Cyril Chemparathy | f20136e | 2010-09-15 10:11:21 -0400 | [diff] [blame] | 1 | /* |
| 2 | * DaVinci MDIO Module driver |
| 3 | * |
| 4 | * Copyright (C) 2010 Texas Instruments. |
| 5 | * |
| 6 | * Shamelessly ripped out of davinci_emac.c, original copyrights follow: |
| 7 | * |
| 8 | * Copyright (C) 2009 Texas Instruments. |
| 9 | * |
| 10 | * --------------------------------------------------------------------------- |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or modify |
| 13 | * it under the terms of the GNU General Public License as published by |
| 14 | * the Free Software Foundation; either version 2 of the License, or |
| 15 | * (at your option) any later version. |
| 16 | * |
| 17 | * This program is distributed in the hope that it will be useful, |
| 18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 20 | * GNU General Public License for more details. |
| 21 | * |
| 22 | * You should have received a copy of the GNU General Public License |
| 23 | * along with this program; if not, write to the Free Software |
| 24 | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 25 | * --------------------------------------------------------------------------- |
| 26 | */ |
| 27 | #include <linux/module.h> |
| 28 | #include <linux/kernel.h> |
| 29 | #include <linux/platform_device.h> |
| 30 | #include <linux/delay.h> |
| 31 | #include <linux/sched.h> |
| 32 | #include <linux/slab.h> |
| 33 | #include <linux/phy.h> |
| 34 | #include <linux/clk.h> |
| 35 | #include <linux/err.h> |
| 36 | #include <linux/io.h> |
| 37 | #include <linux/davinci_emac.h> |
| 38 | |
| 39 | /* |
| 40 | * This timeout definition is a worst-case ultra defensive measure against |
| 41 | * unexpected controller lock ups. Ideally, we should never ever hit this |
| 42 | * scenario in practice. |
| 43 | */ |
| 44 | #define MDIO_TIMEOUT 100 /* msecs */ |
| 45 | |
| 46 | #define PHY_REG_MASK 0x1f |
| 47 | #define PHY_ID_MASK 0x1f |
| 48 | |
| 49 | #define DEF_OUT_FREQ 2200000 /* 2.2 MHz */ |
| 50 | |
| 51 | struct davinci_mdio_regs { |
| 52 | u32 version; |
| 53 | u32 control; |
| 54 | #define CONTROL_IDLE BIT(31) |
| 55 | #define CONTROL_ENABLE BIT(30) |
| 56 | #define CONTROL_MAX_DIV (0xff) |
| 57 | |
| 58 | u32 alive; |
| 59 | u32 link; |
| 60 | u32 linkintraw; |
| 61 | u32 linkintmasked; |
| 62 | u32 __reserved_0[2]; |
| 63 | u32 userintraw; |
| 64 | u32 userintmasked; |
| 65 | u32 userintmaskset; |
| 66 | u32 userintmaskclr; |
| 67 | u32 __reserved_1[20]; |
| 68 | |
| 69 | struct { |
| 70 | u32 access; |
| 71 | #define USERACCESS_GO BIT(31) |
| 72 | #define USERACCESS_WRITE BIT(30) |
| 73 | #define USERACCESS_ACK BIT(29) |
| 74 | #define USERACCESS_READ (0) |
| 75 | #define USERACCESS_DATA (0xffff) |
| 76 | |
| 77 | u32 physel; |
| 78 | } user[0]; |
| 79 | }; |
| 80 | |
| 81 | struct mdio_platform_data default_pdata = { |
| 82 | .bus_freq = DEF_OUT_FREQ, |
| 83 | }; |
| 84 | |
| 85 | struct davinci_mdio_data { |
| 86 | struct mdio_platform_data pdata; |
| 87 | struct davinci_mdio_regs __iomem *regs; |
| 88 | spinlock_t lock; |
| 89 | struct clk *clk; |
| 90 | struct device *dev; |
| 91 | struct mii_bus *bus; |
| 92 | bool suspended; |
| 93 | unsigned long access_time; /* jiffies */ |
| 94 | }; |
| 95 | |
| 96 | static void __davinci_mdio_reset(struct davinci_mdio_data *data) |
| 97 | { |
| 98 | u32 mdio_in, div, mdio_out_khz, access_time; |
| 99 | |
| 100 | mdio_in = clk_get_rate(data->clk); |
| 101 | div = (mdio_in / data->pdata.bus_freq) - 1; |
| 102 | if (div > CONTROL_MAX_DIV) |
| 103 | div = CONTROL_MAX_DIV; |
| 104 | |
| 105 | /* set enable and clock divider */ |
| 106 | __raw_writel(div | CONTROL_ENABLE, &data->regs->control); |
| 107 | |
| 108 | /* |
| 109 | * One mdio transaction consists of: |
| 110 | * 32 bits of preamble |
| 111 | * 32 bits of transferred data |
| 112 | * 24 bits of bus yield (not needed unless shared?) |
| 113 | */ |
| 114 | mdio_out_khz = mdio_in / (1000 * (div + 1)); |
| 115 | access_time = (88 * 1000) / mdio_out_khz; |
| 116 | |
| 117 | /* |
| 118 | * In the worst case, we could be kicking off a user-access immediately |
| 119 | * after the mdio bus scan state-machine triggered its own read. If |
| 120 | * so, our request could get deferred by one access cycle. We |
| 121 | * defensively allow for 4 access cycles. |
| 122 | */ |
| 123 | data->access_time = usecs_to_jiffies(access_time * 4); |
| 124 | if (!data->access_time) |
| 125 | data->access_time = 1; |
| 126 | } |
| 127 | |
| 128 | static int davinci_mdio_reset(struct mii_bus *bus) |
| 129 | { |
| 130 | struct davinci_mdio_data *data = bus->priv; |
| 131 | u32 phy_mask, ver; |
| 132 | |
| 133 | __davinci_mdio_reset(data); |
| 134 | |
| 135 | /* wait for scan logic to settle */ |
| 136 | msleep(PHY_MAX_ADDR * data->access_time); |
| 137 | |
| 138 | /* dump hardware version info */ |
| 139 | ver = __raw_readl(&data->regs->version); |
| 140 | dev_info(data->dev, "davinci mdio revision %d.%d\n", |
| 141 | (ver >> 8) & 0xff, ver & 0xff); |
| 142 | |
| 143 | /* get phy mask from the alive register */ |
| 144 | phy_mask = __raw_readl(&data->regs->alive); |
| 145 | if (phy_mask) { |
| 146 | /* restrict mdio bus to live phys only */ |
| 147 | dev_info(data->dev, "detected phy mask %x\n", ~phy_mask); |
| 148 | phy_mask = ~phy_mask; |
| 149 | } else { |
| 150 | /* desperately scan all phys */ |
| 151 | dev_warn(data->dev, "no live phy, scanning all\n"); |
| 152 | phy_mask = 0; |
| 153 | } |
| 154 | data->bus->phy_mask = phy_mask; |
| 155 | |
| 156 | return 0; |
| 157 | } |
| 158 | |
| 159 | /* wait until hardware is ready for another user access */ |
| 160 | static inline int wait_for_user_access(struct davinci_mdio_data *data) |
| 161 | { |
| 162 | struct davinci_mdio_regs __iomem *regs = data->regs; |
| 163 | unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT); |
| 164 | u32 reg; |
| 165 | |
| 166 | while (time_after(timeout, jiffies)) { |
| 167 | reg = __raw_readl(®s->user[0].access); |
| 168 | if ((reg & USERACCESS_GO) == 0) |
| 169 | return 0; |
| 170 | |
| 171 | reg = __raw_readl(®s->control); |
| 172 | if ((reg & CONTROL_IDLE) == 0) |
| 173 | continue; |
| 174 | |
| 175 | /* |
| 176 | * An emac soft_reset may have clobbered the mdio controller's |
| 177 | * state machine. We need to reset and retry the current |
| 178 | * operation |
| 179 | */ |
| 180 | dev_warn(data->dev, "resetting idled controller\n"); |
| 181 | __davinci_mdio_reset(data); |
| 182 | return -EAGAIN; |
| 183 | } |
| 184 | dev_err(data->dev, "timed out waiting for user access\n"); |
| 185 | return -ETIMEDOUT; |
| 186 | } |
| 187 | |
| 188 | /* wait until hardware state machine is idle */ |
| 189 | static inline int wait_for_idle(struct davinci_mdio_data *data) |
| 190 | { |
| 191 | struct davinci_mdio_regs __iomem *regs = data->regs; |
| 192 | unsigned long timeout = jiffies + msecs_to_jiffies(MDIO_TIMEOUT); |
| 193 | |
| 194 | while (time_after(timeout, jiffies)) { |
| 195 | if (__raw_readl(®s->control) & CONTROL_IDLE) |
| 196 | return 0; |
| 197 | } |
| 198 | dev_err(data->dev, "timed out waiting for idle\n"); |
| 199 | return -ETIMEDOUT; |
| 200 | } |
| 201 | |
| 202 | static int davinci_mdio_read(struct mii_bus *bus, int phy_id, int phy_reg) |
| 203 | { |
| 204 | struct davinci_mdio_data *data = bus->priv; |
| 205 | u32 reg; |
| 206 | int ret; |
| 207 | |
| 208 | if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) |
| 209 | return -EINVAL; |
| 210 | |
| 211 | spin_lock(&data->lock); |
| 212 | |
| 213 | if (data->suspended) { |
| 214 | spin_unlock(&data->lock); |
| 215 | return -ENODEV; |
| 216 | } |
| 217 | |
| 218 | reg = (USERACCESS_GO | USERACCESS_READ | (phy_reg << 21) | |
| 219 | (phy_id << 16)); |
| 220 | |
| 221 | while (1) { |
| 222 | ret = wait_for_user_access(data); |
| 223 | if (ret == -EAGAIN) |
| 224 | continue; |
| 225 | if (ret < 0) |
| 226 | break; |
| 227 | |
| 228 | __raw_writel(reg, &data->regs->user[0].access); |
| 229 | |
| 230 | ret = wait_for_user_access(data); |
| 231 | if (ret == -EAGAIN) |
| 232 | continue; |
| 233 | if (ret < 0) |
| 234 | break; |
| 235 | |
| 236 | reg = __raw_readl(&data->regs->user[0].access); |
| 237 | ret = (reg & USERACCESS_ACK) ? (reg & USERACCESS_DATA) : -EIO; |
| 238 | break; |
| 239 | } |
| 240 | |
| 241 | spin_unlock(&data->lock); |
| 242 | |
| 243 | return ret; |
| 244 | } |
| 245 | |
| 246 | static int davinci_mdio_write(struct mii_bus *bus, int phy_id, |
| 247 | int phy_reg, u16 phy_data) |
| 248 | { |
| 249 | struct davinci_mdio_data *data = bus->priv; |
| 250 | u32 reg; |
| 251 | int ret; |
| 252 | |
| 253 | if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK) |
| 254 | return -EINVAL; |
| 255 | |
| 256 | spin_lock(&data->lock); |
| 257 | |
| 258 | if (data->suspended) { |
| 259 | spin_unlock(&data->lock); |
| 260 | return -ENODEV; |
| 261 | } |
| 262 | |
| 263 | reg = (USERACCESS_GO | USERACCESS_WRITE | (phy_reg << 21) | |
| 264 | (phy_id << 16) | (phy_data & USERACCESS_DATA)); |
| 265 | |
| 266 | while (1) { |
| 267 | ret = wait_for_user_access(data); |
| 268 | if (ret == -EAGAIN) |
| 269 | continue; |
| 270 | if (ret < 0) |
| 271 | break; |
| 272 | |
| 273 | __raw_writel(reg, &data->regs->user[0].access); |
| 274 | |
| 275 | ret = wait_for_user_access(data); |
| 276 | if (ret == -EAGAIN) |
| 277 | continue; |
| 278 | break; |
| 279 | } |
| 280 | |
| 281 | spin_unlock(&data->lock); |
| 282 | |
| 283 | return 0; |
| 284 | } |
| 285 | |
| 286 | static int __devinit davinci_mdio_probe(struct platform_device *pdev) |
| 287 | { |
| 288 | struct mdio_platform_data *pdata = pdev->dev.platform_data; |
| 289 | struct device *dev = &pdev->dev; |
| 290 | struct davinci_mdio_data *data; |
| 291 | struct resource *res; |
| 292 | struct phy_device *phy; |
| 293 | int ret, addr; |
| 294 | |
| 295 | data = kzalloc(sizeof(*data), GFP_KERNEL); |
| 296 | if (!data) { |
| 297 | dev_err(dev, "failed to alloc device data\n"); |
| 298 | return -ENOMEM; |
| 299 | } |
| 300 | |
| 301 | data->pdata = pdata ? (*pdata) : default_pdata; |
| 302 | |
| 303 | data->bus = mdiobus_alloc(); |
| 304 | if (!data->bus) { |
| 305 | dev_err(dev, "failed to alloc mii bus\n"); |
| 306 | ret = -ENOMEM; |
| 307 | goto bail_out; |
| 308 | } |
| 309 | |
| 310 | data->bus->name = dev_name(dev); |
| 311 | data->bus->read = davinci_mdio_read, |
| 312 | data->bus->write = davinci_mdio_write, |
| 313 | data->bus->reset = davinci_mdio_reset, |
| 314 | data->bus->parent = dev; |
| 315 | data->bus->priv = data; |
| 316 | snprintf(data->bus->id, MII_BUS_ID_SIZE, "%x", pdev->id); |
| 317 | |
| 318 | data->clk = clk_get(dev, NULL); |
| 319 | if (IS_ERR(data->clk)) { |
| 320 | data->clk = NULL; |
| 321 | dev_err(dev, "failed to get device clock\n"); |
| 322 | ret = PTR_ERR(data->clk); |
| 323 | goto bail_out; |
| 324 | } |
| 325 | |
| 326 | clk_enable(data->clk); |
| 327 | |
| 328 | dev_set_drvdata(dev, data); |
| 329 | data->dev = dev; |
| 330 | spin_lock_init(&data->lock); |
| 331 | |
| 332 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 333 | if (!res) { |
| 334 | dev_err(dev, "could not find register map resource\n"); |
| 335 | ret = -ENOENT; |
| 336 | goto bail_out; |
| 337 | } |
| 338 | |
| 339 | res = devm_request_mem_region(dev, res->start, resource_size(res), |
| 340 | dev_name(dev)); |
| 341 | if (!res) { |
| 342 | dev_err(dev, "could not allocate register map resource\n"); |
| 343 | ret = -ENXIO; |
| 344 | goto bail_out; |
| 345 | } |
| 346 | |
| 347 | data->regs = devm_ioremap_nocache(dev, res->start, resource_size(res)); |
| 348 | if (!data->regs) { |
| 349 | dev_err(dev, "could not map mdio registers\n"); |
| 350 | ret = -ENOMEM; |
| 351 | goto bail_out; |
| 352 | } |
| 353 | |
| 354 | /* register the mii bus */ |
| 355 | ret = mdiobus_register(data->bus); |
| 356 | if (ret) |
| 357 | goto bail_out; |
| 358 | |
| 359 | /* scan and dump the bus */ |
| 360 | for (addr = 0; addr < PHY_MAX_ADDR; addr++) { |
| 361 | phy = data->bus->phy_map[addr]; |
| 362 | if (phy) { |
| 363 | dev_info(dev, "phy[%d]: device %s, driver %s\n", |
| 364 | phy->addr, dev_name(&phy->dev), |
| 365 | phy->drv ? phy->drv->name : "unknown"); |
| 366 | } |
| 367 | } |
| 368 | |
| 369 | return 0; |
| 370 | |
| 371 | bail_out: |
| 372 | if (data->bus) |
| 373 | mdiobus_free(data->bus); |
| 374 | |
| 375 | if (data->clk) { |
| 376 | clk_disable(data->clk); |
| 377 | clk_put(data->clk); |
| 378 | } |
| 379 | |
| 380 | kfree(data); |
| 381 | |
| 382 | return ret; |
| 383 | } |
| 384 | |
| 385 | static int __devexit davinci_mdio_remove(struct platform_device *pdev) |
| 386 | { |
| 387 | struct device *dev = &pdev->dev; |
| 388 | struct davinci_mdio_data *data = dev_get_drvdata(dev); |
| 389 | |
| 390 | if (data->bus) |
| 391 | mdiobus_free(data->bus); |
| 392 | |
| 393 | if (data->clk) { |
| 394 | clk_disable(data->clk); |
| 395 | clk_put(data->clk); |
| 396 | } |
| 397 | |
| 398 | dev_set_drvdata(dev, NULL); |
| 399 | |
| 400 | kfree(data); |
| 401 | |
| 402 | return 0; |
| 403 | } |
| 404 | |
| 405 | static int davinci_mdio_suspend(struct device *dev) |
| 406 | { |
| 407 | struct davinci_mdio_data *data = dev_get_drvdata(dev); |
| 408 | u32 ctrl; |
| 409 | |
| 410 | spin_lock(&data->lock); |
| 411 | |
| 412 | /* shutdown the scan state machine */ |
| 413 | ctrl = __raw_readl(&data->regs->control); |
| 414 | ctrl &= ~CONTROL_ENABLE; |
| 415 | __raw_writel(ctrl, &data->regs->control); |
| 416 | wait_for_idle(data); |
| 417 | |
| 418 | if (data->clk) |
| 419 | clk_disable(data->clk); |
| 420 | |
| 421 | data->suspended = true; |
| 422 | spin_unlock(&data->lock); |
| 423 | |
| 424 | return 0; |
| 425 | } |
| 426 | |
| 427 | static int davinci_mdio_resume(struct device *dev) |
| 428 | { |
| 429 | struct davinci_mdio_data *data = dev_get_drvdata(dev); |
| 430 | u32 ctrl; |
| 431 | |
| 432 | spin_lock(&data->lock); |
| 433 | if (data->clk) |
| 434 | clk_enable(data->clk); |
| 435 | |
| 436 | /* restart the scan state machine */ |
| 437 | ctrl = __raw_readl(&data->regs->control); |
| 438 | ctrl |= CONTROL_ENABLE; |
| 439 | __raw_writel(ctrl, &data->regs->control); |
| 440 | |
| 441 | data->suspended = false; |
| 442 | spin_unlock(&data->lock); |
| 443 | |
| 444 | return 0; |
| 445 | } |
| 446 | |
| 447 | static const struct dev_pm_ops davinci_mdio_pm_ops = { |
| 448 | .suspend = davinci_mdio_suspend, |
| 449 | .resume = davinci_mdio_resume, |
| 450 | }; |
| 451 | |
| 452 | static struct platform_driver davinci_mdio_driver = { |
| 453 | .driver = { |
| 454 | .name = "davinci_mdio", |
| 455 | .owner = THIS_MODULE, |
| 456 | .pm = &davinci_mdio_pm_ops, |
| 457 | }, |
| 458 | .probe = davinci_mdio_probe, |
| 459 | .remove = __devexit_p(davinci_mdio_remove), |
| 460 | }; |
| 461 | |
| 462 | static int __init davinci_mdio_init(void) |
| 463 | { |
| 464 | return platform_driver_register(&davinci_mdio_driver); |
| 465 | } |
| 466 | device_initcall(davinci_mdio_init); |
| 467 | |
| 468 | static void __exit davinci_mdio_exit(void) |
| 469 | { |
| 470 | platform_driver_unregister(&davinci_mdio_driver); |
| 471 | } |
| 472 | module_exit(davinci_mdio_exit); |
| 473 | |
| 474 | MODULE_LICENSE("GPL"); |
| 475 | MODULE_DESCRIPTION("DaVinci MDIO driver"); |