blob: 121832e5d899906d37f0f3a6b879fb425128477c [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001Some very frequently asked questions about linuxtv-dvb
2
31. The signal seems to die a few seconds after tuning.
4
5 It's not a bug, it's a feature. Because the frontends have
6 significant power requirements (and hence get very hot), they
7 are powered down if they are unused (i.e. if the frontend device
Matt LaPlante992caac2006-10-03 22:52:05 +02008 is closed). The dvb-core.o module parameter "dvb_shutdown_timeout"
Linus Torvalds1da177e2005-04-16 15:20:36 -07009 allow you to change the timeout (default 5 seconds). Setting the
10 timeout to 0 disables the timeout feature.
11
122. How can I watch TV?
13
14 The driver distribution includes some simple utilities which
15 are mainly intended for testing and to demonstrate how the
16 DVB API works.
17
18 Depending on whether you have a DVB-S, DVB-C or DVB-T card, use
19 apps/szap/szap, czap or tzap. You must supply a channel list
20 in ~/.[sct]zap/channels.conf. If you are lucky you can just copy
21 one of the supplied channel lists, or you can create a new one
22 by running apps/scan/scan. If you run scan on an unknown network
23 you might have to supply some start data in apps/scan/initial.h.
24
25 If you have a card with a built-in hardware MPEG-decoder the
26 drivers create a video4linux device (/dev/v4l/video0) which
27 you can use to watch TV with any v4l application. xawtv is known
28 to work. Note that you cannot change channels with xawtv, you
29 have to zap using [sct]zap. If you want a nice application for
30 TV watching and record/playback, have a look at VDR.
31
32 If your card does not have a hardware MPEG decoder you need
33 a software MPEG decoder. Mplayer or xine are known to work.
34 Newsflash: MythTV also has DVB support now.
35 Note: Only very recent versions of Mplayer and xine can decode.
36 MPEG2 transport streams (TS) directly. Then, run
37 '[sct]zap channelname -r' in one xterm, and keep it running,
38 and start 'mplayer - < /dev/dvb/adapter0/dvr0' or
39 'xine stdin://mpeg2 < /dev/dvb/adapter0/dvr0' in a second xterm.
40 That's all far from perfect, but it seems no one has written
41 a nice DVB application which includes a builtin software MPEG
42 decoder yet.
43
44 Newsflash: Newest xine directly supports DVB. Just copy your
45 channels.conf to ~/.xine and start 'xine dvb://', or select
46 the DVB button in the xine GUI. Channel switching works using the
47 numpad pgup/pgdown (NP9 / NP3) keys to scroll through the channel osd
48 menu and pressing numpad-enter to switch to the selected channel.
49
50 Note: Older versions of xine and mplayer understand MPEG program
51 streams (PS) only, and can be used in conjunction with the
52 ts2ps tool from the Metzler Brother's dvb-mpegtools package.
53
543. Which other DVB applications exist?
55
56 http://www.cadsoft.de/people/kls/vdr/
57 Klaus Schmidinger's Video Disk Recorder
58
59 http://www.metzlerbros.org/dvb/
60 Metzler Bros. DVB development; alternate drivers and
61 DVB utilities, include dvb-mpegtools and tuxzap.
62
Linus Torvalds1da177e2005-04-16 15:20:36 -070063 http://sourceforge.net/projects/dvbtools/
64 Dave Chapman's dvbtools package, including
65 dvbstream and dvbtune
66
67 http://www.linuxdvb.tv/
68 Henning Holtschneider's site with many interesting
69 links and docs
70
71 http://www.dbox2.info/
72 LinuxDVB on the dBox2
73
74 http://www.tuxbox.org/
75 http://cvs.tuxbox.org/
76 the TuxBox CVS many interesting DVB applications and the dBox2
77 DVB source
78
Justin P. Mattock0ea6e612010-07-23 20:51:24 -070079 http://www.linuxtv.org/downloads/
Linus Torvalds1da177e2005-04-16 15:20:36 -070080 DVB Swiss Army Knife library and utilities
81
82 http://www.nenie.org/misc/mpsys/
83 MPSYS: a MPEG2 system library and tools
84
85 http://mplayerhq.hu/
86 mplayer
87
88 http://xine.sourceforge.net/
89 http://xinehq.de/
90 xine
91
92 http://www.mythtv.org/
93 MythTV - analog TV PVR, but now with DVB support, too
94 (with software MPEG decode)
95
96 http://dvbsnoop.sourceforge.net/
97 DVB sniffer program to monitor, analyze, debug, dump
98 or view dvb/mpeg/dsm-cc/mhp stream information (TS,
99 PES, SECTION)
100
1014. Can't get a signal tuned correctly
102
103 If you are using a Technotrend/Hauppauge DVB-C card *without* analog
104 module, you might have to use module parameter adac=-1 (dvb-ttpci.o).
105
1065. The dvb_net device doesn't give me any packets at all
107
108 Run tcpdump on the dvb0_0 interface. This sets the interface
109 into promiscous mode so it accepts any packets from the PID
110 you have configured with the dvbnet utility. Check if there
111 are any packets with the IP addr and MAC addr you have
112 configured with ifconfig.
113
114 If tcpdump doesn't give you any output, check the statistics
115 which ifconfig outputs. (Note: If the MAC address is wrong,
116 dvb_net won't get any input; thus you have to run tcpdump
117 before checking the statistics.) If there are no packets at
118 all then maybe the PID is wrong. If there are error packets,
119 then either the PID is wrong or the stream does not conform to
120 the MPE standard (EN 301 192, http://www.etsi.org/). You can
121 use e.g. dvbsnoop for debugging.
122
1236. The dvb_net device doesn't give me any multicast packets
124
125 Check your routes if they include the multicast address range.
126 Additionally make sure that "source validation by reversed path
127 lookup" is disabled:
128 $ "echo 0 > /proc/sys/net/ipv4/conf/dvb0/rp_filter"
129
1307. What the hell are all those modules that need to be loaded?
131
132 For a dvb-ttpci av7110 based full-featured card the following
133 modules are loaded:
134
135 - videodev: Video4Linux core module. This is the base module that
136 gives you access to the "analog" tv picture of the av7110 mpeg2
137 decoder.
138
139 - v4l2-common: common functions for Video4Linux-2 drivers
140
Matt LaPlante6c28f2c2006-10-03 22:46:31 +0200141 - v4l1-compat: backward compatibility layer for Video4Linux-1 legacy
Linus Torvalds1da177e2005-04-16 15:20:36 -0700142 applications
143
144 - dvb-core: DVB core module. This provides you with the
145 /dev/dvb/adapter entries
146
147 - saa7146: SAA7146 core driver. This is need to access any SAA7146
148 based card in your system.
149
150 - saa7146_vv: SAA7146 video and vbi functions. These are only needed
151 for full-featured cards.
152
Mauro Carvalho Chehabc1accaa2007-08-23 16:37:49 -0300153 - videobuf-dma-sg: capture helper module for the saa7146_vv driver. This
Linus Torvalds1da177e2005-04-16 15:20:36 -0700154 one is responsible to handle capture buffers.
155
Matt LaPlantea2ffd272006-10-03 22:49:15 +0200156 - dvb-ttpci: The main driver for AV7110 based, full-featured
Linus Torvalds1da177e2005-04-16 15:20:36 -0700157 DVB-S/C/T cards
158
159eof