drivers/block/drbd/drbd_req.h

/*
   drbd_req.h

   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.

   Copyright (C) 2006-2008, LINBIT Information Technologies GmbH.
   Copyright (C) 2006-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
   Copyright (C) 2006-2008, Philipp Reisner <philipp.reisner@linbit.com>.

   DRBD is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2, or (at your option)
   any later version.

   DRBD is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with drbd; see the file COPYING.  If not, write to
   the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#ifndef _DRBD_REQ_H
#define _DRBD_REQ_H

#include <linux/module.h>

#include <linux/slab.h>
#include <linux/drbd.h>
#include "drbd_int.h"
#include "drbd_wrappers.h"

/* The request callbacks will be called in irq context by the IDE drivers,
   and in Softirqs/Tasklets/BH context by the SCSI drivers,
   and by the receiver and worker in kernel-thread context.
   Try to get the locking right :) */

/*
 * Objects of type struct drbd_request do only exist on a R_PRIMARY node, and are
 * associated with IO requests originating from the block layer above us.
 *
 * There are quite a few things that may happen to a drbd request
 * during its lifetime.
 *
 *  It will be created.
 *  It will be marked with the intention to be
 *    submitted to local disk and/or
 *    send via the network.
 *
 *  It has to be placed on the transfer log and other housekeeping lists,
 *  In case we have a network connection.
 *
 *  It may be identified as a concurrent (write) request
 *    and be handled accordingly.
 *
 *  It may me handed over to the local disk subsystem.
 *  It may be completed by the local disk subsystem,
 *    either successfully or with io-error.
 *  In case it is a READ request, and it failed locally,
 *    it may be retried remotely.
 *
 *  It may be queued for sending.
 *  It may be handed over to the network stack,
 *    which may fail.
 *  It may be acknowledged by the "peer" according to the wire_protocol in use.
 *    this may be a negative ack.
 *  It may receive a faked ack when the network connection is lost and the
 *  transfer log is cleaned up.
 *  Sending may be canceled due to network connection loss.
 *  When it finally has outlived its time,
 *    corresponding dirty bits in the resync-bitmap may be cleared or set,
 *    it will be destroyed,
 *    and completion will be signalled to the originator,
 *      with or without "success".
 */

enum drbd_req_event {
	created,
	to_be_send,
	to_be_submitted,

	/* XXX yes, now I am inconsistent...
	 * these are not "events" but "actions"
	 * oh, well... */
	queue_for_net_write,
	queue_for_net_read,
	queue_for_send_oos,

	send_canceled,
	send_failed,
	handed_over_to_network,
	oos_handed_to_network,
	connection_lost_while_pending,
	read_retry_remote_canceled,
	recv_acked_by_peer,
	write_acked_by_peer,
	write_acked_by_peer_and_sis, /* and set_in_sync */
	conflict_discarded_by_peer,
	neg_acked,
	barrier_acked, /* in protocol A and B */
	data_received, /* (remote read) */

	read_completed_with_error,
	read_ahead_completed_with_error,
	write_completed_with_error,
	abort_disk_io,
	completed_ok,
	resend,
	fail_frozen_disk_io,
	restart_frozen_disk_io,
	nothing, /* for tracing only */
};

/* encoding of request states for now.  we don't actually need that many bits.
 * we don't need to do atomic bit operations either, since most of the time we
 * need to look at the connection state and/or manipulate some lists at the
 * same time, so we should hold the request lock anyways.
 */
enum drbd_req_state_bits {
	/* 3210
	 * 0000: no local possible
	 * 0001: to be submitted
	 *    UNUSED, we could map: 011: submitted, completion still pending
	 * 0110: completed ok
	 * 0010: completed with error
	 * 1001: Aborted (before completion)
	 * 1x10: Aborted and completed -> free
	 */
	__RQ_LOCAL_PENDING,
	__RQ_LOCAL_COMPLETED,
	__RQ_LOCAL_OK,
	__RQ_LOCAL_ABORTED,

	/* 87654
	 * 00000: no network possible
	 * 00001: to be send
	 * 00011: to be send, on worker queue
	 * 00101: sent, expecting recv_ack (B) or write_ack (C)
	 * 11101: sent,
	 *        recv_ack (B) or implicit "ack" (A),
	 *        still waiting for the barrier ack.
	 *        master_bio may already be completed and invalidated.
	 * 11100: write_acked (C),
	 *        data_received (for remote read, any protocol)
	 *        or finally the barrier ack has arrived (B,A)...
	 *        request can be freed
	 * 01100: neg-acked (write, protocol C)
	 *        or neg-d-acked (read, any protocol)
	 *        or killed from the transfer log
	 *        during cleanup after connection loss
	 *        request can be freed
	 * 01000: canceled or send failed...
	 *        request can be freed
	 */

	/* if "SENT" is not set, yet, this can still fail or be canceled.
	 * if "SENT" is set already, we still wait for an Ack packet.
	 * when cleared, the master_bio may be completed.
	 * in (B,A) the request object may still linger on the transaction log
	 * until the corresponding barrier ack comes in */
	__RQ_NET_PENDING,

	/* If it is QUEUED, and it is a WRITE, it is also registered in the
	 * transfer log. Currently we need this flag to avoid conflicts between
	 * worker canceling the request and tl_clear_barrier killing it from
	 * transfer log.  We should restructure the code so this conflict does
	 * no longer occur. */
	__RQ_NET_QUEUED,

	/* well, actually only "handed over to the network stack".
	 *
	 * TODO can potentially be dropped because of the similar meaning
	 * of RQ_NET_SENT and ~RQ_NET_QUEUED.
	 * however it is not exactly the same. before we drop it
	 * we must ensure that we can tell a request with network part
	 * from a request without, regardless of what happens to it. */
	__RQ_NET_SENT,

	/* when set, the request may be freed (if RQ_NET_QUEUED is clear).
	 * basically this means the corresponding P_BARRIER_ACK was received */
	__RQ_NET_DONE,

	/* whether or not we know (C) or pretend (B,A) that the write
	 * was successfully written on the peer.
	 */
	__RQ_NET_OK,

	/* peer called drbd_set_in_sync() for this write */
	__RQ_NET_SIS,

	/* keep this last, its for the RQ_NET_MASK */
	__RQ_NET_MAX,

	/* Set when this is a write, clear for a read */
	__RQ_WRITE,

	/* Should call drbd_al_complete_io() for this request... */
	__RQ_IN_ACT_LOG,
};

#define RQ_LOCAL_PENDING   (1UL << __RQ_LOCAL_PENDING)
#define RQ_LOCAL_COMPLETED (1UL << __RQ_LOCAL_COMPLETED)
#define RQ_LOCAL_OK        (1UL << __RQ_LOCAL_OK)
#define RQ_LOCAL_ABORTED   (1UL << __RQ_LOCAL_ABORTED)

#define RQ_LOCAL_MASK      ((RQ_LOCAL_ABORTED << 1)-1)

#define RQ_NET_PENDING     (1UL << __RQ_NET_PENDING)
#define RQ_NET_QUEUED      (1UL << __RQ_NET_QUEUED)
#define RQ_NET_SENT        (1UL << __RQ_NET_SENT)
#define RQ_NET_DONE        (1UL << __RQ_NET_DONE)
#define RQ_NET_OK          (1UL << __RQ_NET_OK)
#define RQ_NET_SIS         (1UL << __RQ_NET_SIS)

/* 0x1f8 */
#define RQ_NET_MASK        (((1UL << __RQ_NET_MAX)-1) & ~RQ_LOCAL_MASK)

#define RQ_WRITE           (1UL << __RQ_WRITE)
#define RQ_IN_ACT_LOG      (1UL << __RQ_IN_ACT_LOG)

/* For waking up the frozen transfer log mod_req() has to return if the request
   should be counted in the epoch object*/
#define MR_WRITE_SHIFT 0
#define MR_WRITE       (1 << MR_WRITE_SHIFT)
#define MR_READ_SHIFT  1
#define MR_READ        (1 << MR_READ_SHIFT)

/* epoch entries */
static inline
struct hlist_head *ee_hash_slot(struct drbd_conf *mdev, sector_t sector)
{
	BUG_ON(mdev->ee_hash_s == 0);
	return mdev->ee_hash +
		((unsigned int)(sector>>HT_SHIFT) % mdev->ee_hash_s);
}

/* transfer log (drbd_request objects) */
static inline
struct hlist_head *tl_hash_slot(struct drbd_conf *mdev, sector_t sector)
{
	BUG_ON(mdev->tl_hash_s == 0);
	return mdev->tl_hash +
		((unsigned int)(sector>>HT_SHIFT) % mdev->tl_hash_s);
}

/* application reads (drbd_request objects) */
static struct hlist_head *ar_hash_slot(struct drbd_conf *mdev, sector_t sector)
{
	return mdev->app_reads_hash
		+ ((unsigned int)(sector) % APP_R_HSIZE);
}

/* when we receive the answer for a read request,
 * verify that we actually know about it */
static inline struct drbd_request *_ar_id_to_req(struct drbd_conf *mdev,
	u64 id, sector_t sector)
{
	struct hlist_head *slot = ar_hash_slot(mdev, sector);
	struct hlist_node *n;
	struct drbd_request *req;

	hlist_for_each_entry(req, n, slot, collision) {
		if ((unsigned long)req == (unsigned long)id) {
			D_ASSERT(req->sector == sector);
			return req;
		}
	}
	return NULL;
}

static inline void drbd_req_make_private_bio(struct drbd_request *req, struct bio *bio_src)
{
	struct bio *bio;
	bio = bio_clone(bio_src, GFP_NOIO); /* XXX cannot fail?? */

	req->private_bio = bio;

	bio->bi_private  = req;
	bio->bi_end_io   = drbd_endio_pri;
	bio->bi_next     = NULL;
}

static inline struct drbd_request *drbd_req_new(struct drbd_conf *mdev,
	struct bio *bio_src)
{
	struct drbd_request *req =
		mempool_alloc(drbd_request_mempool, GFP_NOIO);
	if (likely(req)) {
		drbd_req_make_private_bio(req, bio_src);

		req->rq_state    = bio_data_dir(bio_src) == WRITE ? RQ_WRITE : 0;
		req->mdev        = mdev;
		req->master_bio  = bio_src;
		req->epoch       = 0;
		req->sector      = bio_src->bi_sector;
		req->size        = bio_src->bi_size;
		INIT_HLIST_NODE(&req->collision);
		INIT_LIST_HEAD(&req->tl_requests);
		INIT_LIST_HEAD(&req->w.list);
	}
	return req;
}

static inline void drbd_req_free(struct drbd_request *req)
{
	mempool_free(req, drbd_request_mempool);
}

static inline int overlaps(sector_t s1, int l1, sector_t s2, int l2)
{
	return !((s1 + (l1>>9) <= s2) || (s1 >= s2 + (l2>>9)));
}

/* Short lived temporary struct on the stack.
 * We could squirrel the error to be returned into
 * bio->bi_size, or similar. But that would be too ugly. */
struct bio_and_error {
	struct bio *bio;
	int error;
};

extern void _req_may_be_done(struct drbd_request *req,
		struct bio_and_error *m);
extern int __req_mod(struct drbd_request *req, enum drbd_req_event what,
		struct bio_and_error *m);
extern void complete_master_bio(struct drbd_conf *mdev,
		struct bio_and_error *m);
extern void request_timer_fn(unsigned long data);
extern void tl_restart(struct drbd_conf *mdev, enum drbd_req_event what);

/* use this if you don't want to deal with calling complete_master_bio()
 * outside the spinlock, e.g. when walking some list on cleanup. */
static inline int _req_mod(struct drbd_request *req, enum drbd_req_event what)
{
	struct drbd_conf *mdev = req->mdev;
	struct bio_and_error m;
	int rv;

	/* __req_mod possibly frees req, do not touch req after that! */
	rv = __req_mod(req, what, &m);
	if (m.bio)
		complete_master_bio(mdev, &m);

	return rv;
}

/* completion of master bio is outside of our spinlock.
 * We still may or may not be inside some irqs disabled section
 * of the lower level driver completion callback, so we need to
 * spin_lock_irqsave here. */
static inline int req_mod(struct drbd_request *req,
		enum drbd_req_event what)
{
	unsigned long flags;
	struct drbd_conf *mdev = req->mdev;
	struct bio_and_error m;
	int rv;

	spin_lock_irqsave(&mdev->req_lock, flags);
	rv = __req_mod(req, what, &m);
	spin_unlock_irqrestore(&mdev->req_lock, flags);

	if (m.bio)
		complete_master_bio(mdev, &m);

	return rv;
}

static inline bool drbd_should_do_remote(union drbd_state s)
{
	return s.pdsk == D_UP_TO_DATE ||
		(s.pdsk >= D_INCONSISTENT &&
		 s.conn >= C_WF_BITMAP_T &&
		 s.conn < C_AHEAD);
	/* Before proto 96 that was >= CONNECTED instead of >= C_WF_BITMAP_T.
	   That is equivalent since before 96 IO was frozen in the C_WF_BITMAP*
	   states. */
}
static inline bool drbd_should_send_oos(union drbd_state s)
{
	return s.conn == C_AHEAD || s.conn == C_WF_BITMAP_S;
	/* pdsk = D_INCONSISTENT as a consequence. Protocol 96 check not necessary
	   since we enter state C_AHEAD only if proto >= 96 */
}

#endif