blob: 4e1a632ccf162ea52365b84e71aab19b44619280 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* imm.c -- low level driver for the IOMEGA MatchMaker
2 * parallel port SCSI host adapter.
3 *
4 * (The IMM is the embedded controller in the ZIP Plus drive.)
5 *
Lucas De Marchi25985ed2011-03-30 22:57:33 -03006 * My unofficial company acronym list is 21 pages long:
Linus Torvalds1da177e2005-04-16 15:20:36 -07007 * FLA: Four letter acronym with built in facility for
8 * future expansion to five letters.
9 */
10
Linus Torvalds1da177e2005-04-16 15:20:36 -070011#include <linux/init.h>
12#include <linux/kernel.h>
13#include <linux/module.h>
14#include <linux/blkdev.h>
15#include <linux/parport.h>
16#include <linux/workqueue.h>
Jeff Garzik 68b3aa72005-05-28 07:56:31 -040017#include <linux/delay.h>
Tejun Heo5a0e3ad2010-03-24 17:04:11 +090018#include <linux/slab.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070019#include <asm/io.h>
20
21#include <scsi/scsi.h>
22#include <scsi/scsi_cmnd.h>
23#include <scsi/scsi_device.h>
24#include <scsi/scsi_host.h>
25
26/* The following #define is to avoid a clash with hosts.c */
27#define IMM_PROBE_SPP 0x0001
28#define IMM_PROBE_PS2 0x0002
29#define IMM_PROBE_ECR 0x0010
30#define IMM_PROBE_EPP17 0x0100
31#define IMM_PROBE_EPP19 0x0200
32
33
34typedef struct {
35 struct pardevice *dev; /* Parport device entry */
36 int base; /* Actual port address */
37 int base_hi; /* Hi Base address for ECP-ISA chipset */
38 int mode; /* Transfer mode */
39 struct scsi_cmnd *cur_cmd; /* Current queued command */
David Howellsc4028952006-11-22 14:57:56 +000040 struct delayed_work imm_tq; /* Polling interrupt stuff */
Linus Torvalds1da177e2005-04-16 15:20:36 -070041 unsigned long jstart; /* Jiffies at start */
42 unsigned failed:1; /* Failure flag */
43 unsigned dp:1; /* Data phase present */
44 unsigned rd:1; /* Read data in data phase */
45 unsigned wanted:1; /* Parport sharing busy flag */
46 wait_queue_head_t *waiting;
47 struct Scsi_Host *host;
48 struct list_head list;
49} imm_struct;
50
51static void imm_reset_pulse(unsigned int base);
52static int device_check(imm_struct *dev);
53
54#include "imm.h"
55
56static inline imm_struct *imm_dev(struct Scsi_Host *host)
57{
58 return *(imm_struct **)&host->hostdata;
59}
60
61static DEFINE_SPINLOCK(arbitration_lock);
62
63static void got_it(imm_struct *dev)
64{
65 dev->base = dev->dev->port->base;
66 if (dev->cur_cmd)
67 dev->cur_cmd->SCp.phase = 1;
68 else
69 wake_up(dev->waiting);
70}
71
72static void imm_wakeup(void *ref)
73{
74 imm_struct *dev = (imm_struct *) ref;
75 unsigned long flags;
76
77 spin_lock_irqsave(&arbitration_lock, flags);
78 if (dev->wanted) {
79 parport_claim(dev->dev);
80 got_it(dev);
81 dev->wanted = 0;
82 }
83 spin_unlock_irqrestore(&arbitration_lock, flags);
84}
85
86static int imm_pb_claim(imm_struct *dev)
87{
88 unsigned long flags;
89 int res = 1;
90 spin_lock_irqsave(&arbitration_lock, flags);
91 if (parport_claim(dev->dev) == 0) {
92 got_it(dev);
93 res = 0;
94 }
95 dev->wanted = res;
96 spin_unlock_irqrestore(&arbitration_lock, flags);
97 return res;
98}
99
100static void imm_pb_dismiss(imm_struct *dev)
101{
102 unsigned long flags;
103 int wanted;
104 spin_lock_irqsave(&arbitration_lock, flags);
105 wanted = dev->wanted;
106 dev->wanted = 0;
107 spin_unlock_irqrestore(&arbitration_lock, flags);
108 if (!wanted)
109 parport_release(dev->dev);
110}
111
112static inline void imm_pb_release(imm_struct *dev)
113{
114 parport_release(dev->dev);
115}
116
117/* This is to give the imm driver a way to modify the timings (and other
118 * parameters) by writing to the /proc/scsi/imm/0 file.
119 * Very simple method really... (Too simple, no error checking :( )
120 * Reason: Kernel hackers HATE having to unload and reload modules for
121 * testing...
122 * Also gives a method to use a script to obtain optimum timings (TODO)
123 */
Al Virofa5fd362013-03-31 00:55:40 -0400124static int imm_write_info(struct Scsi_Host *host, char *buffer, int length)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700125{
Al Virofa5fd362013-03-31 00:55:40 -0400126 imm_struct *dev = imm_dev(host);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700127
128 if ((length > 5) && (strncmp(buffer, "mode=", 5) == 0)) {
Al Virofa5fd362013-03-31 00:55:40 -0400129 dev->mode = simple_strtoul(buffer + 5, NULL, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700130 return length;
131 }
132 printk("imm /proc: invalid variable\n");
Al Virofa5fd362013-03-31 00:55:40 -0400133 return -EINVAL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134}
135
Al Virofa5fd362013-03-31 00:55:40 -0400136static int imm_show_info(struct seq_file *m, struct Scsi_Host *host)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700137{
138 imm_struct *dev = imm_dev(host);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700139
Al Virofa5fd362013-03-31 00:55:40 -0400140 seq_printf(m, "Version : %s\n", IMM_VERSION);
141 seq_printf(m, "Parport : %s\n", dev->dev->port->name);
142 seq_printf(m, "Mode : %s\n", IMM_MODE_STRING[dev->mode]);
143 return 0;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700144}
145
146#if IMM_DEBUG > 0
147#define imm_fail(x,y) printk("imm: imm_fail(%i) from %s at line %d\n",\
Harvey Harrisoncadbd4a2008-07-03 23:47:27 -0700148 y, __func__, __LINE__); imm_fail_func(x,y);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700149static inline void
150imm_fail_func(imm_struct *dev, int error_code)
151#else
152static inline void
153imm_fail(imm_struct *dev, int error_code)
154#endif
155{
156 /* If we fail a device then we trash status / message bytes */
157 if (dev->cur_cmd) {
158 dev->cur_cmd->result = error_code << 16;
159 dev->failed = 1;
160 }
161}
162
163/*
164 * Wait for the high bit to be set.
165 *
166 * In principle, this could be tied to an interrupt, but the adapter
167 * doesn't appear to be designed to support interrupts. We spin on
168 * the 0x80 ready bit.
169 */
170static unsigned char imm_wait(imm_struct *dev)
171{
172 int k;
173 unsigned short ppb = dev->base;
174 unsigned char r;
175
176 w_ctr(ppb, 0x0c);
177
178 k = IMM_SPIN_TMO;
179 do {
180 r = r_str(ppb);
181 k--;
182 udelay(1);
183 }
184 while (!(r & 0x80) && (k));
185
186 /*
187 * STR register (LPT base+1) to SCSI mapping:
188 *
189 * STR imm imm
190 * ===================================
191 * 0x80 S_REQ S_REQ
192 * 0x40 !S_BSY (????)
193 * 0x20 !S_CD !S_CD
194 * 0x10 !S_IO !S_IO
195 * 0x08 (????) !S_BSY
196 *
197 * imm imm meaning
198 * ==================================
199 * 0xf0 0xb8 Bit mask
200 * 0xc0 0x88 ZIP wants more data
201 * 0xd0 0x98 ZIP wants to send more data
202 * 0xe0 0xa8 ZIP is expecting SCSI command data
203 * 0xf0 0xb8 end of transfer, ZIP is sending status
204 */
205 w_ctr(ppb, 0x04);
206 if (k)
207 return (r & 0xb8);
208
209 /* Counter expired - Time out occurred */
210 imm_fail(dev, DID_TIME_OUT);
211 printk("imm timeout in imm_wait\n");
212 return 0; /* command timed out */
213}
214
215static int imm_negotiate(imm_struct * tmp)
216{
217 /*
218 * The following is supposedly the IEEE 1284-1994 negotiate
219 * sequence. I have yet to obtain a copy of the above standard
220 * so this is a bit of a guess...
221 *
222 * A fair chunk of this is based on the Linux parport implementation
223 * of IEEE 1284.
224 *
225 * Return 0 if data available
226 * 1 if no data available
227 */
228
229 unsigned short base = tmp->base;
230 unsigned char a, mode;
231
232 switch (tmp->mode) {
233 case IMM_NIBBLE:
234 mode = 0x00;
235 break;
236 case IMM_PS2:
237 mode = 0x01;
238 break;
239 default:
240 return 0;
241 }
242
243 w_ctr(base, 0x04);
244 udelay(5);
245 w_dtr(base, mode);
246 udelay(100);
247 w_ctr(base, 0x06);
248 udelay(5);
249 a = (r_str(base) & 0x20) ? 0 : 1;
250 udelay(5);
251 w_ctr(base, 0x07);
252 udelay(5);
253 w_ctr(base, 0x06);
254
255 if (a) {
256 printk
257 ("IMM: IEEE1284 negotiate indicates no data available.\n");
258 imm_fail(tmp, DID_ERROR);
259 }
260 return a;
261}
262
263/*
264 * Clear EPP timeout bit.
265 */
266static inline void epp_reset(unsigned short ppb)
267{
268 int i;
269
270 i = r_str(ppb);
271 w_str(ppb, i);
272 w_str(ppb, i & 0xfe);
273}
274
275/*
276 * Wait for empty ECP fifo (if we are in ECP fifo mode only)
277 */
278static inline void ecp_sync(imm_struct *dev)
279{
280 int i, ppb_hi = dev->base_hi;
281
282 if (ppb_hi == 0)
283 return;
284
285 if ((r_ecr(ppb_hi) & 0xe0) == 0x60) { /* mode 011 == ECP fifo mode */
286 for (i = 0; i < 100; i++) {
287 if (r_ecr(ppb_hi) & 0x01)
288 return;
289 udelay(5);
290 }
291 printk("imm: ECP sync failed as data still present in FIFO.\n");
292 }
293}
294
295static int imm_byte_out(unsigned short base, const char *buffer, int len)
296{
297 int i;
298
299 w_ctr(base, 0x4); /* apparently a sane mode */
300 for (i = len >> 1; i; i--) {
301 w_dtr(base, *buffer++);
302 w_ctr(base, 0x5); /* Drop STROBE low */
303 w_dtr(base, *buffer++);
304 w_ctr(base, 0x0); /* STROBE high + INIT low */
305 }
306 w_ctr(base, 0x4); /* apparently a sane mode */
307 return 1; /* All went well - we hope! */
308}
309
310static int imm_nibble_in(unsigned short base, char *buffer, int len)
311{
312 unsigned char l;
313 int i;
314
315 /*
316 * The following is based on documented timing signals
317 */
318 w_ctr(base, 0x4);
319 for (i = len; i; i--) {
320 w_ctr(base, 0x6);
321 l = (r_str(base) & 0xf0) >> 4;
322 w_ctr(base, 0x5);
323 *buffer++ = (r_str(base) & 0xf0) | l;
324 w_ctr(base, 0x4);
325 }
326 return 1; /* All went well - we hope! */
327}
328
329static int imm_byte_in(unsigned short base, char *buffer, int len)
330{
331 int i;
332
333 /*
334 * The following is based on documented timing signals
335 */
336 w_ctr(base, 0x4);
337 for (i = len; i; i--) {
338 w_ctr(base, 0x26);
339 *buffer++ = r_dtr(base);
340 w_ctr(base, 0x25);
341 }
342 return 1; /* All went well - we hope! */
343}
344
345static int imm_out(imm_struct *dev, char *buffer, int len)
346{
347 unsigned short ppb = dev->base;
348 int r = imm_wait(dev);
349
350 /*
351 * Make sure that:
352 * a) the SCSI bus is BUSY (device still listening)
353 * b) the device is listening
354 */
355 if ((r & 0x18) != 0x08) {
356 imm_fail(dev, DID_ERROR);
357 printk("IMM: returned SCSI status %2x\n", r);
358 return 0;
359 }
360 switch (dev->mode) {
361 case IMM_EPP_32:
362 case IMM_EPP_16:
363 case IMM_EPP_8:
364 epp_reset(ppb);
365 w_ctr(ppb, 0x4);
366#ifdef CONFIG_SCSI_IZIP_EPP16
367 if (!(((long) buffer | len) & 0x01))
368 outsw(ppb + 4, buffer, len >> 1);
369#else
370 if (!(((long) buffer | len) & 0x03))
371 outsl(ppb + 4, buffer, len >> 2);
372#endif
373 else
374 outsb(ppb + 4, buffer, len);
375 w_ctr(ppb, 0xc);
376 r = !(r_str(ppb) & 0x01);
377 w_ctr(ppb, 0xc);
378 ecp_sync(dev);
379 break;
380
381 case IMM_NIBBLE:
382 case IMM_PS2:
383 /* 8 bit output, with a loop */
384 r = imm_byte_out(ppb, buffer, len);
385 break;
386
387 default:
388 printk("IMM: bug in imm_out()\n");
389 r = 0;
390 }
391 return r;
392}
393
394static int imm_in(imm_struct *dev, char *buffer, int len)
395{
396 unsigned short ppb = dev->base;
397 int r = imm_wait(dev);
398
399 /*
400 * Make sure that:
401 * a) the SCSI bus is BUSY (device still listening)
402 * b) the device is sending data
403 */
404 if ((r & 0x18) != 0x18) {
405 imm_fail(dev, DID_ERROR);
406 return 0;
407 }
408 switch (dev->mode) {
409 case IMM_NIBBLE:
410 /* 4 bit input, with a loop */
411 r = imm_nibble_in(ppb, buffer, len);
412 w_ctr(ppb, 0xc);
413 break;
414
415 case IMM_PS2:
416 /* 8 bit input, with a loop */
417 r = imm_byte_in(ppb, buffer, len);
418 w_ctr(ppb, 0xc);
419 break;
420
421 case IMM_EPP_32:
422 case IMM_EPP_16:
423 case IMM_EPP_8:
424 epp_reset(ppb);
425 w_ctr(ppb, 0x24);
426#ifdef CONFIG_SCSI_IZIP_EPP16
427 if (!(((long) buffer | len) & 0x01))
428 insw(ppb + 4, buffer, len >> 1);
429#else
430 if (!(((long) buffer | len) & 0x03))
431 insl(ppb + 4, buffer, len >> 2);
432#endif
433 else
434 insb(ppb + 4, buffer, len);
435 w_ctr(ppb, 0x2c);
436 r = !(r_str(ppb) & 0x01);
437 w_ctr(ppb, 0x2c);
438 ecp_sync(dev);
439 break;
440
441 default:
442 printk("IMM: bug in imm_ins()\n");
443 r = 0;
444 break;
445 }
446 return r;
447}
448
449static int imm_cpp(unsigned short ppb, unsigned char b)
450{
451 /*
452 * Comments on udelay values refer to the
453 * Command Packet Protocol (CPP) timing diagram.
454 */
455
456 unsigned char s1, s2, s3;
457 w_ctr(ppb, 0x0c);
458 udelay(2); /* 1 usec - infinite */
459 w_dtr(ppb, 0xaa);
460 udelay(10); /* 7 usec - infinite */
461 w_dtr(ppb, 0x55);
462 udelay(10); /* 7 usec - infinite */
463 w_dtr(ppb, 0x00);
464 udelay(10); /* 7 usec - infinite */
465 w_dtr(ppb, 0xff);
466 udelay(10); /* 7 usec - infinite */
467 s1 = r_str(ppb) & 0xb8;
468 w_dtr(ppb, 0x87);
469 udelay(10); /* 7 usec - infinite */
470 s2 = r_str(ppb) & 0xb8;
471 w_dtr(ppb, 0x78);
472 udelay(10); /* 7 usec - infinite */
473 s3 = r_str(ppb) & 0x38;
474 /*
475 * Values for b are:
476 * 0000 00aa Assign address aa to current device
477 * 0010 00aa Select device aa in EPP Winbond mode
478 * 0010 10aa Select device aa in EPP mode
479 * 0011 xxxx Deselect all devices
480 * 0110 00aa Test device aa
481 * 1101 00aa Select device aa in ECP mode
482 * 1110 00aa Select device aa in Compatible mode
483 */
484 w_dtr(ppb, b);
485 udelay(2); /* 1 usec - infinite */
486 w_ctr(ppb, 0x0c);
487 udelay(10); /* 7 usec - infinite */
488 w_ctr(ppb, 0x0d);
489 udelay(2); /* 1 usec - infinite */
490 w_ctr(ppb, 0x0c);
491 udelay(10); /* 7 usec - infinite */
492 w_dtr(ppb, 0xff);
493 udelay(10); /* 7 usec - infinite */
494
495 /*
496 * The following table is electrical pin values.
497 * (BSY is inverted at the CTR register)
498 *
499 * BSY ACK POut SEL Fault
500 * S1 0 X 1 1 1
501 * S2 1 X 0 1 1
502 * S3 L X 1 1 S
503 *
504 * L => Last device in chain
505 * S => Selected
506 *
507 * Observered values for S1,S2,S3 are:
508 * Disconnect => f8/58/78
509 * Connect => f8/58/70
510 */
511 if ((s1 == 0xb8) && (s2 == 0x18) && (s3 == 0x30))
512 return 1; /* Connected */
513 if ((s1 == 0xb8) && (s2 == 0x18) && (s3 == 0x38))
514 return 0; /* Disconnected */
515
516 return -1; /* No device present */
517}
518
519static inline int imm_connect(imm_struct *dev, int flag)
520{
521 unsigned short ppb = dev->base;
522
523 imm_cpp(ppb, 0xe0); /* Select device 0 in compatible mode */
524 imm_cpp(ppb, 0x30); /* Disconnect all devices */
525
526 if ((dev->mode == IMM_EPP_8) ||
527 (dev->mode == IMM_EPP_16) ||
528 (dev->mode == IMM_EPP_32))
529 return imm_cpp(ppb, 0x28); /* Select device 0 in EPP mode */
530 return imm_cpp(ppb, 0xe0); /* Select device 0 in compatible mode */
531}
532
533static void imm_disconnect(imm_struct *dev)
534{
535 imm_cpp(dev->base, 0x30); /* Disconnect all devices */
536}
537
538static int imm_select(imm_struct *dev, int target)
539{
540 int k;
541 unsigned short ppb = dev->base;
542
543 /*
544 * Firstly we want to make sure there is nothing
545 * holding onto the SCSI bus.
546 */
547 w_ctr(ppb, 0xc);
548
549 k = IMM_SELECT_TMO;
550 do {
551 k--;
552 } while ((r_str(ppb) & 0x08) && (k));
553
554 if (!k)
555 return 0;
556
557 /*
558 * Now assert the SCSI ID (HOST and TARGET) on the data bus
559 */
560 w_ctr(ppb, 0x4);
561 w_dtr(ppb, 0x80 | (1 << target));
562 udelay(1);
563
564 /*
565 * Deassert SELIN first followed by STROBE
566 */
567 w_ctr(ppb, 0xc);
568 w_ctr(ppb, 0xd);
569
570 /*
571 * ACK should drop low while SELIN is deasserted.
572 * FAULT should drop low when the SCSI device latches the bus.
573 */
574 k = IMM_SELECT_TMO;
575 do {
576 k--;
577 }
578 while (!(r_str(ppb) & 0x08) && (k));
579
580 /*
581 * Place the interface back into a sane state (status mode)
582 */
583 w_ctr(ppb, 0xc);
584 return (k) ? 1 : 0;
585}
586
587static int imm_init(imm_struct *dev)
588{
589 if (imm_connect(dev, 0) != 1)
590 return -EIO;
591 imm_reset_pulse(dev->base);
Jeff Garzik 68b3aa72005-05-28 07:56:31 -0400592 mdelay(1); /* Delay to allow devices to settle */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700593 imm_disconnect(dev);
Jeff Garzik 68b3aa72005-05-28 07:56:31 -0400594 mdelay(1); /* Another delay to allow devices to settle */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700595 return device_check(dev);
596}
597
598static inline int imm_send_command(struct scsi_cmnd *cmd)
599{
600 imm_struct *dev = imm_dev(cmd->device->host);
601 int k;
602
603 /* NOTE: IMM uses byte pairs */
604 for (k = 0; k < cmd->cmd_len; k += 2)
605 if (!imm_out(dev, &cmd->cmnd[k], 2))
606 return 0;
607 return 1;
608}
609
610/*
611 * The bulk flag enables some optimisations in the data transfer loops,
612 * it should be true for any command that transfers data in integral
613 * numbers of sectors.
614 *
615 * The driver appears to remain stable if we speed up the parallel port
616 * i/o in this function, but not elsewhere.
617 */
618static int imm_completion(struct scsi_cmnd *cmd)
619{
620 /* Return codes:
621 * -1 Error
622 * 0 Told to schedule
623 * 1 Finished data transfer
624 */
625 imm_struct *dev = imm_dev(cmd->device->host);
626 unsigned short ppb = dev->base;
627 unsigned long start_jiffies = jiffies;
628
629 unsigned char r, v;
630 int fast, bulk, status;
631
632 v = cmd->cmnd[0];
633 bulk = ((v == READ_6) ||
634 (v == READ_10) || (v == WRITE_6) || (v == WRITE_10));
635
636 /*
637 * We only get here if the drive is ready to comunicate,
638 * hence no need for a full imm_wait.
639 */
640 w_ctr(ppb, 0x0c);
641 r = (r_str(ppb) & 0xb8);
642
643 /*
644 * while (device is not ready to send status byte)
645 * loop;
646 */
647 while (r != (unsigned char) 0xb8) {
648 /*
649 * If we have been running for more than a full timer tick
650 * then take a rest.
651 */
652 if (time_after(jiffies, start_jiffies + 1))
653 return 0;
654
655 /*
656 * FAIL if:
657 * a) Drive status is screwy (!ready && !present)
658 * b) Drive is requesting/sending more data than expected
659 */
660 if (((r & 0x88) != 0x88) || (cmd->SCp.this_residual <= 0)) {
661 imm_fail(dev, DID_ERROR);
662 return -1; /* ERROR_RETURN */
663 }
664 /* determine if we should use burst I/O */
665 if (dev->rd == 0) {
666 fast = (bulk
667 && (cmd->SCp.this_residual >=
668 IMM_BURST_SIZE)) ? IMM_BURST_SIZE : 2;
669 status = imm_out(dev, cmd->SCp.ptr, fast);
670 } else {
671 fast = (bulk
672 && (cmd->SCp.this_residual >=
673 IMM_BURST_SIZE)) ? IMM_BURST_SIZE : 1;
674 status = imm_in(dev, cmd->SCp.ptr, fast);
675 }
676
677 cmd->SCp.ptr += fast;
678 cmd->SCp.this_residual -= fast;
679
680 if (!status) {
681 imm_fail(dev, DID_BUS_BUSY);
682 return -1; /* ERROR_RETURN */
683 }
684 if (cmd->SCp.buffer && !cmd->SCp.this_residual) {
685 /* if scatter/gather, advance to the next segment */
686 if (cmd->SCp.buffers_residual--) {
687 cmd->SCp.buffer++;
688 cmd->SCp.this_residual =
689 cmd->SCp.buffer->length;
Jens Axboe45711f12007-10-22 21:19:53 +0200690 cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700691
692 /*
693 * Make sure that we transfer even number of bytes
694 * otherwise it makes imm_byte_out() messy.
695 */
696 if (cmd->SCp.this_residual & 0x01)
697 cmd->SCp.this_residual++;
698 }
699 }
700 /* Now check to see if the drive is ready to comunicate */
701 w_ctr(ppb, 0x0c);
702 r = (r_str(ppb) & 0xb8);
703
704 /* If not, drop back down to the scheduler and wait a timer tick */
705 if (!(r & 0x80))
706 return 0;
707 }
708 return 1; /* FINISH_RETURN */
709}
710
711/*
712 * Since the IMM itself doesn't generate interrupts, we use
713 * the scheduler's task queue to generate a stream of call-backs and
714 * complete the request when the drive is ready.
715 */
David Howellsc4028952006-11-22 14:57:56 +0000716static void imm_interrupt(struct work_struct *work)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700717{
David Howellsc4028952006-11-22 14:57:56 +0000718 imm_struct *dev = container_of(work, imm_struct, imm_tq.work);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700719 struct scsi_cmnd *cmd = dev->cur_cmd;
720 struct Scsi_Host *host = cmd->device->host;
721 unsigned long flags;
722
Linus Torvalds1da177e2005-04-16 15:20:36 -0700723 if (imm_engine(dev, cmd)) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700724 schedule_delayed_work(&dev->imm_tq, 1);
725 return;
726 }
727 /* Command must of completed hence it is safe to let go... */
728#if IMM_DEBUG > 0
729 switch ((cmd->result >> 16) & 0xff) {
730 case DID_OK:
731 break;
732 case DID_NO_CONNECT:
733 printk("imm: no device at SCSI ID %i\n", cmd->device->id);
734 break;
735 case DID_BUS_BUSY:
736 printk("imm: BUS BUSY - EPP timeout detected\n");
737 break;
738 case DID_TIME_OUT:
739 printk("imm: unknown timeout\n");
740 break;
741 case DID_ABORT:
742 printk("imm: told to abort\n");
743 break;
744 case DID_PARITY:
745 printk("imm: parity error (???)\n");
746 break;
747 case DID_ERROR:
748 printk("imm: internal driver error\n");
749 break;
750 case DID_RESET:
751 printk("imm: told to reset device\n");
752 break;
753 case DID_BAD_INTR:
754 printk("imm: bad interrupt (???)\n");
755 break;
756 default:
757 printk("imm: bad return code (%02x)\n",
758 (cmd->result >> 16) & 0xff);
759 }
760#endif
761
762 if (cmd->SCp.phase > 1)
763 imm_disconnect(dev);
764
765 imm_pb_dismiss(dev);
766
767 spin_lock_irqsave(host->host_lock, flags);
768 dev->cur_cmd = NULL;
769 cmd->scsi_done(cmd);
770 spin_unlock_irqrestore(host->host_lock, flags);
771 return;
772}
773
774static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
775{
776 unsigned short ppb = dev->base;
777 unsigned char l = 0, h = 0;
778 int retv, x;
779
780 /* First check for any errors that may have occurred
781 * Here we check for internal errors
782 */
783 if (dev->failed)
784 return 0;
785
786 switch (cmd->SCp.phase) {
787 case 0: /* Phase 0 - Waiting for parport */
788 if (time_after(jiffies, dev->jstart + HZ)) {
789 /*
790 * We waited more than a second
791 * for parport to call us
792 */
793 imm_fail(dev, DID_BUS_BUSY);
794 return 0;
795 }
796 return 1; /* wait until imm_wakeup claims parport */
797 /* Phase 1 - Connected */
798 case 1:
799 imm_connect(dev, CONNECT_EPP_MAYBE);
800 cmd->SCp.phase++;
801
802 /* Phase 2 - We are now talking to the scsi bus */
803 case 2:
Jeff Garzik422c0d62005-10-24 18:05:09 -0400804 if (!imm_select(dev, scmd_id(cmd))) {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700805 imm_fail(dev, DID_NO_CONNECT);
806 return 0;
807 }
808 cmd->SCp.phase++;
809
810 /* Phase 3 - Ready to accept a command */
811 case 3:
812 w_ctr(ppb, 0x0c);
813 if (!(r_str(ppb) & 0x80))
814 return 1;
815
816 if (!imm_send_command(cmd))
817 return 0;
818 cmd->SCp.phase++;
819
820 /* Phase 4 - Setup scatter/gather buffers */
821 case 4:
Boaz Harrosh3ce7c652007-09-09 21:13:42 +0300822 if (scsi_bufflen(cmd)) {
823 cmd->SCp.buffer = scsi_sglist(cmd);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700824 cmd->SCp.this_residual = cmd->SCp.buffer->length;
Jens Axboe45711f12007-10-22 21:19:53 +0200825 cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700826 } else {
Linus Torvalds1da177e2005-04-16 15:20:36 -0700827 cmd->SCp.buffer = NULL;
Boaz Harrosh3ce7c652007-09-09 21:13:42 +0300828 cmd->SCp.this_residual = 0;
829 cmd->SCp.ptr = NULL;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700830 }
Boaz Harrosh3ce7c652007-09-09 21:13:42 +0300831 cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700832 cmd->SCp.phase++;
833 if (cmd->SCp.this_residual & 0x01)
834 cmd->SCp.this_residual++;
835 /* Phase 5 - Pre-Data transfer stage */
836 case 5:
837 /* Spin lock for BUSY */
838 w_ctr(ppb, 0x0c);
839 if (!(r_str(ppb) & 0x80))
840 return 1;
841
842 /* Require negotiation for read requests */
843 x = (r_str(ppb) & 0xb8);
844 dev->rd = (x & 0x10) ? 1 : 0;
845 dev->dp = (x & 0x20) ? 0 : 1;
846
847 if ((dev->dp) && (dev->rd))
848 if (imm_negotiate(dev))
849 return 0;
850 cmd->SCp.phase++;
851
852 /* Phase 6 - Data transfer stage */
853 case 6:
854 /* Spin lock for BUSY */
855 w_ctr(ppb, 0x0c);
856 if (!(r_str(ppb) & 0x80))
857 return 1;
858
859 if (dev->dp) {
860 retv = imm_completion(cmd);
861 if (retv == -1)
862 return 0;
863 if (retv == 0)
864 return 1;
865 }
866 cmd->SCp.phase++;
867
868 /* Phase 7 - Post data transfer stage */
869 case 7:
870 if ((dev->dp) && (dev->rd)) {
871 if ((dev->mode == IMM_NIBBLE) || (dev->mode == IMM_PS2)) {
872 w_ctr(ppb, 0x4);
873 w_ctr(ppb, 0xc);
874 w_ctr(ppb, 0xe);
875 w_ctr(ppb, 0x4);
876 }
877 }
878 cmd->SCp.phase++;
879
880 /* Phase 8 - Read status/message */
881 case 8:
882 /* Check for data overrun */
883 if (imm_wait(dev) != (unsigned char) 0xb8) {
884 imm_fail(dev, DID_ERROR);
885 return 0;
886 }
887 if (imm_negotiate(dev))
888 return 0;
889 if (imm_in(dev, &l, 1)) { /* read status byte */
890 /* Check for optional message byte */
891 if (imm_wait(dev) == (unsigned char) 0xb8)
892 imm_in(dev, &h, 1);
893 cmd->result = (DID_OK << 16) + (l & STATUS_MASK);
894 }
895 if ((dev->mode == IMM_NIBBLE) || (dev->mode == IMM_PS2)) {
896 w_ctr(ppb, 0x4);
897 w_ctr(ppb, 0xc);
898 w_ctr(ppb, 0xe);
899 w_ctr(ppb, 0x4);
900 }
901 return 0; /* Finished */
902 break;
903
904 default:
905 printk("imm: Invalid scsi phase\n");
906 }
907 return 0;
908}
909
Jeff Garzikf2812332010-11-16 02:10:29 -0500910static int imm_queuecommand_lck(struct scsi_cmnd *cmd,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700911 void (*done)(struct scsi_cmnd *))
912{
913 imm_struct *dev = imm_dev(cmd->device->host);
914
915 if (dev->cur_cmd) {
916 printk("IMM: bug in imm_queuecommand\n");
917 return 0;
918 }
919 dev->failed = 0;
920 dev->jstart = jiffies;
921 dev->cur_cmd = cmd;
922 cmd->scsi_done = done;
923 cmd->result = DID_ERROR << 16; /* default return code */
924 cmd->SCp.phase = 0; /* bus free */
925
David Howellsc4028952006-11-22 14:57:56 +0000926 schedule_delayed_work(&dev->imm_tq, 0);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700927
928 imm_pb_claim(dev);
929
930 return 0;
931}
932
Jeff Garzikf2812332010-11-16 02:10:29 -0500933static DEF_SCSI_QCMD(imm_queuecommand)
934
Linus Torvalds1da177e2005-04-16 15:20:36 -0700935/*
936 * Apparently the disk->capacity attribute is off by 1 sector
937 * for all disk drives. We add the one here, but it should really
938 * be done in sd.c. Even if it gets fixed there, this will still
939 * work.
940 */
941static int imm_biosparam(struct scsi_device *sdev, struct block_device *dev,
942 sector_t capacity, int ip[])
943{
944 ip[0] = 0x40;
945 ip[1] = 0x20;
946 ip[2] = ((unsigned long) capacity + 1) / (ip[0] * ip[1]);
947 if (ip[2] > 1024) {
948 ip[0] = 0xff;
949 ip[1] = 0x3f;
950 ip[2] = ((unsigned long) capacity + 1) / (ip[0] * ip[1]);
951 }
952 return 0;
953}
954
955static int imm_abort(struct scsi_cmnd *cmd)
956{
957 imm_struct *dev = imm_dev(cmd->device->host);
958 /*
959 * There is no method for aborting commands since Iomega
960 * have tied the SCSI_MESSAGE line high in the interface
961 */
962
963 switch (cmd->SCp.phase) {
964 case 0: /* Do not have access to parport */
965 case 1: /* Have not connected to interface */
966 dev->cur_cmd = NULL; /* Forget the problem */
967 return SUCCESS;
968 break;
969 default: /* SCSI command sent, can not abort */
970 return FAILED;
971 break;
972 }
973}
974
975static void imm_reset_pulse(unsigned int base)
976{
977 w_ctr(base, 0x04);
978 w_dtr(base, 0x40);
979 udelay(1);
980 w_ctr(base, 0x0c);
981 w_ctr(base, 0x0d);
982 udelay(50);
983 w_ctr(base, 0x0c);
984 w_ctr(base, 0x04);
985}
986
987static int imm_reset(struct scsi_cmnd *cmd)
988{
989 imm_struct *dev = imm_dev(cmd->device->host);
990
991 if (cmd->SCp.phase)
992 imm_disconnect(dev);
993 dev->cur_cmd = NULL; /* Forget the problem */
994
995 imm_connect(dev, CONNECT_NORMAL);
996 imm_reset_pulse(dev->base);
Jeff Garzik 68b3aa72005-05-28 07:56:31 -0400997 mdelay(1); /* device settle delay */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700998 imm_disconnect(dev);
Jeff Garzik 68b3aa72005-05-28 07:56:31 -0400999 mdelay(1); /* device settle delay */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001000 return SUCCESS;
1001}
1002
1003static int device_check(imm_struct *dev)
1004{
1005 /* This routine looks for a device and then attempts to use EPP
1006 to send a command. If all goes as planned then EPP is available. */
1007
1008 static char cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
1009 int loop, old_mode, status, k, ppb = dev->base;
1010 unsigned char l;
1011
1012 old_mode = dev->mode;
1013 for (loop = 0; loop < 8; loop++) {
1014 /* Attempt to use EPP for Test Unit Ready */
1015 if ((ppb & 0x0007) == 0x0000)
1016 dev->mode = IMM_EPP_32;
1017
1018 second_pass:
1019 imm_connect(dev, CONNECT_EPP_MAYBE);
1020 /* Select SCSI device */
1021 if (!imm_select(dev, loop)) {
1022 imm_disconnect(dev);
1023 continue;
1024 }
1025 printk("imm: Found device at ID %i, Attempting to use %s\n",
1026 loop, IMM_MODE_STRING[dev->mode]);
1027
1028 /* Send SCSI command */
1029 status = 1;
1030 w_ctr(ppb, 0x0c);
1031 for (l = 0; (l < 3) && (status); l++)
1032 status = imm_out(dev, &cmd[l << 1], 2);
1033
1034 if (!status) {
1035 imm_disconnect(dev);
1036 imm_connect(dev, CONNECT_EPP_MAYBE);
1037 imm_reset_pulse(dev->base);
1038 udelay(1000);
1039 imm_disconnect(dev);
1040 udelay(1000);
1041 if (dev->mode == IMM_EPP_32) {
1042 dev->mode = old_mode;
1043 goto second_pass;
1044 }
1045 printk("imm: Unable to establish communication\n");
1046 return -EIO;
1047 }
1048 w_ctr(ppb, 0x0c);
1049
1050 k = 1000000; /* 1 Second */
1051 do {
1052 l = r_str(ppb);
1053 k--;
1054 udelay(1);
1055 } while (!(l & 0x80) && (k));
1056
1057 l &= 0xb8;
1058
1059 if (l != 0xb8) {
1060 imm_disconnect(dev);
1061 imm_connect(dev, CONNECT_EPP_MAYBE);
1062 imm_reset_pulse(dev->base);
1063 udelay(1000);
1064 imm_disconnect(dev);
1065 udelay(1000);
1066 if (dev->mode == IMM_EPP_32) {
1067 dev->mode = old_mode;
1068 goto second_pass;
1069 }
1070 printk
1071 ("imm: Unable to establish communication\n");
1072 return -EIO;
1073 }
1074 imm_disconnect(dev);
1075 printk
1076 ("imm: Communication established at 0x%x with ID %i using %s\n",
1077 ppb, loop, IMM_MODE_STRING[dev->mode]);
1078 imm_connect(dev, CONNECT_EPP_MAYBE);
1079 imm_reset_pulse(dev->base);
1080 udelay(1000);
1081 imm_disconnect(dev);
1082 udelay(1000);
1083 return 0;
1084 }
1085 printk("imm: No devices found\n");
1086 return -ENODEV;
1087}
1088
Randy Dunlap979dca32006-05-19 11:55:58 -07001089/*
1090 * imm cannot deal with highmem, so this causes all IO pages for this host
1091 * to reside in low memory (hence mapped)
1092 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001093static int imm_adjust_queue(struct scsi_device *device)
1094{
1095 blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
1096 return 0;
1097}
1098
1099static struct scsi_host_template imm_template = {
1100 .module = THIS_MODULE,
1101 .proc_name = "imm",
Al Virofa5fd362013-03-31 00:55:40 -04001102 .show_info = imm_show_info,
1103 .write_info = imm_write_info,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001104 .name = "Iomega VPI2 (imm) interface",
1105 .queuecommand = imm_queuecommand,
1106 .eh_abort_handler = imm_abort,
1107 .eh_bus_reset_handler = imm_reset,
1108 .eh_host_reset_handler = imm_reset,
1109 .bios_param = imm_biosparam,
1110 .this_id = 7,
1111 .sg_tablesize = SG_ALL,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001112 .use_clustering = ENABLE_CLUSTERING,
1113 .can_queue = 1,
1114 .slave_alloc = imm_adjust_queue,
Linus Torvalds1da177e2005-04-16 15:20:36 -07001115};
1116
1117/***************************************************************************
1118 * Parallel port probing routines *
1119 ***************************************************************************/
1120
1121static LIST_HEAD(imm_hosts);
1122
1123static int __imm_attach(struct parport *pb)
1124{
1125 struct Scsi_Host *host;
1126 imm_struct *dev;
Peter Zijlstra7259f0d2006-10-29 22:46:36 -08001127 DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waiting);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001128 DEFINE_WAIT(wait);
1129 int ports;
1130 int modes, ppb;
1131 int err = -ENOMEM;
1132
1133 init_waitqueue_head(&waiting);
1134
Yoann Padioleaudd00cc42007-07-19 01:49:03 -07001135 dev = kzalloc(sizeof(imm_struct), GFP_KERNEL);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001136 if (!dev)
1137 return -ENOMEM;
1138
Linus Torvalds1da177e2005-04-16 15:20:36 -07001139
1140 dev->base = -1;
1141 dev->mode = IMM_AUTODETECT;
1142 INIT_LIST_HEAD(&dev->list);
1143
1144 dev->dev = parport_register_device(pb, "imm", NULL, imm_wakeup,
1145 NULL, 0, dev);
1146
1147 if (!dev->dev)
1148 goto out;
1149
1150
1151 /* Claim the bus so it remembers what we do to the control
1152 * registers. [ CTR and ECP ]
1153 */
1154 err = -EBUSY;
1155 dev->waiting = &waiting;
1156 prepare_to_wait(&waiting, &wait, TASK_UNINTERRUPTIBLE);
1157 if (imm_pb_claim(dev))
1158 schedule_timeout(3 * HZ);
1159 if (dev->wanted) {
1160 printk(KERN_ERR "imm%d: failed to claim parport because "
1161 "a pardevice is owning the port for too long "
1162 "time!\n", pb->number);
1163 imm_pb_dismiss(dev);
1164 dev->waiting = NULL;
1165 finish_wait(&waiting, &wait);
1166 goto out1;
1167 }
1168 dev->waiting = NULL;
1169 finish_wait(&waiting, &wait);
1170 ppb = dev->base = dev->dev->port->base;
1171 dev->base_hi = dev->dev->port->base_hi;
1172 w_ctr(ppb, 0x0c);
1173 modes = dev->dev->port->modes;
1174
1175 /* Mode detection works up the chain of speed
1176 * This avoids a nasty if-then-else-if-... tree
1177 */
1178 dev->mode = IMM_NIBBLE;
1179
1180 if (modes & PARPORT_MODE_TRISTATE)
1181 dev->mode = IMM_PS2;
1182
1183 /* Done configuration */
1184
1185 err = imm_init(dev);
1186
1187 imm_pb_release(dev);
1188
1189 if (err)
1190 goto out1;
1191
1192 /* now the glue ... */
1193 if (dev->mode == IMM_NIBBLE || dev->mode == IMM_PS2)
1194 ports = 3;
1195 else
1196 ports = 8;
1197
David Howellsc4028952006-11-22 14:57:56 +00001198 INIT_DELAYED_WORK(&dev->imm_tq, imm_interrupt);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001199
1200 err = -ENOMEM;
1201 host = scsi_host_alloc(&imm_template, sizeof(imm_struct *));
1202 if (!host)
1203 goto out1;
1204 host->io_port = pb->base;
1205 host->n_io_port = ports;
1206 host->dma_channel = -1;
1207 host->unique_id = pb->number;
1208 *(imm_struct **)&host->hostdata = dev;
1209 dev->host = host;
1210 list_add_tail(&dev->list, &imm_hosts);
1211 err = scsi_add_host(host, NULL);
1212 if (err)
1213 goto out2;
1214 scsi_scan_host(host);
1215 return 0;
1216
1217out2:
1218 list_del_init(&dev->list);
1219 scsi_host_put(host);
1220out1:
1221 parport_unregister_device(dev->dev);
1222out:
1223 kfree(dev);
1224 return err;
1225}
1226
1227static void imm_attach(struct parport *pb)
1228{
1229 __imm_attach(pb);
1230}
1231
1232static void imm_detach(struct parport *pb)
1233{
1234 imm_struct *dev;
1235 list_for_each_entry(dev, &imm_hosts, list) {
1236 if (dev->dev->port == pb) {
1237 list_del_init(&dev->list);
1238 scsi_remove_host(dev->host);
1239 scsi_host_put(dev->host);
1240 parport_unregister_device(dev->dev);
1241 kfree(dev);
1242 break;
1243 }
1244 }
1245}
1246
1247static struct parport_driver imm_driver = {
1248 .name = "imm",
1249 .attach = imm_attach,
1250 .detach = imm_detach,
1251};
1252
1253static int __init imm_driver_init(void)
1254{
1255 printk("imm: Version %s\n", IMM_VERSION);
1256 return parport_register_driver(&imm_driver);
1257}
1258
1259static void __exit imm_driver_exit(void)
1260{
1261 parport_unregister_driver(&imm_driver);
1262}
1263
1264module_init(imm_driver_init);
1265module_exit(imm_driver_exit);
1266
1267MODULE_LICENSE("GPL");