blob: 6cb41607519dc0d83f6c5b1b8167ac99d7b8df10 [file] [log] [blame]
Samu Onkalo0efba162010-11-11 14:05:22 -08001/*
2 * lp5523.c - LP5523 LED Driver
3 *
4 * Copyright (C) 2010 Nokia Corporation
5 *
6 * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 *
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20 * 02110-1301 USA
21 */
22
23#include <linux/module.h>
24#include <linux/init.h>
25#include <linux/i2c.h>
26#include <linux/mutex.h>
27#include <linux/gpio.h>
28#include <linux/interrupt.h>
29#include <linux/delay.h>
30#include <linux/ctype.h>
31#include <linux/spinlock.h>
32#include <linux/wait.h>
33#include <linux/leds.h>
34#include <linux/leds-lp5523.h>
35#include <linux/workqueue.h>
36#include <linux/slab.h>
37
38#define LP5523_REG_ENABLE 0x00
39#define LP5523_REG_OP_MODE 0x01
40#define LP5523_REG_RATIOMETRIC_MSB 0x02
41#define LP5523_REG_RATIOMETRIC_LSB 0x03
42#define LP5523_REG_ENABLE_LEDS_MSB 0x04
43#define LP5523_REG_ENABLE_LEDS_LSB 0x05
44#define LP5523_REG_LED_CNTRL_BASE 0x06
45#define LP5523_REG_LED_PWM_BASE 0x16
46#define LP5523_REG_LED_CURRENT_BASE 0x26
47#define LP5523_REG_CONFIG 0x36
48#define LP5523_REG_CHANNEL1_PC 0x37
49#define LP5523_REG_CHANNEL2_PC 0x38
50#define LP5523_REG_CHANNEL3_PC 0x39
51#define LP5523_REG_STATUS 0x3a
52#define LP5523_REG_GPO 0x3b
53#define LP5523_REG_VARIABLE 0x3c
54#define LP5523_REG_RESET 0x3d
55#define LP5523_REG_TEMP_CTRL 0x3e
56#define LP5523_REG_TEMP_READ 0x3f
57#define LP5523_REG_TEMP_WRITE 0x40
58#define LP5523_REG_LED_TEST_CTRL 0x41
59#define LP5523_REG_LED_TEST_ADC 0x42
60#define LP5523_REG_ENG1_VARIABLE 0x45
61#define LP5523_REG_ENG2_VARIABLE 0x46
62#define LP5523_REG_ENG3_VARIABLE 0x47
63#define LP5523_REG_MASTER_FADER1 0x48
64#define LP5523_REG_MASTER_FADER2 0x49
65#define LP5523_REG_MASTER_FADER3 0x4a
66#define LP5523_REG_CH1_PROG_START 0x4c
67#define LP5523_REG_CH2_PROG_START 0x4d
68#define LP5523_REG_CH3_PROG_START 0x4e
69#define LP5523_REG_PROG_PAGE_SEL 0x4f
70#define LP5523_REG_PROG_MEM 0x50
71
72#define LP5523_CMD_LOAD 0x15 /* 00010101 */
73#define LP5523_CMD_RUN 0x2a /* 00101010 */
74#define LP5523_CMD_DISABLED 0x00 /* 00000000 */
75
76#define LP5523_ENABLE 0x40
77#define LP5523_AUTO_INC 0x40
78#define LP5523_PWR_SAVE 0x20
79#define LP5523_PWM_PWR_SAVE 0x04
80#define LP5523_CP_1 0x08
81#define LP5523_CP_1_5 0x10
82#define LP5523_CP_AUTO 0x18
83#define LP5523_INT_CLK 0x01
84#define LP5523_AUTO_CLK 0x02
85#define LP5523_EN_LEDTEST 0x80
86#define LP5523_LEDTEST_DONE 0x80
87
88#define LP5523_DEFAULT_CURRENT 50 /* microAmps */
89#define LP5523_PROGRAM_LENGTH 32 /* in bytes */
90#define LP5523_PROGRAM_PAGES 6
91#define LP5523_ADC_SHORTCIRC_LIM 80
92
93#define LP5523_LEDS 9
94#define LP5523_ENGINES 3
95
96#define LP5523_ENG_MASK_BASE 0x30 /* 00110000 */
97
98#define LP5523_ENG_STATUS_MASK 0x07 /* 00000111 */
99
100#define LP5523_IRQ_FLAGS IRQF_TRIGGER_FALLING
101
102#define LP5523_EXT_CLK_USED 0x08
103
104#define LED_ACTIVE(mux, led) (!!(mux & (0x0001 << led)))
105#define SHIFT_MASK(id) (((id) - 1) * 2)
106
107struct lp5523_engine {
108 const struct attribute_group *attributes;
109 int id;
110 u8 mode;
111 u8 prog_page;
112 u8 mux_page;
113 u16 led_mux;
114 u8 engine_mask;
115};
116
117struct lp5523_led {
118 int id;
119 u8 chan_nr;
120 u8 led_current;
121 u8 max_current;
122 struct led_classdev cdev;
123 struct work_struct brightness_work;
124 u8 brightness;
125};
126
127struct lp5523_chip {
128 struct mutex lock; /* Serialize control */
129 struct i2c_client *client;
130 struct lp5523_engine engines[LP5523_ENGINES];
131 struct lp5523_led leds[LP5523_LEDS];
132 struct lp5523_platform_data *pdata;
133 u8 num_channels;
134 u8 num_leds;
135};
136
Samu Onkalo87dbf622010-11-24 12:57:03 -0800137static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev)
138{
139 return container_of(cdev, struct lp5523_led, cdev);
140}
Samu Onkalo0efba162010-11-11 14:05:22 -0800141
Samu Onkalo87dbf622010-11-24 12:57:03 -0800142static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
Samu Onkalo0efba162010-11-11 14:05:22 -0800143{
144 return container_of(engine, struct lp5523_chip,
145 engines[engine->id - 1]);
146}
147
Samu Onkalo87dbf622010-11-24 12:57:03 -0800148static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
Samu Onkalo0efba162010-11-11 14:05:22 -0800149{
150 return container_of(led, struct lp5523_chip,
151 leds[led->id]);
152}
153
154static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode);
155static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode);
156static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern);
157
158static void lp5523_led_brightness_work(struct work_struct *work);
159
160static int lp5523_write(struct i2c_client *client, u8 reg, u8 value)
161{
162 return i2c_smbus_write_byte_data(client, reg, value);
163}
164
165static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf)
166{
167 s32 ret = i2c_smbus_read_byte_data(client, reg);
168
169 if (ret < 0)
170 return -EIO;
171
172 *buf = ret;
173 return 0;
174}
175
176static int lp5523_detect(struct i2c_client *client)
177{
178 int ret;
179 u8 buf;
180
181 ret = lp5523_write(client, LP5523_REG_ENABLE, 0x40);
182 if (ret)
183 return ret;
184 ret = lp5523_read(client, LP5523_REG_ENABLE, &buf);
185 if (ret)
186 return ret;
187 if (buf == 0x40)
188 return 0;
189 else
190 return -ENODEV;
191}
192
193static int lp5523_configure(struct i2c_client *client)
194{
195 struct lp5523_chip *chip = i2c_get_clientdata(client);
196 int ret = 0;
197 u8 status;
198
199 /* one pattern per engine setting led mux start and stop addresses */
200 u8 pattern[][LP5523_PROGRAM_LENGTH] = {
201 { 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
202 { 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
203 { 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
204 };
205
Samu Onkalo0efba162010-11-11 14:05:22 -0800206 ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800207 /* Chip startup time is 500 us, 1 - 2 ms gives some margin */
208 usleep_range(1000, 2000);
Samu Onkalo0efba162010-11-11 14:05:22 -0800209
210 ret |= lp5523_write(client, LP5523_REG_CONFIG,
211 LP5523_AUTO_INC | LP5523_PWR_SAVE |
212 LP5523_CP_AUTO | LP5523_AUTO_CLK |
213 LP5523_PWM_PWR_SAVE);
214
215 /* turn on all leds */
216 ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
217 ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
218
219 /* hardcode 32 bytes of memory for each engine from program memory */
220 ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00);
221 ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10);
222 ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20);
223
224 /* write led mux address space for each channel */
225 ret |= lp5523_load_program(&chip->engines[0], pattern[0]);
226 ret |= lp5523_load_program(&chip->engines[1], pattern[1]);
227 ret |= lp5523_load_program(&chip->engines[2], pattern[2]);
228
229 if (ret) {
230 dev_err(&client->dev, "could not load mux programs\n");
231 return -1;
232 }
233
234 /* set all engines exec state and mode to run 00101010 */
235 ret |= lp5523_write(client, LP5523_REG_ENABLE,
236 (LP5523_CMD_RUN | LP5523_ENABLE));
237
238 ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN);
239
240 if (ret) {
241 dev_err(&client->dev, "could not start mux programs\n");
242 return -1;
243 }
244
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800245 /* Let the programs run for couple of ms and check the engine status */
246 usleep_range(3000, 6000);
Samu Onkalo0efba162010-11-11 14:05:22 -0800247 lp5523_read(client, LP5523_REG_STATUS, &status);
248 status &= LP5523_ENG_STATUS_MASK;
249
250 if (status == LP5523_ENG_STATUS_MASK) {
251 dev_dbg(&client->dev, "all engines configured\n");
252 } else {
253 dev_info(&client->dev, "status == %x\n", status);
254 dev_err(&client->dev, "cound not configure LED engine\n");
255 return -1;
256 }
257
258 dev_info(&client->dev, "disabling engines\n");
259
260 ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED);
261
262 return ret;
263}
264
265static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode)
266{
267 struct lp5523_chip *chip = engine_to_lp5523(engine);
268 struct i2c_client *client = chip->client;
269 int ret;
270 u8 engine_state;
271
272 ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state);
273 if (ret)
274 goto fail;
275
276 engine_state &= ~(engine->engine_mask);
277
278 /* set mode only for this engine */
279 mode &= engine->engine_mask;
280
281 engine_state |= mode;
282
283 ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state);
284fail:
285 return ret;
286}
287
288static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux)
289{
290 struct lp5523_chip *chip = engine_to_lp5523(engine);
291 struct i2c_client *client = chip->client;
292 int ret = 0;
293
294 ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
295
296 ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page);
297 ret |= lp5523_write(client, LP5523_REG_PROG_MEM,
298 (u8)(mux >> 8));
299 ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux));
300 engine->led_mux = mux;
301
302 return ret;
303}
304
305static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern)
306{
307 struct lp5523_chip *chip = engine_to_lp5523(engine);
308 struct i2c_client *client = chip->client;
309
310 int ret = 0;
311
312 ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
313
314 ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL,
315 engine->prog_page);
316 ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM,
317 LP5523_PROGRAM_LENGTH, pattern);
318
319 return ret;
320}
321
322static int lp5523_run_program(struct lp5523_engine *engine)
323{
324 struct lp5523_chip *chip = engine_to_lp5523(engine);
325 struct i2c_client *client = chip->client;
326 int ret;
327
328 ret = lp5523_write(client, LP5523_REG_ENABLE,
329 LP5523_CMD_RUN | LP5523_ENABLE);
330 if (ret)
331 goto fail;
332
333 ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN);
334fail:
335 return ret;
336}
337
338static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
339{
340 int i;
341 u16 tmp_mux = 0;
342 len = len < LP5523_LEDS ? len : LP5523_LEDS;
343 for (i = 0; i < len; i++) {
344 switch (buf[i]) {
345 case '1':
346 tmp_mux |= (1 << i);
347 break;
348 case '0':
349 break;
350 case '\n':
351 i = len;
352 break;
353 default:
354 return -1;
355 }
356 }
357 *mux = tmp_mux;
358
359 return 0;
360}
361
362static void lp5523_mux_to_array(u16 led_mux, char *array)
363{
364 int i, pos = 0;
365 for (i = 0; i < LP5523_LEDS; i++)
366 pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
367
368 array[pos] = '\0';
369}
370
371/*--------------------------------------------------------------*/
372/* Sysfs interface */
373/*--------------------------------------------------------------*/
374
375static ssize_t show_engine_leds(struct device *dev,
376 struct device_attribute *attr,
377 char *buf, int nr)
378{
379 struct i2c_client *client = to_i2c_client(dev);
380 struct lp5523_chip *chip = i2c_get_clientdata(client);
381 char mux[LP5523_LEDS + 1];
382
383 lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
384
385 return sprintf(buf, "%s\n", mux);
386}
387
388#define show_leds(nr) \
389static ssize_t show_engine##nr##_leds(struct device *dev, \
390 struct device_attribute *attr, \
391 char *buf) \
392{ \
393 return show_engine_leds(dev, attr, buf, nr); \
394}
395show_leds(1)
396show_leds(2)
397show_leds(3)
398
399static ssize_t store_engine_leds(struct device *dev,
400 struct device_attribute *attr,
401 const char *buf, size_t len, int nr)
402{
403 struct i2c_client *client = to_i2c_client(dev);
404 struct lp5523_chip *chip = i2c_get_clientdata(client);
405 u16 mux = 0;
406
407 if (lp5523_mux_parse(buf, &mux, len))
408 return -EINVAL;
409
410 if (lp5523_load_mux(&chip->engines[nr - 1], mux))
411 return -EINVAL;
412
413 return len;
414}
415
416#define store_leds(nr) \
417static ssize_t store_engine##nr##_leds(struct device *dev, \
418 struct device_attribute *attr, \
419 const char *buf, size_t len) \
420{ \
421 return store_engine_leds(dev, attr, buf, len, nr); \
422}
423store_leds(1)
424store_leds(2)
425store_leds(3)
426
427static ssize_t lp5523_selftest(struct device *dev,
428 struct device_attribute *attr,
429 char *buf)
430{
431 struct i2c_client *client = to_i2c_client(dev);
432 struct lp5523_chip *chip = i2c_get_clientdata(client);
433 int i, ret, pos = 0;
434 int led = 0;
435 u8 status, adc, vdd;
436
437 mutex_lock(&chip->lock);
438
439 ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
440 if (ret < 0)
441 goto fail;
442
443 /* Check that ext clock is really in use if requested */
444 if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT))
445 if ((status & LP5523_EXT_CLK_USED) == 0)
446 goto fail;
447
448 /* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
449 lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
450 LP5523_EN_LEDTEST | 16);
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800451 usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
Samu Onkalo0efba162010-11-11 14:05:22 -0800452 ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
453 if (!(status & LP5523_LEDTEST_DONE))
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800454 usleep_range(3000, 6000); /* Was not ready. Wait little bit */
Samu Onkalo0efba162010-11-11 14:05:22 -0800455
456 ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
457 vdd--; /* There may be some fluctuation in measurement */
458
459 for (i = 0; i < LP5523_LEDS; i++) {
460 /* Skip non-existing channels */
461 if (chip->pdata->led_config[i].led_current == 0)
462 continue;
463
464 /* Set default current */
465 lp5523_write(chip->client,
466 LP5523_REG_LED_CURRENT_BASE + i,
467 chip->pdata->led_config[i].led_current);
468
469 lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800470 /* let current stabilize 2 - 4ms before measurements start */
471 usleep_range(2000, 4000);
Samu Onkalo0efba162010-11-11 14:05:22 -0800472 lp5523_write(chip->client,
473 LP5523_REG_LED_TEST_CTRL,
474 LP5523_EN_LEDTEST | i);
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800475 /* ADC conversion time is 2.7 ms typically */
476 usleep_range(3000, 6000);
Samu Onkalo0efba162010-11-11 14:05:22 -0800477 ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
478 if (!(status & LP5523_LEDTEST_DONE))
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800479 usleep_range(3000, 6000);/* Was not ready. Wait. */
Samu Onkalo0efba162010-11-11 14:05:22 -0800480 ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
481
482 if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
483 pos += sprintf(buf + pos, "LED %d FAIL\n", i);
484
485 lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00);
486
487 /* Restore current */
488 lp5523_write(chip->client,
489 LP5523_REG_LED_CURRENT_BASE + i,
490 chip->leds[led].led_current);
491 led++;
492 }
493 if (pos == 0)
494 pos = sprintf(buf, "OK\n");
495 goto release_lock;
496fail:
497 pos = sprintf(buf, "FAIL\n");
498
499release_lock:
500 mutex_unlock(&chip->lock);
501
502 return pos;
503}
504
505static void lp5523_set_brightness(struct led_classdev *cdev,
506 enum led_brightness brightness)
507{
508 struct lp5523_led *led = cdev_to_led(cdev);
509
510 led->brightness = (u8)brightness;
511
512 schedule_work(&led->brightness_work);
513}
514
515static void lp5523_led_brightness_work(struct work_struct *work)
516{
517 struct lp5523_led *led = container_of(work,
518 struct lp5523_led,
519 brightness_work);
520 struct lp5523_chip *chip = led_to_lp5523(led);
521 struct i2c_client *client = chip->client;
522
523 mutex_lock(&chip->lock);
524
525 lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr,
526 led->brightness);
527
528 mutex_unlock(&chip->lock);
529}
530
531static int lp5523_do_store_load(struct lp5523_engine *engine,
532 const char *buf, size_t len)
533{
534 struct lp5523_chip *chip = engine_to_lp5523(engine);
535 struct i2c_client *client = chip->client;
536 int ret, nrchars, offset = 0, i = 0;
537 char c[3];
538 unsigned cmd;
539 u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
540
541 while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) {
542 /* separate sscanfs because length is working only for %s */
543 ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
544 ret = sscanf(c, "%2x", &cmd);
545 if (ret != 1)
546 goto fail;
547 pattern[i] = (u8)cmd;
548
549 offset += nrchars;
550 i++;
551 }
552
553 /* Each instruction is 16bit long. Check that length is even */
554 if (i % 2)
555 goto fail;
556
557 mutex_lock(&chip->lock);
558
559 ret = lp5523_load_program(engine, pattern);
560 mutex_unlock(&chip->lock);
561
562 if (ret) {
563 dev_err(&client->dev, "failed loading pattern\n");
564 return ret;
565 }
566
567 return len;
568fail:
569 dev_err(&client->dev, "wrong pattern format\n");
570 return -EINVAL;
571}
572
573static ssize_t store_engine_load(struct device *dev,
574 struct device_attribute *attr,
575 const char *buf, size_t len, int nr)
576{
577 struct i2c_client *client = to_i2c_client(dev);
578 struct lp5523_chip *chip = i2c_get_clientdata(client);
579 return lp5523_do_store_load(&chip->engines[nr - 1], buf, len);
580}
581
582#define store_load(nr) \
583static ssize_t store_engine##nr##_load(struct device *dev, \
584 struct device_attribute *attr, \
585 const char *buf, size_t len) \
586{ \
587 return store_engine_load(dev, attr, buf, len, nr); \
588}
589store_load(1)
590store_load(2)
591store_load(3)
592
593static ssize_t show_engine_mode(struct device *dev,
594 struct device_attribute *attr,
595 char *buf, int nr)
596{
597 struct i2c_client *client = to_i2c_client(dev);
598 struct lp5523_chip *chip = i2c_get_clientdata(client);
599 switch (chip->engines[nr - 1].mode) {
600 case LP5523_CMD_RUN:
601 return sprintf(buf, "run\n");
602 case LP5523_CMD_LOAD:
603 return sprintf(buf, "load\n");
604 case LP5523_CMD_DISABLED:
605 return sprintf(buf, "disabled\n");
606 default:
607 return sprintf(buf, "disabled\n");
608 }
609}
610
611#define show_mode(nr) \
612static ssize_t show_engine##nr##_mode(struct device *dev, \
613 struct device_attribute *attr, \
614 char *buf) \
615{ \
616 return show_engine_mode(dev, attr, buf, nr); \
617}
618show_mode(1)
619show_mode(2)
620show_mode(3)
621
622static ssize_t store_engine_mode(struct device *dev,
623 struct device_attribute *attr,
624 const char *buf, size_t len, int nr)
625{
626 struct i2c_client *client = to_i2c_client(dev);
627 struct lp5523_chip *chip = i2c_get_clientdata(client);
628 struct lp5523_engine *engine = &chip->engines[nr - 1];
629 mutex_lock(&chip->lock);
630
631 if (!strncmp(buf, "run", 3))
632 lp5523_set_mode(engine, LP5523_CMD_RUN);
633 else if (!strncmp(buf, "load", 4))
634 lp5523_set_mode(engine, LP5523_CMD_LOAD);
635 else if (!strncmp(buf, "disabled", 8))
636 lp5523_set_mode(engine, LP5523_CMD_DISABLED);
637
638 mutex_unlock(&chip->lock);
639 return len;
640}
641
642#define store_mode(nr) \
643static ssize_t store_engine##nr##_mode(struct device *dev, \
644 struct device_attribute *attr, \
645 const char *buf, size_t len) \
646{ \
647 return store_engine_mode(dev, attr, buf, len, nr); \
648}
649store_mode(1)
650store_mode(2)
651store_mode(3)
652
653static ssize_t show_max_current(struct device *dev,
654 struct device_attribute *attr,
655 char *buf)
656{
657 struct led_classdev *led_cdev = dev_get_drvdata(dev);
658 struct lp5523_led *led = cdev_to_led(led_cdev);
659
660 return sprintf(buf, "%d\n", led->max_current);
661}
662
663static ssize_t show_current(struct device *dev,
664 struct device_attribute *attr,
665 char *buf)
666{
667 struct led_classdev *led_cdev = dev_get_drvdata(dev);
668 struct lp5523_led *led = cdev_to_led(led_cdev);
669
670 return sprintf(buf, "%d\n", led->led_current);
671}
672
673static ssize_t store_current(struct device *dev,
674 struct device_attribute *attr,
675 const char *buf, size_t len)
676{
677 struct led_classdev *led_cdev = dev_get_drvdata(dev);
678 struct lp5523_led *led = cdev_to_led(led_cdev);
679 struct lp5523_chip *chip = led_to_lp5523(led);
680 ssize_t ret;
681 unsigned long curr;
682
683 if (strict_strtoul(buf, 0, &curr))
684 return -EINVAL;
685
686 if (curr > led->max_current)
687 return -EINVAL;
688
689 mutex_lock(&chip->lock);
690 ret = lp5523_write(chip->client,
691 LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
692 (u8)curr);
693 mutex_unlock(&chip->lock);
694
695 if (ret < 0)
696 return ret;
697
698 led->led_current = (u8)curr;
699
700 return len;
701}
702
703/* led class device attributes */
704static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
705static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
706
707static struct attribute *lp5523_led_attributes[] = {
708 &dev_attr_led_current.attr,
709 &dev_attr_max_current.attr,
710 NULL,
711};
712
713static struct attribute_group lp5523_led_attribute_group = {
714 .attrs = lp5523_led_attributes
715};
716
717/* device attributes */
718static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO,
719 show_engine1_mode, store_engine1_mode);
720static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO,
721 show_engine2_mode, store_engine2_mode);
722static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO,
723 show_engine3_mode, store_engine3_mode);
724static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUGO,
725 show_engine1_leds, store_engine1_leds);
726static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUGO,
727 show_engine2_leds, store_engine2_leds);
728static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUGO,
729 show_engine3_leds, store_engine3_leds);
730static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load);
731static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load);
732static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load);
733static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL);
734
735static struct attribute *lp5523_attributes[] = {
736 &dev_attr_engine1_mode.attr,
737 &dev_attr_engine2_mode.attr,
738 &dev_attr_engine3_mode.attr,
739 &dev_attr_selftest.attr,
740 NULL
741};
742
743static struct attribute *lp5523_engine1_attributes[] = {
744 &dev_attr_engine1_load.attr,
745 &dev_attr_engine1_leds.attr,
746 NULL
747};
748
749static struct attribute *lp5523_engine2_attributes[] = {
750 &dev_attr_engine2_load.attr,
751 &dev_attr_engine2_leds.attr,
752 NULL
753};
754
755static struct attribute *lp5523_engine3_attributes[] = {
756 &dev_attr_engine3_load.attr,
757 &dev_attr_engine3_leds.attr,
758 NULL
759};
760
761static const struct attribute_group lp5523_group = {
762 .attrs = lp5523_attributes,
763};
764
765static const struct attribute_group lp5523_engine_group[] = {
766 {.attrs = lp5523_engine1_attributes },
767 {.attrs = lp5523_engine2_attributes },
768 {.attrs = lp5523_engine3_attributes },
769};
770
771static int lp5523_register_sysfs(struct i2c_client *client)
772{
773 struct device *dev = &client->dev;
774 int ret;
775
776 ret = sysfs_create_group(&dev->kobj, &lp5523_group);
777 if (ret < 0)
778 return ret;
779
780 return 0;
781}
782
783static void lp5523_unregister_sysfs(struct i2c_client *client)
784{
785 struct lp5523_chip *chip = i2c_get_clientdata(client);
786 struct device *dev = &client->dev;
787 int i;
788
789 sysfs_remove_group(&dev->kobj, &lp5523_group);
790
791 for (i = 0; i < ARRAY_SIZE(chip->engines); i++)
792 if (chip->engines[i].mode == LP5523_CMD_LOAD)
793 sysfs_remove_group(&dev->kobj, &lp5523_engine_group[i]);
794
795 for (i = 0; i < chip->num_leds; i++)
796 sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
797 &lp5523_led_attribute_group);
798}
799
800/*--------------------------------------------------------------*/
801/* Set chip operating mode */
802/*--------------------------------------------------------------*/
803static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode)
804{
805 /* engine to chip */
806 struct lp5523_chip *chip = engine_to_lp5523(engine);
807 struct i2c_client *client = chip->client;
808 struct device *dev = &client->dev;
809 int ret = 0;
810
811 /* if in that mode already do nothing, except for run */
812 if (mode == engine->mode && mode != LP5523_CMD_RUN)
813 return 0;
814
815 if (mode == LP5523_CMD_RUN) {
816 ret = lp5523_run_program(engine);
817 } else if (mode == LP5523_CMD_LOAD) {
818 lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
819 lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
820
821 ret = sysfs_create_group(&dev->kobj, engine->attributes);
822 if (ret)
823 return ret;
824 } else if (mode == LP5523_CMD_DISABLED) {
825 lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
826 }
827
828 /* remove load attribute from sysfs if not in load mode */
829 if (engine->mode == LP5523_CMD_LOAD && mode != LP5523_CMD_LOAD)
830 sysfs_remove_group(&dev->kobj, engine->attributes);
831
832 engine->mode = mode;
833
834 return ret;
835}
836
837/*--------------------------------------------------------------*/
838/* Probe, Attach, Remove */
839/*--------------------------------------------------------------*/
840static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
841{
842 if (id < 1 || id > LP5523_ENGINES)
843 return -1;
844 engine->id = id;
845 engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id);
846 engine->prog_page = id - 1;
847 engine->mux_page = id + 2;
848 engine->attributes = &lp5523_engine_group[id - 1];
849
850 return 0;
851}
852
853static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
854 int chan, struct lp5523_platform_data *pdata)
855{
856 char name[32];
857 int res;
858
859 if (chan >= LP5523_LEDS)
860 return -EINVAL;
861
862 if (pdata->led_config[chan].led_current) {
863 led->led_current = pdata->led_config[chan].led_current;
864 led->max_current = pdata->led_config[chan].max_current;
865 led->chan_nr = pdata->led_config[chan].chan_nr;
866
867 if (led->chan_nr >= LP5523_LEDS) {
868 dev_err(dev, "Use channel numbers between 0 and %d\n",
869 LP5523_LEDS - 1);
870 return -EINVAL;
871 }
872
Samu Onkalo278ad4f2011-01-12 16:59:17 -0800873 snprintf(name, sizeof(name), "%s:channel%d",
874 pdata->label ?: "lp5523", chan);
Samu Onkalo0efba162010-11-11 14:05:22 -0800875
876 led->cdev.name = name;
877 led->cdev.brightness_set = lp5523_set_brightness;
878 res = led_classdev_register(dev, &led->cdev);
879 if (res < 0) {
880 dev_err(dev, "couldn't register led on channel %d\n",
881 chan);
882 return res;
883 }
884 res = sysfs_create_group(&led->cdev.dev->kobj,
885 &lp5523_led_attribute_group);
886 if (res < 0) {
887 dev_err(dev, "couldn't register current attribute\n");
888 led_classdev_unregister(&led->cdev);
889 return res;
890 }
891 } else {
892 led->led_current = 0;
893 }
894 return 0;
895}
896
897static struct i2c_driver lp5523_driver;
898
899static int lp5523_probe(struct i2c_client *client,
900 const struct i2c_device_id *id)
901{
902 struct lp5523_chip *chip;
903 struct lp5523_platform_data *pdata;
904 int ret, i, led;
905
906 chip = kzalloc(sizeof(*chip), GFP_KERNEL);
907 if (!chip)
908 return -ENOMEM;
909
910 i2c_set_clientdata(client, chip);
911 chip->client = client;
912
913 pdata = client->dev.platform_data;
914
915 if (!pdata) {
916 dev_err(&client->dev, "no platform data\n");
917 ret = -EINVAL;
918 goto fail1;
919 }
920
921 mutex_init(&chip->lock);
922
923 chip->pdata = pdata;
924
925 if (pdata->setup_resources) {
926 ret = pdata->setup_resources();
927 if (ret < 0)
928 goto fail1;
929 }
930
931 if (pdata->enable) {
932 pdata->enable(0);
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800933 usleep_range(1000, 2000); /* Keep enable down at least 1ms */
Samu Onkalo0efba162010-11-11 14:05:22 -0800934 pdata->enable(1);
Samu Onkalo2e4840e2010-11-24 12:57:04 -0800935 usleep_range(1000, 2000); /* 500us abs min. */
Samu Onkalo0efba162010-11-11 14:05:22 -0800936 }
937
Samu Onkalo11e79462010-11-24 12:57:05 -0800938 lp5523_write(client, LP5523_REG_RESET, 0xff);
939 usleep_range(10000, 20000); /*
940 * Exact value is not available. 10 - 20ms
941 * appears to be enough for reset.
942 */
Samu Onkalo0efba162010-11-11 14:05:22 -0800943 ret = lp5523_detect(client);
944 if (ret)
945 goto fail2;
946
947 dev_info(&client->dev, "LP5523 Programmable led chip found\n");
948
949 /* Initialize engines */
950 for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
951 ret = lp5523_init_engine(&chip->engines[i], i + 1);
952 if (ret) {
953 dev_err(&client->dev, "error initializing engine\n");
954 goto fail2;
955 }
956 }
957 ret = lp5523_configure(client);
958 if (ret < 0) {
959 dev_err(&client->dev, "error configuring chip\n");
960 goto fail2;
961 }
962
963 /* Initialize leds */
964 chip->num_channels = pdata->num_channels;
965 chip->num_leds = 0;
966 led = 0;
967 for (i = 0; i < pdata->num_channels; i++) {
968 /* Do not initialize channels that are not connected */
969 if (pdata->led_config[i].led_current == 0)
970 continue;
971
972 ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata);
973 if (ret) {
974 dev_err(&client->dev, "error initializing leds\n");
975 goto fail3;
976 }
977 chip->num_leds++;
978
979 chip->leds[led].id = led;
980 /* Set LED current */
981 lp5523_write(client,
982 LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
983 chip->leds[led].led_current);
984
985 INIT_WORK(&(chip->leds[led].brightness_work),
986 lp5523_led_brightness_work);
987
988 led++;
989 }
990
991 ret = lp5523_register_sysfs(client);
992 if (ret) {
993 dev_err(&client->dev, "registering sysfs failed\n");
994 goto fail3;
995 }
996 return ret;
997fail3:
998 for (i = 0; i < chip->num_leds; i++) {
999 led_classdev_unregister(&chip->leds[i].cdev);
1000 cancel_work_sync(&chip->leds[i].brightness_work);
1001 }
1002fail2:
1003 if (pdata->enable)
1004 pdata->enable(0);
1005 if (pdata->release_resources)
1006 pdata->release_resources();
1007fail1:
1008 kfree(chip);
1009 return ret;
1010}
1011
1012static int lp5523_remove(struct i2c_client *client)
1013{
1014 struct lp5523_chip *chip = i2c_get_clientdata(client);
1015 int i;
1016
1017 lp5523_unregister_sysfs(client);
1018
1019 for (i = 0; i < chip->num_leds; i++) {
1020 led_classdev_unregister(&chip->leds[i].cdev);
1021 cancel_work_sync(&chip->leds[i].brightness_work);
1022 }
1023
1024 if (chip->pdata->enable)
1025 chip->pdata->enable(0);
1026 if (chip->pdata->release_resources)
1027 chip->pdata->release_resources();
1028 kfree(chip);
1029 return 0;
1030}
1031
1032static const struct i2c_device_id lp5523_id[] = {
1033 { "lp5523", 0 },
1034 { }
1035};
1036
1037MODULE_DEVICE_TABLE(i2c, lp5523_id);
1038
1039static struct i2c_driver lp5523_driver = {
1040 .driver = {
1041 .name = "lp5523",
1042 },
1043 .probe = lp5523_probe,
1044 .remove = lp5523_remove,
1045 .id_table = lp5523_id,
1046};
1047
1048static int __init lp5523_init(void)
1049{
1050 int ret;
1051
1052 ret = i2c_add_driver(&lp5523_driver);
1053
1054 if (ret < 0)
1055 printk(KERN_ALERT "Adding lp5523 driver failed\n");
1056
1057 return ret;
1058}
1059
1060static void __exit lp5523_exit(void)
1061{
1062 i2c_del_driver(&lp5523_driver);
1063}
1064
1065module_init(lp5523_init);
1066module_exit(lp5523_exit);
1067
1068MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
1069MODULE_DESCRIPTION("LP5523 LED engine");
1070MODULE_LICENSE("GPL");