blob: e4e3241628d615bb752d99c3cfc18c2ab4e0124e [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 Written 1997-1998 by Donald Becker.
3
4 This software may be used and distributed according to the terms
5 of the GNU General Public License, incorporated herein by reference.
6
7 This driver is for the 3Com ISA EtherLink XL "Corkscrew" 3c515 ethercard.
8
9 The author may be reached as becker@scyld.com, or C/O
10 Scyld Computing Corporation
11 410 Severn Ave., Suite 210
12 Annapolis MD 21403
13
14
Jeff Garzik6aa20a22006-09-13 13:24:59 -040015 2000/2/2- Added support for kernel-level ISAPnP
Linus Torvalds1da177e2005-04-16 15:20:36 -070016 by Stephen Frost <sfrost@snowman.net> and Alessandro Zummo
17 Cleaned up for 2.3.x/softnet by Jeff Garzik and Alan Cox.
Jeff Garzik6aa20a22006-09-13 13:24:59 -040018
Linus Torvalds1da177e2005-04-16 15:20:36 -070019 2001/11/17 - Added ethtool support (jgarzik)
Jeff Garzik6aa20a22006-09-13 13:24:59 -040020
Linus Torvalds1da177e2005-04-16 15:20:36 -070021 2002/10/28 - Locking updates for 2.5 (alan@redhat.com)
22
23*/
24
25#define DRV_NAME "3c515"
26#define DRV_VERSION "0.99t-ac"
27#define DRV_RELDATE "28-Oct-2002"
28
29static char *version =
30DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " becker@scyld.com and others\n";
31
32#define CORKSCREW 1
33
34/* "Knobs" that adjust features and parameters. */
35/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
36 Setting to > 1512 effectively disables this feature. */
37static int rx_copybreak = 200;
38
39/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */
40static const int mtu = 1500;
41
42/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
43static int max_interrupt_work = 20;
44
45/* Enable the automatic media selection code -- usually set. */
46#define AUTOMEDIA 1
47
48/* Allow the use of fragment bus master transfers instead of only
49 programmed-I/O for Vortex cards. Full-bus-master transfers are always
50 enabled by default on Boomerang cards. If VORTEX_BUS_MASTER is defined,
51 the feature may be turned on using 'options'. */
52#define VORTEX_BUS_MASTER
53
54/* A few values that may be tweaked. */
55/* Keep the ring sizes a power of two for efficiency. */
56#define TX_RING_SIZE 16
57#define RX_RING_SIZE 16
58#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */
59
Linus Torvalds1da177e2005-04-16 15:20:36 -070060#include <linux/module.h>
61#include <linux/isapnp.h>
62#include <linux/kernel.h>
63#include <linux/netdevice.h>
64#include <linux/string.h>
65#include <linux/errno.h>
66#include <linux/in.h>
67#include <linux/ioport.h>
68#include <linux/slab.h>
69#include <linux/skbuff.h>
70#include <linux/etherdevice.h>
71#include <linux/interrupt.h>
72#include <linux/timer.h>
73#include <linux/ethtool.h>
74#include <linux/bitops.h>
75
76#include <asm/uaccess.h>
77#include <asm/io.h>
78#include <asm/dma.h>
79
80#define NEW_MULTICAST
81#include <linux/delay.h>
82
83#define MAX_UNITS 8
84
85MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
86MODULE_DESCRIPTION("3Com 3c515 Corkscrew driver");
87MODULE_LICENSE("GPL");
88MODULE_VERSION(DRV_VERSION);
89
90/* "Knobs" for adjusting internal parameters. */
91/* Put out somewhat more debugging messages. (0 - no msg, 1 minimal msgs). */
92#define DRIVER_DEBUG 1
93/* Some values here only for performance evaluation and path-coverage
94 debugging. */
95static int rx_nocopy, rx_copy, queued_packet;
96
97/* Number of times to check to see if the Tx FIFO has space, used in some
98 limited cases. */
99#define WAIT_TX_AVAIL 200
100
101/* Operational parameter that usually are not changed. */
102#define TX_TIMEOUT 40 /* Time in jiffies before concluding Tx hung */
103
104/* The size here is somewhat misleading: the Corkscrew also uses the ISA
105 aliased registers at <base>+0x400.
106 */
107#define CORKSCREW_TOTAL_SIZE 0x20
108
109#ifdef DRIVER_DEBUG
110static int corkscrew_debug = DRIVER_DEBUG;
111#else
112static int corkscrew_debug = 1;
113#endif
114
115#define CORKSCREW_ID 10
116
117/*
118 Theory of Operation
119
120I. Board Compatibility
121
122This device driver is designed for the 3Com 3c515 ISA Fast EtherLink XL,
1233Com's ISA bus adapter for Fast Ethernet. Due to the unique I/O port layout,
124it's not practical to integrate this driver with the other EtherLink drivers.
125
126II. Board-specific settings
127
128The Corkscrew has an EEPROM for configuration, but no special settings are
129needed for Linux.
130
131III. Driver operation
132
133The 3c515 series use an interface that's very similar to the 3c900 "Boomerang"
134PCI cards, with the bus master interface extensively modified to work with
135the ISA bus.
136
137The card is capable of full-bus-master transfers with separate
138lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet,
139DEC Tulip and Intel Speedo3.
140
141This driver uses a "RX_COPYBREAK" scheme rather than a fixed intermediate
142receive buffer. This scheme allocates full-sized skbuffs as receive
143buffers. The value RX_COPYBREAK is used as the copying breakpoint: it is
144chosen to trade-off the memory wasted by passing the full-sized skbuff to
145the queue layer for all frames vs. the copying cost of copying a frame to a
146correctly-sized skbuff.
147
148
149IIIC. Synchronization
150The driver runs as two independent, single-threaded flows of control. One
151is the send-packet routine, which enforces single-threaded use by the netif
152layer. The other thread is the interrupt handler, which is single
153threaded by the hardware and other software.
154
155IV. Notes
156
157Thanks to Terry Murphy of 3Com for providing documentation and a development
158board.
159
160The names "Vortex", "Boomerang" and "Corkscrew" are the internal 3Com
161project names. I use these names to eliminate confusion -- 3Com product
162numbers and names are very similar and often confused.
163
164The new chips support both ethernet (1.5K) and FDDI (4.5K) frame sizes!
165This driver only supports ethernet frames because of the recent MTU limit
166of 1.5K, but the changes to support 4.5K are minimal.
167*/
168
169/* Operational definitions.
170 These are not used by other compilation units and thus are not
171 exported in a ".h" file.
172
173 First the windows. There are eight register windows, with the command
174 and status registers available in each.
175 */
176#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
177#define EL3_CMD 0x0e
178#define EL3_STATUS 0x0e
179
180/* The top five bits written to EL3_CMD are a command, the lower
181 11 bits are the parameter, if applicable.
182 Note that 11 parameters bits was fine for ethernet, but the new chips
183 can handle FDDI length frames (~4500 octets) and now parameters count
184 32-bit 'Dwords' rather than octets. */
185
186enum corkscrew_cmd {
187 TotalReset = 0 << 11, SelectWindow = 1 << 11, StartCoax = 2 << 11,
188 RxDisable = 3 << 11, RxEnable = 4 << 11, RxReset = 5 << 11,
189 UpStall = 6 << 11, UpUnstall = (6 << 11) + 1, DownStall = (6 << 11) + 2,
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400190 DownUnstall = (6 << 11) + 3, RxDiscard = 8 << 11, TxEnable = 9 << 11,
191 TxDisable = 10 << 11, TxReset = 11 << 11, FakeIntr = 12 << 11,
192 AckIntr = 13 << 11, SetIntrEnb = 14 << 11, SetStatusEnb = 15 << 11,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700193 SetRxFilter = 16 << 11, SetRxThreshold = 17 << 11,
194 SetTxThreshold = 18 << 11, SetTxStart = 19 << 11, StartDMAUp = 20 << 11,
195 StartDMADown = (20 << 11) + 1, StatsEnable = 21 << 11,
196 StatsDisable = 22 << 11, StopCoax = 23 << 11,
197};
198
199/* The SetRxFilter command accepts the following classes: */
200enum RxFilter {
201 RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
202};
203
204/* Bits in the general status register. */
205enum corkscrew_status {
206 IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
207 TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
208 IntReq = 0x0040, StatsFull = 0x0080,
209 DMADone = 1 << 8, DownComplete = 1 << 9, UpComplete = 1 << 10,
210 DMAInProgress = 1 << 11, /* DMA controller is still busy. */
211 CmdInProgress = 1 << 12, /* EL3_CMD is still busy. */
212};
213
214/* Register window 1 offsets, the window used in normal operation.
215 On the Corkscrew this window is always mapped at offsets 0x10-0x1f. */
216enum Window1 {
217 TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14,
218 RxStatus = 0x18, Timer = 0x1A, TxStatus = 0x1B,
219 TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */
220};
221enum Window0 {
222 Wn0IRQ = 0x08,
223#if defined(CORKSCREW)
224 Wn0EepromCmd = 0x200A, /* Corkscrew EEPROM command register. */
225 Wn0EepromData = 0x200C, /* Corkscrew EEPROM results register. */
226#else
227 Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */
228 Wn0EepromData = 12, /* Window 0: EEPROM results register. */
229#endif
230};
231enum Win0_EEPROM_bits {
232 EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0,
233 EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */
234 EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */
235};
236
237/* EEPROM locations. */
238enum eeprom_offset {
239 PhysAddr01 = 0, PhysAddr23 = 1, PhysAddr45 = 2, ModelID = 3,
240 EtherLink3ID = 7,
241};
242
243enum Window3 { /* Window 3: MAC/config bits. */
244 Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8,
245};
Al Virob6659822008-01-13 14:17:35 +0000246enum wn3_config {
247 Ram_size = 7,
248 Ram_width = 8,
249 Ram_speed = 0x30,
250 Rom_size = 0xc0,
251 Ram_split_shift = 16,
252 Ram_split = 3 << Ram_split_shift,
253 Xcvr_shift = 20,
254 Xcvr = 7 << Xcvr_shift,
255 Autoselect = 0x1000000,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700256};
257
258enum Window4 {
259 Wn4_NetDiag = 6, Wn4_Media = 10, /* Window 4: Xcvr/media bits. */
260};
261enum Win4_Media_bits {
262 Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */
263 Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */
264 Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */
265 Media_LnkBeat = 0x0800,
266};
267enum Window7 { /* Window 7: Bus Master control. */
268 Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12,
269};
270
271/* Boomerang-style bus master control registers. Note ISA aliases! */
272enum MasterCtrl {
273 PktStatus = 0x400, DownListPtr = 0x404, FragAddr = 0x408, FragLen =
274 0x40c,
275 TxFreeThreshold = 0x40f, UpPktStatus = 0x410, UpListPtr = 0x418,
276};
277
278/* The Rx and Tx descriptor lists.
279 Caution Alpha hackers: these types are 32 bits! Note also the 8 byte
280 alignment contraint on tx_ring[] and rx_ring[]. */
281struct boom_rx_desc {
282 u32 next;
283 s32 status;
284 u32 addr;
285 s32 length;
286};
287
288/* Values for the Rx status entry. */
289enum rx_desc_status {
290 RxDComplete = 0x00008000, RxDError = 0x4000,
291 /* See boomerang_rx() for actual error bits */
292};
293
294struct boom_tx_desc {
295 u32 next;
296 s32 status;
297 u32 addr;
298 s32 length;
299};
300
301struct corkscrew_private {
302 const char *product_name;
303 struct list_head list;
304 struct net_device *our_dev;
305 /* The Rx and Tx rings are here to keep them quad-word-aligned. */
306 struct boom_rx_desc rx_ring[RX_RING_SIZE];
307 struct boom_tx_desc tx_ring[TX_RING_SIZE];
308 /* The addresses of transmit- and receive-in-place skbuffs. */
309 struct sk_buff *rx_skbuff[RX_RING_SIZE];
310 struct sk_buff *tx_skbuff[TX_RING_SIZE];
311 unsigned int cur_rx, cur_tx; /* The next free ring entry */
312 unsigned int dirty_rx, dirty_tx;/* The ring entries to be free()ed. */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700313 struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */
314 struct timer_list timer; /* Media selection timer. */
315 int capabilities ; /* Adapter capabilities word. */
316 int options; /* User-settable misc. driver options. */
317 int last_rx_packets; /* For media autoselection. */
318 unsigned int available_media:8, /* From Wn3_Options */
319 media_override:3, /* Passed-in media type. */
320 default_media:3, /* Read from the EEPROM. */
321 full_duplex:1, autoselect:1, bus_master:1, /* Vortex can only do a fragment bus-m. */
322 full_bus_master_tx:1, full_bus_master_rx:1, /* Boomerang */
323 tx_full:1;
324 spinlock_t lock;
325 struct device *dev;
326};
327
328/* The action to take with a media selection timer tick.
329 Note that we deviate from the 3Com order by checking 10base2 before AUI.
330 */
331enum xcvr_types {
332 XCVR_10baseT = 0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx,
333 XCVR_100baseFx, XCVR_MII = 6, XCVR_Default = 8,
334};
335
336static struct media_table {
337 char *name;
338 unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */
339 mask:8, /* The transceiver-present bit in Wn3_Config. */
340 next:8; /* The media type to try next. */
341 short wait; /* Time before we check media status. */
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400342} media_tbl[] = {
343 { "10baseT", Media_10TP, 0x08, XCVR_10base2, (14 * HZ) / 10 },
344 { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1 * HZ) / 10},
345 { "undefined", 0, 0x80, XCVR_10baseT, 10000},
346 { "10base2", 0, 0x10, XCVR_AUI, (1 * HZ) / 10},
347 { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14 * HZ) / 10},
348 { "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14 * HZ) / 10},
349 { "MII", 0, 0x40, XCVR_10baseT, 3 * HZ},
350 { "undefined", 0, 0x01, XCVR_10baseT, 10000},
Linus Torvalds1da177e2005-04-16 15:20:36 -0700351 { "Default", 0, 0xFF, XCVR_10baseT, 10000},
352};
353
354#ifdef __ISAPNP__
355static struct isapnp_device_id corkscrew_isapnp_adapters[] = {
356 { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
357 ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5051),
358 (long) "3Com Fast EtherLink ISA" },
359 { } /* terminate list */
360};
361
362MODULE_DEVICE_TABLE(isapnp, corkscrew_isapnp_adapters);
363
364static int nopnp;
365#endif /* __ISAPNP__ */
366
367static struct net_device *corkscrew_scan(int unit);
b1fc5502005-05-12 20:11:55 -0400368static int corkscrew_setup(struct net_device *dev, int ioaddr,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700369 struct pnp_dev *idev, int card_number);
370static int corkscrew_open(struct net_device *dev);
371static void corkscrew_timer(unsigned long arg);
372static int corkscrew_start_xmit(struct sk_buff *skb,
373 struct net_device *dev);
374static int corkscrew_rx(struct net_device *dev);
375static void corkscrew_timeout(struct net_device *dev);
376static int boomerang_rx(struct net_device *dev);
David Howells7d12e782006-10-05 14:55:46 +0100377static irqreturn_t corkscrew_interrupt(int irq, void *dev_id);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700378static int corkscrew_close(struct net_device *dev);
379static void update_stats(int addr, struct net_device *dev);
380static struct net_device_stats *corkscrew_get_stats(struct net_device *dev);
381static void set_rx_mode(struct net_device *dev);
Jeff Garzik7282d492006-09-13 14:30:00 -0400382static const struct ethtool_ops netdev_ethtool_ops;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700383
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400384
385/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700386 Unfortunately maximizing the shared code between the integrated and
387 module version of the driver results in a complicated set of initialization
388 procedures.
389 init_module() -- modules / tc59x_init() -- built-in
390 The wrappers for corkscrew_scan()
391 corkscrew_scan() The common routine that scans for PCI and EISA cards
392 corkscrew_found_device() Allocate a device structure when we find a card.
393 Different versions exist for modules and built-in.
394 corkscrew_probe1() Fill in the device structure -- this is separated
395 so that the modules code can put it in dev->init.
396*/
397/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
398/* Note: this is the only limit on the number of cards supported!! */
399static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1, };
400
401#ifdef MODULE
402static int debug = -1;
403
404module_param(debug, int, 0);
405module_param_array(options, int, NULL, 0);
406module_param(rx_copybreak, int, 0);
407module_param(max_interrupt_work, int, 0);
408MODULE_PARM_DESC(debug, "3c515 debug level (0-6)");
409MODULE_PARM_DESC(options, "3c515: Bits 0-2: media type, bit 3: full duplex, bit 4: bus mastering");
410MODULE_PARM_DESC(rx_copybreak, "3c515 copy breakpoint for copy-only-tiny-frames");
411MODULE_PARM_DESC(max_interrupt_work, "3c515 maximum events handled per interrupt");
412
413/* A list of all installed Vortex devices, for removing the driver module. */
414/* we will need locking (and refcounting) if we ever use it for more */
415static LIST_HEAD(root_corkscrew_dev);
416
417int init_module(void)
418{
419 int found = 0;
420 if (debug >= 0)
421 corkscrew_debug = debug;
422 if (corkscrew_debug)
423 printk(version);
424 while (corkscrew_scan(-1))
425 found++;
426 return found ? 0 : -ENODEV;
427}
428
429#else
430struct net_device *tc515_probe(int unit)
431{
432 struct net_device *dev = corkscrew_scan(unit);
433 static int printed;
434
435 if (!dev)
436 return ERR_PTR(-ENODEV);
437
438 if (corkscrew_debug > 0 && !printed) {
439 printed = 1;
440 printk(version);
441 }
442
443 return dev;
444}
445#endif /* not MODULE */
446
447static int check_device(unsigned ioaddr)
448{
449 int timer;
450
451 if (!request_region(ioaddr, CORKSCREW_TOTAL_SIZE, "3c515"))
452 return 0;
453 /* Check the resource configuration for a matching ioaddr. */
454 if ((inw(ioaddr + 0x2002) & 0x1f0) != (ioaddr & 0x1f0)) {
455 release_region(ioaddr, CORKSCREW_TOTAL_SIZE);
456 return 0;
457 }
458 /* Verify by reading the device ID from the EEPROM. */
459 outw(EEPROM_Read + 7, ioaddr + Wn0EepromCmd);
460 /* Pause for at least 162 us. for the read to take place. */
461 for (timer = 4; timer >= 0; timer--) {
462 udelay(162);
463 if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0)
464 break;
465 }
466 if (inw(ioaddr + Wn0EepromData) != 0x6d50) {
467 release_region(ioaddr, CORKSCREW_TOTAL_SIZE);
468 return 0;
469 }
470 return 1;
471}
472
473static void cleanup_card(struct net_device *dev)
474{
475 struct corkscrew_private *vp = netdev_priv(dev);
476 list_del_init(&vp->list);
477 if (dev->dma)
478 free_dma(dev->dma);
479 outw(TotalReset, dev->base_addr + EL3_CMD);
480 release_region(dev->base_addr, CORKSCREW_TOTAL_SIZE);
481 if (vp->dev)
482 pnp_device_detach(to_pnp_dev(vp->dev));
483}
484
485static struct net_device *corkscrew_scan(int unit)
486{
487 struct net_device *dev;
488 static int cards_found = 0;
489 static int ioaddr;
490 int err;
491#ifdef __ISAPNP__
492 short i;
493 static int pnp_cards;
494#endif
495
496 dev = alloc_etherdev(sizeof(struct corkscrew_private));
497 if (!dev)
498 return ERR_PTR(-ENOMEM);
499
500 if (unit >= 0) {
501 sprintf(dev->name, "eth%d", unit);
502 netdev_boot_setup_check(dev);
503 }
504
Linus Torvalds1da177e2005-04-16 15:20:36 -0700505#ifdef __ISAPNP__
506 if(nopnp == 1)
507 goto no_pnp;
508 for(i=0; corkscrew_isapnp_adapters[i].vendor != 0; i++) {
509 struct pnp_dev *idev = NULL;
510 int irq;
511 while((idev = pnp_find_dev(NULL,
512 corkscrew_isapnp_adapters[i].vendor,
513 corkscrew_isapnp_adapters[i].function,
514 idev))) {
515
516 if (pnp_device_attach(idev) < 0)
517 continue;
518 if (pnp_activate_dev(idev) < 0) {
519 printk("pnp activate failed (out of resources?)\n");
520 pnp_device_detach(idev);
521 continue;
522 }
523 if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0)) {
524 pnp_device_detach(idev);
525 continue;
526 }
527 ioaddr = pnp_port_start(idev, 0);
528 irq = pnp_irq(idev, 0);
529 if (!check_device(ioaddr)) {
530 pnp_device_detach(idev);
531 continue;
532 }
533 if(corkscrew_debug)
534 printk ("ISAPNP reports %s at i/o 0x%x, irq %d\n",
535 (char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq);
536 printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
537 inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
538 /* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700539 SET_NETDEV_DEV(dev, &idev->dev);
540 pnp_cards++;
b1fc5502005-05-12 20:11:55 -0400541 err = corkscrew_setup(dev, ioaddr, idev, cards_found++);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700542 if (!err)
543 return dev;
544 cleanup_card(dev);
545 }
546 }
547no_pnp:
548#endif /* __ISAPNP__ */
549
550 /* Check all locations on the ISA bus -- evil! */
551 for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x20) {
552 if (!check_device(ioaddr))
553 continue;
554
555 printk(KERN_INFO "3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
556 inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
b1fc5502005-05-12 20:11:55 -0400557 err = corkscrew_setup(dev, ioaddr, NULL, cards_found++);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700558 if (!err)
559 return dev;
560 cleanup_card(dev);
561 }
562 free_netdev(dev);
563 return NULL;
564}
565
b1fc5502005-05-12 20:11:55 -0400566static int corkscrew_setup(struct net_device *dev, int ioaddr,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700567 struct pnp_dev *idev, int card_number)
568{
569 struct corkscrew_private *vp = netdev_priv(dev);
570 unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */
571 int i;
572 int irq;
Joe Perches0795af52007-10-03 17:59:30 -0700573 DECLARE_MAC_BUF(mac);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700574
Randy Dunlap92fbc1c2008-05-16 10:35:24 -0700575#ifdef __ISAPNP__
Linus Torvalds1da177e2005-04-16 15:20:36 -0700576 if (idev) {
577 irq = pnp_irq(idev, 0);
578 vp->dev = &idev->dev;
579 } else {
580 irq = inw(ioaddr + 0x2002) & 15;
581 }
Randy Dunlap92fbc1c2008-05-16 10:35:24 -0700582#else
583 irq = inw(ioaddr + 0x2002) & 15;
584#endif
Linus Torvalds1da177e2005-04-16 15:20:36 -0700585
586 dev->base_addr = ioaddr;
587 dev->irq = irq;
588 dev->dma = inw(ioaddr + 0x2000) & 7;
589 vp->product_name = "3c515";
590 vp->options = dev->mem_start;
591 vp->our_dev = dev;
592
593 if (!vp->options) {
594 if (card_number >= MAX_UNITS)
595 vp->options = -1;
596 else
597 vp->options = options[card_number];
598 }
599
600 if (vp->options >= 0) {
601 vp->media_override = vp->options & 7;
602 if (vp->media_override == 2)
603 vp->media_override = 0;
604 vp->full_duplex = (vp->options & 8) ? 1 : 0;
605 vp->bus_master = (vp->options & 16) ? 1 : 0;
606 } else {
607 vp->media_override = 7;
608 vp->full_duplex = 0;
609 vp->bus_master = 0;
610 }
611#ifdef MODULE
612 list_add(&vp->list, &root_corkscrew_dev);
613#endif
614
615 printk(KERN_INFO "%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
616
617 spin_lock_init(&vp->lock);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400618
Linus Torvalds1da177e2005-04-16 15:20:36 -0700619 /* Read the station address from the EEPROM. */
620 EL3WINDOW(0);
621 for (i = 0; i < 0x18; i++) {
Al Virob6659822008-01-13 14:17:35 +0000622 __be16 *phys_addr = (__be16 *) dev->dev_addr;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700623 int timer;
624 outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd);
625 /* Pause for at least 162 us. for the read to take place. */
626 for (timer = 4; timer >= 0; timer--) {
627 udelay(162);
628 if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0)
629 break;
630 }
631 eeprom[i] = inw(ioaddr + Wn0EepromData);
632 checksum ^= eeprom[i];
633 if (i < 3)
634 phys_addr[i] = htons(eeprom[i]);
635 }
636 checksum = (checksum ^ (checksum >> 8)) & 0xff;
637 if (checksum != 0x00)
638 printk(" ***INVALID CHECKSUM %4.4x*** ", checksum);
Joe Perches0795af52007-10-03 17:59:30 -0700639 printk(" %s", print_mac(mac, dev->dev_addr));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700640 if (eeprom[16] == 0x11c7) { /* Corkscrew */
641 if (request_dma(dev->dma, "3c515")) {
642 printk(", DMA %d allocation failed", dev->dma);
643 dev->dma = 0;
644 } else
645 printk(", DMA %d", dev->dma);
646 }
647 printk(", IRQ %d\n", dev->irq);
648 /* Tell them about an invalid IRQ. */
649 if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15))
650 printk(KERN_WARNING " *** Warning: this IRQ is unlikely to work! ***\n");
651
652 {
653 char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" };
Al Virob6659822008-01-13 14:17:35 +0000654 __u32 config;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700655 EL3WINDOW(3);
656 vp->available_media = inw(ioaddr + Wn3_Options);
Al Virob6659822008-01-13 14:17:35 +0000657 config = inl(ioaddr + Wn3_Config);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700658 if (corkscrew_debug > 1)
659 printk(KERN_INFO " Internal config register is %4.4x, transceivers %#x.\n",
Al Virob6659822008-01-13 14:17:35 +0000660 config, inw(ioaddr + Wn3_Options));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700661 printk(KERN_INFO " %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
Al Virob6659822008-01-13 14:17:35 +0000662 8 << config & Ram_size,
663 config & Ram_width ? "word" : "byte",
664 ram_split[(config & Ram_split) >> Ram_split_shift],
665 config & Autoselect ? "autoselect/" : "",
666 media_tbl[(config & Xcvr) >> Xcvr_shift].name);
667 vp->default_media = (config & Xcvr) >> Xcvr_shift;
668 vp->autoselect = config & Autoselect ? 1 : 0;
669 dev->if_port = vp->default_media;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700670 }
671 if (vp->media_override != 7) {
672 printk(KERN_INFO " Media override to transceiver type %d (%s).\n",
673 vp->media_override,
674 media_tbl[vp->media_override].name);
675 dev->if_port = vp->media_override;
676 }
677
678 vp->capabilities = eeprom[16];
679 vp->full_bus_master_tx = (vp->capabilities & 0x20) ? 1 : 0;
680 /* Rx is broken at 10mbps, so we always disable it. */
681 /* vp->full_bus_master_rx = 0; */
682 vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0;
683
684 /* The 3c51x-specific entries in the device structure. */
685 dev->open = &corkscrew_open;
686 dev->hard_start_xmit = &corkscrew_start_xmit;
687 dev->tx_timeout = &corkscrew_timeout;
688 dev->watchdog_timeo = (400 * HZ) / 1000;
689 dev->stop = &corkscrew_close;
690 dev->get_stats = &corkscrew_get_stats;
691 dev->set_multicast_list = &set_rx_mode;
692 dev->ethtool_ops = &netdev_ethtool_ops;
b1fc5502005-05-12 20:11:55 -0400693
694 return register_netdev(dev);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700695}
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400696
Linus Torvalds1da177e2005-04-16 15:20:36 -0700697
698static int corkscrew_open(struct net_device *dev)
699{
700 int ioaddr = dev->base_addr;
701 struct corkscrew_private *vp = netdev_priv(dev);
Al Virob6659822008-01-13 14:17:35 +0000702 __u32 config;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700703 int i;
704
705 /* Before initializing select the active media port. */
706 EL3WINDOW(3);
707 if (vp->full_duplex)
708 outb(0x20, ioaddr + Wn3_MAC_Ctrl); /* Set the full-duplex bit. */
Al Virob6659822008-01-13 14:17:35 +0000709 config = inl(ioaddr + Wn3_Config);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700710
711 if (vp->media_override != 7) {
712 if (corkscrew_debug > 1)
713 printk(KERN_INFO "%s: Media override to transceiver %d (%s).\n",
714 dev->name, vp->media_override,
715 media_tbl[vp->media_override].name);
716 dev->if_port = vp->media_override;
717 } else if (vp->autoselect) {
718 /* Find first available media type, starting with 100baseTx. */
719 dev->if_port = 4;
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400720 while (!(vp->available_media & media_tbl[dev->if_port].mask))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700721 dev->if_port = media_tbl[dev->if_port].next;
722
723 if (corkscrew_debug > 1)
724 printk("%s: Initial media type %s.\n",
725 dev->name, media_tbl[dev->if_port].name);
726
727 init_timer(&vp->timer);
728 vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
729 vp->timer.data = (unsigned long) dev;
730 vp->timer.function = &corkscrew_timer; /* timer handler */
731 add_timer(&vp->timer);
732 } else
733 dev->if_port = vp->default_media;
734
Al Virob6659822008-01-13 14:17:35 +0000735 config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
736 outl(config, ioaddr + Wn3_Config);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700737
738 if (corkscrew_debug > 1) {
739 printk("%s: corkscrew_open() InternalConfig %8.8x.\n",
Al Virob6659822008-01-13 14:17:35 +0000740 dev->name, config);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700741 }
742
743 outw(TxReset, ioaddr + EL3_CMD);
744 for (i = 20; i >= 0; i--)
745 if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
746 break;
747
748 outw(RxReset, ioaddr + EL3_CMD);
749 /* Wait a few ticks for the RxReset command to complete. */
750 for (i = 20; i >= 0; i--)
751 if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
752 break;
753
754 outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
755
756 /* Use the now-standard shared IRQ implementation. */
757 if (vp->capabilities == 0x11c7) {
758 /* Corkscrew: Cannot share ISA resources. */
759 if (dev->irq == 0
760 || dev->dma == 0
761 || request_irq(dev->irq, &corkscrew_interrupt, 0,
762 vp->product_name, dev)) return -EAGAIN;
763 enable_dma(dev->dma);
764 set_dma_mode(dev->dma, DMA_MODE_CASCADE);
Thomas Gleixner1fb9df52006-07-01 19:29:39 -0700765 } else if (request_irq(dev->irq, &corkscrew_interrupt, IRQF_SHARED,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700766 vp->product_name, dev)) {
767 return -EAGAIN;
768 }
769
770 if (corkscrew_debug > 1) {
771 EL3WINDOW(4);
772 printk("%s: corkscrew_open() irq %d media status %4.4x.\n",
773 dev->name, dev->irq, inw(ioaddr + Wn4_Media));
774 }
775
776 /* Set the station address and mask in window 2 each time opened. */
777 EL3WINDOW(2);
778 for (i = 0; i < 6; i++)
779 outb(dev->dev_addr[i], ioaddr + i);
780 for (; i < 12; i += 2)
781 outw(0, ioaddr + i);
782
783 if (dev->if_port == 3)
784 /* Start the thinnet transceiver. We should really wait 50ms... */
785 outw(StartCoax, ioaddr + EL3_CMD);
786 EL3WINDOW(4);
787 outw((inw(ioaddr + Wn4_Media) & ~(Media_10TP | Media_SQE)) |
788 media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media);
789
790 /* Switch to the stats window, and clear all stats by reading. */
791 outw(StatsDisable, ioaddr + EL3_CMD);
792 EL3WINDOW(6);
793 for (i = 0; i < 10; i++)
794 inb(ioaddr + i);
795 inw(ioaddr + 10);
796 inw(ioaddr + 12);
797 /* New: On the Vortex we must also clear the BadSSD counter. */
798 EL3WINDOW(4);
799 inb(ioaddr + 12);
800 /* ..and on the Boomerang we enable the extra statistics bits. */
801 outw(0x0040, ioaddr + Wn4_NetDiag);
802
803 /* Switch to register set 7 for normal use. */
804 EL3WINDOW(7);
805
806 if (vp->full_bus_master_rx) { /* Boomerang bus master. */
807 vp->cur_rx = vp->dirty_rx = 0;
808 if (corkscrew_debug > 2)
809 printk("%s: Filling in the Rx ring.\n",
810 dev->name);
811 for (i = 0; i < RX_RING_SIZE; i++) {
812 struct sk_buff *skb;
813 if (i < (RX_RING_SIZE - 1))
814 vp->rx_ring[i].next =
815 isa_virt_to_bus(&vp->rx_ring[i + 1]);
816 else
817 vp->rx_ring[i].next = 0;
818 vp->rx_ring[i].status = 0; /* Clear complete bit. */
819 vp->rx_ring[i].length = PKT_BUF_SZ | 0x80000000;
820 skb = dev_alloc_skb(PKT_BUF_SZ);
821 vp->rx_skbuff[i] = skb;
822 if (skb == NULL)
823 break; /* Bad news! */
824 skb->dev = dev; /* Mark as being used by this device. */
825 skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
David S. Miller689be432005-06-28 15:25:31 -0700826 vp->rx_ring[i].addr = isa_virt_to_bus(skb->data);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700827 }
828 vp->rx_ring[i - 1].next = isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */
829 outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr);
830 }
831 if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */
832 vp->cur_tx = vp->dirty_tx = 0;
833 outb(PKT_BUF_SZ >> 8, ioaddr + TxFreeThreshold); /* Room for a packet. */
834 /* Clear the Tx ring. */
835 for (i = 0; i < TX_RING_SIZE; i++)
836 vp->tx_skbuff[i] = NULL;
837 outl(0, ioaddr + DownListPtr);
838 }
839 /* Set receiver mode: presumably accept b-case and phys addr only. */
840 set_rx_mode(dev);
841 outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
842
843 netif_start_queue(dev);
844
845 outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
846 outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
847 /* Allow status bits to be seen. */
848 outw(SetStatusEnb | AdapterFailure | IntReq | StatsFull |
849 (vp->full_bus_master_tx ? DownComplete : TxAvailable) |
850 (vp->full_bus_master_rx ? UpComplete : RxComplete) |
851 (vp->bus_master ? DMADone : 0), ioaddr + EL3_CMD);
852 /* Ack all pending events, and set active indicator mask. */
853 outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
854 ioaddr + EL3_CMD);
855 outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
856 | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete,
857 ioaddr + EL3_CMD);
858
859 return 0;
860}
861
862static void corkscrew_timer(unsigned long data)
863{
864#ifdef AUTOMEDIA
865 struct net_device *dev = (struct net_device *) data;
866 struct corkscrew_private *vp = netdev_priv(dev);
867 int ioaddr = dev->base_addr;
868 unsigned long flags;
869 int ok = 0;
870
871 if (corkscrew_debug > 1)
872 printk("%s: Media selection timer tick happened, %s.\n",
873 dev->name, media_tbl[dev->if_port].name);
874
875 spin_lock_irqsave(&vp->lock, flags);
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400876
Linus Torvalds1da177e2005-04-16 15:20:36 -0700877 {
878 int old_window = inw(ioaddr + EL3_CMD) >> 13;
879 int media_status;
880 EL3WINDOW(4);
881 media_status = inw(ioaddr + Wn4_Media);
882 switch (dev->if_port) {
883 case 0:
884 case 4:
885 case 5: /* 10baseT, 100baseTX, 100baseFX */
886 if (media_status & Media_LnkBeat) {
887 ok = 1;
888 if (corkscrew_debug > 1)
889 printk("%s: Media %s has link beat, %x.\n",
890 dev->name,
891 media_tbl[dev->if_port].name,
892 media_status);
893 } else if (corkscrew_debug > 1)
894 printk("%s: Media %s is has no link beat, %x.\n",
895 dev->name,
896 media_tbl[dev->if_port].name,
897 media_status);
898
899 break;
900 default: /* Other media types handled by Tx timeouts. */
901 if (corkscrew_debug > 1)
902 printk("%s: Media %s is has no indication, %x.\n",
903 dev->name,
904 media_tbl[dev->if_port].name,
905 media_status);
906 ok = 1;
907 }
908 if (!ok) {
Al Virob6659822008-01-13 14:17:35 +0000909 __u32 config;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700910
911 do {
912 dev->if_port =
913 media_tbl[dev->if_port].next;
914 }
915 while (!(vp->available_media & media_tbl[dev->if_port].mask));
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400916
Linus Torvalds1da177e2005-04-16 15:20:36 -0700917 if (dev->if_port == 8) { /* Go back to default. */
918 dev->if_port = vp->default_media;
919 if (corkscrew_debug > 1)
920 printk("%s: Media selection failing, using default %s port.\n",
921 dev->name,
922 media_tbl[dev->if_port].name);
923 } else {
924 if (corkscrew_debug > 1)
925 printk("%s: Media selection failed, now trying %s port.\n",
926 dev->name,
927 media_tbl[dev->if_port].name);
928 vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
929 add_timer(&vp->timer);
930 }
931 outw((media_status & ~(Media_10TP | Media_SQE)) |
932 media_tbl[dev->if_port].media_bits,
933 ioaddr + Wn4_Media);
934
935 EL3WINDOW(3);
Al Virob6659822008-01-13 14:17:35 +0000936 config = inl(ioaddr + Wn3_Config);
937 config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
938 outl(config, ioaddr + Wn3_Config);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700939
940 outw(dev->if_port == 3 ? StartCoax : StopCoax,
941 ioaddr + EL3_CMD);
942 }
943 EL3WINDOW(old_window);
944 }
Jeff Garzik6aa20a22006-09-13 13:24:59 -0400945
Linus Torvalds1da177e2005-04-16 15:20:36 -0700946 spin_unlock_irqrestore(&vp->lock, flags);
947 if (corkscrew_debug > 1)
948 printk("%s: Media selection timer finished, %s.\n",
949 dev->name, media_tbl[dev->if_port].name);
950
951#endif /* AUTOMEDIA */
952 return;
953}
954
955static void corkscrew_timeout(struct net_device *dev)
956{
957 int i;
958 struct corkscrew_private *vp = netdev_priv(dev);
959 int ioaddr = dev->base_addr;
960
961 printk(KERN_WARNING
962 "%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
963 dev->name, inb(ioaddr + TxStatus),
964 inw(ioaddr + EL3_STATUS));
965 /* Slight code bloat to be user friendly. */
966 if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
967 printk(KERN_WARNING
968 "%s: Transmitter encountered 16 collisions -- network"
969 " network cable problem?\n", dev->name);
970#ifndef final_version
971 printk(" Flags; bus-master %d, full %d; dirty %d current %d.\n",
972 vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx,
973 vp->cur_tx);
974 printk(" Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
975 &vp->tx_ring[0]);
976 for (i = 0; i < TX_RING_SIZE; i++) {
977 printk(" %d: %p length %8.8x status %8.8x\n", i,
978 &vp->tx_ring[i],
979 vp->tx_ring[i].length, vp->tx_ring[i].status);
980 }
981#endif
982 /* Issue TX_RESET and TX_START commands. */
983 outw(TxReset, ioaddr + EL3_CMD);
984 for (i = 20; i >= 0; i--)
985 if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
986 break;
987 outw(TxEnable, ioaddr + EL3_CMD);
988 dev->trans_start = jiffies;
Paulius Zaleckasdfd44152008-04-29 03:07:31 +0300989 dev->stats.tx_errors++;
990 dev->stats.tx_dropped++;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700991 netif_wake_queue(dev);
992}
993
994static int corkscrew_start_xmit(struct sk_buff *skb,
995 struct net_device *dev)
996{
997 struct corkscrew_private *vp = netdev_priv(dev);
998 int ioaddr = dev->base_addr;
999
1000 /* Block a timer-based transmit from overlapping. */
1001
1002 netif_stop_queue(dev);
1003
1004 if (vp->full_bus_master_tx) { /* BOOMERANG bus-master */
1005 /* Calculate the next Tx descriptor entry. */
1006 int entry = vp->cur_tx % TX_RING_SIZE;
1007 struct boom_tx_desc *prev_entry;
Eric Sesterhenncb958182006-08-19 19:37:57 +02001008 unsigned long flags;
1009 int i;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001010
1011 if (vp->tx_full) /* No room to transmit with */
1012 return 1;
1013 if (vp->cur_tx != 0)
1014 prev_entry = &vp->tx_ring[(vp->cur_tx - 1) % TX_RING_SIZE];
1015 else
1016 prev_entry = NULL;
1017 if (corkscrew_debug > 3)
1018 printk("%s: Trying to send a packet, Tx index %d.\n",
1019 dev->name, vp->cur_tx);
1020 /* vp->tx_full = 1; */
1021 vp->tx_skbuff[entry] = skb;
1022 vp->tx_ring[entry].next = 0;
1023 vp->tx_ring[entry].addr = isa_virt_to_bus(skb->data);
1024 vp->tx_ring[entry].length = skb->len | 0x80000000;
1025 vp->tx_ring[entry].status = skb->len | 0x80000000;
1026
1027 spin_lock_irqsave(&vp->lock, flags);
1028 outw(DownStall, ioaddr + EL3_CMD);
1029 /* Wait for the stall to complete. */
1030 for (i = 20; i >= 0; i--)
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001031 if ((inw(ioaddr + EL3_STATUS) & CmdInProgress) == 0)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001032 break;
1033 if (prev_entry)
1034 prev_entry->next = isa_virt_to_bus(&vp->tx_ring[entry]);
1035 if (inl(ioaddr + DownListPtr) == 0) {
1036 outl(isa_virt_to_bus(&vp->tx_ring[entry]),
1037 ioaddr + DownListPtr);
1038 queued_packet++;
1039 }
1040 outw(DownUnstall, ioaddr + EL3_CMD);
1041 spin_unlock_irqrestore(&vp->lock, flags);
1042
1043 vp->cur_tx++;
1044 if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1)
1045 vp->tx_full = 1;
1046 else { /* Clear previous interrupt enable. */
1047 if (prev_entry)
1048 prev_entry->status &= ~0x80000000;
1049 netif_wake_queue(dev);
1050 }
1051 dev->trans_start = jiffies;
1052 return 0;
1053 }
1054 /* Put out the doubleword header... */
1055 outl(skb->len, ioaddr + TX_FIFO);
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001056 dev->stats.tx_bytes += skb->len;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001057#ifdef VORTEX_BUS_MASTER
1058 if (vp->bus_master) {
1059 /* Set the bus-master controller to transfer the packet. */
1060 outl((int) (skb->data), ioaddr + Wn7_MasterAddr);
1061 outw((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
1062 vp->tx_skb = skb;
1063 outw(StartDMADown, ioaddr + EL3_CMD);
1064 /* queue will be woken at the DMADone interrupt. */
1065 } else {
1066 /* ... and the packet rounded to a doubleword. */
1067 outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
1068 dev_kfree_skb(skb);
1069 if (inw(ioaddr + TxFree) > 1536) {
1070 netif_wake_queue(dev);
1071 } else
1072 /* Interrupt us when the FIFO has room for max-sized packet. */
1073 outw(SetTxThreshold + (1536 >> 2),
1074 ioaddr + EL3_CMD);
1075 }
1076#else
1077 /* ... and the packet rounded to a doubleword. */
1078 outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
1079 dev_kfree_skb(skb);
1080 if (inw(ioaddr + TxFree) > 1536) {
1081 netif_wake_queue(dev);
1082 } else
1083 /* Interrupt us when the FIFO has room for max-sized packet. */
1084 outw(SetTxThreshold + (1536 >> 2), ioaddr + EL3_CMD);
1085#endif /* bus master */
1086
1087 dev->trans_start = jiffies;
1088
1089 /* Clear the Tx status stack. */
1090 {
1091 short tx_status;
1092 int i = 4;
1093
1094 while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) {
1095 if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */
1096 if (corkscrew_debug > 2)
1097 printk("%s: Tx error, status %2.2x.\n",
1098 dev->name, tx_status);
1099 if (tx_status & 0x04)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001100 dev->stats.tx_fifo_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001101 if (tx_status & 0x38)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001102 dev->stats.tx_aborted_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001103 if (tx_status & 0x30) {
1104 int j;
1105 outw(TxReset, ioaddr + EL3_CMD);
1106 for (j = 20; j >= 0; j--)
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001107 if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001108 break;
1109 }
1110 outw(TxEnable, ioaddr + EL3_CMD);
1111 }
1112 outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */
1113 }
1114 }
1115 return 0;
1116}
1117
1118/* The interrupt handler does all of the Rx thread work and cleans up
1119 after the Tx thread. */
1120
David Howells7d12e782006-10-05 14:55:46 +01001121static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -07001122{
1123 /* Use the now-standard shared IRQ implementation. */
1124 struct net_device *dev = dev_id;
1125 struct corkscrew_private *lp = netdev_priv(dev);
1126 int ioaddr, status;
1127 int latency;
1128 int i = max_interrupt_work;
1129
1130 ioaddr = dev->base_addr;
1131 latency = inb(ioaddr + Timer);
1132
1133 spin_lock(&lp->lock);
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001134
Linus Torvalds1da177e2005-04-16 15:20:36 -07001135 status = inw(ioaddr + EL3_STATUS);
1136
1137 if (corkscrew_debug > 4)
1138 printk("%s: interrupt, status %4.4x, timer %d.\n",
1139 dev->name, status, latency);
1140 if ((status & 0xE000) != 0xE000) {
1141 static int donedidthis;
1142 /* Some interrupt controllers store a bogus interrupt from boot-time.
1143 Ignore a single early interrupt, but don't hang the machine for
1144 other interrupt problems. */
1145 if (donedidthis++ > 100) {
1146 printk(KERN_ERR "%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
1147 dev->name, status, netif_running(dev));
1148 free_irq(dev->irq, dev);
1149 dev->irq = -1;
1150 }
1151 }
1152
1153 do {
1154 if (corkscrew_debug > 5)
1155 printk("%s: In interrupt loop, status %4.4x.\n",
1156 dev->name, status);
1157 if (status & RxComplete)
1158 corkscrew_rx(dev);
1159
1160 if (status & TxAvailable) {
1161 if (corkscrew_debug > 5)
1162 printk(" TX room bit was handled.\n");
1163 /* There's room in the FIFO for a full-sized packet. */
1164 outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
1165 netif_wake_queue(dev);
1166 }
1167 if (status & DownComplete) {
1168 unsigned int dirty_tx = lp->dirty_tx;
1169
1170 while (lp->cur_tx - dirty_tx > 0) {
1171 int entry = dirty_tx % TX_RING_SIZE;
1172 if (inl(ioaddr + DownListPtr) == isa_virt_to_bus(&lp->tx_ring[entry]))
1173 break; /* It still hasn't been processed. */
1174 if (lp->tx_skbuff[entry]) {
1175 dev_kfree_skb_irq(lp->tx_skbuff[entry]);
1176 lp->tx_skbuff[entry] = NULL;
1177 }
1178 dirty_tx++;
1179 }
1180 lp->dirty_tx = dirty_tx;
1181 outw(AckIntr | DownComplete, ioaddr + EL3_CMD);
1182 if (lp->tx_full && (lp->cur_tx - dirty_tx <= TX_RING_SIZE - 1)) {
1183 lp->tx_full = 0;
1184 netif_wake_queue(dev);
1185 }
1186 }
1187#ifdef VORTEX_BUS_MASTER
1188 if (status & DMADone) {
1189 outw(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */
1190 dev_kfree_skb_irq(lp->tx_skb); /* Release the transferred buffer */
1191 netif_wake_queue(dev);
1192 }
1193#endif
1194 if (status & UpComplete) {
1195 boomerang_rx(dev);
1196 outw(AckIntr | UpComplete, ioaddr + EL3_CMD);
1197 }
1198 if (status & (AdapterFailure | RxEarly | StatsFull)) {
1199 /* Handle all uncommon interrupts at once. */
1200 if (status & RxEarly) { /* Rx early is unused. */
1201 corkscrew_rx(dev);
1202 outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
1203 }
1204 if (status & StatsFull) { /* Empty statistics. */
1205 static int DoneDidThat;
1206 if (corkscrew_debug > 4)
1207 printk("%s: Updating stats.\n", dev->name);
1208 update_stats(ioaddr, dev);
1209 /* DEBUG HACK: Disable statistics as an interrupt source. */
1210 /* This occurs when we have the wrong media type! */
1211 if (DoneDidThat == 0 && inw(ioaddr + EL3_STATUS) & StatsFull) {
1212 int win, reg;
1213 printk("%s: Updating stats failed, disabling stats as an"
1214 " interrupt source.\n", dev->name);
1215 for (win = 0; win < 8; win++) {
1216 EL3WINDOW(win);
1217 printk("\n Vortex window %d:", win);
1218 for (reg = 0; reg < 16; reg++)
1219 printk(" %2.2x", inb(ioaddr + reg));
1220 }
1221 EL3WINDOW(7);
1222 outw(SetIntrEnb | TxAvailable |
1223 RxComplete | AdapterFailure |
1224 UpComplete | DownComplete |
1225 TxComplete, ioaddr + EL3_CMD);
1226 DoneDidThat++;
1227 }
1228 }
1229 if (status & AdapterFailure) {
1230 /* Adapter failure requires Rx reset and reinit. */
1231 outw(RxReset, ioaddr + EL3_CMD);
1232 /* Set the Rx filter to the current state. */
1233 set_rx_mode(dev);
1234 outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
1235 outw(AckIntr | AdapterFailure,
1236 ioaddr + EL3_CMD);
1237 }
1238 }
1239
1240 if (--i < 0) {
1241 printk(KERN_ERR "%s: Too much work in interrupt, status %4.4x. "
1242 "Disabling functions (%4.4x).\n", dev->name,
1243 status, SetStatusEnb | ((~status) & 0x7FE));
1244 /* Disable all pending interrupts. */
1245 outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD);
1246 outw(AckIntr | 0x7FF, ioaddr + EL3_CMD);
1247 break;
1248 }
1249 /* Acknowledge the IRQ. */
1250 outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
1251
1252 } while ((status = inw(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001253
Linus Torvalds1da177e2005-04-16 15:20:36 -07001254 spin_unlock(&lp->lock);
1255
1256 if (corkscrew_debug > 4)
1257 printk("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
1258 return IRQ_HANDLED;
1259}
1260
1261static int corkscrew_rx(struct net_device *dev)
1262{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001263 int ioaddr = dev->base_addr;
1264 int i;
1265 short rx_status;
1266
1267 if (corkscrew_debug > 5)
1268 printk(" In rx_packet(), status %4.4x, rx_status %4.4x.\n",
1269 inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
1270 while ((rx_status = inw(ioaddr + RxStatus)) > 0) {
1271 if (rx_status & 0x4000) { /* Error, update stats. */
1272 unsigned char rx_error = inb(ioaddr + RxErrors);
1273 if (corkscrew_debug > 2)
1274 printk(" Rx error: status %2.2x.\n",
1275 rx_error);
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001276 dev->stats.rx_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001277 if (rx_error & 0x01)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001278 dev->stats.rx_over_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001279 if (rx_error & 0x02)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001280 dev->stats.rx_length_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001281 if (rx_error & 0x04)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001282 dev->stats.rx_frame_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001283 if (rx_error & 0x08)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001284 dev->stats.rx_crc_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001285 if (rx_error & 0x10)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001286 dev->stats.rx_length_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001287 } else {
1288 /* The packet length: up to 4.5K!. */
1289 short pkt_len = rx_status & 0x1fff;
1290 struct sk_buff *skb;
1291
1292 skb = dev_alloc_skb(pkt_len + 5 + 2);
1293 if (corkscrew_debug > 4)
1294 printk("Receiving packet size %d status %4.4x.\n",
1295 pkt_len, rx_status);
1296 if (skb != NULL) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001297 skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
1298 /* 'skb_put()' points to the start of sk_buff data area. */
1299 insl(ioaddr + RX_FIFO,
1300 skb_put(skb, pkt_len),
1301 (pkt_len + 3) >> 2);
1302 outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
1303 skb->protocol = eth_type_trans(skb, dev);
1304 netif_rx(skb);
1305 dev->last_rx = jiffies;
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001306 dev->stats.rx_packets++;
1307 dev->stats.rx_bytes += pkt_len;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001308 /* Wait a limited time to go to next packet. */
1309 for (i = 200; i >= 0; i--)
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001310 if (! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
Linus Torvalds1da177e2005-04-16 15:20:36 -07001311 break;
1312 continue;
1313 } else if (corkscrew_debug)
1314 printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
1315 }
1316 outw(RxDiscard, ioaddr + EL3_CMD);
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001317 dev->stats.rx_dropped++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001318 /* Wait a limited time to skip this packet. */
1319 for (i = 200; i >= 0; i--)
1320 if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
1321 break;
1322 }
1323 return 0;
1324}
1325
1326static int boomerang_rx(struct net_device *dev)
1327{
1328 struct corkscrew_private *vp = netdev_priv(dev);
1329 int entry = vp->cur_rx % RX_RING_SIZE;
1330 int ioaddr = dev->base_addr;
1331 int rx_status;
1332
1333 if (corkscrew_debug > 5)
1334 printk(" In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
1335 inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
1336 while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) {
1337 if (rx_status & RxDError) { /* Error, update stats. */
1338 unsigned char rx_error = rx_status >> 16;
1339 if (corkscrew_debug > 2)
1340 printk(" Rx error: status %2.2x.\n",
1341 rx_error);
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001342 dev->stats.rx_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001343 if (rx_error & 0x01)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001344 dev->stats.rx_over_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001345 if (rx_error & 0x02)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001346 dev->stats.rx_length_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001347 if (rx_error & 0x04)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001348 dev->stats.rx_frame_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001349 if (rx_error & 0x08)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001350 dev->stats.rx_crc_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001351 if (rx_error & 0x10)
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001352 dev->stats.rx_length_errors++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001353 } else {
1354 /* The packet length: up to 4.5K!. */
1355 short pkt_len = rx_status & 0x1fff;
1356 struct sk_buff *skb;
1357
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001358 dev->stats.rx_bytes += pkt_len;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001359 if (corkscrew_debug > 4)
1360 printk("Receiving packet size %d status %4.4x.\n",
1361 pkt_len, rx_status);
1362
1363 /* Check if the packet is long enough to just accept without
1364 copying to a properly sized skbuff. */
1365 if (pkt_len < rx_copybreak
Al Viro79ea13c2008-01-24 02:06:46 -08001366 && (skb = dev_alloc_skb(pkt_len + 4)) != NULL) {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001367 skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
1368 /* 'skb_put()' points to the start of sk_buff data area. */
1369 memcpy(skb_put(skb, pkt_len),
1370 isa_bus_to_virt(vp->rx_ring[entry].
1371 addr), pkt_len);
1372 rx_copy++;
1373 } else {
1374 void *temp;
1375 /* Pass up the skbuff already on the Rx ring. */
1376 skb = vp->rx_skbuff[entry];
1377 vp->rx_skbuff[entry] = NULL;
1378 temp = skb_put(skb, pkt_len);
1379 /* Remove this checking code for final release. */
1380 if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp)
1381 printk("%s: Warning -- the skbuff addresses do not match"
1382 " in boomerang_rx: %p vs. %p / %p.\n",
1383 dev->name,
1384 isa_bus_to_virt(vp->
1385 rx_ring[entry].
1386 addr), skb->head,
1387 temp);
1388 rx_nocopy++;
1389 }
1390 skb->protocol = eth_type_trans(skb, dev);
1391 netif_rx(skb);
1392 dev->last_rx = jiffies;
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001393 dev->stats.rx_packets++;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001394 }
1395 entry = (++vp->cur_rx) % RX_RING_SIZE;
1396 }
1397 /* Refill the Rx ring buffers. */
1398 for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) {
1399 struct sk_buff *skb;
1400 entry = vp->dirty_rx % RX_RING_SIZE;
1401 if (vp->rx_skbuff[entry] == NULL) {
1402 skb = dev_alloc_skb(PKT_BUF_SZ);
1403 if (skb == NULL)
1404 break; /* Bad news! */
1405 skb->dev = dev; /* Mark as being used by this device. */
1406 skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
David S. Miller689be432005-06-28 15:25:31 -07001407 vp->rx_ring[entry].addr = isa_virt_to_bus(skb->data);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001408 vp->rx_skbuff[entry] = skb;
1409 }
1410 vp->rx_ring[entry].status = 0; /* Clear complete bit. */
1411 }
1412 return 0;
1413}
1414
1415static int corkscrew_close(struct net_device *dev)
1416{
1417 struct corkscrew_private *vp = netdev_priv(dev);
1418 int ioaddr = dev->base_addr;
1419 int i;
1420
1421 netif_stop_queue(dev);
1422
1423 if (corkscrew_debug > 1) {
1424 printk("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
1425 dev->name, inw(ioaddr + EL3_STATUS),
1426 inb(ioaddr + TxStatus));
1427 printk("%s: corkscrew close stats: rx_nocopy %d rx_copy %d"
1428 " tx_queued %d.\n", dev->name, rx_nocopy, rx_copy,
1429 queued_packet);
1430 }
1431
1432 del_timer(&vp->timer);
1433
1434 /* Turn off statistics ASAP. We update lp->stats below. */
1435 outw(StatsDisable, ioaddr + EL3_CMD);
1436
1437 /* Disable the receiver and transmitter. */
1438 outw(RxDisable, ioaddr + EL3_CMD);
1439 outw(TxDisable, ioaddr + EL3_CMD);
1440
1441 if (dev->if_port == XCVR_10base2)
1442 /* Turn off thinnet power. Green! */
1443 outw(StopCoax, ioaddr + EL3_CMD);
1444
1445 free_irq(dev->irq, dev);
1446
1447 outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
1448
1449 update_stats(ioaddr, dev);
1450 if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */
1451 outl(0, ioaddr + UpListPtr);
1452 for (i = 0; i < RX_RING_SIZE; i++)
1453 if (vp->rx_skbuff[i]) {
1454 dev_kfree_skb(vp->rx_skbuff[i]);
1455 vp->rx_skbuff[i] = NULL;
1456 }
1457 }
1458 if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */
1459 outl(0, ioaddr + DownListPtr);
1460 for (i = 0; i < TX_RING_SIZE; i++)
1461 if (vp->tx_skbuff[i]) {
1462 dev_kfree_skb(vp->tx_skbuff[i]);
1463 vp->tx_skbuff[i] = NULL;
1464 }
1465 }
1466
1467 return 0;
1468}
1469
1470static struct net_device_stats *corkscrew_get_stats(struct net_device *dev)
1471{
1472 struct corkscrew_private *vp = netdev_priv(dev);
1473 unsigned long flags;
1474
1475 if (netif_running(dev)) {
1476 spin_lock_irqsave(&vp->lock, flags);
1477 update_stats(dev->base_addr, dev);
1478 spin_unlock_irqrestore(&vp->lock, flags);
1479 }
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001480 return &dev->stats;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001481}
1482
1483/* Update statistics.
1484 Unlike with the EL3 we need not worry about interrupts changing
1485 the window setting from underneath us, but we must still guard
1486 against a race condition with a StatsUpdate interrupt updating the
1487 table. This is done by checking that the ASM (!) code generated uses
1488 atomic updates with '+='.
1489 */
1490static void update_stats(int ioaddr, struct net_device *dev)
1491{
Linus Torvalds1da177e2005-04-16 15:20:36 -07001492 /* Unlike the 3c5x9 we need not turn off stats updates while reading. */
1493 /* Switch to the stats window, and read everything. */
1494 EL3WINDOW(6);
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001495 dev->stats.tx_carrier_errors += inb(ioaddr + 0);
1496 dev->stats.tx_heartbeat_errors += inb(ioaddr + 1);
Linus Torvalds1da177e2005-04-16 15:20:36 -07001497 /* Multiple collisions. */ inb(ioaddr + 2);
Paulius Zaleckasdfd44152008-04-29 03:07:31 +03001498 dev->stats.collisions += inb(ioaddr + 3);
1499 dev->stats.tx_window_errors += inb(ioaddr + 4);
1500 dev->stats.rx_fifo_errors += inb(ioaddr + 5);
1501 dev->stats.tx_packets += inb(ioaddr + 6);
1502 dev->stats.tx_packets += (inb(ioaddr + 9) & 0x30) << 4;
Linus Torvalds1da177e2005-04-16 15:20:36 -07001503 /* Rx packets */ inb(ioaddr + 7);
1504 /* Must read to clear */
1505 /* Tx deferrals */ inb(ioaddr + 8);
1506 /* Don't bother with register 9, an extension of registers 6&7.
1507 If we do use the 6&7 values the atomic update assumption above
1508 is invalid. */
1509 inw(ioaddr + 10); /* Total Rx and Tx octets. */
1510 inw(ioaddr + 12);
1511 /* New: On the Vortex we must also clear the BadSSD counter. */
1512 EL3WINDOW(4);
1513 inb(ioaddr + 12);
1514
1515 /* We change back to window 7 (not 1) with the Vortex. */
1516 EL3WINDOW(7);
1517 return;
1518}
1519
1520/* This new version of set_rx_mode() supports v1.4 kernels.
1521 The Vortex chip has no documented multicast filter, so the only
1522 multicast setting is to receive all multicast frames. At least
1523 the chip has a very clean way to set the mode, unlike many others. */
1524static void set_rx_mode(struct net_device *dev)
1525{
1526 int ioaddr = dev->base_addr;
1527 short new_mode;
1528
1529 if (dev->flags & IFF_PROMISC) {
1530 if (corkscrew_debug > 3)
1531 printk("%s: Setting promiscuous mode.\n",
1532 dev->name);
1533 new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm;
1534 } else if ((dev->mc_list) || (dev->flags & IFF_ALLMULTI)) {
1535 new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast;
1536 } else
1537 new_mode = SetRxFilter | RxStation | RxBroadcast;
1538
1539 outw(new_mode, ioaddr + EL3_CMD);
1540}
1541
1542static void netdev_get_drvinfo(struct net_device *dev,
1543 struct ethtool_drvinfo *info)
1544{
1545 strcpy(info->driver, DRV_NAME);
1546 strcpy(info->version, DRV_VERSION);
1547 sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
1548}
1549
1550static u32 netdev_get_msglevel(struct net_device *dev)
1551{
1552 return corkscrew_debug;
1553}
1554
1555static void netdev_set_msglevel(struct net_device *dev, u32 level)
1556{
1557 corkscrew_debug = level;
1558}
1559
Jeff Garzik7282d492006-09-13 14:30:00 -04001560static const struct ethtool_ops netdev_ethtool_ops = {
Linus Torvalds1da177e2005-04-16 15:20:36 -07001561 .get_drvinfo = netdev_get_drvinfo,
1562 .get_msglevel = netdev_get_msglevel,
1563 .set_msglevel = netdev_set_msglevel,
1564};
1565
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001566
Linus Torvalds1da177e2005-04-16 15:20:36 -07001567#ifdef MODULE
1568void cleanup_module(void)
1569{
1570 while (!list_empty(&root_corkscrew_dev)) {
1571 struct net_device *dev;
1572 struct corkscrew_private *vp;
1573
1574 vp = list_entry(root_corkscrew_dev.next,
1575 struct corkscrew_private, list);
1576 dev = vp->our_dev;
1577 unregister_netdev(dev);
1578 cleanup_card(dev);
1579 free_netdev(dev);
1580 }
1581}
1582#endif /* MODULE */
Jeff Garzik6aa20a22006-09-13 13:24:59 -04001583
Linus Torvalds1da177e2005-04-16 15:20:36 -07001584/*
1585 * Local variables:
1586 * compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c 3c515.c"
1587 * c-indent-level: 4
1588 * tab-width: 4
1589 * End:
1590 */