blob: e2953fc1fafbc175bb87bac04e9acf94a28944e2 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/ide/arm/icside.c
3 *
4 * Copyright (c) 1996-2004 Russell King.
5 *
6 * Please note that this platform does not support 32-bit IDE IO.
7 */
8
Linus Torvalds1da177e2005-04-16 15:20:36 -07009#include <linux/string.h>
10#include <linux/module.h>
11#include <linux/ioport.h>
12#include <linux/slab.h>
13#include <linux/blkdev.h>
14#include <linux/errno.h>
15#include <linux/hdreg.h>
16#include <linux/ide.h>
17#include <linux/dma-mapping.h>
18#include <linux/device.h>
19#include <linux/init.h>
20#include <linux/scatterlist.h>
21
22#include <asm/dma.h>
23#include <asm/ecard.h>
24#include <asm/io.h>
25
26#define ICS_IDENT_OFFSET 0x2280
27
28#define ICS_ARCIN_V5_INTRSTAT 0x0000
29#define ICS_ARCIN_V5_INTROFFSET 0x0004
30#define ICS_ARCIN_V5_IDEOFFSET 0x2800
31#define ICS_ARCIN_V5_IDEALTOFFSET 0x2b80
32#define ICS_ARCIN_V5_IDESTEPPING 6
33
34#define ICS_ARCIN_V6_IDEOFFSET_1 0x2000
35#define ICS_ARCIN_V6_INTROFFSET_1 0x2200
36#define ICS_ARCIN_V6_INTRSTAT_1 0x2290
37#define ICS_ARCIN_V6_IDEALTOFFSET_1 0x2380
38#define ICS_ARCIN_V6_IDEOFFSET_2 0x3000
39#define ICS_ARCIN_V6_INTROFFSET_2 0x3200
40#define ICS_ARCIN_V6_INTRSTAT_2 0x3290
41#define ICS_ARCIN_V6_IDEALTOFFSET_2 0x3380
42#define ICS_ARCIN_V6_IDESTEPPING 6
43
44struct cardinfo {
45 unsigned int dataoffset;
46 unsigned int ctrloffset;
47 unsigned int stepping;
48};
49
50static struct cardinfo icside_cardinfo_v5 = {
51 .dataoffset = ICS_ARCIN_V5_IDEOFFSET,
52 .ctrloffset = ICS_ARCIN_V5_IDEALTOFFSET,
53 .stepping = ICS_ARCIN_V5_IDESTEPPING,
54};
55
56static struct cardinfo icside_cardinfo_v6_1 = {
57 .dataoffset = ICS_ARCIN_V6_IDEOFFSET_1,
58 .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_1,
59 .stepping = ICS_ARCIN_V6_IDESTEPPING,
60};
61
62static struct cardinfo icside_cardinfo_v6_2 = {
63 .dataoffset = ICS_ARCIN_V6_IDEOFFSET_2,
64 .ctrloffset = ICS_ARCIN_V6_IDEALTOFFSET_2,
65 .stepping = ICS_ARCIN_V6_IDESTEPPING,
66};
67
68struct icside_state {
69 unsigned int channel;
70 unsigned int enabled;
71 void __iomem *irq_port;
72 void __iomem *ioc_base;
73 unsigned int type;
74 /* parent device... until the IDE core gets one of its own */
75 struct device *dev;
76 ide_hwif_t *hwif[2];
77};
78
79#define ICS_TYPE_A3IN 0
80#define ICS_TYPE_A3USER 1
81#define ICS_TYPE_V6 3
82#define ICS_TYPE_V5 15
83#define ICS_TYPE_NOTYPE ((unsigned int)-1)
84
85/* ---------------- Version 5 PCB Support Functions --------------------- */
86/* Prototype: icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
87 * Purpose : enable interrupts from card
88 */
89static void icside_irqenable_arcin_v5 (struct expansion_card *ec, int irqnr)
90{
91 struct icside_state *state = ec->irq_data;
92
93 writeb(0, state->irq_port + ICS_ARCIN_V5_INTROFFSET);
94}
95
96/* Prototype: icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
97 * Purpose : disable interrupts from card
98 */
99static void icside_irqdisable_arcin_v5 (struct expansion_card *ec, int irqnr)
100{
101 struct icside_state *state = ec->irq_data;
102
103 readb(state->irq_port + ICS_ARCIN_V5_INTROFFSET);
104}
105
106static const expansioncard_ops_t icside_ops_arcin_v5 = {
107 .irqenable = icside_irqenable_arcin_v5,
108 .irqdisable = icside_irqdisable_arcin_v5,
109};
110
111
112/* ---------------- Version 6 PCB Support Functions --------------------- */
113/* Prototype: icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
114 * Purpose : enable interrupts from card
115 */
116static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr)
117{
118 struct icside_state *state = ec->irq_data;
119 void __iomem *base = state->irq_port;
120
121 state->enabled = 1;
122
123 switch (state->channel) {
124 case 0:
125 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1);
126 readb(base + ICS_ARCIN_V6_INTROFFSET_2);
127 break;
128 case 1:
129 writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2);
130 readb(base + ICS_ARCIN_V6_INTROFFSET_1);
131 break;
132 }
133}
134
135/* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
136 * Purpose : disable interrupts from card
137 */
138static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr)
139{
140 struct icside_state *state = ec->irq_data;
141
142 state->enabled = 0;
143
144 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
145 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
146}
147
148/* Prototype: icside_irqprobe(struct expansion_card *ec)
149 * Purpose : detect an active interrupt from card
150 */
151static int icside_irqpending_arcin_v6(struct expansion_card *ec)
152{
153 struct icside_state *state = ec->irq_data;
154
155 return readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_1) & 1 ||
156 readb(state->irq_port + ICS_ARCIN_V6_INTRSTAT_2) & 1;
157}
158
159static const expansioncard_ops_t icside_ops_arcin_v6 = {
160 .irqenable = icside_irqenable_arcin_v6,
161 .irqdisable = icside_irqdisable_arcin_v6,
162 .irqpending = icside_irqpending_arcin_v6,
163};
164
165/*
166 * Handle routing of interrupts. This is called before
167 * we write the command to the drive.
168 */
169static void icside_maskproc(ide_drive_t *drive, int mask)
170{
171 ide_hwif_t *hwif = HWIF(drive);
172 struct icside_state *state = hwif->hwif_data;
173 unsigned long flags;
174
175 local_irq_save(flags);
176
177 state->channel = hwif->channel;
178
179 if (state->enabled && !mask) {
180 switch (hwif->channel) {
181 case 0:
182 writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
183 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
184 break;
185 case 1:
186 writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
187 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
188 break;
189 }
190 } else {
191 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2);
192 readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1);
193 }
194
195 local_irq_restore(flags);
196}
197
198#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
Linus Torvalds1da177e2005-04-16 15:20:36 -0700199/*
200 * SG-DMA support.
201 *
202 * Similar to the BM-DMA, but we use the RiscPCs IOMD DMA controllers.
203 * There is only one DMA controller per card, which means that only
204 * one drive can be accessed at one time. NOTE! We do not enforce that
205 * here, but we rely on the main IDE driver spotting that both
206 * interfaces use the same IRQ, which should guarantee this.
207 */
208
209static void icside_build_sglist(ide_drive_t *drive, struct request *rq)
210{
211 ide_hwif_t *hwif = drive->hwif;
212 struct icside_state *state = hwif->hwif_data;
213 struct scatterlist *sg = hwif->sg_table;
214
215 ide_map_sg(drive, rq);
216
217 if (rq_data_dir(rq) == READ)
218 hwif->sg_dma_direction = DMA_FROM_DEVICE;
219 else
220 hwif->sg_dma_direction = DMA_TO_DEVICE;
221
222 hwif->sg_nents = dma_map_sg(state->dev, sg, hwif->sg_nents,
223 hwif->sg_dma_direction);
224}
225
226/*
227 * Configure the IOMD to give the appropriate timings for the transfer
228 * mode being requested. We take the advice of the ATA standards, and
229 * calculate the cycle time based on the transfer mode, and the EIDE
230 * MW DMA specs that the drive provides in the IDENTIFY command.
231 *
232 * We have the following IOMD DMA modes to choose from:
233 *
234 * Type Active Recovery Cycle
235 * A 250 (250) 312 (550) 562 (800)
236 * B 187 250 437
237 * C 125 (125) 125 (375) 250 (500)
238 * D 62 125 187
239 *
240 * (figures in brackets are actual measured timings)
241 *
242 * However, we also need to take care of the read/write active and
243 * recovery timings:
244 *
245 * Read Write
246 * Mode Active -- Recovery -- Cycle IOMD type
247 * MW0 215 50 215 480 A
248 * MW1 80 50 50 150 C
249 * MW2 70 25 25 120 C
250 */
251static int icside_set_speed(ide_drive_t *drive, u8 xfer_mode)
252{
253 int on = 0, cycle_time = 0, use_dma_info = 0;
254
255 /*
256 * Limit the transfer speed to MW_DMA_2.
257 */
258 if (xfer_mode > XFER_MW_DMA_2)
259 xfer_mode = XFER_MW_DMA_2;
260
261 switch (xfer_mode) {
262 case XFER_MW_DMA_2:
263 cycle_time = 250;
264 use_dma_info = 1;
265 break;
266
267 case XFER_MW_DMA_1:
268 cycle_time = 250;
269 use_dma_info = 1;
270 break;
271
272 case XFER_MW_DMA_0:
273 cycle_time = 480;
274 break;
275
276 case XFER_SW_DMA_2:
277 case XFER_SW_DMA_1:
278 case XFER_SW_DMA_0:
279 cycle_time = 480;
280 break;
281 }
282
283 /*
284 * If we're going to be doing MW_DMA_1 or MW_DMA_2, we should
285 * take care to note the values in the ID...
286 */
287 if (use_dma_info && drive->id->eide_dma_time > cycle_time)
288 cycle_time = drive->id->eide_dma_time;
289
290 drive->drive_data = cycle_time;
291
292 if (cycle_time && ide_config_drive_speed(drive, xfer_mode) == 0)
293 on = 1;
294 else
295 drive->drive_data = 480;
296
297 printk("%s: %s selected (peak %dMB/s)\n", drive->name,
298 ide_xfer_verbose(xfer_mode), 2000 / drive->drive_data);
299
300 drive->current_speed = xfer_mode;
301
302 return on;
303}
304
Bartlomiej Zolnierkiewicz7469aaf2007-02-17 02:40:26 +0100305static void icside_dma_host_off(ide_drive_t *drive)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700306{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700307}
308
Bartlomiej Zolnierkiewicz7469aaf2007-02-17 02:40:26 +0100309static void icside_dma_off_quietly(ide_drive_t *drive)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700310{
311 drive->using_dma = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700312}
313
Bartlomiej Zolnierkiewiczccf35282007-02-17 02:40:26 +0100314static void icside_dma_host_on(ide_drive_t *drive)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700315{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700316}
317
318static int icside_dma_on(ide_drive_t *drive)
319{
320 drive->using_dma = 1;
Bartlomiej Zolnierkiewiczccf35282007-02-17 02:40:26 +0100321
322 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700323}
324
325static int icside_dma_check(ide_drive_t *drive)
326{
327 struct hd_driveid *id = drive->id;
328 ide_hwif_t *hwif = HWIF(drive);
329 int xfer_mode = XFER_PIO_2;
330 int on;
331
332 if (!(id->capability & 1) || !hwif->autodma)
333 goto out;
334
335 /*
336 * Consult the list of known "bad" drives
337 */
338 if (__ide_dma_bad_drive(drive))
339 goto out;
340
341 /*
342 * Enable DMA on any drive that has multiword DMA
343 */
344 if (id->field_valid & 2) {
345 xfer_mode = ide_dma_speed(drive, 0);
346 goto out;
347 }
348
349 /*
350 * Consult the list of known "good" drives
351 */
352 if (__ide_dma_good_drive(drive)) {
353 if (id->eide_dma_time > 150)
354 goto out;
355 xfer_mode = XFER_MW_DMA_1;
356 }
357
358out:
359 on = icside_set_speed(drive, xfer_mode);
360
Bartlomiej Zolnierkiewicz3608b5d2007-02-17 02:40:26 +0100361 return on ? 0 : -1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700362}
363
364static int icside_dma_end(ide_drive_t *drive)
365{
366 ide_hwif_t *hwif = HWIF(drive);
367 struct icside_state *state = hwif->hwif_data;
368
369 drive->waiting_for_dma = 0;
370
371 disable_dma(hwif->hw.dma);
372
373 /* Teardown mappings after DMA has completed. */
374 dma_unmap_sg(state->dev, hwif->sg_table, hwif->sg_nents,
375 hwif->sg_dma_direction);
376
377 return get_dma_residue(hwif->hw.dma) != 0;
378}
379
380static void icside_dma_start(ide_drive_t *drive)
381{
382 ide_hwif_t *hwif = HWIF(drive);
383
384 /* We can not enable DMA on both channels simultaneously. */
385 BUG_ON(dma_channel_active(hwif->hw.dma));
386 enable_dma(hwif->hw.dma);
387}
388
389static int icside_dma_setup(ide_drive_t *drive)
390{
391 ide_hwif_t *hwif = HWIF(drive);
392 struct request *rq = hwif->hwgroup->rq;
393 unsigned int dma_mode;
394
395 if (rq_data_dir(rq))
396 dma_mode = DMA_MODE_WRITE;
397 else
398 dma_mode = DMA_MODE_READ;
399
400 /*
401 * We can not enable DMA on both channels.
402 */
403 BUG_ON(dma_channel_active(hwif->hw.dma));
404
405 icside_build_sglist(drive, rq);
406
407 /*
408 * Ensure that we have the right interrupt routed.
409 */
410 icside_maskproc(drive, 0);
411
412 /*
413 * Route the DMA signals to the correct interface.
414 */
415 writeb(hwif->select_data, hwif->config_data);
416
417 /*
418 * Select the correct timing for this drive.
419 */
420 set_dma_speed(hwif->hw.dma, drive->drive_data);
421
422 /*
423 * Tell the DMA engine about the SG table and
424 * data direction.
425 */
426 set_dma_sg(hwif->hw.dma, hwif->sg_table, hwif->sg_nents);
427 set_dma_mode(hwif->hw.dma, dma_mode);
428
429 drive->waiting_for_dma = 1;
430
431 return 0;
432}
433
434static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd)
435{
436 /* issue cmd to drive */
437 ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD, NULL);
438}
439
440static int icside_dma_test_irq(ide_drive_t *drive)
441{
442 ide_hwif_t *hwif = HWIF(drive);
443 struct icside_state *state = hwif->hwif_data;
444
445 return readb(state->irq_port +
446 (hwif->channel ?
447 ICS_ARCIN_V6_INTRSTAT_2 :
448 ICS_ARCIN_V6_INTRSTAT_1)) & 1;
449}
450
451static int icside_dma_timeout(ide_drive_t *drive)
452{
453 printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
454
455 if (icside_dma_test_irq(drive))
456 return 0;
457
458 ide_dump_status(drive, "DMA timeout",
459 HWIF(drive)->INB(IDE_STATUS_REG));
460
461 return icside_dma_end(drive);
462}
463
464static int icside_dma_lostirq(ide_drive_t *drive)
465{
466 printk(KERN_ERR "%s: IRQ lost\n", drive->name);
467 return 1;
468}
469
470static void icside_dma_init(ide_hwif_t *hwif)
471{
Linus Torvalds1da177e2005-04-16 15:20:36 -0700472 printk(" %s: SG-DMA", hwif->name);
473
474 hwif->atapi_dma = 1;
475 hwif->mwdma_mask = 7; /* MW0..2 */
476 hwif->swdma_mask = 7; /* SW0..2 */
477
478 hwif->dmatable_cpu = NULL;
479 hwif->dmatable_dma = 0;
480 hwif->speedproc = icside_set_speed;
Bartlomiej Zolnierkiewicz120b9cf2007-03-17 21:57:41 +0100481 hwif->autodma = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700482
483 hwif->ide_dma_check = icside_dma_check;
Bartlomiej Zolnierkiewicz7469aaf2007-02-17 02:40:26 +0100484 hwif->dma_host_off = icside_dma_host_off;
485 hwif->dma_off_quietly = icside_dma_off_quietly;
Bartlomiej Zolnierkiewiczccf35282007-02-17 02:40:26 +0100486 hwif->dma_host_on = icside_dma_host_on;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700487 hwif->ide_dma_on = icside_dma_on;
488 hwif->dma_setup = icside_dma_setup;
489 hwif->dma_exec_cmd = icside_dma_exec_cmd;
490 hwif->dma_start = icside_dma_start;
491 hwif->ide_dma_end = icside_dma_end;
492 hwif->ide_dma_test_irq = icside_dma_test_irq;
493 hwif->ide_dma_timeout = icside_dma_timeout;
494 hwif->ide_dma_lostirq = icside_dma_lostirq;
495
496 hwif->drives[0].autodma = hwif->autodma;
497 hwif->drives[1].autodma = hwif->autodma;
498
499 printk(" capable%s\n", hwif->autodma ? ", auto-enable" : "");
500}
501#else
502#define icside_dma_init(hwif) (0)
503#endif
504
505static ide_hwif_t *icside_find_hwif(unsigned long dataport)
506{
507 ide_hwif_t *hwif;
508 int index;
509
510 for (index = 0; index < MAX_HWIFS; ++index) {
511 hwif = &ide_hwifs[index];
512 if (hwif->io_ports[IDE_DATA_OFFSET] == dataport)
513 goto found;
514 }
515
516 for (index = 0; index < MAX_HWIFS; ++index) {
517 hwif = &ide_hwifs[index];
518 if (!hwif->io_ports[IDE_DATA_OFFSET])
519 goto found;
520 }
521
522 hwif = NULL;
523found:
524 return hwif;
525}
526
527static ide_hwif_t *
528icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *ec)
529{
530 unsigned long port = (unsigned long)base + info->dataoffset;
531 ide_hwif_t *hwif;
532
533 hwif = icside_find_hwif(port);
534 if (hwif) {
535 int i;
536
537 memset(&hwif->hw, 0, sizeof(hw_regs_t));
538
539 /*
540 * Ensure we're using MMIO
541 */
542 default_hwif_mmiops(hwif);
Bartlomiej Zolnierkiewicz2ad1e552007-02-17 02:40:25 +0100543 hwif->mmio = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700544
545 for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
546 hwif->hw.io_ports[i] = port;
547 hwif->io_ports[i] = port;
548 port += 1 << info->stepping;
549 }
550 hwif->hw.io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset;
551 hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)base + info->ctrloffset;
552 hwif->hw.irq = ec->irq;
553 hwif->irq = ec->irq;
554 hwif->noprobe = 0;
555 hwif->chipset = ide_acorn;
556 hwif->gendev.parent = &ec->dev;
557 }
558
559 return hwif;
560}
561
562static int __init
563icside_register_v5(struct icside_state *state, struct expansion_card *ec)
564{
565 ide_hwif_t *hwif;
566 void __iomem *base;
567
568 base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
569 ecard_resource_len(ec, ECARD_RES_MEMC));
570 if (!base)
571 return -ENOMEM;
572
573 state->irq_port = base;
574
575 ec->irqaddr = base + ICS_ARCIN_V5_INTRSTAT;
576 ec->irqmask = 1;
577 ec->irq_data = state;
578 ec->ops = &icside_ops_arcin_v5;
579
580 /*
581 * Be on the safe side - disable interrupts
582 */
583 icside_irqdisable_arcin_v5(ec, 0);
584
585 hwif = icside_setup(base, &icside_cardinfo_v5, ec);
586 if (!hwif) {
587 iounmap(base);
588 return -ENODEV;
589 }
590
591 state->hwif[0] = hwif;
592
593 probe_hwif_init(hwif);
594 create_proc_ide_interfaces();
595
596 return 0;
597}
598
599static int __init
600icside_register_v6(struct icside_state *state, struct expansion_card *ec)
601{
602 ide_hwif_t *hwif, *mate;
603 void __iomem *ioc_base, *easi_base;
604 unsigned int sel = 0;
605 int ret;
606
607 ioc_base = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
608 ecard_resource_len(ec, ECARD_RES_IOCFAST));
609 if (!ioc_base) {
610 ret = -ENOMEM;
611 goto out;
612 }
613
614 easi_base = ioc_base;
615
616 if (ecard_resource_flags(ec, ECARD_RES_EASI)) {
617 easi_base = ioremap(ecard_resource_start(ec, ECARD_RES_EASI),
618 ecard_resource_len(ec, ECARD_RES_EASI));
619 if (!easi_base) {
620 ret = -ENOMEM;
621 goto unmap_slot;
622 }
623
624 /*
625 * Enable access to the EASI region.
626 */
627 sel = 1 << 5;
628 }
629
630 writeb(sel, ioc_base);
631
632 ec->irq_data = state;
633 ec->ops = &icside_ops_arcin_v6;
634
635 state->irq_port = easi_base;
636 state->ioc_base = ioc_base;
637
638 /*
639 * Be on the safe side - disable interrupts
640 */
641 icside_irqdisable_arcin_v6(ec, 0);
642
643 /*
644 * Find and register the interfaces.
645 */
646 hwif = icside_setup(easi_base, &icside_cardinfo_v6_1, ec);
647 mate = icside_setup(easi_base, &icside_cardinfo_v6_2, ec);
648
649 if (!hwif || !mate) {
650 ret = -ENODEV;
651 goto unmap_port;
652 }
653
654 state->hwif[0] = hwif;
655 state->hwif[1] = mate;
656
657 hwif->maskproc = icside_maskproc;
658 hwif->channel = 0;
659 hwif->hwif_data = state;
660 hwif->mate = mate;
661 hwif->serialized = 1;
662 hwif->config_data = (unsigned long)ioc_base;
663 hwif->select_data = sel;
664 hwif->hw.dma = ec->dma;
665
666 mate->maskproc = icside_maskproc;
667 mate->channel = 1;
668 mate->hwif_data = state;
669 mate->mate = hwif;
670 mate->serialized = 1;
671 mate->config_data = (unsigned long)ioc_base;
672 mate->select_data = sel | 1;
673 mate->hw.dma = ec->dma;
674
675 if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) {
676 icside_dma_init(hwif);
677 icside_dma_init(mate);
678 }
679
680 probe_hwif_init(hwif);
681 probe_hwif_init(mate);
682 create_proc_ide_interfaces();
683
684 return 0;
685
686 unmap_port:
687 if (easi_base != ioc_base)
688 iounmap(easi_base);
689 unmap_slot:
690 iounmap(ioc_base);
691 out:
692 return ret;
693}
694
695static int __devinit
696icside_probe(struct expansion_card *ec, const struct ecard_id *id)
697{
698 struct icside_state *state;
699 void __iomem *idmem;
700 int ret;
701
702 ret = ecard_request_resources(ec);
703 if (ret)
704 goto out;
705
706 state = kmalloc(sizeof(struct icside_state), GFP_KERNEL);
707 if (!state) {
708 ret = -ENOMEM;
709 goto release;
710 }
711
712 memset(state, 0, sizeof(state));
713 state->type = ICS_TYPE_NOTYPE;
714 state->dev = &ec->dev;
715
716 idmem = ioremap(ecard_resource_start(ec, ECARD_RES_IOCFAST),
717 ecard_resource_len(ec, ECARD_RES_IOCFAST));
718 if (idmem) {
719 unsigned int type;
720
721 type = readb(idmem + ICS_IDENT_OFFSET) & 1;
722 type |= (readb(idmem + ICS_IDENT_OFFSET + 4) & 1) << 1;
723 type |= (readb(idmem + ICS_IDENT_OFFSET + 8) & 1) << 2;
724 type |= (readb(idmem + ICS_IDENT_OFFSET + 12) & 1) << 3;
725 iounmap(idmem);
726
727 state->type = type;
728 }
729
730 switch (state->type) {
731 case ICS_TYPE_A3IN:
732 dev_warn(&ec->dev, "A3IN unsupported\n");
733 ret = -ENODEV;
734 break;
735
736 case ICS_TYPE_A3USER:
737 dev_warn(&ec->dev, "A3USER unsupported\n");
738 ret = -ENODEV;
739 break;
740
741 case ICS_TYPE_V5:
742 ret = icside_register_v5(state, ec);
743 break;
744
745 case ICS_TYPE_V6:
746 ret = icside_register_v6(state, ec);
747 break;
748
749 default:
750 dev_warn(&ec->dev, "unknown interface type\n");
751 ret = -ENODEV;
752 break;
753 }
754
755 if (ret == 0) {
756 ecard_set_drvdata(ec, state);
757 goto out;
758 }
759
760 kfree(state);
761 release:
762 ecard_release_resources(ec);
763 out:
764 return ret;
765}
766
767static void __devexit icside_remove(struct expansion_card *ec)
768{
769 struct icside_state *state = ecard_get_drvdata(ec);
770
771 switch (state->type) {
772 case ICS_TYPE_V5:
773 /* FIXME: tell IDE to stop using the interface */
774
775 /* Disable interrupts */
776 icside_irqdisable_arcin_v5(ec, 0);
777 break;
778
779 case ICS_TYPE_V6:
780 /* FIXME: tell IDE to stop using the interface */
781 if (ec->dma != NO_DMA)
782 free_dma(ec->dma);
783
784 /* Disable interrupts */
785 icside_irqdisable_arcin_v6(ec, 0);
786
787 /* Reset the ROM pointer/EASI selection */
788 writeb(0, state->ioc_base);
789 break;
790 }
791
792 ecard_set_drvdata(ec, NULL);
793 ec->ops = NULL;
794 ec->irq_data = NULL;
795
796 if (state->ioc_base)
797 iounmap(state->ioc_base);
798 if (state->ioc_base != state->irq_port)
799 iounmap(state->irq_port);
800
801 kfree(state);
802 ecard_release_resources(ec);
803}
804
805static void icside_shutdown(struct expansion_card *ec)
806{
807 struct icside_state *state = ecard_get_drvdata(ec);
808 unsigned long flags;
809
810 /*
811 * Disable interrupts from this card. We need to do
812 * this before disabling EASI since we may be accessing
813 * this register via that region.
814 */
815 local_irq_save(flags);
816 ec->ops->irqdisable(ec, 0);
817 local_irq_restore(flags);
818
819 /*
820 * Reset the ROM pointer so that we can read the ROM
821 * after a soft reboot. This also disables access to
822 * the IDE taskfile via the EASI region.
823 */
824 if (state->ioc_base)
825 writeb(0, state->ioc_base);
826}
827
828static const struct ecard_id icside_ids[] = {
829 { MANU_ICS, PROD_ICS_IDE },
830 { MANU_ICS2, PROD_ICS2_IDE },
831 { 0xffff, 0xffff }
832};
833
834static struct ecard_driver icside_driver = {
835 .probe = icside_probe,
836 .remove = __devexit_p(icside_remove),
837 .shutdown = icside_shutdown,
838 .id_table = icside_ids,
839 .drv = {
840 .name = "icside",
841 },
842};
843
844static int __init icside_init(void)
845{
846 return ecard_register_driver(&icside_driver);
847}
848
849MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
850MODULE_LICENSE("GPL");
851MODULE_DESCRIPTION("ICS IDE driver");
852
853module_init(icside_init);