Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-4.9 / 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 / . / include / asm-ppc / ibm_ocp.h
blob: 8c61d93043affa876f5eff0ec500cd8cc0a0b7f7 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -0700[diff] [blame^]1/*
2 * ibm_ocp.h
3 *
4 * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
5 * Mipsys - France
6 *
7 * Derived from work (c) Armin Kuster akuster@pacbell.net
8 *
9 * Additional support and port to 2.6 LDM/sysfs by
10 * Matt Porter <mporter@kernel.crashing.org>
11 * Copyright 2003-2004 MontaVista Software, Inc.
12 *
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License as published by the
15 * Free Software Foundation; either version 2 of the License, or (at your
16 * option) any later version.
17 *
18 */
19#ifdef __KERNEL__
20#ifndef __IBM_OCP_H__
21#define __IBM_OCP_H__
22
23#include <asm/types.h>
24
25/*
26 * IBM 4xx OCP system information
27 */
28struct ocp_sys_info_data {
29 int opb_bus_freq; /* OPB Bus Frequency (Hz) */
30 int ebc_bus_freq; /* EBC Bus Frequency (Hz) */
31};
32
33extern struct ocp_sys_info_data ocp_sys_info;
34
35/*
36 * EMAC additional data and sysfs support
37 *
38 * Note about mdio_idx: When you have a zmii, it's usually
39 * not necessary, it covers the case of the 405EP which has
40 * the MDIO lines on EMAC0 only
41 *
42 * Note about phy_map: Per EMAC map of PHY ids which should
43 * be probed by emac_probe. Different EMACs can have
44 * overlapping maps.
45 *
46 * Note, this map uses inverse logic for bits:
47 * 0 - id should be probed
48 * 1 - id should be ignored
49 *
50 * Default value of 0x00000000 - will result in usual
51 * auto-detection logic.
52 *
53 */
54
55struct ocp_func_emac_data {
56 int rgmii_idx; /* RGMII device index or -1 */
57 int rgmii_mux; /* RGMII input of this EMAC */
58 int zmii_idx; /* ZMII device index or -1 */
59 int zmii_mux; /* ZMII input of this EMAC */
60 int mal_idx; /* MAL device index */
61 int mal_rx_chan; /* MAL rx channel number */
62 int mal_tx_chan; /* MAL tx channel number */
63 int wol_irq; /* WOL interrupt */
64 int mdio_idx; /* EMAC idx of MDIO master or -1 */
65 int tah_idx; /* TAH device index or -1 */
66 int jumbo; /* Jumbo frames capable flag */
67 int phy_mode; /* PHY type or configurable mode */
68 u8 mac_addr[6]; /* EMAC mac address */
69 u32 phy_map; /* EMAC phy map */
70};
71
72/* Sysfs support */
73#define OCP_SYSFS_EMAC_DATA() \
74OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx) \
75OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux) \
76OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx) \
77OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_rx_chan) \
78OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan) \
79OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq) \
80OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx) \
81 \
82void ocp_show_emac_data(struct device *dev) \
83{ \
84 device_create_file(dev, &dev_attr_emac_zmii_idx); \
85 device_create_file(dev, &dev_attr_emac_zmii_mux); \
86 device_create_file(dev, &dev_attr_emac_mal_idx); \
87 device_create_file(dev, &dev_attr_emac_mal_rx_chan); \
88 device_create_file(dev, &dev_attr_emac_mal_tx_chan); \
89 device_create_file(dev, &dev_attr_emac_wol_irq); \
90 device_create_file(dev, &dev_attr_emac_mdio_idx); \
91}
92
93#ifdef CONFIG_40x
94/*
95 * Helper function to copy MAC addresses from the bd_t to OCP EMAC
96 * additions.
97 *
98 * The range of EMAC indices (inclusive) to be copied are the arguments.
99 */
100static inline void ibm_ocp_set_emac(int start, int end)
101{
102 int i;
103 struct ocp_def *def;
104
105 /* Copy MAC addresses to EMAC additions */
106 for (i=start; i<=end; i++) {
107 def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
108 memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr,
109 &__res.bi_enetaddr[i],
110 6);
111 }
112}
113#endif
114
115/*
116 * MAL additional data and sysfs support
117 */
118struct ocp_func_mal_data {
119 int num_tx_chans; /* Number of TX channels */
120 int num_rx_chans; /* Number of RX channels */
121 int txeob_irq; /* TX End Of Buffer IRQ */
122 int rxeob_irq; /* RX End Of Buffer IRQ */
123 int txde_irq; /* TX Descriptor Error IRQ */
124 int rxde_irq; /* RX Descriptor Error IRQ */
125 int serr_irq; /* MAL System Error IRQ */
126};
127
128#define OCP_SYSFS_MAL_DATA() \
129OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_tx_chans) \
130OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_rx_chans) \
131OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txeob_irq) \
132OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxeob_irq) \
133OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txde_irq) \
134OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxde_irq) \
135OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, serr_irq) \
136 \
137void ocp_show_mal_data(struct device *dev) \
138{ \
139 device_create_file(dev, &dev_attr_mal_num_tx_chans); \
140 device_create_file(dev, &dev_attr_mal_num_rx_chans); \
141 device_create_file(dev, &dev_attr_mal_txeob_irq); \
142 device_create_file(dev, &dev_attr_mal_rxeob_irq); \
143 device_create_file(dev, &dev_attr_mal_txde_irq); \
144 device_create_file(dev, &dev_attr_mal_rxde_irq); \
145 device_create_file(dev, &dev_attr_mal_serr_irq); \
146}
147
148/*
149 * IIC additional data and sysfs support
150 */
151struct ocp_func_iic_data {
152 int fast_mode; /* IIC fast mode enabled */
153};
154
155#define OCP_SYSFS_IIC_DATA() \
156OCP_SYSFS_ADDTL(struct ocp_func_iic_data, "%d\n", iic, fast_mode) \
157 \
158void ocp_show_iic_data(struct device *dev) \
159{ \
160 device_create_file(dev, &dev_attr_iic_fast_mode); \
161}
162#endif /* __IBM_OCP_H__ */
163#endif /* __KERNEL__ */