Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 1 | /* |
| 2 | * HID driver for ELO usb touchscreen 4000/4500 |
| 3 | * |
| 4 | * Copyright (c) 2013 Jiri Slaby |
| 5 | * |
| 6 | * Data parsing taken from elousb driver by Vojtech Pavlik. |
| 7 | * |
| 8 | * This driver is licensed under the terms of GPLv2. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/hid.h> |
| 12 | #include <linux/input.h> |
| 13 | #include <linux/module.h> |
Jiri Slaby | d8e5aec | 2013-05-07 11:40:59 +0200 | [diff] [blame] | 14 | #include <linux/usb.h> |
| 15 | #include <linux/workqueue.h> |
Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 16 | |
| 17 | #include "hid-ids.h" |
| 18 | |
Jiri Slaby | d8e5aec | 2013-05-07 11:40:59 +0200 | [diff] [blame] | 19 | #define ELO_PERIODIC_READ_INTERVAL HZ |
| 20 | #define ELO_SMARTSET_CMD_TIMEOUT 2000 /* msec */ |
| 21 | |
| 22 | /* Elo SmartSet commands */ |
| 23 | #define ELO_FLUSH_SMARTSET_RESPONSES 0x02 /* Flush all pending smartset responses */ |
| 24 | #define ELO_SEND_SMARTSET_COMMAND 0x05 /* Send a smartset command */ |
| 25 | #define ELO_GET_SMARTSET_RESPONSE 0x06 /* Get a smartset response */ |
| 26 | #define ELO_DIAG 0x64 /* Diagnostics command */ |
| 27 | #define ELO_SMARTSET_PACKET_SIZE 8 |
| 28 | |
| 29 | struct elo_priv { |
| 30 | struct usb_device *usbdev; |
| 31 | struct delayed_work work; |
| 32 | unsigned char buffer[ELO_SMARTSET_PACKET_SIZE]; |
| 33 | }; |
| 34 | |
| 35 | static struct workqueue_struct *wq; |
| 36 | static bool use_fw_quirk = true; |
| 37 | module_param(use_fw_quirk, bool, S_IRUGO); |
| 38 | MODULE_PARM_DESC(use_fw_quirk, "Do periodic pokes for broken M firmwares (default = true)"); |
| 39 | |
Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 40 | static void elo_input_configured(struct hid_device *hdev, |
| 41 | struct hid_input *hidinput) |
| 42 | { |
| 43 | struct input_dev *input = hidinput->input; |
| 44 | |
| 45 | set_bit(BTN_TOUCH, input->keybit); |
| 46 | set_bit(ABS_PRESSURE, input->absbit); |
| 47 | input_set_abs_params(input, ABS_PRESSURE, 0, 256, 0, 0); |
| 48 | } |
| 49 | |
| 50 | static void elo_process_data(struct input_dev *input, const u8 *data, int size) |
| 51 | { |
| 52 | int press; |
| 53 | |
| 54 | input_report_abs(input, ABS_X, (data[3] << 8) | data[2]); |
| 55 | input_report_abs(input, ABS_Y, (data[5] << 8) | data[4]); |
| 56 | |
| 57 | press = 0; |
| 58 | if (data[1] & 0x80) |
| 59 | press = (data[7] << 8) | data[6]; |
| 60 | input_report_abs(input, ABS_PRESSURE, press); |
| 61 | |
| 62 | if (data[1] & 0x03) { |
| 63 | input_report_key(input, BTN_TOUCH, 1); |
| 64 | input_sync(input); |
| 65 | } |
| 66 | |
| 67 | if (data[1] & 0x04) |
| 68 | input_report_key(input, BTN_TOUCH, 0); |
| 69 | |
| 70 | input_sync(input); |
| 71 | } |
| 72 | |
| 73 | static int elo_raw_event(struct hid_device *hdev, struct hid_report *report, |
| 74 | u8 *data, int size) |
| 75 | { |
| 76 | struct hid_input *hidinput; |
| 77 | |
| 78 | if (!(hdev->claimed & HID_CLAIMED_INPUT) || list_empty(&hdev->inputs)) |
| 79 | return 0; |
| 80 | |
| 81 | hidinput = list_first_entry(&hdev->inputs, struct hid_input, list); |
| 82 | |
| 83 | switch (report->id) { |
| 84 | case 0: |
| 85 | if (data[0] == 'T') { /* Mandatory ELO packet marker */ |
| 86 | elo_process_data(hidinput->input, data, size); |
| 87 | return 1; |
| 88 | } |
| 89 | break; |
| 90 | default: /* unknown report */ |
| 91 | /* Unknown report type; pass upstream */ |
| 92 | hid_info(hdev, "unknown report type %d\n", report->id); |
| 93 | break; |
| 94 | } |
| 95 | |
| 96 | return 0; |
| 97 | } |
| 98 | |
Jiri Slaby | d8e5aec | 2013-05-07 11:40:59 +0200 | [diff] [blame] | 99 | static int elo_smartset_send_get(struct usb_device *dev, u8 command, |
| 100 | void *data) |
| 101 | { |
| 102 | unsigned int pipe; |
| 103 | u8 dir; |
| 104 | |
| 105 | if (command == ELO_SEND_SMARTSET_COMMAND) { |
| 106 | pipe = usb_sndctrlpipe(dev, 0); |
| 107 | dir = USB_DIR_OUT; |
| 108 | } else if (command == ELO_GET_SMARTSET_RESPONSE) { |
| 109 | pipe = usb_rcvctrlpipe(dev, 0); |
| 110 | dir = USB_DIR_IN; |
| 111 | } else |
| 112 | return -EINVAL; |
| 113 | |
| 114 | return usb_control_msg(dev, pipe, command, |
| 115 | dir | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 116 | 0, 0, data, ELO_SMARTSET_PACKET_SIZE, |
| 117 | ELO_SMARTSET_CMD_TIMEOUT); |
| 118 | } |
| 119 | |
| 120 | static int elo_flush_smartset_responses(struct usb_device *dev) |
| 121 | { |
| 122 | return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), |
| 123 | ELO_FLUSH_SMARTSET_RESPONSES, |
| 124 | USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 125 | 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); |
| 126 | } |
| 127 | |
| 128 | static void elo_work(struct work_struct *work) |
| 129 | { |
| 130 | struct elo_priv *priv = container_of(work, struct elo_priv, work.work); |
| 131 | struct usb_device *dev = priv->usbdev; |
| 132 | unsigned char *buffer = priv->buffer; |
| 133 | int ret; |
| 134 | |
| 135 | ret = elo_flush_smartset_responses(dev); |
| 136 | if (ret < 0) { |
| 137 | dev_err(&dev->dev, "initial FLUSH_SMARTSET_RESPONSES failed, error %d\n", |
| 138 | ret); |
| 139 | goto fail; |
| 140 | } |
| 141 | |
| 142 | /* send Diagnostics command */ |
| 143 | *buffer = ELO_DIAG; |
| 144 | ret = elo_smartset_send_get(dev, ELO_SEND_SMARTSET_COMMAND, buffer); |
| 145 | if (ret < 0) { |
| 146 | dev_err(&dev->dev, "send Diagnostics Command failed, error %d\n", |
| 147 | ret); |
| 148 | goto fail; |
| 149 | } |
| 150 | |
| 151 | /* get the result */ |
| 152 | ret = elo_smartset_send_get(dev, ELO_GET_SMARTSET_RESPONSE, buffer); |
| 153 | if (ret < 0) { |
| 154 | dev_err(&dev->dev, "get Diagnostics Command response failed, error %d\n", |
| 155 | ret); |
| 156 | goto fail; |
| 157 | } |
| 158 | |
| 159 | /* read the ack */ |
| 160 | if (*buffer != 'A') { |
| 161 | ret = elo_smartset_send_get(dev, ELO_GET_SMARTSET_RESPONSE, |
| 162 | buffer); |
| 163 | if (ret < 0) { |
| 164 | dev_err(&dev->dev, "get acknowledge response failed, error %d\n", |
| 165 | ret); |
| 166 | goto fail; |
| 167 | } |
| 168 | } |
| 169 | |
| 170 | fail: |
| 171 | ret = elo_flush_smartset_responses(dev); |
| 172 | if (ret < 0) |
| 173 | dev_err(&dev->dev, "final FLUSH_SMARTSET_RESPONSES failed, error %d\n", |
| 174 | ret); |
| 175 | queue_delayed_work(wq, &priv->work, ELO_PERIODIC_READ_INTERVAL); |
| 176 | } |
| 177 | |
| 178 | /* |
| 179 | * Not all Elo devices need the periodic HID descriptor reads. |
| 180 | * Only firmware version M needs this. |
| 181 | */ |
| 182 | static bool elo_broken_firmware(struct usb_device *dev) |
| 183 | { |
| 184 | return use_fw_quirk && le16_to_cpu(dev->descriptor.bcdDevice) == 0x10d; |
| 185 | } |
| 186 | |
Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 187 | static int elo_probe(struct hid_device *hdev, const struct hid_device_id *id) |
| 188 | { |
Jiri Slaby | d8e5aec | 2013-05-07 11:40:59 +0200 | [diff] [blame] | 189 | struct elo_priv *priv; |
Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 190 | int ret; |
| 191 | |
Jiri Slaby | d8e5aec | 2013-05-07 11:40:59 +0200 | [diff] [blame] | 192 | priv = kzalloc(sizeof(*priv), GFP_KERNEL); |
| 193 | if (!priv) |
| 194 | return -ENOMEM; |
| 195 | |
| 196 | INIT_DELAYED_WORK(&priv->work, elo_work); |
| 197 | priv->usbdev = interface_to_usbdev(to_usb_interface(hdev->dev.parent)); |
| 198 | |
| 199 | hid_set_drvdata(hdev, priv); |
| 200 | |
Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 201 | ret = hid_parse(hdev); |
| 202 | if (ret) { |
| 203 | hid_err(hdev, "parse failed\n"); |
| 204 | goto err_free; |
| 205 | } |
| 206 | |
| 207 | ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); |
| 208 | if (ret) { |
| 209 | hid_err(hdev, "hw start failed\n"); |
| 210 | goto err_free; |
| 211 | } |
| 212 | |
Jiri Slaby | d8e5aec | 2013-05-07 11:40:59 +0200 | [diff] [blame] | 213 | if (elo_broken_firmware(priv->usbdev)) { |
| 214 | hid_info(hdev, "broken firmware found, installing workaround\n"); |
| 215 | queue_delayed_work(wq, &priv->work, ELO_PERIODIC_READ_INTERVAL); |
| 216 | } |
| 217 | |
Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 218 | return 0; |
| 219 | err_free: |
Jiri Slaby | d8e5aec | 2013-05-07 11:40:59 +0200 | [diff] [blame] | 220 | kfree(priv); |
Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 221 | return ret; |
| 222 | } |
| 223 | |
| 224 | static void elo_remove(struct hid_device *hdev) |
| 225 | { |
Jiri Slaby | d8e5aec | 2013-05-07 11:40:59 +0200 | [diff] [blame] | 226 | struct elo_priv *priv = hid_get_drvdata(hdev); |
| 227 | |
Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 228 | hid_hw_stop(hdev); |
Jiri Slaby | d8e5aec | 2013-05-07 11:40:59 +0200 | [diff] [blame] | 229 | flush_workqueue(wq); |
| 230 | kfree(priv); |
Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 231 | } |
| 232 | |
| 233 | static const struct hid_device_id elo_devices[] = { |
| 234 | { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0009), }, |
| 235 | { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0030), }, |
| 236 | { } |
| 237 | }; |
| 238 | MODULE_DEVICE_TABLE(hid, elo_devices); |
| 239 | |
| 240 | static struct hid_driver elo_driver = { |
| 241 | .name = "elo", |
| 242 | .id_table = elo_devices, |
| 243 | .probe = elo_probe, |
| 244 | .remove = elo_remove, |
| 245 | .raw_event = elo_raw_event, |
| 246 | .input_configured = elo_input_configured, |
| 247 | }; |
| 248 | |
| 249 | static int __init elo_driver_init(void) |
| 250 | { |
Jiri Slaby | d8e5aec | 2013-05-07 11:40:59 +0200 | [diff] [blame] | 251 | int ret; |
| 252 | |
| 253 | wq = create_singlethread_workqueue("elousb"); |
| 254 | if (!wq) |
| 255 | return -ENOMEM; |
| 256 | |
| 257 | ret = hid_register_driver(&elo_driver); |
| 258 | if (ret) |
| 259 | destroy_workqueue(wq); |
| 260 | |
| 261 | return ret; |
Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 262 | } |
| 263 | module_init(elo_driver_init); |
| 264 | |
| 265 | static void __exit elo_driver_exit(void) |
| 266 | { |
| 267 | hid_unregister_driver(&elo_driver); |
Jiri Slaby | d8e5aec | 2013-05-07 11:40:59 +0200 | [diff] [blame] | 268 | destroy_workqueue(wq); |
Jiri Slaby | d23efc1 | 2013-05-07 11:40:58 +0200 | [diff] [blame] | 269 | } |
| 270 | module_exit(elo_driver_exit); |
| 271 | |
| 272 | MODULE_AUTHOR("Jiri Slaby <jslaby@suse.cz>"); |
| 273 | MODULE_LICENSE("GPL"); |