Brian Murphy | 1f21d2b | 2007-08-21 22:34:16 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Atmel AT93C46 serial eeprom driver |
| 3 | * |
| 4 | * Brian Murphy <brian.murphy@eicon.com> |
| 5 | * |
| 6 | */ |
| 7 | #include <linux/kernel.h> |
| 8 | #include <linux/delay.h> |
| 9 | #include <asm/lasat/lasat.h> |
| 10 | #include <linux/module.h> |
| 11 | #include <linux/init.h> |
| 12 | |
| 13 | #include "at93c.h" |
| 14 | |
| 15 | #define AT93C_ADDR_SHIFT 7 |
| 16 | #define AT93C_ADDR_MAX ((1 << AT93C_ADDR_SHIFT) - 1) |
| 17 | #define AT93C_RCMD (0x6 << AT93C_ADDR_SHIFT) |
| 18 | #define AT93C_WCMD (0x5 << AT93C_ADDR_SHIFT) |
| 19 | #define AT93C_WENCMD 0x260 |
| 20 | #define AT93C_WDSCMD 0x200 |
| 21 | |
| 22 | struct at93c_defs *at93c; |
| 23 | |
| 24 | static void at93c_reg_write(u32 val) |
| 25 | { |
| 26 | *at93c->reg = val; |
| 27 | } |
| 28 | |
| 29 | static u32 at93c_reg_read(void) |
| 30 | { |
| 31 | u32 tmp = *at93c->reg; |
| 32 | return tmp; |
| 33 | } |
| 34 | |
| 35 | static u32 at93c_datareg_read(void) |
| 36 | { |
| 37 | u32 tmp = *at93c->rdata_reg; |
| 38 | return tmp; |
| 39 | } |
| 40 | |
| 41 | static void at93c_cycle_clk(u32 data) |
| 42 | { |
| 43 | at93c_reg_write(data | at93c->clk); |
| 44 | lasat_ndelay(250); |
| 45 | at93c_reg_write(data & ~at93c->clk); |
| 46 | lasat_ndelay(250); |
| 47 | } |
| 48 | |
| 49 | static void at93c_write_databit(u8 bit) |
| 50 | { |
| 51 | u32 data = at93c_reg_read(); |
| 52 | if (bit) |
| 53 | data |= 1 << at93c->wdata_shift; |
| 54 | else |
| 55 | data &= ~(1 << at93c->wdata_shift); |
| 56 | |
| 57 | at93c_reg_write(data); |
| 58 | lasat_ndelay(100); |
| 59 | at93c_cycle_clk(data); |
| 60 | } |
| 61 | |
| 62 | static unsigned int at93c_read_databit(void) |
| 63 | { |
| 64 | u32 data; |
| 65 | |
| 66 | at93c_cycle_clk(at93c_reg_read()); |
| 67 | data = (at93c_datareg_read() >> at93c->rdata_shift) & 1; |
| 68 | return data; |
| 69 | } |
| 70 | |
| 71 | static u8 at93c_read_byte(void) |
| 72 | { |
| 73 | int i; |
| 74 | u8 data = 0; |
| 75 | |
| 76 | for (i = 0; i <= 7; i++) { |
| 77 | data <<= 1; |
| 78 | data |= at93c_read_databit(); |
| 79 | } |
| 80 | return data; |
| 81 | } |
| 82 | |
| 83 | static void at93c_write_bits(u32 data, int size) |
| 84 | { |
| 85 | int i; |
| 86 | int shift = size - 1; |
| 87 | u32 mask = (1 << shift); |
| 88 | |
| 89 | for (i = 0; i < size; i++) { |
| 90 | at93c_write_databit((data & mask) >> shift); |
| 91 | data <<= 1; |
| 92 | } |
| 93 | } |
| 94 | |
| 95 | static void at93c_init_op(void) |
| 96 | { |
| 97 | at93c_reg_write((at93c_reg_read() | at93c->cs) & |
| 98 | ~at93c->clk & ~(1 << at93c->rdata_shift)); |
| 99 | lasat_ndelay(50); |
| 100 | } |
| 101 | |
| 102 | static void at93c_end_op(void) |
| 103 | { |
| 104 | at93c_reg_write(at93c_reg_read() & ~at93c->cs); |
| 105 | lasat_ndelay(250); |
| 106 | } |
| 107 | |
| 108 | static void at93c_wait(void) |
| 109 | { |
| 110 | at93c_init_op(); |
| 111 | while (!at93c_read_databit()) |
| 112 | ; |
| 113 | at93c_end_op(); |
| 114 | }; |
| 115 | |
| 116 | static void at93c_disable_wp(void) |
| 117 | { |
| 118 | at93c_init_op(); |
| 119 | at93c_write_bits(AT93C_WENCMD, 10); |
| 120 | at93c_end_op(); |
| 121 | } |
| 122 | |
| 123 | static void at93c_enable_wp(void) |
| 124 | { |
| 125 | at93c_init_op(); |
| 126 | at93c_write_bits(AT93C_WDSCMD, 10); |
| 127 | at93c_end_op(); |
| 128 | } |
| 129 | |
| 130 | u8 at93c_read(u8 addr) |
| 131 | { |
| 132 | u8 byte; |
| 133 | at93c_init_op(); |
| 134 | at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_RCMD, 10); |
| 135 | byte = at93c_read_byte(); |
| 136 | at93c_end_op(); |
| 137 | return byte; |
| 138 | } |
| 139 | |
| 140 | void at93c_write(u8 addr, u8 data) |
| 141 | { |
| 142 | at93c_disable_wp(); |
| 143 | at93c_init_op(); |
| 144 | at93c_write_bits((addr & AT93C_ADDR_MAX)|AT93C_WCMD, 10); |
| 145 | at93c_write_bits(data, 8); |
| 146 | at93c_end_op(); |
| 147 | at93c_wait(); |
| 148 | at93c_enable_wp(); |
| 149 | } |