blob: 4cd13ab6496b0c44874a6990e0b6c85da16e0340 [file] [log] [blame]
Kukjin Kim09ec1d72013-01-31 16:54:38 -08001/*
Ben Dooksccae9412009-11-13 22:54:14 +00002 * Copyright (c) 2006-2009 Simtec Electronics
Ben Dooks831a6fc2009-07-30 23:23:26 +01003 * http://armlinux.simtec.co.uk/
4 * Ben Dooks <ben@simtec.co.uk>
5 *
6 * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11*/
12
13#include <linux/init.h>
14#include <linux/kernel.h>
15#include <linux/errno.h>
16#include <linux/cpufreq.h>
Ben Dookse6d197a2009-07-30 23:23:42 +010017#include <linux/seq_file.h>
Ben Dooks831a6fc2009-07-30 23:23:26 +010018#include <linux/io.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090019#include <linux/slab.h>
Ben Dooks831a6fc2009-07-30 23:23:26 +010020
21#include <mach/map.h>
Ben Dooks831a6fc2009-07-30 23:23:26 +010022#include <mach/regs-clock.h>
23
24#include <plat/cpu-freq-core.h>
25
Kukjin Kim37c3adc2013-02-03 17:00:11 -080026#include "regs-mem.h"
27
Ben Dooks831a6fc2009-07-30 23:23:26 +010028#define print_ns(x) ((x) / 10), ((x) % 10)
29
30/**
31 * s3c2410_print_timing - print bank timing data for debug purposes
32 * @pfx: The prefix to put on the output
33 * @timings: The timing inforamtion to print.
34*/
35static void s3c2410_print_timing(const char *pfx,
36 struct s3c_iotimings *timings)
37{
38 struct s3c2410_iobank_timing *bt;
39 int bank;
40
41 for (bank = 0; bank < MAX_BANKS; bank++) {
42 bt = timings->bank[bank].io_2410;
43 if (!bt)
44 continue;
45
46 printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
47 "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
48 print_ns(bt->tacs),
49 print_ns(bt->tcos),
50 print_ns(bt->tacc),
51 print_ns(bt->tcoh),
52 print_ns(bt->tcah));
53 }
54}
55
56/**
57 * bank_reg - convert bank number to pointer to the control register.
58 * @bank: The IO bank number.
59 */
60static inline void __iomem *bank_reg(unsigned int bank)
61{
62 return S3C2410_BANKCON0 + (bank << 2);
63}
64
65/**
66 * bank_is_io - test whether bank is used for IO
67 * @bankcon: The bank control register.
68 *
69 * This is a simplistic test to see if any BANKCON[x] is not an IO
70 * bank. It currently does not take into account whether BWSCON has
71 * an illegal width-setting in it, or if the pin connected to nCS[x]
72 * is actually being handled as a chip-select.
73 */
74static inline int bank_is_io(unsigned long bankcon)
75{
76 return !(bankcon & S3C2410_BANKCON_SDRAM);
77}
78
79/**
80 * to_div - convert cycle time to divisor
81 * @cyc: The cycle time, in 10ths of nanoseconds.
82 * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
83 *
84 * Convert the given cycle time into the divisor to use to obtain it from
85 * HCLK.
86*/
87static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
88{
89 if (cyc == 0)
90 return 0;
91
92 return DIV_ROUND_UP(cyc, hclk_tns);
93}
94
95/**
96 * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
97 * @cyc: The cycle time, in 10ths of nanoseconds.
98 * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
99 * @v: Pointer to register to alter.
100 * @shift: The shift to get to the control bits.
101 *
102 * Calculate the divisor, and turn it into the correct control bits to
103 * set in the result, @v.
104 */
105static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
106 unsigned long *v, int shift)
107{
108 unsigned int div = to_div(cyc, hclk_tns);
109 unsigned long val;
110
111 s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
112 __func__, cyc, hclk_tns, shift, div);
113
114 switch (div) {
115 case 0:
116 val = 0;
117 break;
118 case 1:
119 val = 1;
120 break;
121 case 2:
122 val = 2;
123 break;
124 case 3:
125 case 4:
126 val = 3;
127 break;
128 default:
129 return -1;
130 }
131
132 *v |= val << shift;
133 return 0;
134}
135
136int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
137{
138 /* Currently no support for Tacp calculations. */
139 return 0;
140}
141
142/**
143 * calc_tacc - calculate divisor control for tacc.
144 * @cyc: The cycle time, in 10ths of nanoseconds.
145 * @nwait_en: IS nWAIT enabled for this bank.
146 * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
147 * @v: Pointer to register to alter.
148 *
149 * Calculate the divisor control for tACC, taking into account whether
150 * the bank has nWAIT enabled. The result is used to modify the value
151 * pointed to by @v.
152*/
153static int calc_tacc(unsigned int cyc, int nwait_en,
154 unsigned long hclk_tns, unsigned long *v)
155{
156 unsigned int div = to_div(cyc, hclk_tns);
157 unsigned long val;
158
159 s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
160 __func__, cyc, nwait_en, hclk_tns, div);
161
162 /* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
163 if (nwait_en && div < 4)
164 div = 4;
165
166 switch (div) {
167 case 0:
168 val = 0;
169 break;
170
171 case 1:
172 case 2:
173 case 3:
174 case 4:
175 val = div - 1;
176 break;
177
178 case 5:
179 case 6:
180 val = 4;
181 break;
182
183 case 7:
184 case 8:
185 val = 5;
186 break;
187
188 case 9:
189 case 10:
190 val = 6;
191 break;
192
193 case 11:
194 case 12:
195 case 13:
196 case 14:
197 val = 7;
198 break;
199
200 default:
201 return -1;
202 }
203
204 *v |= val << 8;
205 return 0;
206}
207
208/**
209 * s3c2410_calc_bank - calculate bank timing infromation
210 * @cfg: The configuration we need to calculate for.
211 * @bt: The bank timing information.
212 *
213 * Given the cycle timine for a bank @bt, calculate the new BANKCON
214 * setting for the @cfg timing. This updates the timing information
215 * ready for the cpu frequency change.
216 */
217static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
218 struct s3c2410_iobank_timing *bt)
219{
220 unsigned long hclk = cfg->freq.hclk_tns;
221 unsigned long res;
222 int ret;
223
224 res = bt->bankcon;
225 res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
226
227 /* tacp: 2,3,4,5 */
228 /* tcah: 0,1,2,4 */
229 /* tcoh: 0,1,2,4 */
230 /* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
231 /* tcos: 0,1,2,4 */
232 /* tacs: 0,1,2,4 */
233
234 ret = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
235 ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
236 ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
237 ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
238
239 if (ret)
240 return -EINVAL;
241
242 ret |= calc_tacp(bt->tacp, hclk, &res);
243 ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
244
245 if (ret)
246 return -EINVAL;
247
248 bt->bankcon = res;
249 return 0;
250}
251
252static unsigned int tacc_tab[] = {
253 [0] = 1,
254 [1] = 2,
255 [2] = 3,
256 [3] = 4,
257 [4] = 6,
258 [5] = 9,
259 [6] = 10,
260 [7] = 14,
261};
262
263/**
264 * get_tacc - turn tACC value into cycle time
265 * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
266 * @val: The bank timing register value, shifed down.
267 */
268static unsigned int get_tacc(unsigned long hclk_tns,
269 unsigned long val)
270{
271 val &= 7;
272 return hclk_tns * tacc_tab[val];
273}
274
275/**
276 * get_0124 - turn 0/1/2/4 divider into cycle time
277 * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
278 * @val: The bank timing register value, shifed down.
279 */
280static unsigned int get_0124(unsigned long hclk_tns,
281 unsigned long val)
282{
283 val &= 3;
284 return hclk_tns * ((val == 3) ? 4 : val);
285}
286
287/**
288 * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
289 * @cfg: The frequency configuration
290 * @bt: The bank timing to fill in (uses cached BANKCON)
291 *
292 * Given the BANKCON setting in @bt and the current frequency settings
293 * in @cfg, update the cycle timing information.
294 */
295void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
296 struct s3c2410_iobank_timing *bt)
297{
298 unsigned long bankcon = bt->bankcon;
299 unsigned long hclk = cfg->freq.hclk_tns;
300
301 bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
302 bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
303 bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
304 bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
305 bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
306}
307
308/**
Ben Dookse6d197a2009-07-30 23:23:42 +0100309 * s3c2410_iotiming_debugfs - debugfs show io bank timing information
310 * @seq: The seq_file to write output to using seq_printf().
311 * @cfg: The current configuration.
312 * @iob: The IO bank information to decode.
313 */
314void s3c2410_iotiming_debugfs(struct seq_file *seq,
315 struct s3c_cpufreq_config *cfg,
316 union s3c_iobank *iob)
317{
318 struct s3c2410_iobank_timing *bt = iob->io_2410;
319 unsigned long bankcon = bt->bankcon;
320 unsigned long hclk = cfg->freq.hclk_tns;
321 unsigned int tacs;
322 unsigned int tcos;
323 unsigned int tacc;
324 unsigned int tcoh;
325 unsigned int tcah;
326
327 seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
328
329 tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
330 tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
331 tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
332 tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
333 tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
334
335 seq_printf(seq,
336 "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
337 print_ns(bt->tacs),
338 print_ns(bt->tcos),
339 print_ns(bt->tacc),
340 print_ns(bt->tcoh),
341 print_ns(bt->tcah));
342
343 seq_printf(seq,
344 "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
345 print_ns(tacs),
346 print_ns(tcos),
347 print_ns(tacc),
348 print_ns(tcoh),
349 print_ns(tcah));
350}
351
352/**
Ben Dooks831a6fc2009-07-30 23:23:26 +0100353 * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
354 * @cfg: The frequency configuration
355 * @iot: The IO timing information to fill out.
356 *
357 * Calculate the new values for the banks in @iot based on the new
358 * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
359 * to update the timing when necessary.
360 */
361int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
362 struct s3c_iotimings *iot)
363{
364 struct s3c2410_iobank_timing *bt;
365 unsigned long bankcon;
366 int bank;
367 int ret;
368
369 for (bank = 0; bank < MAX_BANKS; bank++) {
370 bankcon = __raw_readl(bank_reg(bank));
371 bt = iot->bank[bank].io_2410;
372
373 if (!bt)
374 continue;
375
376 bt->bankcon = bankcon;
377
378 ret = s3c2410_calc_bank(cfg, bt);
379 if (ret) {
380 printk(KERN_ERR "%s: cannot calculate bank %d io\n",
381 __func__, bank);
382 goto err;
383 }
384
385 s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
386 __func__, bank, bt->bankcon);
387 }
388
389 return 0;
390 err:
391 return ret;
392}
393
394/**
395 * s3c2410_iotiming_set - set the IO timings from the given setup.
396 * @cfg: The frequency configuration
397 * @iot: The IO timing information to use.
398 *
399 * Set all the currently used IO bank timing information generated
400 * by s3c2410_iotiming_calc() once the core has validated that all
401 * the new values are within permitted bounds.
402 */
403void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
404 struct s3c_iotimings *iot)
405{
406 struct s3c2410_iobank_timing *bt;
407 int bank;
408
409 /* set the io timings from the specifier */
410
411 for (bank = 0; bank < MAX_BANKS; bank++) {
412 bt = iot->bank[bank].io_2410;
413 if (!bt)
414 continue;
415
416 __raw_writel(bt->bankcon, bank_reg(bank));
417 }
418}
419
420/**
421 * s3c2410_iotiming_get - Get the timing information from current registers.
422 * @cfg: The frequency configuration
423 * @timings: The IO timing information to fill out.
424 *
425 * Calculate the @timings timing information from the current frequency
426 * information in @cfg, and the new frequency configur
427 * through all the IO banks, reading the state and then updating @iot
428 * as necessary.
429 *
430 * This is used at the moment on initialisation to get the current
431 * configuration so that boards do not have to carry their own setup
432 * if the timings are correct on initialisation.
433 */
434
435int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
436 struct s3c_iotimings *timings)
437{
438 struct s3c2410_iobank_timing *bt;
439 unsigned long bankcon;
440 unsigned long bwscon;
441 int bank;
442
443 bwscon = __raw_readl(S3C2410_BWSCON);
444
445 /* look through all banks to see what is currently set. */
446
447 for (bank = 0; bank < MAX_BANKS; bank++) {
448 bankcon = __raw_readl(bank_reg(bank));
449
450 if (!bank_is_io(bankcon))
451 continue;
452
453 s3c_freq_iodbg("%s: bank %d: con %08lx\n",
454 __func__, bank, bankcon);
455
456 bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
457 if (!bt) {
458 printk(KERN_ERR "%s: no memory for bank\n", __func__);
459 return -ENOMEM;
460 }
461
462 /* find out in nWait is enabled for bank. */
463
464 if (bank != 0) {
465 unsigned long tmp = S3C2410_BWSCON_GET(bwscon, bank);
466 if (tmp & S3C2410_BWSCON_WS)
467 bt->nwait_en = 1;
468 }
469
470 timings->bank[bank].io_2410 = bt;
471 bt->bankcon = bankcon;
472
473 s3c2410_iotiming_getbank(cfg, bt);
474 }
475
476 s3c2410_print_timing("get", timings);
477 return 0;
478}