blob: ab9944693f1f38c40852d7dafa45e75b040e907a [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001config MIPS
2 bool
3 default y
4 # Horrible source of confusion. Die, die, die ...
5 select EMBEDDED
6
7config MIPS64
8 bool "64-bit kernel"
9 help
10 Select this option if you want to build a 64-bit kernel. You should
11 only select this option if you have hardware that actually has a
12 64-bit processor and if your application will actually benefit from
13 64-bit processing, otherwise say N. You must say Y for kernels for
14 SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N.
15
16config 64BIT
17 def_bool MIPS64
18
19config MIPS32
20 bool
21 depends on MIPS64 = 'n'
22 default y
23
24mainmenu "Linux/MIPS Kernel Configuration"
25
26source "init/Kconfig"
27
28menu "Machine selection"
29
30config MACH_JAZZ
31 bool "Support for the Jazz family of machines"
32 select ARC
33 select ARC32
34 select GENERIC_ISA_DMA
35 select I8259
36 select ISA
37 help
38 This a family of machines based on the MIPS R4030 chipset which was
39 used by several vendors to build RISC/os and Windows NT workstations.
40 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
41 Olivetti M700-10 workstations.
42
43config ACER_PICA_61
44 bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
45 depends on MACH_JAZZ && EXPERIMENTAL
46 select DMA_NONCOHERENT
47 help
48 This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
49 kernel that runs on these, say Y here. For details about Linux on
50 the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
51 <http://www.linux-mips.org/>.
52
53config MIPS_MAGNUM_4000
54 bool "Support for MIPS Magnum 4000"
55 depends on MACH_JAZZ
56 select DMA_NONCOHERENT
57 help
58 This is a machine with a R4000 100 MHz CPU. To compile a Linux
59 kernel that runs on these, say Y here. For details about Linux on
60 the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
61 <http://www.linux-mips.org/>.
62
63config OLIVETTI_M700
64 bool "Support for Olivetti M700-10"
65 depends on MACH_JAZZ
66 select DMA_NONCOHERENT
67 help
68 This is a machine with a R4000 100 MHz CPU. To compile a Linux
69 kernel that runs on these, say Y here. For details about Linux on
70 the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
71 <http://www.linux-mips.org/>.
72
73config MACH_VR41XX
74 bool "Support for NEC VR41XX-based machines"
75
76config NEC_CMBVR4133
77 bool "Support for NEC CMB-VR4133"
78 depends on MACH_VR41XX
79 select CPU_VR41XX
80 select DMA_NONCOHERENT
81 select IRQ_CPU
82 select HW_HAS_PCI
83 select PCI_VR41XX
84
85config ROCKHOPPER
86 bool "Support for Rockhopper baseboard"
87 depends on NEC_CMBVR4133
88 select I8259
89 select HAVE_STD_PC_SERIAL_PORT
90
91config CASIO_E55
92 bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
93 depends on MACH_VR41XX
94 select DMA_NONCOHERENT
95 select IRQ_CPU
96 select ISA
97
98config IBM_WORKPAD
99 bool "Support for IBM WorkPad z50"
100 depends on MACH_VR41XX
101 select DMA_NONCOHERENT
102 select IRQ_CPU
103 select ISA
104
105config TANBAC_TB0226
106 bool "Support for TANBAC TB0226 (Mbase)"
107 depends on MACH_VR41XX
108 select DMA_NONCOHERENT
109 select HW_HAS_PCI
110 select IRQ_CPU
111 help
112 The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC.
113 Please refer to <http://www.tanbac.co.jp/> about Mbase.
114
115config TANBAC_TB0229
116 bool "Support for TANBAC TB0229 (VR4131DIMM)"
117 depends on MACH_VR41XX
118 select DMA_NONCOHERENT
119 select HW_HAS_PCI
120 select IRQ_CPU
121 help
122 The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC.
123 Please refer to <http://www.tanbac.co.jp/> about VR4131DIMM.
124
125config VICTOR_MPC30X
126 bool "Support for Victor MP-C303/304"
127 select DMA_NONCOHERENT
128 select HW_HAS_PCI
129 select IRQ_CPU
130 depends on MACH_VR41XX
131
132config ZAO_CAPCELLA
133 bool "Support for ZAO Networks Capcella"
134 depends on MACH_VR41XX
135 select DMA_NONCOHERENT
136 select HW_HAS_PCI
137 select IRQ_CPU
138
139config PCI_VR41XX
140 bool "Add PCI control unit support of NEC VR4100 series"
141 depends on MACH_VR41XX && PCI
142
143config VRC4171
144 tristate "Add NEC VRC4171 companion chip support"
145 depends on MACH_VR41XX && ISA
146 ---help---
147 The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121.
148
149config VRC4173
150 tristate "Add NEC VRC4173 companion chip support"
151 depends on MACH_VR41XX && PCI_VR41XX
152 ---help---
153 The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
154
155config TOSHIBA_JMR3927
156 bool "Support for Toshiba JMR-TX3927 board"
157 depends on MIPS32
158 select DMA_NONCOHERENT
159 select HW_HAS_PCI
160 select SWAP_IO_SPACE
161
162config MIPS_COBALT
163 bool "Support for Cobalt Server (EXPERIMENTAL)"
164 depends on EXPERIMENTAL
165 select DMA_NONCOHERENT
166 select HW_HAS_PCI
167 select I8259
168 select IRQ_CPU
169
170config MACH_DECSTATION
171 bool "Support for DECstations"
172 select BOOT_ELF32
173 select DMA_NONCOHERENT
174 select IRQ_CPU
175 depends on MIPS32 || EXPERIMENTAL
176 ---help---
177 This enables support for DEC's MIPS based workstations. For details
178 see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
179 DECstation porting pages on <http://decstation.unix-ag.org/>.
180
181 If you have one of the following DECstation Models you definitely
182 want to choose R4xx0 for the CPU Type:
183
184 DECstation 5000/50
185 DECstation 5000/150
186 DECstation 5000/260
187 DECsystem 5900/260
188
189 otherwise choose R3000.
190
191config MIPS_EV64120
192 bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
193 depends on EXPERIMENTAL
194 select DMA_NONCOHERENT
195 select HW_HAS_PCI
196 select MIPS_GT64120
197 help
198 This is an evaluation board based on the Galileo GT-64120
199 single-chip system controller that contains a MIPS R5000 compatible
200 core running at 75/100MHz. Their website is located at
201 <http://www.marvell.com/>. Say Y here if you wish to build a
202 kernel for this platform.
203
204config EVB_PCI1
205 bool "Enable Second PCI (PCI1)"
206 depends on MIPS_EV64120
207
208config MIPS_EV96100
209 bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
210 depends on EXPERIMENTAL
211 select DMA_NONCOHERENT
212 select HW_HAS_PCI
213 select IRQ_CPU
214 select MIPS_GT96100
215 select RM7000_CPU_SCACHE
216 select SWAP_IO_SPACE
217 help
218 This is an evaluation board based on the Galileo GT-96100 LAN/WAN
219 communications controllers containing a MIPS R5000 compatible core
220 running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
221 here if you wish to build a kernel for this platform.
222
223config MIPS_IVR
224 bool "Support for Globespan IVR board"
225 select DMA_NONCOHERENT
226 select HW_HAS_PCI
227 help
228 This is an evaluation board built by Globespan to showcase thir
229 iVR (Internet Video Recorder) design. It utilizes a QED RM5231
230 R5000 MIPS core. More information can be found out their website
231 located at <http://www.globespan.net/>. Say Y here if you wish to
232 build a kernel for this platform.
233
234config LASAT
235 bool "Support for LASAT Networks platforms"
236 select DMA_NONCOHERENT
237 select HW_HAS_PCI
238 select MIPS_GT64120
239 select R5000_CPU_SCACHE
240
241config PICVUE
242 tristate "PICVUE LCD display driver"
243 depends on LASAT
244
245config PICVUE_PROC
246 tristate "PICVUE LCD display driver /proc interface"
247 depends on PICVUE
248
249config DS1603
250 bool "DS1603 RTC driver"
251 depends on LASAT
252
253config LASAT_SYSCTL
254 bool "LASAT sysctl interface"
255 depends on LASAT
256
257config MIPS_ITE8172
258 bool "Support for ITE 8172G board"
259 select DMA_NONCOHERENT
260 select HW_HAS_PCI
261 help
262 Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
263 with ATX form factor that utilizes a MIPS R5000 to work with its
264 ITE8172G companion internet appliance chip. The MIPS core can be
265 either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
266 a kernel for this platform.
267
268config IT8172_REVC
269 bool "Support for older IT8172 (Rev C)"
270 depends on MIPS_ITE8172
271 help
272 Say Y here to support the older, Revision C version of the Integrated
273 Technology Express, Inc. ITE8172 SBC. Vendor page at
274 <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
275 board at <http://www.mvista.com/partners/semiconductor/ite.html>.
276
277config MIPS_ATLAS
278 bool "Support for MIPS Atlas board"
279 select BOOT_ELF32
280 select DMA_NONCOHERENT
281 select HW_HAS_PCI
282 select MIPS_GT64120
283 select SWAP_IO_SPACE
284 help
285 This enables support for the QED R5231-based MIPS Atlas evaluation
286 board.
287
288config MIPS_MALTA
289 bool "Support for MIPS Malta board"
290 select BOOT_ELF32
291 select HAVE_STD_PC_SERIAL_PORT
292 select DMA_NONCOHERENT
293 select GENERIC_ISA_DMA
294 select HW_HAS_PCI
295 select I8259
296 select MIPS_GT64120
297 select SWAP_IO_SPACE
298 help
299 This enables support for the VR5000-based MIPS Malta evaluation
300 board.
301
302config MIPS_SEAD
303 bool "Support for MIPS SEAD board (EXPERIMENTAL)"
304 depends on EXPERIMENTAL
305 select IRQ_CPU
306 select DMA_NONCOHERENT
307
308config MOMENCO_OCELOT
309 bool "Support for Momentum Ocelot board"
310 select DMA_NONCOHERENT
311 select HW_HAS_PCI
312 select IRQ_CPU
313 select IRQ_CPU_RM7K
314 select MIPS_GT64120
315 select RM7000_CPU_SCACHE
316 select SWAP_IO_SPACE
317 help
318 The Ocelot is a MIPS-based Single Board Computer (SBC) made by
319 Momentum Computer <http://www.momenco.com/>.
320
321config MOMENCO_OCELOT_G
322 bool "Support for Momentum Ocelot-G board"
323 select DMA_NONCOHERENT
324 select HW_HAS_PCI
325 select IRQ_CPU
326 select IRQ_CPU_RM7K
327 select PCI_MARVELL
328 select RM7000_CPU_SCACHE
329 select SWAP_IO_SPACE
330 help
331 The Ocelot is a MIPS-based Single Board Computer (SBC) made by
332 Momentum Computer <http://www.momenco.com/>.
333
334config MOMENCO_OCELOT_C
335 bool "Support for Momentum Ocelot-C board"
336 select DMA_NONCOHERENT
337 select HW_HAS_PCI
338 select IRQ_CPU
339 select IRQ_MV64340
340 select PCI_MARVELL
341 select RM7000_CPU_SCACHE
342 select SWAP_IO_SPACE
343 help
344 The Ocelot is a MIPS-based Single Board Computer (SBC) made by
345 Momentum Computer <http://www.momenco.com/>.
346
347config MOMENCO_OCELOT_3
348 bool "Support for Momentum Ocelot-3 board"
349 select BOOT_ELF32
350 select DMA_NONCOHERENT
351 select HW_HAS_PCI
352 select IRQ_CPU
353 select IRQ_CPU_RM7K
354 select IRQ_MV64340
355 select PCI_MARVELL
356 select RM7000_CPU_SCACHE
357 select SWAP_IO_SPACE
358 help
359 The Ocelot-3 is based off Discovery III System Controller and
360 PMC-Sierra Rm79000 core.
361
362config MOMENCO_JAGUAR_ATX
363 bool "Support for Momentum Jaguar board"
364 select BOOT_ELF32
365 select DMA_NONCOHERENT
366 select HW_HAS_PCI
367 select IRQ_CPU
368 select IRQ_CPU_RM7K
369 select IRQ_MV64340
370 select LIMITED_DMA
371 select PCI_MARVELL
372 select RM7000_CPU_SCACHE
373 select SWAP_IO_SPACE
374 help
375 The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
376 Momentum Computer <http://www.momenco.com/>.
377
378config JAGUAR_DMALOW
379 bool "Low DMA Mode"
380 depends on MOMENCO_JAGUAR_ATX
381 help
382 Select to Y if jump JP5 is set on your board, N otherwise. Normally
383 the jumper is set, so if you feel unsafe, just say Y.
384
385config PMC_YOSEMITE
386 bool "Support for PMC-Sierra Yosemite eval board"
387 select DMA_COHERENT
388 select HW_HAS_PCI
389 select IRQ_CPU
390 select IRQ_CPU_RM7K
391 select IRQ_CPU_RM9K
392 select SWAP_IO_SPACE
393 help
394 Yosemite is an evaluation board for the RM9000x2 processor
395 manufactured by PMC-Sierra
396
397config HYPERTRANSPORT
398 bool "Hypertransport Support for PMC-Sierra Yosemite"
399 depends on PMC_YOSEMITE
400
401config DDB5074
402 bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
403 depends on EXPERIMENTAL
404 select DMA_NONCOHERENT
405 select HAVE_STD_PC_SERIAL_PORT
406 select HW_HAS_PCI
407 select IRQ_CPU
408 select I8259
409 select ISA
410 help
411 This enables support for the VR5000-based NEC DDB Vrc-5074
412 evaluation board.
413
414config DDB5476
415 bool "Support for NEC DDB Vrc-5476"
416 select DMA_NONCOHERENT
417 select HAVE_STD_PC_SERIAL_PORT
418 select HW_HAS_PCI
419 select IRQ_CPU
420 select I8259
421 select ISA
422 help
423 This enables support for the R5432-based NEC DDB Vrc-5476
424 evaluation board.
425
426 Features : kernel debugging, serial terminal, NFS root fs, on-board
427 ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
428 IDE controller, PS2 keyboard, PS2 mouse, etc.
429
430config DDB5477
431 bool "Support for NEC DDB Vrc-5477"
432 select DMA_NONCOHERENT
433 select HW_HAS_PCI
434 select I8259
435 select IRQ_CPU
436 help
437 This enables support for the R5432-based NEC DDB Vrc-5477,
438 or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
439
440 Features : kernel debugging, serial terminal, NFS root fs, on-board
441 ether port USB, AC97, PCI, etc.
442
443config DDB5477_BUS_FREQUENCY
444 int "bus frequency (in kHZ, 0 for auto-detect)"
445 depends on DDB5477
446 default 0
447
448config NEC_OSPREY
449 bool "Support for NEC Osprey board"
450 select DMA_NONCOHERENT
451 select IRQ_CPU
452
453config SGI_IP22
454 bool "Support for SGI IP22 (Indy/Indigo2)"
455 select ARC
456 select ARC32
457 select BOOT_ELF32
458 select DMA_NONCOHERENT
459 select IP22_CPU_SCACHE
460 select IRQ_CPU
461 select SWAP_IO_SPACE
462 help
463 This are the SGI Indy, Challenge S and Indigo2, as well as certain
464 OEM variants like the Tandem CMN B006S. To compile a Linux kernel
465 that runs on these, say Y here.
466
467config SGI_IP27
468 bool "Support for SGI IP27 (Origin200/2000)"
469 depends on MIPS64
470 select ARC
471 select ARC64
472 select DMA_IP27
473 select HW_HAS_PCI
474 select PCI_DOMAINS
475 help
476 This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
477 workstations. To compile a Linux kernel that runs on these, say Y
478 here.
479
480#config SGI_SN0_XXL
481# bool "IP27 XXL"
482# depends on SGI_IP27
483# This options adds support for userspace processes upto 16TB size.
484# Normally the limit is just .5TB.
485
486config SGI_SN0_N_MODE
487 bool "IP27 N-Mode"
488 depends on SGI_IP27
489 help
490 The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
491 configured in either N-Modes which allows for more nodes or M-Mode
492 which allows for more memory. Your system is most probably
493 running in M-Mode, so you should say N here.
494
495config DISCONTIGMEM
496 bool
497 default y if SGI_IP27
498 help
499 Say Y to upport efficient handling of discontiguous physical memory,
500 for architectures which are either NUMA (Non-Uniform Memory Access)
501 or have huge holes in the physical address space for other reasons.
502 See <file:Documentation/vm/numa> for more.
503
504config NUMA
505 bool "NUMA Support"
506 depends on SGI_IP27
507 help
508 Say Y to compile the kernel to support NUMA (Non-Uniform Memory
509 Access). This option is for configuring high-end multiprocessor
510 server machines. If in doubt, say N.
511
512config MAPPED_KERNEL
513 bool "Mapped kernel support"
514 depends on SGI_IP27
515 help
516 Change the way a Linux kernel is loaded into memory on a MIPS64
517 machine. This is required in order to support text replication and
518 NUMA. If you need to understand it, read the source code.
519
520config REPLICATE_KTEXT
521 bool "Kernel text replication support"
522 depends on SGI_IP27
523 help
524 Say Y here to enable replicating the kernel text across multiple
525 nodes in a NUMA cluster. This trades memory for speed.
526
527config REPLICATE_EXHANDLERS
528 bool "Exception handler replication support"
529 depends on SGI_IP27
530 help
531 Say Y here to enable replicating the kernel exception handlers
532 across multiple nodes in a NUMA cluster. This trades memory for
533 speed.
534
535config SGI_IP32
536 bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
537 depends on MIPS64 && EXPERIMENTAL
538 select ARC
539 select ARC32
540 select BOOT_ELF32
541 select OWN_DMA
542 select DMA_IP32
543 select DMA_NONCOHERENT
544 select HW_HAS_PCI
545 select R5000_CPU_SCACHE
546 select RM7000_CPU_SCACHE
547 help
548 If you want this kernel to run on SGI O2 workstation, say Y here.
549
550config SOC_AU1X00
551 depends on MIPS32
552 bool "Support for AMD/Alchemy Au1X00 SOCs"
553
554choice
555 prompt "Au1X00 SOC Type"
556 depends on SOC_AU1X00
557 help
558 Say Y here to enable support for one of three AMD/Alchemy
559 SOCs. For additional documentation see www.amd.com.
560
561config SOC_AU1000
562 bool "SOC_AU1000"
563config SOC_AU1100
564 bool "SOC_AU1100"
565config SOC_AU1500
566 bool "SOC_AU1500"
567config SOC_AU1550
568 bool "SOC_AU1550"
569
570endchoice
571
572choice
573 prompt "AMD/Alchemy Au1x00 board support"
574 depends on SOC_AU1X00
575 help
576 These are evaluation boards built by AMD/Alchemy to
577 showcase their Au1X00 Internet Edge Processors. The SOC design
578 is based on the MIPS32 architecture running at 266/400/500MHz
579 with many integrated peripherals. Further information can be
580 found at their website, <http://www.amd.com/>. Say Y here if you
581 wish to build a kernel for this platform.
582
583config MIPS_PB1000
584 bool "PB1000 board"
585 depends on SOC_AU1000
586 select DMA_NONCOHERENT
587 select HW_HAS_PCI
588 select SWAP_IO_SPACE
589
590config MIPS_PB1100
591 bool "PB1100 board"
592 depends on SOC_AU1100
593 select DMA_NONCOHERENT
594 select HW_HAS_PCI
595 select SWAP_IO_SPACE
596
597config MIPS_PB1500
598 bool "PB1500 board"
599 depends on SOC_AU1500
600 select DMA_COHERENT
601 select HW_HAS_PCI
602
603config MIPS_PB1550
604 bool "PB1550 board"
605 depends on SOC_AU1550
606 select DMA_COHERENT
607 select HW_HAS_PCI
608 select MIPS_DISABLE_OBSOLETE_IDE
609
610config MIPS_DB1000
611 bool "DB1000 board"
612 depends on SOC_AU1000
613 select DMA_NONCOHERENT
614 select HW_HAS_PCI
615
616config MIPS_DB1100
617 bool "DB1100 board"
618 depends on SOC_AU1100
619 select DMA_NONCOHERENT
620
621config MIPS_DB1500
622 bool "DB1500 board"
623 depends on SOC_AU1500
624 select DMA_COHERENT
625 select HW_HAS_PCI
626 select MIPS_DISABLE_OBSOLETE_IDE
627
628config MIPS_DB1550
629 bool "DB1550 board"
630 depends on SOC_AU1550
631 select HW_HAS_PCI
632 select DMA_COHERENT
633 select MIPS_DISABLE_OBSOLETE_IDE
634
635config MIPS_BOSPORUS
636 bool "Bosporus board"
637 depends on SOC_AU1500
638 select DMA_NONCOHERENT
639
640config MIPS_MIRAGE
641 bool "Mirage board"
642 depends on SOC_AU1500
643 select DMA_NONCOHERENT
644
645config MIPS_XXS1500
646 bool "MyCable XXS1500 board"
647 depends on SOC_AU1500
648 select DMA_NONCOHERENT
649
650config MIPS_MTX1
651 bool "4G Systems MTX-1 board"
652 depends on SOC_AU1500
653 select HW_HAS_PCI
654 select DMA_NONCOHERENT
655
656endchoice
657
658config SIBYTE_SB1xxx_SOC
659 bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
660 depends on EXPERIMENTAL
661 select BOOT_ELF32
662 select DMA_COHERENT
663 select SWAP_IO_SPACE
664
665choice
666 prompt "BCM1xxx SOC-based board"
667 depends on SIBYTE_SB1xxx_SOC
668 default SIBYTE_SWARM
669 help
670 Enable support for boards based on the SiByte line of SOCs
671 from Broadcom. There are configurations for the known
672 evaluation boards, or you can choose "Other" and add your
673 own board support code.
674
675config SIBYTE_SWARM
676 bool "BCM91250A-SWARM"
677 select SIBYTE_SB1250
678
679config SIBYTE_SENTOSA
680 bool "BCM91250E-Sentosa"
681 select SIBYTE_SB1250
682
683config SIBYTE_RHONE
684 bool "BCM91125E-Rhone"
685 select SIBYTE_BCM1125H
686
687config SIBYTE_CARMEL
688 bool "BCM91120x-Carmel"
689 select SIBYTE_BCM1120
690
691config SIBYTE_PTSWARM
692 bool "BCM91250PT-PTSWARM"
693 select SIBYTE_SB1250
694
695config SIBYTE_LITTLESUR
696 bool "BCM91250C2-LittleSur"
697 select SIBYTE_SB1250
698
699config SIBYTE_CRHINE
700 bool "BCM91120C-CRhine"
701 select SIBYTE_BCM1120
702
703config SIBYTE_CRHONE
704 bool "BCM91125C-CRhone"
705 select SIBYTE_BCM1125
706
707config SIBYTE_UNKNOWN
708 bool "Other"
709
710endchoice
711
712config SIBYTE_BOARD
713 bool
714 depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
715 default y
716
717choice
718 prompt "BCM1xxx SOC Type"
719 depends on SIBYTE_UNKNOWN
720 default SIBYTE_UNK_BCM1250
721 help
722 Since you haven't chosen a known evaluation board from
723 Broadcom, you must explicitly pick the SOC this kernel is
724 targetted for.
725
726config SIBYTE_UNK_BCM1250
727 bool "BCM1250"
728 select SIBYTE_SB1250
729
730config SIBYTE_UNK_BCM1120
731 bool "BCM1120"
732 select SIBYTE_BCM1120
733
734config SIBYTE_UNK_BCM1125
735 bool "BCM1125"
736 select SIBYTE_BCM1125
737
738config SIBYTE_UNK_BCM1125H
739 bool "BCM1125H"
740 select SIBYTE_BCM1125H
741
742endchoice
743
744config SIBYTE_SB1250
745 bool
746 select HW_HAS_PCI
747
748config SIBYTE_BCM1120
749 bool
750 select SIBYTE_BCM112X
751
752config SIBYTE_BCM1125
753 bool
754 select HW_HAS_PCI
755 select SIBYTE_BCM112X
756
757config SIBYTE_BCM1125H
758 bool
759 select HW_HAS_PCI
760 select SIBYTE_BCM112X
761
762config SIBYTE_BCM112X
763 bool
764
765choice
766 prompt "SiByte SOC Stepping"
767 depends on SIBYTE_SB1xxx_SOC
768
769config CPU_SB1_PASS_1
770 bool "1250 Pass1"
771 depends on SIBYTE_SB1250
772 select CPU_HAS_PREFETCH
773
774config CPU_SB1_PASS_2_1250
775 bool "1250 An"
776 depends on SIBYTE_SB1250
777 select CPU_SB1_PASS_2
778 help
779 Also called BCM1250 Pass 2
780
781config CPU_SB1_PASS_2_2
782 bool "1250 Bn"
783 depends on SIBYTE_SB1250
784 select CPU_HAS_PREFETCH
785 help
786 Also called BCM1250 Pass 2.2
787
788config CPU_SB1_PASS_4
789 bool "1250 Cn"
790 depends on SIBYTE_SB1250
791 select CPU_HAS_PREFETCH
792 help
793 Also called BCM1250 Pass 3
794
795config CPU_SB1_PASS_2_112x
796 bool "112x Hybrid"
797 depends on SIBYTE_BCM112X
798 select CPU_SB1_PASS_2
799
800config CPU_SB1_PASS_3
801 bool "112x An"
802 depends on SIBYTE_BCM112X
803 select CPU_HAS_PREFETCH
804
805endchoice
806
807config CPU_SB1_PASS_2
808 bool
809
810config SIBYTE_HAS_LDT
811 bool
812 depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
813 default y
814
815config SIMULATION
816 bool "Running under simulation"
817 depends on SIBYTE_SB1xxx_SOC
818 help
819 Build a kernel suitable for running under the GDB simulator.
820 Primarily adjusts the kernel's notion of time.
821
822config SIBYTE_CFE
823 bool "Booting from CFE"
824 depends on SIBYTE_SB1xxx_SOC
825 help
826 Make use of the CFE API for enumerating available memory,
827 controlling secondary CPUs, and possibly console output.
828
829config SIBYTE_CFE_CONSOLE
830 bool "Use firmware console"
831 depends on SIBYTE_CFE
832 help
833 Use the CFE API's console write routines during boot. Other console
834 options (VT console, sb1250 duart console, etc.) should not be
835 configured.
836
837config SIBYTE_STANDALONE
838 bool
839 depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
840 default y
841
842config SIBYTE_STANDALONE_RAM_SIZE
843 int "Memory size (in megabytes)"
844 depends on SIBYTE_STANDALONE
845 default "32"
846
847config SIBYTE_BUS_WATCHER
848 bool "Support for Bus Watcher statistics"
849 depends on SIBYTE_SB1xxx_SOC
850 help
851 Handle and keep statistics on the bus error interrupts (COR_ECC,
852 BAD_ECC, IO_BUS).
853
854config SIBYTE_BW_TRACE
855 bool "Capture bus trace before bus error"
856 depends on SIBYTE_BUS_WATCHER
857 help
858 Run a continuous bus trace, dumping the raw data as soon as
859 a ZBbus error is detected. Cannot work if ZBbus profiling
860 is turned on, and also will interfere with JTAG-based trace
861 buffer activity. Raw buffer data is dumped to console, and
862 must be processed off-line.
863
864config SIBYTE_SB1250_PROF
865 bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
866 depends on SIBYTE_SB1xxx_SOC
867
868config SIBYTE_TBPROF
869 bool "Support for ZBbus profiling"
870 depends on SIBYTE_SB1xxx_SOC
871
872config SNI_RM200_PCI
873 bool "Support for SNI RM200 PCI"
874 select ARC
875 select ARC32
876 select BOOT_ELF32
877 select DMA_NONCOHERENT
878 select GENERIC_ISA_DMA
879 select HAVE_STD_PC_SERIAL_PORT
880 select HW_HAS_PCI
881 select I8259
882 select ISA
883 help
884 The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
885 Nixdorf Informationssysteme (SNI), parent company of Pyramid
886 Technology and now in turn merged with Fujitsu. Say Y here to
887 support this machine type.
888
889config TOSHIBA_RBTX4927
890 bool "Support for Toshiba TBTX49[23]7 board"
891 depends on MIPS32
892 select DMA_NONCOHERENT
893 select HAS_TXX9_SERIAL
894 select HW_HAS_PCI
895 select I8259
896 select ISA
897 select SWAP_IO_SPACE
898 help
899 This Toshiba board is based on the TX4927 processor. Say Y here to
900 support this machine type
901
902config TOSHIBA_FPCIB0
903 bool "FPCIB0 Backplane Support"
904 depends on TOSHIBA_RBTX4927
905
906config RWSEM_GENERIC_SPINLOCK
907 bool
908 default y
909
910config RWSEM_XCHGADD_ALGORITHM
911 bool
912
913config GENERIC_CALIBRATE_DELAY
914 bool
915 default y
916
917config HAVE_DEC_LOCK
918 bool
919 default y
920
921#
922# Select some configuration options automatically based on user selections.
923#
924config ARC
925 bool
926 depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
927 default y
928
929config DMA_COHERENT
930 bool
931
932config DMA_IP27
933 bool
934
935config DMA_NONCOHERENT
936 bool
937
938config EARLY_PRINTK
939 bool
940 depends on MACH_DECSTATION
941 default y
942
943config GENERIC_ISA_DMA
944 bool
945 depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
946 default y
947
948config I8259
949 bool
950 depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
951 default y
952
953config LIMITED_DMA
954 bool
955 select HIGHMEM
956
957config MIPS_BONITO64
958 bool
959 depends on MIPS_ATLAS || MIPS_MALTA
960 default y
961
962config MIPS_MSC
963 bool
964 depends on MIPS_ATLAS || MIPS_MALTA
965 default y
966
967config MIPS_NILE4
968 bool
969 depends on LASAT
970 default y
971
972config MIPS_DISABLE_OBSOLETE_IDE
973 bool
974
975config CPU_LITTLE_ENDIAN
976 bool "Generate little endian code"
977 default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
978 default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
979 help
980 Some MIPS machines can be configured for either little or big endian
981 byte order. These modes require different kernels. Say Y if your
982 machine is little endian, N if it's a big endian machine.
983
984config IRQ_CPU
985 bool
986
987config IRQ_CPU_RM7K
988 bool
989
990config IRQ_MV64340
991 bool
992
993config DDB5XXX_COMMON
994 bool
995 depends on DDB5074 || DDB5476 || DDB5477
996 default y
997
998config MIPS_BOARDS_GEN
999 bool
1000 depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
1001 default y
1002
1003config MIPS_GT64111
1004 bool
1005 depends on MIPS_COBALT
1006 default y
1007
1008config MIPS_GT64120
1009 bool
1010 depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
1011 default y
1012
1013config MIPS_TX3927
1014 bool
1015 depends on TOSHIBA_JMR3927
1016 select HAS_TXX9_SERIAL
1017 default y
1018
1019config PCI_MARVELL
1020 bool
1021
1022config ITE_BOARD_GEN
1023 bool
1024 depends on MIPS_IVR || MIPS_ITE8172
1025 default y
1026
1027config SWAP_IO_SPACE
1028 bool
1029
1030#
1031# Unfortunately not all GT64120 systems run the chip at the same clock.
1032# As the user for the clock rate and try to minimize the available options.
1033#
1034choice
1035 prompt "Galileo Chip Clock"
1036 #default SYSCLK_83 if MIPS_EV64120
1037 depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
1038 default SYSCLK_83 if MIPS_EV64120
1039 default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
1040
1041config SYSCLK_75
1042 bool "75" if MIPS_EV64120
1043
1044config SYSCLK_83
1045 bool "83.3" if MIPS_EV64120
1046
1047config SYSCLK_100
1048 bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
1049
1050endchoice
1051
1052config AU1X00_USB_DEVICE
1053 bool
1054 depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
1055 default n
1056
1057config MIPS_GT96100
1058 bool
1059 depends on MIPS_EV96100
1060 default y
1061 help
1062 Say Y here to support the Galileo Technology GT96100 communications
1063 controller card. There is a web page at <http://www.galileot.com/>.
1064
1065config IT8172_CIR
1066 bool
1067 depends on MIPS_ITE8172 || MIPS_IVR
1068 default y
1069
1070config IT8712
1071 bool
1072 depends on MIPS_ITE8172
1073 default y
1074
1075config BOOT_ELF32
1076 bool
1077 depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
1078 default y
1079
1080config MIPS_L1_CACHE_SHIFT
1081 int
1082 default "4" if MACH_DECSTATION
1083 default "7" if SGI_IP27
1084 default "5"
1085
1086config ARC32
1087 bool
1088 depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
1089 default y
1090
1091config FB
1092 bool
1093 depends on MIPS_MAGNUM_4000 || OLIVETTI_M700
1094 default y
1095 ---help---
1096 The frame buffer device provides an abstraction for the graphics
1097 hardware. It represents the frame buffer of some video hardware and
1098 allows application software to access the graphics hardware through
1099 a well-defined interface, so the software doesn't need to know
1100 anything about the low-level (hardware register) stuff.
1101
1102 Frame buffer devices work identically across the different
1103 architectures supported by Linux and make the implementation of
1104 application programs easier and more portable; at this point, an X
1105 server exists which uses the frame buffer device exclusively.
1106 On several non-X86 architectures, the frame buffer device is the
1107 only way to use the graphics hardware.
1108
1109 The device is accessed through special device nodes, usually located
1110 in the /dev directory, i.e. /dev/fb*.
1111
1112 You need an utility program called fbset to make full use of frame
1113 buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
1114 and the Framebuffer-HOWTO at <http://www.tldp.org/docs.html#howto>
1115 for more information.
1116
1117 Say Y here and to the driver for your graphics board below if you
1118 are compiling a kernel for a non-x86 architecture.
1119
1120 If you are compiling for the x86 architecture, you can say Y if you
1121 want to play with it, but it is not essential. Please note that
1122 running graphical applications that directly touch the hardware
1123 (e.g. an accelerated X server) and that are not frame buffer
1124 device-aware may cause unexpected results. If unsure, say N.
1125
1126config HAVE_STD_PC_SERIAL_PORT
1127 bool
1128
1129config VR4181
1130 bool
1131 depends on NEC_OSPREY
1132 default y
1133
1134config ARC_CONSOLE
1135 bool "ARC console support"
1136 depends on SGI_IP22 || SNI_RM200_PCI
1137
1138config ARC_MEMORY
1139 bool
1140 depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
1141 default y
1142
1143config ARC_PROMLIB
1144 bool
1145 depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
1146 default y
1147
1148config ARC64
1149 bool
1150 depends on SGI_IP27
1151 default y
1152
1153config BOOT_ELF64
1154 bool
1155 depends on SGI_IP27
1156 default y
1157
1158#config MAPPED_PCI_IO y
1159# bool
1160# depends on SGI_IP27
1161# default y
1162
1163config QL_ISP_A64
1164 bool
1165 depends on SGI_IP27
1166 default y
1167
1168config TOSHIBA_BOARDS
1169 bool
1170 depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
1171 default y
1172
1173endmenu
1174
1175menu "CPU selection"
1176
1177choice
1178 prompt "CPU type"
1179 default CPU_R4X00
1180
1181config CPU_MIPS32
1182 bool "MIPS32"
1183
1184config CPU_MIPS64
1185 bool "MIPS64"
1186
1187config CPU_R3000
1188 bool "R3000"
1189 depends on MIPS32
1190 help
1191 Please make sure to pick the right CPU type. Linux/MIPS is not
1192 designed to be generic, i.e. Kernels compiled for R3000 CPUs will
1193 *not* work on R4000 machines and vice versa. However, since most
1194 of the supported machines have an R4000 (or similar) CPU, R4x00
1195 might be a safe bet. If the resulting kernel does not work,
1196 try to recompile with R3000.
1197
1198config CPU_TX39XX
1199 bool "R39XX"
1200 depends on MIPS32
1201
1202config CPU_VR41XX
1203 bool "R41xx"
1204 help
1205 The options selects support for the NEC VR41xx series of processors.
1206 Only choose this option if you have one of these processors as a
1207 kernel built with this option will not run on any other type of
1208 processor or vice versa.
1209
1210config CPU_R4300
1211 bool "R4300"
1212 help
1213 MIPS Technologies R4300-series processors.
1214
1215config CPU_R4X00
1216 bool "R4x00"
1217 help
1218 MIPS Technologies R4000-series processors other than 4300, including
1219 the R4000, R4400, R4600, and 4700.
1220
1221config CPU_TX49XX
1222 bool "R49XX"
1223
1224config CPU_R5000
1225 bool "R5000"
1226 help
1227 MIPS Technologies R5000-series processors other than the Nevada.
1228
1229config CPU_R5432
1230 bool "R5432"
1231
1232config CPU_R6000
1233 bool "R6000"
1234 depends on MIPS32 && EXPERIMENTAL
1235 help
1236 MIPS Technologies R6000 and R6000A series processors. Note these
1237 processors are extremly rare and the support for them is incomplete.
1238
1239config CPU_NEVADA
1240 bool "RM52xx"
1241 help
1242 QED / PMC-Sierra RM52xx-series ("Nevada") processors.
1243
1244config CPU_R8000
1245 bool "R8000"
1246 depends on MIPS64 && EXPERIMENTAL
1247 help
1248 MIPS Technologies R8000 processors. Note these processors are
1249 uncommon and the support for them is incomplete.
1250
1251config CPU_R10000
1252 bool "R10000"
1253 help
1254 MIPS Technologies R10000-series processors.
1255
1256config CPU_RM7000
1257 bool "RM7000"
1258
1259config CPU_RM9000
1260 bool "RM9000"
1261
1262config CPU_SB1
1263 bool "SB1"
1264
1265endchoice
1266
1267choice
1268 prompt "Kernel page size"
1269 default PAGE_SIZE_4KB
1270
1271config PAGE_SIZE_4KB
1272 bool "4kB"
1273 help
1274 This option select the standard 4kB Linux page size. On some
1275 R3000-family processors this is the only available page size. Using
1276 4kB page size will minimize memory consumption and is therefore
1277 recommended for low memory systems.
1278
1279config PAGE_SIZE_8KB
1280 bool "8kB"
1281 depends on EXPERIMENTAL && CPU_R8000
1282 help
1283 Using 8kB page size will result in higher performance kernel at
1284 the price of higher memory consumption. This option is available
1285 only on the R8000 processor. Not that at the time of this writing
1286 this option is still high experimental; there are also issues with
1287 compatibility of user applications.
1288
1289config PAGE_SIZE_16KB
1290 bool "16kB"
1291 depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
1292 help
1293 Using 16kB page size will result in higher performance kernel at
1294 the price of higher memory consumption. This option is available on
1295 all non-R3000 family processor. Not that at the time of this
1296 writing this option is still high experimental; there are also
1297 issues with compatibility of user applications.
1298
1299config PAGE_SIZE_64KB
1300 bool "64kB"
1301 depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
1302 help
1303 Using 64kB page size will result in higher performance kernel at
1304 the price of higher memory consumption. This option is available on
1305 all non-R3000 family processor. Not that at the time of this
1306 writing this option is still high experimental; there are also
1307 issues with compatibility of user applications.
1308
1309endchoice
1310
1311config BOARD_SCACHE
1312 bool
1313
1314config IP22_CPU_SCACHE
1315 bool
1316 select BOARD_SCACHE
1317
1318config R5000_CPU_SCACHE
1319 bool
1320 select BOARD_SCACHE
1321
1322config RM7000_CPU_SCACHE
1323 bool
1324 select BOARD_SCACHE
1325
1326config SIBYTE_DMA_PAGEOPS
1327 bool "Use DMA to clear/copy pages"
1328 depends on CPU_SB1
1329 help
1330 Instead of using the CPU to zero and copy pages, use a Data Mover
1331 channel. These DMA channels are otherwise unused by the standard
1332 SiByte Linux port. Seems to give a small performance benefit.
1333
1334config CPU_HAS_PREFETCH
1335 bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
1336 default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
1337
1338config VTAG_ICACHE
1339 bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
1340 default y if CPU_SB1
1341
1342config SB1_PASS_1_WORKAROUNDS
1343 bool
1344 depends on CPU_SB1_PASS_1
1345 default y
1346
1347config SB1_PASS_2_WORKAROUNDS
1348 bool
1349 depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
1350 default y
1351
1352config SB1_PASS_2_1_WORKAROUNDS
1353 bool
1354 depends on CPU_SB1 && CPU_SB1_PASS_2
1355 default y
1356
1357config 64BIT_PHYS_ADDR
1358 bool "Support for 64-bit physical address space"
1359 depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32
1360
1361config CPU_ADVANCED
1362 bool "Override CPU Options"
1363 depends on MIPS32
1364 help
1365 Saying yes here allows you to select support for various features
1366 your CPU may or may not have. Most people should say N here.
1367
1368config CPU_HAS_LLSC
1369 bool "ll/sc Instructions available" if CPU_ADVANCED
1370 default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX
1371 help
1372 MIPS R4000 series and later provide the Load Linked (ll)
1373 and Store Conditional (sc) instructions. More information is
1374 available at <http://www.go-ecs.com/mips/miptek1.htm>.
1375
1376 Say Y here if your CPU has the ll and sc instructions. Say Y here
1377 for better performance, N if you don't know. You must say Y here
1378 for multiprocessor machines.
1379
1380config CPU_HAS_LLDSCD
1381 bool "lld/scd Instructions available" if CPU_ADVANCED
1382 default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
1383 help
1384 Say Y here if your CPU has the lld and scd instructions, the 64-bit
1385 equivalents of ll and sc. Say Y here for better performance, N if
1386 you don't know. You must say Y here for multiprocessor machines.
1387
1388config CPU_HAS_WB
1389 bool "Writeback Buffer available" if CPU_ADVANCED
1390 default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION
1391 help
1392 Say N here for slightly better performance. You must say Y here for
1393 machines which require flushing of write buffers in software. Saying
1394 Y is the safe option; N may result in kernel malfunction and crashes.
1395
1396config CPU_HAS_SYNC
1397 bool
1398 depends on !CPU_R3000
1399 default y
1400
1401#
1402# - Highmem only makes sense for the 32-bit kernel.
1403# - The current highmem code will only work properly on physically indexed
1404# caches such as R3000, SB1, R7000 or those that look like they're virtually
1405# indexed such as R4000/R4400 SC and MC versions or R10000. So for the
1406# moment we protect the user and offer the highmem option only on machines
1407# where it's known to be safe. This will not offer highmem on a few systems
1408# such as MIPS32 and MIPS64 CPUs which may have virtual and physically
1409# indexed CPUs but we're playing safe.
1410# - We should not offer highmem for system of which we already know that they
1411# don't have memory configurations that could gain from highmem support in
1412# the kernel because they don't support configurations with RAM at physical
1413# addresses > 0x20000000.
1414#
1415config HIGHMEM
1416 bool "High Memory Support"
1417 depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
1418
1419config SMP
1420 bool "Multi-Processing support"
1421 depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
1422 ---help---
1423 This enables support for systems with more than one CPU. If you have
1424 a system with only one CPU, like most personal computers, say N. If
1425 you have a system with more than one CPU, say Y.
1426
1427 If you say N here, the kernel will run on single and multiprocessor
1428 machines, but will use only one CPU of a multiprocessor machine. If
1429 you say Y here, the kernel will run on many, but not all,
1430 singleprocessor machines. On a singleprocessor machine, the kernel
1431 will run faster if you say N here.
1432
1433 People using multiprocessor machines who say Y here should also say
1434 Y to "Enhanced Real Time Clock Support", below.
1435
1436 See also the <file:Documentation/smp.txt> and the SMP-HOWTO
1437 available at <http://www.tldp.org/docs.html#howto>.
1438
1439 If you don't know what to do here, say N.
1440
1441config NR_CPUS
1442 int "Maximum number of CPUs (2-64)"
1443 range 2 64
1444 depends on SMP
1445 default "64" if SGI_IP27
1446 default "2"
1447 help
1448 This allows you to specify the maximum number of CPUs which this
1449 kernel will support. The maximum supported value is 32 for 32-bit
1450 kernel and 64 for 64-bit kernels; the minimum value which makes
1451 sense is 2.
1452
1453 This is purely to save memory - each supported CPU adds
1454 approximately eight kilobytes to the kernel image.
1455
1456config PREEMPT
1457 bool "Preemptible Kernel"
1458 help
1459 This option reduces the latency of the kernel when reacting to
1460 real-time or interactive events by allowing a low priority process to
1461 be preempted even if it is in kernel mode executing a system call.
1462 This allows applications to run more reliably even when the system is
1463 under load.
1464
1465config RTC_DS1742
1466 bool "DS1742 BRAM/RTC support"
1467 depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
1468
1469config MIPS_INSANE_LARGE
1470 bool "Support for large 64-bit configurations"
1471 depends on CPU_R10000 && MIPS64
1472 help
1473 MIPS R10000 does support a 44 bit / 16TB address space as opposed to
1474 previous 64-bit processors which only supported 40 bit / 1TB. If you
1475 need processes of more than 1TB virtual address space, say Y here.
1476 This will result in additional memory usage, so it is not
1477 recommended for normal users.
1478
1479config RWSEM_GENERIC_SPINLOCK
1480 bool
1481 default y
1482
1483endmenu
1484
1485menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
1486
1487config HW_HAS_PCI
1488 bool
1489
1490config PCI
1491 bool "Support for PCI controller"
1492 depends on HW_HAS_PCI
1493 help
1494 Find out whether you have a PCI motherboard. PCI is the name of a
1495 bus system, i.e. the way the CPU talks to the other stuff inside
1496 your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
1497 say Y, otherwise N.
1498
1499 The PCI-HOWTO, available from
1500 <http://www.tldp.org/docs.html#howto>, contains valuable
1501 information about which PCI hardware does work under Linux and which
1502 doesn't.
1503
1504config PCI_DOMAINS
1505 bool
1506 depends on PCI
1507
1508source "drivers/pci/Kconfig"
1509
1510#
1511# ISA support is now enabled via select. Too many systems still have the one
1512# or other ISA chip on the board that users don't know about so don't expect
1513# users to choose the right thing ...
1514#
1515config ISA
1516 bool
1517
1518config EISA
1519 bool "EISA support"
1520 depends on SGI_IP22 || SNI_RM200_PCI
1521 select ISA
1522 ---help---
1523 The Extended Industry Standard Architecture (EISA) bus was
1524 developed as an open alternative to the IBM MicroChannel bus.
1525
1526 The EISA bus provided some of the features of the IBM MicroChannel
1527 bus while maintaining backward compatibility with cards made for
1528 the older ISA bus. The EISA bus saw limited use between 1988 and
1529 1995 when it was made obsolete by the PCI bus.
1530
1531 Say Y here if you are building a kernel for an EISA-based machine.
1532
1533 Otherwise, say N.
1534
1535source "drivers/eisa/Kconfig"
1536
1537config TC
1538 bool "TURBOchannel support"
1539 depends on MACH_DECSTATION
1540 help
1541 TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
1542 processors. Documentation on writing device drivers for TurboChannel
1543 is available at:
1544 <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.
1545
1546#config ACCESSBUS
1547# bool "Access.Bus support"
1548# depends on TC
1549
1550config MMU
1551 bool
1552 default y
1553
1554config MCA
1555 bool
1556
1557config SBUS
1558 bool
1559
1560source "drivers/pcmcia/Kconfig"
1561
1562source "drivers/pci/hotplug/Kconfig"
1563
1564endmenu
1565
1566menu "Executable file formats"
1567
1568source "fs/Kconfig.binfmt"
1569
1570config TRAD_SIGNALS
1571 bool
1572 default y if MIPS32
1573
1574config BUILD_ELF64
1575 bool "Use 64-bit ELF format for building"
1576 depends on MIPS64
1577 help
1578 A 64-bit kernel is usually built using the 64-bit ELF binary object
1579 format as it's one that allows arbitrary 64-bit constructs. For
1580 kernels that are loaded within the KSEG compatibility segments the
1581 32-bit ELF format can optionally be used resulting in a somewhat
1582 smaller binary, but this option is not explicitly supported by the
1583 toolchain and since binutils 2.14 it does not even work at all.
1584
1585 Say Y to use the 64-bit format or N to use the 32-bit one.
1586
1587 If unsure say Y.
1588
1589config BINFMT_IRIX
1590 bool "Include IRIX binary compatibility"
1591 depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN
1592
1593config MIPS32_COMPAT
1594 bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
1595 depends on MIPS64
1596 help
1597 Select this option if you want Linux/MIPS 32-bit binary
1598 compatibility. Since all software available for Linux/MIPS is
1599 currently 32-bit you should say Y here.
1600
1601config COMPAT
1602 bool
1603 depends on MIPS32_COMPAT
1604 default y
1605
1606config MIPS32_O32
1607 bool "Kernel support for o32 binaries"
1608 depends on MIPS32_COMPAT
1609 help
1610 Select this option if you want to run o32 binaries. These are pure
1611 32-bit binaries as used by the 32-bit Linux/MIPS port. Most of
1612 existing binaries are in this format.
1613
1614 If unsure, say Y.
1615
1616config MIPS32_N32
1617 bool "Kernel support for n32 binaries"
1618 depends on MIPS32_COMPAT
1619 help
1620 Select this option if you want to run n32 binaries. These are
1621 64-bit binaries using 32-bit quantities for addressing and certain
1622 data that would normally be 64-bit. They are used in special
1623 cases.
1624
1625 If unsure, say N.
1626
1627config BINFMT_ELF32
1628 bool
1629 default y if MIPS32_O32 || MIPS32_N32
1630
1631config PM
1632 bool "Power Management support (EXPERIMENTAL)"
1633 depends on EXPERIMENTAL && MACH_AU1X00
1634
1635endmenu
1636
1637source "drivers/Kconfig"
1638
1639source "fs/Kconfig"
1640
1641source "arch/mips/Kconfig.debug"
1642
1643source "security/Kconfig"
1644
1645source "crypto/Kconfig"
1646
1647source "lib/Kconfig"
1648
1649#
1650# Use the generic interrupt handling code in kernel/irq/:
1651#
1652config GENERIC_HARDIRQS
1653 bool
1654 default y
1655
1656config GENERIC_IRQ_PROBE
1657 bool
1658 default y
Al Viro5cae8412005-05-04 05:39:22 +01001659
1660config ISA_DMA_API
1661 bool
1662 default y