Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 1 | /* |
| 2 | * linux/drivers/pcmcia/pxa2xx_trizeps4.c |
| 3 | * |
| 4 | * TRIZEPS PCMCIA specific routines. |
| 5 | * |
| 6 | * Author: Jürgen Schindele |
| 7 | * Created: 20 02, 2006 |
| 8 | * Copyright: Jürgen Schindele |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify |
| 11 | * it under the terms of the GNU General Public License version 2 as |
| 12 | * published by the Free Software Foundation. |
| 13 | */ |
| 14 | |
| 15 | #include <linux/module.h> |
| 16 | #include <linux/init.h> |
| 17 | #include <linux/kernel.h> |
| 18 | #include <linux/gpio.h> |
| 19 | #include <linux/interrupt.h> |
| 20 | #include <linux/platform_device.h> |
| 21 | |
| 22 | #include <asm/mach-types.h> |
| 23 | #include <asm/irq.h> |
| 24 | |
Eric Miao | b74d196 | 2009-01-20 10:31:55 +0800 | [diff] [blame] | 25 | #include <mach/pxa2xx-regs.h> |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 26 | #include <mach/trizeps4.h> |
| 27 | |
| 28 | #include "soc_common.h" |
| 29 | |
| 30 | extern void board_pcmcia_power(int power); |
| 31 | |
| 32 | static struct pcmcia_irqs irqs[] = { |
| 33 | { 0, IRQ_GPIO(GPIO_PCD), "cs0_cd" } |
| 34 | /* on other baseboards we can have more inputs */ |
| 35 | }; |
| 36 | |
| 37 | static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt) |
| 38 | { |
| 39 | int ret, i; |
| 40 | /* we dont have voltage/card/ready detection |
| 41 | * so we dont need interrupts for it |
| 42 | */ |
| 43 | switch (skt->nr) { |
| 44 | case 0: |
| 45 | if (gpio_request(GPIO_PRDY, "cf_irq") < 0) { |
| 46 | pr_err("%s: sock %d unable to request gpio %d\n", __func__, |
| 47 | skt->nr, GPIO_PRDY); |
| 48 | return -EBUSY; |
| 49 | } |
| 50 | if (gpio_direction_input(GPIO_PRDY) < 0) { |
| 51 | pr_err("%s: sock %d unable to set input gpio %d\n", __func__, |
| 52 | skt->nr, GPIO_PRDY); |
| 53 | gpio_free(GPIO_PRDY); |
| 54 | return -EINVAL; |
| 55 | } |
Russell King - ARM Linux | 66024db | 2009-03-29 22:45:26 +0100 | [diff] [blame] | 56 | skt->socket.pci_irq = IRQ_GPIO(GPIO_PRDY); |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 57 | break; |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 58 | default: |
| 59 | break; |
| 60 | } |
| 61 | /* release the reset of this card */ |
Russell King - ARM Linux | 66024db | 2009-03-29 22:45:26 +0100 | [diff] [blame] | 62 | pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq); |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 63 | |
| 64 | /* supplementory irqs for the socket */ |
| 65 | for (i = 0; i < ARRAY_SIZE(irqs); i++) { |
| 66 | if (irqs[i].sock != skt->nr) |
| 67 | continue; |
Eric Miao | 7db6a7f | 2011-04-12 18:39:39 +0800 | [diff] [blame] | 68 | if (gpio_request(irq_to_gpio(irqs[i].irq), irqs[i].str) < 0) { |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 69 | pr_err("%s: sock %d unable to request gpio %d\n", |
Eric Miao | 7db6a7f | 2011-04-12 18:39:39 +0800 | [diff] [blame] | 70 | __func__, skt->nr, irq_to_gpio(irqs[i].irq)); |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 71 | ret = -EBUSY; |
| 72 | goto error; |
| 73 | } |
Eric Miao | 7db6a7f | 2011-04-12 18:39:39 +0800 | [diff] [blame] | 74 | if (gpio_direction_input(irq_to_gpio(irqs[i].irq)) < 0) { |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 75 | pr_err("%s: sock %d unable to set input gpio %d\n", |
Eric Miao | 7db6a7f | 2011-04-12 18:39:39 +0800 | [diff] [blame] | 76 | __func__, skt->nr, irq_to_gpio(irqs[i].irq)); |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 77 | ret = -EINVAL; |
| 78 | goto error; |
| 79 | } |
| 80 | } |
| 81 | return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
| 82 | |
| 83 | error: |
| 84 | for (; i >= 0; i--) { |
Eric Miao | 7db6a7f | 2011-04-12 18:39:39 +0800 | [diff] [blame] | 85 | gpio_free(irq_to_gpio(irqs[i].irq)); |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 86 | } |
| 87 | return (ret); |
| 88 | } |
| 89 | |
| 90 | static void trizeps_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) |
| 91 | { |
| 92 | int i; |
| 93 | /* free allocated gpio's */ |
| 94 | gpio_free(GPIO_PRDY); |
| 95 | for (i = 0; i < ARRAY_SIZE(irqs); i++) |
Eric Miao | 7db6a7f | 2011-04-12 18:39:39 +0800 | [diff] [blame] | 96 | gpio_free(irq_to_gpio(irqs[i].irq)); |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 97 | } |
| 98 | |
| 99 | static unsigned long trizeps_pcmcia_status[2]; |
| 100 | |
| 101 | static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt, |
| 102 | struct pcmcia_state *state) |
| 103 | { |
| 104 | unsigned short status = 0, change; |
| 105 | status = CFSR_readw(); |
| 106 | change = (status ^ trizeps_pcmcia_status[skt->nr]) & |
| 107 | ConXS_CFSR_BVD_MASK; |
| 108 | if (change) { |
| 109 | trizeps_pcmcia_status[skt->nr] = status; |
| 110 | if (status & ConXS_CFSR_BVD1) { |
| 111 | /* enable_irq empty */ |
| 112 | } else { |
| 113 | /* disable_irq empty */ |
| 114 | } |
| 115 | } |
| 116 | |
| 117 | switch (skt->nr) { |
| 118 | case 0: |
| 119 | /* just fill in fix states */ |
| 120 | state->detect = gpio_get_value(GPIO_PCD) ? 0 : 1; |
| 121 | state->ready = gpio_get_value(GPIO_PRDY) ? 1 : 0; |
| 122 | state->bvd1 = (status & ConXS_CFSR_BVD1) ? 1 : 0; |
| 123 | state->bvd2 = (status & ConXS_CFSR_BVD2) ? 1 : 0; |
| 124 | state->vs_3v = (status & ConXS_CFSR_VS1) ? 0 : 1; |
| 125 | state->vs_Xv = (status & ConXS_CFSR_VS2) ? 0 : 1; |
| 126 | state->wrprot = 0; /* not available */ |
| 127 | break; |
| 128 | |
| 129 | #ifndef CONFIG_MACH_TRIZEPS_CONXS |
| 130 | /* on ConXS we only have one slot. Second is inactive */ |
| 131 | case 1: |
| 132 | state->detect = 0; |
| 133 | state->ready = 0; |
| 134 | state->bvd1 = 0; |
| 135 | state->bvd2 = 0; |
| 136 | state->vs_3v = 0; |
| 137 | state->vs_Xv = 0; |
| 138 | state->wrprot = 0; |
| 139 | break; |
| 140 | |
| 141 | #endif |
| 142 | } |
| 143 | } |
| 144 | |
| 145 | static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, |
| 146 | const socket_state_t *state) |
| 147 | { |
| 148 | int ret = 0; |
| 149 | unsigned short power = 0; |
| 150 | |
| 151 | /* we do nothing here just check a bit */ |
| 152 | switch (state->Vcc) { |
| 153 | case 0: power &= 0xfc; break; |
| 154 | case 33: power |= ConXS_BCR_S0_VCC_3V3; break; |
| 155 | case 50: |
| 156 | pr_err("%s(): Vcc 5V not supported in socket\n", __func__); |
| 157 | break; |
| 158 | default: |
| 159 | pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc); |
| 160 | ret = -1; |
| 161 | } |
| 162 | |
| 163 | switch (state->Vpp) { |
| 164 | case 0: power &= 0xf3; break; |
| 165 | case 33: power |= ConXS_BCR_S0_VPP_3V3; break; |
| 166 | case 120: |
| 167 | pr_err("%s(): Vpp 12V not supported in socket\n", __func__); |
| 168 | break; |
| 169 | default: |
| 170 | if (state->Vpp != state->Vcc) { |
| 171 | pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp); |
| 172 | ret = -1; |
| 173 | } |
| 174 | } |
| 175 | |
| 176 | switch (skt->nr) { |
| 177 | case 0: /* we only have 3.3V */ |
| 178 | board_pcmcia_power(power); |
| 179 | break; |
| 180 | |
| 181 | #ifndef CONFIG_MACH_TRIZEPS_CONXS |
| 182 | /* on ConXS we only have one slot. Second is inactive */ |
| 183 | case 1: |
| 184 | #endif |
| 185 | default: |
| 186 | break; |
| 187 | } |
| 188 | |
| 189 | return ret; |
| 190 | } |
| 191 | |
| 192 | static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt) |
| 193 | { |
| 194 | /* default is on */ |
| 195 | board_pcmcia_power(0x9); |
| 196 | } |
| 197 | |
| 198 | static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) |
| 199 | { |
| 200 | board_pcmcia_power(0x0); |
| 201 | } |
| 202 | |
| 203 | static struct pcmcia_low_level trizeps_pcmcia_ops = { |
| 204 | .owner = THIS_MODULE, |
| 205 | .hw_init = trizeps_pcmcia_hw_init, |
| 206 | .hw_shutdown = trizeps_pcmcia_hw_shutdown, |
| 207 | .socket_state = trizeps_pcmcia_socket_state, |
| 208 | .configure_socket = trizeps_pcmcia_configure_socket, |
| 209 | .socket_init = trizeps_pcmcia_socket_init, |
| 210 | .socket_suspend = trizeps_pcmcia_socket_suspend, |
| 211 | #ifdef CONFIG_MACH_TRIZEPS_CONXS |
| 212 | .nr = 1, |
| 213 | #else |
| 214 | .nr = 2, |
| 215 | #endif |
| 216 | .first = 0, |
| 217 | }; |
| 218 | |
| 219 | static struct platform_device *trizeps_pcmcia_device; |
| 220 | |
| 221 | static int __init trizeps_pcmcia_init(void) |
| 222 | { |
| 223 | int ret; |
| 224 | |
Dmitry Eremin-Solenikov | 735443f | 2011-04-01 13:28:46 +0400 | [diff] [blame] | 225 | if (!machine_is_trizeps4() && !machine_is_trizeps4wl()) |
| 226 | return -ENODEV; |
| 227 | |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 228 | trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); |
| 229 | if (!trizeps_pcmcia_device) |
| 230 | return -ENOMEM; |
| 231 | |
| 232 | ret = platform_device_add_data(trizeps_pcmcia_device, |
| 233 | &trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops)); |
| 234 | |
| 235 | if (ret == 0) |
| 236 | ret = platform_device_add(trizeps_pcmcia_device); |
| 237 | |
| 238 | if (ret) |
| 239 | platform_device_put(trizeps_pcmcia_device); |
| 240 | |
| 241 | return ret; |
| 242 | } |
| 243 | |
| 244 | static void __exit trizeps_pcmcia_exit(void) |
| 245 | { |
Jürgen Schindele | 2efa42f | 2008-10-07 10:40:18 +0100 | [diff] [blame] | 246 | platform_device_unregister(trizeps_pcmcia_device); |
| 247 | } |
| 248 | |
| 249 | fs_initcall(trizeps_pcmcia_init); |
| 250 | module_exit(trizeps_pcmcia_exit); |
| 251 | |
| 252 | MODULE_LICENSE("GPL"); |
| 253 | MODULE_AUTHOR("Juergen Schindele"); |
| 254 | MODULE_ALIAS("platform:pxa2xx-pcmcia"); |