blob: 7cf9913a47b26ca4e3adb02a25e2538542913463 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
Uwe Zeisbergerf30c2262006-10-03 23:01:26 +02002 * sound/oss/ad1848.c
Linus Torvalds1da177e2005-04-16 15:20:36 -07003 *
4 * The low level driver for the AD1848/CS4248 codec chip which
5 * is used for example in the MS Sound System.
6 *
7 * The CS4231 which is used in the GUS MAX and some other cards is
8 * upwards compatible with AD1848 and this driver is able to drive it.
9 *
10 * CS4231A and AD1845 are upward compatible with CS4231. However
11 * the new features of these chips are different.
12 *
13 * CS4232 is a PnP audio chip which contains a CS4231A (and SB, MPU).
14 * CS4232A is an improved version of CS4232.
15 *
16 *
17 *
18 * Copyright (C) by Hannu Savolainen 1993-1997
19 *
20 * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
21 * Version 2 (June 1991). See the "COPYING" file distributed with this software
22 * for more info.
23 *
24 *
25 * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed)
26 * general sleep/wakeup clean up.
27 * Alan Cox : reformatted. Fixed SMP bugs. Moved to kernel alloc/free
28 * of irqs. Use dev_id.
29 * Christoph Hellwig : adapted to module_init/module_exit
30 * Aki Laukkanen : added power management support
31 * Arnaldo C. de Melo : added missing restore_flags in ad1848_resume
32 * Miguel Freitas : added ISA PnP support
33 * Alan Cox : Added CS4236->4239 identification
34 * Daniel T. Cobra : Alernate config/mixer for later chips
35 * Alan Cox : Merged chip idents and config code
36 *
37 * TODO
38 * APM save restore assist code on IBM thinkpad
39 *
40 * Status:
41 * Tested. Believed fully functional.
42 */
43
Linus Torvalds1da177e2005-04-16 15:20:36 -070044#include <linux/init.h>
45#include <linux/interrupt.h>
46#include <linux/module.h>
47#include <linux/stddef.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070048#include <linux/isapnp.h>
49#include <linux/pnp.h>
50#include <linux/spinlock.h>
51
52#define DEB(x)
53#define DEB1(x)
54#include "sound_config.h"
55
56#include "ad1848.h"
57#include "ad1848_mixer.h"
58
59typedef struct
60{
61 spinlock_t lock;
62 int base;
63 int irq;
64 int dma1, dma2;
65 int dual_dma; /* 1, when two DMA channels allocated */
66 int subtype;
67 unsigned char MCE_bit;
68 unsigned char saved_regs[64]; /* Includes extended register space */
69 int debug_flag;
70
71 int audio_flags;
72 int record_dev, playback_dev;
73
74 int xfer_count;
75 int audio_mode;
76 int open_mode;
77 int intr_active;
78 char *chip_name, *name;
79 int model;
80#define MD_1848 1
81#define MD_4231 2
82#define MD_4231A 3
83#define MD_1845 4
84#define MD_4232 5
85#define MD_C930 6
86#define MD_IWAVE 7
87#define MD_4235 8 /* Crystal Audio CS4235 */
88#define MD_1845_SSCAPE 9 /* Ensoniq Soundscape PNP*/
89#define MD_4236 10 /* 4236 and higher */
90#define MD_42xB 11 /* CS 42xB */
91#define MD_4239 12 /* CS4239 */
92
93 /* Mixer parameters */
94 int recmask;
95 int supported_devices, orig_devices;
96 int supported_rec_devices, orig_rec_devices;
97 int *levels;
98 short mixer_reroute[32];
99 int dev_no;
100 volatile unsigned long timer_ticks;
101 int timer_running;
102 int irq_ok;
103 mixer_ents *mix_devices;
104 int mixer_output_port;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700105} ad1848_info;
106
107typedef struct ad1848_port_info
108{
109 int open_mode;
110 int speed;
111 unsigned char speed_bits;
112 int channels;
113 int audio_format;
114 unsigned char format_bits;
115}
116ad1848_port_info;
117
118static struct address_info cfg;
119static int nr_ad1848_devs;
120
121static int deskpro_xl;
122static int deskpro_m;
123static int soundpro;
124
125static volatile signed char irq2dev[17] = {
126 -1, -1, -1, -1, -1, -1, -1, -1,
127 -1, -1, -1, -1, -1, -1, -1, -1, -1
128};
129
130#ifndef EXCLUDE_TIMERS
131static int timer_installed = -1;
132#endif
133
134static int loaded;
135
136static int ad_format_mask[13 /*devc->model */ ] =
137{
138 0,
139 AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW,
140 AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
141 AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
142 AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW, /* AD1845 */
143 AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
144 AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
145 AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
146 AFMT_U8 | AFMT_S16_LE /* CS4235 */,
147 AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW /* Ensoniq Soundscape*/,
148 AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
149 AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM,
150 AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | AFMT_S16_BE | AFMT_IMA_ADPCM
151};
152
153static ad1848_info adev_info[MAX_AUDIO_DEV];
154
155#define io_Index_Addr(d) ((d)->base)
156#define io_Indexed_Data(d) ((d)->base+1)
157#define io_Status(d) ((d)->base+2)
158#define io_Polled_IO(d) ((d)->base+3)
159
160static struct {
161 unsigned char flags;
162#define CAP_F_TIMER 0x01
163} capabilities [10 /*devc->model */ ] = {
164 {0}
165 ,{0} /* MD_1848 */
166 ,{CAP_F_TIMER} /* MD_4231 */
167 ,{CAP_F_TIMER} /* MD_4231A */
168 ,{CAP_F_TIMER} /* MD_1845 */
169 ,{CAP_F_TIMER} /* MD_4232 */
170 ,{0} /* MD_C930 */
171 ,{CAP_F_TIMER} /* MD_IWAVE */
172 ,{0} /* MD_4235 */
173 ,{CAP_F_TIMER} /* MD_1845_SSCAPE */
174};
175
176#ifdef CONFIG_PNP
177static int isapnp = 1;
178static int isapnpjump;
179static int reverse;
180
181static int audio_activated;
182#else
183static int isapnp;
184#endif
185
186
187
188static int ad1848_open(int dev, int mode);
189static void ad1848_close(int dev);
190static void ad1848_output_block(int dev, unsigned long buf, int count, int intrflag);
191static void ad1848_start_input(int dev, unsigned long buf, int count, int intrflag);
192static int ad1848_prepare_for_output(int dev, int bsize, int bcount);
193static int ad1848_prepare_for_input(int dev, int bsize, int bcount);
194static void ad1848_halt(int dev);
195static void ad1848_halt_input(int dev);
196static void ad1848_halt_output(int dev);
197static void ad1848_trigger(int dev, int bits);
David Howells7d12e782006-10-05 14:55:46 +0100198static irqreturn_t adintr(int irq, void *dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700199
200#ifndef EXCLUDE_TIMERS
201static int ad1848_tmr_install(int dev);
202static void ad1848_tmr_reprogram(int dev);
203#endif
204
205static int ad_read(ad1848_info * devc, int reg)
206{
207 int x;
208 int timeout = 900000;
209
210 while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */
211 timeout--;
212
213 if(reg < 32)
214 {
215 outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
216 x = inb(io_Indexed_Data(devc));
217 }
218 else
219 {
220 int xreg, xra;
221
222 xreg = (reg & 0xff) - 32;
223 xra = (((xreg & 0x0f) << 4) & 0xf0) | 0x08 | ((xreg & 0x10) >> 2);
224 outb(((unsigned char) (23 & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
225 outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc));
226 x = inb(io_Indexed_Data(devc));
227 }
228
229 return x;
230}
231
232static void ad_write(ad1848_info * devc, int reg, int data)
233{
234 int timeout = 900000;
235
236 while (timeout > 0 && inb(devc->base) == 0x80) /* Are we initializing */
237 timeout--;
238
239 if(reg < 32)
240 {
241 outb(((unsigned char) (reg & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
242 outb(((unsigned char) (data & 0xff)), io_Indexed_Data(devc));
243 }
244 else
245 {
246 int xreg, xra;
247
248 xreg = (reg & 0xff) - 32;
249 xra = (((xreg & 0x0f) << 4) & 0xf0) | 0x08 | ((xreg & 0x10) >> 2);
250 outb(((unsigned char) (23 & 0xff) | devc->MCE_bit), io_Index_Addr(devc));
251 outb(((unsigned char) (xra & 0xff)), io_Indexed_Data(devc));
252 outb((unsigned char) (data & 0xff), io_Indexed_Data(devc));
253 }
254}
255
256static void wait_for_calibration(ad1848_info * devc)
257{
258 int timeout = 0;
259
260 /*
261 * Wait until the auto calibration process has finished.
262 *
263 * 1) Wait until the chip becomes ready (reads don't return 0x80).
264 * 2) Wait until the ACI bit of I11 gets on and then off.
265 */
266
267 timeout = 100000;
268 while (timeout > 0 && inb(devc->base) == 0x80)
269 timeout--;
270 if (inb(devc->base) & 0x80)
271 printk(KERN_WARNING "ad1848: Auto calibration timed out(1).\n");
272
273 timeout = 100;
274 while (timeout > 0 && !(ad_read(devc, 11) & 0x20))
275 timeout--;
276 if (!(ad_read(devc, 11) & 0x20))
277 return;
278
279 timeout = 80000;
280 while (timeout > 0 && (ad_read(devc, 11) & 0x20))
281 timeout--;
282 if (ad_read(devc, 11) & 0x20)
283 if ( (devc->model != MD_1845) || (devc->model != MD_1845_SSCAPE))
284 printk(KERN_WARNING "ad1848: Auto calibration timed out(3).\n");
285}
286
287static void ad_mute(ad1848_info * devc)
288{
289 int i;
290 unsigned char prev;
291
292 /*
293 * Save old register settings and mute output channels
294 */
295
296 for (i = 6; i < 8; i++)
297 {
298 prev = devc->saved_regs[i] = ad_read(devc, i);
299 }
300
301}
302
303static void ad_unmute(ad1848_info * devc)
304{
305}
306
307static void ad_enter_MCE(ad1848_info * devc)
308{
309 int timeout = 1000;
310 unsigned short prev;
311
312 while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */
313 timeout--;
314
315 devc->MCE_bit = 0x40;
316 prev = inb(io_Index_Addr(devc));
317 if (prev & 0x40)
318 {
319 return;
320 }
321 outb((devc->MCE_bit), io_Index_Addr(devc));
322}
323
324static void ad_leave_MCE(ad1848_info * devc)
325{
326 unsigned char prev, acal;
327 int timeout = 1000;
328
329 while (timeout > 0 && inb(devc->base) == 0x80) /*Are we initializing */
330 timeout--;
331
332 acal = ad_read(devc, 9);
333
334 devc->MCE_bit = 0x00;
335 prev = inb(io_Index_Addr(devc));
336 outb((0x00), io_Index_Addr(devc)); /* Clear the MCE bit */
337
338 if ((prev & 0x40) == 0) /* Not in MCE mode */
339 {
340 return;
341 }
342 outb((0x00), io_Index_Addr(devc)); /* Clear the MCE bit */
343 if (acal & 0x08) /* Auto calibration is enabled */
344 wait_for_calibration(devc);
345}
346
347static int ad1848_set_recmask(ad1848_info * devc, int mask)
348{
349 unsigned char recdev;
350 int i, n;
351 unsigned long flags;
352
353 mask &= devc->supported_rec_devices;
354
355 /* Rename the mixer bits if necessary */
356 for (i = 0; i < 32; i++)
357 {
358 if (devc->mixer_reroute[i] != i)
359 {
360 if (mask & (1 << i))
361 {
362 mask &= ~(1 << i);
363 mask |= (1 << devc->mixer_reroute[i]);
364 }
365 }
366 }
367
368 n = 0;
369 for (i = 0; i < 32; i++) /* Count selected device bits */
370 if (mask & (1 << i))
371 n++;
372
373 spin_lock_irqsave(&devc->lock,flags);
374 if (!soundpro) {
375 if (n == 0)
376 mask = SOUND_MASK_MIC;
377 else if (n != 1) { /* Too many devices selected */
378 mask &= ~devc->recmask; /* Filter out active settings */
379
380 n = 0;
381 for (i = 0; i < 32; i++) /* Count selected device bits */
382 if (mask & (1 << i))
383 n++;
384
385 if (n != 1)
386 mask = SOUND_MASK_MIC;
387 }
388 switch (mask) {
389 case SOUND_MASK_MIC:
390 recdev = 2;
391 break;
392
393 case SOUND_MASK_LINE:
394 case SOUND_MASK_LINE3:
395 recdev = 0;
396 break;
397
398 case SOUND_MASK_CD:
399 case SOUND_MASK_LINE1:
400 recdev = 1;
401 break;
402
403 case SOUND_MASK_IMIX:
404 recdev = 3;
405 break;
406
407 default:
408 mask = SOUND_MASK_MIC;
409 recdev = 2;
410 }
411
412 recdev <<= 6;
413 ad_write(devc, 0, (ad_read(devc, 0) & 0x3f) | recdev);
414 ad_write(devc, 1, (ad_read(devc, 1) & 0x3f) | recdev);
415 } else { /* soundpro */
416 unsigned char val;
417 int set_rec_bit;
418 int j;
419
420 for (i = 0; i < 32; i++) { /* For each bit */
421 if ((devc->supported_rec_devices & (1 << i)) == 0)
422 continue; /* Device not supported */
423
424 for (j = LEFT_CHN; j <= RIGHT_CHN; j++) {
425 if (devc->mix_devices[i][j].nbits == 0) /* Inexistent channel */
426 continue;
427
428 /*
429 * This is tricky:
430 * set_rec_bit becomes 1 if the corresponding bit in mask is set
431 * then it gets flipped if the polarity is inverse
432 */
433 set_rec_bit = ((mask & (1 << i)) != 0) ^ devc->mix_devices[i][j].recpol;
434
435 val = ad_read(devc, devc->mix_devices[i][j].recreg);
436 val &= ~(1 << devc->mix_devices[i][j].recpos);
437 val |= (set_rec_bit << devc->mix_devices[i][j].recpos);
438 ad_write(devc, devc->mix_devices[i][j].recreg, val);
439 }
440 }
441 }
442 spin_unlock_irqrestore(&devc->lock,flags);
443
444 /* Rename the mixer bits back if necessary */
445 for (i = 0; i < 32; i++)
446 {
447 if (devc->mixer_reroute[i] != i)
448 {
449 if (mask & (1 << devc->mixer_reroute[i]))
450 {
451 mask &= ~(1 << devc->mixer_reroute[i]);
452 mask |= (1 << i);
453 }
454 }
455 }
456 devc->recmask = mask;
457 return mask;
458}
459
460static void change_bits(ad1848_info * devc, unsigned char *regval,
461 unsigned char *muteval, int dev, int chn, int newval)
462{
463 unsigned char mask;
464 int shift;
465 int mute;
466 int mutemask;
467 int set_mute_bit;
468
469 set_mute_bit = (newval == 0) ^ devc->mix_devices[dev][chn].mutepol;
470
471 if (devc->mix_devices[dev][chn].polarity == 1) /* Reverse */
472 newval = 100 - newval;
473
474 mask = (1 << devc->mix_devices[dev][chn].nbits) - 1;
475 shift = devc->mix_devices[dev][chn].bitpos;
476
477 if (devc->mix_devices[dev][chn].mutepos == 8)
478 { /* if there is no mute bit */
479 mute = 0; /* No mute bit; do nothing special */
480 mutemask = ~0; /* No mute bit; do nothing special */
481 }
482 else
483 {
484 mute = (set_mute_bit << devc->mix_devices[dev][chn].mutepos);
485 mutemask = ~(1 << devc->mix_devices[dev][chn].mutepos);
486 }
487
488 newval = (int) ((newval * mask) + 50) / 100; /* Scale it */
489 *regval &= ~(mask << shift); /* Clear bits */
490 *regval |= (newval & mask) << shift; /* Set new value */
491
492 *muteval &= mutemask;
493 *muteval |= mute;
494}
495
496static int ad1848_mixer_get(ad1848_info * devc, int dev)
497{
498 if (!((1 << dev) & devc->supported_devices))
499 return -EINVAL;
500
501 dev = devc->mixer_reroute[dev];
502
503 return devc->levels[dev];
504}
505
506static void ad1848_mixer_set_channel(ad1848_info *devc, int dev, int value, int channel)
507{
508 int regoffs, muteregoffs;
509 unsigned char val, muteval;
510 unsigned long flags;
511
512 regoffs = devc->mix_devices[dev][channel].regno;
513 muteregoffs = devc->mix_devices[dev][channel].mutereg;
514 val = ad_read(devc, regoffs);
515
516 if (muteregoffs != regoffs) {
517 muteval = ad_read(devc, muteregoffs);
518 change_bits(devc, &val, &muteval, dev, channel, value);
519 }
520 else
521 change_bits(devc, &val, &val, dev, channel, value);
522
523 spin_lock_irqsave(&devc->lock,flags);
524 ad_write(devc, regoffs, val);
525 devc->saved_regs[regoffs] = val;
526 if (muteregoffs != regoffs) {
527 ad_write(devc, muteregoffs, muteval);
528 devc->saved_regs[muteregoffs] = muteval;
529 }
530 spin_unlock_irqrestore(&devc->lock,flags);
531}
532
533static int ad1848_mixer_set(ad1848_info * devc, int dev, int value)
534{
535 int left = value & 0x000000ff;
536 int right = (value & 0x0000ff00) >> 8;
537 int retvol;
538
539 if (dev > 31)
540 return -EINVAL;
541
542 if (!(devc->supported_devices & (1 << dev)))
543 return -EINVAL;
544
545 dev = devc->mixer_reroute[dev];
546
547 if (devc->mix_devices[dev][LEFT_CHN].nbits == 0)
548 return -EINVAL;
549
550 if (left > 100)
551 left = 100;
552 if (right > 100)
553 right = 100;
554
555 if (devc->mix_devices[dev][RIGHT_CHN].nbits == 0) /* Mono control */
556 right = left;
557
558 retvol = left | (right << 8);
559
560 /* Scale volumes */
561 left = mix_cvt[left];
562 right = mix_cvt[right];
563
564 devc->levels[dev] = retvol;
565
566 /*
567 * Set the left channel
568 */
569 ad1848_mixer_set_channel(devc, dev, left, LEFT_CHN);
570
571 /*
572 * Set the right channel
573 */
574 if (devc->mix_devices[dev][RIGHT_CHN].nbits == 0)
575 goto out;
576 ad1848_mixer_set_channel(devc, dev, right, RIGHT_CHN);
577
578 out:
579 return retvol;
580}
581
582static void ad1848_mixer_reset(ad1848_info * devc)
583{
584 int i;
585 char name[32];
586 unsigned long flags;
587
588 devc->mix_devices = &(ad1848_mix_devices[0]);
589
590 sprintf(name, "%s_%d", devc->chip_name, nr_ad1848_devs);
591
592 for (i = 0; i < 32; i++)
593 devc->mixer_reroute[i] = i;
594
595 devc->supported_rec_devices = MODE1_REC_DEVICES;
596
597 switch (devc->model)
598 {
599 case MD_4231:
600 case MD_4231A:
601 case MD_1845:
602 case MD_1845_SSCAPE:
603 devc->supported_devices = MODE2_MIXER_DEVICES;
604 break;
605
606 case MD_C930:
607 devc->supported_devices = C930_MIXER_DEVICES;
608 devc->mix_devices = &(c930_mix_devices[0]);
609 break;
610
611 case MD_IWAVE:
612 devc->supported_devices = MODE3_MIXER_DEVICES;
613 devc->mix_devices = &(iwave_mix_devices[0]);
614 break;
615
616 case MD_42xB:
617 case MD_4239:
618 devc->mix_devices = &(cs42xb_mix_devices[0]);
619 devc->supported_devices = MODE3_MIXER_DEVICES;
620 break;
621 case MD_4232:
622 case MD_4235:
623 case MD_4236:
624 devc->supported_devices = MODE3_MIXER_DEVICES;
625 break;
626
627 case MD_1848:
628 if (soundpro) {
629 devc->supported_devices = SPRO_MIXER_DEVICES;
630 devc->supported_rec_devices = SPRO_REC_DEVICES;
631 devc->mix_devices = &(spro_mix_devices[0]);
632 break;
633 }
634
635 default:
636 devc->supported_devices = MODE1_MIXER_DEVICES;
637 }
638
639 devc->orig_devices = devc->supported_devices;
640 devc->orig_rec_devices = devc->supported_rec_devices;
641
642 devc->levels = load_mixer_volumes(name, default_mixer_levels, 1);
643
644 for (i = 0; i < SOUND_MIXER_NRDEVICES; i++)
645 {
646 if (devc->supported_devices & (1 << i))
647 ad1848_mixer_set(devc, i, devc->levels[i]);
648 }
649
650 ad1848_set_recmask(devc, SOUND_MASK_MIC);
651
652 devc->mixer_output_port = devc->levels[31] | AUDIO_HEADPHONE | AUDIO_LINE_OUT;
653
654 spin_lock_irqsave(&devc->lock,flags);
655 if (!soundpro) {
656 if (devc->mixer_output_port & AUDIO_SPEAKER)
657 ad_write(devc, 26, ad_read(devc, 26) & ~0x40); /* Unmute mono out */
658 else
659 ad_write(devc, 26, ad_read(devc, 26) | 0x40); /* Mute mono out */
660 } else {
661 /*
662 * From the "wouldn't it be nice if the mixer API had (better)
663 * support for custom stuff" category
664 */
665 /* Enable surround mode and SB16 mixer */
666 ad_write(devc, 16, 0x60);
667 }
668 spin_unlock_irqrestore(&devc->lock,flags);
669}
670
671static int ad1848_mixer_ioctl(int dev, unsigned int cmd, void __user *arg)
672{
673 ad1848_info *devc = mixer_devs[dev]->devc;
674 int val;
675
676 if (cmd == SOUND_MIXER_PRIVATE1)
677 {
678 if (get_user(val, (int __user *)arg))
679 return -EFAULT;
680
681 if (val != 0xffff)
682 {
683 unsigned long flags;
684 val &= (AUDIO_SPEAKER | AUDIO_HEADPHONE | AUDIO_LINE_OUT);
685 devc->mixer_output_port = val;
686 val |= AUDIO_HEADPHONE | AUDIO_LINE_OUT; /* Always on */
687 devc->mixer_output_port = val;
688 spin_lock_irqsave(&devc->lock,flags);
689 if (val & AUDIO_SPEAKER)
690 ad_write(devc, 26, ad_read(devc, 26) & ~0x40); /* Unmute mono out */
691 else
692 ad_write(devc, 26, ad_read(devc, 26) | 0x40); /* Mute mono out */
693 spin_unlock_irqrestore(&devc->lock,flags);
694 }
695 val = devc->mixer_output_port;
696 return put_user(val, (int __user *)arg);
697 }
698 if (cmd == SOUND_MIXER_PRIVATE2)
699 {
700 if (get_user(val, (int __user *)arg))
701 return -EFAULT;
702 return(ad1848_control(AD1848_MIXER_REROUTE, val));
703 }
704 if (((cmd >> 8) & 0xff) == 'M')
705 {
706 if (_SIOC_DIR(cmd) & _SIOC_WRITE)
707 {
708 switch (cmd & 0xff)
709 {
710 case SOUND_MIXER_RECSRC:
711 if (get_user(val, (int __user *)arg))
712 return -EFAULT;
713 val = ad1848_set_recmask(devc, val);
714 break;
715
716 default:
717 if (get_user(val, (int __user *)arg))
718 return -EFAULT;
719 val = ad1848_mixer_set(devc, cmd & 0xff, val);
720 break;
721 }
722 return put_user(val, (int __user *)arg);
723 }
724 else
725 {
726 switch (cmd & 0xff)
727 {
728 /*
729 * Return parameters
730 */
731
732 case SOUND_MIXER_RECSRC:
733 val = devc->recmask;
734 break;
735
736 case SOUND_MIXER_DEVMASK:
737 val = devc->supported_devices;
738 break;
739
740 case SOUND_MIXER_STEREODEVS:
741 val = devc->supported_devices;
742 if (devc->model != MD_C930)
743 val &= ~(SOUND_MASK_SPEAKER | SOUND_MASK_IMIX);
744 break;
745
746 case SOUND_MIXER_RECMASK:
747 val = devc->supported_rec_devices;
748 break;
749
750 case SOUND_MIXER_CAPS:
751 val=SOUND_CAP_EXCL_INPUT;
752 break;
753
754 default:
755 val = ad1848_mixer_get(devc, cmd & 0xff);
756 break;
757 }
758 return put_user(val, (int __user *)arg);
759 }
760 }
761 else
762 return -EINVAL;
763}
764
765static int ad1848_set_speed(int dev, int arg)
766{
767 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
768 ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
769
770 /*
771 * The sampling speed is encoded in the least significant nibble of I8. The
772 * LSB selects the clock source (0=24.576 MHz, 1=16.9344 MHz) and other
773 * three bits select the divisor (indirectly):
774 *
775 * The available speeds are in the following table. Keep the speeds in
776 * the increasing order.
777 */
778 typedef struct
779 {
780 int speed;
781 unsigned char bits;
782 }
783 speed_struct;
784
785 static speed_struct speed_table[] =
786 {
787 {5510, (0 << 1) | 1},
788 {5510, (0 << 1) | 1},
789 {6620, (7 << 1) | 1},
790 {8000, (0 << 1) | 0},
791 {9600, (7 << 1) | 0},
792 {11025, (1 << 1) | 1},
793 {16000, (1 << 1) | 0},
794 {18900, (2 << 1) | 1},
795 {22050, (3 << 1) | 1},
796 {27420, (2 << 1) | 0},
797 {32000, (3 << 1) | 0},
798 {33075, (6 << 1) | 1},
799 {37800, (4 << 1) | 1},
800 {44100, (5 << 1) | 1},
801 {48000, (6 << 1) | 0}
802 };
803
804 int i, n, selected = -1;
805
806 n = sizeof(speed_table) / sizeof(speed_struct);
807
808 if (arg <= 0)
809 return portc->speed;
810
811 if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) /* AD1845 has different timer than others */
812 {
813 if (arg < 4000)
814 arg = 4000;
815 if (arg > 50000)
816 arg = 50000;
817
818 portc->speed = arg;
819 portc->speed_bits = speed_table[3].bits;
820 return portc->speed;
821 }
822 if (arg < speed_table[0].speed)
823 selected = 0;
824 if (arg > speed_table[n - 1].speed)
825 selected = n - 1;
826
827 for (i = 1 /*really */ ; selected == -1 && i < n; i++)
828 {
829 if (speed_table[i].speed == arg)
830 selected = i;
831 else if (speed_table[i].speed > arg)
832 {
833 int diff1, diff2;
834
835 diff1 = arg - speed_table[i - 1].speed;
836 diff2 = speed_table[i].speed - arg;
837
838 if (diff1 < diff2)
839 selected = i - 1;
840 else
841 selected = i;
842 }
843 }
844 if (selected == -1)
845 {
846 printk(KERN_WARNING "ad1848: Can't find speed???\n");
847 selected = 3;
848 }
849 portc->speed = speed_table[selected].speed;
850 portc->speed_bits = speed_table[selected].bits;
851 return portc->speed;
852}
853
854static short ad1848_set_channels(int dev, short arg)
855{
856 ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
857
858 if (arg != 1 && arg != 2)
859 return portc->channels;
860
861 portc->channels = arg;
862 return arg;
863}
864
865static unsigned int ad1848_set_bits(int dev, unsigned int arg)
866{
867 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
868 ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
869
870 static struct format_tbl
871 {
872 int format;
873 unsigned char bits;
874 }
875 format2bits[] =
876 {
877 {
878 0, 0
879 }
880 ,
881 {
882 AFMT_MU_LAW, 1
883 }
884 ,
885 {
886 AFMT_A_LAW, 3
887 }
888 ,
889 {
890 AFMT_IMA_ADPCM, 5
891 }
892 ,
893 {
894 AFMT_U8, 0
895 }
896 ,
897 {
898 AFMT_S16_LE, 2
899 }
900 ,
901 {
902 AFMT_S16_BE, 6
903 }
904 ,
905 {
906 AFMT_S8, 0
907 }
908 ,
909 {
910 AFMT_U16_LE, 0
911 }
912 ,
913 {
914 AFMT_U16_BE, 0
915 }
916 };
917 int i, n = sizeof(format2bits) / sizeof(struct format_tbl);
918
919 if (arg == 0)
920 return portc->audio_format;
921
922 if (!(arg & ad_format_mask[devc->model]))
923 arg = AFMT_U8;
924
925 portc->audio_format = arg;
926
927 for (i = 0; i < n; i++)
928 if (format2bits[i].format == arg)
929 {
930 if ((portc->format_bits = format2bits[i].bits) == 0)
931 return portc->audio_format = AFMT_U8; /* Was not supported */
932
933 return arg;
934 }
935 /* Still hanging here. Something must be terribly wrong */
936 portc->format_bits = 0;
937 return portc->audio_format = AFMT_U8;
938}
939
940static struct audio_driver ad1848_audio_driver =
941{
942 .owner = THIS_MODULE,
943 .open = ad1848_open,
944 .close = ad1848_close,
945 .output_block = ad1848_output_block,
946 .start_input = ad1848_start_input,
947 .prepare_for_input = ad1848_prepare_for_input,
948 .prepare_for_output = ad1848_prepare_for_output,
949 .halt_io = ad1848_halt,
950 .halt_input = ad1848_halt_input,
951 .halt_output = ad1848_halt_output,
952 .trigger = ad1848_trigger,
953 .set_speed = ad1848_set_speed,
954 .set_bits = ad1848_set_bits,
955 .set_channels = ad1848_set_channels
956};
957
958static struct mixer_operations ad1848_mixer_operations =
959{
960 .owner = THIS_MODULE,
961 .id = "SOUNDPORT",
962 .name = "AD1848/CS4248/CS4231",
963 .ioctl = ad1848_mixer_ioctl
964};
965
966static int ad1848_open(int dev, int mode)
967{
968 ad1848_info *devc;
969 ad1848_port_info *portc;
970 unsigned long flags;
971
972 if (dev < 0 || dev >= num_audiodevs)
973 return -ENXIO;
974
975 devc = (ad1848_info *) audio_devs[dev]->devc;
976 portc = (ad1848_port_info *) audio_devs[dev]->portc;
977
978 /* here we don't have to protect against intr */
979 spin_lock(&devc->lock);
980 if (portc->open_mode || (devc->open_mode & mode))
981 {
982 spin_unlock(&devc->lock);
983 return -EBUSY;
984 }
985 devc->dual_dma = 0;
986
987 if (audio_devs[dev]->flags & DMA_DUPLEX)
988 {
989 devc->dual_dma = 1;
990 }
991 devc->intr_active = 0;
992 devc->audio_mode = 0;
993 devc->open_mode |= mode;
994 portc->open_mode = mode;
995 spin_unlock(&devc->lock);
996 ad1848_trigger(dev, 0);
997
998 if (mode & OPEN_READ)
999 devc->record_dev = dev;
1000 if (mode & OPEN_WRITE)
1001 devc->playback_dev = dev;
1002/*
1003 * Mute output until the playback really starts. This decreases clicking (hope so).
1004 */
1005 spin_lock_irqsave(&devc->lock,flags);
1006 ad_mute(devc);
1007 spin_unlock_irqrestore(&devc->lock,flags);
1008
1009 return 0;
1010}
1011
1012static void ad1848_close(int dev)
1013{
1014 unsigned long flags;
1015 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1016 ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1017
1018 DEB(printk("ad1848_close(void)\n"));
1019
1020 devc->intr_active = 0;
1021 ad1848_halt(dev);
1022
1023 spin_lock_irqsave(&devc->lock,flags);
1024
1025 devc->audio_mode = 0;
1026 devc->open_mode &= ~portc->open_mode;
1027 portc->open_mode = 0;
1028
1029 ad_unmute(devc);
1030 spin_unlock_irqrestore(&devc->lock,flags);
1031}
1032
1033static void ad1848_output_block(int dev, unsigned long buf, int count, int intrflag)
1034{
1035 unsigned long flags, cnt;
1036 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1037 ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1038
1039 cnt = count;
1040
1041 if (portc->audio_format == AFMT_IMA_ADPCM)
1042 {
1043 cnt /= 4;
1044 }
1045 else
1046 {
1047 if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE)) /* 16 bit data */
1048 cnt >>= 1;
1049 }
1050 if (portc->channels > 1)
1051 cnt >>= 1;
1052 cnt--;
1053
1054 if ((devc->audio_mode & PCM_ENABLE_OUTPUT) && (audio_devs[dev]->flags & DMA_AUTOMODE) &&
1055 intrflag &&
1056 cnt == devc->xfer_count)
1057 {
1058 devc->audio_mode |= PCM_ENABLE_OUTPUT;
1059 devc->intr_active = 1;
1060 return; /*
1061 * Auto DMA mode on. No need to react
1062 */
1063 }
1064 spin_lock_irqsave(&devc->lock,flags);
1065
1066 ad_write(devc, 15, (unsigned char) (cnt & 0xff));
1067 ad_write(devc, 14, (unsigned char) ((cnt >> 8) & 0xff));
1068
1069 devc->xfer_count = cnt;
1070 devc->audio_mode |= PCM_ENABLE_OUTPUT;
1071 devc->intr_active = 1;
1072 spin_unlock_irqrestore(&devc->lock,flags);
1073}
1074
1075static void ad1848_start_input(int dev, unsigned long buf, int count, int intrflag)
1076{
1077 unsigned long flags, cnt;
1078 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1079 ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1080
1081 cnt = count;
1082 if (portc->audio_format == AFMT_IMA_ADPCM)
1083 {
1084 cnt /= 4;
1085 }
1086 else
1087 {
1088 if (portc->audio_format & (AFMT_S16_LE | AFMT_S16_BE)) /* 16 bit data */
1089 cnt >>= 1;
1090 }
1091 if (portc->channels > 1)
1092 cnt >>= 1;
1093 cnt--;
1094
1095 if ((devc->audio_mode & PCM_ENABLE_INPUT) && (audio_devs[dev]->flags & DMA_AUTOMODE) &&
1096 intrflag &&
1097 cnt == devc->xfer_count)
1098 {
1099 devc->audio_mode |= PCM_ENABLE_INPUT;
1100 devc->intr_active = 1;
1101 return; /*
1102 * Auto DMA mode on. No need to react
1103 */
1104 }
1105 spin_lock_irqsave(&devc->lock,flags);
1106
1107 if (devc->model == MD_1848)
1108 {
1109 ad_write(devc, 15, (unsigned char) (cnt & 0xff));
1110 ad_write(devc, 14, (unsigned char) ((cnt >> 8) & 0xff));
1111 }
1112 else
1113 {
1114 ad_write(devc, 31, (unsigned char) (cnt & 0xff));
1115 ad_write(devc, 30, (unsigned char) ((cnt >> 8) & 0xff));
1116 }
1117
1118 ad_unmute(devc);
1119
1120 devc->xfer_count = cnt;
1121 devc->audio_mode |= PCM_ENABLE_INPUT;
1122 devc->intr_active = 1;
1123 spin_unlock_irqrestore(&devc->lock,flags);
1124}
1125
1126static int ad1848_prepare_for_output(int dev, int bsize, int bcount)
1127{
1128 int timeout;
1129 unsigned char fs, old_fs, tmp = 0;
1130 unsigned long flags;
1131 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1132 ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1133
1134 ad_mute(devc);
1135
1136 spin_lock_irqsave(&devc->lock,flags);
1137 fs = portc->speed_bits | (portc->format_bits << 5);
1138
1139 if (portc->channels > 1)
1140 fs |= 0x10;
1141
1142 ad_enter_MCE(devc); /* Enables changes to the format select reg */
1143
1144 if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE) /* Use alternate speed select registers */
1145 {
1146 fs &= 0xf0; /* Mask off the rate select bits */
1147
1148 ad_write(devc, 22, (portc->speed >> 8) & 0xff); /* Speed MSB */
1149 ad_write(devc, 23, portc->speed & 0xff); /* Speed LSB */
1150 }
1151 old_fs = ad_read(devc, 8);
1152
1153 if (devc->model == MD_4232 || devc->model >= MD_4236)
1154 {
1155 tmp = ad_read(devc, 16);
1156 ad_write(devc, 16, tmp | 0x30);
1157 }
1158 if (devc->model == MD_IWAVE)
1159 ad_write(devc, 17, 0xc2); /* Disable variable frequency select */
1160
1161 ad_write(devc, 8, fs);
1162
1163 /*
1164 * Write to I8 starts resynchronization. Wait until it completes.
1165 */
1166
1167 timeout = 0;
1168 while (timeout < 100 && inb(devc->base) != 0x80)
1169 timeout++;
1170 timeout = 0;
1171 while (timeout < 10000 && inb(devc->base) == 0x80)
1172 timeout++;
1173
1174 if (devc->model >= MD_4232)
1175 ad_write(devc, 16, tmp & ~0x30);
1176
1177 ad_leave_MCE(devc); /*
1178 * Starts the calibration process.
1179 */
1180 spin_unlock_irqrestore(&devc->lock,flags);
1181 devc->xfer_count = 0;
1182
1183#ifndef EXCLUDE_TIMERS
1184 if (dev == timer_installed && devc->timer_running)
1185 if ((fs & 0x01) != (old_fs & 0x01))
1186 {
1187 ad1848_tmr_reprogram(dev);
1188 }
1189#endif
1190 ad1848_halt_output(dev);
1191 return 0;
1192}
1193
1194static int ad1848_prepare_for_input(int dev, int bsize, int bcount)
1195{
1196 int timeout;
1197 unsigned char fs, old_fs, tmp = 0;
1198 unsigned long flags;
1199 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1200 ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1201
1202 if (devc->audio_mode)
1203 return 0;
1204
1205 spin_lock_irqsave(&devc->lock,flags);
1206 fs = portc->speed_bits | (portc->format_bits << 5);
1207
1208 if (portc->channels > 1)
1209 fs |= 0x10;
1210
1211 ad_enter_MCE(devc); /* Enables changes to the format select reg */
1212
1213 if ((devc->model == MD_1845) || (devc->model == MD_1845_SSCAPE)) /* Use alternate speed select registers */
1214 {
1215 fs &= 0xf0; /* Mask off the rate select bits */
1216
1217 ad_write(devc, 22, (portc->speed >> 8) & 0xff); /* Speed MSB */
1218 ad_write(devc, 23, portc->speed & 0xff); /* Speed LSB */
1219 }
1220 if (devc->model == MD_4232)
1221 {
1222 tmp = ad_read(devc, 16);
1223 ad_write(devc, 16, tmp | 0x30);
1224 }
1225 if (devc->model == MD_IWAVE)
1226 ad_write(devc, 17, 0xc2); /* Disable variable frequency select */
1227
1228 /*
1229 * If mode >= 2 (CS4231), set I28. It's the capture format register.
1230 */
1231
1232 if (devc->model != MD_1848)
1233 {
1234 old_fs = ad_read(devc, 28);
1235 ad_write(devc, 28, fs);
1236
1237 /*
1238 * Write to I28 starts resynchronization. Wait until it completes.
1239 */
1240
1241 timeout = 0;
1242 while (timeout < 100 && inb(devc->base) != 0x80)
1243 timeout++;
1244
1245 timeout = 0;
1246 while (timeout < 10000 && inb(devc->base) == 0x80)
1247 timeout++;
1248
1249 if (devc->model != MD_1848 && devc->model != MD_1845 && devc->model != MD_1845_SSCAPE)
1250 {
1251 /*
1252 * CS4231 compatible devices don't have separate sampling rate selection
1253 * register for recording an playback. The I8 register is shared so we have to
1254 * set the speed encoding bits of it too.
1255 */
1256 unsigned char tmp = portc->speed_bits | (ad_read(devc, 8) & 0xf0);
1257
1258 ad_write(devc, 8, tmp);
1259 /*
1260 * Write to I8 starts resynchronization. Wait until it completes.
1261 */
1262 timeout = 0;
1263 while (timeout < 100 && inb(devc->base) != 0x80)
1264 timeout++;
1265
1266 timeout = 0;
1267 while (timeout < 10000 && inb(devc->base) == 0x80)
1268 timeout++;
1269 }
1270 }
1271 else
1272 { /* For AD1848 set I8. */
1273
1274 old_fs = ad_read(devc, 8);
1275 ad_write(devc, 8, fs);
1276 /*
1277 * Write to I8 starts resynchronization. Wait until it completes.
1278 */
1279 timeout = 0;
1280 while (timeout < 100 && inb(devc->base) != 0x80)
1281 timeout++;
1282 timeout = 0;
1283 while (timeout < 10000 && inb(devc->base) == 0x80)
1284 timeout++;
1285 }
1286
1287 if (devc->model == MD_4232)
1288 ad_write(devc, 16, tmp & ~0x30);
1289
1290 ad_leave_MCE(devc); /*
1291 * Starts the calibration process.
1292 */
1293 spin_unlock_irqrestore(&devc->lock,flags);
1294 devc->xfer_count = 0;
1295
1296#ifndef EXCLUDE_TIMERS
1297 if (dev == timer_installed && devc->timer_running)
1298 {
1299 if ((fs & 0x01) != (old_fs & 0x01))
1300 {
1301 ad1848_tmr_reprogram(dev);
1302 }
1303 }
1304#endif
1305 ad1848_halt_input(dev);
1306 return 0;
1307}
1308
1309static void ad1848_halt(int dev)
1310{
1311 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1312 ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1313
1314 unsigned char bits = ad_read(devc, 9);
1315
1316 if (bits & 0x01 && (portc->open_mode & OPEN_WRITE))
1317 ad1848_halt_output(dev);
1318
1319 if (bits & 0x02 && (portc->open_mode & OPEN_READ))
1320 ad1848_halt_input(dev);
1321 devc->audio_mode = 0;
1322}
1323
1324static void ad1848_halt_input(int dev)
1325{
1326 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1327 unsigned long flags;
1328
1329 if (!(ad_read(devc, 9) & 0x02))
1330 return; /* Capture not enabled */
1331
1332 spin_lock_irqsave(&devc->lock,flags);
1333
1334 ad_mute(devc);
1335
1336 {
1337 int tmout;
1338
1339 if(!isa_dma_bridge_buggy)
1340 disable_dma(audio_devs[dev]->dmap_in->dma);
1341
1342 for (tmout = 0; tmout < 100000; tmout++)
1343 if (ad_read(devc, 11) & 0x10)
1344 break;
1345 ad_write(devc, 9, ad_read(devc, 9) & ~0x02); /* Stop capture */
1346
1347 if(!isa_dma_bridge_buggy)
1348 enable_dma(audio_devs[dev]->dmap_in->dma);
1349 devc->audio_mode &= ~PCM_ENABLE_INPUT;
1350 }
1351
1352 outb(0, io_Status(devc)); /* Clear interrupt status */
1353 outb(0, io_Status(devc)); /* Clear interrupt status */
1354
1355 devc->audio_mode &= ~PCM_ENABLE_INPUT;
1356
1357 spin_unlock_irqrestore(&devc->lock,flags);
1358}
1359
1360static void ad1848_halt_output(int dev)
1361{
1362 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1363 unsigned long flags;
1364
1365 if (!(ad_read(devc, 9) & 0x01))
1366 return; /* Playback not enabled */
1367
1368 spin_lock_irqsave(&devc->lock,flags);
1369
1370 ad_mute(devc);
1371 {
1372 int tmout;
1373
1374 if(!isa_dma_bridge_buggy)
1375 disable_dma(audio_devs[dev]->dmap_out->dma);
1376
1377 for (tmout = 0; tmout < 100000; tmout++)
1378 if (ad_read(devc, 11) & 0x10)
1379 break;
1380 ad_write(devc, 9, ad_read(devc, 9) & ~0x01); /* Stop playback */
1381
1382 if(!isa_dma_bridge_buggy)
1383 enable_dma(audio_devs[dev]->dmap_out->dma);
1384
1385 devc->audio_mode &= ~PCM_ENABLE_OUTPUT;
1386 }
1387
1388 outb((0), io_Status(devc)); /* Clear interrupt status */
1389 outb((0), io_Status(devc)); /* Clear interrupt status */
1390
1391 devc->audio_mode &= ~PCM_ENABLE_OUTPUT;
1392
1393 spin_unlock_irqrestore(&devc->lock,flags);
1394}
1395
1396static void ad1848_trigger(int dev, int state)
1397{
1398 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
1399 ad1848_port_info *portc = (ad1848_port_info *) audio_devs[dev]->portc;
1400 unsigned long flags;
1401 unsigned char tmp, old;
1402
1403 spin_lock_irqsave(&devc->lock,flags);
1404 state &= devc->audio_mode;
1405
1406 tmp = old = ad_read(devc, 9);
1407
1408 if (portc->open_mode & OPEN_READ)
1409 {
1410 if (state & PCM_ENABLE_INPUT)
1411 tmp |= 0x02;
1412 else
1413 tmp &= ~0x02;
1414 }
1415 if (portc->open_mode & OPEN_WRITE)
1416 {
1417 if (state & PCM_ENABLE_OUTPUT)
1418 tmp |= 0x01;
1419 else
1420 tmp &= ~0x01;
1421 }
1422 /* ad_mute(devc); */
1423 if (tmp != old)
1424 {
1425 ad_write(devc, 9, tmp);
1426 ad_unmute(devc);
1427 }
1428 spin_unlock_irqrestore(&devc->lock,flags);
1429}
1430
1431static void ad1848_init_hw(ad1848_info * devc)
1432{
1433 int i;
1434 int *init_values;
1435
1436 /*
1437 * Initial values for the indirect registers of CS4248/AD1848.
1438 */
1439 static int init_values_a[] =
1440 {
1441 0xa8, 0xa8, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00,
1442 0x00, 0x0c, 0x02, 0x00, 0x8a, 0x01, 0x00, 0x00,
1443
1444 /* Positions 16 to 31 just for CS4231/2 and ad1845 */
1445 0x80, 0x00, 0x10, 0x10, 0x00, 0x00, 0x1f, 0x40,
1446 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
1447 };
1448
1449 static int init_values_b[] =
1450 {
1451 /*
1452 Values for the newer chips
1453 Some of the register initialization values were changed. In
1454 order to get rid of the click that preceded PCM playback,
1455 calibration was disabled on the 10th byte. On that same byte,
1456 dual DMA was enabled; on the 11th byte, ADC dithering was
1457 enabled, since that is theoretically desirable; on the 13th
1458 byte, Mode 3 was selected, to enable access to extended
1459 registers.
1460 */
1461 0xa8, 0xa8, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00,
1462 0x00, 0x00, 0x06, 0x00, 0xe0, 0x01, 0x00, 0x00,
1463 0x80, 0x00, 0x10, 0x10, 0x00, 0x00, 0x1f, 0x40,
1464 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
1465 };
1466
1467 /*
1468 * Select initialisation data
1469 */
1470
1471 init_values = init_values_a;
1472 if(devc->model >= MD_4236)
1473 init_values = init_values_b;
1474
1475 for (i = 0; i < 16; i++)
1476 ad_write(devc, i, init_values[i]);
1477
1478
1479 ad_mute(devc); /* Initialize some variables */
1480 ad_unmute(devc); /* Leave it unmuted now */
1481
1482 if (devc->model > MD_1848)
1483 {
1484 if (devc->model == MD_1845_SSCAPE)
1485 ad_write(devc, 12, ad_read(devc, 12) | 0x50);
1486 else
1487 ad_write(devc, 12, ad_read(devc, 12) | 0x40); /* Mode2 = enabled */
1488
1489 if (devc->model == MD_IWAVE)
1490 ad_write(devc, 12, 0x6c); /* Select codec mode 3 */
1491
1492 if (devc->model != MD_1845_SSCAPE)
1493 for (i = 16; i < 32; i++)
1494 ad_write(devc, i, init_values[i]);
1495
1496 if (devc->model == MD_IWAVE)
1497 ad_write(devc, 16, 0x30); /* Playback and capture counters enabled */
1498 }
1499 if (devc->model > MD_1848)
1500 {
1501 if (devc->audio_flags & DMA_DUPLEX)
1502 ad_write(devc, 9, ad_read(devc, 9) & ~0x04); /* Dual DMA mode */
1503 else
1504 ad_write(devc, 9, ad_read(devc, 9) | 0x04); /* Single DMA mode */
1505
1506 if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE)
1507 ad_write(devc, 27, ad_read(devc, 27) | 0x08); /* Alternate freq select enabled */
1508
1509 if (devc->model == MD_IWAVE)
1510 { /* Some magic Interwave specific initialization */
1511 ad_write(devc, 12, 0x6c); /* Select codec mode 3 */
1512 ad_write(devc, 16, 0x30); /* Playback and capture counters enabled */
1513 ad_write(devc, 17, 0xc2); /* Alternate feature enable */
1514 }
1515 }
1516 else
1517 {
1518 devc->audio_flags &= ~DMA_DUPLEX;
1519 ad_write(devc, 9, ad_read(devc, 9) | 0x04); /* Single DMA mode */
1520 if (soundpro)
1521 ad_write(devc, 12, ad_read(devc, 12) | 0x40); /* Mode2 = enabled */
1522 }
1523
1524 outb((0), io_Status(devc)); /* Clear pending interrupts */
1525
1526 /*
1527 * Toggle the MCE bit. It completes the initialization phase.
1528 */
1529
1530 ad_enter_MCE(devc); /* In case the bit was off */
1531 ad_leave_MCE(devc);
1532
1533 ad1848_mixer_reset(devc);
1534}
1535
1536int ad1848_detect(struct resource *ports, int *ad_flags, int *osp)
1537{
1538 unsigned char tmp;
1539 ad1848_info *devc = &adev_info[nr_ad1848_devs];
1540 unsigned char tmp1 = 0xff, tmp2 = 0xff;
1541 int optiC930 = 0; /* OPTi 82C930 flag */
1542 int interwave = 0;
1543 int ad1847_flag = 0;
1544 int cs4248_flag = 0;
1545 int sscape_flag = 0;
1546 int io_base = ports->start;
1547
1548 int i;
1549
1550 DDB(printk("ad1848_detect(%x)\n", io_base));
1551
1552 if (ad_flags)
1553 {
1554 if (*ad_flags == 0x12345678)
1555 {
1556 interwave = 1;
1557 *ad_flags = 0;
1558 }
1559
1560 if (*ad_flags == 0x87654321)
1561 {
1562 sscape_flag = 1;
1563 *ad_flags = 0;
1564 }
1565
1566 if (*ad_flags == 0x12345677)
1567 {
1568 cs4248_flag = 1;
1569 *ad_flags = 0;
1570 }
1571 }
1572 if (nr_ad1848_devs >= MAX_AUDIO_DEV)
1573 {
1574 printk(KERN_ERR "ad1848 - Too many audio devices\n");
1575 return 0;
1576 }
1577 spin_lock_init(&devc->lock);
1578 devc->base = io_base;
1579 devc->irq_ok = 0;
1580 devc->timer_running = 0;
1581 devc->MCE_bit = 0x40;
1582 devc->irq = 0;
1583 devc->open_mode = 0;
1584 devc->chip_name = devc->name = "AD1848";
1585 devc->model = MD_1848; /* AD1848 or CS4248 */
1586 devc->levels = NULL;
1587 devc->debug_flag = 0;
1588
1589 /*
1590 * Check that the I/O address is in use.
1591 *
1592 * The bit 0x80 of the base I/O port is known to be 0 after the
1593 * chip has performed its power on initialization. Just assume
1594 * this has happened before the OS is starting.
1595 *
1596 * If the I/O address is unused, it typically returns 0xff.
1597 */
1598
1599 if (inb(devc->base) == 0xff)
1600 {
1601 DDB(printk("ad1848_detect: The base I/O address appears to be dead\n"));
1602 }
1603
1604 /*
1605 * Wait for the device to stop initialization
1606 */
1607
1608 DDB(printk("ad1848_detect() - step 0\n"));
1609
1610 for (i = 0; i < 10000000; i++)
1611 {
1612 unsigned char x = inb(devc->base);
1613
1614 if (x == 0xff || !(x & 0x80))
1615 break;
1616 }
1617
1618 DDB(printk("ad1848_detect() - step A\n"));
1619
1620 if (inb(devc->base) == 0x80) /* Not ready. Let's wait */
1621 ad_leave_MCE(devc);
1622
1623 if ((inb(devc->base) & 0x80) != 0x00) /* Not a AD1848 */
1624 {
1625 DDB(printk("ad1848 detect error - step A (%02x)\n", (int) inb(devc->base)));
1626 return 0;
1627 }
1628
1629 /*
1630 * Test if it's possible to change contents of the indirect registers.
1631 * Registers 0 and 1 are ADC volume registers. The bit 0x10 is read only
1632 * so try to avoid using it.
1633 */
1634
1635 DDB(printk("ad1848_detect() - step B\n"));
1636 ad_write(devc, 0, 0xaa);
1637 ad_write(devc, 1, 0x45); /* 0x55 with bit 0x10 clear */
1638
1639 if ((tmp1 = ad_read(devc, 0)) != 0xaa || (tmp2 = ad_read(devc, 1)) != 0x45)
1640 {
1641 if (tmp2 == 0x65) /* AD1847 has couple of bits hardcoded to 1 */
1642 ad1847_flag = 1;
1643 else
1644 {
1645 DDB(printk("ad1848 detect error - step B (%x/%x)\n", tmp1, tmp2));
1646 return 0;
1647 }
1648 }
1649 DDB(printk("ad1848_detect() - step C\n"));
1650 ad_write(devc, 0, 0x45);
1651 ad_write(devc, 1, 0xaa);
1652
1653 if ((tmp1 = ad_read(devc, 0)) != 0x45 || (tmp2 = ad_read(devc, 1)) != 0xaa)
1654 {
1655 if (tmp2 == 0x8a) /* AD1847 has few bits hardcoded to 1 */
1656 ad1847_flag = 1;
1657 else
1658 {
1659 DDB(printk("ad1848 detect error - step C (%x/%x)\n", tmp1, tmp2));
1660 return 0;
1661 }
1662 }
1663
1664 /*
1665 * The indirect register I12 has some read only bits. Let's
1666 * try to change them.
1667 */
1668
1669 DDB(printk("ad1848_detect() - step D\n"));
1670 tmp = ad_read(devc, 12);
1671 ad_write(devc, 12, (~tmp) & 0x0f);
1672
1673 if ((tmp & 0x0f) != ((tmp1 = ad_read(devc, 12)) & 0x0f))
1674 {
1675 DDB(printk("ad1848 detect error - step D (%x)\n", tmp1));
1676 return 0;
1677 }
1678
1679 /*
1680 * NOTE! Last 4 bits of the reg I12 tell the chip revision.
1681 * 0x01=RevB and 0x0A=RevC.
1682 */
1683
1684 /*
1685 * The original AD1848/CS4248 has just 15 indirect registers. This means
1686 * that I0 and I16 should return the same value (etc.).
1687 * However this doesn't work with CS4248. Actually it seems to be impossible
1688 * to detect if the chip is a CS4231 or CS4248.
1689 * Ensure that the Mode2 enable bit of I12 is 0. Otherwise this test fails
1690 * with CS4231.
1691 */
1692
1693 /*
1694 * OPTi 82C930 has mode2 control bit in another place. This test will fail
1695 * with it. Accept this situation as a possible indication of this chip.
1696 */
1697
1698 DDB(printk("ad1848_detect() - step F\n"));
1699 ad_write(devc, 12, 0); /* Mode2=disabled */
1700
1701 for (i = 0; i < 16; i++)
1702 {
1703 if ((tmp1 = ad_read(devc, i)) != (tmp2 = ad_read(devc, i + 16)))
1704 {
1705 DDB(printk("ad1848 detect step F(%d/%x/%x) - OPTi chip???\n", i, tmp1, tmp2));
1706 if (!ad1847_flag)
1707 optiC930 = 1;
1708 break;
1709 }
1710 }
1711
1712 /*
1713 * Try to switch the chip to mode2 (CS4231) by setting the MODE2 bit (0x40).
1714 * The bit 0x80 is always 1 in CS4248 and CS4231.
1715 */
1716
1717 DDB(printk("ad1848_detect() - step G\n"));
1718
1719 if (ad_flags && *ad_flags == 400)
1720 *ad_flags = 0;
1721 else
1722 ad_write(devc, 12, 0x40); /* Set mode2, clear 0x80 */
1723
1724
1725 if (ad_flags)
1726 *ad_flags = 0;
1727
1728 tmp1 = ad_read(devc, 12);
1729 if (tmp1 & 0x80)
1730 {
1731 if (ad_flags)
1732 *ad_flags |= AD_F_CS4248;
1733
1734 devc->chip_name = "CS4248"; /* Our best knowledge just now */
1735 }
1736 if (optiC930 || (tmp1 & 0xc0) == (0x80 | 0x40))
1737 {
1738 /*
1739 * CS4231 detected - is it?
1740 *
1741 * Verify that setting I0 doesn't change I16.
1742 */
1743
1744 DDB(printk("ad1848_detect() - step H\n"));
1745 ad_write(devc, 16, 0); /* Set I16 to known value */
1746
1747 ad_write(devc, 0, 0x45);
1748 if ((tmp1 = ad_read(devc, 16)) != 0x45) /* No change -> CS4231? */
1749 {
1750 ad_write(devc, 0, 0xaa);
1751 if ((tmp1 = ad_read(devc, 16)) == 0xaa) /* Rotten bits? */
1752 {
1753 DDB(printk("ad1848 detect error - step H(%x)\n", tmp1));
1754 return 0;
1755 }
1756
1757 /*
1758 * Verify that some bits of I25 are read only.
1759 */
1760
1761 DDB(printk("ad1848_detect() - step I\n"));
1762 tmp1 = ad_read(devc, 25); /* Original bits */
1763 ad_write(devc, 25, ~tmp1); /* Invert all bits */
1764 if ((ad_read(devc, 25) & 0xe7) == (tmp1 & 0xe7))
1765 {
1766 int id;
1767
1768 /*
1769 * It's at least CS4231
1770 */
1771
1772 devc->chip_name = "CS4231";
1773 devc->model = MD_4231;
1774
1775 /*
1776 * It could be an AD1845 or CS4231A as well.
1777 * CS4231 and AD1845 report the same revision info in I25
1778 * while the CS4231A reports different.
1779 */
1780
1781 id = ad_read(devc, 25);
1782 if ((id & 0xe7) == 0x80) /* Device busy??? */
1783 id = ad_read(devc, 25);
1784 if ((id & 0xe7) == 0x80) /* Device still busy??? */
1785 id = ad_read(devc, 25);
1786 DDB(printk("ad1848_detect() - step J (%02x/%02x)\n", id, ad_read(devc, 25)));
1787
1788 if ((id & 0xe7) == 0x80) {
1789 /*
1790 * It must be a CS4231 or AD1845. The register I23 of
1791 * CS4231 is undefined and it appears to be read only.
1792 * AD1845 uses I23 for setting sample rate. Assume
1793 * the chip is AD1845 if I23 is changeable.
1794 */
1795
1796 unsigned char tmp = ad_read(devc, 23);
1797 ad_write(devc, 23, ~tmp);
1798
1799 if (interwave)
1800 {
1801 devc->model = MD_IWAVE;
1802 devc->chip_name = "IWave";
1803 }
1804 else if (ad_read(devc, 23) != tmp) /* AD1845 ? */
1805 {
1806 devc->chip_name = "AD1845";
1807 devc->model = MD_1845;
1808 }
1809 else if (cs4248_flag)
1810 {
1811 if (ad_flags)
1812 *ad_flags |= AD_F_CS4248;
1813 devc->chip_name = "CS4248";
1814 devc->model = MD_1848;
1815 ad_write(devc, 12, ad_read(devc, 12) & ~0x40); /* Mode2 off */
1816 }
1817 ad_write(devc, 23, tmp); /* Restore */
1818 }
1819 else
1820 {
1821 switch (id & 0x1f) {
1822 case 3: /* CS4236/CS4235/CS42xB/CS4239 */
1823 {
1824 int xid;
1825 ad_write(devc, 12, ad_read(devc, 12) | 0x60); /* switch to mode 3 */
1826 ad_write(devc, 23, 0x9c); /* select extended register 25 */
1827 xid = inb(io_Indexed_Data(devc));
1828 ad_write(devc, 12, ad_read(devc, 12) & ~0x60); /* back to mode 0 */
1829 switch (xid & 0x1f)
1830 {
1831 case 0x00:
1832 devc->chip_name = "CS4237B(B)";
1833 devc->model = MD_42xB;
1834 break;
1835 case 0x08:
1836 /* Seems to be a 4238 ?? */
1837 devc->chip_name = "CS4238";
1838 devc->model = MD_42xB;
1839 break;
1840 case 0x09:
1841 devc->chip_name = "CS4238B";
1842 devc->model = MD_42xB;
1843 break;
1844 case 0x0b:
1845 devc->chip_name = "CS4236B";
1846 devc->model = MD_4236;
1847 break;
1848 case 0x10:
1849 devc->chip_name = "CS4237B";
1850 devc->model = MD_42xB;
1851 break;
1852 case 0x1d:
1853 devc->chip_name = "CS4235";
1854 devc->model = MD_4235;
1855 break;
1856 case 0x1e:
1857 devc->chip_name = "CS4239";
1858 devc->model = MD_4239;
1859 break;
1860 default:
1861 printk("Chip ident is %X.\n", xid&0x1F);
1862 devc->chip_name = "CS42xx";
1863 devc->model = MD_4232;
1864 break;
1865 }
1866 }
1867 break;
1868
1869 case 2: /* CS4232/CS4232A */
1870 devc->chip_name = "CS4232";
1871 devc->model = MD_4232;
1872 break;
1873
1874 case 0:
1875 if ((id & 0xe0) == 0xa0)
1876 {
1877 devc->chip_name = "CS4231A";
1878 devc->model = MD_4231A;
1879 }
1880 else
1881 {
1882 devc->chip_name = "CS4321";
1883 devc->model = MD_4231;
1884 }
1885 break;
1886
1887 default: /* maybe */
1888 DDB(printk("ad1848: I25 = %02x/%02x\n", ad_read(devc, 25), ad_read(devc, 25) & 0xe7));
1889 if (optiC930)
1890 {
1891 devc->chip_name = "82C930";
1892 devc->model = MD_C930;
1893 }
1894 else
1895 {
1896 devc->chip_name = "CS4231";
1897 devc->model = MD_4231;
1898 }
1899 }
1900 }
1901 }
1902 ad_write(devc, 25, tmp1); /* Restore bits */
1903
1904 DDB(printk("ad1848_detect() - step K\n"));
1905 }
1906 } else if (tmp1 == 0x0a) {
1907 /*
1908 * Is it perhaps a SoundPro CMI8330?
1909 * If so, then we should be able to change indirect registers
1910 * greater than I15 after activating MODE2, even though reading
1911 * back I12 does not show it.
1912 */
1913
1914 /*
1915 * Let's try comparing register values
1916 */
1917 for (i = 0; i < 16; i++) {
1918 if ((tmp1 = ad_read(devc, i)) != (tmp2 = ad_read(devc, i + 16))) {
1919 DDB(printk("ad1848 detect step H(%d/%x/%x) - SoundPro chip?\n", i, tmp1, tmp2));
1920 soundpro = 1;
1921 devc->chip_name = "SoundPro CMI 8330";
1922 break;
1923 }
1924 }
1925 }
1926
1927 DDB(printk("ad1848_detect() - step L\n"));
1928 if (ad_flags)
1929 {
1930 if (devc->model != MD_1848)
1931 *ad_flags |= AD_F_CS4231;
1932 }
1933 DDB(printk("ad1848_detect() - Detected OK\n"));
1934
1935 if (devc->model == MD_1848 && ad1847_flag)
1936 devc->chip_name = "AD1847";
1937
1938
1939 if (sscape_flag == 1)
1940 devc->model = MD_1845_SSCAPE;
1941
1942 return 1;
1943}
1944
1945int ad1848_init (char *name, struct resource *ports, int irq, int dma_playback,
1946 int dma_capture, int share_dma, int *osp, struct module *owner)
1947{
1948 /*
1949 * NOTE! If irq < 0, there is another driver which has allocated the IRQ
1950 * so that this driver doesn't need to allocate/deallocate it.
1951 * The actually used IRQ is ABS(irq).
1952 */
1953
1954 int my_dev;
1955 char dev_name[100];
1956 int e;
1957
1958 ad1848_info *devc = &adev_info[nr_ad1848_devs];
1959
1960 ad1848_port_info *portc = NULL;
1961
1962 devc->irq = (irq > 0) ? irq : 0;
1963 devc->open_mode = 0;
1964 devc->timer_ticks = 0;
1965 devc->dma1 = dma_playback;
1966 devc->dma2 = dma_capture;
1967 devc->subtype = cfg.card_subtype;
1968 devc->audio_flags = DMA_AUTOMODE;
1969 devc->playback_dev = devc->record_dev = 0;
1970 if (name != NULL)
1971 devc->name = name;
1972
1973 if (name != NULL && name[0] != 0)
1974 sprintf(dev_name,
1975 "%s (%s)", name, devc->chip_name);
1976 else
1977 sprintf(dev_name,
1978 "Generic audio codec (%s)", devc->chip_name);
1979
1980 rename_region(ports, devc->name);
1981
1982 conf_printf2(dev_name, devc->base, devc->irq, dma_playback, dma_capture);
1983
1984 if (devc->model == MD_1848 || devc->model == MD_C930)
1985 devc->audio_flags |= DMA_HARDSTOP;
1986
1987 if (devc->model > MD_1848)
1988 {
1989 if (devc->dma1 == devc->dma2 || devc->dma2 == -1 || devc->dma1 == -1)
1990 devc->audio_flags &= ~DMA_DUPLEX;
1991 else
1992 devc->audio_flags |= DMA_DUPLEX;
1993 }
1994
Robert P. J. Day5cbded52006-12-13 00:35:56 -08001995 portc = kmalloc(sizeof(ad1848_port_info), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001996 if(portc==NULL) {
1997 release_region(devc->base, 4);
1998 return -1;
1999 }
2000
2001 if ((my_dev = sound_install_audiodrv(AUDIO_DRIVER_VERSION,
2002 dev_name,
2003 &ad1848_audio_driver,
2004 sizeof(struct audio_driver),
2005 devc->audio_flags,
2006 ad_format_mask[devc->model],
2007 devc,
2008 dma_playback,
2009 dma_capture)) < 0)
2010 {
2011 release_region(devc->base, 4);
2012 kfree(portc);
2013 return -1;
2014 }
2015
2016 audio_devs[my_dev]->portc = portc;
2017 audio_devs[my_dev]->mixer_dev = -1;
2018 if (owner)
2019 audio_devs[my_dev]->d->owner = owner;
2020 memset((char *) portc, 0, sizeof(*portc));
2021
2022 nr_ad1848_devs++;
2023
Linus Torvalds1da177e2005-04-16 15:20:36 -07002024 ad1848_init_hw(devc);
2025
2026 if (irq > 0)
2027 {
2028 devc->dev_no = my_dev;
Andrew Mortonb307e852006-05-20 15:00:36 -07002029 if (request_irq(devc->irq, adintr, 0, devc->name,
2030 (void *)(long)my_dev) < 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002031 {
2032 printk(KERN_WARNING "ad1848: Unable to allocate IRQ\n");
2033 /* Don't free it either then.. */
2034 devc->irq = 0;
2035 }
2036 if (capabilities[devc->model].flags & CAP_F_TIMER)
2037 {
2038#ifndef CONFIG_SMP
2039 int x;
2040 unsigned char tmp = ad_read(devc, 16);
2041#endif
2042
2043 devc->timer_ticks = 0;
2044
2045 ad_write(devc, 21, 0x00); /* Timer MSB */
2046 ad_write(devc, 20, 0x10); /* Timer LSB */
2047#ifndef CONFIG_SMP
2048 ad_write(devc, 16, tmp | 0x40); /* Enable timer */
2049 for (x = 0; x < 100000 && devc->timer_ticks == 0; x++);
2050 ad_write(devc, 16, tmp & ~0x40); /* Disable timer */
2051
2052 if (devc->timer_ticks == 0)
2053 printk(KERN_WARNING "ad1848: Interrupt test failed (IRQ%d)\n", irq);
2054 else
2055 {
2056 DDB(printk("Interrupt test OK\n"));
2057 devc->irq_ok = 1;
2058 }
2059#else
2060 devc->irq_ok = 1;
2061#endif
2062 }
2063 else
2064 devc->irq_ok = 1; /* Couldn't test. assume it's OK */
2065 } else if (irq < 0)
2066 irq2dev[-irq] = devc->dev_no = my_dev;
2067
2068#ifndef EXCLUDE_TIMERS
2069 if ((capabilities[devc->model].flags & CAP_F_TIMER) &&
2070 devc->irq_ok)
2071 ad1848_tmr_install(my_dev);
2072#endif
2073
2074 if (!share_dma)
2075 {
2076 if (sound_alloc_dma(dma_playback, devc->name))
2077 printk(KERN_WARNING "ad1848.c: Can't allocate DMA%d\n", dma_playback);
2078
2079 if (dma_capture != dma_playback)
2080 if (sound_alloc_dma(dma_capture, devc->name))
2081 printk(KERN_WARNING "ad1848.c: Can't allocate DMA%d\n", dma_capture);
2082 }
2083
2084 if ((e = sound_install_mixer(MIXER_DRIVER_VERSION,
2085 dev_name,
2086 &ad1848_mixer_operations,
2087 sizeof(struct mixer_operations),
2088 devc)) >= 0)
2089 {
2090 audio_devs[my_dev]->mixer_dev = e;
2091 if (owner)
2092 mixer_devs[e]->owner = owner;
2093 }
2094 return my_dev;
2095}
2096
2097int ad1848_control(int cmd, int arg)
2098{
2099 ad1848_info *devc;
2100 unsigned long flags;
2101
2102 if (nr_ad1848_devs < 1)
2103 return -ENODEV;
2104
2105 devc = &adev_info[nr_ad1848_devs - 1];
2106
2107 switch (cmd)
2108 {
2109 case AD1848_SET_XTAL: /* Change clock frequency of AD1845 (only ) */
2110 if (devc->model != MD_1845 || devc->model != MD_1845_SSCAPE)
2111 return -EINVAL;
2112 spin_lock_irqsave(&devc->lock,flags);
2113 ad_enter_MCE(devc);
2114 ad_write(devc, 29, (ad_read(devc, 29) & 0x1f) | (arg << 5));
2115 ad_leave_MCE(devc);
2116 spin_unlock_irqrestore(&devc->lock,flags);
2117 break;
2118
2119 case AD1848_MIXER_REROUTE:
2120 {
2121 int o = (arg >> 8) & 0xff;
2122 int n = arg & 0xff;
2123
2124 if (o < 0 || o >= SOUND_MIXER_NRDEVICES)
2125 return -EINVAL;
2126
2127 if (!(devc->supported_devices & (1 << o)) &&
2128 !(devc->supported_rec_devices & (1 << o)))
2129 return -EINVAL;
2130
2131 if (n == SOUND_MIXER_NONE)
2132 { /* Just hide this control */
2133 ad1848_mixer_set(devc, o, 0); /* Shut up it */
2134 devc->supported_devices &= ~(1 << o);
2135 devc->supported_rec_devices &= ~(1 << o);
2136 break;
2137 }
2138
2139 /* Make the mixer control identified by o to appear as n */
2140 if (n < 0 || n >= SOUND_MIXER_NRDEVICES)
2141 return -EINVAL;
2142
2143 devc->mixer_reroute[n] = o; /* Rename the control */
2144 if (devc->supported_devices & (1 << o))
2145 devc->supported_devices |= (1 << n);
2146 if (devc->supported_rec_devices & (1 << o))
2147 devc->supported_rec_devices |= (1 << n);
2148
2149 devc->supported_devices &= ~(1 << o);
2150 devc->supported_rec_devices &= ~(1 << o);
2151 }
2152 break;
2153 }
2154 return 0;
2155}
2156
2157void ad1848_unload(int io_base, int irq, int dma_playback, int dma_capture, int share_dma)
2158{
2159 int i, mixer, dev = 0;
2160 ad1848_info *devc = NULL;
2161
2162 for (i = 0; devc == NULL && i < nr_ad1848_devs; i++)
2163 {
2164 if (adev_info[i].base == io_base)
2165 {
2166 devc = &adev_info[i];
2167 dev = devc->dev_no;
2168 }
2169 }
2170
2171 if (devc != NULL)
2172 {
Jesper Juhl09417372005-06-25 14:58:49 -07002173 kfree(audio_devs[dev]->portc);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002174 release_region(devc->base, 4);
2175
2176 if (!share_dma)
2177 {
2178 if (devc->irq > 0) /* There is no point in freeing irq, if it wasn't allocated */
Andrew Mortonb307e852006-05-20 15:00:36 -07002179 free_irq(devc->irq, (void *)(long)devc->dev_no);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002180
2181 sound_free_dma(dma_playback);
2182
2183 if (dma_playback != dma_capture)
2184 sound_free_dma(dma_capture);
2185
2186 }
2187 mixer = audio_devs[devc->dev_no]->mixer_dev;
2188 if(mixer>=0)
2189 sound_unload_mixerdev(mixer);
2190
Linus Torvalds1da177e2005-04-16 15:20:36 -07002191 nr_ad1848_devs--;
2192 for ( ; i < nr_ad1848_devs ; i++)
2193 adev_info[i] = adev_info[i+1];
2194 }
2195 else
2196 printk(KERN_ERR "ad1848: Can't find device to be unloaded. Base=%x\n", io_base);
2197}
2198
David Howells7d12e782006-10-05 14:55:46 +01002199static irqreturn_t adintr(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002200{
2201 unsigned char status;
2202 ad1848_info *devc;
2203 int dev;
2204 int alt_stat = 0xff;
2205 unsigned char c930_stat = 0;
2206 int cnt = 0;
2207
Andrew Mortonb307e852006-05-20 15:00:36 -07002208 dev = (long)dev_id;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002209 devc = (ad1848_info *) audio_devs[dev]->devc;
2210
2211interrupt_again: /* Jump back here if int status doesn't reset */
2212
2213 status = inb(io_Status(devc));
2214
2215 if (status == 0x80)
2216 printk(KERN_DEBUG "adintr: Why?\n");
2217 if (devc->model == MD_1848)
2218 outb((0), io_Status(devc)); /* Clear interrupt status */
2219
2220 if (status & 0x01)
2221 {
2222 if (devc->model == MD_C930)
2223 { /* 82C930 has interrupt status register in MAD16 register MC11 */
2224
2225 spin_lock(&devc->lock);
2226
2227 /* 0xe0e is C930 address port
2228 * 0xe0f is C930 data port
2229 */
2230 outb(11, 0xe0e);
2231 c930_stat = inb(0xe0f);
2232 outb((~c930_stat), 0xe0f);
2233
2234 spin_unlock(&devc->lock);
2235
2236 alt_stat = (c930_stat << 2) & 0x30;
2237 }
2238 else if (devc->model != MD_1848)
2239 {
2240 spin_lock(&devc->lock);
2241 alt_stat = ad_read(devc, 24);
2242 ad_write(devc, 24, ad_read(devc, 24) & ~alt_stat); /* Selective ack */
2243 spin_unlock(&devc->lock);
2244 }
2245
2246 if ((devc->open_mode & OPEN_READ) && (devc->audio_mode & PCM_ENABLE_INPUT) && (alt_stat & 0x20))
2247 {
2248 DMAbuf_inputintr(devc->record_dev);
2249 }
2250 if ((devc->open_mode & OPEN_WRITE) && (devc->audio_mode & PCM_ENABLE_OUTPUT) &&
2251 (alt_stat & 0x10))
2252 {
2253 DMAbuf_outputintr(devc->playback_dev, 1);
2254 }
2255 if (devc->model != MD_1848 && (alt_stat & 0x40)) /* Timer interrupt */
2256 {
2257 devc->timer_ticks++;
2258#ifndef EXCLUDE_TIMERS
2259 if (timer_installed == dev && devc->timer_running)
2260 sound_timer_interrupt();
2261#endif
2262 }
2263 }
2264/*
2265 * Sometimes playback or capture interrupts occur while a timer interrupt
2266 * is being handled. The interrupt will not be retriggered if we don't
2267 * handle it now. Check if an interrupt is still pending and restart
2268 * the handler in this case.
2269 */
2270 if (inb(io_Status(devc)) & 0x01 && cnt++ < 4)
2271 {
2272 goto interrupt_again;
2273 }
2274 return IRQ_HANDLED;
2275}
2276
2277/*
2278 * Experimental initialization sequence for the integrated sound system
2279 * of the Compaq Deskpro M.
2280 */
2281
2282static int init_deskpro_m(struct address_info *hw_config)
2283{
2284 unsigned char tmp;
2285
2286 if ((tmp = inb(0xc44)) == 0xff)
2287 {
2288 DDB(printk("init_deskpro_m: Dead port 0xc44\n"));
2289 return 0;
2290 }
2291
2292 outb(0x10, 0xc44);
2293 outb(0x40, 0xc45);
2294 outb(0x00, 0xc46);
2295 outb(0xe8, 0xc47);
2296 outb(0x14, 0xc44);
2297 outb(0x40, 0xc45);
2298 outb(0x00, 0xc46);
2299 outb(0xe8, 0xc47);
2300 outb(0x10, 0xc44);
2301
2302 return 1;
2303}
2304
2305/*
2306 * Experimental initialization sequence for the integrated sound system
2307 * of Compaq Deskpro XL.
2308 */
2309
2310static int init_deskpro(struct address_info *hw_config)
2311{
2312 unsigned char tmp;
2313
2314 if ((tmp = inb(0xc44)) == 0xff)
2315 {
2316 DDB(printk("init_deskpro: Dead port 0xc44\n"));
2317 return 0;
2318 }
2319 outb((tmp | 0x04), 0xc44); /* Select bank 1 */
2320 if (inb(0xc44) != 0x04)
2321 {
2322 DDB(printk("init_deskpro: Invalid bank1 signature in port 0xc44\n"));
2323 return 0;
2324 }
2325 /*
2326 * OK. It looks like a Deskpro so let's proceed.
2327 */
2328
2329 /*
2330 * I/O port 0xc44 Audio configuration register.
2331 *
2332 * bits 0xc0: Audio revision bits
2333 * 0x00 = Compaq Business Audio
2334 * 0x40 = MS Sound System Compatible (reset default)
2335 * 0x80 = Reserved
2336 * 0xc0 = Reserved
2337 * bit 0x20: No Wait State Enable
2338 * 0x00 = Disabled (reset default, DMA mode)
2339 * 0x20 = Enabled (programmed I/O mode)
2340 * bit 0x10: MS Sound System Decode Enable
2341 * 0x00 = Decoding disabled (reset default)
2342 * 0x10 = Decoding enabled
2343 * bit 0x08: FM Synthesis Decode Enable
2344 * 0x00 = Decoding Disabled (reset default)
2345 * 0x08 = Decoding enabled
2346 * bit 0x04 Bank select
2347 * 0x00 = Bank 0
2348 * 0x04 = Bank 1
2349 * bits 0x03 MSS Base address
2350 * 0x00 = 0x530 (reset default)
2351 * 0x01 = 0x604
2352 * 0x02 = 0xf40
2353 * 0x03 = 0xe80
2354 */
2355
2356#ifdef DEBUGXL
2357 /* Debug printing */
2358 printk("Port 0xc44 (before): ");
2359 outb((tmp & ~0x04), 0xc44);
2360 printk("%02x ", inb(0xc44));
2361 outb((tmp | 0x04), 0xc44);
2362 printk("%02x\n", inb(0xc44));
2363#endif
2364
2365 /* Set bank 1 of the register */
2366 tmp = 0x58; /* MSS Mode, MSS&FM decode enabled */
2367
2368 switch (hw_config->io_base)
2369 {
2370 case 0x530:
2371 tmp |= 0x00;
2372 break;
2373 case 0x604:
2374 tmp |= 0x01;
2375 break;
2376 case 0xf40:
2377 tmp |= 0x02;
2378 break;
2379 case 0xe80:
2380 tmp |= 0x03;
2381 break;
2382 default:
2383 DDB(printk("init_deskpro: Invalid MSS port %x\n", hw_config->io_base));
2384 return 0;
2385 }
2386 outb((tmp & ~0x04), 0xc44); /* Write to bank=0 */
2387
2388#ifdef DEBUGXL
2389 /* Debug printing */
2390 printk("Port 0xc44 (after): ");
2391 outb((tmp & ~0x04), 0xc44); /* Select bank=0 */
2392 printk("%02x ", inb(0xc44));
2393 outb((tmp | 0x04), 0xc44); /* Select bank=1 */
2394 printk("%02x\n", inb(0xc44));
2395#endif
2396
2397 /*
2398 * I/O port 0xc45 FM Address Decode/MSS ID Register.
2399 *
2400 * bank=0, bits 0xfe: FM synthesis Decode Compare bits 7:1 (default=0x88)
2401 * bank=0, bit 0x01: SBIC Power Control Bit
2402 * 0x00 = Powered up
2403 * 0x01 = Powered down
2404 * bank=1, bits 0xfc: MSS ID (default=0x40)
2405 */
2406
2407#ifdef DEBUGXL
2408 /* Debug printing */
2409 printk("Port 0xc45 (before): ");
2410 outb((tmp & ~0x04), 0xc44); /* Select bank=0 */
2411 printk("%02x ", inb(0xc45));
2412 outb((tmp | 0x04), 0xc44); /* Select bank=1 */
2413 printk("%02x\n", inb(0xc45));
2414#endif
2415
2416 outb((tmp & ~0x04), 0xc44); /* Select bank=0 */
2417 outb((0x88), 0xc45); /* FM base 7:0 = 0x88 */
2418 outb((tmp | 0x04), 0xc44); /* Select bank=1 */
2419 outb((0x10), 0xc45); /* MSS ID = 0x10 (MSS port returns 0x04) */
2420
2421#ifdef DEBUGXL
2422 /* Debug printing */
2423 printk("Port 0xc45 (after): ");
2424 outb((tmp & ~0x04), 0xc44); /* Select bank=0 */
2425 printk("%02x ", inb(0xc45));
2426 outb((tmp | 0x04), 0xc44); /* Select bank=1 */
2427 printk("%02x\n", inb(0xc45));
2428#endif
2429
2430
2431 /*
2432 * I/O port 0xc46 FM Address Decode/Address ASIC Revision Register.
2433 *
2434 * bank=0, bits 0xff: FM synthesis Decode Compare bits 15:8 (default=0x03)
2435 * bank=1, bits 0xff: Audio addressing ASIC id
2436 */
2437
2438#ifdef DEBUGXL
2439 /* Debug printing */
2440 printk("Port 0xc46 (before): ");
2441 outb((tmp & ~0x04), 0xc44); /* Select bank=0 */
2442 printk("%02x ", inb(0xc46));
2443 outb((tmp | 0x04), 0xc44); /* Select bank=1 */
2444 printk("%02x\n", inb(0xc46));
2445#endif
2446
2447 outb((tmp & ~0x04), 0xc44); /* Select bank=0 */
2448 outb((0x03), 0xc46); /* FM base 15:8 = 0x03 */
2449 outb((tmp | 0x04), 0xc44); /* Select bank=1 */
2450 outb((0x11), 0xc46); /* ASIC ID = 0x11 */
2451
2452#ifdef DEBUGXL
2453 /* Debug printing */
2454 printk("Port 0xc46 (after): ");
2455 outb((tmp & ~0x04), 0xc44); /* Select bank=0 */
2456 printk("%02x ", inb(0xc46));
2457 outb((tmp | 0x04), 0xc44); /* Select bank=1 */
2458 printk("%02x\n", inb(0xc46));
2459#endif
2460
2461 /*
2462 * I/O port 0xc47 FM Address Decode Register.
2463 *
2464 * bank=0, bits 0xff: Decode enable selection for various FM address bits
2465 * bank=1, bits 0xff: Reserved
2466 */
2467
2468#ifdef DEBUGXL
2469 /* Debug printing */
2470 printk("Port 0xc47 (before): ");
2471 outb((tmp & ~0x04), 0xc44); /* Select bank=0 */
2472 printk("%02x ", inb(0xc47));
2473 outb((tmp | 0x04), 0xc44); /* Select bank=1 */
2474 printk("%02x\n", inb(0xc47));
2475#endif
2476
2477 outb((tmp & ~0x04), 0xc44); /* Select bank=0 */
2478 outb((0x7c), 0xc47); /* FM decode enable bits = 0x7c */
2479 outb((tmp | 0x04), 0xc44); /* Select bank=1 */
2480 outb((0x00), 0xc47); /* Reserved bank1 = 0x00 */
2481
2482#ifdef DEBUGXL
2483 /* Debug printing */
2484 printk("Port 0xc47 (after): ");
2485 outb((tmp & ~0x04), 0xc44); /* Select bank=0 */
2486 printk("%02x ", inb(0xc47));
2487 outb((tmp | 0x04), 0xc44); /* Select bank=1 */
2488 printk("%02x\n", inb(0xc47));
2489#endif
2490
2491 /*
2492 * I/O port 0xc6f = Audio Disable Function Register
2493 */
2494
2495#ifdef DEBUGXL
2496 printk("Port 0xc6f (before) = %02x\n", inb(0xc6f));
2497#endif
2498
2499 outb((0x80), 0xc6f);
2500
2501#ifdef DEBUGXL
2502 printk("Port 0xc6f (after) = %02x\n", inb(0xc6f));
2503#endif
2504
2505 return 1;
2506}
2507
2508int probe_ms_sound(struct address_info *hw_config, struct resource *ports)
2509{
2510 unsigned char tmp;
2511
2512 DDB(printk("Entered probe_ms_sound(%x, %d)\n", hw_config->io_base, hw_config->card_subtype));
2513
2514 if (hw_config->card_subtype == 1) /* Has no IRQ/DMA registers */
2515 {
2516 /* check_opl3(0x388, hw_config); */
2517 return ad1848_detect(ports, NULL, hw_config->osp);
2518 }
2519
2520 if (deskpro_xl && hw_config->card_subtype == 2) /* Compaq Deskpro XL */
2521 {
2522 if (!init_deskpro(hw_config))
2523 return 0;
2524 }
2525
2526 if (deskpro_m) /* Compaq Deskpro M */
2527 {
2528 if (!init_deskpro_m(hw_config))
2529 return 0;
2530 }
2531
2532 /*
2533 * Check if the IO port returns valid signature. The original MS Sound
2534 * system returns 0x04 while some cards (AudioTrix Pro for example)
2535 * return 0x00 or 0x0f.
2536 */
2537
2538 if ((tmp = inb(hw_config->io_base + 3)) == 0xff) /* Bus float */
2539 {
2540 int ret;
2541
2542 DDB(printk("I/O address is inactive (%x)\n", tmp));
2543 if (!(ret = ad1848_detect(ports, NULL, hw_config->osp)))
2544 return 0;
2545 return 1;
2546 }
2547 DDB(printk("MSS signature = %x\n", tmp & 0x3f));
2548 if ((tmp & 0x3f) != 0x04 &&
2549 (tmp & 0x3f) != 0x0f &&
2550 (tmp & 0x3f) != 0x00)
2551 {
2552 int ret;
2553
2554 MDB(printk(KERN_ERR "No MSS signature detected on port 0x%x (0x%x)\n", hw_config->io_base, (int) inb(hw_config->io_base + 3)));
2555 DDB(printk("Trying to detect codec anyway but IRQ/DMA may not work\n"));
2556 if (!(ret = ad1848_detect(ports, NULL, hw_config->osp)))
2557 return 0;
2558
2559 hw_config->card_subtype = 1;
2560 return 1;
2561 }
2562 if ((hw_config->irq != 5) &&
2563 (hw_config->irq != 7) &&
2564 (hw_config->irq != 9) &&
2565 (hw_config->irq != 10) &&
2566 (hw_config->irq != 11) &&
2567 (hw_config->irq != 12))
2568 {
2569 printk(KERN_ERR "MSS: Bad IRQ %d\n", hw_config->irq);
2570 return 0;
2571 }
2572 if (hw_config->dma != 0 && hw_config->dma != 1 && hw_config->dma != 3)
2573 {
2574 printk(KERN_ERR "MSS: Bad DMA %d\n", hw_config->dma);
2575 return 0;
2576 }
2577 /*
2578 * Check that DMA0 is not in use with a 8 bit board.
2579 */
2580
2581 if (hw_config->dma == 0 && inb(hw_config->io_base + 3) & 0x80)
2582 {
2583 printk(KERN_ERR "MSS: Can't use DMA0 with a 8 bit card/slot\n");
2584 return 0;
2585 }
2586 if (hw_config->irq > 7 && hw_config->irq != 9 && inb(hw_config->io_base + 3) & 0x80)
2587 {
2588 printk(KERN_ERR "MSS: Can't use IRQ%d with a 8 bit card/slot\n", hw_config->irq);
2589 return 0;
2590 }
2591 return ad1848_detect(ports, NULL, hw_config->osp);
2592}
2593
2594void attach_ms_sound(struct address_info *hw_config, struct resource *ports, struct module *owner)
2595{
2596 static signed char interrupt_bits[12] =
2597 {
2598 -1, -1, -1, -1, -1, 0x00, -1, 0x08, -1, 0x10, 0x18, 0x20
2599 };
2600 signed char bits;
2601 char dma2_bit = 0;
2602
2603 static char dma_bits[4] =
2604 {
2605 1, 2, 0, 3
2606 };
2607
2608 int config_port = hw_config->io_base + 0;
2609 int version_port = hw_config->io_base + 3;
2610 int dma = hw_config->dma;
2611 int dma2 = hw_config->dma2;
2612
2613 if (hw_config->card_subtype == 1) /* Has no IRQ/DMA registers */
2614 {
2615 hw_config->slots[0] = ad1848_init("MS Sound System", ports,
2616 hw_config->irq,
2617 hw_config->dma,
2618 hw_config->dma2, 0,
2619 hw_config->osp,
2620 owner);
2621 return;
2622 }
2623 /*
2624 * Set the IRQ and DMA addresses.
2625 */
2626
2627 bits = interrupt_bits[hw_config->irq];
2628 if (bits == -1)
2629 {
2630 printk(KERN_ERR "MSS: Bad IRQ %d\n", hw_config->irq);
2631 release_region(ports->start, 4);
2632 release_region(ports->start - 4, 4);
2633 return;
2634 }
2635 outb((bits | 0x40), config_port);
2636 if ((inb(version_port) & 0x40) == 0)
2637 printk(KERN_ERR "[MSS: IRQ Conflict?]\n");
2638
2639/*
2640 * Handle the capture DMA channel
2641 */
2642
2643 if (dma2 != -1 && dma2 != dma)
2644 {
2645 if (!((dma == 0 && dma2 == 1) ||
2646 (dma == 1 && dma2 == 0) ||
2647 (dma == 3 && dma2 == 0)))
2648 { /* Unsupported combination. Try to swap channels */
2649 int tmp = dma;
2650
2651 dma = dma2;
2652 dma2 = tmp;
2653 }
2654 if ((dma == 0 && dma2 == 1) ||
2655 (dma == 1 && dma2 == 0) ||
2656 (dma == 3 && dma2 == 0))
2657 {
2658 dma2_bit = 0x04; /* Enable capture DMA */
2659 }
2660 else
2661 {
2662 printk(KERN_WARNING "MSS: Invalid capture DMA\n");
2663 dma2 = dma;
2664 }
2665 }
2666 else
2667 {
2668 dma2 = dma;
2669 }
2670
2671 hw_config->dma = dma;
2672 hw_config->dma2 = dma2;
2673
2674 outb((bits | dma_bits[dma] | dma2_bit), config_port); /* Write IRQ+DMA setup */
2675
2676 hw_config->slots[0] = ad1848_init("MS Sound System", ports,
2677 hw_config->irq,
2678 dma, dma2, 0,
2679 hw_config->osp,
2680 THIS_MODULE);
2681}
2682
2683void unload_ms_sound(struct address_info *hw_config)
2684{
2685 ad1848_unload(hw_config->io_base + 4,
2686 hw_config->irq,
2687 hw_config->dma,
2688 hw_config->dma2, 0);
2689 sound_unload_audiodev(hw_config->slots[0]);
2690 release_region(hw_config->io_base, 4);
2691}
2692
2693#ifndef EXCLUDE_TIMERS
2694
2695/*
2696 * Timer stuff (for /dev/music).
2697 */
2698
2699static unsigned int current_interval;
2700
2701static unsigned int ad1848_tmr_start(int dev, unsigned int usecs)
2702{
2703 unsigned long flags;
2704 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
2705 unsigned long xtal_nsecs; /* nanoseconds per xtal oscillator tick */
2706 unsigned long divider;
2707
2708 spin_lock_irqsave(&devc->lock,flags);
2709
2710 /*
2711 * Length of the timer interval (in nanoseconds) depends on the
2712 * selected crystal oscillator. Check this from bit 0x01 of I8.
2713 *
2714 * AD1845 has just one oscillator which has cycle time of 10.050 us
2715 * (when a 24.576 MHz xtal oscillator is used).
2716 *
2717 * Convert requested interval to nanoseconds before computing
2718 * the timer divider.
2719 */
2720
2721 if (devc->model == MD_1845 || devc->model == MD_1845_SSCAPE)
2722 xtal_nsecs = 10050;
2723 else if (ad_read(devc, 8) & 0x01)
2724 xtal_nsecs = 9920;
2725 else
2726 xtal_nsecs = 9969;
2727
2728 divider = (usecs * 1000 + xtal_nsecs / 2) / xtal_nsecs;
2729
2730 if (divider < 100) /* Don't allow shorter intervals than about 1ms */
2731 divider = 100;
2732
2733 if (divider > 65535) /* Overflow check */
2734 divider = 65535;
2735
2736 ad_write(devc, 21, (divider >> 8) & 0xff); /* Set upper bits */
2737 ad_write(devc, 20, divider & 0xff); /* Set lower bits */
2738 ad_write(devc, 16, ad_read(devc, 16) | 0x40); /* Start the timer */
2739 devc->timer_running = 1;
2740 spin_unlock_irqrestore(&devc->lock,flags);
2741
2742 return current_interval = (divider * xtal_nsecs + 500) / 1000;
2743}
2744
2745static void ad1848_tmr_reprogram(int dev)
2746{
2747 /*
2748 * Audio driver has changed sampling rate so that a different xtal
2749 * oscillator was selected. We have to reprogram the timer rate.
2750 */
2751
2752 ad1848_tmr_start(dev, current_interval);
2753 sound_timer_syncinterval(current_interval);
2754}
2755
2756static void ad1848_tmr_disable(int dev)
2757{
2758 unsigned long flags;
2759 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
2760
2761 spin_lock_irqsave(&devc->lock,flags);
2762 ad_write(devc, 16, ad_read(devc, 16) & ~0x40);
2763 devc->timer_running = 0;
2764 spin_unlock_irqrestore(&devc->lock,flags);
2765}
2766
2767static void ad1848_tmr_restart(int dev)
2768{
2769 unsigned long flags;
2770 ad1848_info *devc = (ad1848_info *) audio_devs[dev]->devc;
2771
2772 if (current_interval == 0)
2773 return;
2774
2775 spin_lock_irqsave(&devc->lock,flags);
2776 ad_write(devc, 16, ad_read(devc, 16) | 0x40);
2777 devc->timer_running = 1;
2778 spin_unlock_irqrestore(&devc->lock,flags);
2779}
2780
2781static struct sound_lowlev_timer ad1848_tmr =
2782{
2783 0,
2784 2,
2785 ad1848_tmr_start,
2786 ad1848_tmr_disable,
2787 ad1848_tmr_restart
2788};
2789
2790static int ad1848_tmr_install(int dev)
2791{
2792 if (timer_installed != -1)
2793 return 0; /* Don't install another timer */
2794
2795 timer_installed = ad1848_tmr.dev = dev;
2796 sound_timer_init(&ad1848_tmr, audio_devs[dev]->name);
2797
2798 return 1;
2799}
2800#endif /* EXCLUDE_TIMERS */
2801
Linus Torvalds1da177e2005-04-16 15:20:36 -07002802EXPORT_SYMBOL(ad1848_detect);
2803EXPORT_SYMBOL(ad1848_init);
2804EXPORT_SYMBOL(ad1848_unload);
2805EXPORT_SYMBOL(ad1848_control);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002806EXPORT_SYMBOL(probe_ms_sound);
2807EXPORT_SYMBOL(attach_ms_sound);
2808EXPORT_SYMBOL(unload_ms_sound);
2809
2810static int __initdata io = -1;
2811static int __initdata irq = -1;
2812static int __initdata dma = -1;
2813static int __initdata dma2 = -1;
2814static int __initdata type = 0;
2815
2816module_param(io, int, 0); /* I/O for a raw AD1848 card */
2817module_param(irq, int, 0); /* IRQ to use */
2818module_param(dma, int, 0); /* First DMA channel */
2819module_param(dma2, int, 0); /* Second DMA channel */
2820module_param(type, int, 0); /* Card type */
2821module_param(deskpro_xl, bool, 0); /* Special magic for Deskpro XL boxen */
2822module_param(deskpro_m, bool, 0); /* Special magic for Deskpro M box */
2823module_param(soundpro, bool, 0); /* More special magic for SoundPro chips */
2824
2825#ifdef CONFIG_PNP
2826module_param(isapnp, int, 0);
2827module_param(isapnpjump, int, 0);
2828module_param(reverse, bool, 0);
2829MODULE_PARM_DESC(isapnp, "When set to 0, Plug & Play support will be disabled");
2830MODULE_PARM_DESC(isapnpjump, "Jumps to a specific slot in the driver's PnP table. Use the source, Luke.");
2831MODULE_PARM_DESC(reverse, "When set to 1, will reverse ISAPnP search order");
2832
2833static struct pnp_dev *ad1848_dev = NULL;
2834
2835/* Please add new entries at the end of the table */
2836static struct {
2837 char *name;
2838 unsigned short card_vendor, card_device,
2839 vendor, function;
2840 short mss_io, irq, dma, dma2; /* index into isapnp table */
2841 int type;
2842} ad1848_isapnp_list[] __initdata = {
2843 {"CMI 8330 SoundPRO",
2844 ISAPNP_VENDOR('C','M','I'), ISAPNP_DEVICE(0x0001),
2845 ISAPNP_VENDOR('@','@','@'), ISAPNP_FUNCTION(0x0001),
2846 0, 0, 0,-1, 0},
2847 {"CS4232 based card",
2848 ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2849 ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0000),
2850 0, 0, 0, 1, 0},
2851 {"CS4232 based card",
2852 ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2853 ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100),
2854 0, 0, 0, 1, 0},
2855 {"OPL3-SA2 WSS mode",
2856 ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2857 ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021),
2858 1, 0, 0, 1, 1},
2859 {"Advanced Gravis InterWave Audio",
2860 ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001),
2861 ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000),
2862 0, 0, 0, 1, 0},
2863 {NULL}
2864};
2865
2866static struct isapnp_device_id id_table[] __devinitdata = {
2867 { ISAPNP_VENDOR('C','M','I'), ISAPNP_DEVICE(0x0001),
2868 ISAPNP_VENDOR('@','@','@'), ISAPNP_FUNCTION(0x0001), 0 },
2869 { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2870 ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0000), 0 },
2871 { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2872 ISAPNP_VENDOR('C','S','C'), ISAPNP_FUNCTION(0x0100), 0 },
2873 /* The main driver for this card is opl3sa2
2874 { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
2875 ISAPNP_VENDOR('Y','M','H'), ISAPNP_FUNCTION(0x0021), 0 },
2876 */
2877 { ISAPNP_VENDOR('G','R','V'), ISAPNP_DEVICE(0x0001),
2878 ISAPNP_VENDOR('G','R','V'), ISAPNP_FUNCTION(0x0000), 0 },
2879 {0}
2880};
2881
2882MODULE_DEVICE_TABLE(isapnp, id_table);
2883
2884static struct pnp_dev *activate_dev(char *devname, char *resname, struct pnp_dev *dev)
2885{
2886 int err;
2887
2888 err = pnp_device_attach(dev);
2889 if (err < 0)
2890 return(NULL);
2891
2892 if((err = pnp_activate_dev(dev)) < 0) {
2893 printk(KERN_ERR "ad1848: %s %s config failed (out of resources?)[%d]\n", devname, resname, err);
2894
2895 pnp_device_detach(dev);
2896
2897 return(NULL);
2898 }
2899 audio_activated = 1;
2900 return(dev);
2901}
2902
Andrew Mortonb307e852006-05-20 15:00:36 -07002903static struct pnp_dev __init *ad1848_init_generic(struct pnp_card *bus,
2904 struct address_info *hw_config, int slot)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002905{
2906
2907 /* Configure Audio device */
2908 if((ad1848_dev = pnp_find_dev(bus, ad1848_isapnp_list[slot].vendor, ad1848_isapnp_list[slot].function, NULL)))
2909 {
2910 if((ad1848_dev = activate_dev(ad1848_isapnp_list[slot].name, "ad1848", ad1848_dev)))
2911 {
2912 hw_config->io_base = pnp_port_start(ad1848_dev, ad1848_isapnp_list[slot].mss_io);
2913 hw_config->irq = pnp_irq(ad1848_dev, ad1848_isapnp_list[slot].irq);
2914 hw_config->dma = pnp_dma(ad1848_dev, ad1848_isapnp_list[slot].dma);
2915 if(ad1848_isapnp_list[slot].dma2 != -1)
2916 hw_config->dma2 = pnp_dma(ad1848_dev, ad1848_isapnp_list[slot].dma2);
2917 else
2918 hw_config->dma2 = -1;
2919 hw_config->card_subtype = ad1848_isapnp_list[slot].type;
2920 } else
2921 return(NULL);
2922 } else
2923 return(NULL);
2924
2925 return(ad1848_dev);
2926}
2927
2928static int __init ad1848_isapnp_init(struct address_info *hw_config, struct pnp_card *bus, int slot)
2929{
2930 char *busname = bus->name[0] ? bus->name : ad1848_isapnp_list[slot].name;
2931
2932 /* Initialize this baby. */
2933
2934 if(ad1848_init_generic(bus, hw_config, slot)) {
2935 /* We got it. */
2936
2937 printk(KERN_NOTICE "ad1848: PnP reports '%s' at i/o %#x, irq %d, dma %d, %d\n",
2938 busname,
2939 hw_config->io_base, hw_config->irq, hw_config->dma,
2940 hw_config->dma2);
2941 return 1;
2942 }
2943 return 0;
2944}
2945
2946static int __init ad1848_isapnp_probe(struct address_info *hw_config)
2947{
2948 static int first = 1;
2949 int i;
2950
2951 /* Count entries in sb_isapnp_list */
2952 for (i = 0; ad1848_isapnp_list[i].card_vendor != 0; i++);
2953 i--;
2954
2955 /* Check and adjust isapnpjump */
2956 if( isapnpjump < 0 || isapnpjump > i) {
2957 isapnpjump = reverse ? i : 0;
2958 printk(KERN_ERR "ad1848: Valid range for isapnpjump is 0-%d. Adjusted to %d.\n", i, isapnpjump);
2959 }
2960
2961 if(!first || !reverse)
2962 i = isapnpjump;
2963 first = 0;
2964 while(ad1848_isapnp_list[i].card_vendor != 0) {
2965 static struct pnp_card *bus = NULL;
2966
2967 while ((bus = pnp_find_card(
2968 ad1848_isapnp_list[i].card_vendor,
2969 ad1848_isapnp_list[i].card_device,
2970 bus))) {
2971
2972 if(ad1848_isapnp_init(hw_config, bus, i)) {
2973 isapnpjump = i; /* start next search from here */
2974 return 0;
2975 }
2976 }
2977 i += reverse ? -1 : 1;
2978 }
2979
2980 return -ENODEV;
2981}
2982#endif
2983
2984
2985static int __init init_ad1848(void)
2986{
2987 printk(KERN_INFO "ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996\n");
2988
2989#ifdef CONFIG_PNP
2990 if(isapnp && (ad1848_isapnp_probe(&cfg) < 0) ) {
2991 printk(KERN_NOTICE "ad1848: No ISAPnP cards found, trying standard ones...\n");
2992 isapnp = 0;
2993 }
2994#endif
2995
2996 if(io != -1) {
2997 struct resource *ports;
2998 if( isapnp == 0 )
2999 {
3000 if(irq == -1 || dma == -1) {
3001 printk(KERN_WARNING "ad1848: must give I/O , IRQ and DMA.\n");
3002 return -EINVAL;
3003 }
3004
3005 cfg.irq = irq;
3006 cfg.io_base = io;
3007 cfg.dma = dma;
3008 cfg.dma2 = dma2;
3009 cfg.card_subtype = type;
3010 }
3011
3012 ports = request_region(io + 4, 4, "ad1848");
3013
3014 if (!ports)
3015 return -EBUSY;
3016
3017 if (!request_region(io, 4, "WSS config")) {
3018 release_region(io + 4, 4);
3019 return -EBUSY;
3020 }
3021
3022 if (!probe_ms_sound(&cfg, ports)) {
3023 release_region(io + 4, 4);
3024 release_region(io, 4);
3025 return -ENODEV;
3026 }
3027 attach_ms_sound(&cfg, ports, THIS_MODULE);
3028 loaded = 1;
3029 }
3030 return 0;
3031}
3032
3033static void __exit cleanup_ad1848(void)
3034{
3035 if(loaded)
3036 unload_ms_sound(&cfg);
3037
3038#ifdef CONFIG_PNP
3039 if(ad1848_dev){
3040 if(audio_activated)
3041 pnp_device_detach(ad1848_dev);
3042 }
3043#endif
3044}
3045
3046module_init(init_ad1848);
3047module_exit(cleanup_ad1848);
3048
3049#ifndef MODULE
3050static int __init setup_ad1848(char *str)
3051{
3052 /* io, irq, dma, dma2, type */
3053 int ints[6];
3054
3055 str = get_options(str, ARRAY_SIZE(ints), ints);
3056
3057 io = ints[1];
3058 irq = ints[2];
3059 dma = ints[3];
3060 dma2 = ints[4];
3061 type = ints[5];
3062
3063 return 1;
3064}
3065
3066__setup("ad1848=", setup_ad1848);
3067#endif
3068MODULE_LICENSE("GPL");