blob: de0d32f6618de2bf0d78b36a13be128e52761d2d [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* Driver for Microtek Scanmaker X6 USB scanner, and possibly others.
2 *
3 * (C) Copyright 2000 John Fremlin <vii@penguinpowered.com>
4 * (C) Copyright 2000 Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de>
5 *
6 * Parts shamelessly stolen from usb-storage and copyright by their
7 * authors. Thanks to Matt Dharm for giving us permission!
8 *
9 * This driver implements a SCSI host controller driver and a USB
10 * device driver. To avoid confusion, all the USB related stuff is
11 * prefixed by mts_usb_ and all the SCSI stuff by mts_scsi_.
12 *
13 * Microtek (www.microtek.com) did not release the specifications for
14 * their USB protocol to us, so we had to reverse engineer them. We
15 * don't know for which models they are valid.
16 *
17 * The X6 USB has three bulk endpoints, one output (0x1) down which
18 * commands and outgoing data are sent, and two input: 0x82 from which
19 * normal data is read from the scanner (in packets of maximum 32
20 * bytes) and from which the status byte is read, and 0x83 from which
21 * the results of a scan (or preview) are read in up to 64 * 1024 byte
22 * chunks by the Windows driver. We don't know how much it is possible
23 * to read at a time from 0x83.
24 *
25 * It seems possible to read (with URB transfers) everything from 0x82
26 * in one go, without bothering to read in 32 byte chunks.
27 *
28 * There seems to be an optimisation of a further READ implicit if
29 * you simply read from 0x83.
30 *
31 * Guessed protocol:
32 *
33 * Send raw SCSI command to EP 0x1
34 *
35 * If there is data to receive:
36 * If the command was READ datatype=image:
37 * Read a lot of data from EP 0x83
38 * Else:
39 * Read data from EP 0x82
40 * Else:
41 * If there is data to transmit:
42 * Write it to EP 0x1
43 *
44 * Read status byte from EP 0x82
45 *
46 * References:
47 *
48 * The SCSI command set for the scanner is available from
49 * ftp://ftp.microtek.com/microtek/devpack/
50 *
51 * Microtek NV sent us a more up to date version of the document. If
52 * you want it, just send mail.
53 *
54 * Status:
55 *
56 * Untested with multiple scanners.
57 * Untested on SMP.
58 * Untested on a bigendian machine.
59 *
60 * History:
61 *
62 * 20000417 starting history
63 * 20000417 fixed load oops
64 * 20000417 fixed unload oops
65 * 20000419 fixed READ IMAGE detection
66 * 20000424 started conversion to use URBs
67 * 20000502 handled short transfers as errors
68 * 20000513 rename and organisation of functions (john)
69 * 20000513 added IDs for all products supported by Windows driver (john)
70 * 20000514 Rewrote mts_scsi_queuecommand to use URBs (john)
71 * 20000514 Version 0.0.8j
72 * 20000514 Fix reporting of non-existant devices to SCSI layer (john)
73 * 20000514 Added MTS_DEBUG_INT (john)
74 * 20000514 Changed "usb-microtek" to "microtek" for consistency (john)
75 * 20000514 Stupid bug fixes (john)
76 * 20000514 Version 0.0.9j
77 * 20000515 Put transfer context and URB in mts_desc (john)
78 * 20000515 Added prelim turn off debugging support (john)
79 * 20000515 Version 0.0.10j
80 * 20000515 Fixed up URB allocation (clear URB on alloc) (john)
81 * 20000515 Version 0.0.11j
82 * 20000516 Removed unnecessary spinlock in mts_transfer_context (john)
83 * 20000516 Removed unnecessary up on instance lock in mts_remove_nolock (john)
84 * 20000516 Implemented (badly) scsi_abort (john)
85 * 20000516 Version 0.0.12j
86 * 20000517 Hopefully removed mts_remove_nolock quasideadlock (john)
87 * 20000517 Added mts_debug_dump to print ll USB info (john)
88 * 20000518 Tweaks and documentation updates (john)
89 * 20000518 Version 0.0.13j
90 * 20000518 Cleaned up abort handling (john)
91 * 20000523 Removed scsi_command and various scsi_..._resets (john)
92 * 20000523 Added unlink URB on scsi_abort, now OHCI supports it (john)
93 * 20000523 Fixed last tiresome compile warning (john)
94 * 20000523 Version 0.0.14j (though version 0.1 has come out?)
95 * 20000602 Added primitive reset
96 * 20000602 Version 0.2.0
97 * 20000603 various cosmetic changes
98 * 20000603 Version 0.2.1
99 * 20000620 minor cosmetic changes
100 * 20000620 Version 0.2.2
101 * 20000822 Hopefully fixed deadlock in mts_remove_nolock()
102 * 20000822 Fixed minor race in mts_transfer_cleanup()
103 * 20000822 Fixed deadlock on submission error in queuecommand
104 * 20000822 Version 0.2.3
105 * 20000913 Reduced module size if debugging is off
106 * 20000913 Version 0.2.4
107 * 20010210 New abort logic
108 * 20010210 Version 0.3.0
109 * 20010217 Merged scatter/gather
110 * 20010218 Version 0.4.0
111 * 20010218 Cosmetic fixes
112 * 20010218 Version 0.4.1
113 * 20010306 Abort while using scatter/gather
114 * 20010306 Version 0.4.2
115 * 20010311 Remove all timeouts and tidy up generally (john)
116 * 20010320 check return value of scsi_register()
117 * 20010320 Version 0.4.3
118 * 20010408 Identify version on module load.
119 * 20011003 Fix multiple requests
120 */
121
122#include <linux/module.h>
123#include <linux/kernel.h>
124#include <linux/sched.h>
125#include <linux/signal.h>
126#include <linux/errno.h>
127#include <linux/random.h>
128#include <linux/poll.h>
129#include <linux/init.h>
130#include <linux/slab.h>
131#include <linux/spinlock.h>
132#include <linux/smp_lock.h>
133#include <linux/usb.h>
134#include <linux/proc_fs.h>
135
136#include <asm/atomic.h>
137#include <linux/blkdev.h>
138#include "../../scsi/scsi.h"
139#include <scsi/scsi_host.h>
140
141#include "microtek.h"
142
143/*
144 * Version Information
145 */
146#define DRIVER_VERSION "v0.4.3"
147#define DRIVER_AUTHOR "John Fremlin <vii@penguinpowered.com>, Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de>"
148#define DRIVER_DESC "Microtek Scanmaker X6 USB scanner driver"
149
150/* Should we do debugging? */
151
152//#define MTS_DO_DEBUG
153
154/* USB layer driver interface */
155
156static int mts_usb_probe(struct usb_interface *intf,
157 const struct usb_device_id *id);
158static void mts_usb_disconnect(struct usb_interface *intf);
159
160static struct usb_device_id mts_usb_ids [];
161
162static struct usb_driver mts_usb_driver = {
163 .owner = THIS_MODULE,
164 .name = "microtekX6",
165 .probe = mts_usb_probe,
166 .disconnect = mts_usb_disconnect,
167 .id_table = mts_usb_ids,
168};
169
170
171/* Internal driver stuff */
172
173#define MTS_VERSION "0.4.3"
174#define MTS_NAME "microtek usb (rev " MTS_VERSION "): "
175
176#define MTS_WARNING(x...) \
177 printk( KERN_WARNING MTS_NAME x )
178#define MTS_ERROR(x...) \
179 printk( KERN_ERR MTS_NAME x )
180#define MTS_INT_ERROR(x...) \
181 MTS_ERROR(x)
182#define MTS_MESSAGE(x...) \
183 printk( KERN_INFO MTS_NAME x )
184
185#if defined MTS_DO_DEBUG
186
187#define MTS_DEBUG(x...) \
188 printk( KERN_DEBUG MTS_NAME x )
189
190#define MTS_DEBUG_GOT_HERE() \
191 MTS_DEBUG("got to %s:%d (%s)\n", __FILE__, (int)__LINE__, __PRETTY_FUNCTION__ )
192#define MTS_DEBUG_INT() \
193 do { MTS_DEBUG_GOT_HERE(); \
194 MTS_DEBUG("transfer = 0x%x context = 0x%x\n",(int)transfer,(int)context ); \
195 MTS_DEBUG("status = 0x%x data-length = 0x%x sent = 0x%x\n",(int)transfer->status,(int)context->data_length, (int)transfer->actual_length ); \
196 mts_debug_dump(context->instance);\
197 } while(0)
198#else
199
200#define MTS_NUL_STATEMENT do { } while(0)
201
202#define MTS_DEBUG(x...) MTS_NUL_STATEMENT
203#define MTS_DEBUG_GOT_HERE() MTS_NUL_STATEMENT
204#define MTS_DEBUG_INT() MTS_NUL_STATEMENT
205
206#endif
207
208
209
210#define MTS_INT_INIT()\
211 struct mts_transfer_context* context = (struct mts_transfer_context*)transfer->context; \
212 MTS_DEBUG_INT();\
213
214#ifdef MTS_DO_DEBUG
215
216static inline void mts_debug_dump(struct mts_desc* desc) {
217 MTS_DEBUG("desc at 0x%x: toggle = %02x%02x\n",
218 (int)desc,
219 (int)desc->usb_dev->toggle[1],(int)desc->usb_dev->toggle[0]
220 );
221 MTS_DEBUG("ep_out=%x ep_response=%x ep_image=%x\n",
222 usb_sndbulkpipe(desc->usb_dev,desc->ep_out),
223 usb_rcvbulkpipe(desc->usb_dev,desc->ep_response),
224 usb_rcvbulkpipe(desc->usb_dev,desc->ep_image)
225 );
226}
227
228
229static inline void mts_show_command(Scsi_Cmnd *srb)
230{
231 char *what = NULL;
232
233 switch (srb->cmnd[0]) {
234 case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break;
235 case REZERO_UNIT: what = "REZERO_UNIT"; break;
236 case REQUEST_SENSE: what = "REQUEST_SENSE"; break;
237 case FORMAT_UNIT: what = "FORMAT_UNIT"; break;
238 case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break;
239 case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break;
240 case READ_6: what = "READ_6"; break;
241 case WRITE_6: what = "WRITE_6"; break;
242 case SEEK_6: what = "SEEK_6"; break;
243 case READ_REVERSE: what = "READ_REVERSE"; break;
244 case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break;
245 case SPACE: what = "SPACE"; break;
246 case INQUIRY: what = "INQUIRY"; break;
247 case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break;
248 case MODE_SELECT: what = "MODE_SELECT"; break;
249 case RESERVE: what = "RESERVE"; break;
250 case RELEASE: what = "RELEASE"; break;
251 case COPY: what = "COPY"; break;
252 case ERASE: what = "ERASE"; break;
253 case MODE_SENSE: what = "MODE_SENSE"; break;
254 case START_STOP: what = "START_STOP"; break;
255 case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break;
256 case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break;
257 case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break;
258 case SET_WINDOW: what = "SET_WINDOW"; break;
259 case READ_CAPACITY: what = "READ_CAPACITY"; break;
260 case READ_10: what = "READ_10"; break;
261 case WRITE_10: what = "WRITE_10"; break;
262 case SEEK_10: what = "SEEK_10"; break;
263 case WRITE_VERIFY: what = "WRITE_VERIFY"; break;
264 case VERIFY: what = "VERIFY"; break;
265 case SEARCH_HIGH: what = "SEARCH_HIGH"; break;
266 case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break;
267 case SEARCH_LOW: what = "SEARCH_LOW"; break;
268 case SET_LIMITS: what = "SET_LIMITS"; break;
269 case READ_POSITION: what = "READ_POSITION"; break;
270 case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break;
271 case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break;
272 case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break;
273 case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break;
274 case COMPARE: what = "COMPARE"; break;
275 case COPY_VERIFY: what = "COPY_VERIFY"; break;
276 case WRITE_BUFFER: what = "WRITE_BUFFER"; break;
277 case READ_BUFFER: what = "READ_BUFFER"; break;
278 case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break;
279 case READ_LONG: what = "READ_LONG"; break;
280 case WRITE_LONG: what = "WRITE_LONG"; break;
281 case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break;
282 case WRITE_SAME: what = "WRITE_SAME"; break;
283 case READ_TOC: what = "READ_TOC"; break;
284 case LOG_SELECT: what = "LOG_SELECT"; break;
285 case LOG_SENSE: what = "LOG_SENSE"; break;
286 case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
287 case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
288 case MOVE_MEDIUM: what = "MOVE_MEDIUM"; break;
289 case READ_12: what = "READ_12"; break;
290 case WRITE_12: what = "WRITE_12"; break;
291 case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
292 case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
293 case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
294 case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
295 case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
296 case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
297 case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
298 default:
299 MTS_DEBUG("can't decode command\n");
300 goto out;
301 break;
302 }
303 MTS_DEBUG( "Command %s (%d bytes)\n", what, srb->cmd_len);
304
305 out:
306 MTS_DEBUG( " %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n",
307 srb->cmnd[0], srb->cmnd[1], srb->cmnd[2], srb->cmnd[3], srb->cmnd[4], srb->cmnd[5],
308 srb->cmnd[6], srb->cmnd[7], srb->cmnd[8], srb->cmnd[9]);
309}
310
311#else
312
313static inline void mts_show_command(Scsi_Cmnd * dummy)
314{
315}
316
317static inline void mts_debug_dump(struct mts_desc* dummy)
318{
319}
320
321#endif
322
323static inline void mts_urb_abort(struct mts_desc* desc) {
324 MTS_DEBUG_GOT_HERE();
325 mts_debug_dump(desc);
326
327 usb_kill_urb( desc->urb );
328}
329
330static int mts_scsi_abort (Scsi_Cmnd *srb)
331{
332 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
333
334 MTS_DEBUG_GOT_HERE();
335
336 mts_urb_abort(desc);
337
338 return SCSI_ABORT_PENDING;
339}
340
341static int mts_scsi_host_reset (Scsi_Cmnd *srb)
342{
343 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
344 int result, rc;
345
346 MTS_DEBUG_GOT_HERE();
347 mts_debug_dump(desc);
348
349 rc = usb_lock_device_for_reset(desc->usb_dev, desc->usb_intf);
350 if (rc < 0)
351 return FAILED;
352 result = usb_reset_device(desc->usb_dev);;
353 if (rc)
354 usb_unlock_device(desc->usb_dev);
355 return result ? FAILED : SUCCESS;
356}
357
358static
359int mts_scsi_queuecommand (Scsi_Cmnd *srb, mts_scsi_cmnd_callback callback );
360
361static void mts_transfer_cleanup( struct urb *transfer );
362static void mts_do_sg(struct urb * transfer, struct pt_regs *regs);
363
364
365inline static
366void mts_int_submit_urb (struct urb* transfer,
367 int pipe,
368 void* data,
369 unsigned length,
370 usb_complete_t callback )
371/* Interrupt context! */
372
373/* Holding transfer->context->lock! */
374{
375 int res;
376
377 MTS_INT_INIT();
378
379 usb_fill_bulk_urb(transfer,
380 context->instance->usb_dev,
381 pipe,
382 data,
383 length,
384 callback,
385 context
386 );
387
388 transfer->status = 0;
389
390 res = usb_submit_urb( transfer, GFP_ATOMIC );
391 if ( unlikely(res) ) {
392 MTS_INT_ERROR( "could not submit URB! Error was %d\n",(int)res );
393 context->srb->result = DID_ERROR << 16;
394 mts_transfer_cleanup(transfer);
395 }
396 return;
397}
398
399
400static void mts_transfer_cleanup( struct urb *transfer )
401/* Interrupt context! */
402{
403 MTS_INT_INIT();
404
405 if ( likely(context->final_callback != NULL) )
406 context->final_callback(context->srb);
407
408}
409
410static void mts_transfer_done( struct urb *transfer, struct pt_regs *regs )
411{
412 MTS_INT_INIT();
413
414 context->srb->result &= MTS_SCSI_ERR_MASK;
415 context->srb->result |= (unsigned)context->status<<1;
416
417 mts_transfer_cleanup(transfer);
418
419 return;
420}
421
422
423static void mts_get_status( struct urb *transfer )
424/* Interrupt context! */
425{
426 MTS_INT_INIT();
427
428 mts_int_submit_urb(transfer,
429 usb_rcvbulkpipe(context->instance->usb_dev,
430 context->instance->ep_response),
431 &context->status,
432 1,
433 mts_transfer_done );
434}
435
436static void mts_data_done( struct urb* transfer, struct pt_regs *regs )
437/* Interrupt context! */
438{
439 MTS_INT_INIT();
440
441 if ( context->data_length != transfer->actual_length ) {
442 context->srb->resid = context->data_length - transfer->actual_length;
443 } else if ( unlikely(transfer->status) ) {
444 context->srb->result = (transfer->status == -ENOENT ? DID_ABORT : DID_ERROR)<<16;
445 }
446
447 mts_get_status(transfer);
448
449 return;
450}
451
452
453static void mts_command_done( struct urb *transfer, struct pt_regs *regs )
454/* Interrupt context! */
455{
456 MTS_INT_INIT();
457
458 if ( unlikely(transfer->status) ) {
459 if (transfer->status == -ENOENT) {
460 /* We are being killed */
461 MTS_DEBUG_GOT_HERE();
462 context->srb->result = DID_ABORT<<16;
463 } else {
464 /* A genuine error has occurred */
465 MTS_DEBUG_GOT_HERE();
466
467 context->srb->result = DID_ERROR<<16;
468 }
469 mts_transfer_cleanup(transfer);
470
471 return;
472 }
473
474 if (context->srb->cmnd[0] == REQUEST_SENSE) {
475 mts_int_submit_urb(transfer,
476 context->data_pipe,
477 context->srb->sense_buffer,
478 context->data_length,
479 mts_data_done);
480 } else { if ( context->data ) {
481 mts_int_submit_urb(transfer,
482 context->data_pipe,
483 context->data,
484 context->data_length,
485 context->srb->use_sg ? mts_do_sg : mts_data_done);
486 } else {
487 mts_get_status(transfer);
488 }
489 }
490
491 return;
492}
493
494static void mts_do_sg (struct urb* transfer, struct pt_regs *regs)
495{
496 struct scatterlist * sg;
497 MTS_INT_INIT();
498
499 MTS_DEBUG("Processing fragment %d of %d\n", context->fragment,context->srb->use_sg);
500
501 if (unlikely(transfer->status)) {
502 context->srb->result = (transfer->status == -ENOENT ? DID_ABORT : DID_ERROR)<<16;
503 mts_transfer_cleanup(transfer);
504 }
505
506 sg = context->srb->buffer;
507 context->fragment++;
508 mts_int_submit_urb(transfer,
509 context->data_pipe,
510 page_address(sg[context->fragment].page) +
511 sg[context->fragment].offset,
512 sg[context->fragment].length,
513 context->fragment + 1 == context->srb->use_sg ? mts_data_done : mts_do_sg);
514 return;
515}
516
517static const u8 mts_read_image_sig[] = { 0x28, 00, 00, 00 };
518static const u8 mts_read_image_sig_len = 4;
519static const unsigned char mts_direction[256/8] = {
520 0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
521 0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
522 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
523 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
524};
525
526
527#define MTS_DIRECTION_IS_IN(x) ((mts_direction[x>>3] >> (x & 7)) & 1)
528
529static void
530mts_build_transfer_context( Scsi_Cmnd *srb, struct mts_desc* desc )
531{
532 int pipe;
533 struct scatterlist * sg;
534
535 MTS_DEBUG_GOT_HERE();
536
537 desc->context.instance = desc;
538 desc->context.srb = srb;
539 desc->context.fragment = 0;
540
541 if (!srb->use_sg) {
542 if ( !srb->bufflen ){
543 desc->context.data = NULL;
544 desc->context.data_length = 0;
545 return;
546 } else {
547 desc->context.data = srb->buffer;
548 desc->context.data_length = srb->bufflen;
549 MTS_DEBUG("length = %d or %d\n",
550 srb->request_bufflen, srb->bufflen);
551 }
552 } else {
553 MTS_DEBUG("Using scatter/gather\n");
554 sg = srb->buffer;
555 desc->context.data = page_address(sg[0].page) + sg[0].offset;
556 desc->context.data_length = sg[0].length;
557 }
558
559
560 /* can't rely on srb->sc_data_direction */
561
562 /* Brutally ripped from usb-storage */
563
564 if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len )
565) { pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image);
566 MTS_DEBUG( "transfering from desc->ep_image == %d\n",
567 (int)desc->ep_image );
568 } else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) {
569 pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response);
570 MTS_DEBUG( "transfering from desc->ep_response == %d\n",
571 (int)desc->ep_response);
572 } else {
573 MTS_DEBUG("transfering to desc->ep_out == %d\n",
574 (int)desc->ep_out);
575 pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out);
576 }
577 desc->context.data_pipe = pipe;
578}
579
580
581static
582int mts_scsi_queuecommand( Scsi_Cmnd *srb, mts_scsi_cmnd_callback callback )
583{
584 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
585 int err = 0;
586 int res;
587
588 MTS_DEBUG_GOT_HERE();
589 mts_show_command(srb);
590 mts_debug_dump(desc);
591
592 if ( srb->device->lun || srb->device->id || srb->device->channel ) {
593
594 MTS_DEBUG("Command to LUN=%d ID=%d CHANNEL=%d from SCSI layer\n",(int)srb->device->lun,(int)srb->device->id, (int)srb->device->channel );
595
596 MTS_DEBUG("this device doesn't exist\n");
597
598 srb->result = DID_BAD_TARGET << 16;
599
600 if(likely(callback != NULL))
601 callback(srb);
602
603 goto out;
604 }
605
606
607 usb_fill_bulk_urb(desc->urb,
608 desc->usb_dev,
609 usb_sndbulkpipe(desc->usb_dev,desc->ep_out),
610 srb->cmnd,
611 srb->cmd_len,
612 mts_command_done,
613 &desc->context
614 );
615
616
617 mts_build_transfer_context( srb, desc );
618 desc->context.final_callback = callback;
619
620 /* here we need ATOMIC as we are called with the iolock */
621 res=usb_submit_urb(desc->urb, GFP_ATOMIC);
622
623 if(unlikely(res)){
624 MTS_ERROR("error %d submitting URB\n",(int)res);
625 srb->result = DID_ERROR << 16;
626
627 if(likely(callback != NULL))
628 callback(srb);
629
630 }
631
632out:
633 return err;
634}
635
636static Scsi_Host_Template mts_scsi_host_template = {
637 .module = THIS_MODULE,
638 .name = "microtekX6",
639 .proc_name = "microtekX6",
640 .queuecommand = mts_scsi_queuecommand,
641 .eh_abort_handler = mts_scsi_abort,
642 .eh_host_reset_handler = mts_scsi_host_reset,
643 .sg_tablesize = SG_ALL,
644 .can_queue = 1,
645 .this_id = -1,
646 .cmd_per_lun = 1,
647 .use_clustering = 1,
648 .emulated = 1,
649};
650
651struct vendor_product
652{
653 char* name;
654 enum
655 {
656 mts_sup_unknown=0,
657 mts_sup_alpha,
658 mts_sup_full
659 }
660 support_status;
661} ;
662
663
664/* These are taken from the msmUSB.inf file on the Windows driver CD */
665const static struct vendor_product mts_supported_products[] =
666{
667 { "Phantom 336CX", mts_sup_unknown},
668 { "Phantom 336CX", mts_sup_unknown},
669 { "Scanmaker X6", mts_sup_alpha},
670 { "Phantom C6", mts_sup_unknown},
671 { "Phantom 336CX", mts_sup_unknown},
672 { "ScanMaker V6USL", mts_sup_unknown},
673 { "ScanMaker V6USL", mts_sup_unknown},
674 { "Scanmaker V6UL", mts_sup_unknown},
675 { "Scanmaker V6UPL", mts_sup_alpha},
676};
677
678/* The entries of microtek_table must correspond, line-by-line to
679 the entries of mts_supported_products[]. */
680
681static struct usb_device_id mts_usb_ids [] =
682{
683 { USB_DEVICE(0x4ce, 0x0300) },
684 { USB_DEVICE(0x5da, 0x0094) },
685 { USB_DEVICE(0x5da, 0x0099) },
686 { USB_DEVICE(0x5da, 0x009a) },
687 { USB_DEVICE(0x5da, 0x00a0) },
688 { USB_DEVICE(0x5da, 0x00a3) },
689 { USB_DEVICE(0x5da, 0x80a3) },
690 { USB_DEVICE(0x5da, 0x80ac) },
691 { USB_DEVICE(0x5da, 0x00b6) },
692 { } /* Terminating entry */
693};
694
695MODULE_DEVICE_TABLE (usb, mts_usb_ids);
696
697
698static int mts_usb_probe(struct usb_interface *intf,
699 const struct usb_device_id *id)
700{
701 int i;
702 int ep_out = -1;
703 int ep_in_set[3]; /* this will break if we have more than three endpoints
704 which is why we check */
705 int *ep_in_current = ep_in_set;
706 int err_retval = -ENOMEM;
707
708 struct mts_desc * new_desc;
709 struct vendor_product const* p;
710 struct usb_device *dev = interface_to_usbdev (intf);
711
712 /* the current altsetting on the interface we're probing */
713 struct usb_host_interface *altsetting;
714
715 MTS_DEBUG_GOT_HERE();
716 MTS_DEBUG( "usb-device descriptor at %x\n", (int)dev );
717
718 MTS_DEBUG( "product id = 0x%x, vendor id = 0x%x\n",
719 le16_to_cpu(dev->descriptor.idProduct),
720 le16_to_cpu(dev->descriptor.idVendor) );
721
722 MTS_DEBUG_GOT_HERE();
723
724 p = &mts_supported_products[id - mts_usb_ids];
725
726 MTS_DEBUG_GOT_HERE();
727
728 MTS_DEBUG( "found model %s\n", p->name );
729 if ( p->support_status != mts_sup_full )
730 MTS_MESSAGE( "model %s is not known to be fully supported, reports welcome!\n",
731 p->name );
732
733 /* the current altsetting on the interface we're probing */
734 altsetting = intf->cur_altsetting;
735
736
737 /* Check if the config is sane */
738
739 if ( altsetting->desc.bNumEndpoints != MTS_EP_TOTAL ) {
740 MTS_WARNING( "expecting %d got %d endpoints! Bailing out.\n",
741 (int)MTS_EP_TOTAL, (int)altsetting->desc.bNumEndpoints );
742 return -ENODEV;
743 }
744
745 for( i = 0; i < altsetting->desc.bNumEndpoints; i++ ) {
746 if ((altsetting->endpoint[i].desc.bmAttributes &
747 USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) {
748
749 MTS_WARNING( "can only deal with bulk endpoints; endpoint %d is not bulk.\n",
750 (int)altsetting->endpoint[i].desc.bEndpointAddress );
751 } else {
752 if (altsetting->endpoint[i].desc.bEndpointAddress &
753 USB_DIR_IN)
754 *ep_in_current++
755 = altsetting->endpoint[i].desc.bEndpointAddress &
756 USB_ENDPOINT_NUMBER_MASK;
757 else {
758 if ( ep_out != -1 ) {
759 MTS_WARNING( "can only deal with one output endpoints. Bailing out." );
760 return -ENODEV;
761 }
762
763 ep_out = altsetting->endpoint[i].desc.bEndpointAddress &
764 USB_ENDPOINT_NUMBER_MASK;
765 }
766 }
767
768 }
769
770
771 if ( ep_out == -1 ) {
772 MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" );
773 return -ENODEV;
774 }
775
776
777 new_desc = kmalloc(sizeof(struct mts_desc), GFP_KERNEL);
778 if (!new_desc)
779 goto out;
780
781 memset(new_desc, 0, sizeof(*new_desc));
782 new_desc->urb = usb_alloc_urb(0, GFP_KERNEL);
783 if (!new_desc->urb)
784 goto out_kfree;
785
786 new_desc->usb_dev = dev;
787 new_desc->usb_intf = intf;
788 init_MUTEX(&new_desc->lock);
789
790 /* endpoints */
791 new_desc->ep_out = ep_out;
792 new_desc->ep_response = ep_in_set[0];
793 new_desc->ep_image = ep_in_set[1];
794
795 if ( new_desc->ep_out != MTS_EP_OUT )
796 MTS_WARNING( "will this work? Command EP is not usually %d\n",
797 (int)new_desc->ep_out );
798
799 if ( new_desc->ep_response != MTS_EP_RESPONSE )
800 MTS_WARNING( "will this work? Response EP is not usually %d\n",
801 (int)new_desc->ep_response );
802
803 if ( new_desc->ep_image != MTS_EP_IMAGE )
804 MTS_WARNING( "will this work? Image data EP is not usually %d\n",
805 (int)new_desc->ep_image );
806
807 new_desc->host = scsi_host_alloc(&mts_scsi_host_template,
808 sizeof(new_desc));
809 if (!new_desc->host)
810 goto out_free_urb;
811
812 new_desc->host->hostdata[0] = (unsigned long)new_desc;
813 if (scsi_add_host(new_desc->host, NULL)) {
814 err_retval = -EIO;
815 goto out_free_urb;
816 }
817 scsi_scan_host(new_desc->host);
818
819 usb_set_intfdata(intf, new_desc);
820 return 0;
821
822 out_free_urb:
823 usb_free_urb(new_desc->urb);
824 out_kfree:
825 kfree(new_desc);
826 out:
827 return err_retval;
828}
829
830static void mts_usb_disconnect (struct usb_interface *intf)
831{
832 struct mts_desc *desc = usb_get_intfdata(intf);
833
834 usb_set_intfdata(intf, NULL);
835
836 usb_kill_urb(desc->urb);
837 scsi_remove_host(desc->host);
838
839 scsi_host_put(desc->host);
840 usb_free_urb(desc->urb);
841 kfree(desc);
842}
843
844
845static int __init microtek_drv_init(void)
846{
847 return usb_register(&mts_usb_driver);
848}
849
850static void __exit microtek_drv_exit(void)
851{
852 usb_deregister(&mts_usb_driver);
853}
854
855module_init(microtek_drv_init);
856module_exit(microtek_drv_exit);
857
858MODULE_AUTHOR( DRIVER_AUTHOR );
859MODULE_DESCRIPTION( DRIVER_DESC );
860MODULE_LICENSE("GPL");
861
862