blob: 659bc910ffd72f060012131b8c6fc05775e3299c [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board
3 *
4 * Copyright (C) 2001,02,03 NEC Electronics Corporation
5 * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
6 *
7 * This file is subject to the terms and conditions of the GNU General
8 * Public License. See the file COPYING in the main directory of this
9 * archive for more details.
10 *
11 * Written by Miles Bader <miles@gnu.org>
12 */
13
14#ifndef __V850_AS85EP1_H__
15#define __V850_AS85EP1_H__
16
17#include <asm/v850e.h>
18
19
20#define CPU_MODEL "as85ep1"
21#define CPU_MODEL_LONG "NEC V850E/AS85EP1"
22#define PLATFORM "AS85EP1"
23#define PLATFORM_LONG "NEC V850E/AS85EP1 evaluation board"
24
25#define CPU_CLOCK_FREQ 96000000 /* 96MHz */
26#define SYS_CLOCK_FREQ CPU_CLOCK_FREQ
27
28
29/* 1MB of static RAM. */
30#define SRAM_ADDR 0x00400000
31#define SRAM_SIZE 0x00100000 /* 1MB */
32/* About 58MB of DRAM. This can actually be at one of two positions,
33 determined by jump JP3; we have to use the first position because the
34 second is partially out of processor instruction addressing range
35 (though in the second position there's actually 64MB available). */
36#define SDRAM_ADDR 0x00600000
37#define SDRAM_SIZE 0x039F8000 /* approx 58MB */
38
39/* For <asm/page.h> */
40#define PAGE_OFFSET SRAM_ADDR
41
42/* We use on-chip RAM, for a few miscellaneous variables that must be
43 accessible using a load instruction relative to R0. The AS85EP1 chip
44 16K of internal RAM located slightly before I/O space. */
45#define R0_RAM_ADDR 0xFFFF8000
46
47
48/* AS85EP1 specific control registers. */
49#define AS85EP1_CSC_ADDR(n) (0xFFFFF060 + (n) * 2)
50#define AS85EP1_CSC(n) (*(volatile u16 *)AS85EP1_CSC_ADDR(n))
51#define AS85EP1_BSC_ADDR 0xFFFFF066
52#define AS85EP1_BSC (*(volatile u16 *)AS85EP1_BSC_ADDR)
53#define AS85EP1_BCT_ADDR(n) (0xFFFFF480 + (n) * 2)
54#define AS85EP1_BCT(n) (*(volatile u16 *)AS85EP1_BCT_ADDR(n))
55#define AS85EP1_DWC_ADDR(n) (0xFFFFF484 + (n) * 2)
56#define AS85EP1_DWC(n) (*(volatile u16 *)AS85EP1_DWC_ADDR(n))
57#define AS85EP1_BCC_ADDR 0xFFFFF488
58#define AS85EP1_BCC (*(volatile u16 *)AS85EP1_BCC_ADDR)
59#define AS85EP1_ASC_ADDR 0xFFFFF48A
60#define AS85EP1_ASC (*(volatile u16 *)AS85EP1_ASC_ADDR)
61#define AS85EP1_BCP_ADDR 0xFFFFF48C
62#define AS85EP1_BCP (*(volatile u16 *)AS85EP1_BCP_ADDR)
63#define AS85EP1_LBS_ADDR 0xFFFFF48E
64#define AS85EP1_LBS (*(volatile u16 *)AS85EP1_LBS_ADDR)
65#define AS85EP1_BMC_ADDR 0xFFFFF498
66#define AS85EP1_BMC (*(volatile u16 *)AS85EP1_BMC_ADDR)
67#define AS85EP1_PRC_ADDR 0xFFFFF49A
68#define AS85EP1_PRC (*(volatile u16 *)AS85EP1_PRC_ADDR)
69#define AS85EP1_SCR_ADDR(n) (0xFFFFF4A0 + (n) * 4)
70#define AS85EP1_SCR(n) (*(volatile u16 *)AS85EP1_SCR_ADDR(n))
71#define AS85EP1_RFS_ADDR(n) (0xFFFFF4A2 + (n) * 4)
72#define AS85EP1_RFS(n) (*(volatile u16 *)AS85EP1_RFS_ADDR(n))
73#define AS85EP1_IRAMM_ADDR 0xFFFFF80A
74#define AS85EP1_IRAMM (*(volatile u8 *)AS85EP1_IRAMM_ADDR)
75
76
77
78/* I/O port P0-P13. */
79/* Direct I/O. Bits 0-7 are pins Pn0-Pn7. */
80#define AS85EP1_PORT_IO_ADDR(n) (0xFFFFF400 + (n) * 2)
81#define AS85EP1_PORT_IO(n) (*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n))
82/* Port mode (for direct I/O, 0 = output, 1 = input). */
83#define AS85EP1_PORT_PM_ADDR(n) (0xFFFFF420 + (n) * 2)
84#define AS85EP1_PORT_PM(n) (*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n))
85/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */
86#define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2)
87#define AS85EP1_PORT_PMC(n) (*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n))
88
89
90/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */
91#define IRQ_INTCCC(n) (0x0C + (n))
92#define IRQ_INTCCC_NUM 8
93#define IRQ_INTCMD(n) (0x14 + (n)) /* interval timer interrupts 0-5 */
94#define IRQ_INTCMD_NUM 6
95#define IRQ_INTSRE(n) (0x1E + (n)*3) /* UART 0-1 reception error */
96#define IRQ_INTSRE_NUM 2
97#define IRQ_INTSR(n) (0x1F + (n)*3) /* UART 0-1 reception completion */
98#define IRQ_INTSR_NUM 2
99#define IRQ_INTST(n) (0x20 + (n)*3) /* UART 0-1 transmission completion */
100#define IRQ_INTST_NUM 2
101
102#define NUM_CPU_IRQS 64
103
104#ifndef __ASSEMBLY__
105/* Initialize chip interrupts. */
106extern void as85ep1_init_irqs (void);
107#endif
108
109
110/* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels). */
111#define V850E_UART_NUM_CHANNELS 2
112#define V850E_UART_BASE_FREQ (SYS_CLOCK_FREQ / 4)
113#define V850E_UART_CHIP_NAME "V850E/NA85E"
114
115/* This is a function that gets called before configuring the UART. */
116#define V850E_UART_PRE_CONFIGURE as85ep1_uart_pre_configure
117#ifndef __ASSEMBLY__
118extern void as85ep1_uart_pre_configure (unsigned chan,
119 unsigned cflags, unsigned baud);
120#endif
121
122/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
123
124/* CTS for UART channel 1 is pin P54 (bit 4 of port 5). */
125#define V850E_UART_CTS(chan) ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1)
126/* RTS for UART channel 1 is pin P53 (bit 3 of port 5). */
127#define V850E_UART_SET_RTS(chan, val) \
128 do { \
129 if (chan == 1) { \
130 unsigned old = AS85EP1_PORT_IO(5); \
131 if (val) \
132 AS85EP1_PORT_IO(5) = old & ~0x8; \
133 else \
134 AS85EP1_PORT_IO(5) = old | 0x8; \
135 } \
136 } while (0)
137
138
139/* Timer C details. */
140#define V850E_TIMER_C_BASE_ADDR 0xFFFFF600
141
142/* Timer D details (the AS85EP1 actually has 5 of these; should change later). */
143#define V850E_TIMER_D_BASE_ADDR 0xFFFFF540
144#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0)
145#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2)
146#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4)
147
148#define V850E_TIMER_D_BASE_FREQ SYS_CLOCK_FREQ
149#define V850E_TIMER_D_TMCD_CS_MIN 2 /* min 2^2 divider */
150
151
152/* For <asm/param.h> */
153#ifndef HZ
154#define HZ 100
155#endif
156
157
158#endif /* __V850_AS85EP1_H__ */