blob: f86697da04d69f35733f684278f461852973e4cf [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*------------------------------------------------------------------------
2 . smc9194.c
3 . This is a driver for SMC's 9000 series of Ethernet cards.
4 .
5 . Copyright (C) 1996 by Erik Stahlman
6 . This software may be used and distributed according to the terms
7 . of the GNU General Public License, incorporated herein by reference.
8 .
9 . "Features" of the SMC chip:
10 . 4608 byte packet memory. ( for the 91C92. Others have more )
11 . EEPROM for configuration
12 . AUI/TP selection ( mine has 10Base2/10BaseT select )
13 .
14 . Arguments:
15 . io = for the base address
16 . irq = for the IRQ
17 . ifport = 0 for autodetect, 1 for TP, 2 for AUI ( or 10base2 )
18 .
19 . author:
20 . Erik Stahlman ( erik@vt.edu )
21 . contributors:
22 . Arnaldo Carvalho de Melo <acme@conectiva.com.br>
23 .
24 . Hardware multicast code from Peter Cammaert ( pc@denkart.be )
25 .
26 . Sources:
27 . o SMC databook
28 . o skeleton.c by Donald Becker ( becker@scyld.com )
29 . o ( a LOT of advice from Becker as well )
30 .
31 . History:
32 . 12/07/95 Erik Stahlman written, got receive/xmit handled
33 . 01/03/96 Erik Stahlman worked out some bugs, actually usable!!! :-)
34 . 01/06/96 Erik Stahlman cleaned up some, better testing, etc
35 . 01/29/96 Erik Stahlman fixed autoirq, added multicast
36 . 02/01/96 Erik Stahlman 1. disabled all interrupts in smc_reset
37 . 2. got rid of post-decrementing bug -- UGH.
38 . 02/13/96 Erik Stahlman Tried to fix autoirq failure. Added more
39 . descriptive error messages.
40 . 02/15/96 Erik Stahlman Fixed typo that caused detection failure
41 . 02/23/96 Erik Stahlman Modified it to fit into kernel tree
42 . Added support to change hardware address
43 . Cleared stats on opens
44 . 02/26/96 Erik Stahlman Trial support for Kernel 1.2.13
45 . Kludge for automatic IRQ detection
46 . 03/04/96 Erik Stahlman Fixed kernel 1.3.70 +
47 . Fixed bug reported by Gardner Buchanan in
48 . smc_enable, with outw instead of outb
49 . 03/06/96 Erik Stahlman Added hardware multicast from Peter Cammaert
50 . 04/14/00 Heiko Pruessing (SMA Regelsysteme) Fixed bug in chip memory
51 . allocation
52 . 08/20/00 Arnaldo Melo fix kfree(skb) in smc_hardware_send_packet
53 . 12/15/00 Christian Jullien fix "Warning: kfree_skb on hard IRQ"
54 . 11/08/01 Matt Domsch Use common crc32 function
55 ----------------------------------------------------------------------------*/
56
57static const char version[] =
58 "smc9194.c:v0.14 12/15/00 by Erik Stahlman (erik@vt.edu)\n";
59
60#include <linux/module.h>
61#include <linux/kernel.h>
62#include <linux/types.h>
63#include <linux/fcntl.h>
64#include <linux/interrupt.h>
65#include <linux/ioport.h>
66#include <linux/in.h>
67#include <linux/slab.h>
68#include <linux/string.h>
69#include <linux/init.h>
70#include <linux/crc32.h>
71#include <linux/errno.h>
72#include <linux/netdevice.h>
73#include <linux/etherdevice.h>
74#include <linux/skbuff.h>
75#include <linux/bitops.h>
76
77#include <asm/io.h>
78
79#include "smc9194.h"
80
81#define DRV_NAME "smc9194"
82
83/*------------------------------------------------------------------------
84 .
85 . Configuration options, for the experienced user to change.
86 .
87 -------------------------------------------------------------------------*/
88
89/*
90 . Do you want to use 32 bit xfers? This should work on all chips, as
91 . the chipset is designed to accommodate them.
92*/
93#ifdef __sh__
94#undef USE_32_BIT
95#else
96#define USE_32_BIT 1
97#endif
98
99#if defined(__H8300H__) || defined(__H8300S__)
100#define NO_AUTOPROBE
101#undef insl
102#undef outsl
103#define insl(a,b,l) io_insl_noswap(a,b,l)
104#define outsl(a,b,l) io_outsl_noswap(a,b,l)
105#endif
106
107/*
108 .the SMC9194 can be at any of the following port addresses. To change,
109 .for a slightly different card, you can add it to the array. Keep in
110 .mind that the array must end in zero.
111*/
112
113struct devlist {
114 unsigned int port;
115 unsigned int irq;
116};
117
118#if defined(CONFIG_H8S_EDOSK2674)
119static struct devlist smc_devlist[] __initdata = {
120 {.port = 0xf80000, .irq = 16},
121 {.port = 0, .irq = 0 },
122};
123#else
124static struct devlist smc_devlist[] __initdata = {
125 {.port = 0x200, .irq = 0},
126 {.port = 0x220, .irq = 0},
127 {.port = 0x240, .irq = 0},
128 {.port = 0x260, .irq = 0},
129 {.port = 0x280, .irq = 0},
130 {.port = 0x2A0, .irq = 0},
131 {.port = 0x2C0, .irq = 0},
132 {.port = 0x2E0, .irq = 0},
133 {.port = 0x300, .irq = 0},
134 {.port = 0x320, .irq = 0},
135 {.port = 0x340, .irq = 0},
136 {.port = 0x360, .irq = 0},
137 {.port = 0x380, .irq = 0},
138 {.port = 0x3A0, .irq = 0},
139 {.port = 0x3C0, .irq = 0},
140 {.port = 0x3E0, .irq = 0},
141 {.port = 0, .irq = 0},
142};
143#endif
144/*
145 . Wait time for memory to be free. This probably shouldn't be
146 . tuned that much, as waiting for this means nothing else happens
147 . in the system
148*/
149#define MEMORY_WAIT_TIME 16
150
151/*
152 . DEBUGGING LEVELS
153 .
154 . 0 for normal operation
155 . 1 for slightly more details
156 . >2 for various levels of increasingly useless information
157 . 2 for interrupt tracking, status flags
158 . 3 for packet dumps, etc.
159*/
160#define SMC_DEBUG 0
161
162#if (SMC_DEBUG > 2 )
163#define PRINTK3(x) printk x
164#else
165#define PRINTK3(x)
166#endif
167
168#if SMC_DEBUG > 1
169#define PRINTK2(x) printk x
170#else
171#define PRINTK2(x)
172#endif
173
174#ifdef SMC_DEBUG
175#define PRINTK(x) printk x
176#else
177#define PRINTK(x)
178#endif
179
180
181/*------------------------------------------------------------------------
182 .
183 . The internal workings of the driver. If you are changing anything
184 . here with the SMC stuff, you should have the datasheet and known
185 . what you are doing.
186 .
187 -------------------------------------------------------------------------*/
188#define CARDNAME "SMC9194"
189
190
191/* store this information for the driver.. */
192struct smc_local {
193 /*
194 these are things that the kernel wants me to keep, so users
195 can find out semi-useless statistics of how well the card is
196 performing
197 */
198 struct net_device_stats stats;
199
200 /*
201 If I have to wait until memory is available to send
202 a packet, I will store the skbuff here, until I get the
203 desired memory. Then, I'll send it out and free it.
204 */
205 struct sk_buff * saved_skb;
206
207 /*
208 . This keeps track of how many packets that I have
209 . sent out. When an TX_EMPTY interrupt comes, I know
210 . that all of these have been sent.
211 */
212 int packets_waiting;
213};
214
215
216/*-----------------------------------------------------------------
217 .
218 . The driver can be entered at any of the following entry points.
219 .
220 .------------------------------------------------------------------ */
221
222/*
223 . This is called by register_netdev(). It is responsible for
224 . checking the portlist for the SMC9000 series chipset. If it finds
225 . one, then it will initialize the device, find the hardware information,
226 . and sets up the appropriate device parameters.
227 . NOTE: Interrupts are *OFF* when this procedure is called.
228 .
229 . NB:This shouldn't be static since it is referred to externally.
230*/
231struct net_device *smc_init(int unit);
232
233/*
234 . The kernel calls this function when someone wants to use the device,
235 . typically 'ifconfig ethX up'.
236*/
237static int smc_open(struct net_device *dev);
238
239/*
240 . Our watchdog timed out. Called by the networking layer
241*/
242static void smc_timeout(struct net_device *dev);
243
244/*
245 . This is called by the kernel in response to 'ifconfig ethX down'. It
246 . is responsible for cleaning up everything that the open routine
247 . does, and maybe putting the card into a powerdown state.
248*/
249static int smc_close(struct net_device *dev);
250
251/*
252 . This routine allows the proc file system to query the driver's
253 . statistics.
254*/
255static struct net_device_stats * smc_query_statistics( struct net_device *dev);
256
257/*
258 . Finally, a call to set promiscuous mode ( for TCPDUMP and related
259 . programs ) and multicast modes.
260*/
261static void smc_set_multicast_list(struct net_device *dev);
262
263
264/*---------------------------------------------------------------
265 .
266 . Interrupt level calls..
267 .
268 ----------------------------------------------------------------*/
269
270/*
271 . Handles the actual interrupt
272*/
273static irqreturn_t smc_interrupt(int irq, void *, struct pt_regs *regs);
274/*
275 . This is a separate procedure to handle the receipt of a packet, to
276 . leave the interrupt code looking slightly cleaner
277*/
278static inline void smc_rcv( struct net_device *dev );
279/*
280 . This handles a TX interrupt, which is only called when an error
281 . relating to a packet is sent.
282*/
283static inline void smc_tx( struct net_device * dev );
284
285/*
286 ------------------------------------------------------------
287 .
288 . Internal routines
289 .
290 ------------------------------------------------------------
291*/
292
293/*
294 . Test if a given location contains a chip, trying to cause as
295 . little damage as possible if it's not a SMC chip.
296*/
297static int smc_probe(struct net_device *dev, int ioaddr);
298
299/*
300 . A rather simple routine to print out a packet for debugging purposes.
301*/
302#if SMC_DEBUG > 2
303static void print_packet( byte *, int );
304#endif
305
306#define tx_done(dev) 1
307
308/* this is called to actually send the packet to the chip */
309static void smc_hardware_send_packet( struct net_device * dev );
310
311/* Since I am not sure if I will have enough room in the chip's ram
312 . to store the packet, I call this routine, which either sends it
313 . now, or generates an interrupt when the card is ready for the
314 . packet */
315static int smc_wait_to_send_packet( struct sk_buff * skb, struct net_device *dev );
316
317/* this does a soft reset on the device */
318static void smc_reset( int ioaddr );
319
320/* Enable Interrupts, Receive, and Transmit */
321static void smc_enable( int ioaddr );
322
323/* this puts the device in an inactive state */
324static void smc_shutdown( int ioaddr );
325
326/* This routine will find the IRQ of the driver if one is not
327 . specified in the input to the device. */
328static int smc_findirq( int ioaddr );
329
330/*
331 . Function: smc_reset( int ioaddr )
332 . Purpose:
333 . This sets the SMC91xx chip to its normal state, hopefully from whatever
334 . mess that any other DOS driver has put it in.
335 .
336 . Maybe I should reset more registers to defaults in here? SOFTRESET should
337 . do that for me.
338 .
339 . Method:
340 . 1. send a SOFT RESET
341 . 2. wait for it to finish
342 . 3. enable autorelease mode
343 . 4. reset the memory management unit
344 . 5. clear all interrupts
345 .
346*/
347static void smc_reset( int ioaddr )
348{
349 /* This resets the registers mostly to defaults, but doesn't
350 affect EEPROM. That seems unnecessary */
351 SMC_SELECT_BANK( 0 );
352 outw( RCR_SOFTRESET, ioaddr + RCR );
353
354 /* this should pause enough for the chip to be happy */
355 SMC_DELAY( );
356
357 /* Set the transmit and receive configuration registers to
358 default values */
359 outw( RCR_CLEAR, ioaddr + RCR );
360 outw( TCR_CLEAR, ioaddr + TCR );
361
362 /* set the control register to automatically
363 release successfully transmitted packets, to make the best
364 use out of our limited memory */
365 SMC_SELECT_BANK( 1 );
366 outw( inw( ioaddr + CONTROL ) | CTL_AUTO_RELEASE , ioaddr + CONTROL );
367
368 /* Reset the MMU */
369 SMC_SELECT_BANK( 2 );
370 outw( MC_RESET, ioaddr + MMU_CMD );
371
372 /* Note: It doesn't seem that waiting for the MMU busy is needed here,
373 but this is a place where future chipsets _COULD_ break. Be wary
374 of issuing another MMU command right after this */
375
376 outb( 0, ioaddr + INT_MASK );
377}
378
379/*
380 . Function: smc_enable
381 . Purpose: let the chip talk to the outside work
382 . Method:
383 . 1. Enable the transmitter
384 . 2. Enable the receiver
385 . 3. Enable interrupts
386*/
387static void smc_enable( int ioaddr )
388{
389 SMC_SELECT_BANK( 0 );
390 /* see the header file for options in TCR/RCR NORMAL*/
391 outw( TCR_NORMAL, ioaddr + TCR );
392 outw( RCR_NORMAL, ioaddr + RCR );
393
394 /* now, enable interrupts */
395 SMC_SELECT_BANK( 2 );
396 outb( SMC_INTERRUPT_MASK, ioaddr + INT_MASK );
397}
398
399/*
400 . Function: smc_shutdown
401 . Purpose: closes down the SMC91xxx chip.
402 . Method:
403 . 1. zero the interrupt mask
404 . 2. clear the enable receive flag
405 . 3. clear the enable xmit flags
406 .
407 . TODO:
408 . (1) maybe utilize power down mode.
409 . Why not yet? Because while the chip will go into power down mode,
410 . the manual says that it will wake up in response to any I/O requests
411 . in the register space. Empirical results do not show this working.
412*/
413static void smc_shutdown( int ioaddr )
414{
415 /* no more interrupts for me */
416 SMC_SELECT_BANK( 2 );
417 outb( 0, ioaddr + INT_MASK );
418
419 /* and tell the card to stay away from that nasty outside world */
420 SMC_SELECT_BANK( 0 );
421 outb( RCR_CLEAR, ioaddr + RCR );
422 outb( TCR_CLEAR, ioaddr + TCR );
423#if 0
424 /* finally, shut the chip down */
425 SMC_SELECT_BANK( 1 );
426 outw( inw( ioaddr + CONTROL ), CTL_POWERDOWN, ioaddr + CONTROL );
427#endif
428}
429
430
431/*
432 . Function: smc_setmulticast( int ioaddr, int count, dev_mc_list * adds )
433 . Purpose:
434 . This sets the internal hardware table to filter out unwanted multicast
435 . packets before they take up memory.
436 .
437 . The SMC chip uses a hash table where the high 6 bits of the CRC of
438 . address are the offset into the table. If that bit is 1, then the
439 . multicast packet is accepted. Otherwise, it's dropped silently.
440 .
441 . To use the 6 bits as an offset into the table, the high 3 bits are the
442 . number of the 8 bit register, while the low 3 bits are the bit within
443 . that register.
444 .
445 . This routine is based very heavily on the one provided by Peter Cammaert.
446*/
447
448
449static void smc_setmulticast( int ioaddr, int count, struct dev_mc_list * addrs ) {
450 int i;
451 unsigned char multicast_table[ 8 ];
452 struct dev_mc_list * cur_addr;
453 /* table for flipping the order of 3 bits */
454 unsigned char invert3[] = { 0, 4, 2, 6, 1, 5, 3, 7 };
455
456 /* start with a table of all zeros: reject all */
457 memset( multicast_table, 0, sizeof( multicast_table ) );
458
459 cur_addr = addrs;
460 for ( i = 0; i < count ; i ++, cur_addr = cur_addr->next ) {
461 int position;
462
463 /* do we have a pointer here? */
464 if ( !cur_addr )
465 break;
466 /* make sure this is a multicast address - shouldn't this
467 be a given if we have it here ? */
468 if ( !( *cur_addr->dmi_addr & 1 ) )
469 continue;
470
471 /* only use the low order bits */
472 position = ether_crc_le(6, cur_addr->dmi_addr) & 0x3f;
473
474 /* do some messy swapping to put the bit in the right spot */
475 multicast_table[invert3[position&7]] |=
476 (1<<invert3[(position>>3)&7]);
477
478 }
479 /* now, the table can be loaded into the chipset */
480 SMC_SELECT_BANK( 3 );
481
482 for ( i = 0; i < 8 ; i++ ) {
483 outb( multicast_table[i], ioaddr + MULTICAST1 + i );
484 }
485}
486
487/*
488 . Function: smc_wait_to_send_packet( struct sk_buff * skb, struct net_device * )
489 . Purpose:
490 . Attempt to allocate memory for a packet, if chip-memory is not
491 . available, then tell the card to generate an interrupt when it
492 . is available.
493 .
494 . Algorithm:
495 .
496 . o if the saved_skb is not currently null, then drop this packet
497 . on the floor. This should never happen, because of TBUSY.
498 . o if the saved_skb is null, then replace it with the current packet,
499 . o See if I can sending it now.
500 . o (NO): Enable interrupts and let the interrupt handler deal with it.
501 . o (YES):Send it now.
502*/
503static int smc_wait_to_send_packet( struct sk_buff * skb, struct net_device * dev )
504{
505 struct smc_local *lp = netdev_priv(dev);
506 unsigned int ioaddr = dev->base_addr;
507 word length;
508 unsigned short numPages;
509 word time_out;
510
511 netif_stop_queue(dev);
512 /* Well, I want to send the packet.. but I don't know
513 if I can send it right now... */
514
515 if ( lp->saved_skb) {
516 /* THIS SHOULD NEVER HAPPEN. */
517 lp->stats.tx_aborted_errors++;
518 printk(CARDNAME": Bad Craziness - sent packet while busy.\n" );
519 return 1;
520 }
521 lp->saved_skb = skb;
522
523 length = skb->len;
524
525 if (length < ETH_ZLEN) {
526 skb = skb_padto(skb, ETH_ZLEN);
527 if (skb == NULL) {
528 netif_wake_queue(dev);
529 return 0;
530 }
531 length = ETH_ZLEN;
532 }
533
534 /*
535 ** The MMU wants the number of pages to be the number of 256 bytes
536 ** 'pages', minus 1 ( since a packet can't ever have 0 pages :) )
537 **
538 ** Pkt size for allocating is data length +6 (for additional status words,
539 ** length and ctl!) If odd size last byte is included in this header.
540 */
541 numPages = ((length & 0xfffe) + 6) / 256;
542
543 if (numPages > 7 ) {
544 printk(CARDNAME": Far too big packet error. \n");
545 /* freeing the packet is a good thing here... but should
546 . any packets of this size get down here? */
547 dev_kfree_skb (skb);
548 lp->saved_skb = NULL;
549 /* this IS an error, but, i don't want the skb saved */
550 netif_wake_queue(dev);
551 return 0;
552 }
553 /* either way, a packet is waiting now */
554 lp->packets_waiting++;
555
556 /* now, try to allocate the memory */
557 SMC_SELECT_BANK( 2 );
558 outw( MC_ALLOC | numPages, ioaddr + MMU_CMD );
559 /*
560 . Performance Hack
561 .
562 . wait a short amount of time.. if I can send a packet now, I send
563 . it now. Otherwise, I enable an interrupt and wait for one to be
564 . available.
565 .
566 . I could have handled this a slightly different way, by checking to
567 . see if any memory was available in the FREE MEMORY register. However,
568 . either way, I need to generate an allocation, and the allocation works
569 . no matter what, so I saw no point in checking free memory.
570 */
571 time_out = MEMORY_WAIT_TIME;
572 do {
573 word status;
574
575 status = inb( ioaddr + INTERRUPT );
576 if ( status & IM_ALLOC_INT ) {
577 /* acknowledge the interrupt */
578 outb( IM_ALLOC_INT, ioaddr + INTERRUPT );
579 break;
580 }
581 } while ( -- time_out );
582
583 if ( !time_out ) {
584 /* oh well, wait until the chip finds memory later */
585 SMC_ENABLE_INT( IM_ALLOC_INT );
586 PRINTK2((CARDNAME": memory allocation deferred. \n"));
587 /* it's deferred, but I'll handle it later */
588 return 0;
589 }
590 /* or YES! I can send the packet now.. */
591 smc_hardware_send_packet(dev);
592 netif_wake_queue(dev);
593 return 0;
594}
595
596/*
597 . Function: smc_hardware_send_packet(struct net_device * )
598 . Purpose:
599 . This sends the actual packet to the SMC9xxx chip.
600 .
601 . Algorithm:
602 . First, see if a saved_skb is available.
603 . ( this should NOT be called if there is no 'saved_skb'
604 . Now, find the packet number that the chip allocated
605 . Point the data pointers at it in memory
606 . Set the length word in the chip's memory
607 . Dump the packet to chip memory
608 . Check if a last byte is needed ( odd length packet )
609 . if so, set the control flag right
610 . Tell the card to send it
611 . Enable the transmit interrupt, so I know if it failed
612 . Free the kernel data if I actually sent it.
613*/
614static void smc_hardware_send_packet( struct net_device * dev )
615{
616 struct smc_local *lp = netdev_priv(dev);
617 byte packet_no;
618 struct sk_buff * skb = lp->saved_skb;
619 word length;
620 unsigned int ioaddr;
621 byte * buf;
622
623 ioaddr = dev->base_addr;
624
625 if ( !skb ) {
626 PRINTK((CARDNAME": In XMIT with no packet to send \n"));
627 return;
628 }
629 length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
630 buf = skb->data;
631
632 /* If I get here, I _know_ there is a packet slot waiting for me */
633 packet_no = inb( ioaddr + PNR_ARR + 1 );
634 if ( packet_no & 0x80 ) {
635 /* or isn't there? BAD CHIP! */
636 printk(KERN_DEBUG CARDNAME": Memory allocation failed. \n");
637 dev_kfree_skb_any(skb);
638 lp->saved_skb = NULL;
639 netif_wake_queue(dev);
640 return;
641 }
642
643 /* we have a packet address, so tell the card to use it */
644 outb( packet_no, ioaddr + PNR_ARR );
645
646 /* point to the beginning of the packet */
647 outw( PTR_AUTOINC , ioaddr + POINTER );
648
649 PRINTK3((CARDNAME": Trying to xmit packet of length %x\n", length ));
650#if SMC_DEBUG > 2
651 print_packet( buf, length );
652#endif
653
654 /* send the packet length ( +6 for status, length and ctl byte )
655 and the status word ( set to zeros ) */
656#ifdef USE_32_BIT
657 outl( (length +6 ) << 16 , ioaddr + DATA_1 );
658#else
659 outw( 0, ioaddr + DATA_1 );
660 /* send the packet length ( +6 for status words, length, and ctl*/
661 outb( (length+6) & 0xFF,ioaddr + DATA_1 );
662 outb( (length+6) >> 8 , ioaddr + DATA_1 );
663#endif
664
665 /* send the actual data
666 . I _think_ it's faster to send the longs first, and then
667 . mop up by sending the last word. It depends heavily
668 . on alignment, at least on the 486. Maybe it would be
669 . a good idea to check which is optimal? But that could take
670 . almost as much time as is saved?
671 */
672#ifdef USE_32_BIT
673 if ( length & 0x2 ) {
674 outsl(ioaddr + DATA_1, buf, length >> 2 );
675#if !defined(__H8300H__) && !defined(__H8300S__)
676 outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
677#else
678 ctrl_outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1);
679#endif
680 }
681 else
682 outsl(ioaddr + DATA_1, buf, length >> 2 );
683#else
684 outsw(ioaddr + DATA_1 , buf, (length ) >> 1);
685#endif
686 /* Send the last byte, if there is one. */
687
688 if ( (length & 1) == 0 ) {
689 outw( 0, ioaddr + DATA_1 );
690 } else {
691 outb( buf[length -1 ], ioaddr + DATA_1 );
692 outb( 0x20, ioaddr + DATA_1);
693 }
694
695 /* enable the interrupts */
696 SMC_ENABLE_INT( (IM_TX_INT | IM_TX_EMPTY_INT) );
697
698 /* and let the chipset deal with it */
699 outw( MC_ENQUEUE , ioaddr + MMU_CMD );
700
701 PRINTK2((CARDNAME": Sent packet of length %d \n",length));
702
703 lp->saved_skb = NULL;
704 dev_kfree_skb_any (skb);
705
706 dev->trans_start = jiffies;
707
708 /* we can send another packet */
709 netif_wake_queue(dev);
710
711 return;
712}
713
714/*-------------------------------------------------------------------------
715 |
716 | smc_init(int unit)
717 | Input parameters:
718 | dev->base_addr == 0, try to find all possible locations
719 | dev->base_addr == 1, return failure code
720 | dev->base_addr == 2, always allocate space, and return success
721 | dev->base_addr == <anything else> this is the address to check
722 |
723 | Output:
724 | pointer to net_device or ERR_PTR(error)
725 |
726 ---------------------------------------------------------------------------
727*/
728static int io;
729static int irq;
730static int ifport;
731
732struct net_device * __init smc_init(int unit)
733{
734 struct net_device *dev = alloc_etherdev(sizeof(struct smc_local));
735 static struct devlist *smcdev = smc_devlist;
736 int err = 0;
737
738#ifndef NO_AUTOPROBE
739 smcdev = smc_devlist;
740#endif
741 if (!dev)
742 return ERR_PTR(-ENODEV);
743
744 if (unit >= 0) {
745 sprintf(dev->name, "eth%d", unit);
746 netdev_boot_setup_check(dev);
747 io = dev->base_addr;
748 irq = dev->irq;
749 }
750
751 SET_MODULE_OWNER(dev);
752
753 if (io > 0x1ff) { /* Check a single specified location. */
754 err = smc_probe(dev, io);
755 } else if (io != 0) { /* Don't probe at all. */
756 err = -ENXIO;
757 } else {
758 for (;smcdev->port; smcdev++) {
759 if (smc_probe(dev, smcdev->port) == 0)
760 break;
761 }
762 if (!smcdev->port)
763 err = -ENODEV;
764 }
765 if (err)
766 goto out;
767 err = register_netdev(dev);
768 if (err)
769 goto out1;
770 return dev;
771out1:
772 free_irq(dev->irq, dev);
773 release_region(dev->base_addr, SMC_IO_EXTENT);
774out:
775 free_netdev(dev);
776 return ERR_PTR(err);
777}
778
779/*----------------------------------------------------------------------
780 . smc_findirq
781 .
782 . This routine has a simple purpose -- make the SMC chip generate an
783 . interrupt, so an auto-detect routine can detect it, and find the IRQ,
784 ------------------------------------------------------------------------
785*/
786int __init smc_findirq( int ioaddr )
787{
788#ifndef NO_AUTOPROBE
789 int timeout = 20;
790 unsigned long cookie;
791
792
793 cookie = probe_irq_on();
794
795 /*
796 * What I try to do here is trigger an ALLOC_INT. This is done
797 * by allocating a small chunk of memory, which will give an interrupt
798 * when done.
799 */
800
801
802 SMC_SELECT_BANK(2);
803 /* enable ALLOCation interrupts ONLY */
804 outb( IM_ALLOC_INT, ioaddr + INT_MASK );
805
806 /*
807 . Allocate 512 bytes of memory. Note that the chip was just
808 . reset so all the memory is available
809 */
810 outw( MC_ALLOC | 1, ioaddr + MMU_CMD );
811
812 /*
813 . Wait until positive that the interrupt has been generated
814 */
815 while ( timeout ) {
816 byte int_status;
817
818 int_status = inb( ioaddr + INTERRUPT );
819
820 if ( int_status & IM_ALLOC_INT )
821 break; /* got the interrupt */
822 timeout--;
823 }
824 /* there is really nothing that I can do here if timeout fails,
825 as probe_irq_off will return a 0 anyway, which is what I
826 want in this case. Plus, the clean up is needed in both
827 cases. */
828
829 /* DELAY HERE!
830 On a fast machine, the status might change before the interrupt
831 is given to the processor. This means that the interrupt was
832 never detected, and probe_irq_off fails to report anything.
833 This should fix probe_irq_* problems.
834 */
835 SMC_DELAY();
836 SMC_DELAY();
837
838 /* and disable all interrupts again */
839 outb( 0, ioaddr + INT_MASK );
840
841 /* and return what I found */
842 return probe_irq_off(cookie);
843#else /* NO_AUTOPROBE */
844 struct devlist *smcdev;
845 for (smcdev = smc_devlist; smcdev->port; smcdev++) {
846 if (smcdev->port == ioaddr)
847 return smcdev->irq;
848 }
849 return 0;
850#endif
851}
852
853/*----------------------------------------------------------------------
854 . Function: smc_probe( int ioaddr )
855 .
856 . Purpose:
857 . Tests to see if a given ioaddr points to an SMC9xxx chip.
858 . Returns a 0 on success
859 .
860 . Algorithm:
861 . (1) see if the high byte of BANK_SELECT is 0x33
862 . (2) compare the ioaddr with the base register's address
863 . (3) see if I recognize the chip ID in the appropriate register
864 .
865 .---------------------------------------------------------------------
866 */
867
868/*---------------------------------------------------------------
869 . Here I do typical initialization tasks.
870 .
871 . o Initialize the structure if needed
872 . o print out my vanity message if not done so already
873 . o print out what type of hardware is detected
874 . o print out the ethernet address
875 . o find the IRQ
876 . o set up my private data
877 . o configure the dev structure with my subroutines
878 . o actually GRAB the irq.
879 . o GRAB the region
880 .-----------------------------------------------------------------
881*/
882static int __init smc_probe(struct net_device *dev, int ioaddr)
883{
884 int i, memory, retval;
885 static unsigned version_printed;
886 unsigned int bank;
887
888 const char *version_string;
889 const char *if_string;
890
891 /* registers */
892 word revision_register;
893 word base_address_register;
894 word configuration_register;
895 word memory_info_register;
896 word memory_cfg_register;
897
898 /* Grab the region so that no one else tries to probe our ioports. */
899 if (!request_region(ioaddr, SMC_IO_EXTENT, DRV_NAME))
900 return -EBUSY;
901
902 dev->irq = irq;
903 dev->if_port = ifport;
904
905 /* First, see if the high byte is 0x33 */
906 bank = inw( ioaddr + BANK_SELECT );
907 if ( (bank & 0xFF00) != 0x3300 ) {
908 retval = -ENODEV;
909 goto err_out;
910 }
911 /* The above MIGHT indicate a device, but I need to write to further
912 test this. */
913 outw( 0x0, ioaddr + BANK_SELECT );
914 bank = inw( ioaddr + BANK_SELECT );
915 if ( (bank & 0xFF00 ) != 0x3300 ) {
916 retval = -ENODEV;
917 goto err_out;
918 }
919#if !defined(CONFIG_H8S_EDOSK2674)
920 /* well, we've already written once, so hopefully another time won't
921 hurt. This time, I need to switch the bank register to bank 1,
922 so I can access the base address register */
923 SMC_SELECT_BANK(1);
924 base_address_register = inw( ioaddr + BASE );
925 if ( ioaddr != ( base_address_register >> 3 & 0x3E0 ) ) {
926 printk(CARDNAME ": IOADDR %x doesn't match configuration (%x)."
927 "Probably not a SMC chip\n",
928 ioaddr, base_address_register >> 3 & 0x3E0 );
929 /* well, the base address register didn't match. Must not have
930 been a SMC chip after all. */
931 retval = -ENODEV;
932 goto err_out;
933 }
934#else
935 (void)base_address_register; /* Warning suppression */
936#endif
937
938
939 /* check if the revision register is something that I recognize.
940 These might need to be added to later, as future revisions
941 could be added. */
942 SMC_SELECT_BANK(3);
943 revision_register = inw( ioaddr + REVISION );
944 if ( !chip_ids[ ( revision_register >> 4 ) & 0xF ] ) {
945 /* I don't recognize this chip, so... */
946 printk(CARDNAME ": IO %x: Unrecognized revision register:"
947 " %x, Contact author. \n", ioaddr, revision_register );
948
949 retval = -ENODEV;
950 goto err_out;
951 }
952
953 /* at this point I'll assume that the chip is an SMC9xxx.
954 It might be prudent to check a listing of MAC addresses
955 against the hardware address, or do some other tests. */
956
957 if (version_printed++ == 0)
958 printk("%s", version);
959
960 /* fill in some of the fields */
961 dev->base_addr = ioaddr;
962
963 /*
964 . Get the MAC address ( bank 1, regs 4 - 9 )
965 */
966 SMC_SELECT_BANK( 1 );
967 for ( i = 0; i < 6; i += 2 ) {
968 word address;
969
970 address = inw( ioaddr + ADDR0 + i );
971 dev->dev_addr[ i + 1] = address >> 8;
972 dev->dev_addr[ i ] = address & 0xFF;
973 }
974
975 /* get the memory information */
976
977 SMC_SELECT_BANK( 0 );
978 memory_info_register = inw( ioaddr + MIR );
979 memory_cfg_register = inw( ioaddr + MCR );
980 memory = ( memory_cfg_register >> 9 ) & 0x7; /* multiplier */
981 memory *= 256 * ( memory_info_register & 0xFF );
982
983 /*
984 Now, I want to find out more about the chip. This is sort of
985 redundant, but it's cleaner to have it in both, rather than having
986 one VERY long probe procedure.
987 */
988 SMC_SELECT_BANK(3);
989 revision_register = inw( ioaddr + REVISION );
990 version_string = chip_ids[ ( revision_register >> 4 ) & 0xF ];
991 if ( !version_string ) {
992 /* I shouldn't get here because this call was done before.... */
993 retval = -ENODEV;
994 goto err_out;
995 }
996
997 /* is it using AUI or 10BaseT ? */
998 if ( dev->if_port == 0 ) {
999 SMC_SELECT_BANK(1);
1000 configuration_register = inw( ioaddr + CONFIG );
1001 if ( configuration_register & CFG_AUI_SELECT )
1002 dev->if_port = 2;
1003 else
1004 dev->if_port = 1;
1005 }
1006 if_string = interfaces[ dev->if_port - 1 ];
1007
1008 /* now, reset the chip, and put it into a known state */
1009 smc_reset( ioaddr );
1010
1011 /*
1012 . If dev->irq is 0, then the device has to be banged on to see
1013 . what the IRQ is.
1014 .
1015 . This banging doesn't always detect the IRQ, for unknown reasons.
1016 . a workaround is to reset the chip and try again.
1017 .
1018 . Interestingly, the DOS packet driver *SETS* the IRQ on the card to
1019 . be what is requested on the command line. I don't do that, mostly
1020 . because the card that I have uses a non-standard method of accessing
1021 . the IRQs, and because this _should_ work in most configurations.
1022 .
1023 . Specifying an IRQ is done with the assumption that the user knows
1024 . what (s)he is doing. No checking is done!!!!
1025 .
1026 */
1027 if ( dev->irq < 2 ) {
1028 int trials;
1029
1030 trials = 3;
1031 while ( trials-- ) {
1032 dev->irq = smc_findirq( ioaddr );
1033 if ( dev->irq )
1034 break;
1035 /* kick the card and try again */
1036 smc_reset( ioaddr );
1037 }
1038 }
1039 if (dev->irq == 0 ) {
1040 printk(CARDNAME": Couldn't autodetect your IRQ. Use irq=xx.\n");
1041 retval = -ENODEV;
1042 goto err_out;
1043 }
1044
1045 /* now, print out the card info, in a short format.. */
1046
1047 printk("%s: %s(r:%d) at %#3x IRQ:%d INTF:%s MEM:%db ", dev->name,
1048 version_string, revision_register & 0xF, ioaddr, dev->irq,
1049 if_string, memory );
1050 /*
1051 . Print the Ethernet address
1052 */
1053 printk("ADDR: ");
1054 for (i = 0; i < 5; i++)
1055 printk("%2.2x:", dev->dev_addr[i] );
1056 printk("%2.2x \n", dev->dev_addr[5] );
1057
1058 /* set the private data to zero by default */
1059 memset(dev->priv, 0, sizeof(struct smc_local));
1060
1061 /* Grab the IRQ */
1062 retval = request_irq(dev->irq, &smc_interrupt, 0, DRV_NAME, dev);
1063 if (retval) {
1064 printk("%s: unable to get IRQ %d (irqval=%d).\n", DRV_NAME,
1065 dev->irq, retval);
1066 goto err_out;
1067 }
1068
1069 dev->open = smc_open;
1070 dev->stop = smc_close;
1071 dev->hard_start_xmit = smc_wait_to_send_packet;
1072 dev->tx_timeout = smc_timeout;
1073 dev->watchdog_timeo = HZ/20;
1074 dev->get_stats = smc_query_statistics;
1075 dev->set_multicast_list = smc_set_multicast_list;
1076
1077 return 0;
1078
1079err_out:
1080 release_region(ioaddr, SMC_IO_EXTENT);
1081 return retval;
1082}
1083
1084#if SMC_DEBUG > 2
1085static void print_packet( byte * buf, int length )
1086{
1087#if 0
1088 int i;
1089 int remainder;
1090 int lines;
1091
1092 printk("Packet of length %d \n", length );
1093 lines = length / 16;
1094 remainder = length % 16;
1095
1096 for ( i = 0; i < lines ; i ++ ) {
1097 int cur;
1098
1099 for ( cur = 0; cur < 8; cur ++ ) {
1100 byte a, b;
1101
1102 a = *(buf ++ );
1103 b = *(buf ++ );
1104 printk("%02x%02x ", a, b );
1105 }
1106 printk("\n");
1107 }
1108 for ( i = 0; i < remainder/2 ; i++ ) {
1109 byte a, b;
1110
1111 a = *(buf ++ );
1112 b = *(buf ++ );
1113 printk("%02x%02x ", a, b );
1114 }
1115 printk("\n");
1116#endif
1117}
1118#endif
1119
1120
1121/*
1122 * Open and Initialize the board
1123 *
1124 * Set up everything, reset the card, etc ..
1125 *
1126 */
1127static int smc_open(struct net_device *dev)
1128{
1129 int ioaddr = dev->base_addr;
1130
1131 int i; /* used to set hw ethernet address */
1132
1133 /* clear out all the junk that was put here before... */
1134 memset(dev->priv, 0, sizeof(struct smc_local));
1135
1136 /* reset the hardware */
1137
1138 smc_reset( ioaddr );
1139 smc_enable( ioaddr );
1140
1141 /* Select which interface to use */
1142
1143 SMC_SELECT_BANK( 1 );
1144 if ( dev->if_port == 1 ) {
1145 outw( inw( ioaddr + CONFIG ) & ~CFG_AUI_SELECT,
1146 ioaddr + CONFIG );
1147 }
1148 else if ( dev->if_port == 2 ) {
1149 outw( inw( ioaddr + CONFIG ) | CFG_AUI_SELECT,
1150 ioaddr + CONFIG );
1151 }
1152
1153 /*
1154 According to Becker, I have to set the hardware address
1155 at this point, because the (l)user can set it with an
1156 ioctl. Easily done...
1157 */
1158 SMC_SELECT_BANK( 1 );
1159 for ( i = 0; i < 6; i += 2 ) {
1160 word address;
1161
1162 address = dev->dev_addr[ i + 1 ] << 8 ;
1163 address |= dev->dev_addr[ i ];
1164 outw( address, ioaddr + ADDR0 + i );
1165 }
1166
1167 netif_start_queue(dev);
1168 return 0;
1169}
1170
1171/*--------------------------------------------------------
1172 . Called by the kernel to send a packet out into the void
1173 . of the net. This routine is largely based on
1174 . skeleton.c, from Becker.
1175 .--------------------------------------------------------
1176*/
1177
1178static void smc_timeout(struct net_device *dev)
1179{
1180 /* If we get here, some higher level has decided we are broken.
1181 There should really be a "kick me" function call instead. */
1182 printk(KERN_WARNING CARDNAME": transmit timed out, %s?\n",
1183 tx_done(dev) ? "IRQ conflict" :
1184 "network cable problem");
1185 /* "kick" the adaptor */
1186 smc_reset( dev->base_addr );
1187 smc_enable( dev->base_addr );
1188 dev->trans_start = jiffies;
1189 /* clear anything saved */
1190 ((struct smc_local *)dev->priv)->saved_skb = NULL;
1191 netif_wake_queue(dev);
1192}
1193
1194/*-------------------------------------------------------------
1195 .
1196 . smc_rcv - receive a packet from the card
1197 .
1198 . There is ( at least ) a packet waiting to be read from
1199 . chip-memory.
1200 .
1201 . o Read the status
1202 . o If an error, record it
1203 . o otherwise, read in the packet
1204 --------------------------------------------------------------
1205*/
1206static void smc_rcv(struct net_device *dev)
1207{
1208 struct smc_local *lp = netdev_priv(dev);
1209 int ioaddr = dev->base_addr;
1210 int packet_number;
1211 word status;
1212 word packet_length;
1213
1214 /* assume bank 2 */
1215
1216 packet_number = inw( ioaddr + FIFO_PORTS );
1217
1218 if ( packet_number & FP_RXEMPTY ) {
1219 /* we got called , but nothing was on the FIFO */
1220 PRINTK((CARDNAME ": WARNING: smc_rcv with nothing on FIFO. \n"));
1221 /* don't need to restore anything */
1222 return;
1223 }
1224
1225 /* start reading from the start of the packet */
1226 outw( PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER );
1227
1228 /* First two words are status and packet_length */
1229 status = inw( ioaddr + DATA_1 );
1230 packet_length = inw( ioaddr + DATA_1 );
1231
1232 packet_length &= 0x07ff; /* mask off top bits */
1233
1234 PRINTK2(("RCV: STATUS %4x LENGTH %4x\n", status, packet_length ));
1235 /*
1236 . the packet length contains 3 extra words :
1237 . status, length, and an extra word with an odd byte .
1238 */
1239 packet_length -= 6;
1240
1241 if ( !(status & RS_ERRORS ) ){
1242 /* do stuff to make a new packet */
1243 struct sk_buff * skb;
1244 byte * data;
1245
1246 /* read one extra byte */
1247 if ( status & RS_ODDFRAME )
1248 packet_length++;
1249
1250 /* set multicast stats */
1251 if ( status & RS_MULTICAST )
1252 lp->stats.multicast++;
1253
1254 skb = dev_alloc_skb( packet_length + 5);
1255
1256 if ( skb == NULL ) {
1257 printk(KERN_NOTICE CARDNAME ": Low memory, packet dropped.\n");
1258 lp->stats.rx_dropped++;
1259 goto done;
1260 }
1261
1262 /*
1263 ! This should work without alignment, but it could be
1264 ! in the worse case
1265 */
1266
1267 skb_reserve( skb, 2 ); /* 16 bit alignment */
1268
1269 skb->dev = dev;
1270 data = skb_put( skb, packet_length);
1271
1272#ifdef USE_32_BIT
1273 /* QUESTION: Like in the TX routine, do I want
1274 to send the DWORDs or the bytes first, or some
1275 mixture. A mixture might improve already slow PIO
1276 performance */
1277 PRINTK3((" Reading %d dwords (and %d bytes) \n",
1278 packet_length >> 2, packet_length & 3 ));
1279 insl(ioaddr + DATA_1 , data, packet_length >> 2 );
1280 /* read the left over bytes */
1281 insb( ioaddr + DATA_1, data + (packet_length & 0xFFFFFC),
1282 packet_length & 0x3 );
1283#else
1284 PRINTK3((" Reading %d words and %d byte(s) \n",
1285 (packet_length >> 1 ), packet_length & 1 ));
1286 insw(ioaddr + DATA_1 , data, packet_length >> 1);
1287 if ( packet_length & 1 ) {
1288 data += packet_length & ~1;
1289 *(data++) = inb( ioaddr + DATA_1 );
1290 }
1291#endif
1292#if SMC_DEBUG > 2
1293 print_packet( data, packet_length );
1294#endif
1295
1296 skb->protocol = eth_type_trans(skb, dev );
1297 netif_rx(skb);
1298 dev->last_rx = jiffies;
1299 lp->stats.rx_packets++;
1300 lp->stats.rx_bytes += packet_length;
1301 } else {
1302 /* error ... */
1303 lp->stats.rx_errors++;
1304
1305 if ( status & RS_ALGNERR ) lp->stats.rx_frame_errors++;
1306 if ( status & (RS_TOOSHORT | RS_TOOLONG ) )
1307 lp->stats.rx_length_errors++;
1308 if ( status & RS_BADCRC) lp->stats.rx_crc_errors++;
1309 }
1310
1311done:
1312 /* error or good, tell the card to get rid of this packet */
1313 outw( MC_RELEASE, ioaddr + MMU_CMD );
1314}
1315
1316
1317/*************************************************************************
1318 . smc_tx
1319 .
1320 . Purpose: Handle a transmit error message. This will only be called
1321 . when an error, because of the AUTO_RELEASE mode.
1322 .
1323 . Algorithm:
1324 . Save pointer and packet no
1325 . Get the packet no from the top of the queue
1326 . check if it's valid ( if not, is this an error??? )
1327 . read the status word
1328 . record the error
1329 . ( resend? Not really, since we don't want old packets around )
1330 . Restore saved values
1331 ************************************************************************/
1332static void smc_tx( struct net_device * dev )
1333{
1334 int ioaddr = dev->base_addr;
1335 struct smc_local *lp = netdev_priv(dev);
1336 byte saved_packet;
1337 byte packet_no;
1338 word tx_status;
1339
1340
1341 /* assume bank 2 */
1342
1343 saved_packet = inb( ioaddr + PNR_ARR );
1344 packet_no = inw( ioaddr + FIFO_PORTS );
1345 packet_no &= 0x7F;
1346
1347 /* select this as the packet to read from */
1348 outb( packet_no, ioaddr + PNR_ARR );
1349
1350 /* read the first word from this packet */
1351 outw( PTR_AUTOINC | PTR_READ, ioaddr + POINTER );
1352
1353 tx_status = inw( ioaddr + DATA_1 );
1354 PRINTK3((CARDNAME": TX DONE STATUS: %4x \n", tx_status ));
1355
1356 lp->stats.tx_errors++;
1357 if ( tx_status & TS_LOSTCAR ) lp->stats.tx_carrier_errors++;
1358 if ( tx_status & TS_LATCOL ) {
1359 printk(KERN_DEBUG CARDNAME
1360 ": Late collision occurred on last xmit.\n");
1361 lp->stats.tx_window_errors++;
1362 }
1363#if 0
1364 if ( tx_status & TS_16COL ) { ... }
1365#endif
1366
1367 if ( tx_status & TS_SUCCESS ) {
1368 printk(CARDNAME": Successful packet caused interrupt \n");
1369 }
1370 /* re-enable transmit */
1371 SMC_SELECT_BANK( 0 );
1372 outw( inw( ioaddr + TCR ) | TCR_ENABLE, ioaddr + TCR );
1373
1374 /* kill the packet */
1375 SMC_SELECT_BANK( 2 );
1376 outw( MC_FREEPKT, ioaddr + MMU_CMD );
1377
1378 /* one less packet waiting for me */
1379 lp->packets_waiting--;
1380
1381 outb( saved_packet, ioaddr + PNR_ARR );
1382 return;
1383}
1384
1385/*--------------------------------------------------------------------
1386 .
1387 . This is the main routine of the driver, to handle the device when
1388 . it needs some attention.
1389 .
1390 . So:
1391 . first, save state of the chipset
1392 . branch off into routines to handle each case, and acknowledge
1393 . each to the interrupt register
1394 . and finally restore state.
1395 .
1396 ---------------------------------------------------------------------*/
1397
1398static irqreturn_t smc_interrupt(int irq, void * dev_id, struct pt_regs * regs)
1399{
1400 struct net_device *dev = dev_id;
1401 int ioaddr = dev->base_addr;
1402 struct smc_local *lp = netdev_priv(dev);
1403
1404 byte status;
1405 word card_stats;
1406 byte mask;
1407 int timeout;
1408 /* state registers */
1409 word saved_bank;
1410 word saved_pointer;
1411 int handled = 0;
1412
1413
1414 PRINTK3((CARDNAME": SMC interrupt started \n"));
1415
1416 saved_bank = inw( ioaddr + BANK_SELECT );
1417
1418 SMC_SELECT_BANK(2);
1419 saved_pointer = inw( ioaddr + POINTER );
1420
1421 mask = inb( ioaddr + INT_MASK );
1422 /* clear all interrupts */
1423 outb( 0, ioaddr + INT_MASK );
1424
1425
1426 /* set a timeout value, so I don't stay here forever */
1427 timeout = 4;
1428
1429 PRINTK2((KERN_WARNING CARDNAME ": MASK IS %x \n", mask ));
1430 do {
1431 /* read the status flag, and mask it */
1432 status = inb( ioaddr + INTERRUPT ) & mask;
1433 if (!status )
1434 break;
1435
1436 handled = 1;
1437
1438 PRINTK3((KERN_WARNING CARDNAME
1439 ": Handling interrupt status %x \n", status ));
1440
1441 if (status & IM_RCV_INT) {
1442 /* Got a packet(s). */
1443 PRINTK2((KERN_WARNING CARDNAME
1444 ": Receive Interrupt\n"));
1445 smc_rcv(dev);
1446 } else if (status & IM_TX_INT ) {
1447 PRINTK2((KERN_WARNING CARDNAME
1448 ": TX ERROR handled\n"));
1449 smc_tx(dev);
1450 outb(IM_TX_INT, ioaddr + INTERRUPT );
1451 } else if (status & IM_TX_EMPTY_INT ) {
1452 /* update stats */
1453 SMC_SELECT_BANK( 0 );
1454 card_stats = inw( ioaddr + COUNTER );
1455 /* single collisions */
1456 lp->stats.collisions += card_stats & 0xF;
1457 card_stats >>= 4;
1458 /* multiple collisions */
1459 lp->stats.collisions += card_stats & 0xF;
1460
1461 /* these are for when linux supports these statistics */
1462
1463 SMC_SELECT_BANK( 2 );
1464 PRINTK2((KERN_WARNING CARDNAME
1465 ": TX_BUFFER_EMPTY handled\n"));
1466 outb( IM_TX_EMPTY_INT, ioaddr + INTERRUPT );
1467 mask &= ~IM_TX_EMPTY_INT;
1468 lp->stats.tx_packets += lp->packets_waiting;
1469 lp->packets_waiting = 0;
1470
1471 } else if (status & IM_ALLOC_INT ) {
1472 PRINTK2((KERN_DEBUG CARDNAME
1473 ": Allocation interrupt \n"));
1474 /* clear this interrupt so it doesn't happen again */
1475 mask &= ~IM_ALLOC_INT;
1476
1477 smc_hardware_send_packet( dev );
1478
1479 /* enable xmit interrupts based on this */
1480 mask |= ( IM_TX_EMPTY_INT | IM_TX_INT );
1481
1482 /* and let the card send more packets to me */
1483 netif_wake_queue(dev);
1484
1485 PRINTK2((CARDNAME": Handoff done successfully.\n"));
1486 } else if (status & IM_RX_OVRN_INT ) {
1487 lp->stats.rx_errors++;
1488 lp->stats.rx_fifo_errors++;
1489 outb( IM_RX_OVRN_INT, ioaddr + INTERRUPT );
1490 } else if (status & IM_EPH_INT ) {
1491 PRINTK((CARDNAME ": UNSUPPORTED: EPH INTERRUPT \n"));
1492 } else if (status & IM_ERCV_INT ) {
1493 PRINTK((CARDNAME ": UNSUPPORTED: ERCV INTERRUPT \n"));
1494 outb( IM_ERCV_INT, ioaddr + INTERRUPT );
1495 }
1496 } while ( timeout -- );
1497
1498
1499 /* restore state register */
1500 SMC_SELECT_BANK( 2 );
1501 outb( mask, ioaddr + INT_MASK );
1502
1503 PRINTK3(( KERN_WARNING CARDNAME ": MASK is now %x \n", mask ));
1504 outw( saved_pointer, ioaddr + POINTER );
1505
1506 SMC_SELECT_BANK( saved_bank );
1507
1508 PRINTK3((CARDNAME ": Interrupt done\n"));
1509 return IRQ_RETVAL(handled);
1510}
1511
1512
1513/*----------------------------------------------------
1514 . smc_close
1515 .
1516 . this makes the board clean up everything that it can
1517 . and not talk to the outside world. Caused by
1518 . an 'ifconfig ethX down'
1519 .
1520 -----------------------------------------------------*/
1521static int smc_close(struct net_device *dev)
1522{
1523 netif_stop_queue(dev);
1524 /* clear everything */
1525 smc_shutdown( dev->base_addr );
1526
1527 /* Update the statistics here. */
1528 return 0;
1529}
1530
1531/*------------------------------------------------------------
1532 . Get the current statistics.
1533 . This may be called with the card open or closed.
1534 .-------------------------------------------------------------*/
1535static struct net_device_stats* smc_query_statistics(struct net_device *dev) {
1536 struct smc_local *lp = netdev_priv(dev);
1537
1538 return &lp->stats;
1539}
1540
1541/*-----------------------------------------------------------
1542 . smc_set_multicast_list
1543 .
1544 . This routine will, depending on the values passed to it,
1545 . either make it accept multicast packets, go into
1546 . promiscuous mode ( for TCPDUMP and cousins ) or accept
1547 . a select set of multicast packets
1548*/
1549static void smc_set_multicast_list(struct net_device *dev)
1550{
1551 short ioaddr = dev->base_addr;
1552
1553 SMC_SELECT_BANK(0);
1554 if ( dev->flags & IFF_PROMISC )
1555 outw( inw(ioaddr + RCR ) | RCR_PROMISC, ioaddr + RCR );
1556
1557/* BUG? I never disable promiscuous mode if multicasting was turned on.
1558 Now, I turn off promiscuous mode, but I don't do anything to multicasting
1559 when promiscuous mode is turned on.
1560*/
1561
1562 /* Here, I am setting this to accept all multicast packets.
1563 I don't need to zero the multicast table, because the flag is
1564 checked before the table is
1565 */
1566 else if (dev->flags & IFF_ALLMULTI)
1567 outw( inw(ioaddr + RCR ) | RCR_ALMUL, ioaddr + RCR );
1568
1569 /* We just get all multicast packets even if we only want them
1570 . from one source. This will be changed at some future
1571 . point. */
1572 else if (dev->mc_count ) {
1573 /* support hardware multicasting */
1574
1575 /* be sure I get rid of flags I might have set */
1576 outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL),
1577 ioaddr + RCR );
1578 /* NOTE: this has to set the bank, so make sure it is the
1579 last thing called. The bank is set to zero at the top */
1580 smc_setmulticast( ioaddr, dev->mc_count, dev->mc_list );
1581 }
1582 else {
1583 outw( inw( ioaddr + RCR ) & ~(RCR_PROMISC | RCR_ALMUL),
1584 ioaddr + RCR );
1585
1586 /*
1587 since I'm disabling all multicast entirely, I need to
1588 clear the multicast list
1589 */
1590 SMC_SELECT_BANK( 3 );
1591 outw( 0, ioaddr + MULTICAST1 );
1592 outw( 0, ioaddr + MULTICAST2 );
1593 outw( 0, ioaddr + MULTICAST3 );
1594 outw( 0, ioaddr + MULTICAST4 );
1595 }
1596}
1597
1598#ifdef MODULE
1599
1600static struct net_device *devSMC9194;
1601MODULE_LICENSE("GPL");
1602
1603module_param(io, int, 0);
1604module_param(irq, int, 0);
1605module_param(ifport, int, 0);
1606MODULE_PARM_DESC(io, "SMC 99194 I/O base address");
1607MODULE_PARM_DESC(irq, "SMC 99194 IRQ number");
1608MODULE_PARM_DESC(ifport, "SMC 99194 interface port (0-default, 1-TP, 2-AUI)");
1609
1610int init_module(void)
1611{
1612 if (io == 0)
1613 printk(KERN_WARNING
1614 CARDNAME": You shouldn't use auto-probing with insmod!\n" );
1615
1616 /* copy the parameters from insmod into the device structure */
1617 devSMC9194 = smc_init(-1);
1618 if (IS_ERR(devSMC9194))
1619 return PTR_ERR(devSMC9194);
1620 return 0;
1621}
1622
1623void cleanup_module(void)
1624{
1625 unregister_netdev(devSMC9194);
1626 free_irq(devSMC9194->irq, devSMC9194);
1627 release_region(devSMC9194->base_addr, SMC_IO_EXTENT);
1628 free_netdev(devSMC9194);
1629}
1630
1631#endif /* MODULE */