Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 13ff5130ff6eeda5b517cf3a9d7b8f1ab534e106 / . / arch / arm64 / boot / dts / lg / lg1313.dtsi
blob: f3b1ba6f74220a8794984bd27750674742f894a6 [file] [log] [blame]
Chanho Min95b384f2016-06-01 10:39:58 +0900[diff] [blame]1/*
2 * dts file for lg1313 SoC
3 *
4 * Copyright (C) 2016, LG Electronics
5 */
6
7#include <dt-bindings/gpio/gpio.h>
8#include <dt-bindings/interrupt-controller/arm-gic.h>
9
10/ {
11 #address-cells = <2>;
12 #size-cells = <2>;
13
14 compatible = "lge,lg1313";
15 interrupt-parent = <&gic>;
16
17 cpus {
18 #address-cells = <2>;
19 #size-cells = <0>;
20
21 cpu0: cpu@0 {
22 device_type = "cpu";
23 compatible = "arm,cortex-a53", "arm,armv8";
24 reg = <0x0 0x0>;
25 next-level-cache = <&L2_0>;
26 };
27 cpu1: cpu@1 {
28 device_type = "cpu";
29 compatible = "arm,cortex-a53", "arm,armv8";
30 reg = <0x0 0x1>;
31 enable-method = "psci";
32 next-level-cache = <&L2_0>;
33 };
34 cpu2: cpu@2 {
35 device_type = "cpu";
36 compatible = "arm,cortex-a53", "arm,armv8";
37 reg = <0x0 0x2>;
38 enable-method = "psci";
39 next-level-cache = <&L2_0>;
40 };
41 cpu3: cpu@3 {
42 device_type = "cpu";
43 compatible = "arm,cortex-a53", "arm,armv8";
44 reg = <0x0 0x3>;
45 enable-method = "psci";
46 next-level-cache = <&L2_0>;
47 };
48 L2_0: l2-cache0 {
49 compatible = "cache";
50 };
51 };
52
53 psci {
54 compatible = "arm,psci-0.2", "arm,psci";
55 method = "smc";
56 cpu_suspend = <0x84000001>;
57 cpu_off = <0x84000002>;
58 cpu_on = <0x84000003>;
59 };
60
61 gic: interrupt-controller@c0001000 {
62 #interrupt-cells = <3>;
63 compatible = "arm,gic-400";
64 interrupt-controller;
65 reg = <0x0 0xc0001000 0x1000>,
66 <0x0 0xc0002000 0x2000>,
67 <0x0 0xc0004000 0x2000>,
68 <0x0 0xc0006000 0x2000>;
69 };
70
71 pmu {
72 compatible = "arm,cortex-a53-pmu";
73 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
74 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
75 <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
76 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
77 interrupt-affinity = <&cpu0>,
78 <&cpu1>,
79 <&cpu2>,
80 <&cpu3>;
81 };
82
83 timer {
84 compatible = "arm,armv8-timer";
85 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
86 IRQ_TYPE_LEVEL_LOW)>,
87 <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
88 IRQ_TYPE_LEVEL_LOW)>,
89 <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
90 IRQ_TYPE_LEVEL_LOW)>,
91 <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
92 IRQ_TYPE_LEVEL_LOW)>;
93 };
94
95 clk_bus: clk_bus {
96 #clock-cells = <0>;
97
98 compatible = "fixed-clock";
99 clock-frequency = <198000000>;
100 clock-output-names = "BUSCLK";
101 };
102
103 soc {
104 #address-cells = <2>;
105 #size-cells = <1>;
106
107 compatible = "simple-bus";
108 interrupt-parent = <&gic>;
109 ranges;
110
111 eth0: ethernet@c3700000 {
112 compatible = "cdns,gem";
113 reg = <0x0 0xc3700000 0x1000>;
114 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
115 clocks = <&clk_bus>, <&clk_bus>;
116 clock-names = "hclk", "pclk";
117 phy-mode = "rmii";
118 /* Filled in by boot */
119 mac-address = [ 00 00 00 00 00 00 ];
120 };
121 };
122
123 amba {
124 #address-cells = <2>;
125 #size-cells = <1>;
126 #interrupts-cells = <3>;
127
128 compatible = "simple-bus";
129 interrupt-parent = <&gic>;
130 ranges;
131
132 timers: timer@fd100000 {
133 compatible = "arm,sp804";
134 reg = <0x0 0xfd100000 0x1000>;
135 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
136 clocks = <&clk_bus>;
137 clock-names = "apb_pclk";
138 };
139 wdog: watchdog@fd200000 {
140 compatible = "arm,sp805", "arm,primecell";
141 reg = <0x0 0xfd200000 0x1000>;
142 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
143 clocks = <&clk_bus>;
144 clock-names = "apb_pclk";
145 };
146 uart0: serial@fe000000 {
147 compatible = "arm,pl011", "arm,primecell";
148 reg = <0x0 0xfe000000 0x1000>;
149 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
150 clocks = <&clk_bus>;
151 clock-names = "apb_pclk";
152 status="disabled";
153 };
154 uart1: serial@fe100000 {
155 compatible = "arm,pl011", "arm,primecell";
156 reg = <0x0 0xfe100000 0x1000>;
157 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
158 clocks = <&clk_bus>;
159 clock-names = "apb_pclk";
160 status="disabled";
161 };
162 uart2: serial@fe200000 {
163 compatible = "arm,pl011", "arm,primecell";
164 reg = <0x0 0xfe200000 0x1000>;
165 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
166 clocks = <&clk_bus>;
167 clock-names = "apb_pclk";
168 status="disabled";
169 };
Rob Herring0a5c2bf2018-09-13 13:12:44 -0500[diff] [blame]170 spi0: spi@fe800000 {
Chanho Min95b384f2016-06-01 10:39:58 +0900[diff] [blame]171 compatible = "arm,pl022", "arm,primecell";
172 reg = <0x0 0xfe800000 0x1000>;
173 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
174 clocks = <&clk_bus>;
175 clock-names = "apb_pclk";
176 };
Rob Herring0a5c2bf2018-09-13 13:12:44 -0500[diff] [blame]177 spi1: spi@fe900000 {
Chanho Min95b384f2016-06-01 10:39:58 +0900[diff] [blame]178 compatible = "arm,pl022", "arm,primecell";
179 reg = <0x0 0xfe900000 0x1000>;
180 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
181 clocks = <&clk_bus>;
182 clock-names = "apb_pclk";
183 };
184 dmac0: dma@c1128000 {
185 compatible = "arm,pl330", "arm,primecell";
186 reg = <0x0 0xc1128000 0x1000>;
187 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
188 clocks = <&clk_bus>;
189 clock-names = "apb_pclk";
190 };
191 gpio0: gpio@fd400000 {
192 #gpio-cells = <2>;
193 compatible = "arm,pl061", "arm,primecell";
194 gpio-controller;
195 reg = <0x0 0xfd400000 0x1000>;
196 clocks = <&clk_bus>;
197 clock-names = "apb_pclk";
198 status="disabled";
199 };
200 gpio1: gpio@fd410000 {
201 #gpio-cells = <2>;
202 compatible = "arm,pl061", "arm,primecell";
203 gpio-controller;
204 reg = <0x0 0xfd410000 0x1000>;
205 clocks = <&clk_bus>;
206 clock-names = "apb_pclk";
207 status="disabled";
208 };
209 gpio2: gpio@fd420000 {
210 #gpio-cells = <2>;
211 compatible = "arm,pl061", "arm,primecell";
212 gpio-controller;
213 reg = <0x0 0xfd420000 0x1000>;
214 clocks = <&clk_bus>;
215 clock-names = "apb_pclk";
216 status="disabled";
217 };
218 gpio3: gpio@fd430000 {
219 #gpio-cells = <2>;
220 compatible = "arm,pl061", "arm,primecell";
221 gpio-controller;
222 reg = <0x0 0xfd430000 0x1000>;
223 clocks = <&clk_bus>;
224 clock-names = "apb_pclk";
225 };
226 gpio4: gpio@fd440000 {
227 #gpio-cells = <2>;
228 compatible = "arm,pl061", "arm,primecell";
229 gpio-controller;
230 reg = <0x0 0xfd440000 0x1000>;
231 clocks = <&clk_bus>;
232 clock-names = "apb_pclk";
233 status="disabled";
234 };
235 gpio5: gpio@fd450000 {
236 #gpio-cells = <2>;
237 compatible = "arm,pl061", "arm,primecell";
238 gpio-controller;
239 reg = <0x0 0xfd450000 0x1000>;
240 clocks = <&clk_bus>;
241 clock-names = "apb_pclk";
242 status="disabled";
243 };
244 gpio6: gpio@fd460000 {
245 #gpio-cells = <2>;
246 compatible = "arm,pl061", "arm,primecell";
247 gpio-controller;
248 reg = <0x0 0xfd460000 0x1000>;
249 clocks = <&clk_bus>;
250 clock-names = "apb_pclk";
251 status="disabled";
252 };
253 gpio7: gpio@fd470000 {
254 #gpio-cells = <2>;
255 compatible = "arm,pl061", "arm,primecell";
256 gpio-controller;
257 reg = <0x0 0xfd470000 0x1000>;
258 clocks = <&clk_bus>;
259 clock-names = "apb_pclk";
260 status="disabled";
261 };
262 gpio8: gpio@fd480000 {
263 #gpio-cells = <2>;
264 compatible = "arm,pl061", "arm,primecell";
265 gpio-controller;
266 reg = <0x0 0xfd480000 0x1000>;
267 clocks = <&clk_bus>;
268 clock-names = "apb_pclk";
269 status="disabled";
270 };
271 gpio9: gpio@fd490000 {
272 #gpio-cells = <2>;
273 compatible = "arm,pl061", "arm,primecell";
274 gpio-controller;
275 reg = <0x0 0xfd490000 0x1000>;
276 clocks = <&clk_bus>;
277 clock-names = "apb_pclk";
278 status="disabled";
279 };
280 gpio10: gpio@fd4a0000 {
281 #gpio-cells = <2>;
282 compatible = "arm,pl061", "arm,primecell";
283 gpio-controller;
284 reg = <0x0 0xfd4a0000 0x1000>;
285 clocks = <&clk_bus>;
286 clock-names = "apb_pclk";
287 status="disabled";
288 };
289 gpio11: gpio@fd4b0000 {
290 #gpio-cells = <2>;
291 compatible = "arm,pl061", "arm,primecell";
292 gpio-controller;
293 reg = <0x0 0xfd4b0000 0x1000>;
294 clocks = <&clk_bus>;
295 clock-names = "apb_pclk";
296 };
297 gpio12: gpio@fd4c0000 {
298 #gpio-cells = <2>;
299 compatible = "arm,pl061", "arm,primecell";
300 gpio-controller;
301 reg = <0x0 0xfd4c0000 0x1000>;
302 clocks = <&clk_bus>;
303 clock-names = "apb_pclk";
304 status="disabled";
305 };
306 gpio13: gpio@fd4d0000 {
307 #gpio-cells = <2>;
308 compatible = "arm,pl061", "arm,primecell";
309 gpio-controller;
310 reg = <0x0 0xfd4d0000 0x1000>;
311 clocks = <&clk_bus>;
312 clock-names = "apb_pclk";
313 status="disabled";
314 };
315 gpio14: gpio@fd4e0000 {
316 #gpio-cells = <2>;
317 compatible = "arm,pl061", "arm,primecell";
318 gpio-controller;
319 reg = <0x0 0xfd4e0000 0x1000>;
320 clocks = <&clk_bus>;
321 clock-names = "apb_pclk";
322 status="disabled";
323 };
324 gpio15: gpio@fd4f0000 {
325 #gpio-cells = <2>;
326 compatible = "arm,pl061", "arm,primecell";
327 gpio-controller;
328 reg = <0x0 0xfd4f0000 0x1000>;
329 clocks = <&clk_bus>;
330 clock-names = "apb_pclk";
331 status="disabled";
332 };
333 gpio16: gpio@fd500000 {
334 #gpio-cells = <2>;
335 compatible = "arm,pl061", "arm,primecell";
336 gpio-controller;
337 reg = <0x0 0xfd500000 0x1000>;
338 clocks = <&clk_bus>;
339 clock-names = "apb_pclk";
340 status="disabled";
341 };
342 gpio17: gpio@fd510000 {
343 #gpio-cells = <2>;
344 compatible = "arm,pl061", "arm,primecell";
345 gpio-controller;
346 reg = <0x0 0xfd510000 0x1000>;
347 clocks = <&clk_bus>;
348 clock-names = "apb_pclk";
349 };
350 };
351};