blob: b6acd19b458e91b08f973d438cf45506e5dc1270 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * linux/drivers/char/clps711x.c
3 *
4 * Driver for CLPS711x serial ports
5 *
6 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
7 *
8 * Copyright 1999 ARM Limited
9 * Copyright (C) 2000 Deep Blue Solutions Ltd.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or
14 * (at your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
20 *
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Linus Torvalds1da177e2005-04-16 15:20:36 -070024 */
Linus Torvalds1da177e2005-04-16 15:20:36 -070025
26#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
27#define SUPPORT_SYSRQ
28#endif
29
30#include <linux/module.h>
31#include <linux/ioport.h>
32#include <linux/init.h>
33#include <linux/console.h>
34#include <linux/sysrq.h>
35#include <linux/spinlock.h>
36#include <linux/device.h>
37#include <linux/tty.h>
38#include <linux/tty_flip.h>
39#include <linux/serial_core.h>
40#include <linux/serial.h>
Russell King99730222009-03-25 10:21:35 +000041#include <linux/io.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070042
Russell Kinga09e64f2008-08-05 16:14:15 +010043#include <mach/hardware.h>
Linus Torvalds1da177e2005-04-16 15:20:36 -070044#include <asm/irq.h>
45#include <asm/hardware/clps7111.h>
46
47#define UART_NR 2
48
49#define SERIAL_CLPS711X_MAJOR 204
50#define SERIAL_CLPS711X_MINOR 40
51#define SERIAL_CLPS711X_NR UART_NR
52
53/*
54 * We use the relevant SYSCON register as a base address for these ports.
55 */
56#define UBRLCR(port) ((port)->iobase + UBRLCR1 - SYSCON1)
57#define UARTDR(port) ((port)->iobase + UARTDR1 - SYSCON1)
58#define SYSFLG(port) ((port)->iobase + SYSFLG1 - SYSCON1)
59#define SYSCON(port) ((port)->iobase + SYSCON1 - SYSCON1)
60
61#define TX_IRQ(port) ((port)->irq)
62#define RX_IRQ(port) ((port)->irq + 1)
63
64#define UART_ANY_ERR (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR)
65
66#define tx_enabled(port) ((port)->unused[0])
67
Russell Kingb129a8c2005-08-31 10:12:14 +010068static void clps711xuart_stop_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -070069{
70 if (tx_enabled(port)) {
71 disable_irq(TX_IRQ(port));
72 tx_enabled(port) = 0;
73 }
74}
75
Russell Kingb129a8c2005-08-31 10:12:14 +010076static void clps711xuart_start_tx(struct uart_port *port)
Linus Torvalds1da177e2005-04-16 15:20:36 -070077{
78 if (!tx_enabled(port)) {
79 enable_irq(TX_IRQ(port));
80 tx_enabled(port) = 1;
81 }
82}
83
84static void clps711xuart_stop_rx(struct uart_port *port)
85{
86 disable_irq(RX_IRQ(port));
87}
88
89static void clps711xuart_enable_ms(struct uart_port *port)
90{
91}
92
David Howells7d12e782006-10-05 14:55:46 +010093static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -070094{
95 struct uart_port *port = dev_id;
Alan Coxebd2c8f2009-09-19 13:13:28 -070096 struct tty_struct *tty = port->state->port.tty;
Russell Kingf9937242005-09-24 10:12:47 +010097 unsigned int status, ch, flg;
Linus Torvalds1da177e2005-04-16 15:20:36 -070098
99 status = clps_readl(SYSFLG(port));
100 while (!(status & SYSFLG_URXFE)) {
101 ch = clps_readl(UARTDR(port));
102
Linus Torvalds1da177e2005-04-16 15:20:36 -0700103 port->icount.rx++;
104
105 flg = TTY_NORMAL;
106
107 /*
108 * Note that the error handling code is
109 * out of the main execution path
110 */
Russell King2a9604b2005-04-26 15:32:00 +0100111 if (unlikely(ch & UART_ANY_ERR)) {
112 if (ch & UARTDR_PARERR)
113 port->icount.parity++;
114 else if (ch & UARTDR_FRMERR)
115 port->icount.frame++;
116 if (ch & UARTDR_OVERR)
117 port->icount.overrun++;
118
119 ch &= port->read_status_mask;
120
121 if (ch & UARTDR_PARERR)
122 flg = TTY_PARITY;
123 else if (ch & UARTDR_FRMERR)
124 flg = TTY_FRAME;
125
126#ifdef SUPPORT_SYSRQ
127 port->sysrq = 0;
128#endif
129 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700130
David Howells7d12e782006-10-05 14:55:46 +0100131 if (uart_handle_sysrq_char(port, ch))
Linus Torvalds1da177e2005-04-16 15:20:36 -0700132 goto ignore_char;
133
Linus Torvalds1da177e2005-04-16 15:20:36 -0700134 /*
135 * CHECK: does overrun affect the current character?
136 * ASSUMPTION: it does not.
137 */
Russell King05ab3012005-05-09 23:21:59 +0100138 uart_insert_char(port, ch, UARTDR_OVERR, ch, flg);
Russell King2a9604b2005-04-26 15:32:00 +0100139
140 ignore_char:
141 status = clps_readl(SYSFLG(port));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700142 }
Russell King2a9604b2005-04-26 15:32:00 +0100143 tty_flip_buffer_push(tty);
144 return IRQ_HANDLED;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700145}
146
David Howells7d12e782006-10-05 14:55:46 +0100147static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700148{
149 struct uart_port *port = dev_id;
Alan Coxebd2c8f2009-09-19 13:13:28 -0700150 struct circ_buf *xmit = &port->state->xmit;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700151 int count;
152
153 if (port->x_char) {
154 clps_writel(port->x_char, UARTDR(port));
155 port->icount.tx++;
156 port->x_char = 0;
157 return IRQ_HANDLED;
158 }
159 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
Russell Kingb129a8c2005-08-31 10:12:14 +0100160 clps711xuart_stop_tx(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700161 return IRQ_HANDLED;
162 }
163
164 count = port->fifosize >> 1;
165 do {
166 clps_writel(xmit->buf[xmit->tail], UARTDR(port));
167 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
168 port->icount.tx++;
169 if (uart_circ_empty(xmit))
170 break;
171 } while (--count > 0);
172
173 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
174 uart_write_wakeup(port);
175
176 if (uart_circ_empty(xmit))
Russell Kingb129a8c2005-08-31 10:12:14 +0100177 clps711xuart_stop_tx(port);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700178
179 return IRQ_HANDLED;
180}
181
182static unsigned int clps711xuart_tx_empty(struct uart_port *port)
183{
184 unsigned int status = clps_readl(SYSFLG(port));
185 return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT;
186}
187
188static unsigned int clps711xuart_get_mctrl(struct uart_port *port)
189{
190 unsigned int port_addr;
191 unsigned int result = 0;
192 unsigned int status;
193
194 port_addr = SYSFLG(port);
195 if (port_addr == SYSFLG1) {
196 status = clps_readl(SYSFLG1);
197 if (status & SYSFLG1_DCD)
198 result |= TIOCM_CAR;
199 if (status & SYSFLG1_DSR)
200 result |= TIOCM_DSR;
201 if (status & SYSFLG1_CTS)
202 result |= TIOCM_CTS;
203 }
204
205 return result;
206}
207
208static void
209clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl)
210{
211}
212
213static void clps711xuart_break_ctl(struct uart_port *port, int break_state)
214{
215 unsigned long flags;
216 unsigned int ubrlcr;
217
218 spin_lock_irqsave(&port->lock, flags);
219 ubrlcr = clps_readl(UBRLCR(port));
220 if (break_state == -1)
221 ubrlcr |= UBRLCR_BREAK;
222 else
223 ubrlcr &= ~UBRLCR_BREAK;
224 clps_writel(ubrlcr, UBRLCR(port));
225 spin_unlock_irqrestore(&port->lock, flags);
226}
227
228static int clps711xuart_startup(struct uart_port *port)
229{
230 unsigned int syscon;
231 int retval;
232
233 tx_enabled(port) = 1;
234
235 /*
236 * Allocate the IRQs
237 */
238 retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0,
239 "clps711xuart_tx", port);
240 if (retval)
241 return retval;
242
243 retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0,
244 "clps711xuart_rx", port);
245 if (retval) {
246 free_irq(TX_IRQ(port), port);
247 return retval;
248 }
249
250 /*
251 * enable the port
252 */
253 syscon = clps_readl(SYSCON(port));
254 syscon |= SYSCON_UARTEN;
255 clps_writel(syscon, SYSCON(port));
256
257 return 0;
258}
259
260static void clps711xuart_shutdown(struct uart_port *port)
261{
262 unsigned int ubrlcr, syscon;
263
264 /*
265 * Free the interrupt
266 */
267 free_irq(TX_IRQ(port), port); /* TX interrupt */
268 free_irq(RX_IRQ(port), port); /* RX interrupt */
269
270 /*
271 * disable the port
272 */
273 syscon = clps_readl(SYSCON(port));
274 syscon &= ~SYSCON_UARTEN;
275 clps_writel(syscon, SYSCON(port));
276
277 /*
278 * disable break condition and fifos
279 */
280 ubrlcr = clps_readl(UBRLCR(port));
281 ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK);
282 clps_writel(ubrlcr, UBRLCR(port));
283}
284
285static void
Alan Cox606d0992006-12-08 02:38:45 -0800286clps711xuart_set_termios(struct uart_port *port, struct ktermios *termios,
287 struct ktermios *old)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700288{
289 unsigned int ubrlcr, baud, quot;
290 unsigned long flags;
291
292 /*
293 * We don't implement CREAD.
294 */
295 termios->c_cflag |= CREAD;
296
297 /*
298 * Ask the core to calculate the divisor for us.
299 */
300 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
301 quot = uart_get_divisor(port, baud);
302
303 switch (termios->c_cflag & CSIZE) {
304 case CS5:
305 ubrlcr = UBRLCR_WRDLEN5;
306 break;
307 case CS6:
308 ubrlcr = UBRLCR_WRDLEN6;
309 break;
310 case CS7:
311 ubrlcr = UBRLCR_WRDLEN7;
312 break;
313 default: // CS8
314 ubrlcr = UBRLCR_WRDLEN8;
315 break;
316 }
317 if (termios->c_cflag & CSTOPB)
318 ubrlcr |= UBRLCR_XSTOP;
319 if (termios->c_cflag & PARENB) {
320 ubrlcr |= UBRLCR_PRTEN;
321 if (!(termios->c_cflag & PARODD))
322 ubrlcr |= UBRLCR_EVENPRT;
323 }
324 if (port->fifosize > 1)
325 ubrlcr |= UBRLCR_FIFOEN;
326
327 spin_lock_irqsave(&port->lock, flags);
328
329 /*
330 * Update the per-port timeout.
331 */
332 uart_update_timeout(port, termios->c_cflag, baud);
333
334 port->read_status_mask = UARTDR_OVERR;
335 if (termios->c_iflag & INPCK)
336 port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR;
337
338 /*
339 * Characters to ignore
340 */
341 port->ignore_status_mask = 0;
342 if (termios->c_iflag & IGNPAR)
343 port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR;
344 if (termios->c_iflag & IGNBRK) {
345 /*
346 * If we're ignoring parity and break indicators,
347 * ignore overruns to (for real raw support).
348 */
349 if (termios->c_iflag & IGNPAR)
350 port->ignore_status_mask |= UARTDR_OVERR;
351 }
352
353 quot -= 1;
354
355 clps_writel(ubrlcr | quot, UBRLCR(port));
356
357 spin_unlock_irqrestore(&port->lock, flags);
358}
359
360static const char *clps711xuart_type(struct uart_port *port)
361{
362 return port->type == PORT_CLPS711X ? "CLPS711x" : NULL;
363}
364
365/*
366 * Configure/autoconfigure the port.
367 */
368static void clps711xuart_config_port(struct uart_port *port, int flags)
369{
370 if (flags & UART_CONFIG_TYPE)
371 port->type = PORT_CLPS711X;
372}
373
374static void clps711xuart_release_port(struct uart_port *port)
375{
376}
377
378static int clps711xuart_request_port(struct uart_port *port)
379{
380 return 0;
381}
382
383static struct uart_ops clps711x_pops = {
384 .tx_empty = clps711xuart_tx_empty,
385 .set_mctrl = clps711xuart_set_mctrl_null,
386 .get_mctrl = clps711xuart_get_mctrl,
387 .stop_tx = clps711xuart_stop_tx,
388 .start_tx = clps711xuart_start_tx,
389 .stop_rx = clps711xuart_stop_rx,
390 .enable_ms = clps711xuart_enable_ms,
391 .break_ctl = clps711xuart_break_ctl,
392 .startup = clps711xuart_startup,
393 .shutdown = clps711xuart_shutdown,
394 .set_termios = clps711xuart_set_termios,
395 .type = clps711xuart_type,
396 .config_port = clps711xuart_config_port,
397 .release_port = clps711xuart_release_port,
398 .request_port = clps711xuart_request_port,
399};
400
401static struct uart_port clps711x_ports[UART_NR] = {
402 {
403 .iobase = SYSCON1,
404 .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
405 .uartclk = 3686400,
406 .fifosize = 16,
407 .ops = &clps711x_pops,
408 .line = 0,
Russell Kingce8337c2006-01-21 19:28:15 +0000409 .flags = UPF_BOOT_AUTOCONF,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700410 },
411 {
412 .iobase = SYSCON2,
413 .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */
414 .uartclk = 3686400,
415 .fifosize = 16,
416 .ops = &clps711x_pops,
417 .line = 1,
Russell Kingce8337c2006-01-21 19:28:15 +0000418 .flags = UPF_BOOT_AUTOCONF,
Linus Torvalds1da177e2005-04-16 15:20:36 -0700419 }
420};
421
422#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
Russell Kingd3587882006-03-20 20:00:09 +0000423static void clps711xuart_console_putchar(struct uart_port *port, int ch)
424{
425 while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF)
426 barrier();
427 clps_writel(ch, UARTDR(port));
428}
429
Linus Torvalds1da177e2005-04-16 15:20:36 -0700430/*
431 * Print a string to the serial port trying not to disturb
432 * any possible real use of the port...
433 *
434 * The console_lock must be held when we get here.
435 *
436 * Note that this is called with interrupts already disabled
437 */
438static void
439clps711xuart_console_write(struct console *co, const char *s,
440 unsigned int count)
441{
442 struct uart_port *port = clps711x_ports + co->index;
443 unsigned int status, syscon;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700444
445 /*
446 * Ensure that the port is enabled.
447 */
448 syscon = clps_readl(SYSCON(port));
449 clps_writel(syscon | SYSCON_UARTEN, SYSCON(port));
450
Russell Kingd3587882006-03-20 20:00:09 +0000451 uart_console_write(port, s, count, clps711xuart_console_putchar);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700452
453 /*
454 * Finally, wait for transmitter to become empty
455 * and restore the uart state.
456 */
457 do {
458 status = clps_readl(SYSFLG(port));
459 } while (status & SYSFLG_UBUSY);
460
461 clps_writel(syscon, SYSCON(port));
462}
463
464static void __init
465clps711xuart_console_get_options(struct uart_port *port, int *baud,
466 int *parity, int *bits)
467{
468 if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) {
469 unsigned int ubrlcr, quot;
470
471 ubrlcr = clps_readl(UBRLCR(port));
472
473 *parity = 'n';
474 if (ubrlcr & UBRLCR_PRTEN) {
475 if (ubrlcr & UBRLCR_EVENPRT)
476 *parity = 'e';
477 else
478 *parity = 'o';
479 }
480
481 if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7)
482 *bits = 7;
483 else
484 *bits = 8;
485
486 quot = ubrlcr & UBRLCR_BAUD_MASK;
487 *baud = port->uartclk / (16 * (quot + 1));
488 }
489}
490
491static int __init clps711xuart_console_setup(struct console *co, char *options)
492{
493 struct uart_port *port;
494 int baud = 38400;
495 int bits = 8;
496 int parity = 'n';
497 int flow = 'n';
498
499 /*
500 * Check whether an invalid uart number has been specified, and
501 * if so, search for the first available port that does have
502 * console support.
503 */
504 port = uart_get_console(clps711x_ports, UART_NR, co);
505
506 if (options)
507 uart_parse_options(options, &baud, &parity, &bits, &flow);
508 else
509 clps711xuart_console_get_options(port, &baud, &parity, &bits);
510
511 return uart_set_options(port, co, baud, parity, bits, flow);
512}
513
Vincent Sanders2d934862005-09-14 22:36:03 +0100514static struct uart_driver clps711x_reg;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700515static struct console clps711x_console = {
516 .name = "ttyCL",
517 .write = clps711xuart_console_write,
518 .device = uart_console_device,
519 .setup = clps711xuart_console_setup,
520 .flags = CON_PRINTBUFFER,
521 .index = -1,
522 .data = &clps711x_reg,
523};
524
525static int __init clps711xuart_console_init(void)
526{
527 register_console(&clps711x_console);
528 return 0;
529}
530console_initcall(clps711xuart_console_init);
531
532#define CLPS711X_CONSOLE &clps711x_console
533#else
534#define CLPS711X_CONSOLE NULL
535#endif
536
537static struct uart_driver clps711x_reg = {
538 .driver_name = "ttyCL",
539 .dev_name = "ttyCL",
Linus Torvalds1da177e2005-04-16 15:20:36 -0700540 .major = SERIAL_CLPS711X_MAJOR,
541 .minor = SERIAL_CLPS711X_MINOR,
542 .nr = UART_NR,
543
544 .cons = CLPS711X_CONSOLE,
545};
546
547static int __init clps711xuart_init(void)
548{
549 int ret, i;
550
Adrian Bunkd87a6d92008-07-16 21:53:31 +0100551 printk(KERN_INFO "Serial: CLPS711x driver\n");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700552
553 ret = uart_register_driver(&clps711x_reg);
554 if (ret)
555 return ret;
556
557 for (i = 0; i < UART_NR; i++)
558 uart_add_one_port(&clps711x_reg, &clps711x_ports[i]);
559
560 return 0;
561}
562
563static void __exit clps711xuart_exit(void)
564{
565 int i;
566
567 for (i = 0; i < UART_NR; i++)
568 uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]);
569
570 uart_unregister_driver(&clps711x_reg);
571}
572
573module_init(clps711xuart_init);
574module_exit(clps711xuart_exit);
575
576MODULE_AUTHOR("Deep Blue Solutions Ltd");
Adrian Bunkd87a6d92008-07-16 21:53:31 +0100577MODULE_DESCRIPTION("CLPS-711x generic serial driver");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700578MODULE_LICENSE("GPL");
579MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR);