blob: 68c0d09ffe786fe6416f69e948fd0a82e85d5e28 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/******************************************************************************
2* QLOGIC LINUX SOFTWARE
3*
4* QLogic QLA1280 (Ultra2) and QLA12160 (Ultra3) SCSI driver
5* Copyright (C) 2000 Qlogic Corporation (www.qlogic.com)
6* Copyright (C) 2001-2004 Jes Sorensen, Wild Open Source Inc.
7* Copyright (C) 2003-2004 Christoph Hellwig
8*
9* This program is free software; you can redistribute it and/or modify it
10* under the terms of the GNU General Public License as published by the
11* Free Software Foundation; either version 2, or (at your option) any
12* later version.
13*
14* This program is distributed in the hope that it will be useful, but
15* WITHOUT ANY WARRANTY; without even the implied warranty of
16* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
17* General Public License for more details.
18*
19******************************************************************************/
Jes Sorensen2dbb04c2006-01-16 11:49:29 -050020#define QLA1280_VERSION "3.26"
Linus Torvalds1da177e2005-04-16 15:20:36 -070021/*****************************************************************************
22 Revision History:
Jes Sorensen2dbb04c2006-01-16 11:49:29 -050023 Rev 3.26, January 16, 2006 Jes Sorensen
24 - Ditch all < 2.6 support
Linus Torvalds1da177e2005-04-16 15:20:36 -070025 Rev 3.25.1, February 10, 2005 Christoph Hellwig
26 - use pci_map_single to map non-S/G requests
27 - remove qla1280_proc_info
28 Rev 3.25, September 28, 2004, Christoph Hellwig
29 - add support for ISP1020/1040
30 - don't include "scsi.h" anymore for 2.6.x
31 Rev 3.24.4 June 7, 2004 Christoph Hellwig
32 - restructure firmware loading, cleanup initialization code
33 - prepare support for ISP1020/1040 chips
34 Rev 3.24.3 January 19, 2004, Jes Sorensen
35 - Handle PCI DMA mask settings correctly
36 - Correct order of error handling in probe_one, free_irq should not
37 be called if request_irq failed
38 Rev 3.24.2 January 19, 2004, James Bottomley & Andrew Vasquez
39 - Big endian fixes (James)
40 - Remove bogus IOCB content on zero data transfer commands (Andrew)
41 Rev 3.24.1 January 5, 2004, Jes Sorensen
42 - Initialize completion queue to avoid OOPS on probe
43 - Handle interrupts during mailbox testing
44 Rev 3.24 November 17, 2003, Christoph Hellwig
45 - use struct list_head for completion queue
46 - avoid old Scsi_FOO typedefs
47 - cleanup 2.4 compat glue a bit
48 - use <scsi/scsi_*.h> headers on 2.6 instead of "scsi.h"
49 - make initialization for memory mapped vs port I/O more similar
50 - remove broken pci config space manipulation
51 - kill more cruft
52 - this is an almost perfect 2.6 scsi driver now! ;)
53 Rev 3.23.39 December 17, 2003, Jes Sorensen
54 - Delete completion queue from srb if mailbox command failed to
55 to avoid qla1280_done completeting qla1280_error_action's
56 obsolete context
57 - Reduce arguments for qla1280_done
58 Rev 3.23.38 October 18, 2003, Christoph Hellwig
59 - Convert to new-style hotplugable driver for 2.6
60 - Fix missing scsi_unregister/scsi_host_put on HBA removal
61 - Kill some more cruft
62 Rev 3.23.37 October 1, 2003, Jes Sorensen
63 - Make MMIO depend on CONFIG_X86_VISWS instead of yet another
64 random CONFIG option
65 - Clean up locking in probe path
66 Rev 3.23.36 October 1, 2003, Christoph Hellwig
67 - queuecommand only ever receives new commands - clear flags
68 - Reintegrate lost fixes from Linux 2.5
69 Rev 3.23.35 August 14, 2003, Jes Sorensen
70 - Build against 2.6
71 Rev 3.23.34 July 23, 2003, Jes Sorensen
72 - Remove pointless TRUE/FALSE macros
73 - Clean up vchan handling
74 Rev 3.23.33 July 3, 2003, Jes Sorensen
75 - Don't define register access macros before define determining MMIO.
76 This just happend to work out on ia64 but not elsewhere.
77 - Don't try and read from the card while it is in reset as
78 it won't respond and causes an MCA
79 Rev 3.23.32 June 23, 2003, Jes Sorensen
80 - Basic support for boot time arguments
81 Rev 3.23.31 June 8, 2003, Jes Sorensen
82 - Reduce boot time messages
83 Rev 3.23.30 June 6, 2003, Jes Sorensen
84 - Do not enable sync/wide/ppr before it has been determined
85 that the target device actually supports it
86 - Enable DMA arbitration for multi channel controllers
87 Rev 3.23.29 June 3, 2003, Jes Sorensen
88 - Port to 2.5.69
89 Rev 3.23.28 June 3, 2003, Jes Sorensen
90 - Eliminate duplicate marker commands on bus resets
91 - Handle outstanding commands appropriately on bus/device resets
92 Rev 3.23.27 May 28, 2003, Jes Sorensen
93 - Remove bogus input queue code, let the Linux SCSI layer do the work
94 - Clean up NVRAM handling, only read it once from the card
95 - Add a number of missing default nvram parameters
96 Rev 3.23.26 Beta May 28, 2003, Jes Sorensen
97 - Use completion queue for mailbox commands instead of busy wait
98 Rev 3.23.25 Beta May 27, 2003, James Bottomley
99 - Migrate to use new error handling code
100 Rev 3.23.24 Beta May 21, 2003, James Bottomley
101 - Big endian support
102 - Cleanup data direction code
103 Rev 3.23.23 Beta May 12, 2003, Jes Sorensen
104 - Switch to using MMIO instead of PIO
105 Rev 3.23.22 Beta April 15, 2003, Jes Sorensen
106 - Fix PCI parity problem with 12160 during reset.
107 Rev 3.23.21 Beta April 14, 2003, Jes Sorensen
108 - Use pci_map_page()/pci_unmap_page() instead of map_single version.
109 Rev 3.23.20 Beta April 9, 2003, Jes Sorensen
110 - Remove < 2.4.x support
111 - Introduce HOST_LOCK to make the spin lock changes portable.
112 - Remove a bunch of idiotic and unnecessary typedef's
113 - Kill all leftovers of target-mode support which never worked anyway
114 Rev 3.23.19 Beta April 11, 2002, Linus Torvalds
115 - Do qla1280_pci_config() before calling request_irq() and
116 request_region()
117 - Use pci_dma_hi32() to handle upper word of DMA addresses instead
118 of large shifts
119 - Hand correct arguments to free_irq() in case of failure
120 Rev 3.23.18 Beta April 11, 2002, Jes Sorensen
121 - Run source through Lindent and clean up the output
122 Rev 3.23.17 Beta April 11, 2002, Jes Sorensen
123 - Update SCSI firmware to qla1280 v8.15.00 and qla12160 v10.04.32
124 Rev 3.23.16 Beta March 19, 2002, Jes Sorensen
125 - Rely on mailbox commands generating interrupts - do not
126 run qla1280_isr() from ql1280_mailbox_command()
127 - Remove device_reg_t
128 - Integrate ql12160_set_target_parameters() with 1280 version
129 - Make qla1280_setup() non static
130 - Do not call qla1280_check_for_dead_scsi_bus() on every I/O request
131 sent to the card - this command pauses the firmare!!!
132 Rev 3.23.15 Beta March 19, 2002, Jes Sorensen
133 - Clean up qla1280.h - remove obsolete QL_DEBUG_LEVEL_x definitions
134 - Remove a pile of pointless and confusing (srb_t **) and
135 (scsi_lu_t *) typecasts
136 - Explicit mark that we do not use the new error handling (for now)
137 - Remove scsi_qla_host_t and use 'struct' instead
138 - Remove in_abort, watchdog_enabled, dpc, dpc_sched, bios_enabled,
139 pci_64bit_slot flags which weren't used for anything anyway
140 - Grab host->host_lock while calling qla1280_isr() from abort()
141 - Use spin_lock()/spin_unlock() in qla1280_intr_handler() - we
142 do not need to save/restore flags in the interrupt handler
143 - Enable interrupts early (before any mailbox access) in preparation
144 for cleaning up the mailbox handling
145 Rev 3.23.14 Beta March 14, 2002, Jes Sorensen
146 - Further cleanups. Remove all trace of QL_DEBUG_LEVEL_x and replace
147 it with proper use of dprintk().
148 - Make qla1280_print_scsi_cmd() and qla1280_dump_buffer() both take
149 a debug level argument to determine if data is to be printed
150 - Add KERN_* info to printk()
151 Rev 3.23.13 Beta March 14, 2002, Jes Sorensen
152 - Significant cosmetic cleanups
153 - Change debug code to use dprintk() and remove #if mess
154 Rev 3.23.12 Beta March 13, 2002, Jes Sorensen
155 - More cosmetic cleanups, fix places treating return as function
156 - use cpu_relax() in qla1280_debounce_register()
157 Rev 3.23.11 Beta March 13, 2002, Jes Sorensen
158 - Make it compile under 2.5.5
159 Rev 3.23.10 Beta October 1, 2001, Jes Sorensen
160 - Do no typecast short * to long * in QL1280BoardTbl, this
161 broke miserably on big endian boxes
162 Rev 3.23.9 Beta September 30, 2001, Jes Sorensen
163 - Remove pre 2.2 hack for checking for reentrance in interrupt handler
164 - Make data types used to receive from SCSI_{BUS,TCN,LUN}_32
165 unsigned int to match the types from struct scsi_cmnd
166 Rev 3.23.8 Beta September 29, 2001, Jes Sorensen
167 - Remove bogus timer_t typedef from qla1280.h
168 - Remove obsolete pre 2.2 PCI setup code, use proper #define's
169 for PCI_ values, call pci_set_master()
170 - Fix memleak of qla1280_buffer on module unload
171 - Only compile module parsing code #ifdef MODULE - should be
172 changed to use individual MODULE_PARM's later
173 - Remove dummy_buffer that was never modified nor printed
174 - ENTER()/LEAVE() are noops unless QL_DEBUG_LEVEL_3, hence remove
175 #ifdef QL_DEBUG_LEVEL_3/#endif around ENTER()/LEAVE() calls
176 - Remove \r from print statements, this is Linux, not DOS
177 - Remove obsolete QLA1280_{SCSILU,INTR,RING}_{LOCK,UNLOCK}
178 dummy macros
179 - Remove C++ compile hack in header file as Linux driver are not
180 supposed to be compiled as C++
181 - Kill MS_64BITS macro as it makes the code more readable
182 - Remove unnecessary flags.in_interrupts bit
183 Rev 3.23.7 Beta August 20, 2001, Jes Sorensen
184 - Dont' check for set flags on q->q_flag one by one in qla1280_next()
185 - Check whether the interrupt was generated by the QLA1280 before
186 doing any processing
187 - qla1280_status_entry(): Only zero out part of sense_buffer that
188 is not being copied into
189 - Remove more superflouous typecasts
190 - qla1280_32bit_start_scsi() replace home-brew memcpy() with memcpy()
191 Rev 3.23.6 Beta August 20, 2001, Tony Luck, Intel
192 - Don't walk the entire list in qla1280_putq_t() just to directly
193 grab the pointer to the last element afterwards
194 Rev 3.23.5 Beta August 9, 2001, Jes Sorensen
Thomas Gleixner1d6f3592006-07-01 19:29:42 -0700195 - Don't use IRQF_DISABLED, it's use is deprecated for this kinda driver
Linus Torvalds1da177e2005-04-16 15:20:36 -0700196 Rev 3.23.4 Beta August 8, 2001, Jes Sorensen
197 - Set dev->max_sectors to 1024
198 Rev 3.23.3 Beta August 6, 2001, Jes Sorensen
199 - Provide compat macros for pci_enable_device(), pci_find_subsys()
200 and scsi_set_pci_device()
201 - Call scsi_set_pci_device() for all devices
202 - Reduce size of kernel version dependent device probe code
203 - Move duplicate probe/init code to separate function
204 - Handle error if qla1280_mem_alloc() fails
205 - Kill OFFSET() macro and use Linux's PCI definitions instead
206 - Kill private structure defining PCI config space (struct config_reg)
207 - Only allocate I/O port region if not in MMIO mode
208 - Remove duplicate (unused) sanity check of sife of srb_t
209 Rev 3.23.2 Beta August 6, 2001, Jes Sorensen
210 - Change home-brew memset() implementations to use memset()
211 - Remove all references to COMTRACE() - accessing a PC's COM2 serial
212 port directly is not legal under Linux.
213 Rev 3.23.1 Beta April 24, 2001, Jes Sorensen
214 - Remove pre 2.2 kernel support
215 - clean up 64 bit DMA setting to use 2.4 API (provide backwards compat)
216 - Fix MMIO access to use readl/writel instead of directly
217 dereferencing pointers
218 - Nuke MSDOS debugging code
219 - Change true/false data types to int from uint8_t
220 - Use int for counters instead of uint8_t etc.
221 - Clean up size & byte order conversion macro usage
222 Rev 3.23 Beta January 11, 2001 BN Qlogic
223 - Added check of device_id when handling non
224 QLA12160s during detect().
225 Rev 3.22 Beta January 5, 2001 BN Qlogic
226 - Changed queue_task() to schedule_task()
227 for kernels 2.4.0 and higher.
228 Note: 2.4.0-testxx kernels released prior to
229 the actual 2.4.0 kernel release on January 2001
230 will get compile/link errors with schedule_task().
231 Please update your kernel to released 2.4.0 level,
232 or comment lines in this file flagged with 3.22
233 to resolve compile/link error of schedule_task().
234 - Added -DCONFIG_SMP in addition to -D__SMP__
235 in Makefile for 2.4.0 builds of driver as module.
236 Rev 3.21 Beta January 4, 2001 BN Qlogic
237 - Changed criteria of 64/32 Bit mode of HBA
238 operation according to BITS_PER_LONG rather
239 than HBA's NVRAM setting of >4Gig memory bit;
240 so that the HBA auto-configures without the need
241 to setup each system individually.
242 Rev 3.20 Beta December 5, 2000 BN Qlogic
243 - Added priority handling to IA-64 onboard SCSI
244 ISP12160 chip for kernels greater than 2.3.18.
245 - Added irqrestore for qla1280_intr_handler.
246 - Enabled /proc/scsi/qla1280 interface.
247 - Clear /proc/scsi/qla1280 counters in detect().
248 Rev 3.19 Beta October 13, 2000 BN Qlogic
249 - Declare driver_template for new kernel
250 (2.4.0 and greater) scsi initialization scheme.
251 - Update /proc/scsi entry for 2.3.18 kernels and
252 above as qla1280
253 Rev 3.18 Beta October 10, 2000 BN Qlogic
254 - Changed scan order of adapters to map
255 the QLA12160 followed by the QLA1280.
256 Rev 3.17 Beta September 18, 2000 BN Qlogic
257 - Removed warnings for 32 bit 2.4.x compiles
258 - Corrected declared size for request and response
259 DMA addresses that are kept in each ha
260 Rev. 3.16 Beta August 25, 2000 BN Qlogic
261 - Corrected 64 bit addressing issue on IA-64
262 where the upper 32 bits were not properly
263 passed to the RISC engine.
264 Rev. 3.15 Beta August 22, 2000 BN Qlogic
265 - Modified qla1280_setup_chip to properly load
266 ISP firmware for greater that 4 Gig memory on IA-64
267 Rev. 3.14 Beta August 16, 2000 BN Qlogic
268 - Added setting of dma_mask to full 64 bit
269 if flags.enable_64bit_addressing is set in NVRAM
270 Rev. 3.13 Beta August 16, 2000 BN Qlogic
271 - Use new PCI DMA mapping APIs for 2.4.x kernel
272 Rev. 3.12 July 18, 2000 Redhat & BN Qlogic
273 - Added check of pci_enable_device to detect() for 2.3.x
274 - Use pci_resource_start() instead of
275 pdev->resource[0].start in detect() for 2.3.x
276 - Updated driver version
277 Rev. 3.11 July 14, 2000 BN Qlogic
278 - Updated SCSI Firmware to following versions:
279 qla1x80: 8.13.08
280 qla1x160: 10.04.08
281 - Updated driver version to 3.11
282 Rev. 3.10 June 23, 2000 BN Qlogic
283 - Added filtering of AMI SubSys Vendor ID devices
284 Rev. 3.9
285 - DEBUG_QLA1280 undefined and new version BN Qlogic
286 Rev. 3.08b May 9, 2000 MD Dell
287 - Added logic to check against AMI subsystem vendor ID
288 Rev. 3.08 May 4, 2000 DG Qlogic
289 - Added logic to check for PCI subsystem ID.
290 Rev. 3.07 Apr 24, 2000 DG & BN Qlogic
291 - Updated SCSI Firmware to following versions:
292 qla12160: 10.01.19
293 qla1280: 8.09.00
294 Rev. 3.06 Apr 12, 2000 DG & BN Qlogic
295 - Internal revision; not released
296 Rev. 3.05 Mar 28, 2000 DG & BN Qlogic
297 - Edit correction for virt_to_bus and PROC.
298 Rev. 3.04 Mar 28, 2000 DG & BN Qlogic
299 - Merge changes from ia64 port.
300 Rev. 3.03 Mar 28, 2000 BN Qlogic
301 - Increase version to reflect new code drop with compile fix
302 of issue with inclusion of linux/spinlock for 2.3 kernels
303 Rev. 3.02 Mar 15, 2000 BN Qlogic
304 - Merge qla1280_proc_info from 2.10 code base
305 Rev. 3.01 Feb 10, 2000 BN Qlogic
306 - Corrected code to compile on a 2.2.x kernel.
307 Rev. 3.00 Jan 17, 2000 DG Qlogic
308 - Added 64-bit support.
309 Rev. 2.07 Nov 9, 1999 DG Qlogic
310 - Added new routine to set target parameters for ISP12160.
311 Rev. 2.06 Sept 10, 1999 DG Qlogic
312 - Added support for ISP12160 Ultra 3 chip.
313 Rev. 2.03 August 3, 1999 Fred Lewis, Intel DuPont
314 - Modified code to remove errors generated when compiling with
315 Cygnus IA64 Compiler.
316 - Changed conversion of pointers to unsigned longs instead of integers.
317 - Changed type of I/O port variables from uint32_t to unsigned long.
318 - Modified OFFSET macro to work with 64-bit as well as 32-bit.
319 - Changed sprintf and printk format specifiers for pointers to %p.
320 - Changed some int to long type casts where needed in sprintf & printk.
321 - Added l modifiers to sprintf and printk format specifiers for longs.
322 - Removed unused local variables.
323 Rev. 1.20 June 8, 1999 DG, Qlogic
324 Changes to support RedHat release 6.0 (kernel 2.2.5).
325 - Added SCSI exclusive access lock (io_request_lock) when accessing
326 the adapter.
327 - Added changes for the new LINUX interface template. Some new error
328 handling routines have been added to the template, but for now we
329 will use the old ones.
330 - Initial Beta Release.
331*****************************************************************************/
332
333
Linus Torvalds1da177e2005-04-16 15:20:36 -0700334#include <linux/module.h>
335
336#include <linux/version.h>
337#include <linux/types.h>
338#include <linux/string.h>
339#include <linux/errno.h>
340#include <linux/kernel.h>
341#include <linux/ioport.h>
342#include <linux/delay.h>
343#include <linux/timer.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700344#include <linux/pci.h>
345#include <linux/proc_fs.h>
346#include <linux/stat.h>
347#include <linux/slab.h>
348#include <linux/pci_ids.h>
349#include <linux/interrupt.h>
350#include <linux/init.h>
Matthias Gehre910638a2006-03-28 01:56:48 -0800351#include <linux/dma-mapping.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700352
353#include <asm/io.h>
354#include <asm/irq.h>
355#include <asm/byteorder.h>
356#include <asm/processor.h>
357#include <asm/types.h>
358#include <asm/system.h>
359
Linus Torvalds1da177e2005-04-16 15:20:36 -0700360#include <scsi/scsi.h>
361#include <scsi/scsi_cmnd.h>
362#include <scsi/scsi_device.h>
363#include <scsi/scsi_host.h>
364#include <scsi/scsi_tcq.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365
366#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
367#include <asm/sn/io.h>
368#endif
369
Jes Sorensen2dbb04c2006-01-16 11:49:29 -0500370#if LINUX_VERSION_CODE < 0x020600
371#error "Kernels older than 2.6.0 are no longer supported"
Linus Torvalds1da177e2005-04-16 15:20:36 -0700372#endif
373
374
375/*
376 * Compile time Options:
377 * 0 - Disable and 1 - Enable
378 */
379#define DEBUG_QLA1280_INTR 0
380#define DEBUG_PRINT_NVRAM 0
381#define DEBUG_QLA1280 0
382
383/*
384 * The SGI VISWS is broken and doesn't support MMIO ;-(
385 */
386#ifdef CONFIG_X86_VISWS
387#define MEMORY_MAPPED_IO 0
388#else
389#define MEMORY_MAPPED_IO 1
390#endif
391
392#define UNIQUE_FW_NAME
393#include "qla1280.h"
394#include "ql12160_fw.h" /* ISP RISC codes */
395#include "ql1280_fw.h"
396#include "ql1040_fw.h"
397
Linus Torvalds1da177e2005-04-16 15:20:36 -0700398#ifndef BITS_PER_LONG
399#error "BITS_PER_LONG not defined!"
400#endif
401#if (BITS_PER_LONG == 64) || defined CONFIG_HIGHMEM
402#define QLA_64BIT_PTR 1
403#endif
404
405#ifdef QLA_64BIT_PTR
406#define pci_dma_hi32(a) ((a >> 16) >> 16)
407#else
408#define pci_dma_hi32(a) 0
409#endif
410#define pci_dma_lo32(a) (a & 0xffffffff)
411
412#define NVRAM_DELAY() udelay(500) /* 2 microseconds */
413
Linus Torvalds1da177e2005-04-16 15:20:36 -0700414#if defined(__ia64__) && !defined(ia64_platform_is)
415#define ia64_platform_is(foo) (!strcmp(x, platform_name))
416#endif
417
418
419#define IS_ISP1040(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020)
420#define IS_ISP1x40(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1020 || \
421 ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP1240)
422#define IS_ISP1x160(ha) (ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP10160 || \
423 ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP12160)
424
425
426static int qla1280_probe_one(struct pci_dev *, const struct pci_device_id *);
427static void qla1280_remove_one(struct pci_dev *);
428
429/*
430 * QLogic Driver Support Function Prototypes.
431 */
432static void qla1280_done(struct scsi_qla_host *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700433static int qla1280_get_token(char *);
434static int qla1280_setup(char *s) __init;
435
436/*
437 * QLogic ISP1280 Hardware Support Function Prototypes.
438 */
439static int qla1280_load_firmware(struct scsi_qla_host *);
440static int qla1280_init_rings(struct scsi_qla_host *);
441static int qla1280_nvram_config(struct scsi_qla_host *);
442static int qla1280_mailbox_command(struct scsi_qla_host *,
443 uint8_t, uint16_t *);
444static int qla1280_bus_reset(struct scsi_qla_host *, int);
445static int qla1280_device_reset(struct scsi_qla_host *, int, int);
446static int qla1280_abort_device(struct scsi_qla_host *, int, int, int);
447static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int);
448static int qla1280_abort_isp(struct scsi_qla_host *);
449#ifdef QLA_64BIT_PTR
450static int qla1280_64bit_start_scsi(struct scsi_qla_host *, struct srb *);
451#else
452static int qla1280_32bit_start_scsi(struct scsi_qla_host *, struct srb *);
453#endif
454static void qla1280_nv_write(struct scsi_qla_host *, uint16_t);
455static void qla1280_poll(struct scsi_qla_host *);
456static void qla1280_reset_adapter(struct scsi_qla_host *);
457static void qla1280_marker(struct scsi_qla_host *, int, int, int, u8);
458static void qla1280_isp_cmd(struct scsi_qla_host *);
459static void qla1280_isr(struct scsi_qla_host *, struct list_head *);
460static void qla1280_rst_aen(struct scsi_qla_host *);
461static void qla1280_status_entry(struct scsi_qla_host *, struct response *,
462 struct list_head *);
463static void qla1280_error_entry(struct scsi_qla_host *, struct response *,
464 struct list_head *);
465static uint16_t qla1280_get_nvram_word(struct scsi_qla_host *, uint32_t);
466static uint16_t qla1280_nvram_request(struct scsi_qla_host *, uint32_t);
467static uint16_t qla1280_debounce_register(volatile uint16_t __iomem *);
468static request_t *qla1280_req_pkt(struct scsi_qla_host *);
469static int qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *,
470 unsigned int);
471static void qla1280_get_target_parameters(struct scsi_qla_host *,
472 struct scsi_device *);
473static int qla1280_set_target_parameters(struct scsi_qla_host *, int, int);
474
475
476static struct qla_driver_setup driver_setup;
477
478/*
479 * convert scsi data direction to request_t control flags
480 */
481static inline uint16_t
482qla1280_data_direction(struct scsi_cmnd *cmnd)
483{
484 switch(cmnd->sc_data_direction) {
485 case DMA_FROM_DEVICE:
486 return BIT_5;
487 case DMA_TO_DEVICE:
488 return BIT_6;
489 case DMA_BIDIRECTIONAL:
490 return BIT_5 | BIT_6;
491 /*
492 * We could BUG() on default here if one of the four cases aren't
493 * met, but then again if we receive something like that from the
494 * SCSI layer we have more serious problems. This shuts up GCC.
495 */
496 case DMA_NONE:
497 default:
498 return 0;
499 }
500}
501
502#if DEBUG_QLA1280
503static void __qla1280_print_scsi_cmd(struct scsi_cmnd * cmd);
504static void __qla1280_dump_buffer(char *, int);
505#endif
506
507
508/*
509 * insmod needs to find the variable and make it point to something
510 */
511#ifdef MODULE
512static char *qla1280;
513
514/* insmod qla1280 options=verbose" */
515module_param(qla1280, charp, 0);
516#else
517__setup("qla1280=", qla1280_setup);
518#endif
519
520
521/*
522 * We use the scsi_pointer structure that's included with each scsi_command
523 * to overlay our struct srb over it. qla1280_init() checks that a srb is not
524 * bigger than a scsi_pointer.
525 */
526
527#define CMD_SP(Cmnd) &Cmnd->SCp
528#define CMD_CDBLEN(Cmnd) Cmnd->cmd_len
529#define CMD_CDBP(Cmnd) Cmnd->cmnd
530#define CMD_SNSP(Cmnd) Cmnd->sense_buffer
FUJITA Tomonorib80ca4f2008-01-13 15:46:13 +0900531#define CMD_SNSLEN(Cmnd) SCSI_SENSE_BUFFERSIZE
Linus Torvalds1da177e2005-04-16 15:20:36 -0700532#define CMD_RESULT(Cmnd) Cmnd->result
533#define CMD_HANDLE(Cmnd) Cmnd->host_scribble
Linus Torvalds1da177e2005-04-16 15:20:36 -0700534#define CMD_REQUEST(Cmnd) Cmnd->request->cmd
Linus Torvalds1da177e2005-04-16 15:20:36 -0700535
536#define CMD_HOST(Cmnd) Cmnd->device->host
537#define SCSI_BUS_32(Cmnd) Cmnd->device->channel
538#define SCSI_TCN_32(Cmnd) Cmnd->device->id
539#define SCSI_LUN_32(Cmnd) Cmnd->device->lun
540
541
542/*****************************************/
543/* ISP Boards supported by this driver */
544/*****************************************/
545
546struct qla_boards {
547 unsigned char name[9]; /* Board ID String */
548 int numPorts; /* Number of SCSI ports */
549 unsigned short *fwcode; /* pointer to FW array */
550 unsigned short *fwlen; /* number of words in array */
551 unsigned short *fwstart; /* start address for F/W */
552 unsigned char *fwver; /* Ptr to F/W version array */
553};
554
555/* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
556static struct pci_device_id qla1280_pci_tbl[] = {
557 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP12160,
558 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700559 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020,
560 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700561 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1080,
562 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
563 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1240,
564 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
565 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1280,
566 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
567 {PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP10160,
568 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
569 {0,}
570};
571MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
572
573static struct qla_boards ql1280_board_tbl[] = {
574 /* Name , Number of ports, FW details */
575 {"QLA12160", 2, &fw12160i_code01[0], &fw12160i_length01,
576 &fw12160i_addr01, &fw12160i_version_str[0]},
577 {"QLA1040", 1, &risc_code01[0], &risc_code_length01,
578 &risc_code_addr01, &firmware_version[0]},
579 {"QLA1080", 1, &fw1280ei_code01[0], &fw1280ei_length01,
580 &fw1280ei_addr01, &fw1280ei_version_str[0]},
581 {"QLA1240", 2, &fw1280ei_code01[0], &fw1280ei_length01,
582 &fw1280ei_addr01, &fw1280ei_version_str[0]},
583 {"QLA1280", 2, &fw1280ei_code01[0], &fw1280ei_length01,
584 &fw1280ei_addr01, &fw1280ei_version_str[0]},
585 {"QLA10160", 1, &fw12160i_code01[0], &fw12160i_length01,
586 &fw12160i_addr01, &fw12160i_version_str[0]},
587 {" ", 0}
588};
589
590static int qla1280_verbose = 1;
591
592#if DEBUG_QLA1280
593static int ql_debug_level = 1;
594#define dprintk(level, format, a...) \
595 do { if (ql_debug_level >= level) printk(KERN_ERR format, ##a); } while(0)
596#define qla1280_dump_buffer(level, buf, size) \
597 if (ql_debug_level >= level) __qla1280_dump_buffer(buf, size)
598#define qla1280_print_scsi_cmd(level, cmd) \
599 if (ql_debug_level >= level) __qla1280_print_scsi_cmd(cmd)
600#else
601#define ql_debug_level 0
602#define dprintk(level, format, a...) do{}while(0)
603#define qla1280_dump_buffer(a, b, c) do{}while(0)
604#define qla1280_print_scsi_cmd(a, b) do{}while(0)
605#endif
606
607#define ENTER(x) dprintk(3, "qla1280 : Entering %s()\n", x);
608#define LEAVE(x) dprintk(3, "qla1280 : Leaving %s()\n", x);
609#define ENTER_INTR(x) dprintk(4, "qla1280 : Entering %s()\n", x);
610#define LEAVE_INTR(x) dprintk(4, "qla1280 : Leaving %s()\n", x);
611
612
613static int qla1280_read_nvram(struct scsi_qla_host *ha)
614{
615 uint16_t *wptr;
616 uint8_t chksum;
617 int cnt, i;
618 struct nvram *nv;
619
620 ENTER("qla1280_read_nvram");
621
622 if (driver_setup.no_nvram)
623 return 1;
624
625 printk(KERN_INFO "scsi(%ld): Reading NVRAM\n", ha->host_no);
626
627 wptr = (uint16_t *)&ha->nvram;
628 nv = &ha->nvram;
629 chksum = 0;
630 for (cnt = 0; cnt < 3; cnt++) {
631 *wptr = qla1280_get_nvram_word(ha, cnt);
632 chksum += *wptr & 0xff;
633 chksum += (*wptr >> 8) & 0xff;
634 wptr++;
635 }
636
637 if (nv->id0 != 'I' || nv->id1 != 'S' ||
638 nv->id2 != 'P' || nv->id3 != ' ' || nv->version < 1) {
639 dprintk(2, "Invalid nvram ID or version!\n");
640 chksum = 1;
641 } else {
642 for (; cnt < sizeof(struct nvram); cnt++) {
643 *wptr = qla1280_get_nvram_word(ha, cnt);
644 chksum += *wptr & 0xff;
645 chksum += (*wptr >> 8) & 0xff;
646 wptr++;
647 }
648 }
649
650 dprintk(3, "qla1280_read_nvram: NVRAM Magic ID= %c %c %c %02x"
651 " version %i\n", nv->id0, nv->id1, nv->id2, nv->id3,
652 nv->version);
653
654
655 if (chksum) {
656 if (!driver_setup.no_nvram)
657 printk(KERN_WARNING "scsi(%ld): Unable to identify or "
658 "validate NVRAM checksum, using default "
659 "settings\n", ha->host_no);
660 ha->nvram_valid = 0;
661 } else
662 ha->nvram_valid = 1;
663
664 /* The firmware interface is, um, interesting, in that the
665 * actual firmware image on the chip is little endian, thus,
666 * the process of taking that image to the CPU would end up
667 * little endian. However, the firmare interface requires it
668 * to be read a word (two bytes) at a time.
669 *
670 * The net result of this would be that the word (and
671 * doubleword) quantites in the firmware would be correct, but
672 * the bytes would be pairwise reversed. Since most of the
673 * firmware quantites are, in fact, bytes, we do an extra
674 * le16_to_cpu() in the firmware read routine.
675 *
676 * The upshot of all this is that the bytes in the firmware
677 * are in the correct places, but the 16 and 32 bit quantites
678 * are still in little endian format. We fix that up below by
679 * doing extra reverses on them */
680 nv->isp_parameter = cpu_to_le16(nv->isp_parameter);
681 nv->firmware_feature.w = cpu_to_le16(nv->firmware_feature.w);
682 for(i = 0; i < MAX_BUSES; i++) {
683 nv->bus[i].selection_timeout = cpu_to_le16(nv->bus[i].selection_timeout);
684 nv->bus[i].max_queue_depth = cpu_to_le16(nv->bus[i].max_queue_depth);
685 }
686 dprintk(1, "qla1280_read_nvram: Completed Reading NVRAM\n");
687 LEAVE("qla1280_read_nvram");
688
689 return chksum;
690}
691
692/**************************************************************************
693 * qla1280_info
694 * Return a string describing the driver.
695 **************************************************************************/
696static const char *
697qla1280_info(struct Scsi_Host *host)
698{
699 static char qla1280_scsi_name_buffer[125];
700 char *bp;
701 struct scsi_qla_host *ha;
702 struct qla_boards *bdp;
703
704 bp = &qla1280_scsi_name_buffer[0];
705 ha = (struct scsi_qla_host *)host->hostdata;
706 bdp = &ql1280_board_tbl[ha->devnum];
707 memset(bp, 0, sizeof(qla1280_scsi_name_buffer));
708
709 sprintf (bp,
710 "QLogic %s PCI to SCSI Host Adapter\n"
711 " Firmware version: %2d.%02d.%02d, Driver version %s",
712 &bdp->name[0], bdp->fwver[0], bdp->fwver[1], bdp->fwver[2],
713 QLA1280_VERSION);
714 return bp;
715}
716
717/**************************************************************************
718 * qla1200_queuecommand
719 * Queue a command to the controller.
720 *
721 * Note:
722 * The mid-level driver tries to ensures that queuecommand never gets invoked
723 * concurrently with itself or the interrupt handler (although the
724 * interrupt handler may call this routine as part of request-completion
725 * handling). Unfortunely, it sometimes calls the scheduler in interrupt
726 * context which is a big NO! NO!.
727 **************************************************************************/
728static int
729qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
730{
731 struct Scsi_Host *host = cmd->device->host;
732 struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
733 struct srb *sp = (struct srb *)&cmd->SCp;
734 int status;
735
736 cmd->scsi_done = fn;
737 sp->cmd = cmd;
738 sp->flags = 0;
739
740 qla1280_print_scsi_cmd(5, cmd);
741
742#ifdef QLA_64BIT_PTR
743 /*
744 * Using 64 bit commands if the PCI bridge doesn't support it is a
745 * bit wasteful, however this should really only happen if one's
746 * PCI controller is completely broken, like the BCM1250. For
747 * sane hardware this is not an issue.
748 */
749 status = qla1280_64bit_start_scsi(ha, sp);
750#else
751 status = qla1280_32bit_start_scsi(ha, sp);
752#endif
753 return status;
754}
755
756enum action {
757 ABORT_COMMAND,
758 ABORT_DEVICE,
759 DEVICE_RESET,
760 BUS_RESET,
761 ADAPTER_RESET,
762 FAIL
763};
764
765/* timer action for error action processor */
766static void qla1280_error_wait_timeout(unsigned long __data)
767{
768 struct scsi_cmnd *cmd = (struct scsi_cmnd *)__data;
769 struct srb *sp = (struct srb *)CMD_SP(cmd);
770
771 complete(sp->wait);
772}
773
774static void qla1280_mailbox_timeout(unsigned long __data)
775{
776 struct scsi_qla_host *ha = (struct scsi_qla_host *)__data;
777 struct device_reg __iomem *reg;
778 reg = ha->iobase;
779
780 ha->mailbox_out[0] = RD_REG_WORD(&reg->mailbox0);
781 printk(KERN_ERR "scsi(%ld): mailbox timed out, mailbox0 %04x, "
782 "ictrl %04x, istatus %04x\n", ha->host_no, ha->mailbox_out[0],
783 RD_REG_WORD(&reg->ictrl), RD_REG_WORD(&reg->istatus));
784 complete(ha->mailbox_wait);
785}
786
787/**************************************************************************
788 * qla1200_error_action
789 * The function will attempt to perform a specified error action and
790 * wait for the results (or time out).
791 *
792 * Input:
793 * cmd = Linux SCSI command packet of the command that cause the
794 * bus reset.
795 * action = error action to take (see action_t)
796 *
797 * Returns:
798 * SUCCESS or FAILED
799 *
800 * Note:
801 * Resetting the bus always succeeds - is has to, otherwise the
802 * kernel will panic! Try a surgical technique - sending a BUS
803 * DEVICE RESET message - on the offending target before pulling
804 * the SCSI bus reset line.
805 **************************************************************************/
806static int
807qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
808{
809 struct scsi_qla_host *ha;
810 int bus, target, lun;
811 struct srb *sp;
812 uint16_t data;
813 unsigned char *handle;
814 int result, i;
Peter Zijlstra6e9a4732006-09-30 23:28:10 -0700815 DECLARE_COMPLETION_ONSTACK(wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700816 struct timer_list timer;
817
818 ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata);
819
820 dprintk(4, "error_action %i, istatus 0x%04x\n", action,
821 RD_REG_WORD(&ha->iobase->istatus));
822
823 dprintk(4, "host_cmd 0x%04x, ictrl 0x%04x, jiffies %li\n",
824 RD_REG_WORD(&ha->iobase->host_cmd),
825 RD_REG_WORD(&ha->iobase->ictrl), jiffies);
826
827 ENTER("qla1280_error_action");
828 if (qla1280_verbose)
829 printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
830 "Handle=0x%p, action=0x%x\n",
831 ha->host_no, cmd, CMD_HANDLE(cmd), action);
832
833 if (cmd == NULL) {
834 printk(KERN_WARNING "(scsi?:?:?:?) Reset called with NULL "
835 "si_Cmnd pointer, failing.\n");
836 LEAVE("qla1280_error_action");
837 return FAILED;
838 }
839
840 ha = (struct scsi_qla_host *)cmd->device->host->hostdata;
841 sp = (struct srb *)CMD_SP(cmd);
842 handle = CMD_HANDLE(cmd);
843
844 /* Check for pending interrupts. */
845 data = qla1280_debounce_register(&ha->iobase->istatus);
846 /*
847 * The io_request_lock is held when the reset handler is called, hence
848 * the interrupt handler cannot be running in parallel as it also
849 * grabs the lock. /Jes
850 */
851 if (data & RISC_INT)
852 qla1280_isr(ha, &ha->done_q);
853
854 /*
855 * Determine the suggested action that the mid-level driver wants
856 * us to perform.
857 */
858 if (handle == (unsigned char *)INVALID_HANDLE || handle == NULL) {
859 if(action == ABORT_COMMAND) {
860 /* we never got this command */
861 printk(KERN_INFO "qla1280: Aborting a NULL handle\n");
862 return SUCCESS; /* no action - we don't have command */
863 }
864 } else {
865 sp->wait = &wait;
866 }
867
868 bus = SCSI_BUS_32(cmd);
869 target = SCSI_TCN_32(cmd);
870 lun = SCSI_LUN_32(cmd);
871
872 /* Overloading result. Here it means the success or fail of the
873 * *issue* of the action. When we return from the routine, it must
874 * mean the actual success or fail of the action */
875 result = FAILED;
876 switch (action) {
877 case FAIL:
878 break;
879
880 case ABORT_COMMAND:
881 if ((sp->flags & SRB_ABORT_PENDING)) {
882 printk(KERN_WARNING
883 "scsi(): Command has a pending abort "
884 "message - ABORT_PENDING.\n");
885 /* This should technically be impossible since we
886 * now wait for abort completion */
887 break;
888 }
889
890 for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
891 if (sp == ha->outstanding_cmds[i]) {
892 dprintk(1, "qla1280: RISC aborting command\n");
893 if (qla1280_abort_command(ha, sp, i) == 0)
894 result = SUCCESS;
895 else {
896 /*
897 * Since we don't know what might
898 * have happend to the command, it
899 * is unsafe to remove it from the
900 * device's queue at this point.
901 * Wait and let the escalation
902 * process take care of it.
903 */
904 printk(KERN_WARNING
905 "scsi(%li:%i:%i:%i): Unable"
906 " to abort command!\n",
907 ha->host_no, bus, target, lun);
908 }
909 }
910 }
911 break;
912
913 case ABORT_DEVICE:
Linus Torvalds1da177e2005-04-16 15:20:36 -0700914 if (qla1280_verbose)
915 printk(KERN_INFO
916 "scsi(%ld:%d:%d:%d): Queueing abort device "
917 "command.\n", ha->host_no, bus, target, lun);
918 if (qla1280_abort_device(ha, bus, target, lun) == 0)
919 result = SUCCESS;
920 break;
921
922 case DEVICE_RESET:
923 if (qla1280_verbose)
924 printk(KERN_INFO
925 "scsi(%ld:%d:%d:%d): Queueing device reset "
926 "command.\n", ha->host_no, bus, target, lun);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700927 if (qla1280_device_reset(ha, bus, target) == 0)
928 result = SUCCESS;
929 break;
930
931 case BUS_RESET:
932 if (qla1280_verbose)
Jes Sorensencd00b7f2006-10-17 09:32:06 -0400933 printk(KERN_INFO "qla1280(%ld:%d): Issued bus "
934 "reset.\n", ha->host_no, bus);
935 if (qla1280_bus_reset(ha, bus) == 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700936 result = SUCCESS;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700937 break;
938
939 case ADAPTER_RESET:
940 default:
941 if (qla1280_verbose) {
942 printk(KERN_INFO
943 "scsi(%ld): Issued ADAPTER RESET\n",
944 ha->host_no);
945 printk(KERN_INFO "scsi(%ld): I/O processing will "
946 "continue automatically\n", ha->host_no);
947 }
948 ha->flags.reset_active = 1;
949 /*
950 * We restarted all of the commands automatically, so the
951 * mid-level code can expect completions momentitarily.
952 */
953 if (qla1280_abort_isp(ha) == 0)
954 result = SUCCESS;
955
956 ha->flags.reset_active = 0;
957 }
958
959 if (!list_empty(&ha->done_q))
960 qla1280_done(ha);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700961
962 /* If we didn't manage to issue the action, or we have no
963 * command to wait for, exit here */
964 if (result == FAILED || handle == NULL ||
965 handle == (unsigned char *)INVALID_HANDLE) {
966 /*
967 * Clear completion queue to avoid qla1280_done() trying
968 * to complete the command at a later stage after we
969 * have exited the current context
970 */
971 sp->wait = NULL;
972 goto leave;
973 }
974
975 /* set up a timer just in case we're really jammed */
976 init_timer(&timer);
977 timer.expires = jiffies + 4*HZ;
978 timer.data = (unsigned long)cmd;
979 timer.function = qla1280_error_wait_timeout;
980 add_timer(&timer);
981
982 /* wait for the action to complete (or the timer to expire) */
Jes Sorensen2dbb04c2006-01-16 11:49:29 -0500983 spin_unlock_irq(ha->host->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700984 wait_for_completion(&wait);
985 del_timer_sync(&timer);
Jes Sorensen2dbb04c2006-01-16 11:49:29 -0500986 spin_lock_irq(ha->host->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700987 sp->wait = NULL;
988
989 /* the only action we might get a fail for is abort */
990 if (action == ABORT_COMMAND) {
991 if(sp->flags & SRB_ABORTED)
992 result = SUCCESS;
993 else
994 result = FAILED;
995 }
996
997 leave:
998 dprintk(1, "RESET returning %d\n", result);
999
1000 LEAVE("qla1280_error_action");
1001 return result;
1002}
1003
1004/**************************************************************************
1005 * qla1280_abort
1006 * Abort the specified SCSI command(s).
1007 **************************************************************************/
1008static int
1009qla1280_eh_abort(struct scsi_cmnd * cmd)
1010{
Jeff Garzik 8fa728a2005-05-28 07:54:40 -04001011 int rc;
1012
1013 spin_lock_irq(cmd->device->host->host_lock);
1014 rc = qla1280_error_action(cmd, ABORT_COMMAND);
1015 spin_unlock_irq(cmd->device->host->host_lock);
1016
1017 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001018}
1019
1020/**************************************************************************
1021 * qla1280_device_reset
1022 * Reset the specified SCSI device
1023 **************************************************************************/
1024static int
1025qla1280_eh_device_reset(struct scsi_cmnd *cmd)
1026{
Jeff Garzik 94d0e7b82005-05-28 07:55:48 -04001027 int rc;
1028
1029 spin_lock_irq(cmd->device->host->host_lock);
1030 rc = qla1280_error_action(cmd, DEVICE_RESET);
1031 spin_unlock_irq(cmd->device->host->host_lock);
1032
1033 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001034}
1035
1036/**************************************************************************
1037 * qla1280_bus_reset
1038 * Reset the specified bus.
1039 **************************************************************************/
1040static int
1041qla1280_eh_bus_reset(struct scsi_cmnd *cmd)
1042{
Jeff Garzik 68b3aa72005-05-28 07:56:31 -04001043 int rc;
1044
1045 spin_lock_irq(cmd->device->host->host_lock);
1046 rc = qla1280_error_action(cmd, BUS_RESET);
1047 spin_unlock_irq(cmd->device->host->host_lock);
1048
1049 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001050}
1051
1052/**************************************************************************
1053 * qla1280_adapter_reset
1054 * Reset the specified adapter (both channels)
1055 **************************************************************************/
1056static int
1057qla1280_eh_adapter_reset(struct scsi_cmnd *cmd)
1058{
Jeff Garzik df0ae242005-05-28 07:57:14 -04001059 int rc;
1060
1061 spin_lock_irq(cmd->device->host->host_lock);
1062 rc = qla1280_error_action(cmd, ADAPTER_RESET);
1063 spin_unlock_irq(cmd->device->host->host_lock);
1064
1065 return rc;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001066}
1067
1068static int
1069qla1280_biosparam(struct scsi_device *sdev, struct block_device *bdev,
1070 sector_t capacity, int geom[])
1071{
1072 int heads, sectors, cylinders;
1073
1074 heads = 64;
1075 sectors = 32;
1076 cylinders = (unsigned long)capacity / (heads * sectors);
1077 if (cylinders > 1024) {
1078 heads = 255;
1079 sectors = 63;
1080 cylinders = (unsigned long)capacity / (heads * sectors);
1081 /* if (cylinders > 1023)
1082 cylinders = 1023; */
1083 }
1084
1085 geom[0] = heads;
1086 geom[1] = sectors;
1087 geom[2] = cylinders;
1088
1089 return 0;
1090}
1091
Christoph Hellwig 8af50dc2005-07-04 17:48:19 +02001092
1093/* disable risc and host interrupts */
1094static inline void
1095qla1280_disable_intrs(struct scsi_qla_host *ha)
1096{
1097 WRT_REG_WORD(&ha->iobase->ictrl, 0);
1098 RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */
1099}
1100
1101/* enable risc and host interrupts */
1102static inline void
1103qla1280_enable_intrs(struct scsi_qla_host *ha)
1104{
1105 WRT_REG_WORD(&ha->iobase->ictrl, (ISP_EN_INT | ISP_EN_RISC));
1106 RD_REG_WORD(&ha->iobase->ictrl); /* PCI Posted Write flush */
1107}
Linus Torvalds1da177e2005-04-16 15:20:36 -07001108
1109/**************************************************************************
1110 * qla1280_intr_handler
1111 * Handles the H/W interrupt
1112 **************************************************************************/
1113static irqreturn_t
David Howells7d12e782006-10-05 14:55:46 +01001114qla1280_intr_handler(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001115{
1116 struct scsi_qla_host *ha;
1117 struct device_reg __iomem *reg;
1118 u16 data;
1119 int handled = 0;
1120
1121 ENTER_INTR ("qla1280_intr_handler");
1122 ha = (struct scsi_qla_host *)dev_id;
1123
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05001124 spin_lock(ha->host->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001125
1126 ha->isr_count++;
1127 reg = ha->iobase;
1128
Christoph Hellwig 8af50dc2005-07-04 17:48:19 +02001129 qla1280_disable_intrs(ha);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001130
1131 data = qla1280_debounce_register(&reg->istatus);
1132 /* Check for pending interrupts. */
1133 if (data & RISC_INT) {
1134 qla1280_isr(ha, &ha->done_q);
1135 handled = 1;
1136 }
1137 if (!list_empty(&ha->done_q))
1138 qla1280_done(ha);
1139
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05001140 spin_unlock(ha->host->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001141
Christoph Hellwig 8af50dc2005-07-04 17:48:19 +02001142 qla1280_enable_intrs(ha);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001143
1144 LEAVE_INTR("qla1280_intr_handler");
1145 return IRQ_RETVAL(handled);
1146}
1147
1148
1149static int
1150qla1280_set_target_parameters(struct scsi_qla_host *ha, int bus, int target)
1151{
1152 uint8_t mr;
1153 uint16_t mb[MAILBOX_REGISTER_COUNT];
1154 struct nvram *nv;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001155 int status, lun;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001156
1157 nv = &ha->nvram;
1158
1159 mr = BIT_3 | BIT_2 | BIT_1 | BIT_0;
1160
1161 /* Set Target Parameters. */
1162 mb[0] = MBC_SET_TARGET_PARAMETERS;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001163 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
1164 mb[2] = nv->bus[bus].target[target].parameter.renegotiate_on_error << 8;
1165 mb[2] |= nv->bus[bus].target[target].parameter.stop_queue_on_check << 9;
1166 mb[2] |= nv->bus[bus].target[target].parameter.auto_request_sense << 10;
1167 mb[2] |= nv->bus[bus].target[target].parameter.tag_queuing << 11;
1168 mb[2] |= nv->bus[bus].target[target].parameter.enable_sync << 12;
1169 mb[2] |= nv->bus[bus].target[target].parameter.enable_wide << 13;
1170 mb[2] |= nv->bus[bus].target[target].parameter.parity_checking << 14;
1171 mb[2] |= nv->bus[bus].target[target].parameter.disconnect_allowed << 15;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001172
1173 if (IS_ISP1x160(ha)) {
1174 mb[2] |= nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr << 5;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001175 mb[3] = (nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001176 mb[6] = (nv->bus[bus].target[target].ppr_1x160.flags.ppr_options << 8) |
1177 nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width;
1178 mr |= BIT_6;
1179 } else {
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001180 mb[3] = (nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001181 }
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001182 mb[3] |= nv->bus[bus].target[target].sync_period;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001183
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001184 status = qla1280_mailbox_command(ha, mr, mb);
1185
1186 /* Set Device Queue Parameters. */
1187 for (lun = 0; lun < MAX_LUNS; lun++) {
1188 mb[0] = MBC_SET_DEVICE_QUEUE;
1189 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
1190 mb[1] |= lun;
1191 mb[2] = nv->bus[bus].max_queue_depth;
1192 mb[3] = nv->bus[bus].target[target].execution_throttle;
1193 status |= qla1280_mailbox_command(ha, 0x0f, mb);
1194 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001195
1196 if (status)
1197 printk(KERN_WARNING "scsi(%ld:%i:%i): "
1198 "qla1280_set_target_parameters() failed\n",
1199 ha->host_no, bus, target);
1200 return status;
1201}
1202
1203
1204/**************************************************************************
1205 * qla1280_slave_configure
1206 *
1207 * Description:
1208 * Determines the queue depth for a given device. There are two ways
1209 * a queue depth can be obtained for a tagged queueing device. One
1210 * way is the default queue depth which is determined by whether
1211 * If it is defined, then it is used
1212 * as the default queue depth. Otherwise, we use either 4 or 8 as the
1213 * default queue depth (dependent on the number of hardware SCBs).
1214 **************************************************************************/
1215static int
1216qla1280_slave_configure(struct scsi_device *device)
1217{
1218 struct scsi_qla_host *ha;
1219 int default_depth = 3;
1220 int bus = device->channel;
1221 int target = device->id;
1222 int status = 0;
1223 struct nvram *nv;
1224 unsigned long flags;
1225
1226 ha = (struct scsi_qla_host *)device->host->hostdata;
1227 nv = &ha->nvram;
1228
1229 if (qla1280_check_for_dead_scsi_bus(ha, bus))
1230 return 1;
1231
1232 if (device->tagged_supported &&
1233 (ha->bus_settings[bus].qtag_enables & (BIT_0 << target))) {
1234 scsi_adjust_queue_depth(device, MSG_ORDERED_TAG,
1235 ha->bus_settings[bus].hiwat);
1236 } else {
1237 scsi_adjust_queue_depth(device, 0, default_depth);
1238 }
1239
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001240 nv->bus[bus].target[target].parameter.enable_sync = device->sdtr;
1241 nv->bus[bus].target[target].parameter.enable_wide = device->wdtr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001242 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = device->ppr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001243
1244 if (driver_setup.no_sync ||
1245 (driver_setup.sync_mask &&
1246 (~driver_setup.sync_mask & (1 << target))))
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001247 nv->bus[bus].target[target].parameter.enable_sync = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001248 if (driver_setup.no_wide ||
1249 (driver_setup.wide_mask &&
1250 (~driver_setup.wide_mask & (1 << target))))
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001251 nv->bus[bus].target[target].parameter.enable_wide = 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001252 if (IS_ISP1x160(ha)) {
1253 if (driver_setup.no_ppr ||
1254 (driver_setup.ppr_mask &&
1255 (~driver_setup.ppr_mask & (1 << target))))
1256 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 0;
1257 }
1258
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05001259 spin_lock_irqsave(ha->host->host_lock, flags);
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001260 if (nv->bus[bus].target[target].parameter.enable_sync)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001261 status = qla1280_set_target_parameters(ha, bus, target);
1262 qla1280_get_target_parameters(ha, device);
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05001263 spin_unlock_irqrestore(ha->host->host_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001264 return status;
1265}
1266
Linus Torvalds1da177e2005-04-16 15:20:36 -07001267
1268/*
1269 * qla1280_done
1270 * Process completed commands.
1271 *
1272 * Input:
1273 * ha = adapter block pointer.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001274 */
1275static void
1276qla1280_done(struct scsi_qla_host *ha)
1277{
1278 struct srb *sp;
1279 struct list_head *done_q;
1280 int bus, target, lun;
1281 struct scsi_cmnd *cmd;
1282
1283 ENTER("qla1280_done");
1284
1285 done_q = &ha->done_q;
1286
1287 while (!list_empty(done_q)) {
1288 sp = list_entry(done_q->next, struct srb, list);
1289
1290 list_del(&sp->list);
1291
1292 cmd = sp->cmd;
1293 bus = SCSI_BUS_32(cmd);
1294 target = SCSI_TCN_32(cmd);
1295 lun = SCSI_LUN_32(cmd);
1296
1297 switch ((CMD_RESULT(cmd) >> 16)) {
1298 case DID_RESET:
1299 /* Issue marker command. */
1300 qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
1301 break;
1302 case DID_ABORT:
1303 sp->flags &= ~SRB_ABORT_PENDING;
1304 sp->flags |= SRB_ABORTED;
1305 if (sp->flags & SRB_TIMEOUT)
1306 CMD_RESULT(sp->cmd) = DID_TIME_OUT << 16;
1307 break;
1308 default:
1309 break;
1310 }
1311
1312 /* Release memory used for this I/O */
Jes Sorensen5c1da582007-11-09 14:40:41 +01001313 scsi_dma_unmap(cmd);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001314
1315 /* Call the mid-level driver interrupt handler */
1316 CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
1317 ha->actthreads--;
1318
Linus Torvalds1da177e2005-04-16 15:20:36 -07001319 (*(cmd)->scsi_done)(cmd);
1320
1321 if(sp->wait != NULL)
1322 complete(sp->wait);
1323 }
1324 LEAVE("qla1280_done");
1325}
1326
1327/*
1328 * Translates a ISP error to a Linux SCSI error
1329 */
1330static int
1331qla1280_return_status(struct response * sts, struct scsi_cmnd *cp)
1332{
1333 int host_status = DID_ERROR;
1334 uint16_t comp_status = le16_to_cpu(sts->comp_status);
1335 uint16_t state_flags = le16_to_cpu(sts->state_flags);
Jes Sorensen3ef49a32007-01-05 12:05:37 -05001336 uint32_t residual_length = le32_to_cpu(sts->residual_length);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001337 uint16_t scsi_status = le16_to_cpu(sts->scsi_status);
1338#if DEBUG_QLA1280_INTR
1339 static char *reason[] = {
1340 "DID_OK",
1341 "DID_NO_CONNECT",
1342 "DID_BUS_BUSY",
1343 "DID_TIME_OUT",
1344 "DID_BAD_TARGET",
1345 "DID_ABORT",
1346 "DID_PARITY",
1347 "DID_ERROR",
1348 "DID_RESET",
1349 "DID_BAD_INTR"
1350 };
1351#endif /* DEBUG_QLA1280_INTR */
1352
1353 ENTER("qla1280_return_status");
1354
1355#if DEBUG_QLA1280_INTR
1356 /*
1357 dprintk(1, "qla1280_return_status: compl status = 0x%04x\n",
1358 comp_status);
1359 */
1360#endif
1361
1362 switch (comp_status) {
1363 case CS_COMPLETE:
1364 host_status = DID_OK;
1365 break;
1366
1367 case CS_INCOMPLETE:
1368 if (!(state_flags & SF_GOT_BUS))
1369 host_status = DID_NO_CONNECT;
1370 else if (!(state_flags & SF_GOT_TARGET))
1371 host_status = DID_BAD_TARGET;
1372 else if (!(state_flags & SF_SENT_CDB))
1373 host_status = DID_ERROR;
1374 else if (!(state_flags & SF_TRANSFERRED_DATA))
1375 host_status = DID_ERROR;
1376 else if (!(state_flags & SF_GOT_STATUS))
1377 host_status = DID_ERROR;
1378 else if (!(state_flags & SF_GOT_SENSE))
1379 host_status = DID_ERROR;
1380 break;
1381
1382 case CS_RESET:
1383 host_status = DID_RESET;
1384 break;
1385
1386 case CS_ABORTED:
1387 host_status = DID_ABORT;
1388 break;
1389
1390 case CS_TIMEOUT:
1391 host_status = DID_TIME_OUT;
1392 break;
1393
1394 case CS_DATA_OVERRUN:
1395 dprintk(2, "Data overrun 0x%x\n", residual_length);
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02001396 dprintk(2, "qla1280_return_status: response packet data\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -07001397 qla1280_dump_buffer(2, (char *)sts, RESPONSE_ENTRY_SIZE);
1398 host_status = DID_ERROR;
1399 break;
1400
1401 case CS_DATA_UNDERRUN:
Jes Sorensen5c1da582007-11-09 14:40:41 +01001402 if ((scsi_bufflen(cp) - residual_length) <
Linus Torvalds1da177e2005-04-16 15:20:36 -07001403 cp->underflow) {
1404 printk(KERN_WARNING
1405 "scsi: Underflow detected - retrying "
1406 "command.\n");
1407 host_status = DID_ERROR;
Jes Sorensen3ef49a32007-01-05 12:05:37 -05001408 } else {
Jes Sorensen5c1da582007-11-09 14:40:41 +01001409 scsi_set_resid(cp, residual_length);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001410 host_status = DID_OK;
Jes Sorensen3ef49a32007-01-05 12:05:37 -05001411 }
Linus Torvalds1da177e2005-04-16 15:20:36 -07001412 break;
1413
1414 default:
1415 host_status = DID_ERROR;
1416 break;
1417 }
1418
1419#if DEBUG_QLA1280_INTR
1420 dprintk(1, "qla1280 ISP status: host status (%s) scsi status %x\n",
1421 reason[host_status], scsi_status);
1422#endif
1423
1424 LEAVE("qla1280_return_status");
1425
1426 return (scsi_status & 0xff) | (host_status << 16);
1427}
1428
1429/****************************************************************************/
1430/* QLogic ISP1280 Hardware Support Functions. */
1431/****************************************************************************/
1432
Linus Torvalds1da177e2005-04-16 15:20:36 -07001433/*
1434 * qla1280_initialize_adapter
1435 * Initialize board.
1436 *
1437 * Input:
1438 * ha = adapter block pointer.
1439 *
1440 * Returns:
1441 * 0 = success
1442 */
1443static int __devinit
1444qla1280_initialize_adapter(struct scsi_qla_host *ha)
1445{
1446 struct device_reg __iomem *reg;
1447 int status;
1448 int bus;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001449 unsigned long flags;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001450
1451 ENTER("qla1280_initialize_adapter");
1452
1453 /* Clear adapter flags. */
1454 ha->flags.online = 0;
1455 ha->flags.disable_host_adapter = 0;
1456 ha->flags.reset_active = 0;
1457 ha->flags.abort_isp_active = 0;
1458
Linus Torvalds1da177e2005-04-16 15:20:36 -07001459#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
1460 if (ia64_platform_is("sn2")) {
1461 printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
1462 "dual channel lockup workaround\n", ha->host_no);
1463 ha->flags.use_pci_vchannel = 1;
1464 driver_setup.no_nvram = 1;
1465 }
1466#endif
1467
1468 /* TODO: implement support for the 1040 nvram format */
1469 if (IS_ISP1040(ha))
1470 driver_setup.no_nvram = 1;
1471
1472 dprintk(1, "Configure PCI space for adapter...\n");
1473
1474 reg = ha->iobase;
1475
1476 /* Insure mailbox registers are free. */
1477 WRT_REG_WORD(&reg->semaphore, 0);
1478 WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
1479 WRT_REG_WORD(&reg->host_cmd, HC_CLR_HOST_INT);
1480 RD_REG_WORD(&reg->host_cmd);
1481
1482 if (qla1280_read_nvram(ha)) {
1483 dprintk(2, "qla1280_initialize_adapter: failed to read "
1484 "NVRAM\n");
1485 }
1486
Linus Torvalds1da177e2005-04-16 15:20:36 -07001487 /*
1488 * It's necessary to grab the spin here as qla1280_mailbox_command
1489 * needs to be able to drop the lock unconditionally to wait
1490 * for completion.
Linus Torvalds1da177e2005-04-16 15:20:36 -07001491 */
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05001492 spin_lock_irqsave(ha->host->host_lock, flags);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001493
1494 status = qla1280_load_firmware(ha);
1495 if (status) {
1496 printk(KERN_ERR "scsi(%li): initialize: pci probe failed!\n",
1497 ha->host_no);
1498 goto out;
1499 }
1500
1501 /* Setup adapter based on NVRAM parameters. */
1502 dprintk(1, "scsi(%ld): Configure NVRAM parameters\n", ha->host_no);
1503 qla1280_nvram_config(ha);
1504
1505 if (ha->flags.disable_host_adapter) {
1506 status = 1;
1507 goto out;
1508 }
1509
1510 status = qla1280_init_rings(ha);
1511 if (status)
1512 goto out;
1513
1514 /* Issue SCSI reset, if we can't reset twice then bus is dead */
1515 for (bus = 0; bus < ha->ports; bus++) {
1516 if (!ha->bus_settings[bus].disable_scsi_reset &&
1517 qla1280_bus_reset(ha, bus) &&
1518 qla1280_bus_reset(ha, bus))
1519 ha->bus_settings[bus].scsi_bus_dead = 1;
1520 }
1521
1522 ha->flags.online = 1;
1523 out:
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05001524 spin_unlock_irqrestore(ha->host->host_lock, flags);
1525
Linus Torvalds1da177e2005-04-16 15:20:36 -07001526 if (status)
1527 dprintk(2, "qla1280_initialize_adapter: **** FAILED ****\n");
1528
1529 LEAVE("qla1280_initialize_adapter");
1530 return status;
1531}
1532
Linus Torvalds1da177e2005-04-16 15:20:36 -07001533/*
1534 * Chip diagnostics
1535 * Test chip for proper operation.
1536 *
1537 * Input:
1538 * ha = adapter block pointer.
1539 *
1540 * Returns:
1541 * 0 = success.
1542 */
1543static int
1544qla1280_chip_diag(struct scsi_qla_host *ha)
1545{
1546 uint16_t mb[MAILBOX_REGISTER_COUNT];
1547 struct device_reg __iomem *reg = ha->iobase;
1548 int status = 0;
1549 int cnt;
1550 uint16_t data;
1551 dprintk(3, "qla1280_chip_diag: testing device at 0x%p \n", &reg->id_l);
1552
1553 dprintk(1, "scsi(%ld): Verifying chip\n", ha->host_no);
1554
1555 /* Soft reset chip and wait for it to finish. */
1556 WRT_REG_WORD(&reg->ictrl, ISP_RESET);
1557
1558 /*
1559 * We can't do a traditional PCI write flush here by reading
1560 * back the register. The card will not respond once the reset
1561 * is in action and we end up with a machine check exception
1562 * instead. Nothing to do but wait and hope for the best.
1563 * A portable pci_write_flush(pdev) call would be very useful here.
1564 */
1565 udelay(20);
1566 data = qla1280_debounce_register(&reg->ictrl);
1567 /*
1568 * Yet another QLogic gem ;-(
1569 */
1570 for (cnt = 1000000; cnt && data & ISP_RESET; cnt--) {
1571 udelay(5);
1572 data = RD_REG_WORD(&reg->ictrl);
1573 }
1574
1575 if (!cnt)
1576 goto fail;
1577
1578 /* Reset register cleared by chip reset. */
1579 dprintk(3, "qla1280_chip_diag: reset register cleared by chip reset\n");
1580
1581 WRT_REG_WORD(&reg->cfg_1, 0);
1582
1583 /* Reset RISC and disable BIOS which
1584 allows RISC to execute out of RAM. */
1585 WRT_REG_WORD(&reg->host_cmd, HC_RESET_RISC |
1586 HC_RELEASE_RISC | HC_DISABLE_BIOS);
1587
1588 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
1589 data = qla1280_debounce_register(&reg->mailbox0);
1590
1591 /*
1592 * I *LOVE* this code!
1593 */
1594 for (cnt = 1000000; cnt && data == MBS_BUSY; cnt--) {
1595 udelay(5);
1596 data = RD_REG_WORD(&reg->mailbox0);
1597 }
1598
1599 if (!cnt)
1600 goto fail;
1601
1602 /* Check product ID of chip */
1603 dprintk(3, "qla1280_chip_diag: Checking product ID of chip\n");
1604
1605 if (RD_REG_WORD(&reg->mailbox1) != PROD_ID_1 ||
1606 (RD_REG_WORD(&reg->mailbox2) != PROD_ID_2 &&
1607 RD_REG_WORD(&reg->mailbox2) != PROD_ID_2a) ||
1608 RD_REG_WORD(&reg->mailbox3) != PROD_ID_3 ||
1609 RD_REG_WORD(&reg->mailbox4) != PROD_ID_4) {
1610 printk(KERN_INFO "qla1280: Wrong product ID = "
1611 "0x%x,0x%x,0x%x,0x%x\n",
1612 RD_REG_WORD(&reg->mailbox1),
1613 RD_REG_WORD(&reg->mailbox2),
1614 RD_REG_WORD(&reg->mailbox3),
1615 RD_REG_WORD(&reg->mailbox4));
1616 goto fail;
1617 }
1618
1619 /*
1620 * Enable ints early!!!
1621 */
1622 qla1280_enable_intrs(ha);
1623
1624 dprintk(1, "qla1280_chip_diag: Checking mailboxes of chip\n");
1625 /* Wrap Incoming Mailboxes Test. */
1626 mb[0] = MBC_MAILBOX_REGISTER_TEST;
1627 mb[1] = 0xAAAA;
1628 mb[2] = 0x5555;
1629 mb[3] = 0xAA55;
1630 mb[4] = 0x55AA;
1631 mb[5] = 0xA5A5;
1632 mb[6] = 0x5A5A;
1633 mb[7] = 0x2525;
1634
1635 status = qla1280_mailbox_command(ha, 0xff, mb);
1636 if (status)
1637 goto fail;
1638
1639 if (mb[1] != 0xAAAA || mb[2] != 0x5555 || mb[3] != 0xAA55 ||
1640 mb[4] != 0x55AA || mb[5] != 0xA5A5 || mb[6] != 0x5A5A ||
1641 mb[7] != 0x2525) {
1642 printk(KERN_INFO "qla1280: Failed mbox check\n");
1643 goto fail;
1644 }
1645
1646 dprintk(3, "qla1280_chip_diag: exiting normally\n");
1647 return 0;
1648 fail:
1649 dprintk(2, "qla1280_chip_diag: **** FAILED ****\n");
1650 return status;
1651}
1652
1653static int
1654qla1280_load_firmware_pio(struct scsi_qla_host *ha)
1655{
1656 uint16_t risc_address, *risc_code_address, risc_code_size;
1657 uint16_t mb[MAILBOX_REGISTER_COUNT], i;
1658 int err;
1659
1660 /* Load RISC code. */
1661 risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
1662 risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
1663 risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
1664
1665 for (i = 0; i < risc_code_size; i++) {
1666 mb[0] = MBC_WRITE_RAM_WORD;
1667 mb[1] = risc_address + i;
1668 mb[2] = risc_code_address[i];
1669
1670 err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);
1671 if (err) {
1672 printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
1673 ha->host_no);
1674 return err;
1675 }
1676 }
1677
1678 return 0;
1679}
1680
1681#define DUMP_IT_BACK 0 /* for debug of RISC loading */
1682static int
1683qla1280_load_firmware_dma(struct scsi_qla_host *ha)
1684{
1685 uint16_t risc_address, *risc_code_address, risc_code_size;
1686 uint16_t mb[MAILBOX_REGISTER_COUNT], cnt;
1687 int err = 0, num, i;
1688#if DUMP_IT_BACK
1689 uint8_t *sp, *tbuf;
1690 dma_addr_t p_tbuf;
1691
1692 tbuf = pci_alloc_consistent(ha->pdev, 8000, &p_tbuf);
1693 if (!tbuf)
1694 return -ENOMEM;
1695#endif
1696
1697 /* Load RISC code. */
1698 risc_address = *ql1280_board_tbl[ha->devnum].fwstart;
1699 risc_code_address = ql1280_board_tbl[ha->devnum].fwcode;
1700 risc_code_size = *ql1280_board_tbl[ha->devnum].fwlen;
1701
1702 dprintk(1, "%s: DMA RISC code (%i) words\n",
1703 __FUNCTION__, risc_code_size);
1704
1705 num = 0;
1706 while (risc_code_size > 0) {
1707 int warn __attribute__((unused)) = 0;
1708
1709 cnt = 2000 >> 1;
1710
1711 if (cnt > risc_code_size)
1712 cnt = risc_code_size;
1713
1714 dprintk(2, "qla1280_setup_chip: loading risc @ =(0x%p),"
1715 "%d,%d(0x%x)\n",
1716 risc_code_address, cnt, num, risc_address);
1717 for(i = 0; i < cnt; i++)
Christoph Hellwig 8d6810d2005-07-04 17:49:26 +02001718 ((__le16 *)ha->request_ring)[i] =
Linus Torvalds1da177e2005-04-16 15:20:36 -07001719 cpu_to_le16(risc_code_address[i]);
1720
1721 mb[0] = MBC_LOAD_RAM;
1722 mb[1] = risc_address;
1723 mb[4] = cnt;
1724 mb[3] = ha->request_dma & 0xffff;
1725 mb[2] = (ha->request_dma >> 16) & 0xffff;
1726 mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff;
1727 mb[6] = pci_dma_hi32(ha->request_dma) >> 16;
1728 dprintk(2, "%s: op=%d 0x%p = 0x%4x,0x%4x,0x%4x,0x%4x\n",
1729 __FUNCTION__, mb[0],
1730 (void *)(long)ha->request_dma,
1731 mb[6], mb[7], mb[2], mb[3]);
1732 err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
1733 BIT_1 | BIT_0, mb);
1734 if (err) {
1735 printk(KERN_ERR "scsi(%li): Failed to load partial "
1736 "segment of f\n", ha->host_no);
1737 goto out;
1738 }
1739
1740#if DUMP_IT_BACK
1741 mb[0] = MBC_DUMP_RAM;
1742 mb[1] = risc_address;
1743 mb[4] = cnt;
1744 mb[3] = p_tbuf & 0xffff;
1745 mb[2] = (p_tbuf >> 16) & 0xffff;
1746 mb[7] = pci_dma_hi32(p_tbuf) & 0xffff;
1747 mb[6] = pci_dma_hi32(p_tbuf) >> 16;
1748
1749 err = qla1280_mailbox_command(ha, BIT_4 | BIT_3 | BIT_2 |
1750 BIT_1 | BIT_0, mb);
1751 if (err) {
1752 printk(KERN_ERR
1753 "Failed to dump partial segment of f/w\n");
1754 goto out;
1755 }
1756 sp = (uint8_t *)ha->request_ring;
1757 for (i = 0; i < (cnt << 1); i++) {
1758 if (tbuf[i] != sp[i] && warn++ < 10) {
1759 printk(KERN_ERR "%s: FW compare error @ "
1760 "byte(0x%x) loop#=%x\n",
1761 __FUNCTION__, i, num);
1762 printk(KERN_ERR "%s: FWbyte=%x "
1763 "FWfromChip=%x\n",
1764 __FUNCTION__, sp[i], tbuf[i]);
1765 /*break; */
1766 }
1767 }
1768#endif
1769 risc_address += cnt;
1770 risc_code_size = risc_code_size - cnt;
1771 risc_code_address = risc_code_address + cnt;
1772 num++;
1773 }
1774
1775 out:
1776#if DUMP_IT_BACK
1777 pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
1778#endif
1779 return err;
1780}
1781
1782static int
1783qla1280_start_firmware(struct scsi_qla_host *ha)
1784{
1785 uint16_t mb[MAILBOX_REGISTER_COUNT];
1786 int err;
1787
1788 dprintk(1, "%s: Verifying checksum of loaded RISC code.\n",
1789 __FUNCTION__);
1790
1791 /* Verify checksum of loaded RISC code. */
1792 mb[0] = MBC_VERIFY_CHECKSUM;
1793 /* mb[1] = ql12_risc_code_addr01; */
1794 mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
1795 err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
1796 if (err) {
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02001797 printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001798 return err;
1799 }
1800
1801 /* Start firmware execution. */
1802 dprintk(1, "%s: start firmware running.\n", __FUNCTION__);
1803 mb[0] = MBC_EXECUTE_FIRMWARE;
1804 mb[1] = *ql1280_board_tbl[ha->devnum].fwstart;
1805 err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
1806 if (err) {
1807 printk(KERN_ERR "scsi(%li): Failed to start firmware\n",
1808 ha->host_no);
1809 }
1810
1811 return err;
1812}
1813
1814static int
1815qla1280_load_firmware(struct scsi_qla_host *ha)
1816{
Christoph Hellwig 5c79d612005-07-04 17:48:46 +02001817 int err;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001818
1819 err = qla1280_chip_diag(ha);
1820 if (err)
1821 goto out;
1822 if (IS_ISP1040(ha))
1823 err = qla1280_load_firmware_pio(ha);
1824 else
1825 err = qla1280_load_firmware_dma(ha);
1826 if (err)
1827 goto out;
1828 err = qla1280_start_firmware(ha);
1829 out:
1830 return err;
1831}
1832
1833/*
1834 * Initialize rings
1835 *
1836 * Input:
1837 * ha = adapter block pointer.
1838 * ha->request_ring = request ring virtual address
1839 * ha->response_ring = response ring virtual address
1840 * ha->request_dma = request ring physical address
1841 * ha->response_dma = response ring physical address
1842 *
1843 * Returns:
1844 * 0 = success.
1845 */
1846static int
1847qla1280_init_rings(struct scsi_qla_host *ha)
1848{
1849 uint16_t mb[MAILBOX_REGISTER_COUNT];
1850 int status = 0;
1851
1852 ENTER("qla1280_init_rings");
1853
1854 /* Clear outstanding commands array. */
1855 memset(ha->outstanding_cmds, 0,
1856 sizeof(struct srb *) * MAX_OUTSTANDING_COMMANDS);
1857
1858 /* Initialize request queue. */
1859 ha->request_ring_ptr = ha->request_ring;
1860 ha->req_ring_index = 0;
1861 ha->req_q_cnt = REQUEST_ENTRY_CNT;
1862 /* mb[0] = MBC_INIT_REQUEST_QUEUE; */
1863 mb[0] = MBC_INIT_REQUEST_QUEUE_A64;
1864 mb[1] = REQUEST_ENTRY_CNT;
1865 mb[3] = ha->request_dma & 0xffff;
1866 mb[2] = (ha->request_dma >> 16) & 0xffff;
1867 mb[4] = 0;
1868 mb[7] = pci_dma_hi32(ha->request_dma) & 0xffff;
1869 mb[6] = pci_dma_hi32(ha->request_dma) >> 16;
1870 if (!(status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_4 |
1871 BIT_3 | BIT_2 | BIT_1 | BIT_0,
1872 &mb[0]))) {
1873 /* Initialize response queue. */
1874 ha->response_ring_ptr = ha->response_ring;
1875 ha->rsp_ring_index = 0;
1876 /* mb[0] = MBC_INIT_RESPONSE_QUEUE; */
1877 mb[0] = MBC_INIT_RESPONSE_QUEUE_A64;
1878 mb[1] = RESPONSE_ENTRY_CNT;
1879 mb[3] = ha->response_dma & 0xffff;
1880 mb[2] = (ha->response_dma >> 16) & 0xffff;
1881 mb[5] = 0;
1882 mb[7] = pci_dma_hi32(ha->response_dma) & 0xffff;
1883 mb[6] = pci_dma_hi32(ha->response_dma) >> 16;
1884 status = qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_5 |
1885 BIT_3 | BIT_2 | BIT_1 | BIT_0,
1886 &mb[0]);
1887 }
1888
1889 if (status)
1890 dprintk(2, "qla1280_init_rings: **** FAILED ****\n");
1891
1892 LEAVE("qla1280_init_rings");
1893 return status;
1894}
1895
1896static void
1897qla1280_print_settings(struct nvram *nv)
1898{
1899 dprintk(1, "qla1280 : initiator scsi id bus[0]=%d\n",
1900 nv->bus[0].config_1.initiator_id);
1901 dprintk(1, "qla1280 : initiator scsi id bus[1]=%d\n",
1902 nv->bus[1].config_1.initiator_id);
1903
1904 dprintk(1, "qla1280 : bus reset delay[0]=%d\n",
1905 nv->bus[0].bus_reset_delay);
1906 dprintk(1, "qla1280 : bus reset delay[1]=%d\n",
1907 nv->bus[1].bus_reset_delay);
1908
1909 dprintk(1, "qla1280 : retry count[0]=%d\n", nv->bus[0].retry_count);
1910 dprintk(1, "qla1280 : retry delay[0]=%d\n", nv->bus[0].retry_delay);
1911 dprintk(1, "qla1280 : retry count[1]=%d\n", nv->bus[1].retry_count);
1912 dprintk(1, "qla1280 : retry delay[1]=%d\n", nv->bus[1].retry_delay);
1913
1914 dprintk(1, "qla1280 : async data setup time[0]=%d\n",
1915 nv->bus[0].config_2.async_data_setup_time);
1916 dprintk(1, "qla1280 : async data setup time[1]=%d\n",
1917 nv->bus[1].config_2.async_data_setup_time);
1918
1919 dprintk(1, "qla1280 : req/ack active negation[0]=%d\n",
1920 nv->bus[0].config_2.req_ack_active_negation);
1921 dprintk(1, "qla1280 : req/ack active negation[1]=%d\n",
1922 nv->bus[1].config_2.req_ack_active_negation);
1923
1924 dprintk(1, "qla1280 : data line active negation[0]=%d\n",
1925 nv->bus[0].config_2.data_line_active_negation);
1926 dprintk(1, "qla1280 : data line active negation[1]=%d\n",
1927 nv->bus[1].config_2.data_line_active_negation);
1928
1929 dprintk(1, "qla1280 : disable loading risc code=%d\n",
1930 nv->cntr_flags_1.disable_loading_risc_code);
1931
1932 dprintk(1, "qla1280 : enable 64bit addressing=%d\n",
1933 nv->cntr_flags_1.enable_64bit_addressing);
1934
1935 dprintk(1, "qla1280 : selection timeout limit[0]=%d\n",
1936 nv->bus[0].selection_timeout);
1937 dprintk(1, "qla1280 : selection timeout limit[1]=%d\n",
1938 nv->bus[1].selection_timeout);
1939
1940 dprintk(1, "qla1280 : max queue depth[0]=%d\n",
1941 nv->bus[0].max_queue_depth);
1942 dprintk(1, "qla1280 : max queue depth[1]=%d\n",
1943 nv->bus[1].max_queue_depth);
1944}
1945
1946static void
1947qla1280_set_target_defaults(struct scsi_qla_host *ha, int bus, int target)
1948{
1949 struct nvram *nv = &ha->nvram;
1950
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001951 nv->bus[bus].target[target].parameter.renegotiate_on_error = 1;
1952 nv->bus[bus].target[target].parameter.auto_request_sense = 1;
1953 nv->bus[bus].target[target].parameter.tag_queuing = 1;
1954 nv->bus[bus].target[target].parameter.enable_sync = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001955#if 1 /* Some SCSI Processors do not seem to like this */
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001956 nv->bus[bus].target[target].parameter.enable_wide = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001957#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -07001958 nv->bus[bus].target[target].execution_throttle =
1959 nv->bus[bus].max_queue_depth - 1;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02001960 nv->bus[bus].target[target].parameter.parity_checking = 1;
1961 nv->bus[bus].target[target].parameter.disconnect_allowed = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001962
1963 if (IS_ISP1x160(ha)) {
1964 nv->bus[bus].target[target].flags.flags1x160.device_enable = 1;
1965 nv->bus[bus].target[target].flags.flags1x160.sync_offset = 0x0e;
1966 nv->bus[bus].target[target].sync_period = 9;
1967 nv->bus[bus].target[target].ppr_1x160.flags.enable_ppr = 1;
1968 nv->bus[bus].target[target].ppr_1x160.flags.ppr_options = 2;
1969 nv->bus[bus].target[target].ppr_1x160.flags.ppr_bus_width = 1;
1970 } else {
1971 nv->bus[bus].target[target].flags.flags1x80.device_enable = 1;
1972 nv->bus[bus].target[target].flags.flags1x80.sync_offset = 12;
1973 nv->bus[bus].target[target].sync_period = 10;
1974 }
1975}
1976
1977static void
1978qla1280_set_defaults(struct scsi_qla_host *ha)
1979{
1980 struct nvram *nv = &ha->nvram;
1981 int bus, target;
1982
1983 dprintk(1, "Using defaults for NVRAM: \n");
1984 memset(nv, 0, sizeof(struct nvram));
1985
1986 /* nv->cntr_flags_1.disable_loading_risc_code = 1; */
1987 nv->firmware_feature.f.enable_fast_posting = 1;
1988 nv->firmware_feature.f.disable_synchronous_backoff = 1;
Christoph Hellwig 0888f4c2005-07-04 17:48:55 +02001989 nv->termination.scsi_bus_0_control = 3;
1990 nv->termination.scsi_bus_1_control = 3;
1991 nv->termination.auto_term_support = 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001992
1993 /*
1994 * Set default FIFO magic - What appropriate values would be here
1995 * is unknown. This is what I have found testing with 12160s.
1996 *
1997 * Now, I would love the magic decoder ring for this one, the
1998 * header file provided by QLogic seems to be bogus or incomplete
1999 * at best.
2000 */
Christoph Hellwig 0888f4c2005-07-04 17:48:55 +02002001 nv->isp_config.burst_enable = 1;
2002 if (IS_ISP1040(ha))
2003 nv->isp_config.fifo_threshold |= 3;
2004 else
2005 nv->isp_config.fifo_threshold |= 4;
2006
Linus Torvalds1da177e2005-04-16 15:20:36 -07002007 if (IS_ISP1x160(ha))
2008 nv->isp_parameter = 0x01; /* fast memory enable */
2009
2010 for (bus = 0; bus < MAX_BUSES; bus++) {
2011 nv->bus[bus].config_1.initiator_id = 7;
2012 nv->bus[bus].config_2.req_ack_active_negation = 1;
2013 nv->bus[bus].config_2.data_line_active_negation = 1;
2014 nv->bus[bus].selection_timeout = 250;
2015 nv->bus[bus].max_queue_depth = 256;
2016
2017 if (IS_ISP1040(ha)) {
2018 nv->bus[bus].bus_reset_delay = 3;
2019 nv->bus[bus].config_2.async_data_setup_time = 6;
2020 nv->bus[bus].retry_delay = 1;
2021 } else {
2022 nv->bus[bus].bus_reset_delay = 5;
2023 nv->bus[bus].config_2.async_data_setup_time = 8;
2024 }
2025
2026 for (target = 0; target < MAX_TARGETS; target++)
2027 qla1280_set_target_defaults(ha, bus, target);
2028 }
2029}
2030
2031static int
2032qla1280_config_target(struct scsi_qla_host *ha, int bus, int target)
2033{
2034 struct nvram *nv = &ha->nvram;
2035 uint16_t mb[MAILBOX_REGISTER_COUNT];
2036 int status, lun;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002037 uint16_t flag;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002038
2039 /* Set Target Parameters. */
2040 mb[0] = MBC_SET_TARGET_PARAMETERS;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002041 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002042
2043 /*
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002044 * Do not enable sync and ppr for the initial INQUIRY run. We
2045 * enable this later if we determine the target actually
2046 * supports it.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002047 */
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002048 mb[2] = (TP_RENEGOTIATE | TP_AUTO_REQUEST_SENSE | TP_TAGGED_QUEUE
2049 | TP_WIDE | TP_PARITY | TP_DISCONNECT);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002050
2051 if (IS_ISP1x160(ha))
2052 mb[3] = nv->bus[bus].target[target].flags.flags1x160.sync_offset << 8;
2053 else
2054 mb[3] = nv->bus[bus].target[target].flags.flags1x80.sync_offset << 8;
2055 mb[3] |= nv->bus[bus].target[target].sync_period;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002056 status = qla1280_mailbox_command(ha, 0x0f, mb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002057
2058 /* Save Tag queuing enable flag. */
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002059 flag = (BIT_0 << target) & mb[0];
2060 if (nv->bus[bus].target[target].parameter.tag_queuing)
2061 ha->bus_settings[bus].qtag_enables |= flag;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002062
2063 /* Save Device enable flag. */
2064 if (IS_ISP1x160(ha)) {
2065 if (nv->bus[bus].target[target].flags.flags1x160.device_enable)
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002066 ha->bus_settings[bus].device_enables |= flag;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002067 ha->bus_settings[bus].lun_disables |= 0;
2068 } else {
2069 if (nv->bus[bus].target[target].flags.flags1x80.device_enable)
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002070 ha->bus_settings[bus].device_enables |= flag;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002071 /* Save LUN disable flag. */
2072 if (nv->bus[bus].target[target].flags.flags1x80.lun_disable)
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002073 ha->bus_settings[bus].lun_disables |= flag;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002074 }
2075
2076 /* Set Device Queue Parameters. */
2077 for (lun = 0; lun < MAX_LUNS; lun++) {
2078 mb[0] = MBC_SET_DEVICE_QUEUE;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002079 mb[1] = (uint16_t)((bus ? target | BIT_7 : target) << 8);
2080 mb[1] |= lun;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002081 mb[2] = nv->bus[bus].max_queue_depth;
2082 mb[3] = nv->bus[bus].target[target].execution_throttle;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002083 status |= qla1280_mailbox_command(ha, 0x0f, mb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002084 }
2085
2086 return status;
2087}
2088
2089static int
2090qla1280_config_bus(struct scsi_qla_host *ha, int bus)
2091{
2092 struct nvram *nv = &ha->nvram;
2093 uint16_t mb[MAILBOX_REGISTER_COUNT];
2094 int target, status;
2095
2096 /* SCSI Reset Disable. */
2097 ha->bus_settings[bus].disable_scsi_reset =
2098 nv->bus[bus].config_1.scsi_reset_disable;
2099
2100 /* Initiator ID. */
2101 ha->bus_settings[bus].id = nv->bus[bus].config_1.initiator_id;
2102 mb[0] = MBC_SET_INITIATOR_ID;
2103 mb[1] = bus ? ha->bus_settings[bus].id | BIT_7 :
2104 ha->bus_settings[bus].id;
2105 status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2106
2107 /* Reset Delay. */
2108 ha->bus_settings[bus].bus_reset_delay =
2109 nv->bus[bus].bus_reset_delay;
2110
2111 /* Command queue depth per device. */
2112 ha->bus_settings[bus].hiwat = nv->bus[bus].max_queue_depth - 1;
2113
2114 /* Set target parameters. */
2115 for (target = 0; target < MAX_TARGETS; target++)
2116 status |= qla1280_config_target(ha, bus, target);
2117
2118 return status;
2119}
2120
2121static int
2122qla1280_nvram_config(struct scsi_qla_host *ha)
2123{
2124 struct device_reg __iomem *reg = ha->iobase;
2125 struct nvram *nv = &ha->nvram;
2126 int bus, target, status = 0;
2127 uint16_t mb[MAILBOX_REGISTER_COUNT];
Linus Torvalds1da177e2005-04-16 15:20:36 -07002128
2129 ENTER("qla1280_nvram_config");
2130
2131 if (ha->nvram_valid) {
2132 /* Always force AUTO sense for LINUX SCSI */
2133 for (bus = 0; bus < MAX_BUSES; bus++)
2134 for (target = 0; target < MAX_TARGETS; target++) {
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002135 nv->bus[bus].target[target].parameter.
Linus Torvalds1da177e2005-04-16 15:20:36 -07002136 auto_request_sense = 1;
2137 }
2138 } else {
2139 qla1280_set_defaults(ha);
2140 }
2141
2142 qla1280_print_settings(nv);
2143
2144 /* Disable RISC load of firmware. */
2145 ha->flags.disable_risc_code_load =
2146 nv->cntr_flags_1.disable_loading_risc_code;
2147
2148 if (IS_ISP1040(ha)) {
2149 uint16_t hwrev, cfg1, cdma_conf, ddma_conf;
2150
2151 hwrev = RD_REG_WORD(&reg->cfg_0) & ISP_CFG0_HWMSK;
2152
Christoph Hellwig 0888f4c2005-07-04 17:48:55 +02002153 cfg1 = RD_REG_WORD(&reg->cfg_1) & ~(BIT_4 | BIT_5 | BIT_6);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002154 cdma_conf = RD_REG_WORD(&reg->cdma_cfg);
2155 ddma_conf = RD_REG_WORD(&reg->ddma_cfg);
2156
2157 /* Busted fifo, says mjacob. */
Christoph Hellwig 0888f4c2005-07-04 17:48:55 +02002158 if (hwrev != ISP_CFG0_1040A)
2159 cfg1 |= nv->isp_config.fifo_threshold << 4;
2160
2161 cfg1 |= nv->isp_config.burst_enable << 2;
2162 WRT_REG_WORD(&reg->cfg_1, cfg1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002163
2164 WRT_REG_WORD(&reg->cdma_cfg, cdma_conf | CDMA_CONF_BENAB);
2165 WRT_REG_WORD(&reg->ddma_cfg, cdma_conf | DDMA_CONF_BENAB);
2166 } else {
Christoph Hellwig 0888f4c2005-07-04 17:48:55 +02002167 uint16_t cfg1, term;
2168
Linus Torvalds1da177e2005-04-16 15:20:36 -07002169 /* Set ISP hardware DMA burst */
Christoph Hellwig 0888f4c2005-07-04 17:48:55 +02002170 cfg1 = nv->isp_config.fifo_threshold << 4;
2171 cfg1 |= nv->isp_config.burst_enable << 2;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002172 /* Enable DMA arbitration on dual channel controllers */
2173 if (ha->ports > 1)
Christoph Hellwig 0888f4c2005-07-04 17:48:55 +02002174 cfg1 |= BIT_13;
2175 WRT_REG_WORD(&reg->cfg_1, cfg1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002176
2177 /* Set SCSI termination. */
Christoph Hellwig 0888f4c2005-07-04 17:48:55 +02002178 WRT_REG_WORD(&reg->gpio_enable,
2179 BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0);
2180 term = nv->termination.scsi_bus_1_control;
2181 term |= nv->termination.scsi_bus_0_control << 2;
2182 term |= nv->termination.auto_term_support << 7;
2183 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2184 WRT_REG_WORD(&reg->gpio_data, term);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002185 }
Christoph Hellwig 0888f4c2005-07-04 17:48:55 +02002186 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002187
2188 /* ISP parameter word. */
2189 mb[0] = MBC_SET_SYSTEM_PARAMETER;
2190 mb[1] = nv->isp_parameter;
2191 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2192
2193 if (IS_ISP1x40(ha)) {
2194 /* clock rate - for qla1240 and older, only */
2195 mb[0] = MBC_SET_CLOCK_RATE;
2196 mb[1] = 40;
2197 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
2198 }
2199
2200 /* Firmware feature word. */
2201 mb[0] = MBC_SET_FIRMWARE_FEATURES;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002202 mb[1] = nv->firmware_feature.f.enable_fast_posting;
2203 mb[1] |= nv->firmware_feature.f.report_lvd_bus_transition << 1;
2204 mb[1] |= nv->firmware_feature.f.disable_synchronous_backoff << 5;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002205#if defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_SGI_SN2)
2206 if (ia64_platform_is("sn2")) {
2207 printk(KERN_INFO "scsi(%li): Enabling SN2 PCI DMA "
2208 "workaround\n", ha->host_no);
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002209 mb[1] |= nv->firmware_feature.f.unused_9 << 9; /* XXX */
Linus Torvalds1da177e2005-04-16 15:20:36 -07002210 }
2211#endif
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002212 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002213
2214 /* Retry count and delay. */
2215 mb[0] = MBC_SET_RETRY_COUNT;
2216 mb[1] = nv->bus[0].retry_count;
2217 mb[2] = nv->bus[0].retry_delay;
2218 mb[6] = nv->bus[1].retry_count;
2219 mb[7] = nv->bus[1].retry_delay;
2220 status |= qla1280_mailbox_command(ha, BIT_7 | BIT_6 | BIT_2 |
2221 BIT_1 | BIT_0, &mb[0]);
2222
2223 /* ASYNC data setup time. */
2224 mb[0] = MBC_SET_ASYNC_DATA_SETUP;
2225 mb[1] = nv->bus[0].config_2.async_data_setup_time;
2226 mb[2] = nv->bus[1].config_2.async_data_setup_time;
2227 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2228
2229 /* Active negation states. */
2230 mb[0] = MBC_SET_ACTIVE_NEGATION;
2231 mb[1] = 0;
2232 if (nv->bus[0].config_2.req_ack_active_negation)
2233 mb[1] |= BIT_5;
2234 if (nv->bus[0].config_2.data_line_active_negation)
2235 mb[1] |= BIT_4;
2236 mb[2] = 0;
2237 if (nv->bus[1].config_2.req_ack_active_negation)
2238 mb[2] |= BIT_5;
2239 if (nv->bus[1].config_2.data_line_active_negation)
2240 mb[2] |= BIT_4;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002241 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002242
2243 mb[0] = MBC_SET_DATA_OVERRUN_RECOVERY;
2244 mb[1] = 2; /* Reset SCSI bus and return all outstanding IO */
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002245 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002246
2247 /* thingy */
2248 mb[0] = MBC_SET_PCI_CONTROL;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002249 mb[1] = BIT_1; /* Data DMA Channel Burst Enable */
2250 mb[2] = BIT_1; /* Command DMA Channel Burst Enable */
2251 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002252
2253 mb[0] = MBC_SET_TAG_AGE_LIMIT;
2254 mb[1] = 8;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002255 status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002256
2257 /* Selection timeout. */
2258 mb[0] = MBC_SET_SELECTION_TIMEOUT;
2259 mb[1] = nv->bus[0].selection_timeout;
2260 mb[2] = nv->bus[1].selection_timeout;
Christoph Hellwig 7a347662005-07-04 17:49:22 +02002261 status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002262
2263 for (bus = 0; bus < ha->ports; bus++)
2264 status |= qla1280_config_bus(ha, bus);
2265
2266 if (status)
2267 dprintk(2, "qla1280_nvram_config: **** FAILED ****\n");
2268
2269 LEAVE("qla1280_nvram_config");
2270 return status;
2271}
2272
2273/*
2274 * Get NVRAM data word
2275 * Calculates word position in NVRAM and calls request routine to
2276 * get the word from NVRAM.
2277 *
2278 * Input:
2279 * ha = adapter block pointer.
2280 * address = NVRAM word address.
2281 *
2282 * Returns:
2283 * data word.
2284 */
2285static uint16_t
2286qla1280_get_nvram_word(struct scsi_qla_host *ha, uint32_t address)
2287{
2288 uint32_t nv_cmd;
2289 uint16_t data;
2290
2291 nv_cmd = address << 16;
2292 nv_cmd |= NV_READ_OP;
2293
2294 data = le16_to_cpu(qla1280_nvram_request(ha, nv_cmd));
2295
2296 dprintk(8, "qla1280_get_nvram_word: exiting normally NVRAM data = "
2297 "0x%x", data);
2298
2299 return data;
2300}
2301
2302/*
2303 * NVRAM request
2304 * Sends read command to NVRAM and gets data from NVRAM.
2305 *
2306 * Input:
2307 * ha = adapter block pointer.
2308 * nv_cmd = Bit 26 = start bit
2309 * Bit 25, 24 = opcode
2310 * Bit 23-16 = address
2311 * Bit 15-0 = write data
2312 *
2313 * Returns:
2314 * data word.
2315 */
2316static uint16_t
2317qla1280_nvram_request(struct scsi_qla_host *ha, uint32_t nv_cmd)
2318{
2319 struct device_reg __iomem *reg = ha->iobase;
2320 int cnt;
2321 uint16_t data = 0;
2322 uint16_t reg_data;
2323
2324 /* Send command to NVRAM. */
2325
2326 nv_cmd <<= 5;
2327 for (cnt = 0; cnt < 11; cnt++) {
2328 if (nv_cmd & BIT_31)
2329 qla1280_nv_write(ha, NV_DATA_OUT);
2330 else
2331 qla1280_nv_write(ha, 0);
2332 nv_cmd <<= 1;
2333 }
2334
2335 /* Read data from NVRAM. */
2336
2337 for (cnt = 0; cnt < 16; cnt++) {
2338 WRT_REG_WORD(&reg->nvram, (NV_SELECT | NV_CLOCK));
2339 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2340 NVRAM_DELAY();
2341 data <<= 1;
2342 reg_data = RD_REG_WORD(&reg->nvram);
2343 if (reg_data & NV_DATA_IN)
2344 data |= BIT_0;
2345 WRT_REG_WORD(&reg->nvram, NV_SELECT);
2346 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2347 NVRAM_DELAY();
2348 }
2349
2350 /* Deselect chip. */
2351
2352 WRT_REG_WORD(&reg->nvram, NV_DESELECT);
2353 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2354 NVRAM_DELAY();
2355
2356 return data;
2357}
2358
2359static void
2360qla1280_nv_write(struct scsi_qla_host *ha, uint16_t data)
2361{
2362 struct device_reg __iomem *reg = ha->iobase;
2363
2364 WRT_REG_WORD(&reg->nvram, data | NV_SELECT);
2365 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2366 NVRAM_DELAY();
2367 WRT_REG_WORD(&reg->nvram, data | NV_SELECT | NV_CLOCK);
2368 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2369 NVRAM_DELAY();
2370 WRT_REG_WORD(&reg->nvram, data | NV_SELECT);
2371 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2372 NVRAM_DELAY();
2373}
2374
2375/*
2376 * Mailbox Command
2377 * Issue mailbox command and waits for completion.
2378 *
2379 * Input:
2380 * ha = adapter block pointer.
2381 * mr = mailbox registers to load.
2382 * mb = data pointer for mailbox registers.
2383 *
2384 * Output:
2385 * mb[MAILBOX_REGISTER_COUNT] = returned mailbox data.
2386 *
2387 * Returns:
2388 * 0 = success
2389 */
2390static int
2391qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
2392{
2393 struct device_reg __iomem *reg = ha->iobase;
2394#if 0
2395 LIST_HEAD(done_q);
2396#endif
2397 int status = 0;
2398 int cnt;
2399 uint16_t *optr, *iptr;
2400 uint16_t __iomem *mptr;
2401 uint16_t data;
Peter Zijlstra6e9a4732006-09-30 23:28:10 -07002402 DECLARE_COMPLETION_ONSTACK(wait);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002403 struct timer_list timer;
2404
2405 ENTER("qla1280_mailbox_command");
2406
2407 if (ha->mailbox_wait) {
2408 printk(KERN_ERR "Warning mailbox wait already in use!\n");
2409 }
2410 ha->mailbox_wait = &wait;
2411
2412 /*
2413 * We really should start out by verifying that the mailbox is
2414 * available before starting sending the command data
2415 */
2416 /* Load mailbox registers. */
2417 mptr = (uint16_t __iomem *) &reg->mailbox0;
2418 iptr = mb;
2419 for (cnt = 0; cnt < MAILBOX_REGISTER_COUNT; cnt++) {
2420 if (mr & BIT_0) {
2421 WRT_REG_WORD(mptr, (*iptr));
2422 }
2423
2424 mr >>= 1;
2425 mptr++;
2426 iptr++;
2427 }
2428
2429 /* Issue set host interrupt command. */
2430
2431 /* set up a timer just in case we're really jammed */
2432 init_timer(&timer);
2433 timer.expires = jiffies + 20*HZ;
2434 timer.data = (unsigned long)ha;
2435 timer.function = qla1280_mailbox_timeout;
2436 add_timer(&timer);
2437
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05002438 spin_unlock_irq(ha->host->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002439 WRT_REG_WORD(&reg->host_cmd, HC_SET_HOST_INT);
2440 data = qla1280_debounce_register(&reg->istatus);
2441
2442 wait_for_completion(&wait);
2443 del_timer_sync(&timer);
2444
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05002445 spin_lock_irq(ha->host->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002446
2447 ha->mailbox_wait = NULL;
2448
2449 /* Check for mailbox command timeout. */
2450 if (ha->mailbox_out[0] != MBS_CMD_CMP) {
2451 printk(KERN_WARNING "qla1280_mailbox_command: Command failed, "
2452 "mailbox0 = 0x%04x, mailbox_out0 = 0x%04x, istatus = "
2453 "0x%04x\n",
2454 mb[0], ha->mailbox_out[0], RD_REG_WORD(&reg->istatus));
2455 printk(KERN_WARNING "m0 %04x, m1 %04x, m2 %04x, m3 %04x\n",
2456 RD_REG_WORD(&reg->mailbox0), RD_REG_WORD(&reg->mailbox1),
2457 RD_REG_WORD(&reg->mailbox2), RD_REG_WORD(&reg->mailbox3));
2458 printk(KERN_WARNING "m4 %04x, m5 %04x, m6 %04x, m7 %04x\n",
2459 RD_REG_WORD(&reg->mailbox4), RD_REG_WORD(&reg->mailbox5),
2460 RD_REG_WORD(&reg->mailbox6), RD_REG_WORD(&reg->mailbox7));
2461 status = 1;
2462 }
2463
2464 /* Load return mailbox registers. */
2465 optr = mb;
2466 iptr = (uint16_t *) &ha->mailbox_out[0];
2467 mr = MAILBOX_REGISTER_COUNT;
2468 memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t));
2469
2470#if 0
2471 /* Go check for any response interrupts pending. */
2472 qla1280_isr(ha, &done_q);
2473#endif
2474
2475 if (ha->flags.reset_marker)
2476 qla1280_rst_aen(ha);
2477
2478#if 0
2479 if (!list_empty(&done_q))
2480 qla1280_done(ha, &done_q);
2481#endif
2482
2483 if (status)
2484 dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = "
2485 "0x%x ****\n", mb[0]);
2486
2487 LEAVE("qla1280_mailbox_command");
2488 return status;
2489}
2490
2491/*
2492 * qla1280_poll
2493 * Polls ISP for interrupts.
2494 *
2495 * Input:
2496 * ha = adapter block pointer.
2497 */
2498static void
2499qla1280_poll(struct scsi_qla_host *ha)
2500{
2501 struct device_reg __iomem *reg = ha->iobase;
2502 uint16_t data;
2503 LIST_HEAD(done_q);
2504
2505 /* ENTER("qla1280_poll"); */
2506
2507 /* Check for pending interrupts. */
2508 data = RD_REG_WORD(&reg->istatus);
2509 if (data & RISC_INT)
2510 qla1280_isr(ha, &done_q);
2511
2512 if (!ha->mailbox_wait) {
2513 if (ha->flags.reset_marker)
2514 qla1280_rst_aen(ha);
2515 }
2516
2517 if (!list_empty(&done_q))
2518 qla1280_done(ha);
2519
2520 /* LEAVE("qla1280_poll"); */
2521}
2522
2523/*
2524 * qla1280_bus_reset
2525 * Issue SCSI bus reset.
2526 *
2527 * Input:
2528 * ha = adapter block pointer.
2529 * bus = SCSI bus number.
2530 *
2531 * Returns:
2532 * 0 = success
2533 */
2534static int
2535qla1280_bus_reset(struct scsi_qla_host *ha, int bus)
2536{
2537 uint16_t mb[MAILBOX_REGISTER_COUNT];
2538 uint16_t reset_delay;
2539 int status;
2540
2541 dprintk(3, "qla1280_bus_reset: entered\n");
2542
2543 if (qla1280_verbose)
2544 printk(KERN_INFO "scsi(%li:%i): Resetting SCSI BUS\n",
2545 ha->host_no, bus);
2546
2547 reset_delay = ha->bus_settings[bus].bus_reset_delay;
2548 mb[0] = MBC_BUS_RESET;
2549 mb[1] = reset_delay;
2550 mb[2] = (uint16_t) bus;
2551 status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2552
2553 if (status) {
2554 if (ha->bus_settings[bus].failed_reset_count > 2)
2555 ha->bus_settings[bus].scsi_bus_dead = 1;
2556 ha->bus_settings[bus].failed_reset_count++;
2557 } else {
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05002558 spin_unlock_irq(ha->host->host_lock);
Nishanth Aravamudan117e4b22005-06-20 23:55:07 +02002559 ssleep(reset_delay);
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05002560 spin_lock_irq(ha->host->host_lock);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002561
2562 ha->bus_settings[bus].scsi_bus_dead = 0;
2563 ha->bus_settings[bus].failed_reset_count = 0;
2564 ha->bus_settings[bus].reset_marker = 0;
2565 /* Issue marker command. */
2566 qla1280_marker(ha, bus, 0, 0, MK_SYNC_ALL);
2567 }
2568
2569 /*
2570 * We should probably call qla1280_set_target_parameters()
2571 * here as well for all devices on the bus.
2572 */
2573
2574 if (status)
2575 dprintk(2, "qla1280_bus_reset: **** FAILED ****\n");
2576 else
2577 dprintk(3, "qla1280_bus_reset: exiting normally\n");
2578
2579 return status;
2580}
2581
2582/*
2583 * qla1280_device_reset
2584 * Issue bus device reset message to the target.
2585 *
2586 * Input:
2587 * ha = adapter block pointer.
2588 * bus = SCSI BUS number.
2589 * target = SCSI ID.
2590 *
2591 * Returns:
2592 * 0 = success
2593 */
2594static int
2595qla1280_device_reset(struct scsi_qla_host *ha, int bus, int target)
2596{
2597 uint16_t mb[MAILBOX_REGISTER_COUNT];
2598 int status;
2599
2600 ENTER("qla1280_device_reset");
2601
2602 mb[0] = MBC_ABORT_TARGET;
2603 mb[1] = (bus ? (target | BIT_7) : target) << 8;
2604 mb[2] = 1;
2605 status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);
2606
2607 /* Issue marker command. */
2608 qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
2609
2610 if (status)
2611 dprintk(2, "qla1280_device_reset: **** FAILED ****\n");
2612
2613 LEAVE("qla1280_device_reset");
2614 return status;
2615}
2616
2617/*
2618 * qla1280_abort_device
2619 * Issue an abort message to the device
2620 *
2621 * Input:
2622 * ha = adapter block pointer.
2623 * bus = SCSI BUS.
2624 * target = SCSI ID.
2625 * lun = SCSI LUN.
2626 *
2627 * Returns:
2628 * 0 = success
2629 */
2630static int
2631qla1280_abort_device(struct scsi_qla_host *ha, int bus, int target, int lun)
2632{
2633 uint16_t mb[MAILBOX_REGISTER_COUNT];
2634 int status;
2635
2636 ENTER("qla1280_abort_device");
2637
2638 mb[0] = MBC_ABORT_DEVICE;
2639 mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
2640 status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
2641
2642 /* Issue marker command. */
2643 qla1280_marker(ha, bus, target, lun, MK_SYNC_ID_LUN);
2644
2645 if (status)
2646 dprintk(2, "qla1280_abort_device: **** FAILED ****\n");
2647
2648 LEAVE("qla1280_abort_device");
2649 return status;
2650}
2651
2652/*
2653 * qla1280_abort_command
2654 * Abort command aborts a specified IOCB.
2655 *
2656 * Input:
2657 * ha = adapter block pointer.
2658 * sp = SB structure pointer.
2659 *
2660 * Returns:
2661 * 0 = success
2662 */
2663static int
2664qla1280_abort_command(struct scsi_qla_host *ha, struct srb * sp, int handle)
2665{
2666 uint16_t mb[MAILBOX_REGISTER_COUNT];
2667 unsigned int bus, target, lun;
2668 int status;
2669
2670 ENTER("qla1280_abort_command");
2671
2672 bus = SCSI_BUS_32(sp->cmd);
2673 target = SCSI_TCN_32(sp->cmd);
2674 lun = SCSI_LUN_32(sp->cmd);
2675
2676 sp->flags |= SRB_ABORT_PENDING;
2677
2678 mb[0] = MBC_ABORT_COMMAND;
2679 mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
2680 mb[2] = handle >> 16;
2681 mb[3] = handle & 0xffff;
2682 status = qla1280_mailbox_command(ha, 0x0f, &mb[0]);
2683
2684 if (status) {
2685 dprintk(2, "qla1280_abort_command: **** FAILED ****\n");
2686 sp->flags &= ~SRB_ABORT_PENDING;
2687 }
2688
2689
2690 LEAVE("qla1280_abort_command");
2691 return status;
2692}
2693
2694/*
2695 * qla1280_reset_adapter
2696 * Reset adapter.
2697 *
2698 * Input:
2699 * ha = adapter block pointer.
2700 */
2701static void
2702qla1280_reset_adapter(struct scsi_qla_host *ha)
2703{
2704 struct device_reg __iomem *reg = ha->iobase;
2705
2706 ENTER("qla1280_reset_adapter");
2707
2708 /* Disable ISP chip */
2709 ha->flags.online = 0;
2710 WRT_REG_WORD(&reg->ictrl, ISP_RESET);
2711 WRT_REG_WORD(&reg->host_cmd,
2712 HC_RESET_RISC | HC_RELEASE_RISC | HC_DISABLE_BIOS);
2713 RD_REG_WORD(&reg->id_l); /* Flush PCI write */
2714
2715 LEAVE("qla1280_reset_adapter");
2716}
2717
2718/*
2719 * Issue marker command.
2720 * Function issues marker IOCB.
2721 *
2722 * Input:
2723 * ha = adapter block pointer.
2724 * bus = SCSI BUS number
2725 * id = SCSI ID
2726 * lun = SCSI LUN
2727 * type = marker modifier
2728 */
2729static void
2730qla1280_marker(struct scsi_qla_host *ha, int bus, int id, int lun, u8 type)
2731{
2732 struct mrk_entry *pkt;
2733
2734 ENTER("qla1280_marker");
2735
2736 /* Get request packet. */
2737 if ((pkt = (struct mrk_entry *) qla1280_req_pkt(ha))) {
2738 pkt->entry_type = MARKER_TYPE;
2739 pkt->lun = (uint8_t) lun;
2740 pkt->target = (uint8_t) (bus ? (id | BIT_7) : id);
2741 pkt->modifier = type;
2742 pkt->entry_status = 0;
2743
2744 /* Issue command to ISP */
2745 qla1280_isp_cmd(ha);
2746 }
2747
2748 LEAVE("qla1280_marker");
2749}
2750
2751
2752/*
2753 * qla1280_64bit_start_scsi
2754 * The start SCSI is responsible for building request packets on
2755 * request ring and modifying ISP input pointer.
2756 *
2757 * Input:
2758 * ha = adapter block pointer.
2759 * sp = SB structure pointer.
2760 *
2761 * Returns:
2762 * 0 = success, was able to issue command.
2763 */
2764#ifdef QLA_64BIT_PTR
2765static int
2766qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
2767{
2768 struct device_reg __iomem *reg = ha->iobase;
2769 struct scsi_cmnd *cmd = sp->cmd;
2770 cmd_a64_entry_t *pkt;
Christoph Hellwig 8d6810d2005-07-04 17:49:26 +02002771 __le32 *dword_ptr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002772 dma_addr_t dma_handle;
2773 int status = 0;
2774 int cnt;
2775 int req_cnt;
Jes Sorensen5c1da582007-11-09 14:40:41 +01002776 int seg_cnt;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002777 u8 dir;
2778
2779 ENTER("qla1280_64bit_start_scsi:");
2780
2781 /* Calculate number of entries and segments required. */
2782 req_cnt = 1;
Jes Sorensen5c1da582007-11-09 14:40:41 +01002783 seg_cnt = scsi_dma_map(cmd);
2784 if (seg_cnt > 0) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07002785 if (seg_cnt > 2) {
2786 req_cnt += (seg_cnt - 2) / 5;
2787 if ((seg_cnt - 2) % 5)
2788 req_cnt++;
2789 }
Jes Sorensen5c1da582007-11-09 14:40:41 +01002790 } else if (seg_cnt < 0) {
2791 status = 1;
2792 goto out;
Linus Torvalds1da177e2005-04-16 15:20:36 -07002793 }
2794
2795 if ((req_cnt + 2) >= ha->req_q_cnt) {
2796 /* Calculate number of free request entries. */
2797 cnt = RD_REG_WORD(&reg->mailbox4);
2798 if (ha->req_ring_index < cnt)
2799 ha->req_q_cnt = cnt - ha->req_ring_index;
2800 else
2801 ha->req_q_cnt =
2802 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
2803 }
2804
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02002805 dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n",
2806 ha->req_q_cnt, seg_cnt);
2807
Linus Torvalds1da177e2005-04-16 15:20:36 -07002808 /* If room for request in request ring. */
2809 if ((req_cnt + 2) >= ha->req_q_cnt) {
2810 status = 1;
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02002811 dprintk(2, "qla1280_start_scsi: in-ptr=0x%x req_q_cnt="
Linus Torvalds1da177e2005-04-16 15:20:36 -07002812 "0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
2813 req_cnt);
2814 goto out;
2815 }
2816
2817 /* Check for room in outstanding command list. */
2818 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
2819 ha->outstanding_cmds[cnt] != 0; cnt++);
2820
2821 if (cnt >= MAX_OUTSTANDING_COMMANDS) {
2822 status = 1;
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02002823 dprintk(2, "qla1280_start_scsi: NO ROOM IN "
Linus Torvalds1da177e2005-04-16 15:20:36 -07002824 "OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
2825 goto out;
2826 }
2827
2828 ha->outstanding_cmds[cnt] = sp;
2829 ha->req_q_cnt -= req_cnt;
2830 CMD_HANDLE(sp->cmd) = (unsigned char *)(unsigned long)(cnt + 1);
2831
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02002832 dprintk(2, "start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002833 cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd));
2834 dprintk(2, " bus %i, target %i, lun %i\n",
2835 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
2836 qla1280_dump_buffer(2, cmd->cmnd, MAX_COMMAND_SIZE);
2837
2838 /*
2839 * Build command packet.
2840 */
2841 pkt = (cmd_a64_entry_t *) ha->request_ring_ptr;
2842
2843 pkt->entry_type = COMMAND_A64_TYPE;
2844 pkt->entry_count = (uint8_t) req_cnt;
2845 pkt->sys_define = (uint8_t) ha->req_ring_index;
2846 pkt->entry_status = 0;
2847 pkt->handle = cpu_to_le32(cnt);
2848
2849 /* Zero out remaining portion of packet. */
2850 memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
2851
2852 /* Set ISP command timeout. */
Jes Sorensen15d1f532006-09-25 05:44:57 -04002853 pkt->timeout = cpu_to_le16(cmd->timeout_per_command/HZ);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002854
2855 /* Set device target ID and LUN */
2856 pkt->lun = SCSI_LUN_32(cmd);
2857 pkt->target = SCSI_BUS_32(cmd) ?
2858 (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
2859
2860 /* Enable simple tag queuing if device supports it. */
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05002861 if (cmd->device->simple_tags)
Linus Torvalds1da177e2005-04-16 15:20:36 -07002862 pkt->control_flags |= cpu_to_le16(BIT_3);
2863
2864 /* Load SCSI command packet. */
2865 pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
2866 memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
2867 /* dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
2868
2869 /* Set transfer direction. */
2870 dir = qla1280_data_direction(cmd);
2871 pkt->control_flags |= cpu_to_le16(dir);
2872
2873 /* Set total data segment count. */
2874 pkt->dseg_count = cpu_to_le16(seg_cnt);
2875
2876 /*
2877 * Load data segments.
2878 */
2879 if (seg_cnt) { /* If data transfer. */
Jes Sorensen5c1da582007-11-09 14:40:41 +01002880 struct scatterlist *sg, *s;
Jens Axboea0441892007-05-09 13:02:43 +02002881 int remseg = seg_cnt;
Jes Sorensen5c1da582007-11-09 14:40:41 +01002882
2883 sg = scsi_sglist(cmd);
2884
Linus Torvalds1da177e2005-04-16 15:20:36 -07002885 /* Setup packet address segment pointer. */
2886 dword_ptr = (u32 *)&pkt->dseg_0_address;
2887
Jes Sorensen5c1da582007-11-09 14:40:41 +01002888 /* Load command entry data segments. */
2889 for_each_sg(sg, s, seg_cnt, cnt) {
2890 if (cnt == 2)
2891 break;
2892
2893 dma_handle = sg_dma_address(s);
2894#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
2895 if (ha->flags.use_pci_vchannel)
2896 sn_pci_set_vchan(ha->pdev,
2897 (unsigned long *)&dma_handle,
2898 SCSI_BUS_32(cmd));
2899#endif
2900 *dword_ptr++ =
2901 cpu_to_le32(pci_dma_lo32(dma_handle));
2902 *dword_ptr++ =
2903 cpu_to_le32(pci_dma_hi32(dma_handle));
2904 *dword_ptr++ = cpu_to_le32(sg_dma_len(s));
2905 dprintk(3, "S/G Segment phys_addr=%x %x, len=0x%x\n",
2906 cpu_to_le32(pci_dma_hi32(dma_handle)),
2907 cpu_to_le32(pci_dma_lo32(dma_handle)),
2908 cpu_to_le32(sg_dma_len(sg_next(s))));
2909 remseg--;
2910 }
2911 dprintk(5, "qla1280_64bit_start_scsi: Scatter/gather "
2912 "command packet data - b %i, t %i, l %i \n",
2913 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd),
2914 SCSI_LUN_32(cmd));
2915 qla1280_dump_buffer(5, (char *)pkt,
2916 REQUEST_ENTRY_SIZE);
2917
2918 /*
2919 * Build continuation packets.
2920 */
2921 dprintk(3, "S/G Building Continuation...seg_cnt=0x%x "
2922 "remains\n", seg_cnt);
2923
2924 while (remseg > 0) {
2925 /* Update sg start */
2926 sg = s;
2927 /* Adjust ring index. */
2928 ha->req_ring_index++;
2929 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
2930 ha->req_ring_index = 0;
2931 ha->request_ring_ptr =
2932 ha->request_ring;
2933 } else
2934 ha->request_ring_ptr++;
2935
2936 pkt = (cmd_a64_entry_t *)ha->request_ring_ptr;
2937
2938 /* Zero out packet. */
2939 memset(pkt, 0, REQUEST_ENTRY_SIZE);
2940
2941 /* Load packet defaults. */
2942 ((struct cont_a64_entry *) pkt)->entry_type =
2943 CONTINUE_A64_TYPE;
2944 ((struct cont_a64_entry *) pkt)->entry_count = 1;
2945 ((struct cont_a64_entry *) pkt)->sys_define =
2946 (uint8_t)ha->req_ring_index;
2947 /* Setup packet address segment pointer. */
2948 dword_ptr =
2949 (u32 *)&((struct cont_a64_entry *) pkt)->dseg_0_address;
2950
2951 /* Load continuation entry data segments. */
2952 for_each_sg(sg, s, remseg, cnt) {
2953 if (cnt == 5)
Jens Axboea0441892007-05-09 13:02:43 +02002954 break;
2955 dma_handle = sg_dma_address(s);
Linus Torvalds1da177e2005-04-16 15:20:36 -07002956#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
2957 if (ha->flags.use_pci_vchannel)
2958 sn_pci_set_vchan(ha->pdev,
Jes Sorensen5c1da582007-11-09 14:40:41 +01002959 (unsigned long *)&dma_handle,
Linus Torvalds1da177e2005-04-16 15:20:36 -07002960 SCSI_BUS_32(cmd));
2961#endif
2962 *dword_ptr++ =
2963 cpu_to_le32(pci_dma_lo32(dma_handle));
2964 *dword_ptr++ =
2965 cpu_to_le32(pci_dma_hi32(dma_handle));
Jes Sorensen5c1da582007-11-09 14:40:41 +01002966 *dword_ptr++ =
2967 cpu_to_le32(sg_dma_len(s));
2968 dprintk(3, "S/G Segment Cont. phys_addr=%x %x, len=0x%x\n",
Linus Torvalds1da177e2005-04-16 15:20:36 -07002969 cpu_to_le32(pci_dma_hi32(dma_handle)),
2970 cpu_to_le32(pci_dma_lo32(dma_handle)),
Jes Sorensen5c1da582007-11-09 14:40:41 +01002971 cpu_to_le32(sg_dma_len(s)));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002972 }
Jes Sorensen5c1da582007-11-09 14:40:41 +01002973 remseg -= cnt;
2974 dprintk(5, "qla1280_64bit_start_scsi: "
2975 "continuation packet data - b %i, t "
2976 "%i, l %i \n", SCSI_BUS_32(cmd),
2977 SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
Linus Torvalds1da177e2005-04-16 15:20:36 -07002978 qla1280_dump_buffer(5, (char *)pkt,
2979 REQUEST_ENTRY_SIZE);
2980 }
2981 } else { /* No data transfer */
2982 dprintk(5, "qla1280_64bit_start_scsi: No data, command "
2983 "packet data - b %i, t %i, l %i \n",
2984 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
2985 qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
2986 }
2987 /* Adjust ring index. */
2988 ha->req_ring_index++;
2989 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
2990 ha->req_ring_index = 0;
2991 ha->request_ring_ptr = ha->request_ring;
2992 } else
2993 ha->request_ring_ptr++;
2994
2995 /* Set chip new ring index. */
2996 dprintk(2,
2997 "qla1280_64bit_start_scsi: Wakeup RISC for pending command\n");
2998 sp->flags |= SRB_SENT;
2999 ha->actthreads++;
3000 WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
3001 /* Enforce mmio write ordering; see comment in qla1280_isp_cmd(). */
3002 mmiowb();
3003
3004 out:
3005 if (status)
3006 dprintk(2, "qla1280_64bit_start_scsi: **** FAILED ****\n");
3007 else
3008 dprintk(3, "qla1280_64bit_start_scsi: exiting normally\n");
3009
3010 return status;
3011}
3012#else /* !QLA_64BIT_PTR */
3013
3014/*
3015 * qla1280_32bit_start_scsi
3016 * The start SCSI is responsible for building request packets on
3017 * request ring and modifying ISP input pointer.
3018 *
3019 * The Qlogic firmware interface allows every queue slot to have a SCSI
3020 * command and up to 4 scatter/gather (SG) entries. If we need more
3021 * than 4 SG entries, then continuation entries are used that can
3022 * hold another 7 entries each. The start routine determines if there
3023 * is eought empty slots then build the combination of requests to
3024 * fulfill the OS request.
3025 *
3026 * Input:
3027 * ha = adapter block pointer.
3028 * sp = SCSI Request Block structure pointer.
3029 *
3030 * Returns:
3031 * 0 = success, was able to issue command.
3032 */
3033static int
3034qla1280_32bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp)
3035{
3036 struct device_reg __iomem *reg = ha->iobase;
3037 struct scsi_cmnd *cmd = sp->cmd;
3038 struct cmd_entry *pkt;
Christoph Hellwig 8d6810d2005-07-04 17:49:26 +02003039 __le32 *dword_ptr;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003040 int status = 0;
3041 int cnt;
3042 int req_cnt;
Jes Sorensen5c1da582007-11-09 14:40:41 +01003043 int seg_cnt;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003044 u8 dir;
3045
3046 ENTER("qla1280_32bit_start_scsi");
3047
3048 dprintk(1, "32bit_start: cmd=%p sp=%p CDB=%x\n", cmd, sp,
3049 cmd->cmnd[0]);
3050
3051 /* Calculate number of entries and segments required. */
FUJITA Tomonori3a43e692008-01-08 23:07:01 +09003052 req_cnt = 1;
Jes Sorensen5c1da582007-11-09 14:40:41 +01003053 seg_cnt = scsi_dma_map(cmd);
3054 if (seg_cnt) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003055 /*
3056 * if greater than four sg entries then we need to allocate
3057 * continuation entries
3058 */
3059 if (seg_cnt > 4) {
3060 req_cnt += (seg_cnt - 4) / 7;
3061 if ((seg_cnt - 4) % 7)
3062 req_cnt++;
3063 }
3064 dprintk(3, "S/G Transfer cmd=%p seg_cnt=0x%x, req_cnt=%x\n",
3065 cmd, seg_cnt, req_cnt);
Jes Sorensen5c1da582007-11-09 14:40:41 +01003066 } else if (seg_cnt < 0) {
3067 status = 1;
3068 goto out;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003069 }
3070
3071 if ((req_cnt + 2) >= ha->req_q_cnt) {
3072 /* Calculate number of free request entries. */
3073 cnt = RD_REG_WORD(&reg->mailbox4);
3074 if (ha->req_ring_index < cnt)
3075 ha->req_q_cnt = cnt - ha->req_ring_index;
3076 else
3077 ha->req_q_cnt =
3078 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
3079 }
3080
3081 dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n",
3082 ha->req_q_cnt, seg_cnt);
3083 /* If room for request in request ring. */
3084 if ((req_cnt + 2) >= ha->req_q_cnt) {
3085 status = 1;
3086 dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, "
3087 "req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index,
3088 ha->req_q_cnt, req_cnt);
3089 goto out;
3090 }
3091
3092 /* Check for empty slot in outstanding command list. */
3093 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
3094 (ha->outstanding_cmds[cnt] != 0); cnt++) ;
3095
3096 if (cnt >= MAX_OUTSTANDING_COMMANDS) {
3097 status = 1;
3098 dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING "
3099 "ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt);
3100 goto out;
3101 }
3102
3103 CMD_HANDLE(sp->cmd) = (unsigned char *) (unsigned long)(cnt + 1);
3104 ha->outstanding_cmds[cnt] = sp;
3105 ha->req_q_cnt -= req_cnt;
3106
3107 /*
3108 * Build command packet.
3109 */
3110 pkt = (struct cmd_entry *) ha->request_ring_ptr;
3111
3112 pkt->entry_type = COMMAND_TYPE;
3113 pkt->entry_count = (uint8_t) req_cnt;
3114 pkt->sys_define = (uint8_t) ha->req_ring_index;
3115 pkt->entry_status = 0;
3116 pkt->handle = cpu_to_le32(cnt);
3117
3118 /* Zero out remaining portion of packet. */
3119 memset(((char *)pkt + 8), 0, (REQUEST_ENTRY_SIZE - 8));
3120
3121 /* Set ISP command timeout. */
Jes Sorensen15d1f532006-09-25 05:44:57 -04003122 pkt->timeout = cpu_to_le16(cmd->timeout_per_command/HZ);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003123
3124 /* Set device target ID and LUN */
3125 pkt->lun = SCSI_LUN_32(cmd);
3126 pkt->target = SCSI_BUS_32(cmd) ?
3127 (SCSI_TCN_32(cmd) | BIT_7) : SCSI_TCN_32(cmd);
3128
3129 /* Enable simple tag queuing if device supports it. */
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05003130 if (cmd->device->simple_tags)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003131 pkt->control_flags |= cpu_to_le16(BIT_3);
3132
3133 /* Load SCSI command packet. */
3134 pkt->cdb_len = cpu_to_le16(CMD_CDBLEN(cmd));
3135 memcpy(pkt->scsi_cdb, &(CMD_CDBP(cmd)), CMD_CDBLEN(cmd));
3136
3137 /*dprintk(1, "Build packet for command[0]=0x%x\n",pkt->scsi_cdb[0]); */
3138 /* Set transfer direction. */
3139 dir = qla1280_data_direction(cmd);
3140 pkt->control_flags |= cpu_to_le16(dir);
3141
3142 /* Set total data segment count. */
3143 pkt->dseg_count = cpu_to_le16(seg_cnt);
3144
3145 /*
3146 * Load data segments.
3147 */
3148 if (seg_cnt) {
Jes Sorensen5c1da582007-11-09 14:40:41 +01003149 struct scatterlist *sg, *s;
Jens Axboea0441892007-05-09 13:02:43 +02003150 int remseg = seg_cnt;
Jes Sorensen5c1da582007-11-09 14:40:41 +01003151
3152 sg = scsi_sglist(cmd);
3153
Linus Torvalds1da177e2005-04-16 15:20:36 -07003154 /* Setup packet address segment pointer. */
3155 dword_ptr = &pkt->dseg_0_address;
3156
Jes Sorensen5c1da582007-11-09 14:40:41 +01003157 dprintk(3, "Building S/G data segments..\n");
3158 qla1280_dump_buffer(1, (char *)sg, 4 * 16);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003159
Jes Sorensen5c1da582007-11-09 14:40:41 +01003160 /* Load command entry data segments. */
3161 for_each_sg(sg, s, seg_cnt, cnt) {
3162 if (cnt == 4)
3163 break;
3164 *dword_ptr++ =
3165 cpu_to_le32(pci_dma_lo32(sg_dma_address(s)));
3166 *dword_ptr++ = cpu_to_le32(sg_dma_len(s));
3167 dprintk(3, "S/G Segment phys_addr=0x%lx, len=0x%x\n",
3168 (pci_dma_lo32(sg_dma_address(s))),
3169 (sg_dma_len(s)));
3170 remseg--;
3171 }
3172 /*
3173 * Build continuation packets.
3174 */
3175 dprintk(3, "S/G Building Continuation"
3176 "...seg_cnt=0x%x remains\n", seg_cnt);
3177 while (remseg > 0) {
3178 /* Continue from end point */
3179 sg = s;
3180 /* Adjust ring index. */
3181 ha->req_ring_index++;
3182 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3183 ha->req_ring_index = 0;
3184 ha->request_ring_ptr =
3185 ha->request_ring;
3186 } else
3187 ha->request_ring_ptr++;
3188
3189 pkt = (struct cmd_entry *)ha->request_ring_ptr;
3190
3191 /* Zero out packet. */
3192 memset(pkt, 0, REQUEST_ENTRY_SIZE);
3193
3194 /* Load packet defaults. */
3195 ((struct cont_entry *) pkt)->
3196 entry_type = CONTINUE_TYPE;
3197 ((struct cont_entry *) pkt)->entry_count = 1;
3198
3199 ((struct cont_entry *) pkt)->sys_define =
3200 (uint8_t) ha->req_ring_index;
3201
3202 /* Setup packet address segment pointer. */
3203 dword_ptr =
3204 &((struct cont_entry *) pkt)->dseg_0_address;
3205
3206 /* Load continuation entry data segments. */
3207 for_each_sg(sg, s, remseg, cnt) {
3208 if (cnt == 7)
Jens Axboea0441892007-05-09 13:02:43 +02003209 break;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003210 *dword_ptr++ =
Jens Axboea0441892007-05-09 13:02:43 +02003211 cpu_to_le32(pci_dma_lo32(sg_dma_address(s)));
Jes Sorensen5c1da582007-11-09 14:40:41 +01003212 *dword_ptr++ =
3213 cpu_to_le32(sg_dma_len(s));
3214 dprintk(1,
3215 "S/G Segment Cont. phys_addr=0x%x, "
3216 "len=0x%x\n",
3217 cpu_to_le32(pci_dma_lo32(sg_dma_address(s))),
3218 cpu_to_le32(sg_dma_len(s)));
Linus Torvalds1da177e2005-04-16 15:20:36 -07003219 }
Jes Sorensen5c1da582007-11-09 14:40:41 +01003220 remseg -= cnt;
3221 dprintk(5, "qla1280_32bit_start_scsi: "
3222 "continuation packet data - "
3223 "scsi(%i:%i:%i)\n", SCSI_BUS_32(cmd),
3224 SCSI_TCN_32(cmd), SCSI_LUN_32(cmd));
3225 qla1280_dump_buffer(5, (char *)pkt,
3226 REQUEST_ENTRY_SIZE);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003227 }
3228 } else { /* No data transfer at all */
3229 dprintk(5, "qla1280_32bit_start_scsi: No data, command "
3230 "packet data - \n");
3231 qla1280_dump_buffer(5, (char *)pkt, REQUEST_ENTRY_SIZE);
3232 }
3233 dprintk(5, "qla1280_32bit_start_scsi: First IOCB block:\n");
3234 qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
3235 REQUEST_ENTRY_SIZE);
3236
3237 /* Adjust ring index. */
3238 ha->req_ring_index++;
3239 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3240 ha->req_ring_index = 0;
3241 ha->request_ring_ptr = ha->request_ring;
3242 } else
3243 ha->request_ring_ptr++;
3244
3245 /* Set chip new ring index. */
3246 dprintk(2, "qla1280_32bit_start_scsi: Wakeup RISC "
3247 "for pending command\n");
3248 sp->flags |= SRB_SENT;
3249 ha->actthreads++;
3250 WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
3251 /* Enforce mmio write ordering; see comment in qla1280_isp_cmd(). */
3252 mmiowb();
3253
3254out:
3255 if (status)
3256 dprintk(2, "qla1280_32bit_start_scsi: **** FAILED ****\n");
3257
3258 LEAVE("qla1280_32bit_start_scsi");
3259
3260 return status;
3261}
3262#endif
3263
3264/*
3265 * qla1280_req_pkt
3266 * Function is responsible for locking ring and
3267 * getting a zeroed out request packet.
3268 *
3269 * Input:
3270 * ha = adapter block pointer.
3271 *
3272 * Returns:
3273 * 0 = failed to get slot.
3274 */
3275static request_t *
3276qla1280_req_pkt(struct scsi_qla_host *ha)
3277{
3278 struct device_reg __iomem *reg = ha->iobase;
3279 request_t *pkt = NULL;
3280 int cnt;
3281 uint32_t timer;
3282
3283 ENTER("qla1280_req_pkt");
3284
3285 /*
3286 * This can be called from interrupt context, damn it!!!
3287 */
3288 /* Wait for 30 seconds for slot. */
3289 for (timer = 15000000; timer; timer--) {
3290 if (ha->req_q_cnt > 0) {
3291 /* Calculate number of free request entries. */
3292 cnt = RD_REG_WORD(&reg->mailbox4);
3293 if (ha->req_ring_index < cnt)
3294 ha->req_q_cnt = cnt - ha->req_ring_index;
3295 else
3296 ha->req_q_cnt =
3297 REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt);
3298 }
3299
3300 /* Found empty request ring slot? */
3301 if (ha->req_q_cnt > 0) {
3302 ha->req_q_cnt--;
3303 pkt = ha->request_ring_ptr;
3304
3305 /* Zero out packet. */
3306 memset(pkt, 0, REQUEST_ENTRY_SIZE);
3307
3308 /*
3309 * How can this be right when we have a ring
3310 * size of 512???
3311 */
3312 /* Set system defined field. */
3313 pkt->sys_define = (uint8_t) ha->req_ring_index;
3314
3315 /* Set entry count. */
3316 pkt->entry_count = 1;
3317
3318 break;
3319 }
3320
3321 udelay(2); /* 10 */
3322
3323 /* Check for pending interrupts. */
3324 qla1280_poll(ha);
3325 }
3326
3327 if (!pkt)
3328 dprintk(2, "qla1280_req_pkt: **** FAILED ****\n");
3329 else
3330 dprintk(3, "qla1280_req_pkt: exiting normally\n");
3331
3332 return pkt;
3333}
3334
3335/*
3336 * qla1280_isp_cmd
3337 * Function is responsible for modifying ISP input pointer.
3338 * Releases ring lock.
3339 *
3340 * Input:
3341 * ha = adapter block pointer.
3342 */
3343static void
3344qla1280_isp_cmd(struct scsi_qla_host *ha)
3345{
3346 struct device_reg __iomem *reg = ha->iobase;
3347
3348 ENTER("qla1280_isp_cmd");
3349
3350 dprintk(5, "qla1280_isp_cmd: IOCB data:\n");
3351 qla1280_dump_buffer(5, (char *)ha->request_ring_ptr,
3352 REQUEST_ENTRY_SIZE);
3353
3354 /* Adjust ring index. */
3355 ha->req_ring_index++;
3356 if (ha->req_ring_index == REQUEST_ENTRY_CNT) {
3357 ha->req_ring_index = 0;
3358 ha->request_ring_ptr = ha->request_ring;
3359 } else
3360 ha->request_ring_ptr++;
3361
3362 /*
3363 * Update request index to mailbox4 (Request Queue In).
3364 * The mmiowb() ensures that this write is ordered with writes by other
3365 * CPUs. Without the mmiowb(), it is possible for the following:
3366 * CPUA posts write of index 5 to mailbox4
3367 * CPUA releases host lock
3368 * CPUB acquires host lock
3369 * CPUB posts write of index 6 to mailbox4
3370 * On PCI bus, order reverses and write of 6 posts, then index 5,
3371 * causing chip to issue full queue of stale commands
3372 * The mmiowb() prevents future writes from crossing the barrier.
3373 * See Documentation/DocBook/deviceiobook.tmpl for more information.
3374 */
3375 WRT_REG_WORD(&reg->mailbox4, ha->req_ring_index);
3376 mmiowb();
3377
3378 LEAVE("qla1280_isp_cmd");
3379}
3380
3381/****************************************************************************/
3382/* Interrupt Service Routine. */
3383/****************************************************************************/
3384
3385/****************************************************************************
3386 * qla1280_isr
3387 * Calls I/O done on command completion.
3388 *
3389 * Input:
3390 * ha = adapter block pointer.
3391 * done_q = done queue.
3392 ****************************************************************************/
3393static void
3394qla1280_isr(struct scsi_qla_host *ha, struct list_head *done_q)
3395{
3396 struct device_reg __iomem *reg = ha->iobase;
3397 struct response *pkt;
3398 struct srb *sp = NULL;
3399 uint16_t mailbox[MAILBOX_REGISTER_COUNT];
3400 uint16_t *wptr;
3401 uint32_t index;
3402 u16 istatus;
3403
3404 ENTER("qla1280_isr");
3405
3406 istatus = RD_REG_WORD(&reg->istatus);
3407 if (!(istatus & (RISC_INT | PCI_INT)))
3408 return;
3409
3410 /* Save mailbox register 5 */
3411 mailbox[5] = RD_REG_WORD(&reg->mailbox5);
3412
3413 /* Check for mailbox interrupt. */
3414
3415 mailbox[0] = RD_REG_WORD_dmasync(&reg->semaphore);
3416
3417 if (mailbox[0] & BIT_0) {
3418 /* Get mailbox data. */
3419 /* dprintk(1, "qla1280_isr: In Get mailbox data \n"); */
3420
3421 wptr = &mailbox[0];
3422 *wptr++ = RD_REG_WORD(&reg->mailbox0);
3423 *wptr++ = RD_REG_WORD(&reg->mailbox1);
3424 *wptr = RD_REG_WORD(&reg->mailbox2);
3425 if (mailbox[0] != MBA_SCSI_COMPLETION) {
3426 wptr++;
3427 *wptr++ = RD_REG_WORD(&reg->mailbox3);
3428 *wptr++ = RD_REG_WORD(&reg->mailbox4);
3429 wptr++;
3430 *wptr++ = RD_REG_WORD(&reg->mailbox6);
3431 *wptr = RD_REG_WORD(&reg->mailbox7);
3432 }
3433
3434 /* Release mailbox registers. */
3435
3436 WRT_REG_WORD(&reg->semaphore, 0);
3437 WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
3438
3439 dprintk(5, "qla1280_isr: mailbox interrupt mailbox[0] = 0x%x",
3440 mailbox[0]);
3441
3442 /* Handle asynchronous event */
3443 switch (mailbox[0]) {
3444 case MBA_SCSI_COMPLETION: /* Response completion */
3445 dprintk(5, "qla1280_isr: mailbox SCSI response "
3446 "completion\n");
3447
3448 if (ha->flags.online) {
3449 /* Get outstanding command index. */
3450 index = mailbox[2] << 16 | mailbox[1];
3451
3452 /* Validate handle. */
3453 if (index < MAX_OUTSTANDING_COMMANDS)
3454 sp = ha->outstanding_cmds[index];
3455 else
3456 sp = NULL;
3457
3458 if (sp) {
3459 /* Free outstanding command slot. */
3460 ha->outstanding_cmds[index] = NULL;
3461
3462 /* Save ISP completion status */
3463 CMD_RESULT(sp->cmd) = 0;
3464
3465 /* Place block on done queue */
3466 list_add_tail(&sp->list, done_q);
3467 } else {
3468 /*
3469 * If we get here we have a real problem!
3470 */
3471 printk(KERN_WARNING
3472 "qla1280: ISP invalid handle");
3473 }
3474 }
3475 break;
3476
3477 case MBA_BUS_RESET: /* SCSI Bus Reset */
3478 ha->flags.reset_marker = 1;
3479 index = mailbox[6] & BIT_0;
3480 ha->bus_settings[index].reset_marker = 1;
3481
3482 printk(KERN_DEBUG "qla1280_isr(): index %i "
3483 "asynchronous BUS_RESET\n", index);
3484 break;
3485
3486 case MBA_SYSTEM_ERR: /* System Error */
3487 printk(KERN_WARNING
3488 "qla1280: ISP System Error - mbx1=%xh, mbx2="
3489 "%xh, mbx3=%xh\n", mailbox[1], mailbox[2],
3490 mailbox[3]);
3491 break;
3492
3493 case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */
3494 printk(KERN_WARNING
3495 "qla1280: ISP Request Transfer Error\n");
3496 break;
3497
3498 case MBA_RSP_TRANSFER_ERR: /* Response Transfer Error */
3499 printk(KERN_WARNING
3500 "qla1280: ISP Response Transfer Error\n");
3501 break;
3502
3503 case MBA_WAKEUP_THRES: /* Request Queue Wake-up */
3504 dprintk(2, "qla1280_isr: asynchronous WAKEUP_THRES\n");
3505 break;
3506
3507 case MBA_TIMEOUT_RESET: /* Execution Timeout Reset */
3508 dprintk(2,
3509 "qla1280_isr: asynchronous TIMEOUT_RESET\n");
3510 break;
3511
3512 case MBA_DEVICE_RESET: /* Bus Device Reset */
3513 printk(KERN_INFO "qla1280_isr(): asynchronous "
3514 "BUS_DEVICE_RESET\n");
3515
3516 ha->flags.reset_marker = 1;
3517 index = mailbox[6] & BIT_0;
3518 ha->bus_settings[index].reset_marker = 1;
3519 break;
3520
3521 case MBA_BUS_MODE_CHANGE:
3522 dprintk(2,
3523 "qla1280_isr: asynchronous BUS_MODE_CHANGE\n");
3524 break;
3525
3526 default:
3527 /* dprintk(1, "qla1280_isr: default case of switch MB \n"); */
3528 if (mailbox[0] < MBA_ASYNC_EVENT) {
3529 wptr = &mailbox[0];
3530 memcpy((uint16_t *) ha->mailbox_out, wptr,
3531 MAILBOX_REGISTER_COUNT *
3532 sizeof(uint16_t));
3533
3534 if(ha->mailbox_wait != NULL)
3535 complete(ha->mailbox_wait);
3536 }
3537 break;
3538 }
3539 } else {
3540 WRT_REG_WORD(&reg->host_cmd, HC_CLR_RISC_INT);
3541 }
3542
3543 /*
3544 * We will receive interrupts during mailbox testing prior to
3545 * the card being marked online, hence the double check.
3546 */
3547 if (!(ha->flags.online && !ha->mailbox_wait)) {
3548 dprintk(2, "qla1280_isr: Response pointer Error\n");
3549 goto out;
3550 }
3551
3552 if (mailbox[5] >= RESPONSE_ENTRY_CNT)
3553 goto out;
3554
3555 while (ha->rsp_ring_index != mailbox[5]) {
3556 pkt = ha->response_ring_ptr;
3557
3558 dprintk(5, "qla1280_isr: ha->rsp_ring_index = 0x%x, mailbox[5]"
3559 " = 0x%x\n", ha->rsp_ring_index, mailbox[5]);
3560 dprintk(5,"qla1280_isr: response packet data\n");
3561 qla1280_dump_buffer(5, (char *)pkt, RESPONSE_ENTRY_SIZE);
3562
3563 if (pkt->entry_type == STATUS_TYPE) {
3564 if ((le16_to_cpu(pkt->scsi_status) & 0xff)
3565 || pkt->comp_status || pkt->entry_status) {
3566 dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
3567 "0x%x mailbox[5] = 0x%x, comp_status "
3568 "= 0x%x, scsi_status = 0x%x\n",
3569 ha->rsp_ring_index, mailbox[5],
3570 le16_to_cpu(pkt->comp_status),
3571 le16_to_cpu(pkt->scsi_status));
3572 }
3573 } else {
3574 dprintk(2, "qla1280_isr: ha->rsp_ring_index = "
3575 "0x%x, mailbox[5] = 0x%x\n",
3576 ha->rsp_ring_index, mailbox[5]);
3577 dprintk(2, "qla1280_isr: response packet data\n");
3578 qla1280_dump_buffer(2, (char *)pkt,
3579 RESPONSE_ENTRY_SIZE);
3580 }
3581
3582 if (pkt->entry_type == STATUS_TYPE || pkt->entry_status) {
3583 dprintk(2, "status: Cmd %p, handle %i\n",
3584 ha->outstanding_cmds[pkt->handle]->cmd,
3585 pkt->handle);
3586 if (pkt->entry_type == STATUS_TYPE)
3587 qla1280_status_entry(ha, pkt, done_q);
3588 else
3589 qla1280_error_entry(ha, pkt, done_q);
3590 /* Adjust ring index. */
3591 ha->rsp_ring_index++;
3592 if (ha->rsp_ring_index == RESPONSE_ENTRY_CNT) {
3593 ha->rsp_ring_index = 0;
3594 ha->response_ring_ptr = ha->response_ring;
3595 } else
3596 ha->response_ring_ptr++;
3597 WRT_REG_WORD(&reg->mailbox5, ha->rsp_ring_index);
3598 }
3599 }
3600
3601 out:
3602 LEAVE("qla1280_isr");
3603}
3604
3605/*
3606 * qla1280_rst_aen
3607 * Processes asynchronous reset.
3608 *
3609 * Input:
3610 * ha = adapter block pointer.
3611 */
3612static void
3613qla1280_rst_aen(struct scsi_qla_host *ha)
3614{
3615 uint8_t bus;
3616
3617 ENTER("qla1280_rst_aen");
3618
3619 if (ha->flags.online && !ha->flags.reset_active &&
3620 !ha->flags.abort_isp_active) {
3621 ha->flags.reset_active = 1;
3622 while (ha->flags.reset_marker) {
3623 /* Issue marker command. */
3624 ha->flags.reset_marker = 0;
3625 for (bus = 0; bus < ha->ports &&
3626 !ha->flags.reset_marker; bus++) {
3627 if (ha->bus_settings[bus].reset_marker) {
3628 ha->bus_settings[bus].reset_marker = 0;
3629 qla1280_marker(ha, bus, 0, 0,
3630 MK_SYNC_ALL);
3631 }
3632 }
3633 }
3634 }
3635
3636 LEAVE("qla1280_rst_aen");
3637}
3638
3639
Linus Torvalds1da177e2005-04-16 15:20:36 -07003640/*
3641 * qla1280_status_entry
3642 * Processes received ISP status entry.
3643 *
3644 * Input:
3645 * ha = adapter block pointer.
3646 * pkt = entry pointer.
3647 * done_q = done queue.
3648 */
3649static void
3650qla1280_status_entry(struct scsi_qla_host *ha, struct response *pkt,
3651 struct list_head *done_q)
3652{
3653 unsigned int bus, target, lun;
3654 int sense_sz;
3655 struct srb *sp;
3656 struct scsi_cmnd *cmd;
3657 uint32_t handle = le32_to_cpu(pkt->handle);
3658 uint16_t scsi_status = le16_to_cpu(pkt->scsi_status);
3659 uint16_t comp_status = le16_to_cpu(pkt->comp_status);
3660
3661 ENTER("qla1280_status_entry");
3662
3663 /* Validate handle. */
3664 if (handle < MAX_OUTSTANDING_COMMANDS)
3665 sp = ha->outstanding_cmds[handle];
3666 else
3667 sp = NULL;
3668
3669 if (!sp) {
3670 printk(KERN_WARNING "qla1280: Status Entry invalid handle\n");
3671 goto out;
3672 }
3673
3674 /* Free outstanding command slot. */
3675 ha->outstanding_cmds[handle] = NULL;
3676
3677 cmd = sp->cmd;
3678
3679 /* Generate LU queue on cntrl, target, LUN */
3680 bus = SCSI_BUS_32(cmd);
3681 target = SCSI_TCN_32(cmd);
3682 lun = SCSI_LUN_32(cmd);
3683
3684 if (comp_status || scsi_status) {
3685 dprintk(3, "scsi: comp_status = 0x%x, scsi_status = "
3686 "0x%x, handle = 0x%x\n", comp_status,
3687 scsi_status, handle);
3688 }
3689
Jeremy Higdon 7d0e11f2005-05-01 05:18:48 -07003690 /* Target busy or queue full */
3691 if ((scsi_status & 0xFF) == SAM_STAT_TASK_SET_FULL ||
3692 (scsi_status & 0xFF) == SAM_STAT_BUSY) {
3693 CMD_RESULT(cmd) = scsi_status & 0xff;
Linus Torvalds1da177e2005-04-16 15:20:36 -07003694 } else {
3695
3696 /* Save ISP completion status */
3697 CMD_RESULT(cmd) = qla1280_return_status(pkt, cmd);
3698
Christoph Hellwig d6db3e8d2005-07-04 17:48:36 +02003699 if (scsi_status & SAM_STAT_CHECK_CONDITION) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07003700 if (comp_status != CS_ARS_FAILED) {
3701 uint16_t req_sense_length =
3702 le16_to_cpu(pkt->req_sense_length);
3703 if (req_sense_length < CMD_SNSLEN(cmd))
3704 sense_sz = req_sense_length;
3705 else
3706 /*
3707 * scsi_cmnd->sense_buffer is
3708 * 64 bytes, why only copy 63?
3709 * This looks wrong! /Jes
3710 */
3711 sense_sz = CMD_SNSLEN(cmd) - 1;
3712
3713 memcpy(cmd->sense_buffer,
3714 &pkt->req_sense_data, sense_sz);
3715 } else
3716 sense_sz = 0;
3717 memset(cmd->sense_buffer + sense_sz, 0,
FUJITA Tomonorib80ca4f2008-01-13 15:46:13 +09003718 SCSI_SENSE_BUFFERSIZE - sense_sz);
Linus Torvalds1da177e2005-04-16 15:20:36 -07003719
3720 dprintk(2, "qla1280_status_entry: Check "
3721 "condition Sense data, b %i, t %i, "
3722 "l %i\n", bus, target, lun);
3723 if (sense_sz)
3724 qla1280_dump_buffer(2,
3725 (char *)cmd->sense_buffer,
3726 sense_sz);
3727 }
3728 }
3729
3730 /* Place command on done queue. */
3731 list_add_tail(&sp->list, done_q);
3732 out:
3733 LEAVE("qla1280_status_entry");
3734}
3735
3736/*
3737 * qla1280_error_entry
3738 * Processes error entry.
3739 *
3740 * Input:
3741 * ha = adapter block pointer.
3742 * pkt = entry pointer.
3743 * done_q = done queue.
3744 */
3745static void
3746qla1280_error_entry(struct scsi_qla_host *ha, struct response *pkt,
3747 struct list_head *done_q)
3748{
3749 struct srb *sp;
3750 uint32_t handle = le32_to_cpu(pkt->handle);
3751
3752 ENTER("qla1280_error_entry");
3753
3754 if (pkt->entry_status & BIT_3)
3755 dprintk(2, "qla1280_error_entry: BAD PAYLOAD flag error\n");
3756 else if (pkt->entry_status & BIT_2)
3757 dprintk(2, "qla1280_error_entry: BAD HEADER flag error\n");
3758 else if (pkt->entry_status & BIT_1)
3759 dprintk(2, "qla1280_error_entry: FULL flag error\n");
3760 else
3761 dprintk(2, "qla1280_error_entry: UNKNOWN flag error\n");
3762
3763 /* Validate handle. */
3764 if (handle < MAX_OUTSTANDING_COMMANDS)
3765 sp = ha->outstanding_cmds[handle];
3766 else
3767 sp = NULL;
3768
3769 if (sp) {
3770 /* Free outstanding command slot. */
3771 ha->outstanding_cmds[handle] = NULL;
3772
3773 /* Bad payload or header */
3774 if (pkt->entry_status & (BIT_3 + BIT_2)) {
3775 /* Bad payload or header, set error status. */
3776 /* CMD_RESULT(sp->cmd) = CS_BAD_PAYLOAD; */
3777 CMD_RESULT(sp->cmd) = DID_ERROR << 16;
3778 } else if (pkt->entry_status & BIT_1) { /* FULL flag */
3779 CMD_RESULT(sp->cmd) = DID_BUS_BUSY << 16;
3780 } else {
3781 /* Set error status. */
3782 CMD_RESULT(sp->cmd) = DID_ERROR << 16;
3783 }
3784
3785 /* Place command on done queue. */
3786 list_add_tail(&sp->list, done_q);
3787 }
3788#ifdef QLA_64BIT_PTR
3789 else if (pkt->entry_type == COMMAND_A64_TYPE) {
3790 printk(KERN_WARNING "!qla1280: Error Entry invalid handle");
3791 }
3792#endif
3793
3794 LEAVE("qla1280_error_entry");
3795}
3796
3797/*
3798 * qla1280_abort_isp
3799 * Resets ISP and aborts all outstanding commands.
3800 *
3801 * Input:
3802 * ha = adapter block pointer.
3803 *
3804 * Returns:
3805 * 0 = success
3806 */
3807static int
3808qla1280_abort_isp(struct scsi_qla_host *ha)
3809{
3810 struct device_reg __iomem *reg = ha->iobase;
3811 struct srb *sp;
3812 int status = 0;
3813 int cnt;
3814 int bus;
3815
3816 ENTER("qla1280_abort_isp");
3817
3818 if (ha->flags.abort_isp_active || !ha->flags.online)
3819 goto out;
3820
3821 ha->flags.abort_isp_active = 1;
3822
3823 /* Disable ISP interrupts. */
3824 qla1280_disable_intrs(ha);
3825 WRT_REG_WORD(&reg->host_cmd, HC_PAUSE_RISC);
3826 RD_REG_WORD(&reg->id_l);
3827
3828 printk(KERN_INFO "scsi(%li): dequeuing outstanding commands\n",
3829 ha->host_no);
3830 /* Dequeue all commands in outstanding command list. */
3831 for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
3832 struct scsi_cmnd *cmd;
3833 sp = ha->outstanding_cmds[cnt];
3834 if (sp) {
3835
3836 cmd = sp->cmd;
3837 CMD_RESULT(cmd) = DID_RESET << 16;
3838
3839 sp->cmd = NULL;
3840 ha->outstanding_cmds[cnt] = NULL;
3841
3842 (*cmd->scsi_done)(cmd);
3843
3844 sp->flags = 0;
3845 }
3846 }
3847
3848 status = qla1280_load_firmware(ha);
3849 if (status)
3850 goto out;
3851
3852 /* Setup adapter based on NVRAM parameters. */
3853 qla1280_nvram_config (ha);
3854
3855 status = qla1280_init_rings(ha);
3856 if (status)
3857 goto out;
3858
3859 /* Issue SCSI reset. */
3860 for (bus = 0; bus < ha->ports; bus++)
3861 qla1280_bus_reset(ha, bus);
3862
3863 ha->flags.abort_isp_active = 0;
3864 out:
3865 if (status) {
3866 printk(KERN_WARNING
3867 "qla1280: ISP error recovery failed, board disabled");
3868 qla1280_reset_adapter(ha);
3869 dprintk(2, "qla1280_abort_isp: **** FAILED ****\n");
3870 }
3871
3872 LEAVE("qla1280_abort_isp");
3873 return status;
3874}
3875
3876
3877/*
3878 * qla1280_debounce_register
3879 * Debounce register.
3880 *
3881 * Input:
3882 * port = register address.
3883 *
3884 * Returns:
3885 * register value.
3886 */
3887static u16
3888qla1280_debounce_register(volatile u16 __iomem * addr)
3889{
3890 volatile u16 ret;
3891 volatile u16 ret2;
3892
3893 ret = RD_REG_WORD(addr);
3894 ret2 = RD_REG_WORD(addr);
3895
3896 if (ret == ret2)
3897 return ret;
3898
3899 do {
3900 cpu_relax();
3901 ret = RD_REG_WORD(addr);
3902 ret2 = RD_REG_WORD(addr);
3903 } while (ret != ret2);
3904
3905 return ret;
3906}
3907
3908
3909/************************************************************************
3910 * qla1280_check_for_dead_scsi_bus *
3911 * *
3912 * This routine checks for a dead SCSI bus *
3913 ************************************************************************/
3914#define SET_SXP_BANK 0x0100
3915#define SCSI_PHASE_INVALID 0x87FF
3916static int
3917qla1280_check_for_dead_scsi_bus(struct scsi_qla_host *ha, unsigned int bus)
3918{
3919 uint16_t config_reg, scsi_control;
3920 struct device_reg __iomem *reg = ha->iobase;
3921
3922 if (ha->bus_settings[bus].scsi_bus_dead) {
3923 WRT_REG_WORD(&reg->host_cmd, HC_PAUSE_RISC);
3924 config_reg = RD_REG_WORD(&reg->cfg_1);
3925 WRT_REG_WORD(&reg->cfg_1, SET_SXP_BANK);
3926 scsi_control = RD_REG_WORD(&reg->scsiControlPins);
3927 WRT_REG_WORD(&reg->cfg_1, config_reg);
3928 WRT_REG_WORD(&reg->host_cmd, HC_RELEASE_RISC);
3929
3930 if (scsi_control == SCSI_PHASE_INVALID) {
3931 ha->bus_settings[bus].scsi_bus_dead = 1;
3932#if 0
3933 CMD_RESULT(cp) = DID_NO_CONNECT << 16;
3934 CMD_HANDLE(cp) = INVALID_HANDLE;
3935 /* ha->actthreads--; */
3936
3937 (*(cp)->scsi_done)(cp);
3938#endif
3939 return 1; /* bus is dead */
3940 } else {
3941 ha->bus_settings[bus].scsi_bus_dead = 0;
3942 ha->bus_settings[bus].failed_reset_count = 0;
3943 }
3944 }
3945 return 0; /* bus is not dead */
3946}
3947
3948static void
3949qla1280_get_target_parameters(struct scsi_qla_host *ha,
3950 struct scsi_device *device)
3951{
3952 uint16_t mb[MAILBOX_REGISTER_COUNT];
3953 int bus, target, lun;
3954
3955 bus = device->channel;
3956 target = device->id;
3957 lun = device->lun;
3958
3959
3960 mb[0] = MBC_GET_TARGET_PARAMETERS;
3961 mb[1] = (uint16_t) (bus ? target | BIT_7 : target);
3962 mb[1] <<= 8;
3963 qla1280_mailbox_command(ha, BIT_6 | BIT_3 | BIT_2 | BIT_1 | BIT_0,
3964 &mb[0]);
3965
3966 printk(KERN_INFO "scsi(%li:%d:%d:%d):", ha->host_no, bus, target, lun);
3967
3968 if (mb[3] != 0) {
3969 printk(" Sync: period %d, offset %d",
3970 (mb[3] & 0xff), (mb[3] >> 8));
3971 if (mb[2] & BIT_13)
3972 printk(", Wide");
3973 if ((mb[2] & BIT_5) && ((mb[6] >> 8) & 0xff) >= 2)
3974 printk(", DT");
3975 } else
3976 printk(" Async");
3977
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05003978 if (device->simple_tags)
Linus Torvalds1da177e2005-04-16 15:20:36 -07003979 printk(", Tagged queuing: depth %d", device->queue_depth);
3980 printk("\n");
3981}
3982
3983
3984#if DEBUG_QLA1280
3985static void
3986__qla1280_dump_buffer(char *b, int size)
3987{
3988 int cnt;
3989 u8 c;
3990
3991 printk(KERN_DEBUG " 0 1 2 3 4 5 6 7 8 9 Ah "
3992 "Bh Ch Dh Eh Fh\n");
3993 printk(KERN_DEBUG "---------------------------------------------"
3994 "------------------\n");
3995
3996 for (cnt = 0; cnt < size;) {
3997 c = *b++;
3998
3999 printk("0x%02x", c);
4000 cnt++;
4001 if (!(cnt % 16))
4002 printk("\n");
4003 else
4004 printk(" ");
4005 }
4006 if (cnt % 16)
4007 printk("\n");
4008}
4009
4010/**************************************************************************
4011 * ql1280_print_scsi_cmd
4012 *
4013 **************************************************************************/
4014static void
4015__qla1280_print_scsi_cmd(struct scsi_cmnd *cmd)
4016{
4017 struct scsi_qla_host *ha;
4018 struct Scsi_Host *host = CMD_HOST(cmd);
4019 struct srb *sp;
4020 /* struct scatterlist *sg; */
4021
4022 int i;
4023 ha = (struct scsi_qla_host *)host->hostdata;
4024
4025 sp = (struct srb *)CMD_SP(cmd);
4026 printk("SCSI Command @= 0x%p, Handle=0x%p\n", cmd, CMD_HANDLE(cmd));
4027 printk(" chan=%d, target = 0x%02x, lun = 0x%02x, cmd_len = 0x%02x\n",
4028 SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd),
4029 CMD_CDBLEN(cmd));
4030 printk(" CDB = ");
4031 for (i = 0; i < cmd->cmd_len; i++) {
4032 printk("0x%02x ", cmd->cmnd[i]);
4033 }
Jes Sorensen5c1da582007-11-09 14:40:41 +01004034 printk(" seg_cnt =%d\n", scsi_sg_count(cmd));
Linus Torvalds1da177e2005-04-16 15:20:36 -07004035 printk(" request buffer=0x%p, request buffer len=0x%x\n",
Jes Sorensen5c1da582007-11-09 14:40:41 +01004036 scsi_sglist(cmd), scsi_bufflen(cmd));
Linus Torvalds1da177e2005-04-16 15:20:36 -07004037 /* if (cmd->use_sg)
4038 {
4039 sg = (struct scatterlist *) cmd->request_buffer;
4040 printk(" SG buffer: \n");
4041 qla1280_dump_buffer(1, (char *)sg, (cmd->use_sg*sizeof(struct scatterlist)));
4042 } */
4043 printk(" tag=%d, transfersize=0x%x \n",
4044 cmd->tag, cmd->transfersize);
Matthew Wilcox12a44162007-09-18 19:54:43 -06004045 printk(" Pid=%li, SP=0x%p\n", cmd->serial_number, CMD_SP(cmd));
Linus Torvalds1da177e2005-04-16 15:20:36 -07004046 printk(" underflow size = 0x%x, direction=0x%x\n",
4047 cmd->underflow, cmd->sc_data_direction);
4048}
4049
4050/**************************************************************************
4051 * ql1280_dump_device
4052 *
4053 **************************************************************************/
4054static void
4055ql1280_dump_device(struct scsi_qla_host *ha)
4056{
4057
4058 struct scsi_cmnd *cp;
4059 struct srb *sp;
4060 int i;
4061
4062 printk(KERN_DEBUG "Outstanding Commands on controller:\n");
4063
4064 for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
4065 if ((sp = ha->outstanding_cmds[i]) == NULL)
4066 continue;
4067 if ((cp = sp->cmd) == NULL)
4068 continue;
4069 qla1280_print_scsi_cmd(1, cp);
4070 }
4071}
4072#endif
4073
4074
4075enum tokens {
4076 TOKEN_NVRAM,
4077 TOKEN_SYNC,
4078 TOKEN_WIDE,
4079 TOKEN_PPR,
4080 TOKEN_VERBOSE,
4081 TOKEN_DEBUG,
4082};
4083
4084struct setup_tokens {
4085 char *token;
4086 int val;
4087};
4088
4089static struct setup_tokens setup_token[] __initdata =
4090{
4091 { "nvram", TOKEN_NVRAM },
4092 { "sync", TOKEN_SYNC },
4093 { "wide", TOKEN_WIDE },
4094 { "ppr", TOKEN_PPR },
4095 { "verbose", TOKEN_VERBOSE },
4096 { "debug", TOKEN_DEBUG },
4097};
4098
4099
4100/**************************************************************************
4101 * qla1280_setup
4102 *
4103 * Handle boot parameters. This really needs to be changed so one
4104 * can specify per adapter parameters.
4105 **************************************************************************/
4106static int __init
4107qla1280_setup(char *s)
4108{
4109 char *cp, *ptr;
4110 unsigned long val;
4111 int toke;
4112
4113 cp = s;
4114
4115 while (cp && (ptr = strchr(cp, ':'))) {
4116 ptr++;
4117 if (!strcmp(ptr, "yes")) {
4118 val = 0x10000;
4119 ptr += 3;
4120 } else if (!strcmp(ptr, "no")) {
4121 val = 0;
4122 ptr += 2;
4123 } else
4124 val = simple_strtoul(ptr, &ptr, 0);
4125
4126 switch ((toke = qla1280_get_token(cp))) {
4127 case TOKEN_NVRAM:
4128 if (!val)
4129 driver_setup.no_nvram = 1;
4130 break;
4131 case TOKEN_SYNC:
4132 if (!val)
4133 driver_setup.no_sync = 1;
4134 else if (val != 0x10000)
4135 driver_setup.sync_mask = val;
4136 break;
4137 case TOKEN_WIDE:
4138 if (!val)
4139 driver_setup.no_wide = 1;
4140 else if (val != 0x10000)
4141 driver_setup.wide_mask = val;
4142 break;
4143 case TOKEN_PPR:
4144 if (!val)
4145 driver_setup.no_ppr = 1;
4146 else if (val != 0x10000)
4147 driver_setup.ppr_mask = val;
4148 break;
4149 case TOKEN_VERBOSE:
4150 qla1280_verbose = val;
4151 break;
4152 default:
4153 printk(KERN_INFO "qla1280: unknown boot option %s\n",
4154 cp);
4155 }
4156
4157 cp = strchr(ptr, ';');
4158 if (cp)
4159 cp++;
4160 else {
4161 break;
4162 }
4163 }
4164 return 1;
4165}
4166
4167
Randy Dunlapf58f8312006-06-30 02:33:14 -07004168static int __init
Linus Torvalds1da177e2005-04-16 15:20:36 -07004169qla1280_get_token(char *str)
4170{
4171 char *sep;
4172 long ret = -1;
Tobias Klauser6391a112006-06-08 22:23:48 -07004173 int i;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004174
4175 sep = strchr(str, ':');
4176
4177 if (sep) {
Tobias Klauser6391a112006-06-08 22:23:48 -07004178 for (i = 0; i < ARRAY_SIZE(setup_token); i++) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07004179 if (!strncmp(setup_token[i].token, str, (sep - str))) {
4180 ret = setup_token[i].val;
4181 break;
4182 }
4183 }
4184 }
4185
4186 return ret;
4187}
4188
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05004189
Linus Torvalds1da177e2005-04-16 15:20:36 -07004190static struct scsi_host_template qla1280_driver_template = {
4191 .module = THIS_MODULE,
4192 .proc_name = "qla1280",
4193 .name = "Qlogic ISP 1280/12160",
4194 .info = qla1280_info,
4195 .slave_configure = qla1280_slave_configure,
4196 .queuecommand = qla1280_queuecommand,
4197 .eh_abort_handler = qla1280_eh_abort,
4198 .eh_device_reset_handler= qla1280_eh_device_reset,
4199 .eh_bus_reset_handler = qla1280_eh_bus_reset,
4200 .eh_host_reset_handler = qla1280_eh_adapter_reset,
4201 .bios_param = qla1280_biosparam,
4202 .can_queue = 0xfffff,
4203 .this_id = -1,
4204 .sg_tablesize = SG_ALL,
4205 .cmd_per_lun = 1,
4206 .use_clustering = ENABLE_CLUSTERING,
4207};
Jes Sorensen2dbb04c2006-01-16 11:49:29 -05004208
Linus Torvalds1da177e2005-04-16 15:20:36 -07004209
4210static int __devinit
4211qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
4212{
4213 int devnum = id->driver_data;
4214 struct qla_boards *bdp = &ql1280_board_tbl[devnum];
4215 struct Scsi_Host *host;
4216 struct scsi_qla_host *ha;
4217 int error = -ENODEV;
4218
4219 /* Bypass all AMI SUBSYS VENDOR IDs */
4220 if (pdev->subsystem_vendor == PCI_VENDOR_ID_AMI) {
4221 printk(KERN_INFO
4222 "qla1280: Skipping AMI SubSys Vendor ID Chip\n");
4223 goto error;
4224 }
4225
4226 printk(KERN_INFO "qla1280: %s found on PCI bus %i, dev %i\n",
4227 bdp->name, pdev->bus->number, PCI_SLOT(pdev->devfn));
4228
4229 if (pci_enable_device(pdev)) {
4230 printk(KERN_WARNING
4231 "qla1280: Failed to enabled pci device, aborting.\n");
4232 goto error;
4233 }
4234
4235 pci_set_master(pdev);
4236
4237 error = -ENOMEM;
4238 host = scsi_host_alloc(&qla1280_driver_template, sizeof(*ha));
4239 if (!host) {
4240 printk(KERN_WARNING
4241 "qla1280: Failed to register host, aborting.\n");
4242 goto error_disable_device;
4243 }
4244
4245 ha = (struct scsi_qla_host *)host->hostdata;
4246 memset(ha, 0, sizeof(struct scsi_qla_host));
4247
4248 ha->pdev = pdev;
4249 ha->devnum = devnum; /* specifies microcode load address */
4250
4251#ifdef QLA_64BIT_PTR
Matthias Kaehlckeb22c9d92007-04-17 09:58:36 +02004252 if (pci_set_dma_mask(ha->pdev, DMA_64BIT_MASK)) {
Matthias Gehre910638a2006-03-28 01:56:48 -08004253 if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07004254 printk(KERN_WARNING "scsi(%li): Unable to set a "
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02004255 "suitable DMA mask - aborting\n", ha->host_no);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004256 error = -ENODEV;
Johannes Dickgrebereb7a1692007-10-03 13:22:19 +02004257 goto error_put_host;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004258 }
4259 } else
4260 dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
4261 ha->host_no);
4262#else
Matthias Gehre910638a2006-03-28 01:56:48 -08004263 if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07004264 printk(KERN_WARNING "scsi(%li): Unable to set a "
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02004265 "suitable DMA mask - aborting\n", ha->host_no);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004266 error = -ENODEV;
Johannes Dickgrebereb7a1692007-10-03 13:22:19 +02004267 goto error_put_host;
Linus Torvalds1da177e2005-04-16 15:20:36 -07004268 }
4269#endif
4270
4271 ha->request_ring = pci_alloc_consistent(ha->pdev,
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02004272 ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)),
Linus Torvalds1da177e2005-04-16 15:20:36 -07004273 &ha->request_dma);
4274 if (!ha->request_ring) {
4275 printk(KERN_INFO "qla1280: Failed to get request memory\n");
4276 goto error_put_host;
4277 }
4278
4279 ha->response_ring = pci_alloc_consistent(ha->pdev,
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02004280 ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)),
Linus Torvalds1da177e2005-04-16 15:20:36 -07004281 &ha->response_dma);
4282 if (!ha->response_ring) {
4283 printk(KERN_INFO "qla1280: Failed to get response memory\n");
4284 goto error_free_request_ring;
4285 }
4286
4287 ha->ports = bdp->numPorts;
4288
4289 ha->host = host;
4290 ha->host_no = host->host_no;
4291
4292 host->irq = pdev->irq;
4293 host->max_channel = bdp->numPorts - 1;
4294 host->max_lun = MAX_LUNS - 1;
4295 host->max_id = MAX_TARGETS;
4296 host->max_sectors = 1024;
4297 host->unique_id = host->host_no;
4298
Linus Torvalds1da177e2005-04-16 15:20:36 -07004299 error = -ENODEV;
4300
4301#if MEMORY_MAPPED_IO
4302 ha->mmpbase = ioremap(pci_resource_start(ha->pdev, 1),
4303 pci_resource_len(ha->pdev, 1));
4304 if (!ha->mmpbase) {
4305 printk(KERN_INFO "qla1280: Unable to map I/O memory\n");
4306 goto error_free_response_ring;
4307 }
4308
4309 host->base = (unsigned long)ha->mmpbase;
4310 ha->iobase = (struct device_reg __iomem *)ha->mmpbase;
4311#else
4312 host->io_port = pci_resource_start(ha->pdev, 0);
4313 if (!request_region(host->io_port, 0xff, "qla1280")) {
4314 printk(KERN_INFO "qla1280: Failed to reserve i/o region "
4315 "0x%04lx-0x%04lx - already in use\n",
4316 host->io_port, host->io_port + 0xff);
4317 goto error_free_response_ring;
4318 }
4319
4320 ha->iobase = (struct device_reg *)host->io_port;
4321#endif
4322
4323 INIT_LIST_HEAD(&ha->done_q);
4324
4325 /* Disable ISP interrupts. */
4326 qla1280_disable_intrs(ha);
4327
Thomas Gleixner1d6f3592006-07-01 19:29:42 -07004328 if (request_irq(pdev->irq, qla1280_intr_handler, IRQF_SHARED,
Linus Torvalds1da177e2005-04-16 15:20:36 -07004329 "qla1280", ha)) {
4330 printk("qla1280 : Failed to reserve interrupt %d already "
4331 "in use\n", pdev->irq);
4332 goto error_release_region;
4333 }
4334
4335 /* load the F/W, read paramaters, and init the H/W */
4336 if (qla1280_initialize_adapter(ha)) {
4337 printk(KERN_INFO "qla1x160: Failed to initialize adapter\n");
4338 goto error_free_irq;
4339 }
4340
4341 /* set our host ID (need to do something about our two IDs) */
4342 host->this_id = ha->bus_settings[0].id;
4343
4344 pci_set_drvdata(pdev, host);
4345
Linus Torvalds1da177e2005-04-16 15:20:36 -07004346 error = scsi_add_host(host, &pdev->dev);
4347 if (error)
4348 goto error_disable_adapter;
4349 scsi_scan_host(host);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004350
4351 return 0;
4352
Linus Torvalds1da177e2005-04-16 15:20:36 -07004353 error_disable_adapter:
Christoph Hellwig 8af50dc2005-07-04 17:48:19 +02004354 qla1280_disable_intrs(ha);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004355 error_free_irq:
4356 free_irq(pdev->irq, ha);
4357 error_release_region:
4358#if MEMORY_MAPPED_IO
4359 iounmap(ha->mmpbase);
4360#else
4361 release_region(host->io_port, 0xff);
4362#endif
4363 error_free_response_ring:
4364 pci_free_consistent(ha->pdev,
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02004365 ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)),
Linus Torvalds1da177e2005-04-16 15:20:36 -07004366 ha->response_ring, ha->response_dma);
4367 error_free_request_ring:
4368 pci_free_consistent(ha->pdev,
Christoph Hellwig 2b55cac2005-07-04 17:48:30 +02004369 ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)),
Linus Torvalds1da177e2005-04-16 15:20:36 -07004370 ha->request_ring, ha->request_dma);
4371 error_put_host:
4372 scsi_host_put(host);
4373 error_disable_device:
4374 pci_disable_device(pdev);
4375 error:
4376 return error;
4377}
4378
4379
4380static void __devexit
4381qla1280_remove_one(struct pci_dev *pdev)
4382{
4383 struct Scsi_Host *host = pci_get_drvdata(pdev);
4384 struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
4385
Linus Torvalds1da177e2005-04-16 15:20:36 -07004386 scsi_remove_host(host);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004387
Christoph Hellwig 8af50dc2005-07-04 17:48:19 +02004388 qla1280_disable_intrs(ha);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004389
4390 free_irq(pdev->irq, ha);
4391
4392#if MEMORY_MAPPED_IO
4393 iounmap(ha->mmpbase);
4394#else
4395 release_region(host->io_port, 0xff);
4396#endif
4397
4398 pci_free_consistent(ha->pdev,
4399 ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))),
4400 ha->request_ring, ha->request_dma);
4401 pci_free_consistent(ha->pdev,
4402 ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))),
4403 ha->response_ring, ha->response_dma);
4404
4405 pci_disable_device(pdev);
4406
4407 scsi_host_put(host);
4408}
4409
Linus Torvalds1da177e2005-04-16 15:20:36 -07004410static struct pci_driver qla1280_pci_driver = {
4411 .name = "qla1280",
4412 .id_table = qla1280_pci_tbl,
4413 .probe = qla1280_probe_one,
4414 .remove = __devexit_p(qla1280_remove_one),
4415};
4416
4417static int __init
4418qla1280_init(void)
4419{
4420 if (sizeof(struct srb) > sizeof(struct scsi_pointer)) {
4421 printk(KERN_WARNING
4422 "qla1280: struct srb too big, aborting\n");
4423 return -EINVAL;
4424 }
4425
4426#ifdef MODULE
4427 /*
4428 * If we are called as a module, the qla1280 pointer may not be null
4429 * and it would point to our bootup string, just like on the lilo
4430 * command line. IF not NULL, then process this config string with
4431 * qla1280_setup
4432 *
4433 * Boot time Options
4434 * To add options at boot time add a line to your lilo.conf file like:
4435 * append="qla1280=verbose,max_tags:{{255,255,255,255},{255,255,255,255}}"
4436 * which will result in the first four devices on the first two
4437 * controllers being set to a tagged queue depth of 32.
4438 */
4439 if (qla1280)
4440 qla1280_setup(qla1280);
4441#endif
4442
Henrik Kretzschmardcbccbde2006-09-25 16:58:58 -07004443 return pci_register_driver(&qla1280_pci_driver);
Linus Torvalds1da177e2005-04-16 15:20:36 -07004444}
4445
4446static void __exit
4447qla1280_exit(void)
4448{
4449 pci_unregister_driver(&qla1280_pci_driver);
4450}
4451
4452module_init(qla1280_init);
4453module_exit(qla1280_exit);
4454
Linus Torvalds1da177e2005-04-16 15:20:36 -07004455
4456MODULE_AUTHOR("Qlogic & Jes Sorensen");
4457MODULE_DESCRIPTION("Qlogic ISP SCSI (qla1x80/qla1x160) driver");
4458MODULE_LICENSE("GPL");
4459MODULE_VERSION(QLA1280_VERSION);
4460
4461/*
4462 * Overrides for Emacs so that we almost follow Linus's tabbing style.
4463 * Emacs will notice this stuff at the end of the file and automatically
4464 * adjust the settings for this buffer only. This must remain at the end
4465 * of the file.
4466 * ---------------------------------------------------------------------------
4467 * Local variables:
4468 * c-basic-offset: 8
4469 * tab-width: 8
4470 * End:
4471 */