blob: c0498d3baf931fe71c8d656b4146844a471d67dc [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/* $Id: memreg.h,v 1.8 1996/08/29 09:48:23 davem Exp $ */
2#ifndef _SPARC_MEMREG_H
3#define _SPARC_MEMREG_H
4/* memreg.h: Definitions of the values found in the synchronous
5 * and asynchronous memory error registers when a fault
6 * occurs on the sun4c.
7 *
8 * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
9 */
10
11/* First the synchronous error codes, these are usually just
12 * normal page faults.
13 */
14
15#define SUN4C_SYNC_WDRESET 0x0001 /* watchdog reset */
16#define SUN4C_SYNC_SIZE 0x0002 /* bad access size? whuz this? */
17#define SUN4C_SYNC_PARITY 0x0008 /* bad ram chips caused a parity error */
18#define SUN4C_SYNC_SBUS 0x0010 /* the SBUS had some problems... */
19#define SUN4C_SYNC_NOMEM 0x0020 /* translation to non-existent ram */
20#define SUN4C_SYNC_PROT 0x0040 /* access violated pte protections */
21#define SUN4C_SYNC_NPRESENT 0x0080 /* pte said that page was not present */
22#define SUN4C_SYNC_BADWRITE 0x8000 /* while writing something went bogus */
23
24#define SUN4C_SYNC_BOLIXED \
25 (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \
26 SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY)
27
28/* Now the asynchronous error codes, these are almost always produced
29 * by the cache writing things back to memory and getting a bad translation.
30 * Bad DVMA transactions can cause these faults too.
31 */
32
33#define SUN4C_ASYNC_BADDVMA 0x0010 /* error during DVMA access */
34#define SUN4C_ASYNC_NOMEM 0x0020 /* write back pointed to bad phys addr */
35#define SUN4C_ASYNC_BADWB 0x0080 /* write back points to non-present page */
36
37/* Memory parity error register with associated bit constants. */
38#ifndef __ASSEMBLY__
39extern __volatile__ unsigned long *sun4c_memerr_reg;
40#endif
41
42#define SUN4C_MPE_ERROR 0x80 /* Parity error detected. (ro) */
43#define SUN4C_MPE_MULTI 0x40 /* Multiple parity errors detected. (ro) */
44#define SUN4C_MPE_TEST 0x20 /* Write inverse parity. (rw) */
45#define SUN4C_MPE_CHECK 0x10 /* Enable parity checking. (rw) */
46#define SUN4C_MPE_ERR00 0x08 /* Parity error in bits 0-7. (ro) */
47#define SUN4C_MPE_ERR08 0x04 /* Parity error in bits 8-15. (ro) */
48#define SUN4C_MPE_ERR16 0x02 /* Parity error in bits 16-23. (ro) */
49#define SUN4C_MPE_ERR24 0x01 /* Parity error in bits 24-31. (ro) */
50#define SUN4C_MPE_ERRS 0x0F /* Bit mask for the error bits. (ro) */
51
52#endif /* !(_SPARC_MEMREG_H) */