blob: 804b88c760d6bf0a375c486ada3d527bf204d109 [file] [log] [blame]
Arun Murthy1668f812012-02-29 21:54:25 +05301/*
2 * Copyright (C) ST-Ericsson SA 2012
3 *
4 * Charging algorithm driver for abx500 variants
5 *
6 * License Terms: GNU General Public License v2
7 * Authors:
8 * Johan Palsson <johan.palsson@stericsson.com>
9 * Karl Komierowski <karl.komierowski@stericsson.com>
10 * Arun R Murthy <arun.murthy@stericsson.com>
11 */
12
13#include <linux/init.h>
14#include <linux/module.h>
15#include <linux/device.h>
16#include <linux/interrupt.h>
17#include <linux/delay.h>
18#include <linux/slab.h>
19#include <linux/platform_device.h>
20#include <linux/power_supply.h>
21#include <linux/completion.h>
22#include <linux/workqueue.h>
23#include <linux/kobject.h>
24#include <linux/mfd/abx500.h>
25#include <linux/mfd/abx500/ux500_chargalg.h>
26#include <linux/mfd/abx500/ab8500-bm.h>
27
28/* Watchdog kick interval */
29#define CHG_WD_INTERVAL (6 * HZ)
30
31/* End-of-charge criteria counter */
32#define EOC_COND_CNT 10
33
34/* Recharge criteria counter */
35#define RCH_COND_CNT 3
36
37#define to_abx500_chargalg_device_info(x) container_of((x), \
38 struct abx500_chargalg, chargalg_psy);
39
40enum abx500_chargers {
41 NO_CHG,
42 AC_CHG,
43 USB_CHG,
44};
45
46struct abx500_chargalg_charger_info {
47 enum abx500_chargers conn_chg;
48 enum abx500_chargers prev_conn_chg;
49 enum abx500_chargers online_chg;
50 enum abx500_chargers prev_online_chg;
51 enum abx500_chargers charger_type;
52 bool usb_chg_ok;
53 bool ac_chg_ok;
54 int usb_volt;
55 int usb_curr;
56 int ac_volt;
57 int ac_curr;
58 int usb_vset;
59 int usb_iset;
60 int ac_vset;
61 int ac_iset;
62};
63
64struct abx500_chargalg_suspension_status {
65 bool suspended_change;
66 bool ac_suspended;
67 bool usb_suspended;
68};
69
70struct abx500_chargalg_battery_data {
71 int temp;
72 int volt;
73 int avg_curr;
74 int inst_curr;
75 int percent;
76};
77
78enum abx500_chargalg_states {
79 STATE_HANDHELD_INIT,
80 STATE_HANDHELD,
81 STATE_CHG_NOT_OK_INIT,
82 STATE_CHG_NOT_OK,
83 STATE_HW_TEMP_PROTECT_INIT,
84 STATE_HW_TEMP_PROTECT,
85 STATE_NORMAL_INIT,
86 STATE_NORMAL,
87 STATE_WAIT_FOR_RECHARGE_INIT,
88 STATE_WAIT_FOR_RECHARGE,
89 STATE_MAINTENANCE_A_INIT,
90 STATE_MAINTENANCE_A,
91 STATE_MAINTENANCE_B_INIT,
92 STATE_MAINTENANCE_B,
93 STATE_TEMP_UNDEROVER_INIT,
94 STATE_TEMP_UNDEROVER,
95 STATE_TEMP_LOWHIGH_INIT,
96 STATE_TEMP_LOWHIGH,
97 STATE_SUSPENDED_INIT,
98 STATE_SUSPENDED,
99 STATE_OVV_PROTECT_INIT,
100 STATE_OVV_PROTECT,
101 STATE_SAFETY_TIMER_EXPIRED_INIT,
102 STATE_SAFETY_TIMER_EXPIRED,
103 STATE_BATT_REMOVED_INIT,
104 STATE_BATT_REMOVED,
105 STATE_WD_EXPIRED_INIT,
106 STATE_WD_EXPIRED,
107};
108
109static const char *states[] = {
110 "HANDHELD_INIT",
111 "HANDHELD",
112 "CHG_NOT_OK_INIT",
113 "CHG_NOT_OK",
114 "HW_TEMP_PROTECT_INIT",
115 "HW_TEMP_PROTECT",
116 "NORMAL_INIT",
117 "NORMAL",
118 "WAIT_FOR_RECHARGE_INIT",
119 "WAIT_FOR_RECHARGE",
120 "MAINTENANCE_A_INIT",
121 "MAINTENANCE_A",
122 "MAINTENANCE_B_INIT",
123 "MAINTENANCE_B",
124 "TEMP_UNDEROVER_INIT",
125 "TEMP_UNDEROVER",
126 "TEMP_LOWHIGH_INIT",
127 "TEMP_LOWHIGH",
128 "SUSPENDED_INIT",
129 "SUSPENDED",
130 "OVV_PROTECT_INIT",
131 "OVV_PROTECT",
132 "SAFETY_TIMER_EXPIRED_INIT",
133 "SAFETY_TIMER_EXPIRED",
134 "BATT_REMOVED_INIT",
135 "BATT_REMOVED",
136 "WD_EXPIRED_INIT",
137 "WD_EXPIRED",
138};
139
140struct abx500_chargalg_events {
141 bool batt_unknown;
142 bool mainextchnotok;
143 bool batt_ovv;
144 bool batt_rem;
145 bool btemp_underover;
146 bool btemp_lowhigh;
147 bool main_thermal_prot;
148 bool usb_thermal_prot;
149 bool main_ovv;
150 bool vbus_ovv;
151 bool usbchargernotok;
152 bool safety_timer_expired;
153 bool maintenance_timer_expired;
154 bool ac_wd_expired;
155 bool usb_wd_expired;
156 bool ac_cv_active;
157 bool usb_cv_active;
158 bool vbus_collapsed;
159};
160
161/**
162 * struct abx500_charge_curr_maximization - Charger maximization parameters
163 * @original_iset: the non optimized/maximised charger current
164 * @current_iset: the charging current used at this moment
165 * @test_delta_i: the delta between the current we want to charge and the
166 current that is really going into the battery
167 * @condition_cnt: number of iterations needed before a new charger current
168 is set
169 * @max_current: maximum charger current
170 * @wait_cnt: to avoid too fast current step down in case of charger
171 * voltage collapse, we insert this delay between step
172 * down
173 * @level: tells in how many steps the charging current has been
174 increased
175 */
176struct abx500_charge_curr_maximization {
177 int original_iset;
178 int current_iset;
179 int test_delta_i;
180 int condition_cnt;
181 int max_current;
182 int wait_cnt;
183 u8 level;
184};
185
186enum maxim_ret {
187 MAXIM_RET_NOACTION,
188 MAXIM_RET_CHANGE,
189 MAXIM_RET_IBAT_TOO_HIGH,
190};
191
192/**
193 * struct abx500_chargalg - abx500 Charging algorithm device information
194 * @dev: pointer to the structure device
195 * @charge_status: battery operating status
196 * @eoc_cnt: counter used to determine end-of_charge
197 * @rch_cnt: counter used to determine start of recharge
198 * @maintenance_chg: indicate if maintenance charge is active
199 * @t_hyst_norm temperature hysteresis when the temperature has been
200 * over or under normal limits
201 * @t_hyst_lowhigh temperature hysteresis when the temperature has been
202 * over or under the high or low limits
203 * @charge_state: current state of the charging algorithm
204 * @ccm charging current maximization parameters
205 * @chg_info: information about connected charger types
206 * @batt_data: data of the battery
207 * @susp_status: current charger suspension status
208 * @pdata: pointer to the abx500_chargalg platform data
209 * @bat: pointer to the abx500_bm platform data
210 * @chargalg_psy: structure that holds the battery properties exposed by
211 * the charging algorithm
212 * @events: structure for information about events triggered
213 * @chargalg_wq: work queue for running the charging algorithm
214 * @chargalg_periodic_work: work to run the charging algorithm periodically
215 * @chargalg_wd_work: work to kick the charger watchdog periodically
216 * @chargalg_work: work to run the charging algorithm instantly
217 * @safety_timer: charging safety timer
218 * @maintenance_timer: maintenance charging timer
219 * @chargalg_kobject: structure of type kobject
220 */
221struct abx500_chargalg {
222 struct device *dev;
223 int charge_status;
224 int eoc_cnt;
225 int rch_cnt;
226 bool maintenance_chg;
227 int t_hyst_norm;
228 int t_hyst_lowhigh;
229 enum abx500_chargalg_states charge_state;
230 struct abx500_charge_curr_maximization ccm;
231 struct abx500_chargalg_charger_info chg_info;
232 struct abx500_chargalg_battery_data batt_data;
233 struct abx500_chargalg_suspension_status susp_status;
234 struct abx500_chargalg_platform_data *pdata;
235 struct abx500_bm_data *bat;
236 struct power_supply chargalg_psy;
237 struct ux500_charger *ac_chg;
238 struct ux500_charger *usb_chg;
239 struct abx500_chargalg_events events;
240 struct workqueue_struct *chargalg_wq;
241 struct delayed_work chargalg_periodic_work;
242 struct delayed_work chargalg_wd_work;
243 struct work_struct chargalg_work;
244 struct timer_list safety_timer;
245 struct timer_list maintenance_timer;
246 struct kobject chargalg_kobject;
247};
248
249/* Main battery properties */
250static enum power_supply_property abx500_chargalg_props[] = {
251 POWER_SUPPLY_PROP_STATUS,
252 POWER_SUPPLY_PROP_HEALTH,
253};
254
255/**
256 * abx500_chargalg_safety_timer_expired() - Expiration of the safety timer
257 * @data: pointer to the abx500_chargalg structure
258 *
259 * This function gets called when the safety timer for the charger
260 * expires
261 */
262static void abx500_chargalg_safety_timer_expired(unsigned long data)
263{
264 struct abx500_chargalg *di = (struct abx500_chargalg *) data;
265 dev_err(di->dev, "Safety timer expired\n");
266 di->events.safety_timer_expired = true;
267
268 /* Trigger execution of the algorithm instantly */
269 queue_work(di->chargalg_wq, &di->chargalg_work);
270}
271
272/**
273 * abx500_chargalg_maintenance_timer_expired() - Expiration of
274 * the maintenance timer
275 * @i: pointer to the abx500_chargalg structure
276 *
277 * This function gets called when the maintenence timer
278 * expires
279 */
280static void abx500_chargalg_maintenance_timer_expired(unsigned long data)
281{
282
283 struct abx500_chargalg *di = (struct abx500_chargalg *) data;
284 dev_dbg(di->dev, "Maintenance timer expired\n");
285 di->events.maintenance_timer_expired = true;
286
287 /* Trigger execution of the algorithm instantly */
288 queue_work(di->chargalg_wq, &di->chargalg_work);
289}
290
291/**
292 * abx500_chargalg_state_to() - Change charge state
293 * @di: pointer to the abx500_chargalg structure
294 *
295 * This function gets called when a charge state change should occur
296 */
297static void abx500_chargalg_state_to(struct abx500_chargalg *di,
298 enum abx500_chargalg_states state)
299{
300 dev_dbg(di->dev,
301 "State changed: %s (From state: [%d] %s =to=> [%d] %s )\n",
302 di->charge_state == state ? "NO" : "YES",
303 di->charge_state,
304 states[di->charge_state],
305 state,
306 states[state]);
307
308 di->charge_state = state;
309}
310
311/**
312 * abx500_chargalg_check_charger_connection() - Check charger connection change
313 * @di: pointer to the abx500_chargalg structure
314 *
315 * This function will check if there is a change in the charger connection
316 * and change charge state accordingly. AC has precedence over USB.
317 */
318static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di)
319{
320 if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg ||
321 di->susp_status.suspended_change) {
322 /*
323 * Charger state changed or suspension
324 * has changed since last update
325 */
326 if ((di->chg_info.conn_chg & AC_CHG) &&
327 !di->susp_status.ac_suspended) {
328 dev_dbg(di->dev, "Charging source is AC\n");
329 if (di->chg_info.charger_type != AC_CHG) {
330 di->chg_info.charger_type = AC_CHG;
331 abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
332 }
333 } else if ((di->chg_info.conn_chg & USB_CHG) &&
334 !di->susp_status.usb_suspended) {
335 dev_dbg(di->dev, "Charging source is USB\n");
336 di->chg_info.charger_type = USB_CHG;
337 abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
338 } else if (di->chg_info.conn_chg &&
339 (di->susp_status.ac_suspended ||
340 di->susp_status.usb_suspended)) {
341 dev_dbg(di->dev, "Charging is suspended\n");
342 di->chg_info.charger_type = NO_CHG;
343 abx500_chargalg_state_to(di, STATE_SUSPENDED_INIT);
344 } else {
345 dev_dbg(di->dev, "Charging source is OFF\n");
346 di->chg_info.charger_type = NO_CHG;
347 abx500_chargalg_state_to(di, STATE_HANDHELD_INIT);
348 }
349 di->chg_info.prev_conn_chg = di->chg_info.conn_chg;
350 di->susp_status.suspended_change = false;
351 }
352 return di->chg_info.conn_chg;
353}
354
355/**
356 * abx500_chargalg_start_safety_timer() - Start charging safety timer
357 * @di: pointer to the abx500_chargalg structure
358 *
359 * The safety timer is used to avoid overcharging of old or bad batteries.
360 * There are different timers for AC and USB
361 */
362static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
363{
364 unsigned long timer_expiration = 0;
365
366 switch (di->chg_info.charger_type) {
367 case AC_CHG:
368 timer_expiration =
369 round_jiffies(jiffies +
370 (di->bat->main_safety_tmr_h * 3600 * HZ));
371 break;
372
373 case USB_CHG:
374 timer_expiration =
375 round_jiffies(jiffies +
376 (di->bat->usb_safety_tmr_h * 3600 * HZ));
377 break;
378
379 default:
380 dev_err(di->dev, "Unknown charger to charge from\n");
381 break;
382 }
383
384 di->events.safety_timer_expired = false;
385 di->safety_timer.expires = timer_expiration;
386 if (!timer_pending(&di->safety_timer))
387 add_timer(&di->safety_timer);
388 else
389 mod_timer(&di->safety_timer, timer_expiration);
390}
391
392/**
393 * abx500_chargalg_stop_safety_timer() - Stop charging safety timer
394 * @di: pointer to the abx500_chargalg structure
395 *
396 * The safety timer is stopped whenever the NORMAL state is exited
397 */
398static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di)
399{
400 di->events.safety_timer_expired = false;
401 del_timer(&di->safety_timer);
402}
403
404/**
405 * abx500_chargalg_start_maintenance_timer() - Start charging maintenance timer
406 * @di: pointer to the abx500_chargalg structure
407 * @duration: duration of ther maintenance timer in hours
408 *
409 * The maintenance timer is used to maintain the charge in the battery once
410 * the battery is considered full. These timers are chosen to match the
411 * discharge curve of the battery
412 */
413static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di,
414 int duration)
415{
416 unsigned long timer_expiration;
417
418 /* Convert from hours to jiffies */
419 timer_expiration = round_jiffies(jiffies + (duration * 3600 * HZ));
420
421 di->events.maintenance_timer_expired = false;
422 di->maintenance_timer.expires = timer_expiration;
423 if (!timer_pending(&di->maintenance_timer))
424 add_timer(&di->maintenance_timer);
425 else
426 mod_timer(&di->maintenance_timer, timer_expiration);
427}
428
429/**
430 * abx500_chargalg_stop_maintenance_timer() - Stop maintenance timer
431 * @di: pointer to the abx500_chargalg structure
432 *
433 * The maintenance timer is stopped whenever maintenance ends or when another
434 * state is entered
435 */
436static void abx500_chargalg_stop_maintenance_timer(struct abx500_chargalg *di)
437{
438 di->events.maintenance_timer_expired = false;
439 del_timer(&di->maintenance_timer);
440}
441
442/**
443 * abx500_chargalg_kick_watchdog() - Kick charger watchdog
444 * @di: pointer to the abx500_chargalg structure
445 *
446 * The charger watchdog have to be kicked periodically whenever the charger is
447 * on, else the ABB will reset the system
448 */
449static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di)
450{
451 /* Check if charger exists and kick watchdog if charging */
452 if (di->ac_chg && di->ac_chg->ops.kick_wd &&
453 di->chg_info.online_chg & AC_CHG)
454 return di->ac_chg->ops.kick_wd(di->ac_chg);
455 else if (di->usb_chg && di->usb_chg->ops.kick_wd &&
456 di->chg_info.online_chg & USB_CHG)
457 return di->usb_chg->ops.kick_wd(di->usb_chg);
458
459 return -ENXIO;
460}
461
462/**
463 * abx500_chargalg_ac_en() - Turn on/off the AC charger
464 * @di: pointer to the abx500_chargalg structure
465 * @enable: charger on/off
466 * @vset: requested charger output voltage
467 * @iset: requested charger output current
468 *
469 * The AC charger will be turned on/off with the requested charge voltage and
470 * current
471 */
472static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable,
473 int vset, int iset)
474{
475 if (!di->ac_chg || !di->ac_chg->ops.enable)
476 return -ENXIO;
477
478 /* Select maximum of what both the charger and the battery supports */
479 if (di->ac_chg->max_out_volt)
480 vset = min(vset, di->ac_chg->max_out_volt);
481 if (di->ac_chg->max_out_curr)
482 iset = min(iset, di->ac_chg->max_out_curr);
483
484 di->chg_info.ac_iset = iset;
485 di->chg_info.ac_vset = vset;
486
487 return di->ac_chg->ops.enable(di->ac_chg, enable, vset, iset);
488}
489
490/**
491 * abx500_chargalg_usb_en() - Turn on/off the USB charger
492 * @di: pointer to the abx500_chargalg structure
493 * @enable: charger on/off
494 * @vset: requested charger output voltage
495 * @iset: requested charger output current
496 *
497 * The USB charger will be turned on/off with the requested charge voltage and
498 * current
499 */
500static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable,
501 int vset, int iset)
502{
503 if (!di->usb_chg || !di->usb_chg->ops.enable)
504 return -ENXIO;
505
506 /* Select maximum of what both the charger and the battery supports */
507 if (di->usb_chg->max_out_volt)
508 vset = min(vset, di->usb_chg->max_out_volt);
509 if (di->usb_chg->max_out_curr)
510 iset = min(iset, di->usb_chg->max_out_curr);
511
512 di->chg_info.usb_iset = iset;
513 di->chg_info.usb_vset = vset;
514
515 return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset);
516}
517
518/**
519 * abx500_chargalg_update_chg_curr() - Update charger current
520 * @di: pointer to the abx500_chargalg structure
521 * @iset: requested charger output current
522 *
523 * The charger output current will be updated for the charger
524 * that is currently in use
525 */
526static int abx500_chargalg_update_chg_curr(struct abx500_chargalg *di,
527 int iset)
528{
529 /* Check if charger exists and update current if charging */
530 if (di->ac_chg && di->ac_chg->ops.update_curr &&
531 di->chg_info.charger_type & AC_CHG) {
532 /*
533 * Select maximum of what both the charger
534 * and the battery supports
535 */
536 if (di->ac_chg->max_out_curr)
537 iset = min(iset, di->ac_chg->max_out_curr);
538
539 di->chg_info.ac_iset = iset;
540
541 return di->ac_chg->ops.update_curr(di->ac_chg, iset);
542 } else if (di->usb_chg && di->usb_chg->ops.update_curr &&
543 di->chg_info.charger_type & USB_CHG) {
544 /*
545 * Select maximum of what both the charger
546 * and the battery supports
547 */
548 if (di->usb_chg->max_out_curr)
549 iset = min(iset, di->usb_chg->max_out_curr);
550
551 di->chg_info.usb_iset = iset;
552
553 return di->usb_chg->ops.update_curr(di->usb_chg, iset);
554 }
555
556 return -ENXIO;
557}
558
559/**
560 * abx500_chargalg_stop_charging() - Stop charging
561 * @di: pointer to the abx500_chargalg structure
562 *
563 * This function is called from any state where charging should be stopped.
564 * All charging is disabled and all status parameters and timers are changed
565 * accordingly
566 */
567static void abx500_chargalg_stop_charging(struct abx500_chargalg *di)
568{
569 abx500_chargalg_ac_en(di, false, 0, 0);
570 abx500_chargalg_usb_en(di, false, 0, 0);
571 abx500_chargalg_stop_safety_timer(di);
572 abx500_chargalg_stop_maintenance_timer(di);
573 di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
574 di->maintenance_chg = false;
575 cancel_delayed_work(&di->chargalg_wd_work);
576 power_supply_changed(&di->chargalg_psy);
577}
578
579/**
580 * abx500_chargalg_hold_charging() - Pauses charging
581 * @di: pointer to the abx500_chargalg structure
582 *
583 * This function is called in the case where maintenance charging has been
584 * disabled and instead a battery voltage mode is entered to check when the
585 * battery voltage has reached a certain recharge voltage
586 */
587static void abx500_chargalg_hold_charging(struct abx500_chargalg *di)
588{
589 abx500_chargalg_ac_en(di, false, 0, 0);
590 abx500_chargalg_usb_en(di, false, 0, 0);
591 abx500_chargalg_stop_safety_timer(di);
592 abx500_chargalg_stop_maintenance_timer(di);
593 di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
594 di->maintenance_chg = false;
595 cancel_delayed_work(&di->chargalg_wd_work);
596 power_supply_changed(&di->chargalg_psy);
597}
598
599/**
600 * abx500_chargalg_start_charging() - Start the charger
601 * @di: pointer to the abx500_chargalg structure
602 * @vset: requested charger output voltage
603 * @iset: requested charger output current
604 *
605 * A charger will be enabled depending on the requested charger type that was
606 * detected previously.
607 */
608static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
609 int vset, int iset)
610{
611 switch (di->chg_info.charger_type) {
612 case AC_CHG:
613 dev_dbg(di->dev,
614 "AC parameters: Vset %d, Ich %d\n", vset, iset);
615 abx500_chargalg_usb_en(di, false, 0, 0);
616 abx500_chargalg_ac_en(di, true, vset, iset);
617 break;
618
619 case USB_CHG:
620 dev_dbg(di->dev,
621 "USB parameters: Vset %d, Ich %d\n", vset, iset);
622 abx500_chargalg_ac_en(di, false, 0, 0);
623 abx500_chargalg_usb_en(di, true, vset, iset);
624 break;
625
626 default:
627 dev_err(di->dev, "Unknown charger to charge from\n");
628 break;
629 }
630}
631
632/**
633 * abx500_chargalg_check_temp() - Check battery temperature ranges
634 * @di: pointer to the abx500_chargalg structure
635 *
636 * The battery temperature is checked against the predefined limits and the
637 * charge state is changed accordingly
638 */
639static void abx500_chargalg_check_temp(struct abx500_chargalg *di)
640{
641 if (di->batt_data.temp > (di->bat->temp_low + di->t_hyst_norm) &&
642 di->batt_data.temp < (di->bat->temp_high - di->t_hyst_norm)) {
643 /* Temp OK! */
644 di->events.btemp_underover = false;
645 di->events.btemp_lowhigh = false;
646 di->t_hyst_norm = 0;
647 di->t_hyst_lowhigh = 0;
648 } else {
649 if (((di->batt_data.temp >= di->bat->temp_high) &&
650 (di->batt_data.temp <
651 (di->bat->temp_over - di->t_hyst_lowhigh))) ||
652 ((di->batt_data.temp >
653 (di->bat->temp_under + di->t_hyst_lowhigh)) &&
654 (di->batt_data.temp <= di->bat->temp_low))) {
655 /* TEMP minor!!!!! */
656 di->events.btemp_underover = false;
657 di->events.btemp_lowhigh = true;
658 di->t_hyst_norm = di->bat->temp_hysteresis;
659 di->t_hyst_lowhigh = 0;
660 } else if (di->batt_data.temp <= di->bat->temp_under ||
661 di->batt_data.temp >= di->bat->temp_over) {
662 /* TEMP major!!!!! */
663 di->events.btemp_underover = true;
664 di->events.btemp_lowhigh = false;
665 di->t_hyst_norm = 0;
666 di->t_hyst_lowhigh = di->bat->temp_hysteresis;
667 } else {
668 /* Within hysteresis */
669 dev_dbg(di->dev, "Within hysteresis limit temp: %d "
670 "hyst_lowhigh %d, hyst normal %d\n",
671 di->batt_data.temp, di->t_hyst_lowhigh,
672 di->t_hyst_norm);
673 }
674 }
675}
676
677/**
678 * abx500_chargalg_check_charger_voltage() - Check charger voltage
679 * @di: pointer to the abx500_chargalg structure
680 *
681 * Charger voltage is checked against maximum limit
682 */
683static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di)
684{
685 if (di->chg_info.usb_volt > di->bat->chg_params->usb_volt_max)
686 di->chg_info.usb_chg_ok = false;
687 else
688 di->chg_info.usb_chg_ok = true;
689
690 if (di->chg_info.ac_volt > di->bat->chg_params->ac_volt_max)
691 di->chg_info.ac_chg_ok = false;
692 else
693 di->chg_info.ac_chg_ok = true;
694
695}
696
697/**
698 * abx500_chargalg_end_of_charge() - Check if end-of-charge criteria is fulfilled
699 * @di: pointer to the abx500_chargalg structure
700 *
701 * End-of-charge criteria is fulfilled when the battery voltage is above a
702 * certain limit and the battery current is below a certain limit for a
703 * predefined number of consecutive seconds. If true, the battery is full
704 */
705static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di)
706{
707 if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING &&
708 di->charge_state == STATE_NORMAL &&
709 !di->maintenance_chg && (di->batt_data.volt >=
710 di->bat->bat_type[di->bat->batt_id].termination_vol ||
711 di->events.usb_cv_active || di->events.ac_cv_active) &&
712 di->batt_data.avg_curr <
713 di->bat->bat_type[di->bat->batt_id].termination_curr &&
714 di->batt_data.avg_curr > 0) {
715 if (++di->eoc_cnt >= EOC_COND_CNT) {
716 di->eoc_cnt = 0;
717 di->charge_status = POWER_SUPPLY_STATUS_FULL;
718 di->maintenance_chg = true;
719 dev_dbg(di->dev, "EOC reached!\n");
720 power_supply_changed(&di->chargalg_psy);
721 } else {
722 dev_dbg(di->dev,
723 " EOC limit reached for the %d"
724 " time, out of %d before EOC\n",
725 di->eoc_cnt,
726 EOC_COND_CNT);
727 }
728 } else {
729 di->eoc_cnt = 0;
730 }
731}
732
733static void init_maxim_chg_curr(struct abx500_chargalg *di)
734{
735 di->ccm.original_iset =
736 di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
737 di->ccm.current_iset =
738 di->bat->bat_type[di->bat->batt_id].normal_cur_lvl;
739 di->ccm.test_delta_i = di->bat->maxi->charger_curr_step;
740 di->ccm.max_current = di->bat->maxi->chg_curr;
741 di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
742 di->ccm.level = 0;
743}
744
745/**
746 * abx500_chargalg_chg_curr_maxim - increases the charger current to
747 * compensate for the system load
748 * @di pointer to the abx500_chargalg structure
749 *
750 * This maximization function is used to raise the charger current to get the
751 * battery current as close to the optimal value as possible. The battery
752 * current during charging is affected by the system load
753 */
754static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
755{
756 int delta_i;
757
758 if (!di->bat->maxi->ena_maxi)
759 return MAXIM_RET_NOACTION;
760
761 delta_i = di->ccm.original_iset - di->batt_data.inst_curr;
762
763 if (di->events.vbus_collapsed) {
764 dev_dbg(di->dev, "Charger voltage has collapsed %d\n",
765 di->ccm.wait_cnt);
766 if (di->ccm.wait_cnt == 0) {
767 dev_dbg(di->dev, "lowering current\n");
768 di->ccm.wait_cnt++;
769 di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
770 di->ccm.max_current =
771 di->ccm.current_iset - di->ccm.test_delta_i;
772 di->ccm.current_iset = di->ccm.max_current;
773 di->ccm.level--;
774 return MAXIM_RET_CHANGE;
775 } else {
776 dev_dbg(di->dev, "waiting\n");
777 /* Let's go in here twice before lowering curr again */
778 di->ccm.wait_cnt = (di->ccm.wait_cnt + 1) % 3;
779 return MAXIM_RET_NOACTION;
780 }
781 }
782
783 di->ccm.wait_cnt = 0;
784
785 if ((di->batt_data.inst_curr > di->ccm.original_iset)) {
786 dev_dbg(di->dev, " Maximization Ibat (%dmA) too high"
787 " (limit %dmA) (current iset: %dmA)!\n",
788 di->batt_data.inst_curr, di->ccm.original_iset,
789 di->ccm.current_iset);
790
791 if (di->ccm.current_iset == di->ccm.original_iset)
792 return MAXIM_RET_NOACTION;
793
794 di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
795 di->ccm.current_iset = di->ccm.original_iset;
796 di->ccm.level = 0;
797
798 return MAXIM_RET_IBAT_TOO_HIGH;
799 }
800
801 if (delta_i > di->ccm.test_delta_i &&
802 (di->ccm.current_iset + di->ccm.test_delta_i) <
803 di->ccm.max_current) {
804 if (di->ccm.condition_cnt-- == 0) {
805 /* Increse the iset with cco.test_delta_i */
806 di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
807 di->ccm.current_iset += di->ccm.test_delta_i;
808 di->ccm.level++;
809 dev_dbg(di->dev, " Maximization needed, increase"
810 " with %d mA to %dmA (Optimal ibat: %d)"
811 " Level %d\n",
812 di->ccm.test_delta_i,
813 di->ccm.current_iset,
814 di->ccm.original_iset,
815 di->ccm.level);
816 return MAXIM_RET_CHANGE;
817 } else {
818 return MAXIM_RET_NOACTION;
819 }
820 } else {
821 di->ccm.condition_cnt = di->bat->maxi->wait_cycles;
822 return MAXIM_RET_NOACTION;
823 }
824}
825
826static void handle_maxim_chg_curr(struct abx500_chargalg *di)
827{
828 enum maxim_ret ret;
829 int result;
830
831 ret = abx500_chargalg_chg_curr_maxim(di);
832 switch (ret) {
833 case MAXIM_RET_CHANGE:
834 result = abx500_chargalg_update_chg_curr(di,
835 di->ccm.current_iset);
836 if (result)
837 dev_err(di->dev, "failed to set chg curr\n");
838 break;
839 case MAXIM_RET_IBAT_TOO_HIGH:
840 result = abx500_chargalg_update_chg_curr(di,
841 di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
842 if (result)
843 dev_err(di->dev, "failed to set chg curr\n");
844 break;
845
846 case MAXIM_RET_NOACTION:
847 default:
848 /* Do nothing..*/
849 break;
850 }
851}
852
853static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data)
854{
855 struct power_supply *psy;
856 struct power_supply *ext;
857 struct abx500_chargalg *di;
858 union power_supply_propval ret;
859 int i, j;
860 bool psy_found = false;
861
862 psy = (struct power_supply *)data;
863 ext = dev_get_drvdata(dev);
864 di = to_abx500_chargalg_device_info(psy);
865 /* For all psy where the driver name appears in any supplied_to */
866 for (i = 0; i < ext->num_supplicants; i++) {
867 if (!strcmp(ext->supplied_to[i], psy->name))
868 psy_found = true;
869 }
870 if (!psy_found)
871 return 0;
872
873 /* Go through all properties for the psy */
874 for (j = 0; j < ext->num_properties; j++) {
875 enum power_supply_property prop;
876 prop = ext->properties[j];
877
878 /* Initialize chargers if not already done */
879 if (!di->ac_chg &&
880 ext->type == POWER_SUPPLY_TYPE_MAINS)
881 di->ac_chg = psy_to_ux500_charger(ext);
882 else if (!di->usb_chg &&
883 ext->type == POWER_SUPPLY_TYPE_USB)
884 di->usb_chg = psy_to_ux500_charger(ext);
885
886 if (ext->get_property(ext, prop, &ret))
887 continue;
888 switch (prop) {
889 case POWER_SUPPLY_PROP_PRESENT:
890 switch (ext->type) {
891 case POWER_SUPPLY_TYPE_BATTERY:
892 /* Battery present */
893 if (ret.intval)
894 di->events.batt_rem = false;
895 /* Battery removed */
896 else
897 di->events.batt_rem = true;
898 break;
899 case POWER_SUPPLY_TYPE_MAINS:
900 /* AC disconnected */
901 if (!ret.intval &&
902 (di->chg_info.conn_chg & AC_CHG)) {
903 di->chg_info.prev_conn_chg =
904 di->chg_info.conn_chg;
905 di->chg_info.conn_chg &= ~AC_CHG;
906 }
907 /* AC connected */
908 else if (ret.intval &&
909 !(di->chg_info.conn_chg & AC_CHG)) {
910 di->chg_info.prev_conn_chg =
911 di->chg_info.conn_chg;
912 di->chg_info.conn_chg |= AC_CHG;
913 }
914 break;
915 case POWER_SUPPLY_TYPE_USB:
916 /* USB disconnected */
917 if (!ret.intval &&
918 (di->chg_info.conn_chg & USB_CHG)) {
919 di->chg_info.prev_conn_chg =
920 di->chg_info.conn_chg;
921 di->chg_info.conn_chg &= ~USB_CHG;
922 }
923 /* USB connected */
924 else if (ret.intval &&
925 !(di->chg_info.conn_chg & USB_CHG)) {
926 di->chg_info.prev_conn_chg =
927 di->chg_info.conn_chg;
928 di->chg_info.conn_chg |= USB_CHG;
929 }
930 break;
931 default:
932 break;
933 }
934 break;
935
936 case POWER_SUPPLY_PROP_ONLINE:
937 switch (ext->type) {
938 case POWER_SUPPLY_TYPE_BATTERY:
939 break;
940 case POWER_SUPPLY_TYPE_MAINS:
941 /* AC offline */
942 if (!ret.intval &&
943 (di->chg_info.online_chg & AC_CHG)) {
944 di->chg_info.prev_online_chg =
945 di->chg_info.online_chg;
946 di->chg_info.online_chg &= ~AC_CHG;
947 }
948 /* AC online */
949 else if (ret.intval &&
950 !(di->chg_info.online_chg & AC_CHG)) {
951 di->chg_info.prev_online_chg =
952 di->chg_info.online_chg;
953 di->chg_info.online_chg |= AC_CHG;
954 queue_delayed_work(di->chargalg_wq,
955 &di->chargalg_wd_work, 0);
956 }
957 break;
958 case POWER_SUPPLY_TYPE_USB:
959 /* USB offline */
960 if (!ret.intval &&
961 (di->chg_info.online_chg & USB_CHG)) {
962 di->chg_info.prev_online_chg =
963 di->chg_info.online_chg;
964 di->chg_info.online_chg &= ~USB_CHG;
965 }
966 /* USB online */
967 else if (ret.intval &&
968 !(di->chg_info.online_chg & USB_CHG)) {
969 di->chg_info.prev_online_chg =
970 di->chg_info.online_chg;
971 di->chg_info.online_chg |= USB_CHG;
972 queue_delayed_work(di->chargalg_wq,
973 &di->chargalg_wd_work, 0);
974 }
975 break;
976 default:
977 break;
978 }
979 break;
980
981 case POWER_SUPPLY_PROP_HEALTH:
982 switch (ext->type) {
983 case POWER_SUPPLY_TYPE_BATTERY:
984 break;
985 case POWER_SUPPLY_TYPE_MAINS:
986 switch (ret.intval) {
987 case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
988 di->events.mainextchnotok = true;
989 di->events.main_thermal_prot = false;
990 di->events.main_ovv = false;
991 di->events.ac_wd_expired = false;
992 break;
993 case POWER_SUPPLY_HEALTH_DEAD:
994 di->events.ac_wd_expired = true;
995 di->events.mainextchnotok = false;
996 di->events.main_ovv = false;
997 di->events.main_thermal_prot = false;
998 break;
999 case POWER_SUPPLY_HEALTH_COLD:
1000 case POWER_SUPPLY_HEALTH_OVERHEAT:
1001 di->events.main_thermal_prot = true;
1002 di->events.mainextchnotok = false;
1003 di->events.main_ovv = false;
1004 di->events.ac_wd_expired = false;
1005 break;
1006 case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
1007 di->events.main_ovv = true;
1008 di->events.mainextchnotok = false;
1009 di->events.main_thermal_prot = false;
1010 di->events.ac_wd_expired = false;
1011 break;
1012 case POWER_SUPPLY_HEALTH_GOOD:
1013 di->events.main_thermal_prot = false;
1014 di->events.mainextchnotok = false;
1015 di->events.main_ovv = false;
1016 di->events.ac_wd_expired = false;
1017 break;
1018 default:
1019 break;
1020 }
1021 break;
1022
1023 case POWER_SUPPLY_TYPE_USB:
1024 switch (ret.intval) {
1025 case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
1026 di->events.usbchargernotok = true;
1027 di->events.usb_thermal_prot = false;
1028 di->events.vbus_ovv = false;
1029 di->events.usb_wd_expired = false;
1030 break;
1031 case POWER_SUPPLY_HEALTH_DEAD:
1032 di->events.usb_wd_expired = true;
1033 di->events.usbchargernotok = false;
1034 di->events.usb_thermal_prot = false;
1035 di->events.vbus_ovv = false;
1036 break;
1037 case POWER_SUPPLY_HEALTH_COLD:
1038 case POWER_SUPPLY_HEALTH_OVERHEAT:
1039 di->events.usb_thermal_prot = true;
1040 di->events.usbchargernotok = false;
1041 di->events.vbus_ovv = false;
1042 di->events.usb_wd_expired = false;
1043 break;
1044 case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
1045 di->events.vbus_ovv = true;
1046 di->events.usbchargernotok = false;
1047 di->events.usb_thermal_prot = false;
1048 di->events.usb_wd_expired = false;
1049 break;
1050 case POWER_SUPPLY_HEALTH_GOOD:
1051 di->events.usbchargernotok = false;
1052 di->events.usb_thermal_prot = false;
1053 di->events.vbus_ovv = false;
1054 di->events.usb_wd_expired = false;
1055 break;
1056 default:
1057 break;
1058 }
1059 default:
1060 break;
1061 }
1062 break;
1063
1064 case POWER_SUPPLY_PROP_VOLTAGE_NOW:
1065 switch (ext->type) {
1066 case POWER_SUPPLY_TYPE_BATTERY:
1067 di->batt_data.volt = ret.intval / 1000;
1068 break;
1069 case POWER_SUPPLY_TYPE_MAINS:
1070 di->chg_info.ac_volt = ret.intval / 1000;
1071 break;
1072 case POWER_SUPPLY_TYPE_USB:
1073 di->chg_info.usb_volt = ret.intval / 1000;
1074 break;
1075 default:
1076 break;
1077 }
1078 break;
1079
1080 case POWER_SUPPLY_PROP_VOLTAGE_AVG:
1081 switch (ext->type) {
1082 case POWER_SUPPLY_TYPE_MAINS:
1083 /* AVG is used to indicate when we are
1084 * in CV mode */
1085 if (ret.intval)
1086 di->events.ac_cv_active = true;
1087 else
1088 di->events.ac_cv_active = false;
1089
1090 break;
1091 case POWER_SUPPLY_TYPE_USB:
1092 /* AVG is used to indicate when we are
1093 * in CV mode */
1094 if (ret.intval)
1095 di->events.usb_cv_active = true;
1096 else
1097 di->events.usb_cv_active = false;
1098
1099 break;
1100 default:
1101 break;
1102 }
1103 break;
1104
1105 case POWER_SUPPLY_PROP_TECHNOLOGY:
1106 switch (ext->type) {
1107 case POWER_SUPPLY_TYPE_BATTERY:
1108 if (ret.intval)
1109 di->events.batt_unknown = false;
1110 else
1111 di->events.batt_unknown = true;
1112
1113 break;
1114 default:
1115 break;
1116 }
1117 break;
1118
1119 case POWER_SUPPLY_PROP_TEMP:
1120 di->batt_data.temp = ret.intval / 10;
1121 break;
1122
1123 case POWER_SUPPLY_PROP_CURRENT_NOW:
1124 switch (ext->type) {
1125 case POWER_SUPPLY_TYPE_MAINS:
1126 di->chg_info.ac_curr =
1127 ret.intval / 1000;
1128 break;
1129 case POWER_SUPPLY_TYPE_USB:
1130 di->chg_info.usb_curr =
1131 ret.intval / 1000;
1132 break;
1133 case POWER_SUPPLY_TYPE_BATTERY:
1134 di->batt_data.inst_curr = ret.intval / 1000;
1135 break;
1136 default:
1137 break;
1138 }
1139 break;
1140
1141 case POWER_SUPPLY_PROP_CURRENT_AVG:
1142 switch (ext->type) {
1143 case POWER_SUPPLY_TYPE_BATTERY:
1144 di->batt_data.avg_curr = ret.intval / 1000;
1145 break;
1146 case POWER_SUPPLY_TYPE_USB:
1147 if (ret.intval)
1148 di->events.vbus_collapsed = true;
1149 else
1150 di->events.vbus_collapsed = false;
1151 break;
1152 default:
1153 break;
1154 }
1155 break;
1156 case POWER_SUPPLY_PROP_CAPACITY:
1157 di->batt_data.percent = ret.intval;
1158 break;
1159 default:
1160 break;
1161 }
1162 }
1163 return 0;
1164}
1165
1166/**
1167 * abx500_chargalg_external_power_changed() - callback for power supply changes
1168 * @psy: pointer to the structure power_supply
1169 *
1170 * This function is the entry point of the pointer external_power_changed
1171 * of the structure power_supply.
1172 * This function gets executed when there is a change in any external power
1173 * supply that this driver needs to be notified of.
1174 */
1175static void abx500_chargalg_external_power_changed(struct power_supply *psy)
1176{
1177 struct abx500_chargalg *di = to_abx500_chargalg_device_info(psy);
1178
1179 /*
1180 * Trigger execution of the algorithm instantly and read
1181 * all power_supply properties there instead
1182 */
1183 queue_work(di->chargalg_wq, &di->chargalg_work);
1184}
1185
1186/**
1187 * abx500_chargalg_algorithm() - Main function for the algorithm
1188 * @di: pointer to the abx500_chargalg structure
1189 *
1190 * This is the main control function for the charging algorithm.
1191 * It is called periodically or when something happens that will
1192 * trigger a state change
1193 */
1194static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
1195{
1196 int charger_status;
1197
1198 /* Collect data from all power_supply class devices */
1199 class_for_each_device(power_supply_class, NULL,
1200 &di->chargalg_psy, abx500_chargalg_get_ext_psy_data);
1201
1202 abx500_chargalg_end_of_charge(di);
1203 abx500_chargalg_check_temp(di);
1204 abx500_chargalg_check_charger_voltage(di);
1205
1206 charger_status = abx500_chargalg_check_charger_connection(di);
1207 /*
1208 * First check if we have a charger connected.
1209 * Also we don't allow charging of unknown batteries if configured
1210 * this way
1211 */
1212 if (!charger_status ||
1213 (di->events.batt_unknown && !di->bat->chg_unknown_bat)) {
1214 if (di->charge_state != STATE_HANDHELD) {
1215 di->events.safety_timer_expired = false;
1216 abx500_chargalg_state_to(di, STATE_HANDHELD_INIT);
1217 }
1218 }
1219
1220 /* If suspended, we should not continue checking the flags */
1221 else if (di->charge_state == STATE_SUSPENDED_INIT ||
1222 di->charge_state == STATE_SUSPENDED) {
1223 /* We don't do anything here, just don,t continue */
1224 }
1225
1226 /* Safety timer expiration */
1227 else if (di->events.safety_timer_expired) {
1228 if (di->charge_state != STATE_SAFETY_TIMER_EXPIRED)
1229 abx500_chargalg_state_to(di,
1230 STATE_SAFETY_TIMER_EXPIRED_INIT);
1231 }
1232 /*
1233 * Check if any interrupts has occured
1234 * that will prevent us from charging
1235 */
1236
1237 /* Battery removed */
1238 else if (di->events.batt_rem) {
1239 if (di->charge_state != STATE_BATT_REMOVED)
1240 abx500_chargalg_state_to(di, STATE_BATT_REMOVED_INIT);
1241 }
1242 /* Main or USB charger not ok. */
1243 else if (di->events.mainextchnotok || di->events.usbchargernotok) {
1244 /*
1245 * If vbus_collapsed is set, we have to lower the charger
1246 * current, which is done in the normal state below
1247 */
1248 if (di->charge_state != STATE_CHG_NOT_OK &&
1249 !di->events.vbus_collapsed)
1250 abx500_chargalg_state_to(di, STATE_CHG_NOT_OK_INIT);
1251 }
1252 /* VBUS, Main or VBAT OVV. */
1253 else if (di->events.vbus_ovv ||
1254 di->events.main_ovv ||
1255 di->events.batt_ovv ||
1256 !di->chg_info.usb_chg_ok ||
1257 !di->chg_info.ac_chg_ok) {
1258 if (di->charge_state != STATE_OVV_PROTECT)
1259 abx500_chargalg_state_to(di, STATE_OVV_PROTECT_INIT);
1260 }
1261 /* USB Thermal, stop charging */
1262 else if (di->events.main_thermal_prot ||
1263 di->events.usb_thermal_prot) {
1264 if (di->charge_state != STATE_HW_TEMP_PROTECT)
1265 abx500_chargalg_state_to(di,
1266 STATE_HW_TEMP_PROTECT_INIT);
1267 }
1268 /* Battery temp over/under */
1269 else if (di->events.btemp_underover) {
1270 if (di->charge_state != STATE_TEMP_UNDEROVER)
1271 abx500_chargalg_state_to(di,
1272 STATE_TEMP_UNDEROVER_INIT);
1273 }
1274 /* Watchdog expired */
1275 else if (di->events.ac_wd_expired ||
1276 di->events.usb_wd_expired) {
1277 if (di->charge_state != STATE_WD_EXPIRED)
1278 abx500_chargalg_state_to(di, STATE_WD_EXPIRED_INIT);
1279 }
1280 /* Battery temp high/low */
1281 else if (di->events.btemp_lowhigh) {
1282 if (di->charge_state != STATE_TEMP_LOWHIGH)
1283 abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH_INIT);
1284 }
1285
1286 dev_dbg(di->dev,
1287 "[CHARGALG] Vb %d Ib_avg %d Ib_inst %d Tb %d Cap %d Maint %d "
1288 "State %s Active_chg %d Chg_status %d AC %d USB %d "
1289 "AC_online %d USB_online %d AC_CV %d USB_CV %d AC_I %d "
1290 "USB_I %d AC_Vset %d AC_Iset %d USB_Vset %d USB_Iset %d\n",
1291 di->batt_data.volt,
1292 di->batt_data.avg_curr,
1293 di->batt_data.inst_curr,
1294 di->batt_data.temp,
1295 di->batt_data.percent,
1296 di->maintenance_chg,
1297 states[di->charge_state],
1298 di->chg_info.charger_type,
1299 di->charge_status,
1300 di->chg_info.conn_chg & AC_CHG,
1301 di->chg_info.conn_chg & USB_CHG,
1302 di->chg_info.online_chg & AC_CHG,
1303 di->chg_info.online_chg & USB_CHG,
1304 di->events.ac_cv_active,
1305 di->events.usb_cv_active,
1306 di->chg_info.ac_curr,
1307 di->chg_info.usb_curr,
1308 di->chg_info.ac_vset,
1309 di->chg_info.ac_iset,
1310 di->chg_info.usb_vset,
1311 di->chg_info.usb_iset);
1312
1313 switch (di->charge_state) {
1314 case STATE_HANDHELD_INIT:
1315 abx500_chargalg_stop_charging(di);
1316 di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
1317 abx500_chargalg_state_to(di, STATE_HANDHELD);
1318 /* Intentional fallthrough */
1319
1320 case STATE_HANDHELD:
1321 break;
1322
1323 case STATE_SUSPENDED_INIT:
1324 if (di->susp_status.ac_suspended)
1325 abx500_chargalg_ac_en(di, false, 0, 0);
1326 if (di->susp_status.usb_suspended)
1327 abx500_chargalg_usb_en(di, false, 0, 0);
1328 abx500_chargalg_stop_safety_timer(di);
1329 abx500_chargalg_stop_maintenance_timer(di);
1330 di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
1331 di->maintenance_chg = false;
1332 abx500_chargalg_state_to(di, STATE_SUSPENDED);
1333 power_supply_changed(&di->chargalg_psy);
1334 /* Intentional fallthrough */
1335
1336 case STATE_SUSPENDED:
1337 /* CHARGING is suspended */
1338 break;
1339
1340 case STATE_BATT_REMOVED_INIT:
1341 abx500_chargalg_stop_charging(di);
1342 abx500_chargalg_state_to(di, STATE_BATT_REMOVED);
1343 /* Intentional fallthrough */
1344
1345 case STATE_BATT_REMOVED:
1346 if (!di->events.batt_rem)
1347 abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
1348 break;
1349
1350 case STATE_HW_TEMP_PROTECT_INIT:
1351 abx500_chargalg_stop_charging(di);
1352 abx500_chargalg_state_to(di, STATE_HW_TEMP_PROTECT);
1353 /* Intentional fallthrough */
1354
1355 case STATE_HW_TEMP_PROTECT:
1356 if (!di->events.main_thermal_prot &&
1357 !di->events.usb_thermal_prot)
1358 abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
1359 break;
1360
1361 case STATE_OVV_PROTECT_INIT:
1362 abx500_chargalg_stop_charging(di);
1363 abx500_chargalg_state_to(di, STATE_OVV_PROTECT);
1364 /* Intentional fallthrough */
1365
1366 case STATE_OVV_PROTECT:
1367 if (!di->events.vbus_ovv &&
1368 !di->events.main_ovv &&
1369 !di->events.batt_ovv &&
1370 di->chg_info.usb_chg_ok &&
1371 di->chg_info.ac_chg_ok)
1372 abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
1373 break;
1374
1375 case STATE_CHG_NOT_OK_INIT:
1376 abx500_chargalg_stop_charging(di);
1377 abx500_chargalg_state_to(di, STATE_CHG_NOT_OK);
1378 /* Intentional fallthrough */
1379
1380 case STATE_CHG_NOT_OK:
1381 if (!di->events.mainextchnotok &&
1382 !di->events.usbchargernotok)
1383 abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
1384 break;
1385
1386 case STATE_SAFETY_TIMER_EXPIRED_INIT:
1387 abx500_chargalg_stop_charging(di);
1388 abx500_chargalg_state_to(di, STATE_SAFETY_TIMER_EXPIRED);
1389 /* Intentional fallthrough */
1390
1391 case STATE_SAFETY_TIMER_EXPIRED:
1392 /* We exit this state when charger is removed */
1393 break;
1394
1395 case STATE_NORMAL_INIT:
1396 abx500_chargalg_start_charging(di,
1397 di->bat->bat_type[di->bat->batt_id].normal_vol_lvl,
1398 di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
1399 abx500_chargalg_state_to(di, STATE_NORMAL);
1400 abx500_chargalg_start_safety_timer(di);
1401 abx500_chargalg_stop_maintenance_timer(di);
1402 init_maxim_chg_curr(di);
1403 di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
1404 di->eoc_cnt = 0;
1405 di->maintenance_chg = false;
1406 power_supply_changed(&di->chargalg_psy);
1407
1408 break;
1409
1410 case STATE_NORMAL:
1411 handle_maxim_chg_curr(di);
1412 if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&
1413 di->maintenance_chg) {
1414 if (di->bat->no_maintenance)
1415 abx500_chargalg_state_to(di,
1416 STATE_WAIT_FOR_RECHARGE_INIT);
1417 else
1418 abx500_chargalg_state_to(di,
1419 STATE_MAINTENANCE_A_INIT);
1420 }
1421 break;
1422
1423 /* This state will be used when the maintenance state is disabled */
1424 case STATE_WAIT_FOR_RECHARGE_INIT:
1425 abx500_chargalg_hold_charging(di);
1426 abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE);
1427 di->rch_cnt = RCH_COND_CNT;
1428 /* Intentional fallthrough */
1429
1430 case STATE_WAIT_FOR_RECHARGE:
1431 if (di->batt_data.volt <=
1432 di->bat->bat_type[di->bat->batt_id].recharge_vol) {
1433 if (di->rch_cnt-- == 0)
1434 abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
1435 } else
1436 di->rch_cnt = RCH_COND_CNT;
1437 break;
1438
1439 case STATE_MAINTENANCE_A_INIT:
1440 abx500_chargalg_stop_safety_timer(di);
1441 abx500_chargalg_start_maintenance_timer(di,
1442 di->bat->bat_type[
1443 di->bat->batt_id].maint_a_chg_timer_h);
1444 abx500_chargalg_start_charging(di,
1445 di->bat->bat_type[
1446 di->bat->batt_id].maint_a_vol_lvl,
1447 di->bat->bat_type[
1448 di->bat->batt_id].maint_a_cur_lvl);
1449 abx500_chargalg_state_to(di, STATE_MAINTENANCE_A);
1450 power_supply_changed(&di->chargalg_psy);
1451 /* Intentional fallthrough*/
1452
1453 case STATE_MAINTENANCE_A:
1454 if (di->events.maintenance_timer_expired) {
1455 abx500_chargalg_stop_maintenance_timer(di);
1456 abx500_chargalg_state_to(di, STATE_MAINTENANCE_B_INIT);
1457 }
1458 break;
1459
1460 case STATE_MAINTENANCE_B_INIT:
1461 abx500_chargalg_start_maintenance_timer(di,
1462 di->bat->bat_type[
1463 di->bat->batt_id].maint_b_chg_timer_h);
1464 abx500_chargalg_start_charging(di,
1465 di->bat->bat_type[
1466 di->bat->batt_id].maint_b_vol_lvl,
1467 di->bat->bat_type[
1468 di->bat->batt_id].maint_b_cur_lvl);
1469 abx500_chargalg_state_to(di, STATE_MAINTENANCE_B);
1470 power_supply_changed(&di->chargalg_psy);
1471 /* Intentional fallthrough*/
1472
1473 case STATE_MAINTENANCE_B:
1474 if (di->events.maintenance_timer_expired) {
1475 abx500_chargalg_stop_maintenance_timer(di);
1476 abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
1477 }
1478 break;
1479
1480 case STATE_TEMP_LOWHIGH_INIT:
1481 abx500_chargalg_start_charging(di,
1482 di->bat->bat_type[
1483 di->bat->batt_id].low_high_vol_lvl,
1484 di->bat->bat_type[
1485 di->bat->batt_id].low_high_cur_lvl);
1486 abx500_chargalg_stop_maintenance_timer(di);
1487 di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
1488 abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH);
1489 power_supply_changed(&di->chargalg_psy);
1490 /* Intentional fallthrough */
1491
1492 case STATE_TEMP_LOWHIGH:
1493 if (!di->events.btemp_lowhigh)
1494 abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
1495 break;
1496
1497 case STATE_WD_EXPIRED_INIT:
1498 abx500_chargalg_stop_charging(di);
1499 abx500_chargalg_state_to(di, STATE_WD_EXPIRED);
1500 /* Intentional fallthrough */
1501
1502 case STATE_WD_EXPIRED:
1503 if (!di->events.ac_wd_expired &&
1504 !di->events.usb_wd_expired)
1505 abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
1506 break;
1507
1508 case STATE_TEMP_UNDEROVER_INIT:
1509 abx500_chargalg_stop_charging(di);
1510 abx500_chargalg_state_to(di, STATE_TEMP_UNDEROVER);
1511 /* Intentional fallthrough */
1512
1513 case STATE_TEMP_UNDEROVER:
1514 if (!di->events.btemp_underover)
1515 abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
1516 break;
1517 }
1518
1519 /* Start charging directly if the new state is a charge state */
1520 if (di->charge_state == STATE_NORMAL_INIT ||
1521 di->charge_state == STATE_MAINTENANCE_A_INIT ||
1522 di->charge_state == STATE_MAINTENANCE_B_INIT)
1523 queue_work(di->chargalg_wq, &di->chargalg_work);
1524}
1525
1526/**
1527 * abx500_chargalg_periodic_work() - Periodic work for the algorithm
1528 * @work: pointer to the work_struct structure
1529 *
1530 * Work queue function for the charging algorithm
1531 */
1532static void abx500_chargalg_periodic_work(struct work_struct *work)
1533{
1534 struct abx500_chargalg *di = container_of(work,
1535 struct abx500_chargalg, chargalg_periodic_work.work);
1536
1537 abx500_chargalg_algorithm(di);
1538
1539 /*
1540 * If a charger is connected then the battery has to be monitored
1541 * frequently, else the work can be delayed.
1542 */
1543 if (di->chg_info.conn_chg)
1544 queue_delayed_work(di->chargalg_wq,
1545 &di->chargalg_periodic_work,
1546 di->bat->interval_charging * HZ);
1547 else
1548 queue_delayed_work(di->chargalg_wq,
1549 &di->chargalg_periodic_work,
1550 di->bat->interval_not_charging * HZ);
1551}
1552
1553/**
1554 * abx500_chargalg_wd_work() - periodic work to kick the charger watchdog
1555 * @work: pointer to the work_struct structure
1556 *
1557 * Work queue function for kicking the charger watchdog
1558 */
1559static void abx500_chargalg_wd_work(struct work_struct *work)
1560{
1561 int ret;
1562 struct abx500_chargalg *di = container_of(work,
1563 struct abx500_chargalg, chargalg_wd_work.work);
1564
1565 dev_dbg(di->dev, "abx500_chargalg_wd_work\n");
1566
1567 ret = abx500_chargalg_kick_watchdog(di);
1568 if (ret < 0)
1569 dev_err(di->dev, "failed to kick watchdog\n");
1570
1571 queue_delayed_work(di->chargalg_wq,
1572 &di->chargalg_wd_work, CHG_WD_INTERVAL);
1573}
1574
1575/**
1576 * abx500_chargalg_work() - Work to run the charging algorithm instantly
1577 * @work: pointer to the work_struct structure
1578 *
1579 * Work queue function for calling the charging algorithm
1580 */
1581static void abx500_chargalg_work(struct work_struct *work)
1582{
1583 struct abx500_chargalg *di = container_of(work,
1584 struct abx500_chargalg, chargalg_work);
1585
1586 abx500_chargalg_algorithm(di);
1587}
1588
1589/**
1590 * abx500_chargalg_get_property() - get the chargalg properties
1591 * @psy: pointer to the power_supply structure
1592 * @psp: pointer to the power_supply_property structure
1593 * @val: pointer to the power_supply_propval union
1594 *
1595 * This function gets called when an application tries to get the
1596 * chargalg properties by reading the sysfs files.
1597 * status: charging/discharging/full/unknown
1598 * health: health of the battery
1599 * Returns error code in case of failure else 0 on success
1600 */
1601static int abx500_chargalg_get_property(struct power_supply *psy,
1602 enum power_supply_property psp,
1603 union power_supply_propval *val)
1604{
1605 struct abx500_chargalg *di;
1606
1607 di = to_abx500_chargalg_device_info(psy);
1608
1609 switch (psp) {
1610 case POWER_SUPPLY_PROP_STATUS:
1611 val->intval = di->charge_status;
1612 break;
1613 case POWER_SUPPLY_PROP_HEALTH:
1614 if (di->events.batt_ovv) {
1615 val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
1616 } else if (di->events.btemp_underover) {
1617 if (di->batt_data.temp <= di->bat->temp_under)
1618 val->intval = POWER_SUPPLY_HEALTH_COLD;
1619 else
1620 val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
1621 } else {
1622 val->intval = POWER_SUPPLY_HEALTH_GOOD;
1623 }
1624 break;
1625 default:
1626 return -EINVAL;
1627 }
1628 return 0;
1629}
1630
1631/* Exposure to the sysfs interface */
1632
1633/**
1634 * abx500_chargalg_sysfs_charger() - sysfs store operations
1635 * @kobj: pointer to the struct kobject
1636 * @attr: pointer to the struct attribute
1637 * @buf: buffer that holds the parameter passed from userspace
1638 * @length: length of the parameter passed
1639 *
1640 * Returns length of the buffer(input taken from user space) on success
1641 * else error code on failure
1642 * The operation to be performed on passing the parameters from the user space.
1643 */
1644static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj,
1645 struct attribute *attr, const char *buf, size_t length)
1646{
1647 struct abx500_chargalg *di = container_of(kobj,
1648 struct abx500_chargalg, chargalg_kobject);
1649 long int param;
1650 int ac_usb;
1651 int ret;
1652 char entry = *attr->name;
1653
1654 switch (entry) {
1655 case 'c':
1656 ret = strict_strtol(buf, 10, &param);
1657 if (ret < 0)
1658 return ret;
1659
1660 ac_usb = param;
1661 switch (ac_usb) {
1662 case 0:
1663 /* Disable charging */
1664 di->susp_status.ac_suspended = true;
1665 di->susp_status.usb_suspended = true;
1666 di->susp_status.suspended_change = true;
1667 /* Trigger a state change */
1668 queue_work(di->chargalg_wq,
1669 &di->chargalg_work);
1670 break;
1671 case 1:
1672 /* Enable AC Charging */
1673 di->susp_status.ac_suspended = false;
1674 di->susp_status.suspended_change = true;
1675 /* Trigger a state change */
1676 queue_work(di->chargalg_wq,
1677 &di->chargalg_work);
1678 break;
1679 case 2:
1680 /* Enable USB charging */
1681 di->susp_status.usb_suspended = false;
1682 di->susp_status.suspended_change = true;
1683 /* Trigger a state change */
1684 queue_work(di->chargalg_wq,
1685 &di->chargalg_work);
1686 break;
1687 default:
1688 dev_info(di->dev, "Wrong input\n"
1689 "Enter 0. Disable AC/USB Charging\n"
1690 "1. Enable AC charging\n"
1691 "2. Enable USB Charging\n");
1692 };
1693 break;
1694 };
1695 return strlen(buf);
1696}
1697
1698static struct attribute abx500_chargalg_en_charger = \
1699{
1700 .name = "chargalg",
1701 .mode = S_IWUGO,
1702};
1703
1704static struct attribute *abx500_chargalg_chg[] = {
1705 &abx500_chargalg_en_charger,
1706 NULL
1707};
1708
Anton Vorontsov64eb9b02012-03-14 04:43:11 +04001709static const struct sysfs_ops abx500_chargalg_sysfs_ops = {
Arun Murthy1668f812012-02-29 21:54:25 +05301710 .store = abx500_chargalg_sysfs_charger,
1711};
1712
1713static struct kobj_type abx500_chargalg_ktype = {
1714 .sysfs_ops = &abx500_chargalg_sysfs_ops,
1715 .default_attrs = abx500_chargalg_chg,
1716};
1717
1718/**
1719 * abx500_chargalg_sysfs_exit() - de-init of sysfs entry
1720 * @di: pointer to the struct abx500_chargalg
1721 *
1722 * This function removes the entry in sysfs.
1723 */
1724static void abx500_chargalg_sysfs_exit(struct abx500_chargalg *di)
1725{
1726 kobject_del(&di->chargalg_kobject);
1727}
1728
1729/**
1730 * abx500_chargalg_sysfs_init() - init of sysfs entry
1731 * @di: pointer to the struct abx500_chargalg
1732 *
1733 * This function adds an entry in sysfs.
1734 * Returns error code in case of failure else 0(on success)
1735 */
1736static int abx500_chargalg_sysfs_init(struct abx500_chargalg *di)
1737{
1738 int ret = 0;
1739
1740 ret = kobject_init_and_add(&di->chargalg_kobject,
1741 &abx500_chargalg_ktype,
1742 NULL, "abx500_chargalg");
1743 if (ret < 0)
1744 dev_err(di->dev, "failed to create sysfs entry\n");
1745
1746 return ret;
1747}
1748/* Exposure to the sysfs interface <<END>> */
1749
1750#if defined(CONFIG_PM)
1751static int abx500_chargalg_resume(struct platform_device *pdev)
1752{
1753 struct abx500_chargalg *di = platform_get_drvdata(pdev);
1754
1755 /* Kick charger watchdog if charging (any charger online) */
1756 if (di->chg_info.online_chg)
1757 queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0);
1758
1759 /*
1760 * Run the charging algorithm directly to be sure we don't
1761 * do it too seldom
1762 */
1763 queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
1764
1765 return 0;
1766}
1767
1768static int abx500_chargalg_suspend(struct platform_device *pdev,
1769 pm_message_t state)
1770{
1771 struct abx500_chargalg *di = platform_get_drvdata(pdev);
1772
1773 if (di->chg_info.online_chg)
1774 cancel_delayed_work_sync(&di->chargalg_wd_work);
1775
1776 cancel_delayed_work_sync(&di->chargalg_periodic_work);
1777
1778 return 0;
1779}
1780#else
1781#define abx500_chargalg_suspend NULL
1782#define abx500_chargalg_resume NULL
1783#endif
1784
1785static int __devexit abx500_chargalg_remove(struct platform_device *pdev)
1786{
1787 struct abx500_chargalg *di = platform_get_drvdata(pdev);
1788
1789 /* sysfs interface to enable/disbale charging from user space */
1790 abx500_chargalg_sysfs_exit(di);
1791
1792 /* Delete the work queue */
1793 destroy_workqueue(di->chargalg_wq);
1794
1795 flush_scheduled_work();
1796 power_supply_unregister(&di->chargalg_psy);
1797 platform_set_drvdata(pdev, NULL);
1798 kfree(di);
1799
1800 return 0;
1801}
1802
1803static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
1804{
1805 struct abx500_bm_plat_data *plat_data;
1806 int ret = 0;
1807
1808 struct abx500_chargalg *di =
1809 kzalloc(sizeof(struct abx500_chargalg), GFP_KERNEL);
1810 if (!di)
1811 return -ENOMEM;
1812
1813 /* get device struct */
1814 di->dev = &pdev->dev;
1815
1816 plat_data = pdev->dev.platform_data;
1817 di->pdata = plat_data->chargalg;
1818 di->bat = plat_data->battery;
1819
1820 /* chargalg supply */
1821 di->chargalg_psy.name = "abx500_chargalg";
1822 di->chargalg_psy.type = POWER_SUPPLY_TYPE_BATTERY;
1823 di->chargalg_psy.properties = abx500_chargalg_props;
1824 di->chargalg_psy.num_properties = ARRAY_SIZE(abx500_chargalg_props);
1825 di->chargalg_psy.get_property = abx500_chargalg_get_property;
1826 di->chargalg_psy.supplied_to = di->pdata->supplied_to;
1827 di->chargalg_psy.num_supplicants = di->pdata->num_supplicants;
1828 di->chargalg_psy.external_power_changed =
1829 abx500_chargalg_external_power_changed;
1830
1831 /* Initilialize safety timer */
1832 init_timer(&di->safety_timer);
1833 di->safety_timer.function = abx500_chargalg_safety_timer_expired;
1834 di->safety_timer.data = (unsigned long) di;
1835
1836 /* Initilialize maintenance timer */
1837 init_timer(&di->maintenance_timer);
1838 di->maintenance_timer.function =
1839 abx500_chargalg_maintenance_timer_expired;
1840 di->maintenance_timer.data = (unsigned long) di;
1841
1842 /* Create a work queue for the chargalg */
1843 di->chargalg_wq =
1844 create_singlethread_workqueue("abx500_chargalg_wq");
1845 if (di->chargalg_wq == NULL) {
1846 dev_err(di->dev, "failed to create work queue\n");
1847 goto free_device_info;
1848 }
1849
1850 /* Init work for chargalg */
1851 INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_periodic_work,
1852 abx500_chargalg_periodic_work);
1853 INIT_DELAYED_WORK_DEFERRABLE(&di->chargalg_wd_work,
1854 abx500_chargalg_wd_work);
1855
1856 /* Init work for chargalg */
1857 INIT_WORK(&di->chargalg_work, abx500_chargalg_work);
1858
1859 /* To detect charger at startup */
1860 di->chg_info.prev_conn_chg = -1;
1861
1862 /* Register chargalg power supply class */
1863 ret = power_supply_register(di->dev, &di->chargalg_psy);
1864 if (ret) {
1865 dev_err(di->dev, "failed to register chargalg psy\n");
1866 goto free_chargalg_wq;
1867 }
1868
1869 platform_set_drvdata(pdev, di);
1870
1871 /* sysfs interface to enable/disable charging from user space */
1872 ret = abx500_chargalg_sysfs_init(di);
1873 if (ret) {
1874 dev_err(di->dev, "failed to create sysfs entry\n");
1875 goto free_psy;
1876 }
1877
1878 /* Run the charging algorithm */
1879 queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
1880
1881 dev_info(di->dev, "probe success\n");
1882 return ret;
1883
1884free_psy:
1885 power_supply_unregister(&di->chargalg_psy);
1886free_chargalg_wq:
1887 destroy_workqueue(di->chargalg_wq);
1888free_device_info:
1889 kfree(di);
1890
1891 return ret;
1892}
1893
1894static struct platform_driver abx500_chargalg_driver = {
1895 .probe = abx500_chargalg_probe,
1896 .remove = __devexit_p(abx500_chargalg_remove),
1897 .suspend = abx500_chargalg_suspend,
1898 .resume = abx500_chargalg_resume,
1899 .driver = {
1900 .name = "abx500-chargalg",
1901 .owner = THIS_MODULE,
1902 },
1903};
1904
1905static int __init abx500_chargalg_init(void)
1906{
1907 return platform_driver_register(&abx500_chargalg_driver);
1908}
1909
1910static void __exit abx500_chargalg_exit(void)
1911{
1912 platform_driver_unregister(&abx500_chargalg_driver);
1913}
1914
1915module_init(abx500_chargalg_init);
1916module_exit(abx500_chargalg_exit);
1917
1918MODULE_LICENSE("GPL v2");
1919MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
1920MODULE_ALIAS("platform:abx500-chargalg");
1921MODULE_DESCRIPTION("abx500 battery charging algorithm");