blob: 2c253d6d20bd1fec6b71d18347f27ef0126e3f5e [file] [log] [blame]
Sascha Hauer420127e2014-01-18 16:41:30 +08001/ {
2 regulators {
3 compatible = "simple-bus";
4 #address-cells = <1>;
5 #size-cells = <0>;
6
7 dummy_reg: regulator@0 {
8 compatible = "regulator-fixed";
9 reg = <0>;
10 regulator-name = "dummy-supply";
11 };
12
13 reg_usb_otg_vbus: regulator@1 {
14 compatible = "regulator-fixed";
15 reg = <1>;
16 regulator-name = "usb_otg_vbus";
17 regulator-min-microvolt = <5000000>;
18 regulator-max-microvolt = <5000000>;
19 gpio = <&gpio3 22 0>;
20 enable-active-high;
21 };
22 };
23
24 chosen {
Sascha Hauer48f51962014-05-07 15:19:00 +020025 stdout-path = &uart1;
Sascha Hauer420127e2014-01-18 16:41:30 +080026 };
27};
28
29&ecspi3 {
30 fsl,spi-num-chipselects = <1>;
31 cs-gpios = <&gpio4 24 0>;
32 pinctrl-names = "default";
33 pinctrl-0 = <&pinctrl_ecspi3>;
34 status = "okay";
35
36 flash: m25p80@0 {
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "sst,sst25vf040b", "m25p80";
40 spi-max-frequency = <20000000>;
41 reg = <0>;
42 };
43};
44
45&fec {
46 pinctrl-names = "default";
47 pinctrl-0 = <&pinctrl_enet>;
48 status = "okay";
49 phy-mode = "rgmii";
50};
51
52&iomuxc {
53 pinctrl-names = "default";
54 pinctrl-0 = <&pinctrl_hog>;
55
56 imx6qdl-dfi-fs700-m60 {
57 pinctrl_hog: hoggrp {
58 fsl,pins = <
59 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
60 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
61 MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
62 MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
63 >;
64 };
65
66 pinctrl_enet: enetgrp {
67 fsl,pins = <
68 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
69 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
70 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
71 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
72 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
73 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
74 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
75 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
76 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
77 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
78 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
79 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
80 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
81 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
82 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
83 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
84 >;
85 };
86
87 pinctrl_i2c2: i2c2grp {
88 fsl,pins = <
89 MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
90 MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
91 >;
92 };
93
94 pinctrl_uart1: uart1grp {
95 fsl,pins = <
96 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
97 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
98 >;
99 };
100
101 pinctrl_usbotg: usbotggrp {
102 fsl,pins = <
103 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
104 >;
105 };
106
107 pinctrl_usdhc2: usdhc2grp {
108 fsl,pins = <
109 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
110 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
111 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
112 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
113 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
114 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
115 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
116 >;
117 };
118
119 pinctrl_usdhc3: usdhc3grp {
120 fsl,pins = <
121 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
122 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
123 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
124 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
125 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
126 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
127 >;
128 };
129
130 pinctrl_usdhc4: usdhc4grp {
131 fsl,pins = <
132 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
133 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
134 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
135 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
136 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
137 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
138 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
139 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
140 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
141 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
142 >;
143 };
144
145 pinctrl_ecspi3: ecspi3grp {
146 fsl,pins = <
147 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
148 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
149 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
150 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
151 >;
152 };
153 };
154};
155
156&i2c2 {
157 pinctrl-names = "default";
158 pinctrl-0 = <&pinctrl_i2c2>;
159 status = "okay";
160};
161
162&uart1 {
163 pinctrl-names = "default";
164 pinctrl-0 = <&pinctrl_uart1>;
165 status = "okay";
166};
167
168&usbh1 {
169 status = "okay";
170};
171
172&usbotg {
173 vbus-supply = <&reg_usb_otg_vbus>;
174 pinctrl-names = "default";
175 pinctrl-0 = <&pinctrl_usbotg>;
176 disable-over-current;
177 dr_mode = "host";
178 status = "okay";
179};
180
181&usdhc2 { /* module slot */
182 pinctrl-names = "default";
183 pinctrl-0 = <&pinctrl_usdhc2>;
184 cd-gpios = <&gpio2 2 0>;
185 status = "okay";
186};
187
188&usdhc3 { /* baseboard slot */
189 pinctrl-names = "default";
190 pinctrl-0 = <&pinctrl_usdhc3>;
191};
192
193&usdhc4 { /* eMMC */
194 pinctrl-names = "default";
195 pinctrl-0 = <&pinctrl_usdhc4>;
196 bus-width = <8>;
197 non-removable;
198 status = "okay";
199};