Blame - arch/powerpc/platforms/8xx/Kconfig - kernel/msm-4.9

blob: bd28655043a0851a74ce3c0e679fc23d39a2bc05 [file] [log] [blame]

Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	1	config FADS
				2	bool
				3
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	4	config CPM1
				5	bool
Scott Wood	c374e00	2007-07-16 11:43:43 -0500	[diff] [blame]	6	select CPM
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	7
Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	8	choice
				9	prompt "8xx Machine Type"
Kumar Gala	c8a55f3	2007-04-12 17:35:54 -0500	[diff] [blame]	10	depends on PPC_8xx
Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	11	depends on 8xx
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	12	default MPC885ADS
Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	13
				14	config MPC8XXFADS
				15	bool "FADS"
				16	select FADS
				17
				18	config MPC86XADS
				19	bool "MPC86XADS"
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	20	select CPM1
Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	21	help
				22	MPC86x Application Development System by Freescale Semiconductor.
				23	The MPC86xADS is meant to serve as a platform for s/w and h/w
				24	development around the MPC86X processor families.
Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	25
				26	config MPC885ADS
				27	bool "MPC885ADS"
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	28	select CPM1
Scott Wood	20906ec	2007-09-14 14:38:16 -0500	[diff] [blame]	29	select PPC_CPM_NEW_BINDING
Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	30	help
				31	Freescale Semiconductor MPC885 Application Development System (ADS).
				32	Also known as DUET.
				33	The MPC885ADS is meant to serve as a platform for s/w and h/w
				34	development around the MPC885 processor family.
				35
Scott Wood	11c146c	2007-09-14 14:58:25 -0500	[diff] [blame^]	36	config PPC_EP88XC
				37	bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
				38	select CPM1
				39	select PPC_CPM_NEW_BINDING
				40	help
				41	This enables support for the Embedded Planet EP88xC board.
				42
				43	This board is also resold by Freescale as the QUICCStart
				44	MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
				45
Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	46	endchoice
				47
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	48	menu "Freescale Ethernet driver platform-specific options"
Kumar Gala	c8a55f3	2007-04-12 17:35:54 -0500	[diff] [blame]	49	depends on (FS_ENET && MPC885ADS)
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	50
Kumar Gala	c8a55f3	2007-04-12 17:35:54 -0500	[diff] [blame]	51	config MPC8xx_SECOND_ETH
				52	bool "Second Ethernet channel"
				53	depends on MPC885ADS
				54	default y
				55	help
				56	This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
				57	The latter will use SCC1, for 885ADS you can select it below.
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	58
Kumar Gala	c8a55f3	2007-04-12 17:35:54 -0500	[diff] [blame]	59	choice
				60	prompt "Second Ethernet channel"
				61	depends on MPC8xx_SECOND_ETH
				62	default MPC8xx_SECOND_ETH_FEC2
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	63
Kumar Gala	c8a55f3	2007-04-12 17:35:54 -0500	[diff] [blame]	64	config MPC8xx_SECOND_ETH_FEC2
				65	bool "FEC2"
				66	depends on MPC885ADS
				67	help
				68	Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
				69	(often 2-nd UART) will not work if this is enabled.
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	70
Kumar Gala	c8a55f3	2007-04-12 17:35:54 -0500	[diff] [blame]	71	config MPC8xx_SECOND_ETH_SCC3
				72	bool "SCC3"
				73	depends on MPC885ADS
				74	help
				75	Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
				76	(often 1-nd UART) will not work if this is enabled.
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	77
Kumar Gala	c8a55f3	2007-04-12 17:35:54 -0500	[diff] [blame]	78	endchoice
Vitaly Bordug	df34403	2007-01-24 22:41:42 +0300	[diff] [blame]	79
				80	endmenu
				81
Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	82	#
				83	# MPC8xx Communication options
				84	#
				85
				86	menu "MPC8xx CPM Options"
				87	depends on 8xx
				88
Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	89	# This doesn't really belong here, but it is convenient to ask
				90	# 8xx specific questions.
				91	comment "Generic MPC8xx Options"
				92
				93	config 8xx_COPYBACK
				94	bool "Copy-Back Data Cache (else Writethrough)"
				95	help
				96	Saying Y here will cause the cache on an MPC8xx processor to be used
				97	in Copy-Back mode. If you say N here, it is used in Writethrough
				98	mode.
				99
				100	If in doubt, say Y here.
				101
				102	config 8xx_CPU6
				103	bool "CPU6 Silicon Errata (860 Pre Rev. C)"
				104	help
				105	MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
				106	require workarounds for Linux (and most other OSes to work). If you
				107	get a BUG() very early in boot, this might fix the problem. For
				108	more details read the document entitled "MPC860 Family Device Errata
Kumar Gala	c8a55f3	2007-04-12 17:35:54 -0500	[diff] [blame]	109	Reference" on Freescale's website. This option also incurs a
Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	110	performance hit.
				111
				112	If in doubt, say N here.
				113
Scott Wood	7401685	2007-06-25 14:50:41 -0500	[diff] [blame]	114	config 8xx_CPU15
				115	bool "CPU15 Silicon Errata"
				116	default y
				117	help
				118	This enables a workaround for erratum CPU15 on MPC8xx chips.
				119	This bug can cause incorrect code execution under certain
				120	circumstances. This workaround adds some overhead (a TLB miss
				121	every time execution crosses a page boundary), and you may wish
				122	to disable it if you have worked around the bug in the compiler
				123	(by not placing conditional branches or branches to LR or CTR
				124	in the last word of a page, with a target of the last cache
				125	line in the next page), or if you have used some other
				126	workaround.
				127
				128	If in doubt, say Y here.
				129
Paul Mackerras	14cf11a	2005-09-26 16:04:21 +1000	[diff] [blame]	130	choice
				131	prompt "Microcode patch selection"
				132	default NO_UCODE_PATCH
				133	help
				134	Help not implemented yet, coming soon.
				135
				136	config NO_UCODE_PATCH
				137	bool "None"
				138
				139	config USB_SOF_UCODE_PATCH
				140	bool "USB SOF patch"
				141	help
				142	Help not implemented yet, coming soon.
				143
				144	config I2C_SPI_UCODE_PATCH
				145	bool "I2C/SPI relocation patch"
				146	help
				147	Help not implemented yet, coming soon.
				148
				149	config I2C_SPI_SMC1_UCODE_PATCH
				150	bool "I2C/SPI/SMC1 relocation patch"
				151	help
				152	Help not implemented yet, coming soon.
				153
				154	endchoice
				155
				156	config UCODE_PATCH
				157	bool
				158	default y
				159	depends on !NO_UCODE_PATCH
				160
				161	endmenu