].type)
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -0700504 return (int)hwid;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700505 }
506 return MOXA_OTHER_UART;
507}
Jesper Juhlb8cc5542007-10-18 03:06:03 -0700508#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700509
Jiri Slaby1c456072008-02-07 00:16:46 -0800510static void process_txrx_fifo(struct mxser_port *info)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700511{
512 int i;
513
514 if ((info->type == PORT_16450) || (info->type == PORT_8250)) {
515 info->rx_trigger = 1;
516 info->rx_high_water = 1;
517 info->rx_low_water = 1;
518 info->xmit_fifo_size = 1;
Jiri Slaby1c456072008-02-07 00:16:46 -0800519 } else
520 for (i = 0; i < UART_INFO_NUM; i++)
521 if (info->board->chip_flag == Gpci_uart_info[i].type) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700522 info->rx_trigger = Gpci_uart_info[i].rx_trigger;
523 info->rx_low_water = Gpci_uart_info[i].rx_low_water;
524 info->rx_high_water = Gpci_uart_info[i].rx_high_water;
525 info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size;
526 break;
527 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700528}
529
Jiri Slaby1c456072008-02-07 00:16:46 -0800530static unsigned char mxser_get_msr(int baseaddr, int mode, int port)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700531{
Jiri Slaby72800df2008-07-25 01:48:20 -0700532 static unsigned char mxser_msr[MXSER_PORTS + 1];
Linus Torvalds1da177e2005-04-16 15:20:36 -0700533 unsigned char status = 0;
534
535 status = inb(baseaddr + UART_MSR);
536
537 mxser_msr[port] &= 0x0F;
538 mxser_msr[port] |= status;
539 status = mxser_msr[port];
540 if (mode)
541 mxser_msr[port] = 0;
542
543 return status;
544}
545
Alan Cox31f35932009-01-02 13:45:05 +0000546static int mxser_carrier_raised(struct tty_port *port)
547{
548 struct mxser_port *mp = container_of(port, struct mxser_port, port);
549 return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0;
550}
551
Alan Coxfcc8ac12009-06-11 12:24:17 +0100552static void mxser_dtr_rts(struct tty_port *port, int on)
Alan Cox5d951fb2009-01-02 13:45:19 +0000553{
554 struct mxser_port *mp = container_of(port, struct mxser_port, port);
555 unsigned long flags;
556
557 spin_lock_irqsave(&mp->slock, flags);
Alan Coxfcc8ac12009-06-11 12:24:17 +0100558 if (on)
559 outb(inb(mp->ioaddr + UART_MCR) |
560 UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR);
561 else
562 outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS),
563 mp->ioaddr + UART_MCR);
Alan Cox5d951fb2009-01-02 13:45:19 +0000564 spin_unlock_irqrestore(&mp->slock, flags);
565}
566
Alan Cox216ba022008-10-13 10:40:19 +0100567static int mxser_set_baud(struct tty_struct *tty, long newspd)
Jiri Slaby1c456072008-02-07 00:16:46 -0800568{
Alan Cox216ba022008-10-13 10:40:19 +0100569 struct mxser_port *info = tty->driver_data;
Jiri Slaby1c456072008-02-07 00:16:46 -0800570 int quot = 0, baud;
571 unsigned char cval;
572
Alan Cox216ba022008-10-13 10:40:19 +0100573 if (!info->ioaddr)
Jiri Slaby1c456072008-02-07 00:16:46 -0800574 return -1;
575
576 if (newspd > info->max_baud)
577 return -1;
578
579 if (newspd == 134) {
580 quot = 2 * info->baud_base / 269;
Alan Cox216ba022008-10-13 10:40:19 +0100581 tty_encode_baud_rate(tty, 134, 134);
Jiri Slaby1c456072008-02-07 00:16:46 -0800582 } else if (newspd) {
583 quot = info->baud_base / newspd;
584 if (quot == 0)
585 quot = 1;
586 baud = info->baud_base/quot;
Alan Cox216ba022008-10-13 10:40:19 +0100587 tty_encode_baud_rate(tty, baud, baud);
Jiri Slaby1c456072008-02-07 00:16:46 -0800588 } else {
589 quot = 0;
590 }
591
592 info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base);
593 info->timeout += HZ / 50; /* Add .02 seconds of slop */
594
595 if (quot) {
596 info->MCR |= UART_MCR_DTR;
597 outb(info->MCR, info->ioaddr + UART_MCR);
598 } else {
599 info->MCR &= ~UART_MCR_DTR;
600 outb(info->MCR, info->ioaddr + UART_MCR);
601 return 0;
602 }
603
604 cval = inb(info->ioaddr + UART_LCR);
605
606 outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */
607
608 outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */
609 outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */
610 outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */
611
612#ifdef BOTHER
Alan Cox216ba022008-10-13 10:40:19 +0100613 if (C_BAUD(tty) == BOTHER) {
Jiri Slaby1c456072008-02-07 00:16:46 -0800614 quot = info->baud_base % newspd;
615 quot *= 8;
616 if (quot % newspd > newspd / 2) {
617 quot /= newspd;
618 quot++;
619 } else
620 quot /= newspd;
621
Christoph Hellwig148ff862008-04-30 00:54:29 -0700622 mxser_set_must_enum_value(info->ioaddr, quot);
Jiri Slaby1c456072008-02-07 00:16:46 -0800623 } else
624#endif
Christoph Hellwig148ff862008-04-30 00:54:29 -0700625 mxser_set_must_enum_value(info->ioaddr, 0);
Jiri Slaby1c456072008-02-07 00:16:46 -0800626
627 return 0;
628}
629
630/*
631 * This routine is called to set the UART divisor registers to match
632 * the specified baud rate for a serial port.
633 */
Alan Cox216ba022008-10-13 10:40:19 +0100634static int mxser_change_speed(struct tty_struct *tty,
635 struct ktermios *old_termios)
Jiri Slaby1c456072008-02-07 00:16:46 -0800636{
Alan Cox216ba022008-10-13 10:40:19 +0100637 struct mxser_port *info = tty->driver_data;
Jiri Slaby1c456072008-02-07 00:16:46 -0800638 unsigned cflag, cval, fcr;
639 int ret = 0;
640 unsigned char status;
641
Alan Cox216ba022008-10-13 10:40:19 +0100642 cflag = tty->termios->c_cflag;
643 if (!info->ioaddr)
Jiri Slaby1c456072008-02-07 00:16:46 -0800644 return ret;
645
Alan Cox216ba022008-10-13 10:40:19 +0100646 if (mxser_set_baud_method[tty->index] == 0)
647 mxser_set_baud(tty, tty_get_baud_rate(tty));
Jiri Slaby1c456072008-02-07 00:16:46 -0800648
649 /* byte size and parity */
650 switch (cflag & CSIZE) {
651 case CS5:
652 cval = 0x00;
653 break;
654 case CS6:
655 cval = 0x01;
656 break;
657 case CS7:
658 cval = 0x02;
659 break;
660 case CS8:
661 cval = 0x03;
662 break;
663 default:
664 cval = 0x00;
665 break; /* too keep GCC shut... */
666 }
667 if (cflag & CSTOPB)
668 cval |= 0x04;
669 if (cflag & PARENB)
670 cval |= UART_LCR_PARITY;
671 if (!(cflag & PARODD))
672 cval |= UART_LCR_EPAR;
673 if (cflag & CMSPAR)
674 cval |= UART_LCR_SPAR;
675
676 if ((info->type == PORT_8250) || (info->type == PORT_16450)) {
677 if (info->board->chip_flag) {
678 fcr = UART_FCR_ENABLE_FIFO;
679 fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
Christoph Hellwig148ff862008-04-30 00:54:29 -0700680 mxser_set_must_fifo_value(info);
Jiri Slaby1c456072008-02-07 00:16:46 -0800681 } else
682 fcr = 0;
683 } else {
684 fcr = UART_FCR_ENABLE_FIFO;
685 if (info->board->chip_flag) {
686 fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
Christoph Hellwig148ff862008-04-30 00:54:29 -0700687 mxser_set_must_fifo_value(info);
Jiri Slaby1c456072008-02-07 00:16:46 -0800688 } else {
689 switch (info->rx_trigger) {
690 case 1:
691 fcr |= UART_FCR_TRIGGER_1;
692 break;
693 case 4:
694 fcr |= UART_FCR_TRIGGER_4;
695 break;
696 case 8:
697 fcr |= UART_FCR_TRIGGER_8;
698 break;
699 default:
700 fcr |= UART_FCR_TRIGGER_14;
701 break;
702 }
703 }
704 }
705
706 /* CTS flow control flag and modem status interrupts */
707 info->IER &= ~UART_IER_MSI;
708 info->MCR &= ~UART_MCR_AFE;
709 if (cflag & CRTSCTS) {
Alan Cox0ad9e7d2008-07-16 21:56:10 +0100710 info->port.flags |= ASYNC_CTS_FLOW;
Jiri Slaby1c456072008-02-07 00:16:46 -0800711 info->IER |= UART_IER_MSI;
712 if ((info->type == PORT_16550A) || (info->board->chip_flag)) {
713 info->MCR |= UART_MCR_AFE;
714 } else {
715 status = inb(info->ioaddr + UART_MSR);
Alan Cox216ba022008-10-13 10:40:19 +0100716 if (tty->hw_stopped) {
Jiri Slaby1c456072008-02-07 00:16:46 -0800717 if (status & UART_MSR_CTS) {
Alan Cox216ba022008-10-13 10:40:19 +0100718 tty->hw_stopped = 0;
Jiri Slaby1c456072008-02-07 00:16:46 -0800719 if (info->type != PORT_16550A &&
720 !info->board->chip_flag) {
721 outb(info->IER & ~UART_IER_THRI,
722 info->ioaddr +
723 UART_IER);
724 info->IER |= UART_IER_THRI;
725 outb(info->IER, info->ioaddr +
726 UART_IER);
727 }
Alan Cox216ba022008-10-13 10:40:19 +0100728 tty_wakeup(tty);
Jiri Slaby1c456072008-02-07 00:16:46 -0800729 }
730 } else {
731 if (!(status & UART_MSR_CTS)) {
Alan Cox216ba022008-10-13 10:40:19 +0100732 tty->hw_stopped = 1;
Jiri Slaby1c456072008-02-07 00:16:46 -0800733 if ((info->type != PORT_16550A) &&
734 (!info->board->chip_flag)) {
735 info->IER &= ~UART_IER_THRI;
736 outb(info->IER, info->ioaddr +
737 UART_IER);
738 }
739 }
740 }
741 }
742 } else {
Alan Cox0ad9e7d2008-07-16 21:56:10 +0100743 info->port.flags &= ~ASYNC_CTS_FLOW;
Jiri Slaby1c456072008-02-07 00:16:46 -0800744 }
745 outb(info->MCR, info->ioaddr + UART_MCR);
746 if (cflag & CLOCAL) {
Alan Cox0ad9e7d2008-07-16 21:56:10 +0100747 info->port.flags &= ~ASYNC_CHECK_CD;
Jiri Slaby1c456072008-02-07 00:16:46 -0800748 } else {
Alan Cox0ad9e7d2008-07-16 21:56:10 +0100749 info->port.flags |= ASYNC_CHECK_CD;
Jiri Slaby1c456072008-02-07 00:16:46 -0800750 info->IER |= UART_IER_MSI;
751 }
752 outb(info->IER, info->ioaddr + UART_IER);
753
754 /*
755 * Set up parity check flag
756 */
757 info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
Alan Cox216ba022008-10-13 10:40:19 +0100758 if (I_INPCK(tty))
Jiri Slaby1c456072008-02-07 00:16:46 -0800759 info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
Alan Cox216ba022008-10-13 10:40:19 +0100760 if (I_BRKINT(tty) || I_PARMRK(tty))
Jiri Slaby1c456072008-02-07 00:16:46 -0800761 info->read_status_mask |= UART_LSR_BI;
762
763 info->ignore_status_mask = 0;
764
Alan Cox216ba022008-10-13 10:40:19 +0100765 if (I_IGNBRK(tty)) {
Jiri Slaby1c456072008-02-07 00:16:46 -0800766 info->ignore_status_mask |= UART_LSR_BI;
767 info->read_status_mask |= UART_LSR_BI;
768 /*
769 * If we're ignore parity and break indicators, ignore
770 * overruns too. (For real raw support).
771 */
Alan Cox216ba022008-10-13 10:40:19 +0100772 if (I_IGNPAR(tty)) {
Jiri Slaby1c456072008-02-07 00:16:46 -0800773 info->ignore_status_mask |=
774 UART_LSR_OE |
775 UART_LSR_PE |
776 UART_LSR_FE;
777 info->read_status_mask |=
778 UART_LSR_OE |
779 UART_LSR_PE |
780 UART_LSR_FE;
781 }
782 }
783 if (info->board->chip_flag) {
Alan Cox216ba022008-10-13 10:40:19 +0100784 mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty));
785 mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty));
786 if (I_IXON(tty)) {
Christoph Hellwig148ff862008-04-30 00:54:29 -0700787 mxser_enable_must_rx_software_flow_control(
788 info->ioaddr);
Jiri Slaby1c456072008-02-07 00:16:46 -0800789 } else {
Christoph Hellwig148ff862008-04-30 00:54:29 -0700790 mxser_disable_must_rx_software_flow_control(
791 info->ioaddr);
Jiri Slaby1c456072008-02-07 00:16:46 -0800792 }
Alan Cox216ba022008-10-13 10:40:19 +0100793 if (I_IXOFF(tty)) {
Christoph Hellwig148ff862008-04-30 00:54:29 -0700794 mxser_enable_must_tx_software_flow_control(
795 info->ioaddr);
Jiri Slaby1c456072008-02-07 00:16:46 -0800796 } else {
Christoph Hellwig148ff862008-04-30 00:54:29 -0700797 mxser_disable_must_tx_software_flow_control(
798 info->ioaddr);
Jiri Slaby1c456072008-02-07 00:16:46 -0800799 }
800 }
801
802
803 outb(fcr, info->ioaddr + UART_FCR); /* set fcr */
804 outb(cval, info->ioaddr + UART_LCR);
805
806 return ret;
807}
808
Alan Cox216ba022008-10-13 10:40:19 +0100809static void mxser_check_modem_status(struct tty_struct *tty,
810 struct mxser_port *port, int status)
Jiri Slaby1c456072008-02-07 00:16:46 -0800811{
812 /* update input line counters */
813 if (status & UART_MSR_TERI)
814 port->icount.rng++;
815 if (status & UART_MSR_DDSR)
816 port->icount.dsr++;
817 if (status & UART_MSR_DDCD)
818 port->icount.dcd++;
819 if (status & UART_MSR_DCTS)
820 port->icount.cts++;
821 port->mon_data.modem_status = status;
Alan Coxbdc04e32009-09-19 13:13:31 -0700822 wake_up_interruptible(&port->port.delta_msr_wait);
Jiri Slaby1c456072008-02-07 00:16:46 -0800823
Alan Cox0ad9e7d2008-07-16 21:56:10 +0100824 if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
Jiri Slaby1c456072008-02-07 00:16:46 -0800825 if (status & UART_MSR_DCD)
Alan Cox0ad9e7d2008-07-16 21:56:10 +0100826 wake_up_interruptible(&port->port.open_wait);
Jiri Slaby1c456072008-02-07 00:16:46 -0800827 }
828
Alan Cox0ad9e7d2008-07-16 21:56:10 +0100829 if (port->port.flags & ASYNC_CTS_FLOW) {
Alan Cox216ba022008-10-13 10:40:19 +0100830 if (tty->hw_stopped) {
Jiri Slaby1c456072008-02-07 00:16:46 -0800831 if (status & UART_MSR_CTS) {
Alan Cox216ba022008-10-13 10:40:19 +0100832 tty->hw_stopped = 0;
Jiri Slaby1c456072008-02-07 00:16:46 -0800833
834 if ((port->type != PORT_16550A) &&
835 (!port->board->chip_flag)) {
836 outb(port->IER & ~UART_IER_THRI,
837 port->ioaddr + UART_IER);
838 port->IER |= UART_IER_THRI;
839 outb(port->IER, port->ioaddr +
840 UART_IER);
841 }
Alan Cox216ba022008-10-13 10:40:19 +0100842 tty_wakeup(tty);
Jiri Slaby1c456072008-02-07 00:16:46 -0800843 }
844 } else {
845 if (!(status & UART_MSR_CTS)) {
Alan Cox216ba022008-10-13 10:40:19 +0100846 tty->hw_stopped = 1;
Jiri Slaby1c456072008-02-07 00:16:46 -0800847 if (port->type != PORT_16550A &&
848 !port->board->chip_flag) {
849 port->IER &= ~UART_IER_THRI;
850 outb(port->IER, port->ioaddr +
851 UART_IER);
852 }
853 }
854 }
855 }
856}
857
Alan Cox67691402009-11-30 13:17:35 +0000858static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
Jiri Slaby1c456072008-02-07 00:16:46 -0800859{
Alan Cox67691402009-11-30 13:17:35 +0000860 struct mxser_port *info = container_of(port, struct mxser_port, port);
Jiri Slaby1c456072008-02-07 00:16:46 -0800861 unsigned long page;
862 unsigned long flags;
863
864 page = __get_free_page(GFP_KERNEL);
865 if (!page)
866 return -ENOMEM;
867
868 spin_lock_irqsave(&info->slock, flags);
869
Jiri Slaby1c456072008-02-07 00:16:46 -0800870 if (!info->ioaddr || !info->type) {
Alan Cox216ba022008-10-13 10:40:19 +0100871 set_bit(TTY_IO_ERROR, &tty->flags);
Jiri Slaby1c456072008-02-07 00:16:46 -0800872 free_page(page);
873 spin_unlock_irqrestore(&info->slock, flags);
874 return 0;
875 }
Alan Cox67691402009-11-30 13:17:35 +0000876 info->port.xmit_buf = (unsigned char *) page;
Jiri Slaby1c456072008-02-07 00:16:46 -0800877
878 /*
879 * Clear the FIFO buffers and disable them
880 * (they will be reenabled in mxser_change_speed())
881 */
882 if (info->board->chip_flag)
883 outb((UART_FCR_CLEAR_RCVR |
884 UART_FCR_CLEAR_XMIT |
885 MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR);
886 else
887 outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
888 info->ioaddr + UART_FCR);
889
890 /*
891 * At this point there's no way the LSR could still be 0xFF;
892 * if it is, then bail out, because there's likely no UART
893 * here.
894 */
895 if (inb(info->ioaddr + UART_LSR) == 0xff) {
896 spin_unlock_irqrestore(&info->slock, flags);
897 if (capable(CAP_SYS_ADMIN)) {
Alan Cox216ba022008-10-13 10:40:19 +0100898 if (tty)
899 set_bit(TTY_IO_ERROR, &tty->flags);
Jiri Slaby1c456072008-02-07 00:16:46 -0800900 return 0;
901 } else
902 return -ENODEV;
903 }
904
905 /*
906 * Clear the interrupt registers.
907 */
908 (void) inb(info->ioaddr + UART_LSR);
909 (void) inb(info->ioaddr + UART_RX);
910 (void) inb(info->ioaddr + UART_IIR);
911 (void) inb(info->ioaddr + UART_MSR);
912
913 /*
914 * Now, initialize the UART
915 */
916 outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */
917 info->MCR = UART_MCR_DTR | UART_MCR_RTS;
918 outb(info->MCR, info->ioaddr + UART_MCR);
919
920 /*
921 * Finally, enable interrupts
922 */
923 info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
924
925 if (info->board->chip_flag)
926 info->IER |= MOXA_MUST_IER_EGDAI;
927 outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */
928
929 /*
930 * And clear the interrupt registers again for luck.
931 */
932 (void) inb(info->ioaddr + UART_LSR);
933 (void) inb(info->ioaddr + UART_RX);
934 (void) inb(info->ioaddr + UART_IIR);
935 (void) inb(info->ioaddr + UART_MSR);
936
Alan Cox216ba022008-10-13 10:40:19 +0100937 clear_bit(TTY_IO_ERROR, &tty->flags);
Jiri Slaby1c456072008-02-07 00:16:46 -0800938 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
939
940 /*
941 * and set the speed of the serial port
942 */
Alan Cox216ba022008-10-13 10:40:19 +0100943 mxser_change_speed(tty, NULL);
Jiri Slaby1c456072008-02-07 00:16:46 -0800944 spin_unlock_irqrestore(&info->slock, flags);
945
946 return 0;
947}
948
949/*
Alan Cox67691402009-11-30 13:17:35 +0000950 * This routine will shutdown a serial port
Jiri Slaby1c456072008-02-07 00:16:46 -0800951 */
Alan Cox67691402009-11-30 13:17:35 +0000952static void mxser_shutdown_port(struct tty_port *port)
Jiri Slaby1c456072008-02-07 00:16:46 -0800953{
Alan Cox67691402009-11-30 13:17:35 +0000954 struct mxser_port *info = container_of(port, struct mxser_port, port);
Jiri Slaby1c456072008-02-07 00:16:46 -0800955 unsigned long flags;
956
Jiri Slaby1c456072008-02-07 00:16:46 -0800957 spin_lock_irqsave(&info->slock, flags);
958
959 /*
960 * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
961 * here so the queue might never be waken up
962 */
Alan Coxbdc04e32009-09-19 13:13:31 -0700963 wake_up_interruptible(&info->port.delta_msr_wait);
Jiri Slaby1c456072008-02-07 00:16:46 -0800964
965 /*
Alan Cox67691402009-11-30 13:17:35 +0000966 * Free the xmit buffer, if necessary
Jiri Slaby1c456072008-02-07 00:16:46 -0800967 */
Alan Cox0ad9e7d2008-07-16 21:56:10 +0100968 if (info->port.xmit_buf) {
969 free_page((unsigned long) info->port.xmit_buf);
970 info->port.xmit_buf = NULL;
Jiri Slaby1c456072008-02-07 00:16:46 -0800971 }
972
973 info->IER = 0;
974 outb(0x00, info->ioaddr + UART_IER);
975
Jiri Slaby1c456072008-02-07 00:16:46 -0800976 /* clear Rx/Tx FIFO's */
977 if (info->board->chip_flag)
978 outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
979 MOXA_MUST_FCR_GDA_MODE_ENABLE,
980 info->ioaddr + UART_FCR);
981 else
982 outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
983 info->ioaddr + UART_FCR);
984
985 /* read data port to reset things */
986 (void) inb(info->ioaddr + UART_RX);
987
Jiri Slaby1c456072008-02-07 00:16:46 -0800988
989 if (info->board->chip_flag)
990 SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr);
991
992 spin_unlock_irqrestore(&info->slock, flags);
993}
994
Linus Torvalds1da177e2005-04-16 15:20:36 -0700995/*
996 * This routine is called whenever a serial port is opened. It
997 * enables interrupts for a serial port, linking in its async structure into
998 * the IRQ chain. It also performs the serial-specific
999 * initialization for the tty structure.
1000 */
1001static int mxser_open(struct tty_struct *tty, struct file *filp)
1002{
Jiri Slaby1c456072008-02-07 00:16:46 -08001003 struct mxser_port *info;
Alan Cox67691402009-11-30 13:17:35 +00001004 int line;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001005
1006 line = tty->index;
1007 if (line == MXSER_PORTS)
1008 return 0;
1009 if (line < 0 || line > MXSER_PORTS)
1010 return -ENODEV;
Jiri Slaby1c456072008-02-07 00:16:46 -08001011 info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD];
1012 if (!info->ioaddr)
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07001013 return -ENODEV;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001014
Alan Cox67691402009-11-30 13:17:35 +00001015 return tty_port_open(&info->port, tty, filp);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001016}
1017
Alan Cox978e5952008-04-30 00:53:59 -07001018static void mxser_flush_buffer(struct tty_struct *tty)
1019{
1020 struct mxser_port *info = tty->driver_data;
1021 char fcr;
1022 unsigned long flags;
1023
1024
1025 spin_lock_irqsave(&info->slock, flags);
1026 info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
1027
1028 fcr = inb(info->ioaddr + UART_FCR);
1029 outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
1030 info->ioaddr + UART_FCR);
1031 outb(fcr, info->ioaddr + UART_FCR);
1032
1033 spin_unlock_irqrestore(&info->slock, flags);
1034
1035 tty_wakeup(tty);
1036}
1037
1038
Alan Cox67691402009-11-30 13:17:35 +00001039static void mxser_close_port(struct tty_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001040{
Alan Cox1e2b0252009-09-19 13:13:21 -07001041 struct mxser_port *info = container_of(port, struct mxser_port, port);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001042 unsigned long timeout;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001043 /*
Linus Torvalds1da177e2005-04-16 15:20:36 -07001044 * At this point we stop accepting input. To do this, we
1045 * disable the receive line status interrupts, and tell the
1046 * interrupt driver to stop checking the data ready bit in the
1047 * line status register.
1048 */
1049 info->IER &= ~UART_IER_RLSI;
Jiri Slaby1c456072008-02-07 00:16:46 -08001050 if (info->board->chip_flag)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001051 info->IER &= ~MOXA_MUST_RECV_ISR;
Jiri Slaby1c456072008-02-07 00:16:46 -08001052
Alan Cox67691402009-11-30 13:17:35 +00001053 outb(info->IER, info->ioaddr + UART_IER);
1054 /*
1055 * Before we drop DTR, make sure the UART transmitter
1056 * has completely drained; this is especially
1057 * important if there is a transmit FIFO!
1058 */
1059 timeout = jiffies + HZ;
1060 while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) {
1061 schedule_timeout_interruptible(5);
1062 if (time_after(jiffies, timeout))
1063 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001064 }
Alan Cox1e2b0252009-09-19 13:13:21 -07001065}
1066
1067/*
1068 * This routine is called when the serial port gets closed. First, we
1069 * wait for the last remaining data to be sent. Then, we unlink its
1070 * async structure from the interrupt chain if necessary, and we free
1071 * that IRQ if nothing is left in the chain.
1072 */
1073static void mxser_close(struct tty_struct *tty, struct file *filp)
1074{
1075 struct mxser_port *info = tty->driver_data;
1076 struct tty_port *port = &info->port;
1077
1078 if (tty->index == MXSER_PORTS)
1079 return;
1080 if (tty_port_close_start(port, tty, filp) == 0)
1081 return;
Alan Cox67691402009-11-30 13:17:35 +00001082 mutex_lock(&port->mutex);
1083 mxser_close_port(port);
Alan Cox1e2b0252009-09-19 13:13:21 -07001084 mxser_flush_buffer(tty);
Alan Cox67691402009-11-30 13:17:35 +00001085 mxser_shutdown_port(port);
1086 clear_bit(ASYNCB_INITIALIZED, &port->flags);
1087 mutex_unlock(&port->mutex);
Alan Coxa6614992009-01-02 13:46:50 +00001088 /* Right now the tty_port set is done outside of the close_end helper
1089 as we don't yet have everyone using refcounts */
1090 tty_port_close_end(port, tty);
1091 tty_port_tty_set(port, NULL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001092}
1093
1094static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count)
1095{
1096 int c, total = 0;
Jiri Slaby1c456072008-02-07 00:16:46 -08001097 struct mxser_port *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001098 unsigned long flags;
1099
Alan Cox0ad9e7d2008-07-16 21:56:10 +01001100 if (!info->port.xmit_buf)
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07001101 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001102
1103 while (1) {
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07001104 c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
1105 SERIAL_XMIT_SIZE - info->xmit_head));
Linus Torvalds1da177e2005-04-16 15:20:36 -07001106 if (c <= 0)
1107 break;
1108
Alan Cox0ad9e7d2008-07-16 21:56:10 +01001109 memcpy(info->port.xmit_buf + info->xmit_head, buf, c);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001110 spin_lock_irqsave(&info->slock, flags);
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07001111 info->xmit_head = (info->xmit_head + c) &
1112 (SERIAL_XMIT_SIZE - 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001113 info->xmit_cnt += c;
1114 spin_unlock_irqrestore(&info->slock, flags);
1115
1116 buf += c;
1117 count -= c;
1118 total += c;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001119 }
1120
Jiri Slaby1c456072008-02-07 00:16:46 -08001121 if (info->xmit_cnt && !tty->stopped) {
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07001122 if (!tty->hw_stopped ||
1123 (info->type == PORT_16550A) ||
Jiri Slaby1c456072008-02-07 00:16:46 -08001124 (info->board->chip_flag)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001125 spin_lock_irqsave(&info->slock, flags);
Jiri Slaby1c456072008-02-07 00:16:46 -08001126 outb(info->IER & ~UART_IER_THRI, info->ioaddr +
1127 UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001128 info->IER |= UART_IER_THRI;
Jiri Slaby1c456072008-02-07 00:16:46 -08001129 outb(info->IER, info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001130 spin_unlock_irqrestore(&info->slock, flags);
1131 }
1132 }
1133 return total;
1134}
1135
Alan Cox0be2ead2008-04-30 00:54:03 -07001136static int mxser_put_char(struct tty_struct *tty, unsigned char ch)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001137{
Jiri Slaby1c456072008-02-07 00:16:46 -08001138 struct mxser_port *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001139 unsigned long flags;
1140
Alan Cox0ad9e7d2008-07-16 21:56:10 +01001141 if (!info->port.xmit_buf)
Alan Cox0be2ead2008-04-30 00:54:03 -07001142 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001143
1144 if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1)
Alan Cox0be2ead2008-04-30 00:54:03 -07001145 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001146
1147 spin_lock_irqsave(&info->slock, flags);
Alan Cox0ad9e7d2008-07-16 21:56:10 +01001148 info->port.xmit_buf[info->xmit_head++] = ch;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001149 info->xmit_head &= SERIAL_XMIT_SIZE - 1;
1150 info->xmit_cnt++;
1151 spin_unlock_irqrestore(&info->slock, flags);
Jiri Slaby1c456072008-02-07 00:16:46 -08001152 if (!tty->stopped) {
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07001153 if (!tty->hw_stopped ||
1154 (info->type == PORT_16550A) ||
Jiri Slaby1c456072008-02-07 00:16:46 -08001155 info->board->chip_flag) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001156 spin_lock_irqsave(&info->slock, flags);
Jiri Slaby1c456072008-02-07 00:16:46 -08001157 outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001158 info->IER |= UART_IER_THRI;
Jiri Slaby1c456072008-02-07 00:16:46 -08001159 outb(info->IER, info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001160 spin_unlock_irqrestore(&info->slock, flags);
1161 }
1162 }
Alan Cox0be2ead2008-04-30 00:54:03 -07001163 return 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001164}
1165
1166
1167static void mxser_flush_chars(struct tty_struct *tty)
1168{
Jiri Slaby1c456072008-02-07 00:16:46 -08001169 struct mxser_port *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001170 unsigned long flags;
1171
Jiri Slabyace7dd92008-07-25 01:48:22 -07001172 if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf ||
1173 (tty->hw_stopped && info->type != PORT_16550A &&
1174 !info->board->chip_flag))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001175 return;
1176
1177 spin_lock_irqsave(&info->slock, flags);
1178
Jiri Slaby1c456072008-02-07 00:16:46 -08001179 outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001180 info->IER |= UART_IER_THRI;
Jiri Slaby1c456072008-02-07 00:16:46 -08001181 outb(info->IER, info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001182
1183 spin_unlock_irqrestore(&info->slock, flags);
1184}
1185
1186static int mxser_write_room(struct tty_struct *tty)
1187{
Jiri Slaby1c456072008-02-07 00:16:46 -08001188 struct mxser_port *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001189 int ret;
1190
1191 ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
Jiri Slabyace7dd92008-07-25 01:48:22 -07001192 return ret < 0 ? 0 : ret;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001193}
1194
1195static int mxser_chars_in_buffer(struct tty_struct *tty)
1196{
Jiri Slaby1c456072008-02-07 00:16:46 -08001197 struct mxser_port *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001198 return info->xmit_cnt;
1199}
1200
Jiri Slaby1c456072008-02-07 00:16:46 -08001201/*
1202 * ------------------------------------------------------------
1203 * friends of mxser_ioctl()
1204 * ------------------------------------------------------------
1205 */
Alan Cox216ba022008-10-13 10:40:19 +01001206static int mxser_get_serial_info(struct tty_struct *tty,
Jiri Slaby1c456072008-02-07 00:16:46 -08001207 struct serial_struct __user *retinfo)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001208{
Alan Cox216ba022008-10-13 10:40:19 +01001209 struct mxser_port *info = tty->driver_data;
Jiri Slaby1c456072008-02-07 00:16:46 -08001210 struct serial_struct tmp = {
1211 .type = info->type,
Alan Cox216ba022008-10-13 10:40:19 +01001212 .line = tty->index,
Jiri Slaby1c456072008-02-07 00:16:46 -08001213 .port = info->ioaddr,
1214 .irq = info->board->irq,
Alan Cox0ad9e7d2008-07-16 21:56:10 +01001215 .flags = info->port.flags,
Jiri Slaby1c456072008-02-07 00:16:46 -08001216 .baud_base = info->baud_base,
Alan Cox44b7d1b2008-07-16 21:57:18 +01001217 .close_delay = info->port.close_delay,
1218 .closing_wait = info->port.closing_wait,
Jiri Slaby1c456072008-02-07 00:16:46 -08001219 .custom_divisor = info->custom_divisor,
1220 .hub6 = 0
1221 };
1222 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
1223 return -EFAULT;
1224 return 0;
1225}
1226
Alan Cox216ba022008-10-13 10:40:19 +01001227static int mxser_set_serial_info(struct tty_struct *tty,
Jiri Slaby1c456072008-02-07 00:16:46 -08001228 struct serial_struct __user *new_info)
1229{
Alan Cox216ba022008-10-13 10:40:19 +01001230 struct mxser_port *info = tty->driver_data;
Alan Cox07f86c02009-11-30 13:17:41 +00001231 struct tty_port *port = &info->port;
Jiri Slaby1c456072008-02-07 00:16:46 -08001232 struct serial_struct new_serial;
Jiri Slaby80ff8a82008-02-07 00:16:51 -08001233 speed_t baud;
Jiri Slaby1c456072008-02-07 00:16:46 -08001234 unsigned long sl_flags;
1235 unsigned int flags;
1236 int retval = 0;
1237
1238 if (!new_info || !info->ioaddr)
Jiri Slaby80ff8a82008-02-07 00:16:51 -08001239 return -ENODEV;
Jiri Slaby1c456072008-02-07 00:16:46 -08001240 if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
1241 return -EFAULT;
1242
Jiri Slaby80ff8a82008-02-07 00:16:51 -08001243 if (new_serial.irq != info->board->irq ||
1244 new_serial.port != info->ioaddr)
1245 return -EINVAL;
Jiri Slaby1c456072008-02-07 00:16:46 -08001246
Alan Cox07f86c02009-11-30 13:17:41 +00001247 flags = port->flags & ASYNC_SPD_MASK;
Jiri Slaby1c456072008-02-07 00:16:46 -08001248
1249 if (!capable(CAP_SYS_ADMIN)) {
1250 if ((new_serial.baud_base != info->baud_base) ||
Alan Cox44b7d1b2008-07-16 21:57:18 +01001251 (new_serial.close_delay != info->port.close_delay) ||
Alan Cox0ad9e7d2008-07-16 21:56:10 +01001252 ((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK)))
Jiri Slaby1c456072008-02-07 00:16:46 -08001253 return -EPERM;
Alan Cox0ad9e7d2008-07-16 21:56:10 +01001254 info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
Jiri Slaby1c456072008-02-07 00:16:46 -08001255 (new_serial.flags & ASYNC_USR_MASK));
1256 } else {
1257 /*
1258 * OK, past this point, all the error checking has been done.
1259 * At this point, we start making changes.....
1260 */
Alan Cox07f86c02009-11-30 13:17:41 +00001261 port->flags = ((port->flags & ~ASYNC_FLAGS) |
Jiri Slaby1c456072008-02-07 00:16:46 -08001262 (new_serial.flags & ASYNC_FLAGS));
Alan Cox07f86c02009-11-30 13:17:41 +00001263 port->close_delay = new_serial.close_delay * HZ / 100;
1264 port->closing_wait = new_serial.closing_wait * HZ / 100;
1265 tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
1266 if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST &&
Jiri Slaby80ff8a82008-02-07 00:16:51 -08001267 (new_serial.baud_base != info->baud_base ||
1268 new_serial.custom_divisor !=
1269 info->custom_divisor)) {
Alan Cox07f86c02009-11-30 13:17:41 +00001270 if (new_serial.custom_divisor == 0)
1271 return -EINVAL;
Jiri Slaby80ff8a82008-02-07 00:16:51 -08001272 baud = new_serial.baud_base / new_serial.custom_divisor;
Alan Cox216ba022008-10-13 10:40:19 +01001273 tty_encode_baud_rate(tty, baud, baud);
Jiri Slaby80ff8a82008-02-07 00:16:51 -08001274 }
Jiri Slaby1c456072008-02-07 00:16:46 -08001275 }
1276
1277 info->type = new_serial.type;
1278
1279 process_txrx_fifo(info);
1280
Alan Cox07f86c02009-11-30 13:17:41 +00001281 if (test_bit(ASYNCB_INITIALIZED, &port->flags)) {
1282 if (flags != (port->flags & ASYNC_SPD_MASK)) {
Jiri Slaby1c456072008-02-07 00:16:46 -08001283 spin_lock_irqsave(&info->slock, sl_flags);
Alan Cox216ba022008-10-13 10:40:19 +01001284 mxser_change_speed(tty, NULL);
Jiri Slaby1c456072008-02-07 00:16:46 -08001285 spin_unlock_irqrestore(&info->slock, sl_flags);
1286 }
Alan Cox67691402009-11-30 13:17:35 +00001287 } else {
Alan Cox07f86c02009-11-30 13:17:41 +00001288 retval = mxser_activate(port, tty);
Alan Cox67691402009-11-30 13:17:35 +00001289 if (retval == 0)
Alan Cox07f86c02009-11-30 13:17:41 +00001290 set_bit(ASYNCB_INITIALIZED, &port->flags);
Alan Cox67691402009-11-30 13:17:35 +00001291 }
Jiri Slaby1c456072008-02-07 00:16:46 -08001292 return retval;
1293}
1294
1295/*
1296 * mxser_get_lsr_info - get line status register info
1297 *
1298 * Purpose: Let user call ioctl() to get info when the UART physically
1299 * is emptied. On bus types like RS485, the transmitter must
1300 * release the bus after transmitting. This must be done when
1301 * the transmit shift register is empty, not be done when the
1302 * transmit holding register is empty. This functionality
1303 * allows an RS485 driver to be written in user space.
1304 */
1305static int mxser_get_lsr_info(struct mxser_port *info,
1306 unsigned int __user *value)
1307{
1308 unsigned char status;
1309 unsigned int result;
1310 unsigned long flags;
1311
1312 spin_lock_irqsave(&info->slock, flags);
1313 status = inb(info->ioaddr + UART_LSR);
1314 spin_unlock_irqrestore(&info->slock, flags);
1315 result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
1316 return put_user(result, value);
1317}
1318
Jiri Slaby1c456072008-02-07 00:16:46 -08001319static int mxser_tiocmget(struct tty_struct *tty, struct file *file)
1320{
1321 struct mxser_port *info = tty->driver_data;
1322 unsigned char control, status;
1323 unsigned long flags;
1324
1325
1326 if (tty->index == MXSER_PORTS)
1327 return -ENOIOCTLCMD;
1328 if (test_bit(TTY_IO_ERROR, &tty->flags))
1329 return -EIO;
1330
1331 control = info->MCR;
1332
1333 spin_lock_irqsave(&info->slock, flags);
1334 status = inb(info->ioaddr + UART_MSR);
1335 if (status & UART_MSR_ANY_DELTA)
Alan Cox216ba022008-10-13 10:40:19 +01001336 mxser_check_modem_status(tty, info, status);
Jiri Slaby1c456072008-02-07 00:16:46 -08001337 spin_unlock_irqrestore(&info->slock, flags);
1338 return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) |
1339 ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) |
1340 ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) |
1341 ((status & UART_MSR_RI) ? TIOCM_RNG : 0) |
1342 ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) |
1343 ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
1344}
1345
1346static int mxser_tiocmset(struct tty_struct *tty, struct file *file,
1347 unsigned int set, unsigned int clear)
1348{
1349 struct mxser_port *info = tty->driver_data;
1350 unsigned long flags;
1351
1352
1353 if (tty->index == MXSER_PORTS)
1354 return -ENOIOCTLCMD;
1355 if (test_bit(TTY_IO_ERROR, &tty->flags))
1356 return -EIO;
1357
1358 spin_lock_irqsave(&info->slock, flags);
1359
1360 if (set & TIOCM_RTS)
1361 info->MCR |= UART_MCR_RTS;
1362 if (set & TIOCM_DTR)
1363 info->MCR |= UART_MCR_DTR;
1364
1365 if (clear & TIOCM_RTS)
1366 info->MCR &= ~UART_MCR_RTS;
1367 if (clear & TIOCM_DTR)
1368 info->MCR &= ~UART_MCR_DTR;
1369
1370 outb(info->MCR, info->ioaddr + UART_MCR);
1371 spin_unlock_irqrestore(&info->slock, flags);
1372 return 0;
1373}
1374
1375static int __init mxser_program_mode(int port)
1376{
1377 int id, i, j, n;
1378
1379 outb(0, port);
1380 outb(0, port);
1381 outb(0, port);
1382 (void)inb(port);
1383 (void)inb(port);
1384 outb(0, port);
1385 (void)inb(port);
1386
1387 id = inb(port + 1) & 0x1F;
1388 if ((id != C168_ASIC_ID) &&
1389 (id != C104_ASIC_ID) &&
1390 (id != C102_ASIC_ID) &&
1391 (id != CI132_ASIC_ID) &&
1392 (id != CI134_ASIC_ID) &&
1393 (id != CI104J_ASIC_ID))
1394 return -1;
1395 for (i = 0, j = 0; i < 4; i++) {
1396 n = inb(port + 2);
1397 if (n == 'M') {
1398 j = 1;
1399 } else if ((j == 1) && (n == 1)) {
1400 j = 2;
1401 break;
1402 } else
1403 j = 0;
1404 }
1405 if (j != 2)
1406 id = -2;
1407 return id;
1408}
1409
1410static void __init mxser_normal_mode(int port)
1411{
1412 int i, n;
1413
1414 outb(0xA5, port + 1);
1415 outb(0x80, port + 3);
1416 outb(12, port + 0); /* 9600 bps */
1417 outb(0, port + 1);
1418 outb(0x03, port + 3); /* 8 data bits */
1419 outb(0x13, port + 4); /* loop back mode */
1420 for (i = 0; i < 16; i++) {
1421 n = inb(port + 5);
1422 if ((n & 0x61) == 0x60)
1423 break;
1424 if ((n & 1) == 1)
1425 (void)inb(port);
1426 }
1427 outb(0x00, port + 4);
1428}
1429
1430#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */
1431#define CHIP_DO 0x02 /* Serial Data Output in Eprom */
1432#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */
1433#define CHIP_DI 0x08 /* Serial Data Input in Eprom */
1434#define EN_CCMD 0x000 /* Chip's command register */
1435#define EN0_RSARLO 0x008 /* Remote start address reg 0 */
1436#define EN0_RSARHI 0x009 /* Remote start address reg 1 */
1437#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */
1438#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */
1439#define EN0_DCFG 0x00E /* Data configuration reg WR */
1440#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */
1441#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */
1442#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */
1443static int __init mxser_read_register(int port, unsigned short *regs)
1444{
1445 int i, k, value, id;
1446 unsigned int j;
1447
1448 id = mxser_program_mode(port);
1449 if (id < 0)
1450 return id;
1451 for (i = 0; i < 14; i++) {
1452 k = (i & 0x3F) | 0x180;
1453 for (j = 0x100; j > 0; j >>= 1) {
1454 outb(CHIP_CS, port);
1455 if (k & j) {
1456 outb(CHIP_CS | CHIP_DO, port);
1457 outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */
1458 } else {
1459 outb(CHIP_CS, port);
1460 outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */
1461 }
1462 }
1463 (void)inb(port);
1464 value = 0;
1465 for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) {
1466 outb(CHIP_CS, port);
1467 outb(CHIP_CS | CHIP_SK, port);
1468 if (inb(port) & CHIP_DI)
1469 value |= j;
1470 }
1471 regs[i] = value;
1472 outb(0, port);
1473 }
1474 mxser_normal_mode(port);
1475 return id;
1476}
1477
1478static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
1479{
Alan Cox07f86c02009-11-30 13:17:41 +00001480 struct mxser_port *ip;
1481 struct tty_port *port;
Alan Cox216ba022008-10-13 10:40:19 +01001482 struct tty_struct *tty;
Jiri Slaby1c456072008-02-07 00:16:46 -08001483 int result, status;
1484 unsigned int i, j;
Alan Cox9d6d1622008-04-30 00:53:20 -07001485 int ret = 0;
Jiri Slaby1c456072008-02-07 00:16:46 -08001486
1487 switch (cmd) {
1488 case MOXA_GET_MAJOR:
Jiri Slaby8f3d1372008-07-29 22:33:38 -07001489 if (printk_ratelimit())
1490 printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl "
1491 "%x (GET_MAJOR), fix your userspace\n",
1492 current->comm, cmd);
Jiri Slaby1c456072008-02-07 00:16:46 -08001493 return put_user(ttymajor, (int __user *)argp);
1494
1495 case MOXA_CHKPORTENABLE:
1496 result = 0;
Jiri Slaby1c456072008-02-07 00:16:46 -08001497 for (i = 0; i < MXSER_BOARDS; i++)
1498 for (j = 0; j < MXSER_PORTS_PER_BOARD; j++)
1499 if (mxser_boards[i].ports[j].ioaddr)
1500 result |= (1 << i);
Jiri Slaby1c456072008-02-07 00:16:46 -08001501 return put_user(result, (unsigned long __user *)argp);
1502 case MOXA_GETDATACOUNT:
Alan Cox07f86c02009-11-30 13:17:41 +00001503 /* The receive side is locked by port->slock but it isn't
1504 clear that an exact snapshot is worth copying here */
Jiri Slaby1c456072008-02-07 00:16:46 -08001505 if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log)))
Alan Cox9d6d1622008-04-30 00:53:20 -07001506 ret = -EFAULT;
Alan Cox9d6d1622008-04-30 00:53:20 -07001507 return ret;
Jiri Slaby72800df2008-07-25 01:48:20 -07001508 case MOXA_GETMSTATUS: {
1509 struct mxser_mstatus ms, __user *msu = argp;
Jiri Slaby1c456072008-02-07 00:16:46 -08001510 for (i = 0; i < MXSER_BOARDS; i++)
1511 for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) {
Alan Cox07f86c02009-11-30 13:17:41 +00001512 ip = &mxser_boards[i].ports[j];
1513 port = &ip->port;
Jiri Slaby72800df2008-07-25 01:48:20 -07001514 memset(&ms, 0, sizeof(ms));
Jiri Slaby1c456072008-02-07 00:16:46 -08001515
Alan Cox07f86c02009-11-30 13:17:41 +00001516 mutex_lock(&port->mutex);
1517 if (!ip->ioaddr)
Jiri Slaby72800df2008-07-25 01:48:20 -07001518 goto copy;
Alan Cox216ba022008-10-13 10:40:19 +01001519
Alan Cox07f86c02009-11-30 13:17:41 +00001520 tty = tty_port_tty_get(port);
Jiri Slaby1c456072008-02-07 00:16:46 -08001521
Alan Cox216ba022008-10-13 10:40:19 +01001522 if (!tty || !tty->termios)
Alan Cox07f86c02009-11-30 13:17:41 +00001523 ms.cflag = ip->normal_termios.c_cflag;
Jiri Slaby1c456072008-02-07 00:16:46 -08001524 else
Alan Cox216ba022008-10-13 10:40:19 +01001525 ms.cflag = tty->termios->c_cflag;
1526 tty_kref_put(tty);
Alan Cox07f86c02009-11-30 13:17:41 +00001527 spin_lock_irq(&ip->slock);
1528 status = inb(ip->ioaddr + UART_MSR);
1529 spin_unlock_irq(&ip->slock);
Jiri Slaby72800df2008-07-25 01:48:20 -07001530 if (status & UART_MSR_DCD)
1531 ms.dcd = 1;
1532 if (status & UART_MSR_DSR)
1533 ms.dsr = 1;
1534 if (status & UART_MSR_CTS)
1535 ms.cts = 1;
1536 copy:
Alan Cox07f86c02009-11-30 13:17:41 +00001537 mutex_unlock(&port->mutex);
1538 if (copy_to_user(msu, &ms, sizeof(ms)))
Jiri Slaby72800df2008-07-25 01:48:20 -07001539 return -EFAULT;
Jiri Slaby72800df2008-07-25 01:48:20 -07001540 msu++;
Jiri Slaby1c456072008-02-07 00:16:46 -08001541 }
Jiri Slaby1c456072008-02-07 00:16:46 -08001542 return 0;
Jiri Slaby72800df2008-07-25 01:48:20 -07001543 }
Jiri Slaby1c456072008-02-07 00:16:46 -08001544 case MOXA_ASPP_MON_EXT: {
Jiri Slaby72800df2008-07-25 01:48:20 -07001545 struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */
1546 unsigned int cflag, iflag, p;
1547 u8 opmode;
1548
1549 me = kzalloc(sizeof(*me), GFP_KERNEL);
1550 if (!me)
1551 return -ENOMEM;
Jiri Slaby1c456072008-02-07 00:16:46 -08001552
Jiri Slaby72800df2008-07-25 01:48:20 -07001553 for (i = 0, p = 0; i < MXSER_BOARDS; i++) {
1554 for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) {
1555 if (p >= ARRAY_SIZE(me->rx_cnt)) {
1556 i = MXSER_BOARDS;
1557 break;
1558 }
Alan Cox07f86c02009-11-30 13:17:41 +00001559 ip = &mxser_boards[i].ports[j];
1560 port = &ip->port;
Jiri Slaby1c456072008-02-07 00:16:46 -08001561
Alan Cox07f86c02009-11-30 13:17:41 +00001562 mutex_lock(&port->mutex);
1563 if (!ip->ioaddr) {
1564 mutex_unlock(&port->mutex);
1565 continue;
1566 }
1567
1568 spin_lock_irq(&ip->slock);
1569 status = mxser_get_msr(ip->ioaddr, 0, p);
Jiri Slaby1c456072008-02-07 00:16:46 -08001570
1571 if (status & UART_MSR_TERI)
Alan Cox07f86c02009-11-30 13:17:41 +00001572 ip->icount.rng++;
Jiri Slaby1c456072008-02-07 00:16:46 -08001573 if (status & UART_MSR_DDSR)
Alan Cox07f86c02009-11-30 13:17:41 +00001574 ip->icount.dsr++;
Jiri Slaby1c456072008-02-07 00:16:46 -08001575 if (status & UART_MSR_DDCD)
Alan Cox07f86c02009-11-30 13:17:41 +00001576 ip->icount.dcd++;
Jiri Slaby1c456072008-02-07 00:16:46 -08001577 if (status & UART_MSR_DCTS)
Alan Cox07f86c02009-11-30 13:17:41 +00001578 ip->icount.cts++;
Jiri Slaby1c456072008-02-07 00:16:46 -08001579
Alan Cox07f86c02009-11-30 13:17:41 +00001580 ip->mon_data.modem_status = status;
1581 me->rx_cnt[p] = ip->mon_data.rxcnt;
1582 me->tx_cnt[p] = ip->mon_data.txcnt;
1583 me->up_rxcnt[p] = ip->mon_data.up_rxcnt;
1584 me->up_txcnt[p] = ip->mon_data.up_txcnt;
Jiri Slaby72800df2008-07-25 01:48:20 -07001585 me->modem_status[p] =
Alan Cox07f86c02009-11-30 13:17:41 +00001586 ip->mon_data.modem_status;
1587 spin_unlock_irq(&ip->slock);
1588
1589 tty = tty_port_tty_get(&ip->port);
Jiri Slaby1c456072008-02-07 00:16:46 -08001590
Alan Cox216ba022008-10-13 10:40:19 +01001591 if (!tty || !tty->termios) {
Alan Cox07f86c02009-11-30 13:17:41 +00001592 cflag = ip->normal_termios.c_cflag;
1593 iflag = ip->normal_termios.c_iflag;
1594 me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios);
Jiri Slaby1c456072008-02-07 00:16:46 -08001595 } else {
Alan Cox216ba022008-10-13 10:40:19 +01001596 cflag = tty->termios->c_cflag;
1597 iflag = tty->termios->c_iflag;
1598 me->baudrate[p] = tty_get_baud_rate(tty);
Jiri Slaby1c456072008-02-07 00:16:46 -08001599 }
Alan Cox216ba022008-10-13 10:40:19 +01001600 tty_kref_put(tty);
Jiri Slaby1c456072008-02-07 00:16:46 -08001601
Jiri Slaby72800df2008-07-25 01:48:20 -07001602 me->databits[p] = cflag & CSIZE;
1603 me->stopbits[p] = cflag & CSTOPB;
1604 me->parity[p] = cflag & (PARENB | PARODD |
1605 CMSPAR);
Jiri Slaby1c456072008-02-07 00:16:46 -08001606
1607 if (cflag & CRTSCTS)
Jiri Slaby72800df2008-07-25 01:48:20 -07001608 me->flowctrl[p] |= 0x03;
Jiri Slaby1c456072008-02-07 00:16:46 -08001609
1610 if (iflag & (IXON | IXOFF))
Jiri Slaby72800df2008-07-25 01:48:20 -07001611 me->flowctrl[p] |= 0x0C;
Jiri Slaby1c456072008-02-07 00:16:46 -08001612
Alan Cox07f86c02009-11-30 13:17:41 +00001613 if (ip->type == PORT_16550A)
Jiri Slaby72800df2008-07-25 01:48:20 -07001614 me->fifo[p] = 1;
Jiri Slaby1c456072008-02-07 00:16:46 -08001615
Alan Cox07f86c02009-11-30 13:17:41 +00001616 opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2);
Jiri Slaby1c456072008-02-07 00:16:46 -08001617 opmode &= OP_MODE_MASK;
Jiri Slaby72800df2008-07-25 01:48:20 -07001618 me->iftype[p] = opmode;
Alan Cox07f86c02009-11-30 13:17:41 +00001619 mutex_unlock(&port->mutex);
Jiri Slaby1c456072008-02-07 00:16:46 -08001620 }
Alan Cox9d6d1622008-04-30 00:53:20 -07001621 }
Jiri Slaby72800df2008-07-25 01:48:20 -07001622 if (copy_to_user(argp, me, sizeof(*me)))
1623 ret = -EFAULT;
1624 kfree(me);
1625 return ret;
Alan Cox9d6d1622008-04-30 00:53:20 -07001626 }
1627 default:
Jiri Slaby1c456072008-02-07 00:16:46 -08001628 return -ENOIOCTLCMD;
1629 }
1630 return 0;
1631}
1632
1633static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg,
1634 struct async_icount *cprev)
1635{
1636 struct async_icount cnow;
1637 unsigned long flags;
1638 int ret;
1639
1640 spin_lock_irqsave(&info->slock, flags);
1641 cnow = info->icount; /* atomic copy */
1642 spin_unlock_irqrestore(&info->slock, flags);
1643
1644 ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) ||
1645 ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) ||
1646 ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) ||
1647 ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts));
1648
1649 *cprev = cnow;
1650
1651 return ret;
1652}
1653
1654static int mxser_ioctl(struct tty_struct *tty, struct file *file,
1655 unsigned int cmd, unsigned long arg)
1656{
1657 struct mxser_port *info = tty->driver_data;
Alan Cox07f86c02009-11-30 13:17:41 +00001658 struct tty_port *port = &info->port;
Jiri Slaby1c456072008-02-07 00:16:46 -08001659 struct async_icount cnow;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001660 unsigned long flags;
1661 void __user *argp = (void __user *)arg;
Jiri Slaby1c456072008-02-07 00:16:46 -08001662 int retval;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001663
1664 if (tty->index == MXSER_PORTS)
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07001665 return mxser_ioctl_special(cmd, argp);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001666
Linus Torvalds1da177e2005-04-16 15:20:36 -07001667 if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) {
Jiri Slaby1c456072008-02-07 00:16:46 -08001668 int p;
1669 unsigned long opmode;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001670 static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f };
1671 int shiftbit;
1672 unsigned char val, mask;
1673
Jiri Slaby1c456072008-02-07 00:16:46 -08001674 p = tty->index % 4;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001675 if (cmd == MOXA_SET_OP_MODE) {
1676 if (get_user(opmode, (int __user *) argp))
1677 return -EFAULT;
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07001678 if (opmode != RS232_MODE &&
1679 opmode != RS485_2WIRE_MODE &&
1680 opmode != RS422_MODE &&
1681 opmode != RS485_4WIRE_MODE)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001682 return -EFAULT;
1683 mask = ModeMask[p];
1684 shiftbit = p * 2;
Alan Cox07f86c02009-11-30 13:17:41 +00001685 spin_lock_irq(&info->slock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001686 val = inb(info->opmode_ioaddr);
1687 val &= mask;
1688 val |= (opmode << shiftbit);
1689 outb(val, info->opmode_ioaddr);
Alan Cox07f86c02009-11-30 13:17:41 +00001690 spin_unlock_irq(&info->slock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001691 } else {
1692 shiftbit = p * 2;
Alan Cox07f86c02009-11-30 13:17:41 +00001693 spin_lock_irq(&info->slock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001694 opmode = inb(info->opmode_ioaddr) >> shiftbit;
Alan Cox07f86c02009-11-30 13:17:41 +00001695 spin_unlock_irq(&info->slock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001696 opmode &= OP_MODE_MASK;
Jiri Slaby1c456072008-02-07 00:16:46 -08001697 if (put_user(opmode, (int __user *)argp))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001698 return -EFAULT;
1699 }
1700 return 0;
1701 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001702
Jiri Slaby1c456072008-02-07 00:16:46 -08001703 if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && cmd != TIOCGICOUNT &&
1704 test_bit(TTY_IO_ERROR, &tty->flags))
1705 return -EIO;
1706
Linus Torvalds1da177e2005-04-16 15:20:36 -07001707 switch (cmd) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001708 case TIOCGSERIAL:
Alan Cox07f86c02009-11-30 13:17:41 +00001709 mutex_lock(&port->mutex);
Alan Cox216ba022008-10-13 10:40:19 +01001710 retval = mxser_get_serial_info(tty, argp);
Alan Cox07f86c02009-11-30 13:17:41 +00001711 mutex_unlock(&port->mutex);
Alan Cox9d6d1622008-04-30 00:53:20 -07001712 return retval;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001713 case TIOCSSERIAL:
Alan Cox07f86c02009-11-30 13:17:41 +00001714 mutex_lock(&port->mutex);
Alan Cox216ba022008-10-13 10:40:19 +01001715 retval = mxser_set_serial_info(tty, argp);
Alan Cox07f86c02009-11-30 13:17:41 +00001716 mutex_unlock(&port->mutex);
Alan Cox9d6d1622008-04-30 00:53:20 -07001717 return retval;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001718 case TIOCSERGETLSR: /* Get line status register */
Alan Cox9d6d1622008-04-30 00:53:20 -07001719 return mxser_get_lsr_info(info, argp);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001720 /*
1721 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
1722 * - mask passed in arg for lines of interest
1723 * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
1724 * Caller should use TIOCGICOUNT to see which one it was
1725 */
Jiri Slabyfc838152007-04-23 14:41:04 -07001726 case TIOCMIWAIT:
1727 spin_lock_irqsave(&info->slock, flags);
1728 cnow = info->icount; /* note the counters on entry */
1729 spin_unlock_irqrestore(&info->slock, flags);
1730
Alan Coxbdc04e32009-09-19 13:13:31 -07001731 return wait_event_interruptible(info->port.delta_msr_wait,
Jiri Slaby1c456072008-02-07 00:16:46 -08001732 mxser_cflags_changed(info, arg, &cnow));
1733 /*
1734 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1735 * Return: write counters to the user passed counter struct
1736 * NB: both 1->0 and 0->1 transitions are counted except for
1737 * RI where only 0->1 is counted.
1738 */
Jiri Slaby41aee9a2008-07-25 01:48:19 -07001739 case TIOCGICOUNT: {
1740 struct serial_icounter_struct icnt = { 0 };
Linus Torvalds1da177e2005-04-16 15:20:36 -07001741 spin_lock_irqsave(&info->slock, flags);
1742 cnow = info->icount;
1743 spin_unlock_irqrestore(&info->slock, flags);
Jiri Slaby41aee9a2008-07-25 01:48:19 -07001744
1745 icnt.frame = cnow.frame;
1746 icnt.brk = cnow.brk;
1747 icnt.overrun = cnow.overrun;
1748 icnt.buf_overrun = cnow.buf_overrun;
1749 icnt.parity = cnow.parity;
1750 icnt.rx = cnow.rx;
1751 icnt.tx = cnow.tx;
1752 icnt.cts = cnow.cts;
1753 icnt.dsr = cnow.dsr;
1754 icnt.rng = cnow.rng;
1755 icnt.dcd = cnow.dcd;
1756
1757 return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0;
1758 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001759 case MOXA_HighSpeedOn:
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07001760 return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp);
Jiri Slaby1c456072008-02-07 00:16:46 -08001761 case MOXA_SDS_RSTICOUNTER:
Alan Cox07f86c02009-11-30 13:17:41 +00001762 spin_lock_irq(&info->slock);
Jiri Slaby1c456072008-02-07 00:16:46 -08001763 info->mon_data.rxcnt = 0;
1764 info->mon_data.txcnt = 0;
Alan Cox07f86c02009-11-30 13:17:41 +00001765 spin_unlock_irq(&info->slock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001766 return 0;
1767
1768 case MOXA_ASPP_OQUEUE:{
Jiri Slaby1c456072008-02-07 00:16:46 -08001769 int len, lsr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001770
Jiri Slaby1c456072008-02-07 00:16:46 -08001771 len = mxser_chars_in_buffer(tty);
Alan Cox07f86c02009-11-30 13:17:41 +00001772 spin_lock(&info->slock);
Jiri Slabya75b7b62009-09-10 12:20:08 +02001773 lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE;
Alan Cox07f86c02009-11-30 13:17:41 +00001774 spin_unlock_irq(&info->slock);
Jiri Slaby1c456072008-02-07 00:16:46 -08001775 len += (lsr ? 0 : 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001776
Jiri Slaby1c456072008-02-07 00:16:46 -08001777 return put_user(len, (int __user *)argp);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001778 }
Jiri Slaby1c456072008-02-07 00:16:46 -08001779 case MOXA_ASPP_MON: {
1780 int mcr, status;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001781
Alan Cox07f86c02009-11-30 13:17:41 +00001782 spin_lock(&info->slock);
Jiri Slaby1c456072008-02-07 00:16:46 -08001783 status = mxser_get_msr(info->ioaddr, 1, tty->index);
Alan Cox216ba022008-10-13 10:40:19 +01001784 mxser_check_modem_status(tty, info, status);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001785
Jiri Slaby1c456072008-02-07 00:16:46 -08001786 mcr = inb(info->ioaddr + UART_MCR);
Alan Cox07f86c02009-11-30 13:17:41 +00001787 spin_unlock(&info->slock);
1788
Jiri Slaby1c456072008-02-07 00:16:46 -08001789 if (mcr & MOXA_MUST_MCR_XON_FLAG)
1790 info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
1791 else
1792 info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001793
Jiri Slaby1c456072008-02-07 00:16:46 -08001794 if (mcr & MOXA_MUST_MCR_TX_XON)
1795 info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT;
1796 else
1797 info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT;
1798
Alan Cox216ba022008-10-13 10:40:19 +01001799 if (tty->hw_stopped)
Jiri Slaby1c456072008-02-07 00:16:46 -08001800 info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD;
1801 else
1802 info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD;
Alan Cox07f86c02009-11-30 13:17:41 +00001803
Jiri Slaby1c456072008-02-07 00:16:46 -08001804 if (copy_to_user(argp, &info->mon_data,
1805 sizeof(struct mxser_mon)))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001806 return -EFAULT;
Jiri Slaby1c456072008-02-07 00:16:46 -08001807
Linus Torvalds1da177e2005-04-16 15:20:36 -07001808 return 0;
Jiri Slaby1c456072008-02-07 00:16:46 -08001809 }
1810 case MOXA_ASPP_LSTATUS: {
1811 if (put_user(info->err_shadow, (unsigned char __user *)argp))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001812 return -EFAULT;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001813
Jiri Slaby1c456072008-02-07 00:16:46 -08001814 info->err_shadow = 0;
1815 return 0;
1816 }
1817 case MOXA_SET_BAUD_METHOD: {
1818 int method;
1819
1820 if (get_user(method, (int __user *)argp))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001821 return -EFAULT;
Jiri Slaby1c456072008-02-07 00:16:46 -08001822 mxser_set_baud_method[tty->index] = method;
1823 return put_user(method, (int __user *)argp);
1824 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001825 default:
1826 return -ENOIOCTLCMD;
1827 }
1828 return 0;
1829}
1830
Linus Torvalds1da177e2005-04-16 15:20:36 -07001831static void mxser_stoprx(struct tty_struct *tty)
1832{
Jiri Slaby1c456072008-02-07 00:16:46 -08001833 struct mxser_port *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001834
1835 info->ldisc_stop_rx = 1;
1836 if (I_IXOFF(tty)) {
Jiri Slaby1c456072008-02-07 00:16:46 -08001837 if (info->board->chip_flag) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001838 info->IER &= ~MOXA_MUST_RECV_ISR;
Jiri Slaby1c456072008-02-07 00:16:46 -08001839 outb(info->IER, info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001840 } else {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001841 info->x_char = STOP_CHAR(tty);
Jiri Slaby1c456072008-02-07 00:16:46 -08001842 outb(0, info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001843 info->IER |= UART_IER_THRI;
Jiri Slaby1c456072008-02-07 00:16:46 -08001844 outb(info->IER, info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001845 }
1846 }
1847
Alan Cox216ba022008-10-13 10:40:19 +01001848 if (tty->termios->c_cflag & CRTSCTS) {
Jiri Slaby1c456072008-02-07 00:16:46 -08001849 info->MCR &= ~UART_MCR_RTS;
1850 outb(info->MCR, info->ioaddr + UART_MCR);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001851 }
1852}
1853
1854/*
1855 * This routine is called by the upper-layer tty layer to signal that
1856 * incoming characters should be throttled.
1857 */
1858static void mxser_throttle(struct tty_struct *tty)
1859{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001860 mxser_stoprx(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001861}
1862
1863static void mxser_unthrottle(struct tty_struct *tty)
1864{
Jiri Slaby1c456072008-02-07 00:16:46 -08001865 struct mxser_port *info = tty->driver_data;
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07001866
Jiri Slaby1c456072008-02-07 00:16:46 -08001867 /* startrx */
1868 info->ldisc_stop_rx = 0;
1869 if (I_IXOFF(tty)) {
1870 if (info->x_char)
1871 info->x_char = 0;
1872 else {
1873 if (info->board->chip_flag) {
1874 info->IER |= MOXA_MUST_RECV_ISR;
1875 outb(info->IER, info->ioaddr + UART_IER);
1876 } else {
1877 info->x_char = START_CHAR(tty);
1878 outb(0, info->ioaddr + UART_IER);
1879 info->IER |= UART_IER_THRI;
1880 outb(info->IER, info->ioaddr + UART_IER);
1881 }
1882 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001883 }
1884
Alan Cox216ba022008-10-13 10:40:19 +01001885 if (tty->termios->c_cflag & CRTSCTS) {
Jiri Slaby1c456072008-02-07 00:16:46 -08001886 info->MCR |= UART_MCR_RTS;
1887 outb(info->MCR, info->ioaddr + UART_MCR);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001888 }
1889}
1890
1891/*
1892 * mxser_stop() and mxser_start()
1893 *
1894 * This routines are called before setting or resetting tty->stopped.
1895 * They enable or disable transmitter interrupts, as necessary.
1896 */
1897static void mxser_stop(struct tty_struct *tty)
1898{
Jiri Slaby1c456072008-02-07 00:16:46 -08001899 struct mxser_port *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001900 unsigned long flags;
1901
1902 spin_lock_irqsave(&info->slock, flags);
1903 if (info->IER & UART_IER_THRI) {
1904 info->IER &= ~UART_IER_THRI;
Jiri Slaby1c456072008-02-07 00:16:46 -08001905 outb(info->IER, info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001906 }
1907 spin_unlock_irqrestore(&info->slock, flags);
1908}
1909
1910static void mxser_start(struct tty_struct *tty)
1911{
Jiri Slaby1c456072008-02-07 00:16:46 -08001912 struct mxser_port *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001913 unsigned long flags;
1914
1915 spin_lock_irqsave(&info->slock, flags);
Alan Cox0ad9e7d2008-07-16 21:56:10 +01001916 if (info->xmit_cnt && info->port.xmit_buf) {
Jiri Slaby1c456072008-02-07 00:16:46 -08001917 outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001918 info->IER |= UART_IER_THRI;
Jiri Slaby1c456072008-02-07 00:16:46 -08001919 outb(info->IER, info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001920 }
1921 spin_unlock_irqrestore(&info->slock, flags);
1922}
1923
Jiri Slaby1c456072008-02-07 00:16:46 -08001924static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
1925{
1926 struct mxser_port *info = tty->driver_data;
1927 unsigned long flags;
1928
1929 spin_lock_irqsave(&info->slock, flags);
Alan Cox216ba022008-10-13 10:40:19 +01001930 mxser_change_speed(tty, old_termios);
Jiri Slaby1c456072008-02-07 00:16:46 -08001931 spin_unlock_irqrestore(&info->slock, flags);
1932
1933 if ((old_termios->c_cflag & CRTSCTS) &&
1934 !(tty->termios->c_cflag & CRTSCTS)) {
1935 tty->hw_stopped = 0;
1936 mxser_start(tty);
1937 }
1938
1939 /* Handle sw stopped */
1940 if ((old_termios->c_iflag & IXON) &&
1941 !(tty->termios->c_iflag & IXON)) {
1942 tty->stopped = 0;
1943
1944 if (info->board->chip_flag) {
1945 spin_lock_irqsave(&info->slock, flags);
Christoph Hellwig148ff862008-04-30 00:54:29 -07001946 mxser_disable_must_rx_software_flow_control(
1947 info->ioaddr);
Jiri Slaby1c456072008-02-07 00:16:46 -08001948 spin_unlock_irqrestore(&info->slock, flags);
1949 }
1950
1951 mxser_start(tty);
1952 }
1953}
1954
Linus Torvalds1da177e2005-04-16 15:20:36 -07001955/*
1956 * mxser_wait_until_sent() --- wait until the transmitter is empty
1957 */
1958static void mxser_wait_until_sent(struct tty_struct *tty, int timeout)
1959{
Jiri Slaby1c456072008-02-07 00:16:46 -08001960 struct mxser_port *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001961 unsigned long orig_jiffies, char_time;
Alan Cox07f86c02009-11-30 13:17:41 +00001962 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001963 int lsr;
1964
1965 if (info->type == PORT_UNKNOWN)
1966 return;
1967
1968 if (info->xmit_fifo_size == 0)
1969 return; /* Just in case.... */
1970
1971 orig_jiffies = jiffies;
1972 /*
1973 * Set the check interval to be 1/5 of the estimated time to
1974 * send a single character, and make it at least 1. The check
1975 * interval should also be less than the timeout.
1976 *
1977 * Note: we have to use pretty tight timings here to satisfy
1978 * the NIST-PCTS.
1979 */
1980 char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size;
1981 char_time = char_time / 5;
1982 if (char_time == 0)
1983 char_time = 1;
1984 if (timeout && timeout < char_time)
1985 char_time = timeout;
1986 /*
1987 * If the transmitter hasn't cleared in twice the approximate
1988 * amount of time to send the entire FIFO, it probably won't
1989 * ever clear. This assumes the UART isn't doing flow
1990 * control, which is currently the case. Hence, if it ever
1991 * takes longer than info->timeout, this is probably due to a
1992 * UART bug of some kind. So, we clamp the timeout parameter at
1993 * 2*info->timeout.
1994 */
1995 if (!timeout || timeout > 2 * info->timeout)
1996 timeout = 2 * info->timeout;
1997#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07001998 printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...",
1999 timeout, char_time);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002000 printk("jiff=%lu...", jiffies);
2001#endif
Alan Cox07f86c02009-11-30 13:17:41 +00002002 spin_lock_irqsave(&info->slock, flags);
Jiri Slaby1c456072008-02-07 00:16:46 -08002003 while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002004#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
2005 printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
2006#endif
Alan Cox07f86c02009-11-30 13:17:41 +00002007 spin_unlock_irqrestore(&info->slock, flags);
Nishanth Aravamudanda4cd8d2005-09-10 00:27:30 -07002008 schedule_timeout_interruptible(char_time);
Alan Cox07f86c02009-11-30 13:17:41 +00002009 spin_lock_irqsave(&info->slock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002010 if (signal_pending(current))
2011 break;
2012 if (timeout && time_after(jiffies, orig_jiffies + timeout))
2013 break;
2014 }
Alan Cox07f86c02009-11-30 13:17:41 +00002015 spin_unlock_irqrestore(&info->slock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002016 set_current_state(TASK_RUNNING);
2017
2018#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
2019 printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
2020#endif
2021}
2022
Linus Torvalds1da177e2005-04-16 15:20:36 -07002023/*
2024 * This routine is called by tty_hangup() when a hangup is signaled.
2025 */
Jiri Slaby1c456072008-02-07 00:16:46 -08002026static void mxser_hangup(struct tty_struct *tty)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002027{
Jiri Slaby1c456072008-02-07 00:16:46 -08002028 struct mxser_port *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002029
2030 mxser_flush_buffer(tty);
Alan Cox3b6826b2009-01-02 13:45:58 +00002031 tty_port_hangup(&info->port);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002032}
2033
Linus Torvalds1da177e2005-04-16 15:20:36 -07002034/*
2035 * mxser_rs_break() --- routine which turns the break handling on or off
2036 */
Alan Cox9e989662008-07-22 11:18:03 +01002037static int mxser_rs_break(struct tty_struct *tty, int break_state)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002038{
Jiri Slaby1c456072008-02-07 00:16:46 -08002039 struct mxser_port *info = tty->driver_data;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002040 unsigned long flags;
2041
2042 spin_lock_irqsave(&info->slock, flags);
2043 if (break_state == -1)
Jiri Slaby1c456072008-02-07 00:16:46 -08002044 outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC,
2045 info->ioaddr + UART_LCR);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002046 else
Jiri Slaby1c456072008-02-07 00:16:46 -08002047 outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC,
2048 info->ioaddr + UART_LCR);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002049 spin_unlock_irqrestore(&info->slock, flags);
Alan Cox9e989662008-07-22 11:18:03 +01002050 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002051}
2052
Alan Cox216ba022008-10-13 10:40:19 +01002053static void mxser_receive_chars(struct tty_struct *tty,
2054 struct mxser_port *port, int *status)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002055{
Linus Torvalds1da177e2005-04-16 15:20:36 -07002056 unsigned char ch, gdl;
2057 int ignored = 0;
2058 int cnt = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002059 int recv_room;
2060 int max = 256;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002061
Alan Cox33f0f882006-01-09 20:54:13 -08002062 recv_room = tty->receive_room;
Alan Cox216ba022008-10-13 10:40:19 +01002063 if (recv_room == 0 && !port->ldisc_stop_rx)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002064 mxser_stoprx(tty);
Jiri Slaby1c456072008-02-07 00:16:46 -08002065 if (port->board->chip_flag != MOXA_OTHER_UART) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002066
Jiri Slaby1c456072008-02-07 00:16:46 -08002067 if (*status & UART_LSR_SPECIAL)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002068 goto intr_old;
Jiri Slaby1c456072008-02-07 00:16:46 -08002069 if (port->board->chip_flag == MOXA_MUST_MU860_HWID &&
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07002070 (*status & MOXA_MUST_LSR_RERR))
Linus Torvalds1da177e2005-04-16 15:20:36 -07002071 goto intr_old;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002072 if (*status & MOXA_MUST_LSR_RERR)
2073 goto intr_old;
2074
Jiri Slaby1c456072008-02-07 00:16:46 -08002075 gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002076
Jiri Slaby1c456072008-02-07 00:16:46 -08002077 if (port->board->chip_flag == MOXA_MUST_MU150_HWID)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002078 gdl &= MOXA_MUST_GDL_MASK;
2079 if (gdl >= recv_room) {
Jiri Slaby1c456072008-02-07 00:16:46 -08002080 if (!port->ldisc_stop_rx)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002081 mxser_stoprx(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002082 }
2083 while (gdl--) {
Jiri Slaby1c456072008-02-07 00:16:46 -08002084 ch = inb(port->ioaddr + UART_RX);
Denis Vlasenko3399ba52005-06-06 13:35:55 -07002085 tty_insert_flip_char(tty, ch, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002086 cnt++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002087 }
2088 goto end_intr;
2089 }
Jiri Slaby1c456072008-02-07 00:16:46 -08002090intr_old:
Linus Torvalds1da177e2005-04-16 15:20:36 -07002091
2092 do {
2093 if (max-- < 0)
2094 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002095
Jiri Slaby1c456072008-02-07 00:16:46 -08002096 ch = inb(port->ioaddr + UART_RX);
2097 if (port->board->chip_flag && (*status & UART_LSR_OE))
2098 outb(0x23, port->ioaddr + UART_FCR);
2099 *status &= port->read_status_mask;
2100 if (*status & port->ignore_status_mask) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002101 if (++ignored > 100)
2102 break;
2103 } else {
Denis Vlasenko3399ba52005-06-06 13:35:55 -07002104 char flag = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002105 if (*status & UART_LSR_SPECIAL) {
2106 if (*status & UART_LSR_BI) {
Denis Vlasenko3399ba52005-06-06 13:35:55 -07002107 flag = TTY_BREAK;
Jiri Slaby1c456072008-02-07 00:16:46 -08002108 port->icount.brk++;
2109
Alan Cox0ad9e7d2008-07-16 21:56:10 +01002110 if (port->port.flags & ASYNC_SAK)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002111 do_SAK(tty);
2112 } else if (*status & UART_LSR_PE) {
Denis Vlasenko3399ba52005-06-06 13:35:55 -07002113 flag = TTY_PARITY;
Jiri Slaby1c456072008-02-07 00:16:46 -08002114 port->icount.parity++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002115 } else if (*status & UART_LSR_FE) {
Denis Vlasenko3399ba52005-06-06 13:35:55 -07002116 flag = TTY_FRAME;
Jiri Slaby1c456072008-02-07 00:16:46 -08002117 port->icount.frame++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002118 } else if (*status & UART_LSR_OE) {
Denis Vlasenko3399ba52005-06-06 13:35:55 -07002119 flag = TTY_OVERRUN;
Jiri Slaby1c456072008-02-07 00:16:46 -08002120 port->icount.overrun++;
2121 } else
2122 flag = TTY_BREAK;
Denis Vlasenko3399ba52005-06-06 13:35:55 -07002123 }
2124 tty_insert_flip_char(tty, ch, flag);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002125 cnt++;
2126 if (cnt >= recv_room) {
Jiri Slaby1c456072008-02-07 00:16:46 -08002127 if (!port->ldisc_stop_rx)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002128 mxser_stoprx(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002129 break;
2130 }
2131
2132 }
2133
Jiri Slaby1c456072008-02-07 00:16:46 -08002134 if (port->board->chip_flag)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002135 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002136
Jiri Slaby1c456072008-02-07 00:16:46 -08002137 *status = inb(port->ioaddr + UART_LSR);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002138 } while (*status & UART_LSR_DR);
2139
Jiri Slaby1c456072008-02-07 00:16:46 -08002140end_intr:
Alan Cox216ba022008-10-13 10:40:19 +01002141 mxvar_log.rxcnt[tty->index] += cnt;
Jiri Slaby1c456072008-02-07 00:16:46 -08002142 port->mon_data.rxcnt += cnt;
2143 port->mon_data.up_rxcnt += cnt;
Denis Vlasenko3399ba52005-06-06 13:35:55 -07002144
Jiri Slaby1c456072008-02-07 00:16:46 -08002145 /*
2146 * We are called from an interrupt context with &port->slock
2147 * being held. Drop it temporarily in order to prevent
2148 * recursive locking.
2149 */
2150 spin_unlock(&port->slock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002151 tty_flip_buffer_push(tty);
Jiri Slaby1c456072008-02-07 00:16:46 -08002152 spin_lock(&port->slock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002153}
2154
Alan Cox216ba022008-10-13 10:40:19 +01002155static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002156{
2157 int count, cnt;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002158
Jiri Slaby1c456072008-02-07 00:16:46 -08002159 if (port->x_char) {
2160 outb(port->x_char, port->ioaddr + UART_TX);
2161 port->x_char = 0;
Alan Cox216ba022008-10-13 10:40:19 +01002162 mxvar_log.txcnt[tty->index]++;
Jiri Slaby1c456072008-02-07 00:16:46 -08002163 port->mon_data.txcnt++;
2164 port->mon_data.up_txcnt++;
2165 port->icount.tx++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002166 return;
2167 }
2168
Alan Cox0ad9e7d2008-07-16 21:56:10 +01002169 if (port->port.xmit_buf == NULL)
Jiri Slaby1c456072008-02-07 00:16:46 -08002170 return;
2171
Alan Cox216ba022008-10-13 10:40:19 +01002172 if (port->xmit_cnt <= 0 || tty->stopped ||
2173 (tty->hw_stopped &&
Jiri Slaby1c456072008-02-07 00:16:46 -08002174 (port->type != PORT_16550A) &&
2175 (!port->board->chip_flag))) {
2176 port->IER &= ~UART_IER_THRI;
2177 outb(port->IER, port->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002178 return;
2179 }
2180
Jiri Slaby1c456072008-02-07 00:16:46 -08002181 cnt = port->xmit_cnt;
2182 count = port->xmit_fifo_size;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002183 do {
Alan Cox0ad9e7d2008-07-16 21:56:10 +01002184 outb(port->port.xmit_buf[port->xmit_tail++],
Jiri Slaby1c456072008-02-07 00:16:46 -08002185 port->ioaddr + UART_TX);
2186 port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1);
2187 if (--port->xmit_cnt <= 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002188 break;
2189 } while (--count > 0);
Alan Cox216ba022008-10-13 10:40:19 +01002190 mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002191
Jiri Slaby1c456072008-02-07 00:16:46 -08002192 port->mon_data.txcnt += (cnt - port->xmit_cnt);
2193 port->mon_data.up_txcnt += (cnt - port->xmit_cnt);
2194 port->icount.tx += (cnt - port->xmit_cnt);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002195
Alan Cox216ba022008-10-13 10:40:19 +01002196 if (port->xmit_cnt < WAKEUP_CHARS && tty)
2197 tty_wakeup(tty);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002198
Jiri Slaby1c456072008-02-07 00:16:46 -08002199 if (port->xmit_cnt <= 0) {
2200 port->IER &= ~UART_IER_THRI;
2201 outb(port->IER, port->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002202 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002203}
2204
2205/*
Jiri Slaby1c456072008-02-07 00:16:46 -08002206 * This is the serial driver's generic interrupt routine
Linus Torvalds1da177e2005-04-16 15:20:36 -07002207 */
Jiri Slaby1c456072008-02-07 00:16:46 -08002208static irqreturn_t mxser_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002209{
Jiri Slaby1c456072008-02-07 00:16:46 -08002210 int status, iir, i;
2211 struct mxser_board *brd = NULL;
2212 struct mxser_port *port;
2213 int max, irqbits, bits, msr;
2214 unsigned int int_cnt, pass_counter = 0;
2215 int handled = IRQ_NONE;
Alan Cox216ba022008-10-13 10:40:19 +01002216 struct tty_struct *tty;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002217
Jiri Slaby1c456072008-02-07 00:16:46 -08002218 for (i = 0; i < MXSER_BOARDS; i++)
2219 if (dev_id == &mxser_boards[i]) {
2220 brd = dev_id;
2221 break;
2222 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002223
Jiri Slaby1c456072008-02-07 00:16:46 -08002224 if (i == MXSER_BOARDS)
2225 goto irq_stop;
2226 if (brd == NULL)
2227 goto irq_stop;
2228 max = brd->info->nports;
2229 while (pass_counter++ < MXSER_ISR_PASS_LIMIT) {
2230 irqbits = inb(brd->vector) & brd->vector_mask;
2231 if (irqbits == brd->vector_mask)
2232 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002233
Jiri Slaby1c456072008-02-07 00:16:46 -08002234 handled = IRQ_HANDLED;
2235 for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) {
2236 if (irqbits == brd->vector_mask)
2237 break;
2238 if (bits & irqbits)
2239 continue;
2240 port = &brd->ports[i];
Linus Torvalds1da177e2005-04-16 15:20:36 -07002241
Jiri Slaby1c456072008-02-07 00:16:46 -08002242 int_cnt = 0;
2243 spin_lock(&port->slock);
2244 do {
2245 iir = inb(port->ioaddr + UART_IIR);
2246 if (iir & UART_IIR_NO_INT)
2247 break;
2248 iir &= MOXA_MUST_IIR_MASK;
Alan Cox216ba022008-10-13 10:40:19 +01002249 tty = tty_port_tty_get(&port->port);
2250 if (!tty ||
Alan Cox0ad9e7d2008-07-16 21:56:10 +01002251 (port->port.flags & ASYNC_CLOSING) ||
2252 !(port->port.flags &
Jiri Slaby1c456072008-02-07 00:16:46 -08002253 ASYNC_INITIALIZED)) {
2254 status = inb(port->ioaddr + UART_LSR);
2255 outb(0x27, port->ioaddr + UART_FCR);
2256 inb(port->ioaddr + UART_MSR);
Alan Cox216ba022008-10-13 10:40:19 +01002257 tty_kref_put(tty);
Jiri Slaby1c456072008-02-07 00:16:46 -08002258 break;
2259 }
2260
2261 status = inb(port->ioaddr + UART_LSR);
2262
2263 if (status & UART_LSR_PE)
2264 port->err_shadow |= NPPI_NOTIFY_PARITY;
2265 if (status & UART_LSR_FE)
2266 port->err_shadow |= NPPI_NOTIFY_FRAMING;
2267 if (status & UART_LSR_OE)
2268 port->err_shadow |=
2269 NPPI_NOTIFY_HW_OVERRUN;
2270 if (status & UART_LSR_BI)
2271 port->err_shadow |= NPPI_NOTIFY_BREAK;
2272
2273 if (port->board->chip_flag) {
2274 if (iir == MOXA_MUST_IIR_GDA ||
2275 iir == MOXA_MUST_IIR_RDA ||
2276 iir == MOXA_MUST_IIR_RTO ||
2277 iir == MOXA_MUST_IIR_LSR)
Alan Cox216ba022008-10-13 10:40:19 +01002278 mxser_receive_chars(tty, port,
Jiri Slaby1c456072008-02-07 00:16:46 -08002279 &status);
2280
2281 } else {
2282 status &= port->read_status_mask;
2283 if (status & UART_LSR_DR)
Alan Cox216ba022008-10-13 10:40:19 +01002284 mxser_receive_chars(tty, port,
Jiri Slaby1c456072008-02-07 00:16:46 -08002285 &status);
2286 }
2287 msr = inb(port->ioaddr + UART_MSR);
2288 if (msr & UART_MSR_ANY_DELTA)
Alan Cox216ba022008-10-13 10:40:19 +01002289 mxser_check_modem_status(tty, port, msr);
Jiri Slaby1c456072008-02-07 00:16:46 -08002290
2291 if (port->board->chip_flag) {
2292 if (iir == 0x02 && (status &
2293 UART_LSR_THRE))
Alan Cox216ba022008-10-13 10:40:19 +01002294 mxser_transmit_chars(tty, port);
Jiri Slaby1c456072008-02-07 00:16:46 -08002295 } else {
2296 if (status & UART_LSR_THRE)
Alan Cox216ba022008-10-13 10:40:19 +01002297 mxser_transmit_chars(tty, port);
Jiri Slaby1c456072008-02-07 00:16:46 -08002298 }
Alan Cox216ba022008-10-13 10:40:19 +01002299 tty_kref_put(tty);
Jiri Slaby1c456072008-02-07 00:16:46 -08002300 } while (int_cnt++ < MXSER_ISR_PASS_LIMIT);
2301 spin_unlock(&port->slock);
2302 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002303 }
2304
Jiri Slaby1c456072008-02-07 00:16:46 -08002305irq_stop:
2306 return handled;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002307}
2308
Jiri Slaby1c456072008-02-07 00:16:46 -08002309static const struct tty_operations mxser_ops = {
2310 .open = mxser_open,
2311 .close = mxser_close,
2312 .write = mxser_write,
2313 .put_char = mxser_put_char,
2314 .flush_chars = mxser_flush_chars,
2315 .write_room = mxser_write_room,
2316 .chars_in_buffer = mxser_chars_in_buffer,
2317 .flush_buffer = mxser_flush_buffer,
2318 .ioctl = mxser_ioctl,
2319 .throttle = mxser_throttle,
2320 .unthrottle = mxser_unthrottle,
2321 .set_termios = mxser_set_termios,
2322 .stop = mxser_stop,
2323 .start = mxser_start,
2324 .hangup = mxser_hangup,
2325 .break_ctl = mxser_rs_break,
2326 .wait_until_sent = mxser_wait_until_sent,
2327 .tiocmget = mxser_tiocmget,
2328 .tiocmset = mxser_tiocmset,
2329};
2330
Alan Cox31f35932009-01-02 13:45:05 +00002331struct tty_port_operations mxser_port_ops = {
2332 .carrier_raised = mxser_carrier_raised,
Alan Coxfcc8ac12009-06-11 12:24:17 +01002333 .dtr_rts = mxser_dtr_rts,
Alan Cox67691402009-11-30 13:17:35 +00002334 .activate = mxser_activate,
2335 .shutdown = mxser_shutdown_port,
Alan Cox31f35932009-01-02 13:45:05 +00002336};
2337
Linus Torvalds1da177e2005-04-16 15:20:36 -07002338/*
Jiri Slaby1c456072008-02-07 00:16:46 -08002339 * The MOXA Smartio/Industio serial driver boot-time initialization code!
Linus Torvalds1da177e2005-04-16 15:20:36 -07002340 */
Jiri Slaby1c456072008-02-07 00:16:46 -08002341
2342static void mxser_release_res(struct mxser_board *brd, struct pci_dev *pdev,
2343 unsigned int irq)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002344{
Jiri Slaby1c456072008-02-07 00:16:46 -08002345 if (irq)
2346 free_irq(brd->irq, brd);
2347 if (pdev != NULL) { /* PCI */
2348#ifdef CONFIG_PCI
2349 pci_release_region(pdev, 2);
2350 pci_release_region(pdev, 3);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002351#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07002352 } else {
Jiri Slaby1c456072008-02-07 00:16:46 -08002353 release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
2354 release_region(brd->vector, 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002355 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002356}
2357
Jiri Slaby1c456072008-02-07 00:16:46 -08002358static int __devinit mxser_initbrd(struct mxser_board *brd,
2359 struct pci_dev *pdev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002360{
Jiri Slaby1c456072008-02-07 00:16:46 -08002361 struct mxser_port *info;
2362 unsigned int i;
2363 int retval;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002364
Jiri Slaby83766bc2008-07-25 01:48:21 -07002365 printk(KERN_INFO "mxser: max. baud rate = %d bps\n",
2366 brd->ports[0].max_baud);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002367
Jiri Slaby1c456072008-02-07 00:16:46 -08002368 for (i = 0; i < brd->info->nports; i++) {
2369 info = &brd->ports[i];
Alan Cox44b7d1b2008-07-16 21:57:18 +01002370 tty_port_init(&info->port);
Alan Cox31f35932009-01-02 13:45:05 +00002371 info->port.ops = &mxser_port_ops;
Jiri Slaby1c456072008-02-07 00:16:46 -08002372 info->board = brd;
2373 info->stop_rx = 0;
2374 info->ldisc_stop_rx = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002375
Jiri Slaby1c456072008-02-07 00:16:46 -08002376 /* Enhance mode enabled here */
2377 if (brd->chip_flag != MOXA_OTHER_UART)
Christoph Hellwig148ff862008-04-30 00:54:29 -07002378 mxser_enable_must_enchance_mode(info->ioaddr);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002379
Alan Cox0ad9e7d2008-07-16 21:56:10 +01002380 info->port.flags = ASYNC_SHARE_IRQ;
Jiri Slaby1c456072008-02-07 00:16:46 -08002381 info->type = brd->uart_type;
2382
2383 process_txrx_fifo(info);
2384
2385 info->custom_divisor = info->baud_base * 16;
Alan Cox44b7d1b2008-07-16 21:57:18 +01002386 info->port.close_delay = 5 * HZ / 10;
2387 info->port.closing_wait = 30 * HZ;
Jiri Slaby1c456072008-02-07 00:16:46 -08002388 info->normal_termios = mxvar_sdriver->init_termios;
Jiri Slaby1c456072008-02-07 00:16:46 -08002389 memset(&info->mon_data, 0, sizeof(struct mxser_mon));
2390 info->err_shadow = 0;
2391 spin_lock_init(&info->slock);
2392
2393 /* before set INT ISR, disable all int */
2394 outb(inb(info->ioaddr + UART_IER) & 0xf0,
2395 info->ioaddr + UART_IER);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002396 }
2397
Jiri Slaby1c456072008-02-07 00:16:46 -08002398 retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser",
2399 brd);
2400 if (retval) {
2401 printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may "
2402 "conflict with another device.\n",
2403 brd->info->name, brd->irq);
2404 /* We hold resources, we need to release them. */
2405 mxser_release_res(brd, pdev, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002406 }
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07002407 return retval;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002408}
2409
Jiri Slaby1c456072008-02-07 00:16:46 -08002410static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002411{
2412 int id, i, bits;
2413 unsigned short regs[16], irq;
2414 unsigned char scratch, scratch2;
2415
Jiri Slaby1c456072008-02-07 00:16:46 -08002416 brd->chip_flag = MOXA_OTHER_UART;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002417
2418 id = mxser_read_register(cap, regs);
Jiri Slaby1c456072008-02-07 00:16:46 -08002419 switch (id) {
2420 case C168_ASIC_ID:
2421 brd->info = &mxser_cards[0];
2422 break;
2423 case C104_ASIC_ID:
2424 brd->info = &mxser_cards[1];
2425 break;
2426 case CI104J_ASIC_ID:
2427 brd->info = &mxser_cards[2];
2428 break;
2429 case C102_ASIC_ID:
2430 brd->info = &mxser_cards[5];
2431 break;
2432 case CI132_ASIC_ID:
2433 brd->info = &mxser_cards[6];
2434 break;
2435 case CI134_ASIC_ID:
2436 brd->info = &mxser_cards[7];
2437 break;
2438 default:
Jesper Juhl8ea2c2e2006-06-25 05:47:54 -07002439 return 0;
Jiri Slaby1c456072008-02-07 00:16:46 -08002440 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07002441
2442 irq = 0;
Jiri Slaby1c456072008-02-07 00:16:46 -08002443 /* some ISA cards have 2 ports, but we want to see them as 4-port (why?)
2444 Flag-hack checks if configuration should be read as 2-port here. */
2445 if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002446 irq = regs[9] & 0xF000;
2447 irq = irq | (irq >> 4);
2448 if (irq != (regs[9] & 0xFF00))
Jiri Slaby83766bc2008-07-25 01:48:21 -07002449 goto err_irqconflict;
Jiri Slaby1c456072008-02-07 00:16:46 -08002450 } else if (brd->info->nports == 4) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002451 irq = regs[9] & 0xF000;
2452 irq = irq | (irq >> 4);
2453 irq = irq | (irq >> 8);
2454 if (irq != regs[9])
Jiri Slaby83766bc2008-07-25 01:48:21 -07002455 goto err_irqconflict;
Jiri Slaby1c456072008-02-07 00:16:46 -08002456 } else if (brd->info->nports == 8) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002457 irq = regs[9] & 0xF000;
2458 irq = irq | (irq >> 4);
2459 irq = irq | (irq >> 8);
2460 if ((irq != regs[9]) || (irq != regs[10]))
Jiri Slaby83766bc2008-07-25 01:48:21 -07002461 goto err_irqconflict;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002462 }
2463
Jiri Slaby83766bc2008-07-25 01:48:21 -07002464 if (!irq) {
2465 printk(KERN_ERR "mxser: interrupt number unset\n");
2466 return -EIO;
2467 }
Jiri Slaby1c456072008-02-07 00:16:46 -08002468 brd->irq = ((int)(irq & 0xF000) >> 12);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002469 for (i = 0; i < 8; i++)
Jiri Slaby1c456072008-02-07 00:16:46 -08002470 brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8;
Jiri Slaby83766bc2008-07-25 01:48:21 -07002471 if ((regs[12] & 0x80) == 0) {
2472 printk(KERN_ERR "mxser: invalid interrupt vector\n");
2473 return -EIO;
2474 }
Jiri Slaby1c456072008-02-07 00:16:46 -08002475 brd->vector = (int)regs[11]; /* interrupt vector */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002476 if (id == 1)
Jiri Slaby1c456072008-02-07 00:16:46 -08002477 brd->vector_mask = 0x00FF;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002478 else
Jiri Slaby1c456072008-02-07 00:16:46 -08002479 brd->vector_mask = 0x000F;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002480 for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) {
2481 if (regs[12] & bits) {
Jiri Slaby1c456072008-02-07 00:16:46 -08002482 brd->ports[i].baud_base = 921600;
2483 brd->ports[i].max_baud = 921600;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002484 } else {
Jiri Slaby1c456072008-02-07 00:16:46 -08002485 brd->ports[i].baud_base = 115200;
2486 brd->ports[i].max_baud = 115200;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002487 }
2488 }
2489 scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB);
2490 outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR);
2491 outb(0, cap + UART_EFR); /* EFR is the same as FCR */
2492 outb(scratch2, cap + UART_LCR);
2493 outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR);
2494 scratch = inb(cap + UART_IIR);
2495
2496 if (scratch & 0xC0)
Jiri Slaby1c456072008-02-07 00:16:46 -08002497 brd->uart_type = PORT_16550A;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002498 else
Jiri Slaby1c456072008-02-07 00:16:46 -08002499 brd->uart_type = PORT_16450;
2500 if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports,
Jiri Slaby83766bc2008-07-25 01:48:21 -07002501 "mxser(IO)")) {
2502 printk(KERN_ERR "mxser: can't request ports I/O region: "
2503 "0x%.8lx-0x%.8lx\n",
2504 brd->ports[0].ioaddr, brd->ports[0].ioaddr +
2505 8 * brd->info->nports - 1);
2506 return -EIO;
2507 }
Jiri Slaby1c456072008-02-07 00:16:46 -08002508 if (!request_region(brd->vector, 1, "mxser(vector)")) {
2509 release_region(brd->ports[0].ioaddr, 8 * brd->info->nports);
Jiri Slaby83766bc2008-07-25 01:48:21 -07002510 printk(KERN_ERR "mxser: can't request interrupt vector region: "
2511 "0x%.8lx-0x%.8lx\n",
2512 brd->ports[0].ioaddr, brd->ports[0].ioaddr +
2513 8 * brd->info->nports - 1);
2514 return -EIO;
Jiri Slaby1c456072008-02-07 00:16:46 -08002515 }
2516 return brd->info->nports;
Jiri Slaby83766bc2008-07-25 01:48:21 -07002517
2518err_irqconflict:
2519 printk(KERN_ERR "mxser: invalid interrupt number\n");
2520 return -EIO;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002521}
2522
Jiri Slaby1c456072008-02-07 00:16:46 -08002523static int __devinit mxser_probe(struct pci_dev *pdev,
2524 const struct pci_device_id *ent)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002525{
Jiri Slaby1c456072008-02-07 00:16:46 -08002526#ifdef CONFIG_PCI
2527 struct mxser_board *brd;
2528 unsigned int i, j;
2529 unsigned long ioaddress;
2530 int retval = -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002531
Jiri Slaby1c456072008-02-07 00:16:46 -08002532 for (i = 0; i < MXSER_BOARDS; i++)
2533 if (mxser_boards[i].info == NULL)
2534 break;
2535
2536 if (i >= MXSER_BOARDS) {
Jiri Slaby83766bc2008-07-25 01:48:21 -07002537 dev_err(&pdev->dev, "too many boards found (maximum %d), board "
2538 "not configured\n", MXSER_BOARDS);
Jiri Slaby1c456072008-02-07 00:16:46 -08002539 goto err;
2540 }
2541
2542 brd = &mxser_boards[i];
2543 brd->idx = i * MXSER_PORTS_PER_BOARD;
Jiri Slaby83766bc2008-07-25 01:48:21 -07002544 dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n",
Jiri Slaby1c456072008-02-07 00:16:46 -08002545 mxser_cards[ent->driver_data].name,
2546 pdev->bus->number, PCI_SLOT(pdev->devfn));
2547
2548 retval = pci_enable_device(pdev);
2549 if (retval) {
Jiri Slaby83766bc2008-07-25 01:48:21 -07002550 dev_err(&pdev->dev, "PCI enable failed\n");
Jiri Slaby1c456072008-02-07 00:16:46 -08002551 goto err;
2552 }
2553
2554 /* io address */
2555 ioaddress = pci_resource_start(pdev, 2);
2556 retval = pci_request_region(pdev, 2, "mxser(IO)");
2557 if (retval)
2558 goto err;
2559
2560 brd->info = &mxser_cards[ent->driver_data];
2561 for (i = 0; i < brd->info->nports; i++)
2562 brd->ports[i].ioaddr = ioaddress + 8 * i;
2563
2564 /* vector */
2565 ioaddress = pci_resource_start(pdev, 3);
2566 retval = pci_request_region(pdev, 3, "mxser(vector)");
2567 if (retval)
2568 goto err_relio;
2569 brd->vector = ioaddress;
2570
2571 /* irq */
2572 brd->irq = pdev->irq;
2573
2574 brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr);
2575 brd->uart_type = PORT_16550A;
2576 brd->vector_mask = 0;
2577
2578 for (i = 0; i < brd->info->nports; i++) {
2579 for (j = 0; j < UART_INFO_NUM; j++) {
2580 if (Gpci_uart_info[j].type == brd->chip_flag) {
2581 brd->ports[i].max_baud =
2582 Gpci_uart_info[j].max_baud;
2583
2584 /* exception....CP-102 */
2585 if (brd->info->flags & MXSER_HIGHBAUD)
2586 brd->ports[i].max_baud = 921600;
2587 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002588 }
2589 }
Jiri Slaby1c456072008-02-07 00:16:46 -08002590 }
2591
2592 if (brd->chip_flag == MOXA_MUST_MU860_HWID) {
2593 for (i = 0; i < brd->info->nports; i++) {
2594 if (i < 4)
2595 brd->ports[i].opmode_ioaddr = ioaddress + 4;
2596 else
2597 brd->ports[i].opmode_ioaddr = ioaddress + 0x0c;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002598 }
Jiri Slaby1c456072008-02-07 00:16:46 -08002599 outb(0, ioaddress + 4); /* default set to RS232 mode */
2600 outb(0, ioaddress + 0x0c); /* default set to RS232 mode */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002601 }
Jiri Slaby1c456072008-02-07 00:16:46 -08002602
2603 for (i = 0; i < brd->info->nports; i++) {
2604 brd->vector_mask |= (1 << i);
2605 brd->ports[i].baud_base = 921600;
2606 }
2607
2608 /* mxser_initbrd will hook ISR. */
2609 retval = mxser_initbrd(brd, pdev);
2610 if (retval)
2611 goto err_null;
2612
2613 for (i = 0; i < brd->info->nports; i++)
2614 tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev);
2615
2616 pci_set_drvdata(pdev, brd);
2617
2618 return 0;
2619err_relio:
2620 pci_release_region(pdev, 2);
2621err_null:
2622 brd->info = NULL;
2623err:
2624 return retval;
2625#else
2626 return -ENODEV;
2627#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07002628}
2629
Jiri Slaby1c456072008-02-07 00:16:46 -08002630static void __devexit mxser_remove(struct pci_dev *pdev)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002631{
Jiri Slaby1c456072008-02-07 00:16:46 -08002632 struct mxser_board *brd = pci_get_drvdata(pdev);
2633 unsigned int i;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002634
Jiri Slaby1c456072008-02-07 00:16:46 -08002635 for (i = 0; i < brd->info->nports; i++)
2636 tty_unregister_device(mxvar_sdriver, brd->idx + i);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002637
Jiri Slaby1c456072008-02-07 00:16:46 -08002638 mxser_release_res(brd, pdev, 1);
2639 brd->info = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002640}
2641
Jiri Slaby1c456072008-02-07 00:16:46 -08002642static struct pci_driver mxser_driver = {
2643 .name = "mxser",
2644 .id_table = mxser_pcibrds,
2645 .probe = mxser_probe,
2646 .remove = __devexit_p(mxser_remove)
2647};
Linus Torvalds1da177e2005-04-16 15:20:36 -07002648
Jiri Slaby1c456072008-02-07 00:16:46 -08002649static int __init mxser_module_init(void)
2650{
2651 struct mxser_board *brd;
Jiri Slaby1df00922008-07-25 01:48:22 -07002652 unsigned int b, i, m;
2653 int retval;
Jiri Slaby1c456072008-02-07 00:16:46 -08002654
Jiri Slaby1c456072008-02-07 00:16:46 -08002655 mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1);
2656 if (!mxvar_sdriver)
2657 return -ENOMEM;
2658
2659 printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n",
2660 MXSER_VERSION);
2661
2662 /* Initialize the tty_driver structure */
2663 mxvar_sdriver->owner = THIS_MODULE;
2664 mxvar_sdriver->magic = TTY_DRIVER_MAGIC;
2665 mxvar_sdriver->name = "ttyMI";
2666 mxvar_sdriver->major = ttymajor;
2667 mxvar_sdriver->minor_start = 0;
2668 mxvar_sdriver->num = MXSER_PORTS + 1;
2669 mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL;
2670 mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL;
2671 mxvar_sdriver->init_termios = tty_std_termios;
2672 mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
2673 mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV;
2674 tty_set_operations(mxvar_sdriver, &mxser_ops);
2675
2676 retval = tty_register_driver(mxvar_sdriver);
2677 if (retval) {
2678 printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family "
2679 "tty driver !\n");
2680 goto err_put;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002681 }
Jiri Slaby1c456072008-02-07 00:16:46 -08002682
Jiri Slaby1c456072008-02-07 00:16:46 -08002683 /* Start finding ISA boards here */
Jiri Slaby1df00922008-07-25 01:48:22 -07002684 for (m = 0, b = 0; b < MXSER_BOARDS; b++) {
2685 if (!ioaddr[b])
2686 continue;
Jiri Slaby1c456072008-02-07 00:16:46 -08002687
Jiri Slaby1df00922008-07-25 01:48:22 -07002688 brd = &mxser_boards[m];
Peter Botha96050df2009-06-09 17:16:32 -07002689 retval = mxser_get_ISA_conf(ioaddr[b], brd);
Jiri Slaby1df00922008-07-25 01:48:22 -07002690 if (retval <= 0) {
2691 brd->info = NULL;
2692 continue;
Jiri Slaby1c456072008-02-07 00:16:46 -08002693 }
2694
Jiri Slaby1df00922008-07-25 01:48:22 -07002695 printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n",
2696 brd->info->name, ioaddr[b]);
2697
2698 /* mxser_initbrd will hook ISR. */
2699 if (mxser_initbrd(brd, NULL) < 0) {
2700 brd->info = NULL;
2701 continue;
2702 }
2703
2704 brd->idx = m * MXSER_PORTS_PER_BOARD;
2705 for (i = 0; i < brd->info->nports; i++)
2706 tty_register_device(mxvar_sdriver, brd->idx + i, NULL);
2707
2708 m++;
2709 }
2710
Jiri Slaby1c456072008-02-07 00:16:46 -08002711 retval = pci_register_driver(&mxser_driver);
2712 if (retval) {
Jiri Slaby83766bc2008-07-25 01:48:21 -07002713 printk(KERN_ERR "mxser: can't register pci driver\n");
Jiri Slaby1c456072008-02-07 00:16:46 -08002714 if (!m) {
2715 retval = -ENODEV;
2716 goto err_unr;
2717 } /* else: we have some ISA cards under control */
2718 }
2719
Jiri Slaby1c456072008-02-07 00:16:46 -08002720 return 0;
2721err_unr:
2722 tty_unregister_driver(mxvar_sdriver);
2723err_put:
2724 put_tty_driver(mxvar_sdriver);
2725 return retval;
2726}
2727
2728static void __exit mxser_module_exit(void)
2729{
2730 unsigned int i, j;
2731
Jiri Slaby1c456072008-02-07 00:16:46 -08002732 pci_unregister_driver(&mxser_driver);
2733
2734 for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */
2735 if (mxser_boards[i].info != NULL)
2736 for (j = 0; j < mxser_boards[i].info->nports; j++)
2737 tty_unregister_device(mxvar_sdriver,
2738 mxser_boards[i].idx + j);
2739 tty_unregister_driver(mxvar_sdriver);
2740 put_tty_driver(mxvar_sdriver);
2741
2742 for (i = 0; i < MXSER_BOARDS; i++)
2743 if (mxser_boards[i].info != NULL)
2744 mxser_release_res(&mxser_boards[i], NULL, 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002745}
2746
2747module_init(mxser_module_init);
2748module_exit(mxser_module_exit);