Dave Airlie | f9aa76a | 2012-04-17 14:12:29 +0100 | [diff] [blame] | 1 | |
| 2 | /* |
| 3 | * Copyright 2012 Red Hat |
| 4 | * |
| 5 | * This file is subject to the terms and conditions of the GNU General |
| 6 | * Public License version 2. See the file COPYING in the main |
| 7 | * directory of this archive for more details. |
| 8 | * |
| 9 | * Authors: Matthew Garrett |
| 10 | * Dave Airlie |
| 11 | * |
| 12 | * Portions of this code derived from cirrusfb.c: |
| 13 | * drivers/video/cirrusfb.c - driver for Cirrus Logic chipsets |
| 14 | * |
| 15 | * Copyright 1999-2001 Jeff Garzik <jgarzik@pobox.com> |
| 16 | */ |
David Howells | 760285e | 2012-10-02 18:01:07 +0100 | [diff] [blame] | 17 | #include <drm/drmP.h> |
| 18 | #include <drm/drm_crtc_helper.h> |
Dave Airlie | f9aa76a | 2012-04-17 14:12:29 +0100 | [diff] [blame] | 19 | |
| 20 | #include <video/cirrus.h> |
| 21 | |
| 22 | #include "cirrus_drv.h" |
| 23 | |
| 24 | #define CIRRUS_LUT_SIZE 256 |
| 25 | |
| 26 | #define PALETTE_INDEX 0x8 |
| 27 | #define PALETTE_DATA 0x9 |
| 28 | |
| 29 | /* |
| 30 | * This file contains setup code for the CRTC. |
| 31 | */ |
| 32 | |
| 33 | static void cirrus_crtc_load_lut(struct drm_crtc *crtc) |
| 34 | { |
| 35 | struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc); |
| 36 | struct drm_device *dev = crtc->dev; |
| 37 | struct cirrus_device *cdev = dev->dev_private; |
| 38 | int i; |
| 39 | |
| 40 | if (!crtc->enabled) |
| 41 | return; |
| 42 | |
| 43 | for (i = 0; i < CIRRUS_LUT_SIZE; i++) { |
| 44 | /* VGA registers */ |
| 45 | WREG8(PALETTE_INDEX, i); |
| 46 | WREG8(PALETTE_DATA, cirrus_crtc->lut_r[i]); |
| 47 | WREG8(PALETTE_DATA, cirrus_crtc->lut_g[i]); |
| 48 | WREG8(PALETTE_DATA, cirrus_crtc->lut_b[i]); |
| 49 | } |
| 50 | } |
| 51 | |
| 52 | /* |
| 53 | * The DRM core requires DPMS functions, but they make little sense in our |
| 54 | * case and so are just stubs |
| 55 | */ |
| 56 | |
| 57 | static void cirrus_crtc_dpms(struct drm_crtc *crtc, int mode) |
| 58 | { |
| 59 | struct drm_device *dev = crtc->dev; |
| 60 | struct cirrus_device *cdev = dev->dev_private; |
| 61 | u8 sr01, gr0e; |
| 62 | |
| 63 | switch (mode) { |
| 64 | case DRM_MODE_DPMS_ON: |
| 65 | sr01 = 0x00; |
| 66 | gr0e = 0x00; |
| 67 | break; |
| 68 | case DRM_MODE_DPMS_STANDBY: |
| 69 | sr01 = 0x20; |
| 70 | gr0e = 0x02; |
| 71 | break; |
| 72 | case DRM_MODE_DPMS_SUSPEND: |
| 73 | sr01 = 0x20; |
| 74 | gr0e = 0x04; |
| 75 | break; |
| 76 | case DRM_MODE_DPMS_OFF: |
| 77 | sr01 = 0x20; |
| 78 | gr0e = 0x06; |
| 79 | break; |
| 80 | default: |
| 81 | return; |
| 82 | } |
| 83 | |
| 84 | WREG8(SEQ_INDEX, 0x1); |
| 85 | sr01 |= RREG8(SEQ_DATA) & ~0x20; |
| 86 | WREG_SEQ(0x1, sr01); |
| 87 | |
| 88 | WREG8(GFX_INDEX, 0xe); |
| 89 | gr0e |= RREG8(GFX_DATA) & ~0x06; |
| 90 | WREG_GFX(0xe, gr0e); |
| 91 | } |
| 92 | |
| 93 | /* |
| 94 | * The core passes the desired mode to the CRTC code to see whether any |
| 95 | * CRTC-specific modifications need to be made to it. We're in a position |
| 96 | * to just pass that straight through, so this does nothing |
| 97 | */ |
| 98 | static bool cirrus_crtc_mode_fixup(struct drm_crtc *crtc, |
Laurent Pinchart | e811f5a | 2012-07-17 17:56:50 +0200 | [diff] [blame] | 99 | const struct drm_display_mode *mode, |
Dave Airlie | f9aa76a | 2012-04-17 14:12:29 +0100 | [diff] [blame] | 100 | struct drm_display_mode *adjusted_mode) |
| 101 | { |
| 102 | return true; |
| 103 | } |
| 104 | |
Rashika | 5e89440 | 2014-01-06 20:30:14 +0530 | [diff] [blame] | 105 | static void cirrus_set_start_address(struct drm_crtc *crtc, unsigned offset) |
Dave Airlie | f9aa76a | 2012-04-17 14:12:29 +0100 | [diff] [blame] | 106 | { |
| 107 | struct cirrus_device *cdev = crtc->dev->dev_private; |
| 108 | u32 addr; |
| 109 | u8 tmp; |
| 110 | |
| 111 | addr = offset >> 2; |
| 112 | WREG_CRT(0x0c, (u8)((addr >> 8) & 0xff)); |
| 113 | WREG_CRT(0x0d, (u8)(addr & 0xff)); |
| 114 | |
| 115 | WREG8(CRT_INDEX, 0x1b); |
| 116 | tmp = RREG8(CRT_DATA); |
| 117 | tmp &= 0xf2; |
| 118 | tmp |= (addr >> 16) & 0x01; |
| 119 | tmp |= (addr >> 15) & 0x0c; |
| 120 | WREG_CRT(0x1b, tmp); |
| 121 | WREG8(CRT_INDEX, 0x1d); |
| 122 | tmp = RREG8(CRT_DATA); |
| 123 | tmp &= 0x7f; |
| 124 | tmp |= (addr >> 12) & 0x80; |
| 125 | WREG_CRT(0x1d, tmp); |
| 126 | } |
| 127 | |
| 128 | /* cirrus is different - we will force move buffers out of VRAM */ |
| 129 | static int cirrus_crtc_do_set_base(struct drm_crtc *crtc, |
| 130 | struct drm_framebuffer *fb, |
| 131 | int x, int y, int atomic) |
| 132 | { |
| 133 | struct cirrus_device *cdev = crtc->dev->dev_private; |
| 134 | struct drm_gem_object *obj; |
| 135 | struct cirrus_framebuffer *cirrus_fb; |
| 136 | struct cirrus_bo *bo; |
| 137 | int ret; |
| 138 | u64 gpu_addr; |
| 139 | |
| 140 | /* push the previous fb to system ram */ |
| 141 | if (!atomic && fb) { |
| 142 | cirrus_fb = to_cirrus_framebuffer(fb); |
| 143 | obj = cirrus_fb->obj; |
| 144 | bo = gem_to_cirrus_bo(obj); |
| 145 | ret = cirrus_bo_reserve(bo, false); |
| 146 | if (ret) |
| 147 | return ret; |
| 148 | cirrus_bo_push_sysram(bo); |
| 149 | cirrus_bo_unreserve(bo); |
| 150 | } |
| 151 | |
| 152 | cirrus_fb = to_cirrus_framebuffer(crtc->fb); |
| 153 | obj = cirrus_fb->obj; |
| 154 | bo = gem_to_cirrus_bo(obj); |
| 155 | |
| 156 | ret = cirrus_bo_reserve(bo, false); |
| 157 | if (ret) |
| 158 | return ret; |
| 159 | |
| 160 | ret = cirrus_bo_pin(bo, TTM_PL_FLAG_VRAM, &gpu_addr); |
| 161 | if (ret) { |
| 162 | cirrus_bo_unreserve(bo); |
| 163 | return ret; |
| 164 | } |
| 165 | |
| 166 | if (&cdev->mode_info.gfbdev->gfb == cirrus_fb) { |
| 167 | /* if pushing console in kmap it */ |
| 168 | ret = ttm_bo_kmap(&bo->bo, 0, bo->bo.num_pages, &bo->kmap); |
| 169 | if (ret) |
| 170 | DRM_ERROR("failed to kmap fbcon\n"); |
| 171 | } |
| 172 | cirrus_bo_unreserve(bo); |
| 173 | |
| 174 | cirrus_set_start_address(crtc, (u32)gpu_addr); |
| 175 | return 0; |
| 176 | } |
| 177 | |
| 178 | static int cirrus_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, |
| 179 | struct drm_framebuffer *old_fb) |
| 180 | { |
| 181 | return cirrus_crtc_do_set_base(crtc, old_fb, x, y, 0); |
| 182 | } |
| 183 | |
| 184 | /* |
| 185 | * The meat of this driver. The core passes us a mode and we have to program |
| 186 | * it. The modesetting here is the bare minimum required to satisfy the qemu |
| 187 | * emulation of this hardware, and running this against a real device is |
| 188 | * likely to result in an inadequately programmed mode. We've already had |
| 189 | * the opportunity to modify the mode, so whatever we receive here should |
| 190 | * be something that can be correctly programmed and displayed |
| 191 | */ |
| 192 | static int cirrus_crtc_mode_set(struct drm_crtc *crtc, |
| 193 | struct drm_display_mode *mode, |
| 194 | struct drm_display_mode *adjusted_mode, |
| 195 | int x, int y, struct drm_framebuffer *old_fb) |
| 196 | { |
| 197 | struct drm_device *dev = crtc->dev; |
| 198 | struct cirrus_device *cdev = dev->dev_private; |
| 199 | int hsyncstart, hsyncend, htotal, hdispend; |
| 200 | int vtotal, vdispend; |
| 201 | int tmp; |
| 202 | int sr07 = 0, hdr = 0; |
| 203 | |
| 204 | htotal = mode->htotal / 8; |
| 205 | hsyncend = mode->hsync_end / 8; |
| 206 | hsyncstart = mode->hsync_start / 8; |
| 207 | hdispend = mode->hdisplay / 8; |
| 208 | |
| 209 | vtotal = mode->vtotal; |
| 210 | vdispend = mode->vdisplay; |
| 211 | |
| 212 | vdispend -= 1; |
| 213 | vtotal -= 2; |
| 214 | |
| 215 | htotal -= 5; |
| 216 | hdispend -= 1; |
| 217 | hsyncstart += 1; |
| 218 | hsyncend += 1; |
| 219 | |
| 220 | WREG_CRT(VGA_CRTC_V_SYNC_END, 0x20); |
| 221 | WREG_CRT(VGA_CRTC_H_TOTAL, htotal); |
| 222 | WREG_CRT(VGA_CRTC_H_DISP, hdispend); |
| 223 | WREG_CRT(VGA_CRTC_H_SYNC_START, hsyncstart); |
| 224 | WREG_CRT(VGA_CRTC_H_SYNC_END, hsyncend); |
| 225 | WREG_CRT(VGA_CRTC_V_TOTAL, vtotal & 0xff); |
| 226 | WREG_CRT(VGA_CRTC_V_DISP_END, vdispend & 0xff); |
| 227 | |
| 228 | tmp = 0x40; |
| 229 | if ((vdispend + 1) & 512) |
| 230 | tmp |= 0x20; |
| 231 | WREG_CRT(VGA_CRTC_MAX_SCAN, tmp); |
| 232 | |
| 233 | /* |
| 234 | * Overflow bits for values that don't fit in the standard registers |
| 235 | */ |
| 236 | tmp = 16; |
| 237 | if (vtotal & 256) |
| 238 | tmp |= 1; |
| 239 | if (vdispend & 256) |
| 240 | tmp |= 2; |
| 241 | if ((vdispend + 1) & 256) |
| 242 | tmp |= 8; |
| 243 | if (vtotal & 512) |
| 244 | tmp |= 32; |
| 245 | if (vdispend & 512) |
| 246 | tmp |= 64; |
| 247 | WREG_CRT(VGA_CRTC_OVERFLOW, tmp); |
| 248 | |
| 249 | tmp = 0; |
| 250 | |
| 251 | /* More overflow bits */ |
| 252 | |
| 253 | if ((htotal + 5) & 64) |
| 254 | tmp |= 16; |
| 255 | if ((htotal + 5) & 128) |
| 256 | tmp |= 32; |
| 257 | if (vtotal & 256) |
| 258 | tmp |= 64; |
| 259 | if (vtotal & 512) |
| 260 | tmp |= 128; |
| 261 | |
| 262 | WREG_CRT(CL_CRT1A, tmp); |
| 263 | |
| 264 | /* Disable Hercules/CGA compatibility */ |
| 265 | WREG_CRT(VGA_CRTC_MODE, 0x03); |
| 266 | |
| 267 | WREG8(SEQ_INDEX, 0x7); |
| 268 | sr07 = RREG8(SEQ_DATA); |
| 269 | sr07 &= 0xe0; |
| 270 | hdr = 0; |
| 271 | switch (crtc->fb->bits_per_pixel) { |
| 272 | case 8: |
| 273 | sr07 |= 0x11; |
| 274 | break; |
| 275 | case 16: |
Takashi Iwai | 2510538 | 2014-01-21 14:34:51 -0800 | [diff] [blame^] | 276 | sr07 |= 0x17; |
| 277 | hdr = 0xc1; |
Dave Airlie | f9aa76a | 2012-04-17 14:12:29 +0100 | [diff] [blame] | 278 | break; |
| 279 | case 24: |
| 280 | sr07 |= 0x15; |
| 281 | hdr = 0xc5; |
| 282 | break; |
| 283 | case 32: |
| 284 | sr07 |= 0x19; |
| 285 | hdr = 0xc5; |
| 286 | break; |
| 287 | default: |
| 288 | return -1; |
| 289 | } |
| 290 | |
| 291 | WREG_SEQ(0x7, sr07); |
| 292 | |
| 293 | /* Program the pitch */ |
| 294 | tmp = crtc->fb->pitches[0] / 8; |
| 295 | WREG_CRT(VGA_CRTC_OFFSET, tmp); |
| 296 | |
| 297 | /* Enable extended blanking and pitch bits, and enable full memory */ |
| 298 | tmp = 0x22; |
| 299 | tmp |= (crtc->fb->pitches[0] >> 7) & 0x10; |
| 300 | tmp |= (crtc->fb->pitches[0] >> 6) & 0x40; |
| 301 | WREG_CRT(0x1b, tmp); |
| 302 | |
| 303 | /* Enable high-colour modes */ |
| 304 | WREG_GFX(VGA_GFX_MODE, 0x40); |
| 305 | |
| 306 | /* And set graphics mode */ |
| 307 | WREG_GFX(VGA_GFX_MISC, 0x01); |
| 308 | |
| 309 | WREG_HDR(hdr); |
| 310 | cirrus_crtc_do_set_base(crtc, old_fb, x, y, 0); |
| 311 | return 0; |
| 312 | } |
| 313 | |
| 314 | /* |
| 315 | * This is called before a mode is programmed. A typical use might be to |
| 316 | * enable DPMS during the programming to avoid seeing intermediate stages, |
| 317 | * but that's not relevant to us |
| 318 | */ |
| 319 | static void cirrus_crtc_prepare(struct drm_crtc *crtc) |
| 320 | { |
| 321 | } |
| 322 | |
| 323 | /* |
| 324 | * This is called after a mode is programmed. It should reverse anything done |
| 325 | * by the prepare function |
| 326 | */ |
| 327 | static void cirrus_crtc_commit(struct drm_crtc *crtc) |
| 328 | { |
| 329 | } |
| 330 | |
| 331 | /* |
| 332 | * The core can pass us a set of gamma values to program. We actually only |
| 333 | * use this for 8-bit mode so can't perform smooth fades on deeper modes, |
| 334 | * but it's a requirement that we provide the function |
| 335 | */ |
| 336 | static void cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, |
| 337 | u16 *blue, uint32_t start, uint32_t size) |
| 338 | { |
| 339 | struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc); |
| 340 | int i; |
| 341 | |
| 342 | if (size != CIRRUS_LUT_SIZE) |
| 343 | return; |
| 344 | |
| 345 | for (i = 0; i < CIRRUS_LUT_SIZE; i++) { |
| 346 | cirrus_crtc->lut_r[i] = red[i]; |
| 347 | cirrus_crtc->lut_g[i] = green[i]; |
| 348 | cirrus_crtc->lut_b[i] = blue[i]; |
| 349 | } |
| 350 | cirrus_crtc_load_lut(crtc); |
| 351 | } |
| 352 | |
| 353 | /* Simple cleanup function */ |
| 354 | static void cirrus_crtc_destroy(struct drm_crtc *crtc) |
| 355 | { |
| 356 | struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc); |
| 357 | |
| 358 | drm_crtc_cleanup(crtc); |
| 359 | kfree(cirrus_crtc); |
| 360 | } |
| 361 | |
| 362 | /* These provide the minimum set of functions required to handle a CRTC */ |
| 363 | static const struct drm_crtc_funcs cirrus_crtc_funcs = { |
| 364 | .gamma_set = cirrus_crtc_gamma_set, |
| 365 | .set_config = drm_crtc_helper_set_config, |
| 366 | .destroy = cirrus_crtc_destroy, |
| 367 | }; |
| 368 | |
| 369 | static const struct drm_crtc_helper_funcs cirrus_helper_funcs = { |
| 370 | .dpms = cirrus_crtc_dpms, |
| 371 | .mode_fixup = cirrus_crtc_mode_fixup, |
| 372 | .mode_set = cirrus_crtc_mode_set, |
| 373 | .mode_set_base = cirrus_crtc_mode_set_base, |
| 374 | .prepare = cirrus_crtc_prepare, |
| 375 | .commit = cirrus_crtc_commit, |
| 376 | .load_lut = cirrus_crtc_load_lut, |
| 377 | }; |
| 378 | |
| 379 | /* CRTC setup */ |
| 380 | static void cirrus_crtc_init(struct drm_device *dev) |
| 381 | { |
| 382 | struct cirrus_device *cdev = dev->dev_private; |
| 383 | struct cirrus_crtc *cirrus_crtc; |
| 384 | int i; |
| 385 | |
| 386 | cirrus_crtc = kzalloc(sizeof(struct cirrus_crtc) + |
| 387 | (CIRRUSFB_CONN_LIMIT * sizeof(struct drm_connector *)), |
| 388 | GFP_KERNEL); |
| 389 | |
| 390 | if (cirrus_crtc == NULL) |
| 391 | return; |
| 392 | |
| 393 | drm_crtc_init(dev, &cirrus_crtc->base, &cirrus_crtc_funcs); |
| 394 | |
| 395 | drm_mode_crtc_set_gamma_size(&cirrus_crtc->base, CIRRUS_LUT_SIZE); |
| 396 | cdev->mode_info.crtc = cirrus_crtc; |
| 397 | |
| 398 | for (i = 0; i < CIRRUS_LUT_SIZE; i++) { |
| 399 | cirrus_crtc->lut_r[i] = i; |
| 400 | cirrus_crtc->lut_g[i] = i; |
| 401 | cirrus_crtc->lut_b[i] = i; |
| 402 | } |
| 403 | |
| 404 | drm_crtc_helper_add(&cirrus_crtc->base, &cirrus_helper_funcs); |
| 405 | } |
| 406 | |
| 407 | /** Sets the color ramps on behalf of fbcon */ |
| 408 | void cirrus_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, |
| 409 | u16 blue, int regno) |
| 410 | { |
| 411 | struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc); |
| 412 | |
| 413 | cirrus_crtc->lut_r[regno] = red; |
| 414 | cirrus_crtc->lut_g[regno] = green; |
| 415 | cirrus_crtc->lut_b[regno] = blue; |
| 416 | } |
| 417 | |
| 418 | /** Gets the color ramps on behalf of fbcon */ |
| 419 | void cirrus_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green, |
| 420 | u16 *blue, int regno) |
| 421 | { |
| 422 | struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc); |
| 423 | |
| 424 | *red = cirrus_crtc->lut_r[regno]; |
| 425 | *green = cirrus_crtc->lut_g[regno]; |
| 426 | *blue = cirrus_crtc->lut_b[regno]; |
| 427 | } |
| 428 | |
| 429 | |
| 430 | static bool cirrus_encoder_mode_fixup(struct drm_encoder *encoder, |
Laurent Pinchart | e811f5a | 2012-07-17 17:56:50 +0200 | [diff] [blame] | 431 | const struct drm_display_mode *mode, |
| 432 | struct drm_display_mode *adjusted_mode) |
Dave Airlie | f9aa76a | 2012-04-17 14:12:29 +0100 | [diff] [blame] | 433 | { |
| 434 | return true; |
| 435 | } |
| 436 | |
| 437 | static void cirrus_encoder_mode_set(struct drm_encoder *encoder, |
| 438 | struct drm_display_mode *mode, |
| 439 | struct drm_display_mode *adjusted_mode) |
| 440 | { |
| 441 | } |
| 442 | |
| 443 | static void cirrus_encoder_dpms(struct drm_encoder *encoder, int state) |
| 444 | { |
| 445 | return; |
| 446 | } |
| 447 | |
| 448 | static void cirrus_encoder_prepare(struct drm_encoder *encoder) |
| 449 | { |
| 450 | } |
| 451 | |
| 452 | static void cirrus_encoder_commit(struct drm_encoder *encoder) |
| 453 | { |
| 454 | } |
| 455 | |
Rashika | 5e89440 | 2014-01-06 20:30:14 +0530 | [diff] [blame] | 456 | static void cirrus_encoder_destroy(struct drm_encoder *encoder) |
Dave Airlie | f9aa76a | 2012-04-17 14:12:29 +0100 | [diff] [blame] | 457 | { |
| 458 | struct cirrus_encoder *cirrus_encoder = to_cirrus_encoder(encoder); |
| 459 | drm_encoder_cleanup(encoder); |
| 460 | kfree(cirrus_encoder); |
| 461 | } |
| 462 | |
| 463 | static const struct drm_encoder_helper_funcs cirrus_encoder_helper_funcs = { |
| 464 | .dpms = cirrus_encoder_dpms, |
| 465 | .mode_fixup = cirrus_encoder_mode_fixup, |
| 466 | .mode_set = cirrus_encoder_mode_set, |
| 467 | .prepare = cirrus_encoder_prepare, |
| 468 | .commit = cirrus_encoder_commit, |
| 469 | }; |
| 470 | |
| 471 | static const struct drm_encoder_funcs cirrus_encoder_encoder_funcs = { |
| 472 | .destroy = cirrus_encoder_destroy, |
| 473 | }; |
| 474 | |
| 475 | static struct drm_encoder *cirrus_encoder_init(struct drm_device *dev) |
| 476 | { |
| 477 | struct drm_encoder *encoder; |
| 478 | struct cirrus_encoder *cirrus_encoder; |
| 479 | |
| 480 | cirrus_encoder = kzalloc(sizeof(struct cirrus_encoder), GFP_KERNEL); |
| 481 | if (!cirrus_encoder) |
| 482 | return NULL; |
| 483 | |
| 484 | encoder = &cirrus_encoder->base; |
| 485 | encoder->possible_crtcs = 0x1; |
| 486 | |
| 487 | drm_encoder_init(dev, encoder, &cirrus_encoder_encoder_funcs, |
| 488 | DRM_MODE_ENCODER_DAC); |
| 489 | drm_encoder_helper_add(encoder, &cirrus_encoder_helper_funcs); |
| 490 | |
| 491 | return encoder; |
| 492 | } |
| 493 | |
| 494 | |
Rashika | 5e89440 | 2014-01-06 20:30:14 +0530 | [diff] [blame] | 495 | static int cirrus_vga_get_modes(struct drm_connector *connector) |
Dave Airlie | f9aa76a | 2012-04-17 14:12:29 +0100 | [diff] [blame] | 496 | { |
Gerd Hoffmann | 121a6a1 | 2013-10-11 10:01:09 +0200 | [diff] [blame] | 497 | int count; |
Dave Airlie | f9aa76a | 2012-04-17 14:12:29 +0100 | [diff] [blame] | 498 | |
Gerd Hoffmann | 121a6a1 | 2013-10-11 10:01:09 +0200 | [diff] [blame] | 499 | /* Just add a static list of modes */ |
| 500 | count = drm_add_modes_noedid(connector, 1280, 1024); |
| 501 | drm_set_preferred_mode(connector, 1024, 768); |
| 502 | return count; |
Dave Airlie | f9aa76a | 2012-04-17 14:12:29 +0100 | [diff] [blame] | 503 | } |
| 504 | |
| 505 | static int cirrus_vga_mode_valid(struct drm_connector *connector, |
| 506 | struct drm_display_mode *mode) |
| 507 | { |
| 508 | /* Any mode we've added is valid */ |
| 509 | return MODE_OK; |
| 510 | } |
| 511 | |
Rashika | 5e89440 | 2014-01-06 20:30:14 +0530 | [diff] [blame] | 512 | static struct drm_encoder *cirrus_connector_best_encoder(struct drm_connector |
Dave Airlie | f9aa76a | 2012-04-17 14:12:29 +0100 | [diff] [blame] | 513 | *connector) |
| 514 | { |
| 515 | int enc_id = connector->encoder_ids[0]; |
| 516 | struct drm_mode_object *obj; |
| 517 | struct drm_encoder *encoder; |
| 518 | |
| 519 | /* pick the encoder ids */ |
| 520 | if (enc_id) { |
| 521 | obj = |
| 522 | drm_mode_object_find(connector->dev, enc_id, |
| 523 | DRM_MODE_OBJECT_ENCODER); |
| 524 | if (!obj) |
| 525 | return NULL; |
| 526 | encoder = obj_to_encoder(obj); |
| 527 | return encoder; |
| 528 | } |
| 529 | return NULL; |
| 530 | } |
| 531 | |
| 532 | static enum drm_connector_status cirrus_vga_detect(struct drm_connector |
| 533 | *connector, bool force) |
| 534 | { |
| 535 | return connector_status_connected; |
| 536 | } |
| 537 | |
| 538 | static void cirrus_connector_destroy(struct drm_connector *connector) |
| 539 | { |
| 540 | drm_connector_cleanup(connector); |
| 541 | kfree(connector); |
| 542 | } |
| 543 | |
| 544 | struct drm_connector_helper_funcs cirrus_vga_connector_helper_funcs = { |
| 545 | .get_modes = cirrus_vga_get_modes, |
| 546 | .mode_valid = cirrus_vga_mode_valid, |
| 547 | .best_encoder = cirrus_connector_best_encoder, |
| 548 | }; |
| 549 | |
| 550 | struct drm_connector_funcs cirrus_vga_connector_funcs = { |
| 551 | .dpms = drm_helper_connector_dpms, |
| 552 | .detect = cirrus_vga_detect, |
| 553 | .fill_modes = drm_helper_probe_single_connector_modes, |
| 554 | .destroy = cirrus_connector_destroy, |
| 555 | }; |
| 556 | |
| 557 | static struct drm_connector *cirrus_vga_init(struct drm_device *dev) |
| 558 | { |
| 559 | struct drm_connector *connector; |
| 560 | struct cirrus_connector *cirrus_connector; |
| 561 | |
| 562 | cirrus_connector = kzalloc(sizeof(struct cirrus_connector), GFP_KERNEL); |
| 563 | if (!cirrus_connector) |
| 564 | return NULL; |
| 565 | |
| 566 | connector = &cirrus_connector->base; |
| 567 | |
| 568 | drm_connector_init(dev, connector, |
| 569 | &cirrus_vga_connector_funcs, DRM_MODE_CONNECTOR_VGA); |
| 570 | |
| 571 | drm_connector_helper_add(connector, &cirrus_vga_connector_helper_funcs); |
| 572 | |
| 573 | return connector; |
| 574 | } |
| 575 | |
| 576 | |
| 577 | int cirrus_modeset_init(struct cirrus_device *cdev) |
| 578 | { |
| 579 | struct drm_encoder *encoder; |
| 580 | struct drm_connector *connector; |
| 581 | int ret; |
| 582 | |
| 583 | drm_mode_config_init(cdev->dev); |
| 584 | cdev->mode_info.mode_config_initialized = true; |
| 585 | |
| 586 | cdev->dev->mode_config.max_width = CIRRUS_MAX_FB_WIDTH; |
| 587 | cdev->dev->mode_config.max_height = CIRRUS_MAX_FB_HEIGHT; |
| 588 | |
| 589 | cdev->dev->mode_config.fb_base = cdev->mc.vram_base; |
| 590 | cdev->dev->mode_config.preferred_depth = 24; |
| 591 | /* don't prefer a shadow on virt GPU */ |
| 592 | cdev->dev->mode_config.prefer_shadow = 0; |
| 593 | |
| 594 | cirrus_crtc_init(cdev->dev); |
| 595 | |
| 596 | encoder = cirrus_encoder_init(cdev->dev); |
| 597 | if (!encoder) { |
| 598 | DRM_ERROR("cirrus_encoder_init failed\n"); |
| 599 | return -1; |
| 600 | } |
| 601 | |
| 602 | connector = cirrus_vga_init(cdev->dev); |
| 603 | if (!connector) { |
| 604 | DRM_ERROR("cirrus_vga_init failed\n"); |
| 605 | return -1; |
| 606 | } |
| 607 | |
| 608 | drm_mode_connector_attach_encoder(connector, encoder); |
| 609 | |
| 610 | ret = cirrus_fbdev_init(cdev); |
| 611 | if (ret) { |
| 612 | DRM_ERROR("cirrus_fbdev_init failed\n"); |
| 613 | return ret; |
| 614 | } |
| 615 | |
| 616 | return 0; |
| 617 | } |
| 618 | |
| 619 | void cirrus_modeset_fini(struct cirrus_device *cdev) |
| 620 | { |
| 621 | cirrus_fbdev_fini(cdev); |
| 622 | |
| 623 | if (cdev->mode_info.mode_config_initialized) { |
| 624 | drm_mode_config_cleanup(cdev->dev); |
| 625 | cdev->mode_info.mode_config_initialized = false; |
| 626 | } |
| 627 | } |