blob: ab2e7a198a4cfedfc0bb99249ec597d26333db5b [file] [log] [blame]
Jonas Bonn61e85e32011-06-04 11:06:11 +03001/*
2 * OpenRISC Linux
3 *
4 * Linux architectural port borrowing liberally from similar works of
5 * others. All original copyrights apply as per the original source
6 * declaration.
7 *
8 * OpenRISC implementation:
9 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
10 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
11 * et al.
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 */
18
19#ifndef __ASM_OPENRISC_UACCESS_H
20#define __ASM_OPENRISC_UACCESS_H
21
22/*
23 * User space memory access functions
24 */
25#include <linux/errno.h>
26#include <linux/thread_info.h>
27#include <linux/prefetch.h>
28#include <linux/string.h>
Jonas Bonn61e85e32011-06-04 11:06:11 +030029#include <asm/page.h>
30
31#define VERIFY_READ 0
32#define VERIFY_WRITE 1
33
34/*
35 * The fs value determines whether argument validity checking should be
36 * performed or not. If get_fs() == USER_DS, checking is performed, with
37 * get_fs() == KERNEL_DS, checking is bypassed.
38 *
39 * For historical reasons, these macros are grossly misnamed.
40 */
41
42/* addr_limit is the maximum accessible address for the task. we misuse
43 * the KERNEL_DS and USER_DS values to both assign and compare the
44 * addr_limit values through the equally misnamed get/set_fs macros.
45 * (see above)
46 */
47
48#define KERNEL_DS (~0UL)
49#define get_ds() (KERNEL_DS)
50
51#define USER_DS (TASK_SIZE)
52#define get_fs() (current_thread_info()->addr_limit)
53#define set_fs(x) (current_thread_info()->addr_limit = (x))
54
55#define segment_eq(a, b) ((a) == (b))
56
57/* Ensure that the range from addr to addr+size is all within the process'
58 * address space
59 */
60#define __range_ok(addr, size) (size <= get_fs() && addr <= (get_fs()-size))
61
62/* Ensure that addr is below task's addr_limit */
63#define __addr_ok(addr) ((unsigned long) addr < get_fs())
64
65#define access_ok(type, addr, size) \
66 __range_ok((unsigned long)addr, (unsigned long)size)
67
68/*
69 * The exception table consists of pairs of addresses: the first is the
70 * address of an instruction that is allowed to fault, and the second is
71 * the address at which the program should continue. No registers are
72 * modified, so it is entirely up to the continuation code to figure out
73 * what to do.
74 *
75 * All the routines below use bits of fixup code that are out of line
76 * with the main instruction path. This means when everything is well,
77 * we don't even have to jump over them. Further, they do not intrude
78 * on our cache or tlb entries.
79 */
80
81struct exception_table_entry {
82 unsigned long insn, fixup;
83};
84
85/* Returns 0 if exception not found and fixup otherwise. */
86extern unsigned long search_exception_table(unsigned long);
87extern void sort_exception_table(void);
88
89/*
90 * These are the main single-value transfer routines. They automatically
91 * use the right size if we just have the right pointer type.
92 *
93 * This gets kind of ugly. We want to return _two_ values in "get_user()"
94 * and yet we don't want to do any pointers, because that is too much
95 * of a performance impact. Thus we have a few rather ugly macros here,
96 * and hide all the uglyness from the user.
97 *
98 * The "__xxx" versions of the user access functions are versions that
99 * do not verify the address space, that must have been done previously
100 * with a separate "access_ok()" call (this is used when we do multiple
101 * accesses to the same area of user memory).
102 *
103 * As we use the same address space for kernel and user data on the
104 * PowerPC, we can just do these as direct assignments. (Of course, the
105 * exception handling means that it's no longer "just"...)
106 */
107#define get_user(x, ptr) \
108 __get_user_check((x), (ptr), sizeof(*(ptr)))
109#define put_user(x, ptr) \
110 __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
111
112#define __get_user(x, ptr) \
113 __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
114#define __put_user(x, ptr) \
115 __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
116
117extern long __put_user_bad(void);
118
119#define __put_user_nocheck(x, ptr, size) \
120({ \
121 long __pu_err; \
122 __put_user_size((x), (ptr), (size), __pu_err); \
123 __pu_err; \
124})
125
126#define __put_user_check(x, ptr, size) \
127({ \
128 long __pu_err = -EFAULT; \
129 __typeof__(*(ptr)) *__pu_addr = (ptr); \
130 if (access_ok(VERIFY_WRITE, __pu_addr, size)) \
131 __put_user_size((x), __pu_addr, (size), __pu_err); \
132 __pu_err; \
133})
134
135#define __put_user_size(x, ptr, size, retval) \
136do { \
137 retval = 0; \
138 switch (size) { \
139 case 1: __put_user_asm(x, ptr, retval, "l.sb"); break; \
140 case 2: __put_user_asm(x, ptr, retval, "l.sh"); break; \
141 case 4: __put_user_asm(x, ptr, retval, "l.sw"); break; \
142 case 8: __put_user_asm2(x, ptr, retval); break; \
143 default: __put_user_bad(); \
144 } \
145} while (0)
146
147struct __large_struct {
148 unsigned long buf[100];
149};
150#define __m(x) (*(struct __large_struct *)(x))
151
152/*
153 * We don't tell gcc that we are accessing memory, but this is OK
154 * because we do not write to any memory gcc knows about, so there
155 * are no aliasing issues.
156 */
157#define __put_user_asm(x, addr, err, op) \
158 __asm__ __volatile__( \
159 "1: "op" 0(%2),%1\n" \
160 "2:\n" \
161 ".section .fixup,\"ax\"\n" \
162 "3: l.addi %0,r0,%3\n" \
163 " l.j 2b\n" \
164 " l.nop\n" \
165 ".previous\n" \
166 ".section __ex_table,\"a\"\n" \
167 " .align 2\n" \
168 " .long 1b,3b\n" \
169 ".previous" \
170 : "=r"(err) \
171 : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err))
172
173#define __put_user_asm2(x, addr, err) \
174 __asm__ __volatile__( \
175 "1: l.sw 0(%2),%1\n" \
176 "2: l.sw 4(%2),%H1\n" \
177 "3:\n" \
178 ".section .fixup,\"ax\"\n" \
179 "4: l.addi %0,r0,%3\n" \
180 " l.j 3b\n" \
181 " l.nop\n" \
182 ".previous\n" \
183 ".section __ex_table,\"a\"\n" \
184 " .align 2\n" \
185 " .long 1b,4b\n" \
186 " .long 2b,4b\n" \
187 ".previous" \
188 : "=r"(err) \
189 : "r"(x), "r"(addr), "i"(-EFAULT), "0"(err))
190
191#define __get_user_nocheck(x, ptr, size) \
192({ \
193 long __gu_err, __gu_val; \
194 __get_user_size(__gu_val, (ptr), (size), __gu_err); \
195 (x) = (__typeof__(*(ptr)))__gu_val; \
196 __gu_err; \
197})
198
199#define __get_user_check(x, ptr, size) \
200({ \
201 long __gu_err = -EFAULT, __gu_val = 0; \
202 const __typeof__(*(ptr)) * __gu_addr = (ptr); \
203 if (access_ok(VERIFY_READ, __gu_addr, size)) \
204 __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
205 (x) = (__typeof__(*(ptr)))__gu_val; \
206 __gu_err; \
207})
208
209extern long __get_user_bad(void);
210
211#define __get_user_size(x, ptr, size, retval) \
212do { \
213 retval = 0; \
214 switch (size) { \
215 case 1: __get_user_asm(x, ptr, retval, "l.lbz"); break; \
216 case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break; \
217 case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break; \
218 case 8: __get_user_asm2(x, ptr, retval); \
219 default: (x) = __get_user_bad(); \
220 } \
221} while (0)
222
223#define __get_user_asm(x, addr, err, op) \
224 __asm__ __volatile__( \
225 "1: "op" %1,0(%2)\n" \
226 "2:\n" \
227 ".section .fixup,\"ax\"\n" \
228 "3: l.addi %0,r0,%3\n" \
229 " l.addi %1,r0,0\n" \
230 " l.j 2b\n" \
231 " l.nop\n" \
232 ".previous\n" \
233 ".section __ex_table,\"a\"\n" \
234 " .align 2\n" \
235 " .long 1b,3b\n" \
236 ".previous" \
237 : "=r"(err), "=r"(x) \
238 : "r"(addr), "i"(-EFAULT), "0"(err))
239
240#define __get_user_asm2(x, addr, err) \
241 __asm__ __volatile__( \
242 "1: l.lwz %1,0(%2)\n" \
243 "2: l.lwz %H1,4(%2)\n" \
244 "3:\n" \
245 ".section .fixup,\"ax\"\n" \
246 "4: l.addi %0,r0,%3\n" \
247 " l.addi %1,r0,0\n" \
248 " l.addi %H1,r0,0\n" \
249 " l.j 3b\n" \
250 " l.nop\n" \
251 ".previous\n" \
252 ".section __ex_table,\"a\"\n" \
253 " .align 2\n" \
254 " .long 1b,4b\n" \
255 " .long 2b,4b\n" \
256 ".previous" \
257 : "=r"(err), "=&r"(x) \
258 : "r"(addr), "i"(-EFAULT), "0"(err))
259
260/* more complex routines */
261
262extern unsigned long __must_check
263__copy_tofrom_user(void *to, const void *from, unsigned long size);
264
265#define __copy_from_user(to, from, size) \
266 __copy_tofrom_user(to, from, size)
267#define __copy_to_user(to, from, size) \
268 __copy_tofrom_user(to, from, size)
269
270#define __copy_to_user_inatomic __copy_to_user
271#define __copy_from_user_inatomic __copy_from_user
272
273static inline unsigned long
274copy_from_user(void *to, const void *from, unsigned long n)
275{
276 unsigned long over;
277
278 if (access_ok(VERIFY_READ, from, n))
279 return __copy_tofrom_user(to, from, n);
280 if ((unsigned long)from < TASK_SIZE) {
281 over = (unsigned long)from + n - TASK_SIZE;
282 return __copy_tofrom_user(to, from, n - over) + over;
283 }
284 return n;
285}
286
287static inline unsigned long
288copy_to_user(void *to, const void *from, unsigned long n)
289{
290 unsigned long over;
291
292 if (access_ok(VERIFY_WRITE, to, n))
293 return __copy_tofrom_user(to, from, n);
294 if ((unsigned long)to < TASK_SIZE) {
295 over = (unsigned long)to + n - TASK_SIZE;
296 return __copy_tofrom_user(to, from, n - over) + over;
297 }
298 return n;
299}
300
301extern unsigned long __clear_user(void *addr, unsigned long size);
302
303static inline __must_check unsigned long
304clear_user(void *addr, unsigned long size)
305{
306
307 if (access_ok(VERIFY_WRITE, addr, size))
308 return __clear_user(addr, size);
309 if ((unsigned long)addr < TASK_SIZE) {
310 unsigned long over = (unsigned long)addr + size - TASK_SIZE;
311 return __clear_user(addr, size - over) + over;
312 }
313 return size;
314}
315
Jonas Bonn603d6632012-05-25 08:24:49 +0200316#define user_addr_max() \
317 (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
Jonas Bonn61e85e32011-06-04 11:06:11 +0300318
Jonas Bonn603d6632012-05-25 08:24:49 +0200319extern long strncpy_from_user(char *dest, const char __user *src, long count);
Jonas Bonn61e85e32011-06-04 11:06:11 +0300320
Jonas Bonnb48b2c32012-05-27 10:25:47 +0200321extern __must_check long strlen_user(const char __user *str);
322extern __must_check long strnlen_user(const char __user *str, long n);
Jonas Bonn61e85e32011-06-04 11:06:11 +0300323
324#endif /* __ASM_OPENRISC_UACCESS_H */