drivers/virtio/virtio.c

#include <linux/virtio.h>
#include <linux/spinlock.h>
#include <linux/virtio_config.h>
#include <linux/module.h>
#include <linux/idr.h>

/* Unique numbering for virtio devices. */
static DEFINE_IDA(virtio_index_ida);

static ssize_t device_show(struct device *_d,
			   struct device_attribute *attr, char *buf)
{
	struct virtio_device *dev = dev_to_virtio(_d);
	return sprintf(buf, "0x%04x\n", dev->id.device);
}
static DEVICE_ATTR_RO(device);

static ssize_t vendor_show(struct device *_d,
			   struct device_attribute *attr, char *buf)
{
	struct virtio_device *dev = dev_to_virtio(_d);
	return sprintf(buf, "0x%04x\n", dev->id.vendor);
}
static DEVICE_ATTR_RO(vendor);

static ssize_t status_show(struct device *_d,
			   struct device_attribute *attr, char *buf)
{
	struct virtio_device *dev = dev_to_virtio(_d);
	return sprintf(buf, "0x%08x\n", dev->config->get_status(dev));
}
static DEVICE_ATTR_RO(status);

static ssize_t modalias_show(struct device *_d,
			     struct device_attribute *attr, char *buf)
{
	struct virtio_device *dev = dev_to_virtio(_d);
	return sprintf(buf, "virtio:d%08Xv%08X\n",
		       dev->id.device, dev->id.vendor);
}
static DEVICE_ATTR_RO(modalias);

static ssize_t features_show(struct device *_d,
			     struct device_attribute *attr, char *buf)
{
	struct virtio_device *dev = dev_to_virtio(_d);
	unsigned int i;
	ssize_t len = 0;

	/* We actually represent this as a bitstring, as it could be
	 * arbitrary length in future. */
	for (i = 0; i < ARRAY_SIZE(dev->features)*BITS_PER_LONG; i++)
		len += sprintf(buf+len, "%c",
			       test_bit(i, dev->features) ? '1' : '0');
	len += sprintf(buf+len, "\n");
	return len;
}
static DEVICE_ATTR_RO(features);

static struct attribute *virtio_dev_attrs[] = {
	&dev_attr_device.attr,
	&dev_attr_vendor.attr,
	&dev_attr_status.attr,
	&dev_attr_modalias.attr,
	&dev_attr_features.attr,
	NULL,
};
ATTRIBUTE_GROUPS(virtio_dev);

static inline int virtio_id_match(const struct virtio_device *dev,
				  const struct virtio_device_id *id)
{
	if (id->device != dev->id.device && id->device != VIRTIO_DEV_ANY_ID)
		return 0;

	return id->vendor == VIRTIO_DEV_ANY_ID || id->vendor == dev->id.vendor;
}

/* This looks through all the IDs a driver claims to support.  If any of them
 * match, we return 1 and the kernel will call virtio_dev_probe(). */
static int virtio_dev_match(struct device *_dv, struct device_driver *_dr)
{
	unsigned int i;
	struct virtio_device *dev = dev_to_virtio(_dv);
	const struct virtio_device_id *ids;

	ids = drv_to_virtio(_dr)->id_table;
	for (i = 0; ids[i].device; i++)
		if (virtio_id_match(dev, &ids[i]))
			return 1;
	return 0;
}

static int virtio_uevent(struct device *_dv, struct kobj_uevent_env *env)
{
	struct virtio_device *dev = dev_to_virtio(_dv);

	return add_uevent_var(env, "MODALIAS=virtio:d%08Xv%08X",
			      dev->id.device, dev->id.vendor);
}

static void add_status(struct virtio_device *dev, unsigned status)
{
	dev->config->set_status(dev, dev->config->get_status(dev) | status);
}

void virtio_check_driver_offered_feature(const struct virtio_device *vdev,
					 unsigned int fbit)
{
	unsigned int i;
	struct virtio_driver *drv = drv_to_virtio(vdev->dev.driver);

	for (i = 0; i < drv->feature_table_size; i++)
		if (drv->feature_table[i] == fbit)
			return;
	BUG();
}
EXPORT_SYMBOL_GPL(virtio_check_driver_offered_feature);

static void __virtio_config_changed(struct virtio_device *dev)
{
	struct virtio_driver *drv = drv_to_virtio(dev->dev.driver);

	if (!dev->config_enabled)
		dev->config_change_pending = true;
	else if (drv && drv->config_changed)
		drv->config_changed(dev);
}

void virtio_config_changed(struct virtio_device *dev)
{
	unsigned long flags;

	spin_lock_irqsave(&dev->config_lock, flags);
	__virtio_config_changed(dev);
	spin_unlock_irqrestore(&dev->config_lock, flags);
}
EXPORT_SYMBOL_GPL(virtio_config_changed);

static void virtio_config_disable(struct virtio_device *dev)
{
	spin_lock_irq(&dev->config_lock);
	dev->config_enabled = false;
	spin_unlock_irq(&dev->config_lock);
}

static void virtio_config_enable(struct virtio_device *dev)
{
	spin_lock_irq(&dev->config_lock);
	dev->config_enabled = true;
	if (dev->config_change_pending)
		__virtio_config_changed(dev);
	dev->config_change_pending = false;
	spin_unlock_irq(&dev->config_lock);
}

static int virtio_dev_probe(struct device *_d)
{
	int err, i;
	struct virtio_device *dev = dev_to_virtio(_d);
	struct virtio_driver *drv = drv_to_virtio(dev->dev.driver);
	u32 device_features;

	/* We have a driver! */
	add_status(dev, VIRTIO_CONFIG_S_DRIVER);

	/* Figure out what features the device supports. */
	device_features = dev->config->get_features(dev);

	/* Features supported by both device and driver into dev->features. */
	memset(dev->features, 0, sizeof(dev->features));
	for (i = 0; i < drv->feature_table_size; i++) {
		unsigned int f = drv->feature_table[i];
		BUG_ON(f >= 32);
		if (device_features & (1 << f))
			set_bit(f, dev->features);
	}

	/* Transport features always preserved to pass to finalize_features. */
	for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++)
		if (device_features & (1 << i))
			set_bit(i, dev->features);

	dev->config->finalize_features(dev);

	err = drv->probe(dev);
	if (err)
		add_status(dev, VIRTIO_CONFIG_S_FAILED);
	else {
		add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
		if (drv->scan)
			drv->scan(dev);

		virtio_config_enable(dev);
	}

	return err;
}

static int virtio_dev_remove(struct device *_d)
{
	struct virtio_device *dev = dev_to_virtio(_d);
	struct virtio_driver *drv = drv_to_virtio(dev->dev.driver);

	virtio_config_disable(dev);

	drv->remove(dev);

	/* Driver should have reset device. */
	WARN_ON_ONCE(dev->config->get_status(dev));

	/* Acknowledge the device's existence again. */
	add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
	return 0;
}

static struct bus_type virtio_bus = {
	.name  = "virtio",
	.match = virtio_dev_match,
	.dev_groups = virtio_dev_groups,
	.uevent = virtio_uevent,
	.probe = virtio_dev_probe,
	.remove = virtio_dev_remove,
};

int register_virtio_driver(struct virtio_driver *driver)
{
	/* Catch this early. */
	BUG_ON(driver->feature_table_size && !driver->feature_table);
	driver->driver.bus = &virtio_bus;
	return driver_register(&driver->driver);
}
EXPORT_SYMBOL_GPL(register_virtio_driver);

void unregister_virtio_driver(struct virtio_driver *driver)
{
	driver_unregister(&driver->driver);
}
EXPORT_SYMBOL_GPL(unregister_virtio_driver);

int register_virtio_device(struct virtio_device *dev)
{
	int err;

	dev->dev.bus = &virtio_bus;

	/* Assign a unique device index and hence name. */
	err = ida_simple_get(&virtio_index_ida, 0, 0, GFP_KERNEL);
	if (err < 0)
		goto out;

	dev->index = err;
	dev_set_name(&dev->dev, "virtio%u", dev->index);

	spin_lock_init(&dev->config_lock);
	dev->config_enabled = false;
	dev->config_change_pending = false;

	/* We always start by resetting the device, in case a previous
	 * driver messed it up.  This also tests that code path a little. */
	dev->config->reset(dev);

	/* Acknowledge that we've seen the device. */
	add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);

	INIT_LIST_HEAD(&dev->vqs);

	/* device_register() causes the bus infrastructure to look for a
	 * matching driver. */
	err = device_register(&dev->dev);
out:
	if (err)
		add_status(dev, VIRTIO_CONFIG_S_FAILED);
	return err;
}
EXPORT_SYMBOL_GPL(register_virtio_device);

void unregister_virtio_device(struct virtio_device *dev)
{
	int index = dev->index; /* save for after device release */

	device_unregister(&dev->dev);
	ida_simple_remove(&virtio_index_ida, index);
}
EXPORT_SYMBOL_GPL(unregister_virtio_device);

#ifdef CONFIG_PM_SLEEP
int virtio_device_freeze(struct virtio_device *dev)
{
	struct virtio_driver *drv = drv_to_virtio(dev->dev.driver);

	virtio_config_disable(dev);

	dev->failed = dev->config->get_status(dev) & VIRTIO_CONFIG_S_FAILED;

	if (drv && drv->freeze)
		return drv->freeze(dev);

	return 0;
}
EXPORT_SYMBOL_GPL(virtio_device_freeze);

int virtio_device_restore(struct virtio_device *dev)
{
	struct virtio_driver *drv = drv_to_virtio(dev->dev.driver);

	/* We always start by resetting the device, in case a previous
	 * driver messed it up. */
	dev->config->reset(dev);

	/* Acknowledge that we've seen the device. */
	add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);

	/* Maybe driver failed before freeze.
	 * Restore the failed status, for debugging. */
	if (dev->failed)
		add_status(dev, VIRTIO_CONFIG_S_FAILED);

	if (!drv)
		return 0;

	/* We have a driver! */
	add_status(dev, VIRTIO_CONFIG_S_DRIVER);

	dev->config->finalize_features(dev);

	if (drv->restore) {
		int ret = drv->restore(dev);
		if (ret) {
			add_status(dev, VIRTIO_CONFIG_S_FAILED);
			return ret;
		}
	}

	/* Finally, tell the device we're all set */
	add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);

	virtio_config_enable(dev);

	return 0;
}
EXPORT_SYMBOL_GPL(virtio_device_restore);
#endif

static int virtio_init(void)
{
	if (bus_register(&virtio_bus) != 0)
		panic("virtio bus registration failed");
	return 0;
}

static void __exit virtio_exit(void)
{
	bus_unregister(&virtio_bus);
}
core_initcall(virtio_init);
module_exit(virtio_exit);

MODULE_LICENSE("GPL");