blob: 429cfdbb2b3d60c29f4c3fc12d4a5001aa2dd219 [file] [log] [blame]
Kevin Wellse6e912c2010-07-27 08:42:07 -07001/*
2 * arch/arm/mach-lpc32xx/serial.c
3 *
4 * Author: Kevin Wells <kevin.wells@nxp.com>
5 *
6 * Copyright (C) 2010 NXP Semiconductors
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 */
18
19#include <linux/kernel.h>
20#include <linux/types.h>
21#include <linux/serial.h>
22#include <linux/serial_core.h>
23#include <linux/serial_reg.h>
24#include <linux/serial_8250.h>
25#include <linux/clk.h>
26#include <linux/io.h>
27
28#include <mach/hardware.h>
29#include <mach/platform.h>
30#include "common.h"
31
32#define LPC32XX_SUART_FIFO_SIZE 64
33
34/* Standard 8250/16550 compatible serial ports */
35static struct plat_serial8250_port serial_std_platform_data[] = {
36#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
37 {
38 .membase = io_p2v(LPC32XX_UART5_BASE),
39 .mapbase = LPC32XX_UART5_BASE,
40 .irq = IRQ_LPC32XX_UART_IIR5,
41 .uartclk = LPC32XX_MAIN_OSC_FREQ,
42 .regshift = 2,
43 .iotype = UPIO_MEM32,
44 .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
45 UPF_SKIP_TEST,
46 },
47#endif
48#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
49 {
50 .membase = io_p2v(LPC32XX_UART3_BASE),
51 .mapbase = LPC32XX_UART3_BASE,
52 .irq = IRQ_LPC32XX_UART_IIR3,
53 .uartclk = LPC32XX_MAIN_OSC_FREQ,
54 .regshift = 2,
55 .iotype = UPIO_MEM32,
56 .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
57 UPF_SKIP_TEST,
58 },
59#endif
60#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
61 {
62 .membase = io_p2v(LPC32XX_UART4_BASE),
63 .mapbase = LPC32XX_UART4_BASE,
64 .irq = IRQ_LPC32XX_UART_IIR4,
65 .uartclk = LPC32XX_MAIN_OSC_FREQ,
66 .regshift = 2,
67 .iotype = UPIO_MEM32,
68 .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
69 UPF_SKIP_TEST,
70 },
71#endif
72#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
73 {
74 .membase = io_p2v(LPC32XX_UART6_BASE),
75 .mapbase = LPC32XX_UART6_BASE,
76 .irq = IRQ_LPC32XX_UART_IIR6,
77 .uartclk = LPC32XX_MAIN_OSC_FREQ,
78 .regshift = 2,
79 .iotype = UPIO_MEM32,
80 .flags = UPF_BOOT_AUTOCONF | UPF_BUGGY_UART |
81 UPF_SKIP_TEST,
82 },
83#endif
84 { },
85};
86
87struct uartinit {
88 char *uart_ck_name;
89 u32 ck_mode_mask;
90 void __iomem *pdiv_clk_reg;
91};
92
93static struct uartinit uartinit_data[] __initdata = {
94#ifdef CONFIG_ARCH_LPC32XX_UART5_SELECT
95 {
96 .uart_ck_name = "uart5_ck",
97 .ck_mode_mask =
98 LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 5),
99 .pdiv_clk_reg = LPC32XX_CLKPWR_UART5_CLK_CTRL,
100 },
101#endif
102#ifdef CONFIG_ARCH_LPC32XX_UART3_SELECT
103 {
104 .uart_ck_name = "uart3_ck",
105 .ck_mode_mask =
106 LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 3),
107 .pdiv_clk_reg = LPC32XX_CLKPWR_UART3_CLK_CTRL,
108 },
109#endif
110#ifdef CONFIG_ARCH_LPC32XX_UART4_SELECT
111 {
112 .uart_ck_name = "uart4_ck",
113 .ck_mode_mask =
114 LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 4),
115 .pdiv_clk_reg = LPC32XX_CLKPWR_UART4_CLK_CTRL,
116 },
117#endif
118#ifdef CONFIG_ARCH_LPC32XX_UART6_SELECT
119 {
120 .uart_ck_name = "uart6_ck",
121 .ck_mode_mask =
122 LPC32XX_UART_CLKMODE_LOAD(LPC32XX_UART_CLKMODE_ON, 6),
123 .pdiv_clk_reg = LPC32XX_CLKPWR_UART6_CLK_CTRL,
124 },
125#endif
126};
127
128static struct platform_device serial_std_platform_device = {
129 .name = "serial8250",
130 .id = 0,
131 .dev = {
132 .platform_data = serial_std_platform_data,
133 },
134};
135
136static struct platform_device *lpc32xx_serial_devs[] __initdata = {
137 &serial_std_platform_device,
138};
139
140void __init lpc32xx_serial_init(void)
141{
142 u32 tmp, clkmodes = 0;
143 struct clk *clk;
144 unsigned int puart;
145 int i, j;
146
147 /* UART clocks are off, let clock driver manage them */
148 __raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL);
149
150 for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) {
151 clk = clk_get(NULL, uartinit_data[i].uart_ck_name);
152 if (!IS_ERR(clk)) {
153 clk_enable(clk);
154 serial_std_platform_data[i].uartclk =
155 clk_get_rate(clk);
156 }
157
158 /* Fall back on main osc rate if clock rate return fails */
159 if (serial_std_platform_data[i].uartclk == 0)
160 serial_std_platform_data[i].uartclk =
161 LPC32XX_MAIN_OSC_FREQ;
162
163 /* Setup UART clock modes for all UARTs, disable autoclock */
164 clkmodes |= uartinit_data[i].ck_mode_mask;
165
166 /* pre-UART clock divider set to 1 */
167 __raw_writel(0x0101, uartinit_data[i].pdiv_clk_reg);
168 }
169
170 /* This needs to be done after all UART clocks are setup */
171 __raw_writel(clkmodes, LPC32XX_UARTCTL_CLKMODE);
172 for (i = 0; i < ARRAY_SIZE(uartinit_data) - 1; i++) {
173 /* Force a flush of the RX FIFOs to work around a HW bug */
174 puart = serial_std_platform_data[i].mapbase;
175 __raw_writel(0xC1, LPC32XX_UART_IIR_FCR(puart));
176 __raw_writel(0x00, LPC32XX_UART_DLL_FIFO(puart));
177 j = LPC32XX_SUART_FIFO_SIZE;
178 while (j--)
179 tmp = __raw_readl(LPC32XX_UART_DLL_FIFO(puart));
180 __raw_writel(0, LPC32XX_UART_IIR_FCR(puart));
181 }
182
183 /* Disable UART5->USB transparent mode or USB won't work */
184 tmp = __raw_readl(LPC32XX_UARTCTL_CTRL);
185 tmp &= ~LPC32XX_UART_U5_ROUTE_TO_USB;
186 __raw_writel(tmp, LPC32XX_UARTCTL_CTRL);
187
188 platform_add_devices(lpc32xx_serial_devs,
189 ARRAY_SIZE(lpc32xx_serial_devs));
190}