Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 1 | /* mac8390.c: New driver for 8390-based Nubus (or Nubus-alike) |
| 2 | Ethernet cards on Linux */ |
| 3 | /* Based on the former daynaport.c driver, by Alan Cox. Some code |
| 4 | taken from or inspired by skeleton.c by Donald Becker, acenic.c by |
| 5 | Jes Sorensen, and ne2k-pci.c by Donald Becker and Paul Gortmaker. |
| 6 | |
| 7 | This software may be used and distributed according to the terms of |
| 8 | the GNU Public License, incorporated herein by reference. */ |
| 9 | |
| 10 | /* 2000-02-28: support added for Dayna and Kinetics cards by |
| 11 | A.G.deWijn@phys.uu.nl */ |
| 12 | /* 2000-04-04: support added for Dayna2 by bart@etpmod.phys.tue.nl */ |
| 13 | /* 2001-04-18: support for DaynaPort E/LC-M by rayk@knightsmanor.org */ |
| 14 | /* 2001-05-15: support for Cabletron ported from old daynaport driver |
| 15 | * and fixed access to Sonic Sys card which masquerades as a Farallon |
| 16 | * by rayk@knightsmanor.org */ |
| 17 | |
Linus Torvalds | 1da177e | 2005-04-16 15:20:36 -0700 | [diff] [blame] | 18 | #include <linux/module.h> |
| 19 | #include <linux/kernel.h> |
| 20 | #include <linux/types.h> |
| 21 | #include <linux/fcntl.h> |
| 22 | #include <linux/interrupt.h> |
| 23 | #include <linux/ptrace.h> |
| 24 | #include <linux/ioport.h> |
| 25 | #include <linux/nubus.h> |
| 26 | #include <linux/in.h> |
| 27 | #include <linux/slab.h> |
| 28 | #include <linux/string.h> |
| 29 | #include <linux/errno.h> |
| 30 | #include <linux/init.h> |
| 31 | #include <linux/netdevice.h> |
| 32 | #include <linux/etherdevice.h> |
| 33 | #include <linux/skbuff.h> |
| 34 | #include <linux/bitops.h> |
| 35 | |
| 36 | #include <asm/system.h> |
| 37 | #include <asm/io.h> |
| 38 | #include <asm/dma.h> |
| 39 | #include <asm/hwtest.h> |
| 40 | #include <asm/macints.h> |
| 41 | |
| 42 | #include "8390.h" |
| 43 | |
| 44 | #define WD_START_PG 0x00 /* First page of TX buffer */ |
| 45 | #define CABLETRON_RX_START_PG 0x00 /* First page of RX buffer */ |
| 46 | #define CABLETRON_RX_STOP_PG 0x30 /* Last page +1 of RX ring */ |
| 47 | #define CABLETRON_TX_START_PG CABLETRON_RX_STOP_PG /* First page of TX buffer */ |
| 48 | |
| 49 | /* Unfortunately it seems we have to hardcode these for the moment */ |
| 50 | /* Shouldn't the card know about this? Does anyone know where to read it off the card? Do we trust the data provided by the card? */ |
| 51 | |
| 52 | #define DAYNA_8390_BASE 0x80000 |
| 53 | #define DAYNA_8390_MEM 0x00000 |
| 54 | |
| 55 | #define KINETICS_8390_BASE 0x80000 |
| 56 | #define KINETICS_8390_MEM 0x00000 |
| 57 | |
| 58 | #define CABLETRON_8390_BASE 0x90000 |
| 59 | #define CABLETRON_8390_MEM 0x00000 |
| 60 | |
| 61 | enum mac8390_type { |
| 62 | MAC8390_NONE = -1, |
| 63 | MAC8390_APPLE, |
| 64 | MAC8390_ASANTE, |
| 65 | MAC8390_FARALLON, /* Apple, Asante, and Farallon are all compatible */ |
| 66 | MAC8390_CABLETRON, |
| 67 | MAC8390_DAYNA, |
| 68 | MAC8390_INTERLAN, |
| 69 | MAC8390_KINETICS, |
| 70 | MAC8390_FOCUS, |
| 71 | MAC8390_SONICSYS, |
| 72 | MAC8390_DAYNA2, |
| 73 | MAC8390_DAYNA3, |
| 74 | }; |
| 75 | |
| 76 | static const char * cardname[] = { |
| 77 | "apple", |
| 78 | "asante", |
| 79 | "farallon", |
| 80 | "cabletron", |
| 81 | "dayna", |
| 82 | "interlan", |
| 83 | "kinetics", |
| 84 | "focus", |
| 85 | "sonic systems", |
| 86 | "dayna2", |
| 87 | "dayna_lc", |
| 88 | }; |
| 89 | |
| 90 | static int word16[] = { |
| 91 | 1, /* apple */ |
| 92 | 1, /* asante */ |
| 93 | 1, /* farallon */ |
| 94 | 1, /* cabletron */ |
| 95 | 0, /* dayna */ |
| 96 | 1, /* interlan */ |
| 97 | 0, /* kinetics */ |
| 98 | 1, /* focus (??) */ |
| 99 | 1, /* sonic systems */ |
| 100 | 1, /* dayna2 */ |
| 101 | 1, /* dayna-lc */ |
| 102 | }; |
| 103 | |
| 104 | /* on which cards do we use NuBus resources? */ |
| 105 | static int useresources[] = { |
| 106 | 1, /* apple */ |
| 107 | 1, /* asante */ |
| 108 | 1, /* farallon */ |
| 109 | 0, /* cabletron */ |
| 110 | 0, /* dayna */ |
| 111 | 0, /* interlan */ |
| 112 | 0, /* kinetics */ |
| 113 | 0, /* focus (??) */ |
| 114 | 1, /* sonic systems */ |
| 115 | 1, /* dayna2 */ |
| 116 | 1, /* dayna-lc */ |
| 117 | }; |
| 118 | |
| 119 | static char version[] __initdata = |
| 120 | "mac8390.c: v0.4 2001-05-15 David Huggins-Daines <dhd@debian.org> and others\n"; |
| 121 | |
| 122 | extern enum mac8390_type mac8390_ident(struct nubus_dev * dev); |
| 123 | extern int mac8390_memsize(unsigned long membase); |
| 124 | extern int mac8390_memtest(struct net_device * dev); |
| 125 | static int mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev, |
| 126 | enum mac8390_type type); |
| 127 | |
| 128 | static int mac8390_open(struct net_device * dev); |
| 129 | static int mac8390_close(struct net_device * dev); |
| 130 | static void mac8390_no_reset(struct net_device *dev); |
| 131 | |
| 132 | /* Sane (32-bit chunk memory read/write) - Apple/Asante/Farallon do this*/ |
| 133 | static void sane_get_8390_hdr(struct net_device *dev, |
| 134 | struct e8390_pkt_hdr *hdr, int ring_page); |
| 135 | static void sane_block_input(struct net_device * dev, int count, |
| 136 | struct sk_buff * skb, int ring_offset); |
| 137 | static void sane_block_output(struct net_device * dev, int count, |
| 138 | const unsigned char * buf, const int start_page); |
| 139 | |
| 140 | /* dayna_memcpy to and from card */ |
| 141 | static void dayna_memcpy_fromcard(struct net_device *dev, void *to, |
| 142 | int from, int count); |
| 143 | static void dayna_memcpy_tocard(struct net_device *dev, int to, |
| 144 | const void *from, int count); |
| 145 | |
| 146 | /* Dayna - Dayna/Kinetics use this */ |
| 147 | static void dayna_get_8390_hdr(struct net_device *dev, |
| 148 | struct e8390_pkt_hdr *hdr, int ring_page); |
| 149 | static void dayna_block_input(struct net_device *dev, int count, |
| 150 | struct sk_buff *skb, int ring_offset); |
| 151 | static void dayna_block_output(struct net_device *dev, int count, |
| 152 | const unsigned char *buf, int start_page); |
| 153 | |
| 154 | #define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) |
| 155 | #define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) |
| 156 | |
| 157 | /* Slow Sane (16-bit chunk memory read/write) Cabletron uses this */ |
| 158 | static void slow_sane_get_8390_hdr(struct net_device *dev, |
| 159 | struct e8390_pkt_hdr *hdr, int ring_page); |
| 160 | static void slow_sane_block_input(struct net_device *dev, int count, |
| 161 | struct sk_buff *skb, int ring_offset); |
| 162 | static void slow_sane_block_output(struct net_device *dev, int count, |
| 163 | const unsigned char *buf, int start_page); |
| 164 | static void word_memcpy_tocard(void *tp, const void *fp, int count); |
| 165 | static void word_memcpy_fromcard(void *tp, const void *fp, int count); |
| 166 | |
| 167 | enum mac8390_type __init mac8390_ident(struct nubus_dev * dev) |
| 168 | { |
| 169 | if (dev->dr_sw == NUBUS_DRSW_ASANTE) |
| 170 | return MAC8390_ASANTE; |
| 171 | if (dev->dr_sw == NUBUS_DRSW_FARALLON) |
| 172 | return MAC8390_FARALLON; |
| 173 | if (dev->dr_sw == NUBUS_DRSW_KINETICS) |
| 174 | return MAC8390_KINETICS; |
| 175 | if (dev->dr_sw == NUBUS_DRSW_DAYNA) |
| 176 | return MAC8390_DAYNA; |
| 177 | if (dev->dr_sw == NUBUS_DRSW_DAYNA2) |
| 178 | return MAC8390_DAYNA2; |
| 179 | if (dev->dr_sw == NUBUS_DRSW_DAYNA_LC) |
| 180 | return MAC8390_DAYNA3; |
| 181 | if (dev->dr_hw == NUBUS_DRHW_CABLETRON) |
| 182 | return MAC8390_CABLETRON; |
| 183 | return MAC8390_NONE; |
| 184 | } |
| 185 | |
| 186 | int __init mac8390_memsize(unsigned long membase) |
| 187 | { |
| 188 | unsigned long flags; |
| 189 | int i, j; |
| 190 | |
| 191 | local_irq_save(flags); |
| 192 | /* Check up to 32K in 4K increments */ |
| 193 | for (i = 0; i < 8; i++) { |
| 194 | volatile unsigned short *m = (unsigned short *) (membase + (i * 0x1000)); |
| 195 | |
| 196 | /* Unwriteable - we have a fully decoded card and the |
| 197 | RAM end located */ |
| 198 | if (hwreg_present(m) == 0) |
| 199 | break; |
| 200 | |
| 201 | /* write a distinctive byte */ |
| 202 | *m = 0xA5A0 | i; |
| 203 | /* check that we read back what we wrote */ |
| 204 | if (*m != (0xA5A0 | i)) |
| 205 | break; |
| 206 | |
| 207 | /* check for partial decode and wrap */ |
| 208 | for (j = 0; j < i; j++) { |
| 209 | volatile unsigned short *p = (unsigned short *) (membase + (j * 0x1000)); |
| 210 | if (*p != (0xA5A0 | j)) |
| 211 | break; |
| 212 | } |
| 213 | } |
| 214 | local_irq_restore(flags); |
| 215 | /* in any case, we stopped once we tried one block too many, |
| 216 | or once we reached 32K */ |
| 217 | return i * 0x1000; |
| 218 | } |
| 219 | |
| 220 | struct net_device * __init mac8390_probe(int unit) |
| 221 | { |
| 222 | struct net_device *dev; |
| 223 | volatile unsigned short *i; |
| 224 | int version_disp = 0; |
| 225 | struct nubus_dev * ndev = NULL; |
| 226 | int err = -ENODEV; |
| 227 | |
| 228 | struct nubus_dir dir; |
| 229 | struct nubus_dirent ent; |
| 230 | int offset; |
| 231 | static unsigned int slots; |
| 232 | |
| 233 | enum mac8390_type cardtype; |
| 234 | |
| 235 | /* probably should check for Nubus instead */ |
| 236 | |
| 237 | if (!MACH_IS_MAC) |
| 238 | return ERR_PTR(-ENODEV); |
| 239 | |
| 240 | dev = alloc_ei_netdev(); |
| 241 | if (!dev) |
| 242 | return ERR_PTR(-ENOMEM); |
| 243 | |
| 244 | if (unit >= 0) |
| 245 | sprintf(dev->name, "eth%d", unit); |
| 246 | |
| 247 | SET_MODULE_OWNER(dev); |
| 248 | |
| 249 | while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK, NUBUS_TYPE_ETHERNET, ndev))) { |
| 250 | /* Have we seen it already? */ |
| 251 | if (slots & (1<<ndev->board->slot)) |
| 252 | continue; |
| 253 | slots |= 1<<ndev->board->slot; |
| 254 | |
| 255 | if ((cardtype = mac8390_ident(ndev)) == MAC8390_NONE) |
| 256 | continue; |
| 257 | |
| 258 | if (version_disp == 0) { |
| 259 | version_disp = 1; |
| 260 | printk(version); |
| 261 | } |
| 262 | |
| 263 | dev->irq = SLOT2IRQ(ndev->board->slot); |
| 264 | /* This is getting to be a habit */ |
| 265 | dev->base_addr = ndev->board->slot_addr | ((ndev->board->slot&0xf) << 20); |
| 266 | |
| 267 | /* Get some Nubus info - we will trust the card's idea |
| 268 | of where its memory and registers are. */ |
| 269 | |
| 270 | if (nubus_get_func_dir(ndev, &dir) == -1) { |
| 271 | printk(KERN_ERR "%s: Unable to get Nubus functional" |
| 272 | " directory for slot %X!\n", |
| 273 | dev->name, ndev->board->slot); |
| 274 | continue; |
| 275 | } |
| 276 | |
| 277 | /* Get the MAC address */ |
| 278 | if ((nubus_find_rsrc(&dir, NUBUS_RESID_MAC_ADDRESS, &ent)) == -1) { |
| 279 | printk(KERN_INFO "%s: Couldn't get MAC address!\n", |
| 280 | dev->name); |
| 281 | continue; |
| 282 | } else { |
| 283 | nubus_get_rsrc_mem(dev->dev_addr, &ent, 6); |
| 284 | /* Some Sonic Sys cards masquerade as Farallon */ |
| 285 | if (cardtype == MAC8390_FARALLON && |
| 286 | dev->dev_addr[0] == 0x0 && |
| 287 | dev->dev_addr[1] == 0x40 && |
| 288 | dev->dev_addr[2] == 0x10) { |
| 289 | /* This is really Sonic Sys card */ |
| 290 | cardtype = MAC8390_SONICSYS; |
| 291 | } |
| 292 | } |
| 293 | |
| 294 | if (useresources[cardtype] == 1) { |
| 295 | nubus_rewinddir(&dir); |
| 296 | if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_BASEOS, &ent) == -1) { |
| 297 | printk(KERN_ERR "%s: Memory offset resource" |
| 298 | " for slot %X not found!\n", |
| 299 | dev->name, ndev->board->slot); |
| 300 | continue; |
| 301 | } |
| 302 | nubus_get_rsrc_mem(&offset, &ent, 4); |
| 303 | dev->mem_start = dev->base_addr + offset; |
| 304 | /* yes, this is how the Apple driver does it */ |
| 305 | dev->base_addr = dev->mem_start + 0x10000; |
| 306 | nubus_rewinddir(&dir); |
| 307 | if (nubus_find_rsrc(&dir, NUBUS_RESID_MINOR_LENGTH, &ent) == -1) { |
| 308 | printk(KERN_INFO "%s: Memory length resource" |
| 309 | " for slot %X not found" |
| 310 | ", probing\n", |
| 311 | dev->name, ndev->board->slot); |
| 312 | offset = mac8390_memsize(dev->mem_start); |
| 313 | } else { |
| 314 | nubus_get_rsrc_mem(&offset, &ent, 4); |
| 315 | } |
| 316 | dev->mem_end = dev->mem_start + offset; |
| 317 | } else { |
| 318 | switch (cardtype) { |
| 319 | case MAC8390_KINETICS: |
| 320 | case MAC8390_DAYNA: /* it's the same */ |
| 321 | dev->base_addr = |
| 322 | (int)(ndev->board->slot_addr + |
| 323 | DAYNA_8390_BASE); |
| 324 | dev->mem_start = |
| 325 | (int)(ndev->board->slot_addr + |
| 326 | DAYNA_8390_MEM); |
| 327 | dev->mem_end = |
| 328 | dev->mem_start + |
| 329 | mac8390_memsize(dev->mem_start); |
| 330 | break; |
| 331 | case MAC8390_CABLETRON: |
| 332 | dev->base_addr = |
| 333 | (int)(ndev->board->slot_addr + |
| 334 | CABLETRON_8390_BASE); |
| 335 | dev->mem_start = |
| 336 | (int)(ndev->board->slot_addr + |
| 337 | CABLETRON_8390_MEM); |
| 338 | /* The base address is unreadable if 0x00 |
| 339 | * has been written to the command register |
| 340 | * Reset the chip by writing E8390_NODMA + |
| 341 | * E8390_PAGE0 + E8390_STOP just to be |
| 342 | * sure |
| 343 | */ |
| 344 | i = (void *)dev->base_addr; |
| 345 | *i = 0x21; |
| 346 | dev->mem_end = |
| 347 | dev->mem_start + |
| 348 | mac8390_memsize(dev->mem_start); |
| 349 | break; |
| 350 | |
| 351 | default: |
| 352 | printk(KERN_ERR "Card type %s is" |
| 353 | " unsupported, sorry\n", |
| 354 | cardname[cardtype]); |
| 355 | continue; |
| 356 | } |
| 357 | } |
| 358 | |
| 359 | /* Do the nasty 8390 stuff */ |
| 360 | if (!mac8390_initdev(dev, ndev, cardtype)) |
| 361 | break; |
| 362 | } |
| 363 | |
| 364 | if (!ndev) |
| 365 | goto out; |
| 366 | err = register_netdev(dev); |
| 367 | if (err) |
| 368 | goto out; |
| 369 | return dev; |
| 370 | |
| 371 | out: |
| 372 | free_netdev(dev); |
| 373 | return ERR_PTR(err); |
| 374 | } |
| 375 | |
| 376 | #ifdef MODULE |
| 377 | MODULE_AUTHOR("David Huggins-Daines <dhd@debian.org> and others"); |
| 378 | MODULE_DESCRIPTION("Macintosh NS8390-based Nubus Ethernet driver"); |
| 379 | MODULE_LICENSE("GPL"); |
| 380 | |
| 381 | /* overkill, of course */ |
| 382 | static struct net_device *dev_mac8390[15]; |
| 383 | int init_module(void) |
| 384 | { |
| 385 | int i; |
| 386 | for (i = 0; i < 15; i++) { |
| 387 | struct net_device *dev = mac8390_probe(-1); |
| 388 | if (IS_ERR(dev)) |
| 389 | break; |
| 390 | dev_mac890[i] = dev; |
| 391 | } |
| 392 | if (!i) { |
| 393 | printk(KERN_NOTICE "mac8390.c: No useable cards found, driver NOT installed.\n"); |
| 394 | return -ENODEV; |
| 395 | } |
| 396 | return 0; |
| 397 | } |
| 398 | |
| 399 | void cleanup_module(void) |
| 400 | { |
| 401 | int i; |
| 402 | for (i = 0; i < 15; i++) { |
| 403 | struct net_device *dev = dev_mac890[i]; |
| 404 | if (dev) { |
| 405 | unregister_netdev(dev); |
| 406 | free_netdev(dev); |
| 407 | } |
| 408 | } |
| 409 | } |
| 410 | |
| 411 | #endif /* MODULE */ |
| 412 | |
| 413 | static int __init mac8390_initdev(struct net_device * dev, struct nubus_dev * ndev, |
| 414 | enum mac8390_type type) |
| 415 | { |
| 416 | static u32 fwrd4_offsets[16]={ |
| 417 | 0, 4, 8, 12, |
| 418 | 16, 20, 24, 28, |
| 419 | 32, 36, 40, 44, |
| 420 | 48, 52, 56, 60 |
| 421 | }; |
| 422 | static u32 back4_offsets[16]={ |
| 423 | 60, 56, 52, 48, |
| 424 | 44, 40, 36, 32, |
| 425 | 28, 24, 20, 16, |
| 426 | 12, 8, 4, 0 |
| 427 | }; |
| 428 | static u32 fwrd2_offsets[16]={ |
| 429 | 0, 2, 4, 6, |
| 430 | 8, 10, 12, 14, |
| 431 | 16, 18, 20, 22, |
| 432 | 24, 26, 28, 30 |
| 433 | }; |
| 434 | |
| 435 | int access_bitmode; |
| 436 | |
| 437 | /* Now fill in our stuff */ |
| 438 | dev->open = &mac8390_open; |
| 439 | dev->stop = &mac8390_close; |
| 440 | #ifdef CONFIG_NET_POLL_CONTROLLER |
| 441 | dev->poll_controller = ei_poll; |
| 442 | #endif |
| 443 | |
| 444 | /* GAR, ei_status is actually a macro even though it looks global */ |
| 445 | ei_status.name = cardname[type]; |
| 446 | ei_status.word16 = word16[type]; |
| 447 | |
| 448 | /* Cabletron's TX/RX buffers are backwards */ |
| 449 | if (type == MAC8390_CABLETRON) { |
| 450 | ei_status.tx_start_page = CABLETRON_TX_START_PG; |
| 451 | ei_status.rx_start_page = CABLETRON_RX_START_PG; |
| 452 | ei_status.stop_page = CABLETRON_RX_STOP_PG; |
| 453 | ei_status.rmem_start = dev->mem_start; |
| 454 | ei_status.rmem_end = dev->mem_start + CABLETRON_RX_STOP_PG*256; |
| 455 | } else { |
| 456 | ei_status.tx_start_page = WD_START_PG; |
| 457 | ei_status.rx_start_page = WD_START_PG + TX_PAGES; |
| 458 | ei_status.stop_page = (dev->mem_end - dev->mem_start)/256; |
| 459 | ei_status.rmem_start = dev->mem_start + TX_PAGES*256; |
| 460 | ei_status.rmem_end = dev->mem_end; |
| 461 | } |
| 462 | |
| 463 | /* Fill in model-specific information and functions */ |
| 464 | switch(type) { |
| 465 | case MAC8390_SONICSYS: |
| 466 | /* 16 bit card, register map is reversed */ |
| 467 | ei_status.reset_8390 = &mac8390_no_reset; |
| 468 | ei_status.block_input = &slow_sane_block_input; |
| 469 | ei_status.block_output = &slow_sane_block_output; |
| 470 | ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; |
| 471 | ei_status.reg_offset = back4_offsets; |
| 472 | access_bitmode = 0; |
| 473 | break; |
| 474 | case MAC8390_FARALLON: |
| 475 | case MAC8390_APPLE: |
| 476 | case MAC8390_ASANTE: |
| 477 | case MAC8390_DAYNA2: |
| 478 | case MAC8390_DAYNA3: |
| 479 | /* 32 bit card, register map is reversed */ |
| 480 | /* sane */ |
| 481 | ei_status.reset_8390 = &mac8390_no_reset; |
| 482 | ei_status.block_input = &sane_block_input; |
| 483 | ei_status.block_output = &sane_block_output; |
| 484 | ei_status.get_8390_hdr = &sane_get_8390_hdr; |
| 485 | ei_status.reg_offset = back4_offsets; |
| 486 | access_bitmode = 1; |
| 487 | break; |
| 488 | case MAC8390_CABLETRON: |
| 489 | /* 16 bit card, register map is short forward */ |
| 490 | ei_status.reset_8390 = &mac8390_no_reset; |
| 491 | ei_status.block_input = &slow_sane_block_input; |
| 492 | ei_status.block_output = &slow_sane_block_output; |
| 493 | ei_status.get_8390_hdr = &slow_sane_get_8390_hdr; |
| 494 | ei_status.reg_offset = fwrd2_offsets; |
| 495 | access_bitmode = 0; |
| 496 | break; |
| 497 | case MAC8390_DAYNA: |
| 498 | case MAC8390_KINETICS: |
| 499 | /* 16 bit memory */ |
| 500 | /* dayna and similar */ |
| 501 | ei_status.reset_8390 = &mac8390_no_reset; |
| 502 | ei_status.block_input = &dayna_block_input; |
| 503 | ei_status.block_output = &dayna_block_output; |
| 504 | ei_status.get_8390_hdr = &dayna_get_8390_hdr; |
| 505 | ei_status.reg_offset = fwrd4_offsets; |
| 506 | access_bitmode = 0; |
| 507 | break; |
| 508 | default: |
| 509 | printk(KERN_ERR "Card type %s is unsupported, sorry\n", cardname[type]); |
| 510 | return -ENODEV; |
| 511 | } |
| 512 | |
| 513 | NS8390_init(dev, 0); |
| 514 | |
| 515 | /* Good, done, now spit out some messages */ |
| 516 | printk(KERN_INFO "%s: %s in slot %X (type %s)\n", |
| 517 | dev->name, ndev->board->name, ndev->board->slot, cardname[type]); |
| 518 | printk(KERN_INFO "MAC "); |
| 519 | { |
| 520 | int i; |
| 521 | for (i = 0; i < 6; i++) { |
| 522 | printk("%2.2x", dev->dev_addr[i]); |
| 523 | if (i < 5) |
| 524 | printk(":"); |
| 525 | } |
| 526 | } |
| 527 | printk(" IRQ %d, shared memory at %#lx-%#lx, %d-bit access.\n", |
| 528 | dev->irq, dev->mem_start, dev->mem_end-1, |
| 529 | access_bitmode?32:16); |
| 530 | return 0; |
| 531 | } |
| 532 | |
| 533 | static int mac8390_open(struct net_device *dev) |
| 534 | { |
| 535 | ei_open(dev); |
| 536 | if (request_irq(dev->irq, ei_interrupt, 0, "8390 Ethernet", dev)) { |
| 537 | printk ("%s: unable to get IRQ %d.\n", dev->name, dev->irq); |
| 538 | return -EAGAIN; |
| 539 | } |
| 540 | return 0; |
| 541 | } |
| 542 | |
| 543 | static int mac8390_close(struct net_device *dev) |
| 544 | { |
| 545 | free_irq(dev->irq, dev); |
| 546 | ei_close(dev); |
| 547 | return 0; |
| 548 | } |
| 549 | |
| 550 | static void mac8390_no_reset(struct net_device *dev) |
| 551 | { |
| 552 | ei_status.txing = 0; |
| 553 | if (ei_debug > 1) |
| 554 | printk("reset not supported\n"); |
| 555 | return; |
| 556 | } |
| 557 | |
| 558 | /* dayna_memcpy_fromio/dayna_memcpy_toio */ |
| 559 | /* directly from daynaport.c by Alan Cox */ |
| 560 | static void dayna_memcpy_fromcard(struct net_device *dev, void *to, int from, int count) |
| 561 | { |
| 562 | volatile unsigned short *ptr; |
| 563 | unsigned short *target=to; |
| 564 | from<<=1; /* word, skip overhead */ |
| 565 | ptr=(unsigned short *)(dev->mem_start+from); |
| 566 | /* Leading byte? */ |
| 567 | if (from&2) { |
| 568 | *((char *)target)++ = *(((char *)ptr++)-1); |
| 569 | count--; |
| 570 | } |
| 571 | while(count>=2) |
| 572 | { |
| 573 | *target++=*ptr++; /* Copy and */ |
| 574 | ptr++; /* skip cruft */ |
| 575 | count-=2; |
| 576 | } |
| 577 | /* Trailing byte? */ |
| 578 | if(count) |
| 579 | { |
| 580 | /* Big endian */ |
| 581 | unsigned short v=*ptr; |
| 582 | *((char *)target)=v>>8; |
| 583 | } |
| 584 | } |
| 585 | |
| 586 | static void dayna_memcpy_tocard(struct net_device *dev, int to, const void *from, int count) |
| 587 | { |
| 588 | volatile unsigned short *ptr; |
| 589 | const unsigned short *src=from; |
| 590 | to<<=1; /* word, skip overhead */ |
| 591 | ptr=(unsigned short *)(dev->mem_start+to); |
| 592 | /* Leading byte? */ |
| 593 | if (to&2) { /* avoid a byte write (stomps on other data) */ |
| 594 | ptr[-1] = (ptr[-1]&0xFF00)|*((unsigned char *)src)++; |
| 595 | ptr++; |
| 596 | count--; |
| 597 | } |
| 598 | while(count>=2) |
| 599 | { |
| 600 | *ptr++=*src++; /* Copy and */ |
| 601 | ptr++; /* skip cruft */ |
| 602 | count-=2; |
| 603 | } |
| 604 | /* Trailing byte? */ |
| 605 | if(count) |
| 606 | { |
| 607 | /* Big endian */ |
| 608 | unsigned short v=*src; |
| 609 | /* card doesn't like byte writes */ |
| 610 | *ptr=(*ptr&0x00FF)|(v&0xFF00); |
| 611 | } |
| 612 | } |
| 613 | |
| 614 | /* sane block input/output */ |
| 615 | static void sane_get_8390_hdr(struct net_device *dev, |
| 616 | struct e8390_pkt_hdr *hdr, int ring_page) |
| 617 | { |
| 618 | unsigned long hdr_start = (ring_page - WD_START_PG)<<8; |
| 619 | memcpy_fromio((void *)hdr, (char *)dev->mem_start + hdr_start, 4); |
| 620 | /* Fix endianness */ |
| 621 | hdr->count = swab16(hdr->count); |
| 622 | } |
| 623 | |
| 624 | static void sane_block_input(struct net_device *dev, int count, |
| 625 | struct sk_buff *skb, int ring_offset) |
| 626 | { |
| 627 | unsigned long xfer_base = ring_offset - (WD_START_PG<<8); |
| 628 | unsigned long xfer_start = xfer_base + dev->mem_start; |
| 629 | |
| 630 | if (xfer_start + count > ei_status.rmem_end) { |
| 631 | /* We must wrap the input move. */ |
| 632 | int semi_count = ei_status.rmem_end - xfer_start; |
| 633 | memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, semi_count); |
| 634 | count -= semi_count; |
| 635 | memcpy_toio(skb->data + semi_count, (char *)ei_status.rmem_start, count); |
| 636 | } else { |
| 637 | memcpy_fromio(skb->data, (char *)dev->mem_start + xfer_base, count); |
| 638 | } |
| 639 | } |
| 640 | |
| 641 | static void sane_block_output(struct net_device *dev, int count, |
| 642 | const unsigned char *buf, int start_page) |
| 643 | { |
| 644 | long shmem = (start_page - WD_START_PG)<<8; |
| 645 | |
| 646 | memcpy_toio((char *)dev->mem_start + shmem, buf, count); |
| 647 | } |
| 648 | |
| 649 | /* dayna block input/output */ |
| 650 | static void dayna_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) |
| 651 | { |
| 652 | unsigned long hdr_start = (ring_page - WD_START_PG)<<8; |
| 653 | |
| 654 | dayna_memcpy_fromcard(dev, (void *)hdr, hdr_start, 4); |
| 655 | /* Fix endianness */ |
| 656 | hdr->count=(hdr->count&0xFF)<<8|(hdr->count>>8); |
| 657 | } |
| 658 | |
| 659 | static void dayna_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) |
| 660 | { |
| 661 | unsigned long xfer_base = ring_offset - (WD_START_PG<<8); |
| 662 | unsigned long xfer_start = xfer_base+dev->mem_start; |
| 663 | |
| 664 | /* Note the offset math is done in card memory space which is word |
| 665 | per long onto our space. */ |
| 666 | |
| 667 | if (xfer_start + count > ei_status.rmem_end) |
| 668 | { |
| 669 | /* We must wrap the input move. */ |
| 670 | int semi_count = ei_status.rmem_end - xfer_start; |
| 671 | dayna_memcpy_fromcard(dev, skb->data, xfer_base, semi_count); |
| 672 | count -= semi_count; |
| 673 | dayna_memcpy_fromcard(dev, skb->data + semi_count, |
| 674 | ei_status.rmem_start - dev->mem_start, |
| 675 | count); |
| 676 | } |
| 677 | else |
| 678 | { |
| 679 | dayna_memcpy_fromcard(dev, skb->data, xfer_base, count); |
| 680 | } |
| 681 | } |
| 682 | |
| 683 | static void dayna_block_output(struct net_device *dev, int count, const unsigned char *buf, |
| 684 | int start_page) |
| 685 | { |
| 686 | long shmem = (start_page - WD_START_PG)<<8; |
| 687 | |
| 688 | dayna_memcpy_tocard(dev, shmem, buf, count); |
| 689 | } |
| 690 | |
| 691 | /* Cabletron block I/O */ |
| 692 | static void slow_sane_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, |
| 693 | int ring_page) |
| 694 | { |
| 695 | unsigned long hdr_start = (ring_page - WD_START_PG)<<8; |
| 696 | word_memcpy_fromcard((void *)hdr, (char *)dev->mem_start+hdr_start, 4); |
| 697 | /* Register endianism - fix here rather than 8390.c */ |
| 698 | hdr->count = (hdr->count&0xFF)<<8|(hdr->count>>8); |
| 699 | } |
| 700 | |
| 701 | static void slow_sane_block_input(struct net_device *dev, int count, struct sk_buff *skb, |
| 702 | int ring_offset) |
| 703 | { |
| 704 | unsigned long xfer_base = ring_offset - (WD_START_PG<<8); |
| 705 | unsigned long xfer_start = xfer_base+dev->mem_start; |
| 706 | |
| 707 | if (xfer_start + count > ei_status.rmem_end) |
| 708 | { |
| 709 | /* We must wrap the input move. */ |
| 710 | int semi_count = ei_status.rmem_end - xfer_start; |
| 711 | word_memcpy_fromcard(skb->data, (char *)dev->mem_start + |
| 712 | xfer_base, semi_count); |
| 713 | count -= semi_count; |
| 714 | word_memcpy_fromcard(skb->data + semi_count, |
| 715 | (char *)ei_status.rmem_start, count); |
| 716 | } |
| 717 | else |
| 718 | { |
| 719 | word_memcpy_fromcard(skb->data, (char *)dev->mem_start + |
| 720 | xfer_base, count); |
| 721 | } |
| 722 | } |
| 723 | |
| 724 | static void slow_sane_block_output(struct net_device *dev, int count, const unsigned char *buf, |
| 725 | int start_page) |
| 726 | { |
| 727 | long shmem = (start_page - WD_START_PG)<<8; |
| 728 | |
| 729 | word_memcpy_tocard((char *)dev->mem_start + shmem, buf, count); |
| 730 | } |
| 731 | |
| 732 | static void word_memcpy_tocard(void *tp, const void *fp, int count) |
| 733 | { |
| 734 | volatile unsigned short *to = tp; |
| 735 | const unsigned short *from = fp; |
| 736 | |
| 737 | count++; |
| 738 | count/=2; |
| 739 | |
| 740 | while(count--) |
| 741 | *to++=*from++; |
| 742 | } |
| 743 | |
| 744 | static void word_memcpy_fromcard(void *tp, const void *fp, int count) |
| 745 | { |
| 746 | unsigned short *to = tp; |
| 747 | const volatile unsigned short *from = fp; |
| 748 | |
| 749 | count++; |
| 750 | count/=2; |
| 751 | |
| 752 | while(count--) |
| 753 | *to++=*from++; |
| 754 | } |
| 755 | |
| 756 | |