blob: 3d6f4cc3998af9a97c3d1ba65977466f8728414d [file] [log] [blame]
Alexander Duyckd4e0fe02009-04-07 14:37:34 +00001/*******************************************************************************
2
3 Intel(R) 82576 Virtual Function Linux driver
Greg Rose2c20ebb2010-11-16 19:41:35 -08004 Copyright(c) 2009 - 2010 Intel Corporation.
Alexander Duyckd4e0fe02009-04-07 14:37:34 +00005
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
9
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 more details.
14
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
21
22 Contact Information:
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25
26*******************************************************************************/
27
28#include "mbx.h"
29
30/**
31 * e1000_poll_for_msg - Wait for message notification
32 * @hw: pointer to the HW structure
33 *
34 * returns SUCCESS if it successfully received a message notification
35 **/
36static s32 e1000_poll_for_msg(struct e1000_hw *hw)
37{
38 struct e1000_mbx_info *mbx = &hw->mbx;
39 int countdown = mbx->timeout;
40
41 if (!mbx->ops.check_for_msg)
42 goto out;
43
44 while (countdown && mbx->ops.check_for_msg(hw)) {
45 countdown--;
46 udelay(mbx->usec_delay);
47 }
48
49 /* if we failed, all future posted messages fail until reset */
50 if (!countdown)
51 mbx->timeout = 0;
52out:
53 return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
54}
55
56/**
57 * e1000_poll_for_ack - Wait for message acknowledgement
58 * @hw: pointer to the HW structure
59 *
60 * returns SUCCESS if it successfully received a message acknowledgement
61 **/
62static s32 e1000_poll_for_ack(struct e1000_hw *hw)
63{
64 struct e1000_mbx_info *mbx = &hw->mbx;
65 int countdown = mbx->timeout;
66
67 if (!mbx->ops.check_for_ack)
68 goto out;
69
70 while (countdown && mbx->ops.check_for_ack(hw)) {
71 countdown--;
72 udelay(mbx->usec_delay);
73 }
74
75 /* if we failed, all future posted messages fail until reset */
76 if (!countdown)
77 mbx->timeout = 0;
78out:
79 return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
80}
81
82/**
83 * e1000_read_posted_mbx - Wait for message notification and receive message
84 * @hw: pointer to the HW structure
85 * @msg: The message buffer
86 * @size: Length of buffer
87 *
88 * returns SUCCESS if it successfully received a message notification and
89 * copied it into the receive buffer.
90 **/
91static s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
92{
93 struct e1000_mbx_info *mbx = &hw->mbx;
94 s32 ret_val = -E1000_ERR_MBX;
95
96 if (!mbx->ops.read)
97 goto out;
98
99 ret_val = e1000_poll_for_msg(hw);
100
101 /* if ack received read message, otherwise we timed out */
102 if (!ret_val)
103 ret_val = mbx->ops.read(hw, msg, size);
104out:
105 return ret_val;
106}
107
108/**
109 * e1000_write_posted_mbx - Write a message to the mailbox, wait for ack
110 * @hw: pointer to the HW structure
111 * @msg: The message buffer
112 * @size: Length of buffer
113 *
114 * returns SUCCESS if it successfully copied message into the buffer and
115 * received an ack to that message within delay * timeout period
116 **/
117static s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
118{
119 struct e1000_mbx_info *mbx = &hw->mbx;
120 s32 ret_val = -E1000_ERR_MBX;
121
122 /* exit if we either can't write or there isn't a defined timeout */
123 if (!mbx->ops.write || !mbx->timeout)
124 goto out;
125
126 /* send msg*/
127 ret_val = mbx->ops.write(hw, msg, size);
128
129 /* if msg sent wait until we receive an ack */
130 if (!ret_val)
131 ret_val = e1000_poll_for_ack(hw);
132out:
133 return ret_val;
134}
135
136/**
137 * e1000_read_v2p_mailbox - read v2p mailbox
138 * @hw: pointer to the HW structure
139 *
140 * This function is used to read the v2p mailbox without losing the read to
141 * clear status bits.
142 **/
143static u32 e1000_read_v2p_mailbox(struct e1000_hw *hw)
144{
145 u32 v2p_mailbox = er32(V2PMAILBOX(0));
146
147 v2p_mailbox |= hw->dev_spec.vf.v2p_mailbox;
148 hw->dev_spec.vf.v2p_mailbox |= v2p_mailbox & E1000_V2PMAILBOX_R2C_BITS;
149
150 return v2p_mailbox;
151}
152
153/**
154 * e1000_check_for_bit_vf - Determine if a status bit was set
155 * @hw: pointer to the HW structure
156 * @mask: bitmask for bits to be tested and cleared
157 *
158 * This function is used to check for the read to clear bits within
159 * the V2P mailbox.
160 **/
161static s32 e1000_check_for_bit_vf(struct e1000_hw *hw, u32 mask)
162{
163 u32 v2p_mailbox = e1000_read_v2p_mailbox(hw);
164 s32 ret_val = -E1000_ERR_MBX;
165
166 if (v2p_mailbox & mask)
167 ret_val = E1000_SUCCESS;
168
169 hw->dev_spec.vf.v2p_mailbox &= ~mask;
170
171 return ret_val;
172}
173
174/**
175 * e1000_check_for_msg_vf - checks to see if the PF has sent mail
176 * @hw: pointer to the HW structure
177 *
178 * returns SUCCESS if the PF has set the Status bit or else ERR_MBX
179 **/
180static s32 e1000_check_for_msg_vf(struct e1000_hw *hw)
181{
182 s32 ret_val = -E1000_ERR_MBX;
183
184 if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFSTS)) {
185 ret_val = E1000_SUCCESS;
186 hw->mbx.stats.reqs++;
187 }
188
189 return ret_val;
190}
191
192/**
193 * e1000_check_for_ack_vf - checks to see if the PF has ACK'd
194 * @hw: pointer to the HW structure
195 *
196 * returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
197 **/
198static s32 e1000_check_for_ack_vf(struct e1000_hw *hw)
199{
200 s32 ret_val = -E1000_ERR_MBX;
201
202 if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFACK)) {
203 ret_val = E1000_SUCCESS;
204 hw->mbx.stats.acks++;
205 }
206
207 return ret_val;
208}
209
210/**
211 * e1000_check_for_rst_vf - checks to see if the PF has reset
212 * @hw: pointer to the HW structure
213 *
214 * returns true if the PF has set the reset done bit or else false
215 **/
216static s32 e1000_check_for_rst_vf(struct e1000_hw *hw)
217{
218 s32 ret_val = -E1000_ERR_MBX;
219
220 if (!e1000_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD |
221 E1000_V2PMAILBOX_RSTI))) {
222 ret_val = E1000_SUCCESS;
223 hw->mbx.stats.rsts++;
224 }
225
226 return ret_val;
227}
228
229/**
230 * e1000_obtain_mbx_lock_vf - obtain mailbox lock
231 * @hw: pointer to the HW structure
232 *
233 * return SUCCESS if we obtained the mailbox lock
234 **/
235static s32 e1000_obtain_mbx_lock_vf(struct e1000_hw *hw)
236{
237 s32 ret_val = -E1000_ERR_MBX;
238
239 /* Take ownership of the buffer */
240 ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_VFU);
241
242 /* reserve mailbox for vf use */
243 if (e1000_read_v2p_mailbox(hw) & E1000_V2PMAILBOX_VFU)
244 ret_val = E1000_SUCCESS;
245
246 return ret_val;
247}
248
249/**
250 * e1000_write_mbx_vf - Write a message to the mailbox
251 * @hw: pointer to the HW structure
252 * @msg: The message buffer
253 * @size: Length of buffer
254 *
255 * returns SUCCESS if it successfully copied message into the buffer
256 **/
257static s32 e1000_write_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
258{
259 s32 err;
260 u16 i;
261
262 /* lock the mailbox to prevent pf/vf race condition */
263 err = e1000_obtain_mbx_lock_vf(hw);
264 if (err)
265 goto out_no_write;
266
267 /* flush any ack or msg as we are going to overwrite mailbox */
268 e1000_check_for_ack_vf(hw);
269 e1000_check_for_msg_vf(hw);
270
271 /* copy the caller specified message to the mailbox memory buffer */
272 for (i = 0; i < size; i++)
273 array_ew32(VMBMEM(0), i, msg[i]);
274
275 /* update stats */
276 hw->mbx.stats.msgs_tx++;
277
278 /* Drop VFU and interrupt the PF to tell it a message has been sent */
279 ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_REQ);
280
281out_no_write:
282 return err;
283}
284
285/**
286 * e1000_read_mbx_vf - Reads a message from the inbox intended for vf
287 * @hw: pointer to the HW structure
288 * @msg: The message buffer
289 * @size: Length of buffer
290 *
291 * returns SUCCESS if it successfuly read message from buffer
292 **/
293static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
294{
295 s32 err;
296 u16 i;
297
298 /* lock the mailbox to prevent pf/vf race condition */
299 err = e1000_obtain_mbx_lock_vf(hw);
300 if (err)
301 goto out_no_read;
302
303 /* copy the message from the mailbox memory buffer */
304 for (i = 0; i < size; i++)
305 msg[i] = array_er32(VMBMEM(0), i);
306
307 /* Acknowledge receipt and release mailbox, then we're done */
308 ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_ACK);
309
310 /* update stats */
311 hw->mbx.stats.msgs_rx++;
312
313out_no_read:
314 return err;
315}
316
317/**
318 * e1000_init_mbx_params_vf - set initial values for vf mailbox
319 * @hw: pointer to the HW structure
320 *
321 * Initializes the hw->mbx struct to correct values for vf mailbox
322 */
323s32 e1000_init_mbx_params_vf(struct e1000_hw *hw)
324{
325 struct e1000_mbx_info *mbx = &hw->mbx;
326
327 /* start mailbox as timed out and let the reset_hw call set the timeout
328 * value to being communications */
329 mbx->timeout = 0;
330 mbx->usec_delay = E1000_VF_MBX_INIT_DELAY;
331
332 mbx->size = E1000_VFMAILBOX_SIZE;
333
334 mbx->ops.read = e1000_read_mbx_vf;
335 mbx->ops.write = e1000_write_mbx_vf;
336 mbx->ops.read_posted = e1000_read_posted_mbx;
337 mbx->ops.write_posted = e1000_write_posted_mbx;
338 mbx->ops.check_for_msg = e1000_check_for_msg_vf;
339 mbx->ops.check_for_ack = e1000_check_for_ack_vf;
340 mbx->ops.check_for_rst = e1000_check_for_rst_vf;
341
342 mbx->stats.msgs_tx = 0;
343 mbx->stats.msgs_rx = 0;
344 mbx->stats.reqs = 0;
345 mbx->stats.acks = 0;
346 mbx->stats.rsts = 0;
347
348 return E1000_SUCCESS;
349}
350