| Stefan Roese | 667b504 | 2012-12-05 23:30:10 +0000 | [diff] [blame] | 1 | /* |
| 2 | * a3m071 board Device Tree Source |
| 3 | * |
| 4 | * Copyright 2012 Stefan Roese <sr@denx.de> |
| 5 | * |
| 6 | * Copyright (C) 2011 DENX Software Engineering GmbH |
| 7 | * Heiko Schocher <hs@denx.de> |
| 8 | * |
| 9 | * Copyright (C) 2007 Semihalf |
| 10 | * Marian Balakowicz <m8@semihalf.com> |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or modify it |
| 13 | * under the terms of the GNU General Public License as published by the |
| 14 | * Free Software Foundation; either version 2 of the License, or (at your |
| 15 | * option) any later version. |
| 16 | */ |
| 17 | |
| 18 | /include/ "mpc5200b.dtsi" |
| 19 | |
| Grant Likely | fa59f17 | 2013-02-08 08:02:51 +0000 | [diff] [blame] | 20 | &gpt0 { fsl,has-wdt; }; |
| 21 | |
| Stefan Roese | 667b504 | 2012-12-05 23:30:10 +0000 | [diff] [blame] | 22 | / { |
| 23 | model = "anonymous,a3m071"; |
| 24 | compatible = "anonymous,a3m071"; |
| 25 | |
| 26 | soc5200@f0000000 { |
| 27 | #address-cells = <1>; |
| 28 | #size-cells = <1>; |
| 29 | compatible = "fsl,mpc5200b-immr"; |
| 30 | ranges = <0 0xf0000000 0x0000c000>; |
| 31 | reg = <0xf0000000 0x00000100>; |
| 32 | bus-frequency = <0>; /* From boot loader */ |
| 33 | system-frequency = <0>; /* From boot loader */ |
| 34 | |
| Stefan Roese | 667b504 | 2012-12-05 23:30:10 +0000 | [diff] [blame] | 35 | spi@f00 { |
| 36 | status = "disabled"; |
| 37 | }; |
| 38 | |
| 39 | usb: usb@1000 { |
| 40 | status = "disabled"; |
| 41 | }; |
| 42 | |
| 43 | psc@2000 { |
| 44 | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| 45 | reg = <0x2000 0x100>; |
| 46 | interrupts = <2 1 0>; |
| 47 | }; |
| 48 | |
| 49 | psc@2200 { |
| 50 | status = "disabled"; |
| 51 | }; |
| 52 | |
| 53 | psc@2400 { |
| 54 | status = "disabled"; |
| 55 | }; |
| 56 | |
| 57 | psc@2600 { |
| 58 | status = "disabled"; |
| 59 | }; |
| 60 | |
| 61 | psc@2800 { |
| 62 | status = "disabled"; |
| 63 | }; |
| 64 | |
| 65 | psc@2c00 { // PSC6 |
| 66 | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| 67 | reg = <0x2c00 0x100>; |
| 68 | interrupts = <2 4 0>; |
| 69 | }; |
| 70 | |
| 71 | ethernet@3000 { |
| 72 | phy-handle = <&phy0>; |
| 73 | }; |
| 74 | |
| 75 | mdio@3000 { |
| 76 | phy0: ethernet-phy@3 { |
| 77 | reg = <0x03>; |
| 78 | }; |
| 79 | }; |
| 80 | |
| 81 | ata@3a00 { |
| 82 | status = "disabled"; |
| 83 | }; |
| 84 | |
| 85 | i2c@3d00 { |
| 86 | status = "disabled"; |
| 87 | }; |
| 88 | |
| 89 | i2c@3d40 { |
| 90 | status = "disabled"; |
| 91 | }; |
| 92 | }; |
| 93 | |
| 94 | localbus { |
| 95 | compatible = "fsl,mpc5200b-lpb","simple-bus"; |
| 96 | #address-cells = <2>; |
| 97 | #size-cells = <1>; |
| 98 | ranges = <0 0 0xfc000000 0x02000000 |
| 99 | 3 0 0xe9000000 0x00080000 |
| 100 | 5 0 0xe8000000 0x00010000>; |
| 101 | |
| 102 | flash@0,0 { |
| 103 | #address-cells = <1>; |
| 104 | #size-cells = <1>; |
| 105 | reg = <0 0x0 0x02000000>; |
| 106 | compatible = "cfi-flash"; |
| 107 | bank-width = <2>; |
| 108 | partition@0x0 { |
| 109 | label = "u-boot"; |
| 110 | reg = <0x00000000 0x00040000>; |
| 111 | read-only; |
| 112 | }; |
| 113 | partition@0x00040000 { |
| 114 | label = "env"; |
| 115 | reg = <0x00040000 0x00020000>; |
| 116 | }; |
| 117 | partition@0x00060000 { |
| 118 | label = "dtb"; |
| 119 | reg = <0x00060000 0x00020000>; |
| 120 | }; |
| 121 | partition@0x00080000 { |
| 122 | label = "kernel"; |
| 123 | reg = <0x00080000 0x00500000>; |
| 124 | }; |
| 125 | partition@0x00580000 { |
| 126 | label = "root"; |
| 127 | reg = <0x00580000 0x00A80000>; |
| 128 | }; |
| 129 | }; |
| 130 | |
| 131 | fpga@3,0 { |
| 132 | compatible = "anonymous,a3m071-fpga"; |
| 133 | reg = <3 0x0 0x00080000 |
| 134 | 5 0x0 0x00010000>; |
| 135 | interrupts = <0 0 3>; /* level low */ |
| 136 | }; |
| 137 | }; |
| 138 | |
| 139 | pci@f0000d00 { |
| 140 | status = "disabled"; |
| 141 | }; |
| 142 | }; |