blob: 369d2898ff9ecdfc452818235642ef5d6502a641 [file] [log] [blame]
Matt Roperc103d1c2014-04-01 15:22:35 -07001/*
2 * Copyright (C) 2014 Intel Corporation
3 *
4 * DRM universal plane helper functions
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a
7 * copy of this software and associated documentation files (the "Software"),
8 * to deal in the Software without restriction, including without limitation
9 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
10 * and/or sell copies of the Software, and to permit persons to whom the
11 * Software is furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice (including the next
14 * paragraph) shall be included in all copies or substantial portions of the
15 * Software.
16 *
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
23 * SOFTWARE.
24 */
25
26#include <linux/list.h>
27#include <drm/drmP.h>
Matt Roper7daf8d52014-05-29 08:06:52 -070028#include <drm/drm_plane_helper.h>
Matt Roperc103d1c2014-04-01 15:22:35 -070029#include <drm/drm_rect.h>
Daniel Vetter321ebf02014-11-04 22:57:27 +010030#include <drm/drm_atomic.h>
Daniel Vetteracf24a32014-07-29 15:33:05 +020031#include <drm/drm_crtc_helper.h>
Daniel Vetter321ebf02014-11-04 22:57:27 +010032#include <drm/drm_atomic_helper.h>
Matt Roperc103d1c2014-04-01 15:22:35 -070033
34#define SUBPIXEL_MASK 0xffff
35
Daniel Vetter3150c7d2014-11-06 20:53:29 +010036/**
37 * DOC: overview
38 *
39 * This helper library has two parts. The first part has support to implement
40 * primary plane support on top of the normal CRTC configuration interface.
41 * Since the legacy ->set_config interface ties the primary plane together with
42 * the CRTC state this does not allow userspace to disable the primary plane
43 * itself. To avoid too much duplicated code use
44 * drm_plane_helper_check_update() which can be used to enforce the same
45 * restrictions as primary planes had thus. The default primary plane only
46 * expose XRBG8888 and ARGB8888 as valid pixel formats for the attached
47 * framebuffer.
48 *
49 * Drivers are highly recommended to implement proper support for primary
50 * planes, and newly merged drivers must not rely upon these transitional
51 * helpers.
52 *
53 * The second part also implements transitional helpers which allow drivers to
54 * gradually switch to the atomic helper infrastructure for plane updates. Once
55 * that switch is complete drivers shouldn't use these any longer, instead using
56 * the proper legacy implementations for update and disable plane hooks provided
57 * by the atomic helpers.
58 *
59 * Again drivers are strongly urged to switch to the new interfaces.
Daniel Vetter092d01d2015-12-04 09:45:44 +010060 *
61 * The plane helpers share the function table structures with other helpers,
62 * specifically also the atomic helpers. See struct &drm_plane_helper_funcs for
63 * the details.
Daniel Vetter3150c7d2014-11-06 20:53:29 +010064 */
65
Matt Roperc103d1c2014-04-01 15:22:35 -070066/*
67 * This is the minimal list of formats that seem to be safe for modeset use
68 * with all current DRM drivers. Most hardware can actually support more
69 * formats than this and drivers may specify a more accurate list when
70 * creating the primary plane. However drivers that still call
71 * drm_plane_init() will use this minimal format list as the default.
72 */
Thierry Reding233fd4e2014-05-13 16:58:35 +020073static const uint32_t safe_modeset_formats[] = {
74 DRM_FORMAT_XRGB8888,
75 DRM_FORMAT_ARGB8888,
Matt Roperc103d1c2014-04-01 15:22:35 -070076};
77
78/*
79 * Returns the connectors currently associated with a CRTC. This function
80 * should be called twice: once with a NULL connector list to retrieve
81 * the list size, and once with the properly allocated list to be filled in.
82 */
83static int get_connectors_for_crtc(struct drm_crtc *crtc,
84 struct drm_connector **connector_list,
85 int num_connectors)
86{
87 struct drm_device *dev = crtc->dev;
88 struct drm_connector *connector;
89 int count = 0;
90
Daniel Vetter6e9f7982014-05-29 23:54:47 +020091 /*
92 * Note: Once we change the plane hooks to more fine-grained locking we
93 * need to grab the connection_mutex here to be able to make these
94 * checks.
95 */
Rob Clark51fd3712013-11-19 12:10:12 -050096 WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
Daniel Vetter6e9f7982014-05-29 23:54:47 +020097
Daniel Vetter9a9f5ce2015-07-09 23:44:34 +020098 drm_for_each_connector(connector, dev) {
Matt Roperc103d1c2014-04-01 15:22:35 -070099 if (connector->encoder && connector->encoder->crtc == crtc) {
100 if (connector_list != NULL && count < num_connectors)
101 *(connector_list++) = connector;
102
103 count++;
104 }
Daniel Vetter9a9f5ce2015-07-09 23:44:34 +0200105 }
Matt Roperc103d1c2014-04-01 15:22:35 -0700106
107 return count;
108}
109
110/**
Matt Roper7daf8d52014-05-29 08:06:52 -0700111 * drm_plane_helper_check_update() - Check plane update for validity
112 * @plane: plane object to update
113 * @crtc: owning CRTC of owning plane
114 * @fb: framebuffer to flip onto plane
115 * @src: source coordinates in 16.16 fixed point
116 * @dest: integer destination coordinates
117 * @clip: integer clipping coordinates
118 * @min_scale: minimum @src:@dest scaling factor in 16.16 fixed point
119 * @max_scale: maximum @src:@dest scaling factor in 16.16 fixed point
120 * @can_position: is it legal to position the plane such that it
121 * doesn't cover the entire crtc? This will generally
122 * only be false for primary planes.
123 * @can_update_disabled: can the plane be updated while the crtc
124 * is disabled?
125 * @visible: output parameter indicating whether plane is still visible after
126 * clipping
127 *
128 * Checks that a desired plane update is valid. Drivers that provide
129 * their own plane handling rather than helper-provided implementations may
130 * still wish to call this function to avoid duplication of error checking
131 * code.
132 *
133 * RETURNS:
134 * Zero if update appears valid, error code on failure
135 */
136int drm_plane_helper_check_update(struct drm_plane *plane,
137 struct drm_crtc *crtc,
138 struct drm_framebuffer *fb,
139 struct drm_rect *src,
140 struct drm_rect *dest,
141 const struct drm_rect *clip,
142 int min_scale,
143 int max_scale,
144 bool can_position,
145 bool can_update_disabled,
146 bool *visible)
147{
148 int hscale, vscale;
149
Matt Roper7432ca52014-12-11 07:20:57 -0800150 if (!fb) {
151 *visible = false;
152 return 0;
153 }
154
155 /* crtc should only be NULL when disabling (i.e., !fb) */
156 if (WARN_ON(!crtc)) {
157 *visible = false;
158 return 0;
159 }
160
Matt Roper7daf8d52014-05-29 08:06:52 -0700161 if (!crtc->enabled && !can_update_disabled) {
162 DRM_DEBUG_KMS("Cannot update plane of a disabled CRTC.\n");
163 return -EINVAL;
164 }
165
166 /* Check scaling */
167 hscale = drm_rect_calc_hscale(src, dest, min_scale, max_scale);
168 vscale = drm_rect_calc_vscale(src, dest, min_scale, max_scale);
169 if (hscale < 0 || vscale < 0) {
170 DRM_DEBUG_KMS("Invalid scaling of plane\n");
Ville Syrjäläf980a712015-11-16 17:02:37 +0200171 drm_rect_debug_print("src: ", src, true);
172 drm_rect_debug_print("dst: ", dest, false);
Matt Roper7daf8d52014-05-29 08:06:52 -0700173 return -ERANGE;
174 }
175
176 *visible = drm_rect_clip_scaled(src, dest, clip, hscale, vscale);
177 if (!*visible)
178 /*
179 * Plane isn't visible; some drivers can handle this
180 * so we just return success here. Drivers that can't
181 * (including those that use the primary plane helper's
182 * update function) will return an error from their
183 * update_plane handler.
184 */
185 return 0;
186
187 if (!can_position && !drm_rect_equals(dest, clip)) {
188 DRM_DEBUG_KMS("Plane must cover entire CRTC\n");
Ville Syrjäläf980a712015-11-16 17:02:37 +0200189 drm_rect_debug_print("dst: ", dest, false);
190 drm_rect_debug_print("clip: ", clip, false);
Matt Roper7daf8d52014-05-29 08:06:52 -0700191 return -EINVAL;
192 }
193
194 return 0;
195}
196EXPORT_SYMBOL(drm_plane_helper_check_update);
197
198/**
Matt Roperc103d1c2014-04-01 15:22:35 -0700199 * drm_primary_helper_update() - Helper for primary plane update
200 * @plane: plane object to update
201 * @crtc: owning CRTC of owning plane
202 * @fb: framebuffer to flip onto plane
203 * @crtc_x: x offset of primary plane on crtc
204 * @crtc_y: y offset of primary plane on crtc
205 * @crtc_w: width of primary plane rectangle on crtc
206 * @crtc_h: height of primary plane rectangle on crtc
207 * @src_x: x offset of @fb for panning
208 * @src_y: y offset of @fb for panning
209 * @src_w: width of source rectangle in @fb
210 * @src_h: height of source rectangle in @fb
211 *
212 * Provides a default plane update handler for primary planes. This is handler
213 * is called in response to a userspace SetPlane operation on the plane with a
214 * non-NULL framebuffer. We call the driver's modeset handler to update the
215 * framebuffer.
216 *
217 * SetPlane() on a primary plane of a disabled CRTC is not supported, and will
218 * return an error.
219 *
220 * Note that we make some assumptions about hardware limitations that may not be
221 * true for all hardware --
222 * 1) Primary plane cannot be repositioned.
223 * 2) Primary plane cannot be scaled.
224 * 3) Primary plane must cover the entire CRTC.
225 * 4) Subpixel positioning is not supported.
226 * Drivers for hardware that don't have these restrictions can provide their
227 * own implementation rather than using this helper.
228 *
229 * RETURNS:
230 * Zero on success, error code on failure
231 */
232int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
233 struct drm_framebuffer *fb,
234 int crtc_x, int crtc_y,
235 unsigned int crtc_w, unsigned int crtc_h,
236 uint32_t src_x, uint32_t src_y,
237 uint32_t src_w, uint32_t src_h)
238{
239 struct drm_mode_set set = {
240 .crtc = crtc,
241 .fb = fb,
242 .mode = &crtc->mode,
243 .x = src_x >> 16,
244 .y = src_y >> 16,
245 };
Matt Roper7daf8d52014-05-29 08:06:52 -0700246 struct drm_rect src = {
247 .x1 = src_x,
248 .y1 = src_y,
249 .x2 = src_x + src_w,
250 .y2 = src_y + src_h,
251 };
Matt Roperc103d1c2014-04-01 15:22:35 -0700252 struct drm_rect dest = {
253 .x1 = crtc_x,
254 .y1 = crtc_y,
255 .x2 = crtc_x + crtc_w,
256 .y2 = crtc_y + crtc_h,
257 };
Matt Roper7daf8d52014-05-29 08:06:52 -0700258 const struct drm_rect clip = {
Matt Roperc103d1c2014-04-01 15:22:35 -0700259 .x2 = crtc->mode.hdisplay,
260 .y2 = crtc->mode.vdisplay,
261 };
262 struct drm_connector **connector_list;
Matt Roperc103d1c2014-04-01 15:22:35 -0700263 int num_connectors, ret;
Matt Roper7daf8d52014-05-29 08:06:52 -0700264 bool visible;
Matt Roperc103d1c2014-04-01 15:22:35 -0700265
Matt Roper7daf8d52014-05-29 08:06:52 -0700266 ret = drm_plane_helper_check_update(plane, crtc, fb,
267 &src, &dest, &clip,
268 DRM_PLANE_HELPER_NO_SCALING,
269 DRM_PLANE_HELPER_NO_SCALING,
270 false, false, &visible);
Matt Roperc103d1c2014-04-01 15:22:35 -0700271 if (ret)
272 return ret;
273
Matt Roper7daf8d52014-05-29 08:06:52 -0700274 if (!visible)
275 /*
276 * Primary plane isn't visible. Note that unless a driver
277 * provides their own disable function, this will just
278 * wind up returning -EINVAL to userspace.
279 */
280 return plane->funcs->disable_plane(plane);
281
Matt Roperc103d1c2014-04-01 15:22:35 -0700282 /* Find current connectors for CRTC */
283 num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
284 BUG_ON(num_connectors == 0);
285 connector_list = kzalloc(num_connectors * sizeof(*connector_list),
286 GFP_KERNEL);
287 if (!connector_list)
288 return -ENOMEM;
289 get_connectors_for_crtc(crtc, connector_list, num_connectors);
290
291 set.connectors = connector_list;
292 set.num_connectors = num_connectors;
293
294 /*
Daniel Vetter0fe27f02014-04-23 17:34:06 +0200295 * We call set_config() directly here rather than using
Matt Roperc103d1c2014-04-01 15:22:35 -0700296 * drm_mode_set_config_internal. We're reprogramming the same
297 * connectors that were already in use, so we shouldn't need the extra
298 * cross-CRTC fb refcounting to accomodate stealing connectors.
299 * drm_mode_setplane() already handles the basic refcounting for the
300 * framebuffers involved in this operation.
301 */
Matt Roperc103d1c2014-04-01 15:22:35 -0700302 ret = crtc->funcs->set_config(&set);
Matt Roperc103d1c2014-04-01 15:22:35 -0700303
304 kfree(connector_list);
305 return ret;
306}
307EXPORT_SYMBOL(drm_primary_helper_update);
308
309/**
310 * drm_primary_helper_disable() - Helper for primary plane disable
311 * @plane: plane to disable
312 *
313 * Provides a default plane disable handler for primary planes. This is handler
314 * is called in response to a userspace SetPlane operation on the plane with a
Daniel Vetterb6ccd7b2014-04-15 10:02:43 +0200315 * NULL framebuffer parameter. It unconditionally fails the disable call with
316 * -EINVAL the only way to disable the primary plane without driver support is
317 * to disable the entier CRTC. Which does not match the plane ->disable hook.
Matt Roperc103d1c2014-04-01 15:22:35 -0700318 *
319 * Note that some hardware may be able to disable the primary plane without
320 * disabling the whole CRTC. Drivers for such hardware should provide their
321 * own disable handler that disables just the primary plane (and they'll likely
322 * need to provide their own update handler as well to properly re-enable a
323 * disabled primary plane).
324 *
325 * RETURNS:
Daniel Vetterb6ccd7b2014-04-15 10:02:43 +0200326 * Unconditionally returns -EINVAL.
Matt Roperc103d1c2014-04-01 15:22:35 -0700327 */
328int drm_primary_helper_disable(struct drm_plane *plane)
329{
Daniel Vetterb6ccd7b2014-04-15 10:02:43 +0200330 return -EINVAL;
Matt Roperc103d1c2014-04-01 15:22:35 -0700331}
332EXPORT_SYMBOL(drm_primary_helper_disable);
333
334/**
335 * drm_primary_helper_destroy() - Helper for primary plane destruction
336 * @plane: plane to destroy
337 *
338 * Provides a default plane destroy handler for primary planes. This handler
339 * is called during CRTC destruction. We disable the primary plane, remove
340 * it from the DRM plane list, and deallocate the plane structure.
341 */
342void drm_primary_helper_destroy(struct drm_plane *plane)
343{
Matt Roperc103d1c2014-04-01 15:22:35 -0700344 drm_plane_cleanup(plane);
345 kfree(plane);
346}
347EXPORT_SYMBOL(drm_primary_helper_destroy);
348
349const struct drm_plane_funcs drm_primary_helper_funcs = {
350 .update_plane = drm_primary_helper_update,
351 .disable_plane = drm_primary_helper_disable,
352 .destroy = drm_primary_helper_destroy,
353};
354EXPORT_SYMBOL(drm_primary_helper_funcs);
355
Daniel Vetter3461b302015-03-05 10:32:44 +0100356static struct drm_plane *create_primary_plane(struct drm_device *dev)
Matt Roperc103d1c2014-04-01 15:22:35 -0700357{
358 struct drm_plane *primary;
359 int ret;
360
361 primary = kzalloc(sizeof(*primary), GFP_KERNEL);
362 if (primary == NULL) {
363 DRM_DEBUG_KMS("Failed to allocate primary plane\n");
364 return NULL;
365 }
366
Daniel Vetter967667f2015-03-11 08:35:47 +0100367 /*
368 * Remove the format_default field from drm_plane when dropping
369 * this helper.
370 */
371 primary->format_default = true;
372
Matt Roperc103d1c2014-04-01 15:22:35 -0700373 /* possible_crtc's will be filled in later by crtc_init */
Matt Roper3281cc72014-06-30 15:37:51 -0700374 ret = drm_universal_plane_init(dev, primary, 0,
375 &drm_primary_helper_funcs,
Daniel Vetter3461b302015-03-05 10:32:44 +0100376 safe_modeset_formats,
377 ARRAY_SIZE(safe_modeset_formats),
Ville Syrjäläb0b3b792015-12-09 16:19:55 +0200378 DRM_PLANE_TYPE_PRIMARY, NULL);
Matt Roperc103d1c2014-04-01 15:22:35 -0700379 if (ret) {
380 kfree(primary);
381 primary = NULL;
382 }
383
384 return primary;
385}
Matt Roperc103d1c2014-04-01 15:22:35 -0700386
Matt Ropere13161a2014-04-01 15:22:38 -0700387/**
388 * drm_crtc_init - Legacy CRTC initialization function
389 * @dev: DRM device
390 * @crtc: CRTC object to init
391 * @funcs: callbacks for the new CRTC
392 *
393 * Initialize a CRTC object with a default helper-provided primary plane and no
394 * cursor plane.
395 *
396 * Returns:
397 * Zero on success, error code on failure.
398 */
399int drm_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
400 const struct drm_crtc_funcs *funcs)
401{
402 struct drm_plane *primary;
403
Daniel Vetter3461b302015-03-05 10:32:44 +0100404 primary = create_primary_plane(dev);
Ville Syrjäläf9882872015-12-09 16:19:31 +0200405 return drm_crtc_init_with_planes(dev, crtc, primary, NULL, funcs,
406 NULL);
Matt Ropere13161a2014-04-01 15:22:38 -0700407}
408EXPORT_SYMBOL(drm_crtc_init);
Daniel Vetteracf24a32014-07-29 15:33:05 +0200409
Daniel Vetter2f324b42014-10-29 11:13:47 +0100410int drm_plane_helper_commit(struct drm_plane *plane,
411 struct drm_plane_state *plane_state,
412 struct drm_framebuffer *old_fb)
Daniel Vetteracf24a32014-07-29 15:33:05 +0200413{
Jani Nikulabe26a662015-03-11 11:51:06 +0200414 const struct drm_plane_helper_funcs *plane_funcs;
Daniel Vetteracf24a32014-07-29 15:33:05 +0200415 struct drm_crtc *crtc[2];
Jani Nikulabe26a662015-03-11 11:51:06 +0200416 const struct drm_crtc_helper_funcs *crtc_funcs[2];
Daniel Vetteracf24a32014-07-29 15:33:05 +0200417 int i, ret = 0;
418
419 plane_funcs = plane->helper_private;
420
421 /* Since this is a transitional helper we can't assume that plane->state
422 * is always valid. Hence we need to use plane->crtc instead of
423 * plane->state->crtc as the old crtc. */
424 crtc[0] = plane->crtc;
425 crtc[1] = crtc[0] != plane_state->crtc ? plane_state->crtc : NULL;
426
427 for (i = 0; i < 2; i++)
428 crtc_funcs[i] = crtc[i] ? crtc[i]->helper_private : NULL;
429
430 if (plane_funcs->atomic_check) {
431 ret = plane_funcs->atomic_check(plane, plane_state);
432 if (ret)
433 goto out;
434 }
435
Matt Roper92890582015-01-19 08:31:49 -0800436 if (plane_funcs->prepare_fb && plane_state->fb &&
437 plane_state->fb != old_fb) {
Maarten Lankhorst844f9112015-09-02 10:42:40 +0200438 ret = plane_funcs->prepare_fb(plane,
Tvrtko Ursulind136dfe2015-03-03 14:22:31 +0000439 plane_state);
Daniel Vetteracf24a32014-07-29 15:33:05 +0200440 if (ret)
441 goto out;
442 }
443
444 /* Point of no return, commit sw state. */
445 swap(plane->state, plane_state);
446
447 for (i = 0; i < 2; i++) {
448 if (crtc_funcs[i] && crtc_funcs[i]->atomic_begin)
Maarten Lankhorst613d2b22015-07-21 13:28:58 +0200449 crtc_funcs[i]->atomic_begin(crtc[i], crtc[i]->state);
Daniel Vetteracf24a32014-07-29 15:33:05 +0200450 }
451
Thierry Reding407b8bd2014-11-20 12:05:50 +0100452 /*
453 * Drivers may optionally implement the ->atomic_disable callback, so
454 * special-case that here.
455 */
456 if (drm_atomic_plane_disabling(plane, plane_state) &&
457 plane_funcs->atomic_disable)
458 plane_funcs->atomic_disable(plane, plane_state);
459 else
460 plane_funcs->atomic_update(plane, plane_state);
Daniel Vetteracf24a32014-07-29 15:33:05 +0200461
462 for (i = 0; i < 2; i++) {
463 if (crtc_funcs[i] && crtc_funcs[i]->atomic_flush)
Maarten Lankhorst613d2b22015-07-21 13:28:58 +0200464 crtc_funcs[i]->atomic_flush(crtc[i], crtc[i]->state);
Daniel Vetteracf24a32014-07-29 15:33:05 +0200465 }
466
Matt Roper92890582015-01-19 08:31:49 -0800467 /*
468 * If we only moved the plane and didn't change fb's, there's no need to
469 * wait for vblank.
470 */
471 if (plane->state->fb == old_fb)
472 goto out;
473
Daniel Vetteracf24a32014-07-29 15:33:05 +0200474 for (i = 0; i < 2; i++) {
475 if (!crtc[i])
476 continue;
477
Daniel Vetter2e7f43c2015-05-20 10:36:32 +0200478 if (crtc[i]->cursor == plane)
479 continue;
480
Daniel Vetteracf24a32014-07-29 15:33:05 +0200481 /* There's no other way to figure out whether the crtc is running. */
482 ret = drm_crtc_vblank_get(crtc[i]);
483 if (ret == 0) {
484 drm_crtc_wait_one_vblank(crtc[i]);
485 drm_crtc_vblank_put(crtc[i]);
486 }
487
488 ret = 0;
489 }
490
Maarten Lankhorst844f9112015-09-02 10:42:40 +0200491 if (plane_funcs->cleanup_fb)
492 plane_funcs->cleanup_fb(plane, plane_state);
Daniel Vetteracf24a32014-07-29 15:33:05 +0200493out:
494 if (plane_state) {
495 if (plane->funcs->atomic_destroy_state)
496 plane->funcs->atomic_destroy_state(plane, plane_state);
497 else
Daniel Vetter321ebf02014-11-04 22:57:27 +0100498 drm_atomic_helper_plane_destroy_state(plane, plane_state);
Daniel Vetteracf24a32014-07-29 15:33:05 +0200499 }
500
501 return ret;
502}
503
504/**
Matt Roper6a425c22015-01-15 18:34:22 -0800505 * drm_plane_helper_update() - Transitional helper for plane update
Daniel Vetteracf24a32014-07-29 15:33:05 +0200506 * @plane: plane object to update
507 * @crtc: owning CRTC of owning plane
508 * @fb: framebuffer to flip onto plane
509 * @crtc_x: x offset of primary plane on crtc
510 * @crtc_y: y offset of primary plane on crtc
511 * @crtc_w: width of primary plane rectangle on crtc
512 * @crtc_h: height of primary plane rectangle on crtc
513 * @src_x: x offset of @fb for panning
514 * @src_y: y offset of @fb for panning
515 * @src_w: width of source rectangle in @fb
516 * @src_h: height of source rectangle in @fb
517 *
518 * Provides a default plane update handler using the atomic plane update
519 * functions. It is fully left to the driver to check plane constraints and
520 * handle corner-cases like a fully occluded or otherwise invisible plane.
521 *
522 * This is useful for piecewise transitioning of a driver to the atomic helpers.
523 *
524 * RETURNS:
525 * Zero on success, error code on failure
526 */
527int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
528 struct drm_framebuffer *fb,
529 int crtc_x, int crtc_y,
530 unsigned int crtc_w, unsigned int crtc_h,
531 uint32_t src_x, uint32_t src_y,
532 uint32_t src_w, uint32_t src_h)
533{
534 struct drm_plane_state *plane_state;
535
536 if (plane->funcs->atomic_duplicate_state)
537 plane_state = plane->funcs->atomic_duplicate_state(plane);
Daniel Vettere4f31ad2015-07-02 16:33:53 +0200538 else {
539 if (!plane->state)
540 drm_atomic_helper_plane_reset(plane);
541
Daniel Vetter321ebf02014-11-04 22:57:27 +0100542 plane_state = drm_atomic_helper_plane_duplicate_state(plane);
Daniel Vettere4f31ad2015-07-02 16:33:53 +0200543 }
Daniel Vetteracf24a32014-07-29 15:33:05 +0200544 if (!plane_state)
545 return -ENOMEM;
Daniel Vetter07cc0ef2014-11-27 15:49:39 +0100546 plane_state->plane = plane;
Daniel Vetteracf24a32014-07-29 15:33:05 +0200547
548 plane_state->crtc = crtc;
Daniel Vetter321ebf02014-11-04 22:57:27 +0100549 drm_atomic_set_fb_for_plane(plane_state, fb);
Daniel Vetteracf24a32014-07-29 15:33:05 +0200550 plane_state->crtc_x = crtc_x;
551 plane_state->crtc_y = crtc_y;
552 plane_state->crtc_h = crtc_h;
553 plane_state->crtc_w = crtc_w;
554 plane_state->src_x = src_x;
555 plane_state->src_y = src_y;
556 plane_state->src_h = src_h;
557 plane_state->src_w = src_w;
558
Daniel Vetter2f324b42014-10-29 11:13:47 +0100559 return drm_plane_helper_commit(plane, plane_state, plane->fb);
Daniel Vetteracf24a32014-07-29 15:33:05 +0200560}
561EXPORT_SYMBOL(drm_plane_helper_update);
562
563/**
Matt Roper6a425c22015-01-15 18:34:22 -0800564 * drm_plane_helper_disable() - Transitional helper for plane disable
Daniel Vetteracf24a32014-07-29 15:33:05 +0200565 * @plane: plane to disable
566 *
567 * Provides a default plane disable handler using the atomic plane update
568 * functions. It is fully left to the driver to check plane constraints and
569 * handle corner-cases like a fully occluded or otherwise invisible plane.
570 *
571 * This is useful for piecewise transitioning of a driver to the atomic helpers.
572 *
573 * RETURNS:
574 * Zero on success, error code on failure
575 */
576int drm_plane_helper_disable(struct drm_plane *plane)
577{
578 struct drm_plane_state *plane_state;
579
580 /* crtc helpers love to call disable functions for already disabled hw
581 * functions. So cope with that. */
582 if (!plane->crtc)
583 return 0;
584
585 if (plane->funcs->atomic_duplicate_state)
586 plane_state = plane->funcs->atomic_duplicate_state(plane);
Daniel Vettere4f31ad2015-07-02 16:33:53 +0200587 else {
588 if (!plane->state)
589 drm_atomic_helper_plane_reset(plane);
590
Daniel Vetter321ebf02014-11-04 22:57:27 +0100591 plane_state = drm_atomic_helper_plane_duplicate_state(plane);
Daniel Vettere4f31ad2015-07-02 16:33:53 +0200592 }
Daniel Vetteracf24a32014-07-29 15:33:05 +0200593 if (!plane_state)
594 return -ENOMEM;
Daniel Vetter07cc0ef2014-11-27 15:49:39 +0100595 plane_state->plane = plane;
Daniel Vetteracf24a32014-07-29 15:33:05 +0200596
597 plane_state->crtc = NULL;
Daniel Vetter321ebf02014-11-04 22:57:27 +0100598 drm_atomic_set_fb_for_plane(plane_state, NULL);
Daniel Vetteracf24a32014-07-29 15:33:05 +0200599
Daniel Vetter2f324b42014-10-29 11:13:47 +0100600 return drm_plane_helper_commit(plane, plane_state, plane->fb);
Daniel Vetteracf24a32014-07-29 15:33:05 +0200601}
602EXPORT_SYMBOL(drm_plane_helper_disable);