blob: 38e9e7cadc9029ecdd1df470746fd0b41cc734c2 [file] [log] [blame]
Sumant Patrocd96d962007-01-05 07:10:09 -08001Release Date : Thu Nov 16 15:32:35 EST 2006 -
2 Sumant Patro <sumant.patro@lsi.com>
3Current Version : 2.20.5.1 (scsi module), 2.20.2.6 (cmm module)
4Older Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module)
5
61. Changes in Initialization to fix kdump failure.
7 Send SYNC command on loading.
8 This command clears the pending commands in the adapter
9 and re-initialize its internal RAID structure.
10 Without this change, megaraid driver either panics or fails to
11 initialize the adapter during kdump's second kernel boot
12 if there are pending commands or interrupts from other devices
13 sharing the same IRQ.
142. Authors email-id domain name changed from lsil.com to lsi.com.
15 Also modified the MODULE_AUTHOR to megaraidlinux@lsi.com
16
Ju, Seokmannfbf60802006-07-25 08:44:48 -060017Release Date : Fri May 19 09:31:45 EST 2006 - Seokmann Ju <sju@lsil.com>
18Current Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module)
19Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
20
211. Fixed a bug in megaraid_init_mbox().
22 Customer reported "garbage in file on x86_64 platform".
23 Root Cause: the driver registered controllers as 64-bit DMA capable
24 for those which are not support it.
25 Fix: Made change in the function inserting identification machanism
26 identifying 64-bit DMA capable controllers.
27
28 > -----Original Message-----
29 > From: Vasily Averin [mailto:vvs@sw.ru]
30 > Sent: Thursday, May 04, 2006 2:49 PM
31 > To: linux-scsi@vger.kernel.org; Kolli, Neela; Mukker, Atul;
32 > Ju, Seokmann; Bagalkote, Sreenivas;
33 > James.Bottomley@SteelEye.com; devel@openvz.org
34 > Subject: megaraid_mbox: garbage in file
35 >
36 > Hello all,
37 >
38 > I've investigated customers claim on the unstable work of
39 > their node and found a
40 > strange effect: reading from some files leads to the
41 > "attempt to access beyond end of device" messages.
42 >
43 > I've checked filesystem, memory on the node, motherboard BIOS
44 > version, but it
45 > does not help and issue still has been reproduced by simple
46 > file reading.
47 >
48 > Reproducer is simple:
49 >
50 > echo 0xffffffff >/proc/sys/dev/scsi/logging_level ;
51 > cat /vz/private/101/root/etc/ld.so.cache >/tmp/ttt ;
52 > echo 0 >/proc/sys/dev/scsi/logging
53 >
54 > It leads to the following messages in dmesg
55 >
56 > sd_init_command: disk=sda, block=871769260, count=26
57 > sda : block=871769260
58 > sda : reading 26/26 512 byte blocks.
59 > scsi_add_timer: scmd: f79ed980, time: 7500, (c02b1420)
60 > sd 0:1:0:0: send 0xf79ed980 sd 0:1:0:0:
61 > command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00
62 > buffer = 0xf7cfb540, bufflen = 13312, done = 0xc0366b40,
63 > queuecommand 0xc0344010
64 > leaving scsi_dispatch_cmnd()
65 > scsi_delete_timer: scmd: f79ed980, rtn: 1
66 > sd 0:1:0:0: done 0xf79ed980 SUCCESS 0 sd 0:1:0:0:
67 > command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00
68 > scsi host busy 1 failed 0
69 > sd 0:1:0:0: Notifying upper driver of completion (result 0)
70 > sd_rw_intr: sda: res=0x0
71 > 26 sectors total, 13312 bytes done.
72 > use_sg is 4
73 > attempt to access beyond end of device
74 > sda6: rw=0, want=1044134458, limit=951401367
75 > Buffer I/O error on device sda6, logical block 522067228
76 > attempt to access beyond end of device
77
Ju, Seokmannaa677bc2006-07-25 08:44:58 -0600782. When INQUIRY with EVPD bit set issued to the MegaRAID controller,
79 system memory gets corrupted.
80 Root Cause: MegaRAID F/W handle the INQUIRY with EVPD bit set
81 incorrectly.
82 Fix: MegaRAID F/W has fixed the problem and being process of release,
83 soon. Meanwhile, driver will filter out the request.
84
Ju, Seokmann0b4972d2006-07-25 08:45:06 -0600853. One of member in the data structure of the driver leads unaligne
86 issue on 64-bit platform.
87 Customer reporeted "kernel unaligned access addrss" issue when
88 application communicates with MegaRAID HBA driver.
89 Root Cause: in uioc_t structure, one of member had misaligned and it
90 led system to display the error message.
91 Fix: A patch submitted to community from following folk.
92
93 > -----Original Message-----
94 > From: linux-scsi-owner@vger.kernel.org
95 > [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Sakurai Hiroomi
96 > Sent: Wednesday, July 12, 2006 4:20 AM
97 > To: linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org
98 > Subject: Re: Help: strange messages from kernel on IA64 platform
99 >
100 > Hi,
101 >
102 > I saw same message.
103 >
104 > When GAM(Global Array Manager) is started, The following
105 > message output.
106 > kernel: kernel unaligned access to 0xe0000001fe1080d4,
107 > ip=0xa000000200053371
108 >
109 > The uioc structure used by ioctl is defined by packed,
110 > the allignment of each member are disturbed.
111 > In a 64 bit structure, the allignment of member doesn't fit 64 bit
112 > boundary. this causes this messages.
113 > In a 32 bit structure, we don't see the message because the allinment
114 > of member fit 32 bit boundary even if packed is specified.
115 >
116 > patch
117 > I Add 32 bit dummy member to fit 64 bit boundary. I tested.
118 > We confirmed this patch fix the problem by IA64 server.
119 >
120 > **************************************************************
121 > ****************
122 > --- linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h.orig
123 > 2006-04-03 17:13:03.000000000 +0900
124 > +++ linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h
125 > 2006-04-03 17:14:09.000000000 +0900
126 > @@ -132,6 +132,10 @@
127 > /* Driver Data: */
128 > void __user * user_data;
129 > uint32_t user_data_len;
130 > +
131 > + /* 64bit alignment */
132 > + uint32_t pad_0xBC;
133 > +
134 > mraid_passthru_t __user *user_pthru;
135 >
136 > mraid_passthru_t *pthru32;
137 > **************************************************************
138 > ****************
139
Ju, Seokmannc005fb42006-04-27 02:33:06 -0700140Release Date : Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju <sju@lsil.com>
141Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
142Older Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
143
1441. Fixed a bug in megaraid_reset_handler().
145 Customer reported "Unable to handle kernel NULL pointer dereference
146 at virtual address 00000000" when system goes to reset condition
147 for some reason. It happened randomly.
148 Root Cause: in the megaraid_reset_handler(), there is possibility not
149 returning pending packets in the pend_list if there are multiple
150 pending packets.
151 Fix: Made the change in the driver so that it will return all packets
152 in the pend_list.
153
1542. Added change request.
155 As found in the following URL, rmb() only didn't help the
156 problem. I had to increase the loop counter to 0xFFFFFF. (6 F's)
157 http://marc.theaimsgroup.com/?l=linux-scsi&m=110971060502497&w=2
158
159 I attached a patch for your reference, too.
160 Could you check and get this fix in your driver?
161
162 Best Regards,
163 Jun'ichi Nomura
164
Ju, Seokmanned7e8ef2005-11-17 13:17:25 -0500165Release Date : Fri Nov 11 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
166Current Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
167Older Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
168
1691. Sorted out PCI IDs to remove megaraid support overlaps.
170 Based on the patch from Daniel, sorted out PCI IDs along with
171 charactor node name change from 'megadev' to 'megadev_legacy' to avoid
172 conflict.
173 ---
174 Hopefully we'll be getting the build restriction zapped much sooner,
175 but we should also be thinking about totally removing the hardware
176 support overlap in the megaraid drivers.
177
178 This patch pencils in a date of Feb 06 for this, and performs some
179 printk abuse in hope that existing legacy users might pick up on what's
180 going on.
181
182 Signed-off-by: Daniel Drake <dsd@gentoo.org>
183 ---
184
1852. Fixed a issue: megaraid always fails to reset handler.
186 ---
187 I found that the megaraid driver always fails to reset the
188 adapter with the following message:
189 megaraid: resetting the host...
190 megaraid mbox: reset sequence completed successfully
191 megaraid: fast sync command timed out
192 megaraid: reservation reset failed
193 when the "Cluster mode" of the adapter BIOS is enabled.
194 So, whenever the reset occurs, the adapter goes to
195 offline and just become unavailable.
196
197 Jun'ichi Nomura [mailto:jnomura@mtc.biglobe.ne.jp]
198 ---
199
Ju, Seokmann 672b2d32005-05-16 18:32:17 -0400200Release Date : Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
201Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
202Older Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
203
2041. Added IOCTL backward compatibility.
205 Convert megaraid_mm driver to new compat_ioctl entry points.
206 I don't have easy access to hardware, so only compile tested.
207 - Signed-off-by:Andi Kleen <ak@muc.de>
208
2092. megaraid_mbox fix: wrong order of arguments in memset()
210 That, BTW, shows why cross-builds are useful-the only indication of
211 problem had been a new warning showing up in sparse output on alpha
212 build (number of exceeding 256 got truncated).
213 - Signed-off-by: Al Viro
214 <viro@parcelfarce.linux.theplanet.co.uk>
215
2163. Convert pci_module_init to pci_register_driver
217 Convert from pci_module_init to pci_register_driver
218 (from:http://kerneljanitors.org/TODO)
219 - Signed-off-by: Domen Puncer <domen@coderock.org>
220
2214. Use the pre defined DMA mask constants from dma-mapping.h
222 Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling
223 pci_set_dma_mask() or pci_set_consistend_dma_mask(). See
224 http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for more
225 details.
226 Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
227 Signed-off-by: Domen Puncer <domen@coderock.org>
228
2295. Remove SSID checking for Dobson, Lindsay, and Verde based products.
230 Checking the SSVID/SSID for controllers which have Dobson, Lindsay,
231 and Verde is unnecessary because device ID has been assigned by LSI
232 and it is unique value. So, all controllers with these IOPs have to be
233 supported by the driver regardless SSVID/SSID.
234
2356. Date Thu, 27 Jan 2005 04:31:09 +0100
236 From Herbert Poetzl <>
237 Subject RFC: assert_spin_locked() for 2.6
238
239 Greetings!
240
241 overcautious programming will kill your kernel ;)
242 ever thought about checking a spin_lock or even
243 asserting that it must be held (maybe just for
244 spinlock debugging?) ...
245
246 there are several checks present in the kernel
247 where somebody does a variation on the following:
248
249 BUG_ON(!spin_is_locked(&some_lock));
250
251 so what's wrong about that? nothing, unless you
252 compile the code with CONFIG_DEBUG_SPINLOCK but
253 without CONFIG_SMP ... in which case the BUG()
254 will kill your kernel ...
255
256 maybe it's not advised to make such assertions,
257 but here is a solution which works for me ...
258 (compile tested for sh, x86_64 and x86, boot/run
259 tested for x86 only)
260
261 best,
262 Herbert
263
264 - Herbert Poetzl <herbert@13thfloor.at>, Thu, 27 Jan 2005
265
Linus Torvalds1da177e2005-04-16 15:20:36 -0700266Release Date : Thu Feb 03 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
267Current Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
268Older Version : 2.20.4.4 (scsi module), 2.20.2.4 (cmm module)
269
2701. Modified name of two attributes in scsi_host_template.
271 On Wed, 2005-02-02 at 10:56 -0500, Ju, Seokmann wrote:
272 > + .sdev_attrs = megaraid_device_attrs,
273 > + .shost_attrs = megaraid_class_device_attrs,
274
275 These are, perhaps, slightly confusing names.
276 The terms device and class_device have well defined meanings in the
277 generic device model, neither of which is what you mean here.
278 Why not simply megaraid_sdev_attrs and megaraid_shost_attrs?
279
280 Other than this, it looks fine to me too.
281
282Release Date : Thu Jan 27 00:01:03 EST 2005 - Atul Mukker <atulm@lsil.com>
283Current Version : 2.20.4.4 (scsi module), 2.20.2.5 (cmm module)
284Older Version : 2.20.4.3 (scsi module), 2.20.2.4 (cmm module)
285
2861. Bump up the version of scsi module due to its conflict.
287
288Release Date : Thu Jan 21 00:01:03 EST 2005 - Atul Mukker <atulm@lsil.com>
289Current Version : 2.20.4.3 (scsi module), 2.20.2.5 (cmm module)
290Older Version : 2.20.4.2 (scsi module), 2.20.2.4 (cmm module)
291
2921. Remove driver ioctl for logical drive to scsi address translation and
293 replace with the sysfs attribute. To remove drives and change
294 capacity, application shall now use the device attribute to get the
295 logical drive number for a scsi device. For adding newly created
296 logical drives, class device attribute would be required to uniquely
297 identify each controller.
298 - Atul Mukker <atulm@lsil.com>
299
300 "James, I've been thinking about this a little more, and you may be on
301 to something here. Let each driver add files as such:"
302
303 - Matt Domsch <Matt_Domsch@dell.com>, 12.15.2004
304 linux-scsi mailing list
305
306
307 "Then, if you simply publish your LD number as an extra parameter of
308 the device, you can look through /sys to find it."
309
310 - James Bottomley <James.Bottomley@SteelEye.com>, 01.03.2005
311 linux-scsi mailing list
312
313
314 "I don't see why not ... it's your driver, you can publish whatever
315 extra information you need as scsi_device attributes; that was one of
316 the designs of the extensible attribute system."
317
318 - James Bottomley <James.Bottomley@SteelEye.com>, 01.06.2005
319 linux-scsi mailing list
320
3212. Add AMI megaraid support - Brian King <brking@charter.net>
322 PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID3,
323 PCI_VENDOR_ID_AMI, PCI_SUBSYS_ID_PERC3_DC,
324
3253. Make some code static - Adrian Bunk <bunk@stusta.de>
326 Date: Mon, 15 Nov 2004 03:14:57 +0100
327
328 The patch below makes some needlessly global code static.
329 -wait_queue_head_t wait_q;
330 +static wait_queue_head_t wait_q;
331
332 Signed-off-by: Adrian Bunk <bunk@stusta.de>
333
3344. Added NEC ROMB support - NEC MegaRAID PCI Express ROMB controller
335 PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_MEGARAID_NEC_ROMB_2E,
336 PCI_SUBSYS_ID_NEC, PCI_SUBSYS_ID_MEGARAID_NEC_ROMB_2E,
337
3385. Fixed Tape drive issue : For any Direct CDB command to physical device
339 including tape, timeout value set by driver was 10 minutes. With this
340 value, most of command will return within timeout. However, for those
341 command like ERASE or FORMAT, it takes more than an hour depends on
342 capacity of the device and the command could be terminated before it
343 completes.
344 To address this issue, the 'timeout' field in the DCDB command will
345 have NO TIMEOUT (i.e., 4) value as its timeout on DCDB command.
346
347
348
349Release Date : Thu Dec 9 19:10:23 EST 2004
350 - Sreenivas Bagalkote <sreenib@lsil.com>
351
352Current Version : 2.20.4.2 (scsi module), 2.20.2.4 (cmm module)
353Older Version : 2.20.4.1 (scsi module), 2.20.2.3 (cmm module)
354
355i. Introduced driver ioctl that returns scsi address for a given ld.
356
357 "Why can't the existing sysfs interfaces be used to do this?"
358 - Brian King (brking@us.ibm.com)
359
360 "I've looked into solving this another way, but I cannot see how
361 to get this driver-private mapping of logical drive number-> HCTL
362 without putting code something like this into the driver."
363
364 "...and by providing a mapping a function to userspace, the driver
365 is free to change its mapping algorithm in the future if necessary .."
366 - Matt Domsch (Matt_Domsch@dell.com)
367
368Release Date : Thu Dec 9 19:02:14 EST 2004 - Sreenivas Bagalkote <sreenib@lsil.com>
369
370Current Version : 2.20.4.1 (scsi module), 2.20.2.3 (cmm module)
371Older Version : 2.20.4.1 (scsi module), 2.20.2.2 (cmm module)
372
373i. Fix a bug in kioc's dma buffer deallocation
374
375Release Date : Thu Nov 4 18:24:56 EST 2004 - Sreenivas Bagalkote <sreenib@lsil.com>
376
377Current Version : 2.20.4.1 (scsi module), 2.20.2.2 (cmm module)
378Older Version : 2.20.4.0 (scsi module), 2.20.2.1 (cmm module)
379
380i. Handle IOCTL cmd timeouts more properly.
381
382ii. pci_dma_sync_{sg,single}_for_cpu was introduced into megaraid_mbox
383 incorrectly (instead of _for_device). Changed to appropriate
384 pci_dma_sync_{sg,single}_for_device.
385
386Release Date : Wed Oct 06 11:15:29 EDT 2004 - Sreenivas Bagalkote <sreenib@lsil.com>
387Current Version : 2.20.4.0 (scsi module), 2.20.2.1 (cmm module)
388Older Version : 2.20.4.0 (scsi module), 2.20.2.0 (cmm module)
389
390i. Remove CONFIG_COMPAT around register_ioctl32_conversion
391
392Release Date : Mon Sep 27 22:15:07 EDT 2004 - Atul Mukker <atulm@lsil.com>
393Current Version : 2.20.4.0 (scsi module), 2.20.2.0 (cmm module)
394Older Version : 2.20.3.1 (scsi module), 2.20.2.0 (cmm module)
395
396i. Fix data corruption. Because of a typo in the driver, the IO packets
397 were wrongly shared by the ioctl path. This causes a whole IO command
398 to be replaced by an incoming ioctl command.
399
400Release Date : Tue Aug 24 09:43:35 EDT 2004 - Atul Mukker <atulm@lsil.com>
401Current Version : 2.20.3.1 (scsi module), 2.20.2.0 (cmm module)
402Older Version : 2.20.3.0 (scsi module), 2.20.2.0 (cmm module)
403
404i. Function reordering so that inline functions are defined before they
405 are actually used. It is now mandatory for GCC 3.4.1 (current stable)
406
407 Declare some heavy-weight functions to be non-inlined,
408 megaraid_mbox_build_cmd, megaraid_mbox_runpendq,
409 megaraid_mbox_prepare_pthru, megaraid_mbox_prepare_epthru,
410 megaraid_busywait_mbox
411
Francois Camie1f8e872008-10-15 22:01:59 -0700412 - Andrew Morton, 08.19.2004
Linus Torvalds1da177e2005-04-16 15:20:36 -0700413 linux-scsi mailing list
414
415 "Something else to clean up after inclusion: every instance of an
416 inline function is actually rendered as a full function call, because
417 the function is always used before it is defined. Atul, please
418 re-arrange the code to eliminate the need for most (all) of the
419 function prototypes at the top of each file, and define (not just
420 declare with a prototype) each inline function before its first use"
421
422 - Matt Domsch <Matt_Domsch@dell.com>, 07.27.2004
423 linux-scsi mailing list
424
425
426ii. Display elapsed time (countdown) while waiting for FW to boot.
427
428iii. Module compilation reorder in Makefile so that unresolved symbols do
429 not occur when driver is compiled non-modular.
430
431 Patrick J. LoPresti <patl@users.sourceforge.net>, 8.22.2004
432 linux-scsi mailing list
433
434
435Release Date : Thu Aug 19 09:58:33 EDT 2004 - Atul Mukker <atulm@lsil.com>
436Current Version : 2.20.3.0 (scsi module), 2.20.2.0 (cmm module)
437Older Version : 2.20.2.0 (scsi module), 2.20.1.0 (cmm module)
438
439i. When copying the mailbox packets, copy only first 14 bytes (for 32-bit
440 mailboxes) and only first 22 bytes (for 64-bit mailboxes). This is to
441 avoid getting the stale values for busy bit. We want to set the busy
442 bit just before issuing command to the FW.
443
444ii. In the reset handling, if the reseted command is not owned by the
445 driver, do not (wrongly) print information for the "attached" driver
446 packet.
447
448iii. Have extended wait when issuing command in synchronous mode. This is
449 required for the cases where the option ROM is disabled and there is
450 no BIOS to start the controller. The FW starts to boot after receiving
451 the first command from the driver. The current driver has 1 second
452 timeout for the synchronous commands, which is far less than what is
453 actually required. We now wait up to MBOX_RESET_TIME (180 seconds) for
454 FW boot process.
455
456iv. In megaraid_mbox_product_info, clear the mailbox contents completely
457 before preparing the command for inquiry3. This is to ensure that the
458 FW does not get junk values in the command.
459
460v. Do away with the redundant LSI_CONFIG_COMPAT redefinition for
461 CONFIG_COMPAT. Replace <asm/ioctl32.h> with <linux/ioctl32.h>
462
463 - James Bottomley <James.Bottomley@SteelEye.com>, 08.17.2004
464 linux-scsi mailing list
465
466vi. Add support for 64-bit applications. Current drivers assume only
467 32-bit applications, even on 64-bit platforms. Use the "data" and
468 "buffer" fields of the mimd_t structure, instead of embedded 32-bit
469 addresses in application mailbox and passthru structures.
470
471vii. Move the function declarations for the management module from
472 megaraid_mm.h to megaraid_mm.c
473
Francois Camie1f8e872008-10-15 22:01:59 -0700474 - Andrew Morton, 08.19.2004
Linus Torvalds1da177e2005-04-16 15:20:36 -0700475 linux-scsi mailing list
476
477viii. Change default values for MEGARAID_NEWGEN, MEGARAID_MM, and
478 MEGARAID_MAILBOX to 'n' in Kconfig.megaraid
479
Francois Camie1f8e872008-10-15 22:01:59 -0700480 - Andrew Morton, 08.19.2004
Linus Torvalds1da177e2005-04-16 15:20:36 -0700481 linux-scsi mailing list
482
483ix. replace udelay with msleep
484
485x. Typos corrected in comments and whitespace adjustments, explicit
486 grouping of expressions.
487
488
489Release Date : Fri Jul 23 15:22:07 EDT 2004 - Atul Mukker <atulm@lsil.com>
490Current Version : 2.20.2.0 (scsi module), 2.20.1.0 (cmm module)
491Older Version : 2.20.1.0 (scsi module), 2.20.0.0 (cmm module)
492
493i. Add PCI ids for Acer ROMB 2E solution
494
495ii. Add PCI ids for I4
496
497iii. Typo corrected for subsys id for megaraid sata 300-4x
498
499iv. Remove yield() while mailbox handshake in synchronous commands
500
501
502 "My other main gripe is things like this:
503
504 + // wait for maximum 1 second for status to post
505 + for (i = 0; i < 40000; i++) {
506 + if (mbox->numstatus != 0xFF) break;
507 + udelay(25); yield();
508 + }
509
510 which litter the driver. Use of yield() in drivers is deprecated."
511
512 - James Bottomley <James.Bottomley@SteelEye.com>, 07.14.2004
513 linux-scsi mailing list
514
515v. Remove redundant __megaraid_busywait_mbox routine
516
Uwe Kleine-Koenig3dbda772009-07-23 08:31:31 +0200517vi. Fix bug in the management module, which causes a system lockup when the
Linus Torvalds1da177e2005-04-16 15:20:36 -0700518 IO module is loaded and then unloaded, followed by executing any
519 management utility. The current version of management module does not
520 handle the adapter unregister properly.
521
522 Specifically, it still keeps a reference to the unregistered
523 controllers. To avoid this, the static array adapters has been
524 replaced by a dynamic list, which gets updated every time an adapter
525 is added or removed.
526
527 Also, during unregistration of the IO module, the resources are
528 now released in the exact reverse order of the allocation time
529 sequence.
530
531
532Release Date : Fri Jun 25 18:58:43 EDT 2004 - Atul Mukker <atulm@lsil.com>
533Current Version : 2.20.1.0
534Older Version : megaraid 2.20.0.1
535
536i. Stale list pointer in adapter causes kernel panic when module
537 megaraid_mbox is unloaded
538
539
540Release Date : Thu Jun 24 20:37:11 EDT 2004 - Atul Mukker <atulm@lsil.com>
541Current Version : 2.20.0.1
542Older Version : megaraid 2.20.0.00
543
544i. Modules are not 'y' by default, but depend on current definition of
545 SCSI & PCI.
546
547ii. Redundant structure mraid_driver_t removed.
548
549iii. Miscellaneous indentation and goto/label fixes.
550 - Christoph Hellwig <hch@infradead.org>, 06.24.2004 linux-scsi
551
552iv. scsi_host_put(), do just before completing HBA shutdown.
553
554
555
556Release Date : Mon Jun 21 19:53:54 EDT 2004 - Atul Mukker <atulm@lsil.com>
557Current Version : 2.20.0.0
558Older Version : megaraid 2.20.0.rc2 and 2.00.3
559
560i. Independent module to interact with userland applications and
561 multiplex command to low level RAID module(s).
562
563 "Shared code in a third module, a "library module", is an acceptable
564 solution. modprobe automatically loads dependent modules, so users
565 running "modprobe driver1" or "modprobe driver2" would automatically
566 load the shared library module."
567
568 - Jeff Garzik <jgarzik@pobox.com> 02.25.2004 LKML
569
570 "As Jeff hinted, if your userspace<->driver API is consistent between
571 your new MPT-based RAID controllers and your existing megaraid driver,
572 then perhaps you need a single small helper module (lsiioctl or some
573 better name), loaded by both mptraid and megaraid automatically, which
574 handles registering the /dev/megaraid node dynamically. In this case,
575 both mptraid and megaraid would register with lsiioctl for each
576 adapter discovered, and lsiioctl would essentially be a switch,
577 redirecting userspace tool ioctls to the appropriate driver."
578
579 - Matt Domsch <Matt_Domsch@dell.com> 02.25.2004 LKML
580
581ii. Remove C99 initializations from pci_device id.
582
583 "pci_id_table_g would be much more readable when not using C99
584 initializers.
585 PCI table doesn't change, there's lots of users that prefer the more
586 readable variant. And it's really far less and much easier to grok
587 lines without C99 initializers."
588
589 - Christoph Hellwig <hch@infradead.org>, 05.28.2004 linux-scsi
590
591iii. Many fixes as suggested by Christoph Hellwig <hch@infradead.org> on
592 linux-scsi, 05.28.2004
593
594iv. We now support up to 32 parallel ioctl commands instead of current 1.
595 There is a conscious effort to let memory allocation not fail for ioctl
596 commands.
597
598v. Do away with internal memory management. Use pci_pool_(create|alloc)
599 instead.
600
601vi. Kill tasklet when unloading the driver.
602
603vii. Do not use "host_lock', driver has fine-grain locks now to protect all
604 data structures.
605
606viii. Optimize the build scatter-gather list routine. The callers already
607 know the data transfer address and length.
608
609ix. Better implementation of error handling and recovery. Driver now
610 performs extended errors recovery for instances like scsi cable pull.
611
612x. Disassociate the management commands with an overlaid scsi command.
613 Driver now treats the management packets as special packets and has a
614 dedicated callback routine.