blob: 0663428a0e64754908bfb9f521222cad90ef2139 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * This file contains work-arounds for many known PCI hardware
3 * bugs. Devices present only on certain architectures (host
4 * bridges et cetera) should be handled in arch-specific code.
5 *
6 * Note: any quirks for hotpluggable devices must _NOT_ be declared __init.
7 *
8 * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
9 *
10 * The bridge optimization stuff has been removed. If you really
11 * have a silly BIOS which is unable to set your host bridge right,
12 * use the PowerTweak utility (see http://powertweak.sourceforge.net).
13 */
14
15#include <linux/config.h>
16#include <linux/types.h>
17#include <linux/kernel.h>
18#include <linux/pci.h>
19#include <linux/init.h>
20#include <linux/delay.h>
Len Brown25be5e62005-05-27 04:21:50 -040021#include <linux/acpi.h>
Greg KHbc56b9e2005-04-08 14:53:31 +090022#include "pci.h"
Linus Torvalds1da177e2005-04-16 15:20:36 -070023
24/* Deal with broken BIOS'es that neglect to enable passive release,
25 which can cause problems in combination with the 82441FX/PPro MTRRs */
26static void __devinit quirk_passive_release(struct pci_dev *dev)
27{
28 struct pci_dev *d = NULL;
29 unsigned char dlc;
30
31 /* We have to make sure a particular bit is set in the PIIX3
32 ISA bridge, so we have to go out and find it. */
33 while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) {
34 pci_read_config_byte(d, 0x82, &dlc);
35 if (!(dlc & 1<<1)) {
36 printk(KERN_ERR "PCI: PIIX3: Enabling Passive Release on %s\n", pci_name(d));
37 dlc |= 1<<1;
38 pci_write_config_byte(d, 0x82, dlc);
39 }
40 }
41}
42DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release );
43
44/* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround
45 but VIA don't answer queries. If you happen to have good contacts at VIA
46 ask them for me please -- Alan
47
48 This appears to be BIOS not version dependent. So presumably there is a
49 chipset level fix */
50int isa_dma_bridge_buggy; /* Exported */
51
52static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev)
53{
54 if (!isa_dma_bridge_buggy) {
55 isa_dma_bridge_buggy=1;
56 printk(KERN_INFO "Activating ISA DMA hang workarounds.\n");
57 }
58}
59 /*
60 * Its not totally clear which chipsets are the problematic ones
61 * We know 82C586 and 82C596 variants are affected.
62 */
63DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs );
64DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs );
65DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs );
66DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs );
67DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs );
68DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs );
69DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs );
70
71int pci_pci_problems;
72
73/*
74 * Chipsets where PCI->PCI transfers vanish or hang
75 */
76static void __devinit quirk_nopcipci(struct pci_dev *dev)
77{
78 if ((pci_pci_problems & PCIPCI_FAIL)==0) {
79 printk(KERN_INFO "Disabling direct PCI/PCI transfers.\n");
80 pci_pci_problems |= PCIPCI_FAIL;
81 }
82}
83DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci );
84DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci );
85
86/*
87 * Triton requires workarounds to be used by the drivers
88 */
89static void __devinit quirk_triton(struct pci_dev *dev)
90{
91 if ((pci_pci_problems&PCIPCI_TRITON)==0) {
92 printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n");
93 pci_pci_problems |= PCIPCI_TRITON;
94 }
95}
96DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton );
97DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton );
98DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton );
99DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton );
100
101/*
102 * VIA Apollo KT133 needs PCI latency patch
103 * Made according to a windows driver based patch by George E. Breese
104 * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
105 * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
106 * the info on which Mr Breese based his work.
107 *
108 * Updated based on further information from the site and also on
109 * information provided by VIA
110 */
111static void __devinit quirk_vialatency(struct pci_dev *dev)
112{
113 struct pci_dev *p;
114 u8 rev;
115 u8 busarb;
116 /* Ok we have a potential problem chipset here. Now see if we have
117 a buggy southbridge */
118
119 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL);
120 if (p!=NULL) {
121 pci_read_config_byte(p, PCI_CLASS_REVISION, &rev);
122 /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */
123 /* Check for buggy part revisions */
124 if (rev < 0x40 || rev > 0x42)
125 goto exit;
126 } else {
127 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
128 if (p==NULL) /* No problem parts */
129 goto exit;
130 pci_read_config_byte(p, PCI_CLASS_REVISION, &rev);
131 /* Check for buggy part revisions */
132 if (rev < 0x10 || rev > 0x12)
133 goto exit;
134 }
135
136 /*
137 * Ok we have the problem. Now set the PCI master grant to
138 * occur every master grant. The apparent bug is that under high
139 * PCI load (quite common in Linux of course) you can get data
140 * loss when the CPU is held off the bus for 3 bus master requests
141 * This happens to include the IDE controllers....
142 *
143 * VIA only apply this fix when an SB Live! is present but under
144 * both Linux and Windows this isnt enough, and we have seen
145 * corruption without SB Live! but with things like 3 UDMA IDE
146 * controllers. So we ignore that bit of the VIA recommendation..
147 */
148
149 pci_read_config_byte(dev, 0x76, &busarb);
150 /* Set bit 4 and bi 5 of byte 76 to 0x01
151 "Master priority rotation on every PCI master grant */
152 busarb &= ~(1<<5);
153 busarb |= (1<<4);
154 pci_write_config_byte(dev, 0x76, busarb);
155 printk(KERN_INFO "Applying VIA southbridge workaround.\n");
156exit:
157 pci_dev_put(p);
158}
159DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency );
160DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency );
161DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency );
162
163/*
164 * VIA Apollo VP3 needs ETBF on BT848/878
165 */
166static void __devinit quirk_viaetbf(struct pci_dev *dev)
167{
168 if ((pci_pci_problems&PCIPCI_VIAETBF)==0) {
169 printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n");
170 pci_pci_problems |= PCIPCI_VIAETBF;
171 }
172}
173DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf );
174
175static void __devinit quirk_vsfx(struct pci_dev *dev)
176{
177 if ((pci_pci_problems&PCIPCI_VSFX)==0) {
178 printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n");
179 pci_pci_problems |= PCIPCI_VSFX;
180 }
181}
182DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx );
183
184/*
185 * Ali Magik requires workarounds to be used by the drivers
186 * that DMA to AGP space. Latency must be set to 0xA and triton
187 * workaround applied too
188 * [Info kindly provided by ALi]
189 */
190static void __init quirk_alimagik(struct pci_dev *dev)
191{
192 if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) {
193 printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n");
194 pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON;
195 }
196}
197DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik );
198DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik );
199
200/*
201 * Natoma has some interesting boundary conditions with Zoran stuff
202 * at least
203 */
204static void __devinit quirk_natoma(struct pci_dev *dev)
205{
206 if ((pci_pci_problems&PCIPCI_NATOMA)==0) {
207 printk(KERN_INFO "Limiting direct PCI/PCI transfers.\n");
208 pci_pci_problems |= PCIPCI_NATOMA;
209 }
210}
211DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma );
212DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma );
213DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma );
214DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma );
215DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma );
216DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma );
217
218/*
219 * This chip can cause PCI parity errors if config register 0xA0 is read
220 * while DMAs are occurring.
221 */
222static void __devinit quirk_citrine(struct pci_dev *dev)
223{
224 dev->cfg_size = 0xA0;
225}
226DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine );
227
228/*
229 * S3 868 and 968 chips report region size equal to 32M, but they decode 64M.
230 * If it's needed, re-allocate the region.
231 */
232static void __devinit quirk_s3_64M(struct pci_dev *dev)
233{
234 struct resource *r = &dev->resource[0];
235
236 if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) {
237 r->start = 0;
238 r->end = 0x3ffffff;
239 }
240}
241DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M );
242DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M );
243
Linus Torvalds6693e742005-10-25 20:40:09 -0700244static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
245 unsigned size, int nr, const char *name)
Linus Torvalds1da177e2005-04-16 15:20:36 -0700246{
247 region &= ~(size-1);
248 if (region) {
David S. Miller085ae412005-08-08 13:19:08 -0700249 struct pci_bus_region bus_region;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700250 struct resource *res = dev->resource + nr;
251
252 res->name = pci_name(dev);
253 res->start = region;
254 res->end = region + size - 1;
255 res->flags = IORESOURCE_IO;
David S. Miller085ae412005-08-08 13:19:08 -0700256
257 /* Convert from PCI bus to resource space. */
258 bus_region.start = res->start;
259 bus_region.end = res->end;
260 pcibios_bus_to_resource(dev, res, &bus_region);
261
Linus Torvalds1da177e2005-04-16 15:20:36 -0700262 pci_claim_resource(dev, nr);
Linus Torvalds6693e742005-10-25 20:40:09 -0700263 printk("PCI quirk: region %04x-%04x claimed by %s\n", region, region + size - 1, name);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700264 }
265}
266
267/*
268 * ATI Northbridge setups MCE the processor if you even
269 * read somewhere between 0x3b0->0x3bb or read 0x3d3
270 */
271static void __devinit quirk_ati_exploding_mce(struct pci_dev *dev)
272{
273 printk(KERN_INFO "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb.\n");
274 /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */
275 request_region(0x3b0, 0x0C, "RadeonIGP");
276 request_region(0x3d3, 0x01, "RadeonIGP");
277}
278DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce );
279
280/*
281 * Let's make the southbridge information explicit instead
282 * of having to worry about people probing the ACPI areas,
283 * for example.. (Yes, it happens, and if you read the wrong
284 * ACPI register it will put the machine to sleep with no
285 * way of waking it up again. Bummer).
286 *
287 * ALI M7101: Two IO regions pointed to by words at
288 * 0xE0 (64 bytes of ACPI registers)
289 * 0xE2 (32 bytes of SMB registers)
290 */
291static void __devinit quirk_ali7101_acpi(struct pci_dev *dev)
292{
293 u16 region;
294
295 pci_read_config_word(dev, 0xE0, &region);
Linus Torvalds6693e742005-10-25 20:40:09 -0700296 quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700297 pci_read_config_word(dev, 0xE2, &region);
Linus Torvalds6693e742005-10-25 20:40:09 -0700298 quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700299}
300DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi );
301
Linus Torvalds6693e742005-10-25 20:40:09 -0700302static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
303{
304 u32 devres;
305 u32 mask, size, base;
306
307 pci_read_config_dword(dev, port, &devres);
308 if ((devres & enable) != enable)
309 return;
310 mask = (devres >> 16) & 15;
311 base = devres & 0xffff;
312 size = 16;
313 for (;;) {
314 unsigned bit = size >> 1;
315 if ((bit & mask) == bit)
316 break;
317 size = bit;
318 }
319 /*
320 * For now we only print it out. Eventually we'll want to
321 * reserve it (at least if it's in the 0x1000+ range), but
322 * let's get enough confirmation reports first.
323 */
324 base &= -size;
325 printk("%s PIO at %04x-%04x\n", name, base, base + size - 1);
326}
327
328static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
329{
330 u32 devres;
331 u32 mask, size, base;
332
333 pci_read_config_dword(dev, port, &devres);
334 if ((devres & enable) != enable)
335 return;
336 base = devres & 0xffff0000;
337 mask = (devres & 0x3f) << 16;
338 size = 128 << 16;
339 for (;;) {
340 unsigned bit = size >> 1;
341 if ((bit & mask) == bit)
342 break;
343 size = bit;
344 }
345 /*
346 * For now we only print it out. Eventually we'll want to
347 * reserve it, but let's get enough confirmation reports first.
348 */
349 base &= -size;
350 printk("%s MMIO at %04x-%04x\n", name, base, base + size - 1);
351}
352
Linus Torvalds1da177e2005-04-16 15:20:36 -0700353/*
354 * PIIX4 ACPI: Two IO regions pointed to by longwords at
355 * 0x40 (64 bytes of ACPI registers)
356 * 0x90 (32 bytes of SMB registers)
Linus Torvalds6693e742005-10-25 20:40:09 -0700357 * and a few strange programmable PIIX4 device resources.
Linus Torvalds1da177e2005-04-16 15:20:36 -0700358 */
359static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
360{
Linus Torvalds6693e742005-10-25 20:40:09 -0700361 u32 region, res_a;
Linus Torvalds1da177e2005-04-16 15:20:36 -0700362
363 pci_read_config_dword(dev, 0x40, &region);
Linus Torvalds6693e742005-10-25 20:40:09 -0700364 quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700365 pci_read_config_dword(dev, 0x90, &region);
Linus Torvalds6693e742005-10-25 20:40:09 -0700366 quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
367
368 /* Device resource A has enables for some of the other ones */
369 pci_read_config_dword(dev, 0x5c, &res_a);
370
371 piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21);
372 piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21);
373
374 /* Device resource D is just bitfields for static resources */
375
376 /* Device 12 enabled? */
377 if (res_a & (1 << 29)) {
378 piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20);
379 piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7);
380 }
381 /* Device 13 enabled? */
382 if (res_a & (1 << 30)) {
383 piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20);
384 piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7);
385 }
386 piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20);
387 piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700388}
389DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi );
390
391/*
392 * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
393 * 0x40 (128 bytes of ACPI, GPIO & TCO registers)
394 * 0x58 (64 bytes of GPIO I/O space)
395 */
396static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev)
397{
398 u32 region;
399
400 pci_read_config_dword(dev, 0x40, &region);
Linus Torvalds6693e742005-10-25 20:40:09 -0700401 quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700402
403 pci_read_config_dword(dev, 0x58, &region);
Linus Torvalds6693e742005-10-25 20:40:09 -0700404 quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700405}
406DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi );
407DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi );
408DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi );
409DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi );
410DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi );
411DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi );
412DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi );
413DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi );
414DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi );
R.Marek@sh.cvut.cz3aa8c4f2005-04-21 10:49:06 +0000415DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi );
Linus Torvalds1da177e2005-04-16 15:20:36 -0700416
R.Marek@sh.cvut.cz2cea7522005-09-27 21:54:51 +0000417static void __devinit quirk_ich6_lpc_acpi(struct pci_dev *dev)
418{
419 u32 region;
420
421 pci_read_config_dword(dev, 0x40, &region);
422 quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH6 ACPI/GPIO/TCO");
423
424 pci_read_config_dword(dev, 0x48, &region);
425 quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO");
426}
427DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc_acpi );
428
Linus Torvalds1da177e2005-04-16 15:20:36 -0700429/*
430 * VIA ACPI: One IO region pointed to by longword at
431 * 0x48 or 0x20 (256 bytes of ACPI registers)
432 */
433static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev)
434{
435 u8 rev;
436 u32 region;
437
438 pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
439 if (rev & 0x10) {
440 pci_read_config_dword(dev, 0x48, &region);
441 region &= PCI_BASE_ADDRESS_IO_MASK;
Linus Torvalds6693e742005-10-25 20:40:09 -0700442 quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700443 }
444}
445DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi );
446
447/*
448 * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at
449 * 0x48 (256 bytes of ACPI registers)
450 * 0x70 (128 bytes of hardware monitoring register)
451 * 0x90 (16 bytes of SMB registers)
452 */
453static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev)
454{
455 u16 hm;
456 u32 smb;
457
458 quirk_vt82c586_acpi(dev);
459
460 pci_read_config_word(dev, 0x70, &hm);
461 hm &= PCI_BASE_ADDRESS_IO_MASK;
Linus Torvalds6693e742005-10-25 20:40:09 -0700462 quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c868 HW-mon");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700463
464 pci_read_config_dword(dev, 0x90, &smb);
465 smb &= PCI_BASE_ADDRESS_IO_MASK;
Linus Torvalds6693e742005-10-25 20:40:09 -0700466 quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c868 SMB");
Linus Torvalds1da177e2005-04-16 15:20:36 -0700467}
468DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi );
469
Ivan Kokshaysky6d85f292005-08-08 12:55:54 +0400470/*
471 * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at
472 * 0x88 (128 bytes of power management registers)
473 * 0xd0 (16 bytes of SMB registers)
474 */
475static void __devinit quirk_vt8235_acpi(struct pci_dev *dev)
476{
477 u16 pm, smb;
478
479 pci_read_config_word(dev, 0x88, &pm);
480 pm &= PCI_BASE_ADDRESS_IO_MASK;
Linus Torvalds6693e742005-10-25 20:40:09 -0700481 quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM");
Ivan Kokshaysky6d85f292005-08-08 12:55:54 +0400482
483 pci_read_config_word(dev, 0xd0, &smb);
484 smb &= PCI_BASE_ADDRESS_IO_MASK;
Linus Torvalds6693e742005-10-25 20:40:09 -0700485 quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB");
Ivan Kokshaysky6d85f292005-08-08 12:55:54 +0400486}
487DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
488
Linus Torvalds1da177e2005-04-16 15:20:36 -0700489
490#ifdef CONFIG_X86_IO_APIC
491
492#include <asm/io_apic.h>
493
494/*
495 * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip
496 * devices to the external APIC.
497 *
498 * TODO: When we have device-specific interrupt routers,
499 * this code will go away from quirks.
500 */
501static void __devinit quirk_via_ioapic(struct pci_dev *dev)
502{
503 u8 tmp;
504
505 if (nr_ioapics < 1)
506 tmp = 0; /* nothing routed to external APIC */
507 else
508 tmp = 0x1f; /* all known bits (4-0) routed to external APIC */
509
510 printk(KERN_INFO "PCI: %sbling Via external APIC routing\n",
511 tmp == 0 ? "Disa" : "Ena");
512
513 /* Offset 0x58: External APIC IRQ output control */
514 pci_write_config_byte (dev, 0x58, tmp);
515}
516DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic );
517
518/*
Karsten Wiesea1740912005-09-03 15:56:33 -0700519 * VIA 8237: Some BIOSs don't set the 'Bypass APIC De-Assert Message' Bit.
520 * This leads to doubled level interrupt rates.
521 * Set this bit to get rid of cycle wastage.
522 * Otherwise uncritical.
523 */
524static void __devinit quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
525{
526 u8 misc_control2;
527#define BYPASS_APIC_DEASSERT 8
528
529 pci_read_config_byte(dev, 0x5B, &misc_control2);
530 if (!(misc_control2 & BYPASS_APIC_DEASSERT)) {
531 printk(KERN_INFO "PCI: Bypassing VIA 8237 APIC De-Assert Message\n");
532 pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT);
533 }
534}
535DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
536
537/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700538 * The AMD io apic can hang the box when an apic irq is masked.
539 * We check all revs >= B0 (yet not in the pre production!) as the bug
540 * is currently marked NoFix
541 *
542 * We have multiple reports of hangs with this chipset that went away with
543 * noapic specified. For the moment we assume its the errata. We may be wrong
544 * of course. However the advice is demonstrably good even if so..
545 */
546static void __devinit quirk_amd_ioapic(struct pci_dev *dev)
547{
548 u8 rev;
549
550 pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
551 if (rev >= 0x02) {
552 printk(KERN_WARNING "I/O APIC: AMD Errata #22 may be present. In the event of instability try\n");
553 printk(KERN_WARNING " : booting with the \"noapic\" option.\n");
554 }
555}
556DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic );
557
558static void __init quirk_ioapic_rmw(struct pci_dev *dev)
559{
560 if (dev->devfn == 0 && dev->bus->number == 0)
561 sis_apic_bug = 1;
562}
563DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw );
564
565int pci_msi_quirk;
566
567#define AMD8131_revA0 0x01
568#define AMD8131_revB0 0x11
569#define AMD8131_MISC 0x40
570#define AMD8131_NIOAMODE_BIT 0
571static void __init quirk_amd_8131_ioapic(struct pci_dev *dev)
572{
573 unsigned char revid, tmp;
574
575 pci_msi_quirk = 1;
576 printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n");
577
578 if (nr_ioapics == 0)
579 return;
580
581 pci_read_config_byte(dev, PCI_REVISION_ID, &revid);
582 if (revid == AMD8131_revA0 || revid == AMD8131_revB0) {
583 printk(KERN_INFO "Fixing up AMD8131 IOAPIC mode\n");
584 pci_read_config_byte( dev, AMD8131_MISC, &tmp);
585 tmp &= ~(1 << AMD8131_NIOAMODE_BIT);
586 pci_write_config_byte( dev, AMD8131_MISC, tmp);
587 }
588}
589DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, quirk_amd_8131_ioapic );
590
Narendra Sankar1e062762005-05-06 12:00:05 -0700591static void __init quirk_svw_msi(struct pci_dev *dev)
592{
593 pci_msi_quirk = 1;
594 printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n");
595}
596DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi );
Linus Torvalds1da177e2005-04-16 15:20:36 -0700597#endif /* CONFIG_X86_IO_APIC */
598
599
600/*
Linus Torvalds1da177e2005-04-16 15:20:36 -0700601 * FIXME: it is questionable that quirk_via_acpi
602 * is needed. It shows up as an ISA bridge, and does not
603 * support the PCI_INTERRUPT_LINE register at all. Therefore
604 * it seems like setting the pci_dev's 'irq' to the
605 * value of the ACPI SCI interrupt is only done for convenience.
606 * -jgarzik
607 */
608static void __devinit quirk_via_acpi(struct pci_dev *d)
609{
610 /*
611 * VIA ACPI device: SCI IRQ line in PCI config byte 0x42
612 */
613 u8 irq;
614 pci_read_config_byte(d, 0x42, &irq);
615 irq &= 0xf;
616 if (irq && (irq != 2))
617 d->irq = irq;
618}
619DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi );
620DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi );
621
Bjorn Helgaas93cffffa2005-06-07 13:22:18 -0700622/*
623 * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
624 * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
625 * when written, it makes an internal connection to the PIC.
626 * For these devices, this register is defined to be 4 bits wide.
627 * Normally this is fine. However for IO-APIC motherboards, or
628 * non-x86 architectures (yes Via exists on PPC among other places),
629 * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
630 * interrupts delivered properly.
631 */
632static void quirk_via_irq(struct pci_dev *dev)
Len Brown25be5e62005-05-27 04:21:50 -0400633{
634 u8 irq, new_irq;
635
Len Brown25be5e62005-05-27 04:21:50 -0400636 new_irq = dev->irq & 0xf;
637 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
638 if (new_irq != irq) {
Bjorn Helgaas93cffffa2005-06-07 13:22:18 -0700639 printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
Len Brown25be5e62005-05-27 04:21:50 -0400640 pci_name(dev), irq, new_irq);
641 udelay(15); /* unknown if delay really needed */
642 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
643 }
644}
Bjorn Helgaas93cffffa2005-06-07 13:22:18 -0700645DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
Len Brown25be5e62005-05-27 04:21:50 -0400646
Linus Torvalds1da177e2005-04-16 15:20:36 -0700647/*
648 * PIIX3 USB: We have to disable USB interrupts that are
649 * hardwired to PIRQD# and may be shared with an
650 * external device.
651 *
652 * Legacy Support Register (LEGSUP):
653 * bit13: USB PIRQ Enable (USBPIRQDEN),
654 * bit4: Trap/SMI On IRQ Enable (USBSMIEN).
655 *
656 * We mask out all r/wc bits, too.
657 */
658static void __devinit quirk_piix3_usb(struct pci_dev *dev)
659{
660 u16 legsup;
661
662 pci_read_config_word(dev, 0xc0, &legsup);
663 legsup &= 0x50ef;
664 pci_write_config_word(dev, 0xc0, legsup);
665}
666DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_2, quirk_piix3_usb );
667DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_2, quirk_piix3_usb );
668
669/*
670 * VIA VT82C598 has its device ID settable and many BIOSes
671 * set it to the ID of VT82C597 for backward compatibility.
672 * We need to switch it off to be able to recognize the real
673 * type of the chip.
674 */
675static void __devinit quirk_vt82c598_id(struct pci_dev *dev)
676{
677 pci_write_config_byte(dev, 0xfc, 0);
678 pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device);
679}
680DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id );
681
682/*
683 * CardBus controllers have a legacy base address that enables them
684 * to respond as i82365 pcmcia controllers. We don't want them to
685 * do this even if the Linux CardBus driver is not loaded, because
686 * the Linux i82365 driver does not (and should not) handle CardBus.
687 */
688static void __devinit quirk_cardbus_legacy(struct pci_dev *dev)
689{
690 if ((PCI_CLASS_BRIDGE_CARDBUS << 8) ^ dev->class)
691 return;
692 pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
693}
694DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_cardbus_legacy);
695
696/*
697 * Following the PCI ordering rules is optional on the AMD762. I'm not
698 * sure what the designers were smoking but let's not inhale...
699 *
700 * To be fair to AMD, it follows the spec by default, its BIOS people
701 * who turn it off!
702 */
703static void __devinit quirk_amd_ordering(struct pci_dev *dev)
704{
705 u32 pcic;
706 pci_read_config_dword(dev, 0x4C, &pcic);
707 if ((pcic&6)!=6) {
708 pcic |= 6;
709 printk(KERN_WARNING "BIOS failed to enable PCI standards compliance, fixing this error.\n");
710 pci_write_config_dword(dev, 0x4C, pcic);
711 pci_read_config_dword(dev, 0x84, &pcic);
712 pcic |= (1<<23); /* Required in this mode */
713 pci_write_config_dword(dev, 0x84, pcic);
714 }
715}
716DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering );
717
718/*
719 * DreamWorks provided workaround for Dunord I-3000 problem
720 *
721 * This card decodes and responds to addresses not apparently
722 * assigned to it. We force a larger allocation to ensure that
723 * nothing gets put too close to it.
724 */
725static void __devinit quirk_dunord ( struct pci_dev * dev )
726{
727 struct resource *r = &dev->resource [1];
728 r->start = 0;
729 r->end = 0xffffff;
730}
731DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord );
732
733/*
734 * i82380FB mobile docking controller: its PCI-to-PCI bridge
735 * is subtractive decoding (transparent), and does indicate this
736 * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80
737 * instead of 0x01.
738 */
739static void __devinit quirk_transparent_bridge(struct pci_dev *dev)
740{
741 dev->transparent = 1;
742}
743DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge );
744DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge );
745
746/*
747 * Common misconfiguration of the MediaGX/Geode PCI master that will
748 * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1
749 * datasheets found at http://www.national.com/ds/GX for info on what
750 * these bits do. <christer@weinigel.se>
751 */
752static void __init quirk_mediagx_master(struct pci_dev *dev)
753{
754 u8 reg;
755 pci_read_config_byte(dev, 0x41, &reg);
756 if (reg & 2) {
757 reg &= ~2;
758 printk(KERN_INFO "PCI: Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", reg);
759 pci_write_config_byte(dev, 0x41, reg);
760 }
761}
762DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
763
764/*
765 * As per PCI spec, ignore base address registers 0-3 of the IDE controllers
766 * running in Compatible mode (bits 0 and 2 in the ProgIf for primary and
767 * secondary channels respectively). If the device reports Compatible mode
768 * but does use BAR0-3 for address decoding, we assume that firmware has
769 * programmed these BARs with standard values (0x1f0,0x3f4 and 0x170,0x374).
770 * Exceptions (if they exist) must be handled in chip/architecture specific
771 * fixups.
772 *
773 * Note: for non x86 people. You may need an arch specific quirk to handle
774 * moving IDE devices to native mode as well. Some plug in card devices power
775 * up in compatible mode and assume the BIOS will adjust them.
776 *
777 * Q: should we load the 0x1f0,0x3f4 into the registers or zap them as
778 * we do now ? We don't want is pci_enable_device to come along
779 * and assign new resources. Both approaches work for that.
780 */
781static void __devinit quirk_ide_bases(struct pci_dev *dev)
782{
783 struct resource *res;
784 int first_bar = 2, last_bar = 0;
785
786 if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
787 return;
788
789 res = &dev->resource[0];
790
791 /* primary channel: ProgIf bit 0, BAR0, BAR1 */
792 if (!(dev->class & 1) && (res[0].flags || res[1].flags)) {
793 res[0].start = res[0].end = res[0].flags = 0;
794 res[1].start = res[1].end = res[1].flags = 0;
795 first_bar = 0;
796 last_bar = 1;
797 }
798
799 /* secondary channel: ProgIf bit 2, BAR2, BAR3 */
800 if (!(dev->class & 4) && (res[2].flags || res[3].flags)) {
801 res[2].start = res[2].end = res[2].flags = 0;
802 res[3].start = res[3].end = res[3].flags = 0;
803 last_bar = 3;
804 }
805
806 if (!last_bar)
807 return;
808
809 printk(KERN_INFO "PCI: Ignoring BAR%d-%d of IDE controller %s\n",
810 first_bar, last_bar, pci_name(dev));
811}
812DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_ide_bases);
813
814/*
815 * Ensure C0 rev restreaming is off. This is normally done by
816 * the BIOS but in the odd case it is not the results are corruption
817 * hence the presence of a Linux check
818 */
819static void __init quirk_disable_pxb(struct pci_dev *pdev)
820{
821 u16 config;
822 u8 rev;
823
824 pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
825 if (rev != 0x04) /* Only C0 requires this */
826 return;
827 pci_read_config_word(pdev, 0x40, &config);
828 if (config & (1<<6)) {
829 config &= ~(1<<6);
830 pci_write_config_word(pdev, 0x40, config);
831 printk(KERN_INFO "PCI: C0 revision 450NX. Disabling PCI restreaming.\n");
832 }
833}
834DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb );
835
Linus Torvalds1da177e2005-04-16 15:20:36 -0700836
837/*
838 * Serverworks CSB5 IDE does not fully support native mode
839 */
840static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev)
841{
842 u8 prog;
843 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
844 if (prog & 5) {
845 prog &= ~5;
846 pdev->class &= ~5;
847 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
848 /* need to re-assign BARs for compat mode */
849 quirk_ide_bases(pdev);
850 }
851}
852DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide );
853
854/*
855 * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
856 */
857static void __init quirk_ide_samemode(struct pci_dev *pdev)
858{
859 u8 prog;
860
861 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
862
863 if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) {
864 printk(KERN_INFO "PCI: IDE mode mismatch; forcing legacy mode\n");
865 prog &= ~5;
866 pdev->class &= ~5;
867 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
868 /* need to re-assign BARs for compat mode */
869 quirk_ide_bases(pdev);
870 }
871}
872DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
873
874/* This was originally an Alpha specific thing, but it really fits here.
875 * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
876 */
877static void __init quirk_eisa_bridge(struct pci_dev *dev)
878{
879 dev->class = PCI_CLASS_BRIDGE_EISA << 8;
880}
881DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge );
882
883/*
884 * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
885 * is not activated. The myth is that Asus said that they do not want the
886 * users to be irritated by just another PCI Device in the Win98 device
887 * manager. (see the file prog/hotplug/README.p4b in the lm_sensors
888 * package 2.7.0 for details)
889 *
890 * The SMBus PCI Device can be activated by setting a bit in the ICH LPC
891 * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
892 * becomes necessary to do this tweak in two steps -- I've chosen the Host
893 * bridge as trigger.
894 */
895static int __initdata asus_hides_smbus = 0;
896
897static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
898{
899 if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
900 if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB)
901 switch(dev->subsystem_device) {
Jean Delvarea00db372005-06-29 17:04:06 +0200902 case 0x8025: /* P4B-LX */
Linus Torvalds1da177e2005-04-16 15:20:36 -0700903 case 0x8070: /* P4B */
904 case 0x8088: /* P4B533 */
905 case 0x1626: /* L3C notebook */
906 asus_hides_smbus = 1;
907 }
908 if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB)
909 switch(dev->subsystem_device) {
910 case 0x80b1: /* P4GE-V */
911 case 0x80b2: /* P4PE */
912 case 0x8093: /* P4B533-V */
913 asus_hides_smbus = 1;
914 }
915 if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB)
916 switch(dev->subsystem_device) {
917 case 0x8030: /* P4T533 */
918 asus_hides_smbus = 1;
919 }
920 if (dev->device == PCI_DEVICE_ID_INTEL_7205_0)
921 switch (dev->subsystem_device) {
922 case 0x8070: /* P4G8X Deluxe */
923 asus_hides_smbus = 1;
924 }
925 if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
926 switch (dev->subsystem_device) {
927 case 0x1751: /* M2N notebook */
928 case 0x1821: /* M5N notebook */
929 asus_hides_smbus = 1;
930 }
931 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
932 switch (dev->subsystem_device) {
933 case 0x184b: /* W1N notebook */
934 case 0x186a: /* M6Ne notebook */
935 asus_hides_smbus = 1;
936 }
937 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
938 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
939 switch(dev->subsystem_device) {
940 case 0x088C: /* HP Compaq nc8000 */
941 case 0x0890: /* HP Compaq nc6000 */
942 asus_hides_smbus = 1;
943 }
944 if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
945 switch (dev->subsystem_device) {
946 case 0x12bc: /* HP D330L */
947 asus_hides_smbus = 1;
948 }
949 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) {
950 if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
951 switch(dev->subsystem_device) {
952 case 0x0001: /* Toshiba Satellite A40 */
953 asus_hides_smbus = 1;
954 }
Daniele Gaffurie96e2f12005-07-29 12:15:46 -0700955 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
956 switch(dev->subsystem_device) {
957 case 0x0001: /* Toshiba Tecra M2 */
958 asus_hides_smbus = 1;
959 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700960 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
961 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
962 switch(dev->subsystem_device) {
963 case 0xC00C: /* Samsung P35 notebook */
964 asus_hides_smbus = 1;
965 }
Rumen Ivanov Zarevc87f8832005-09-06 13:39:32 -0700966 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) {
967 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
968 switch(dev->subsystem_device) {
969 case 0x0058: /* Compaq Evo N620c */
970 asus_hides_smbus = 1;
971 }
Linus Torvalds1da177e2005-04-16 15:20:36 -0700972 }
973}
974DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge );
975DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge );
976DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge );
977DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge );
978DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge );
979DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge );
980DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge );
981
982static void __init asus_hides_smbus_lpc(struct pci_dev *dev)
983{
984 u16 val;
985
986 if (likely(!asus_hides_smbus))
987 return;
988
989 pci_read_config_word(dev, 0xF2, &val);
990 if (val & 0x8) {
991 pci_write_config_word(dev, 0xF2, val & (~0x8));
992 pci_read_config_word(dev, 0xF2, &val);
993 if (val & 0x8)
994 printk(KERN_INFO "PCI: i801 SMBus device continues to play 'hide and seek'! 0x%x\n", val);
995 else
996 printk(KERN_INFO "PCI: Enabled i801 SMBus device\n");
997 }
998}
999DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc );
1000DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc );
1001DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc );
1002DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc );
1003DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc );
1004
1005/*
1006 * SiS 96x south bridge: BIOS typically hides SMBus device...
1007 */
1008static void __init quirk_sis_96x_smbus(struct pci_dev *dev)
1009{
1010 u8 val = 0;
1011 printk(KERN_INFO "Enabling SiS 96x SMBus.\n");
1012 pci_read_config_byte(dev, 0x77, &val);
1013 pci_write_config_byte(dev, 0x77, val & ~0x10);
1014 pci_read_config_byte(dev, 0x77, &val);
1015}
1016
1017
1018#define UHCI_USBLEGSUP 0xc0 /* legacy support */
1019#define UHCI_USBCMD 0 /* command register */
1020#define UHCI_USBSTS 2 /* status register */
1021#define UHCI_USBINTR 4 /* interrupt register */
1022#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
1023#define UHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
1024#define UHCI_USBCMD_GRESET (1 << 2) /* Global reset */
1025#define UHCI_USBCMD_CONFIGURE (1 << 6) /* config semaphore */
1026#define UHCI_USBSTS_HALTED (1 << 5) /* HCHalted bit */
1027
1028#define OHCI_CONTROL 0x04
1029#define OHCI_CMDSTATUS 0x08
1030#define OHCI_INTRSTATUS 0x0c
1031#define OHCI_INTRENABLE 0x10
1032#define OHCI_INTRDISABLE 0x14
1033#define OHCI_OCR (1 << 3) /* ownership change request */
1034#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
1035#define OHCI_INTR_OC (1 << 30) /* ownership change */
1036
1037#define EHCI_HCC_PARAMS 0x08 /* extended capabilities */
1038#define EHCI_USBCMD 0 /* command register */
1039#define EHCI_USBCMD_RUN (1 << 0) /* RUN/STOP bit */
1040#define EHCI_USBSTS 4 /* status register */
1041#define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */
1042#define EHCI_USBINTR 8 /* interrupt register */
1043#define EHCI_USBLEGSUP 0 /* legacy support register */
1044#define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */
1045#define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */
1046#define EHCI_USBLEGCTLSTS 4 /* legacy control/status */
1047#define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */
1048
1049int usb_early_handoff __devinitdata = 0;
1050static int __init usb_handoff_early(char *str)
1051{
1052 usb_early_handoff = 1;
1053 return 0;
1054}
1055__setup("usb-handoff", usb_handoff_early);
1056
1057static void __devinit quirk_usb_handoff_uhci(struct pci_dev *pdev)
1058{
1059 unsigned long base = 0;
1060 int wait_time, delta;
1061 u16 val, sts;
1062 int i;
1063
1064 for (i = 0; i < PCI_ROM_RESOURCE; i++)
1065 if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
1066 base = pci_resource_start(pdev, i);
1067 break;
1068 }
1069
1070 if (!base)
1071 return;
1072
1073 /*
1074 * stop controller
1075 */
1076 sts = inw(base + UHCI_USBSTS);
1077 val = inw(base + UHCI_USBCMD);
1078 val &= ~(u16)(UHCI_USBCMD_RUN | UHCI_USBCMD_CONFIGURE);
1079 outw(val, base + UHCI_USBCMD);
1080
1081 /*
1082 * wait while it stops if it was running
1083 */
1084 if ((sts & UHCI_USBSTS_HALTED) == 0)
1085 {
1086 wait_time = 1000;
1087 delta = 100;
1088
1089 do {
1090 outw(0x1f, base + UHCI_USBSTS);
1091 udelay(delta);
1092 wait_time -= delta;
1093 val = inw(base + UHCI_USBSTS);
1094 if (val & UHCI_USBSTS_HALTED)
1095 break;
1096 } while (wait_time > 0);
1097 }
1098
1099 /*
1100 * disable interrupts & legacy support
1101 */
1102 outw(0, base + UHCI_USBINTR);
1103 outw(0x1f, base + UHCI_USBSTS);
1104 pci_read_config_word(pdev, UHCI_USBLEGSUP, &val);
1105 if (val & 0xbf)
1106 pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
1107
1108}
1109
1110static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev)
1111{
1112 void __iomem *base;
1113 int wait_time;
1114
1115 base = ioremap_nocache(pci_resource_start(pdev, 0),
1116 pci_resource_len(pdev, 0));
1117 if (base == NULL) return;
1118
1119 if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
1120 wait_time = 500; /* 0.5 seconds */
1121 writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
1122 writel(OHCI_OCR, base + OHCI_CMDSTATUS);
1123 while (wait_time > 0 &&
1124 readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
1125 wait_time -= 10;
1126 msleep(10);
1127 }
1128 }
1129
1130 /*
1131 * disable interrupts
1132 */
1133 writel(~(u32)0, base + OHCI_INTRDISABLE);
1134 writel(~(u32)0, base + OHCI_INTRSTATUS);
1135
1136 iounmap(base);
1137}
1138
1139static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
1140{
1141 int wait_time, delta;
1142 void __iomem *base, *op_reg_base;
1143 u32 hcc_params, val, temp;
1144 u8 cap_length;
1145
1146 base = ioremap_nocache(pci_resource_start(pdev, 0),
1147 pci_resource_len(pdev, 0));
1148 if (base == NULL) return;
1149
1150 cap_length = readb(base);
1151 op_reg_base = base + cap_length;
1152 hcc_params = readl(base + EHCI_HCC_PARAMS);
1153 hcc_params = (hcc_params >> 8) & 0xff;
1154 if (hcc_params) {
1155 pci_read_config_dword(pdev,
1156 hcc_params + EHCI_USBLEGSUP,
1157 &val);
1158 if (((val & 0xff) == 1) && (val & EHCI_USBLEGSUP_BIOS)) {
1159 /*
1160 * Ok, BIOS is in smm mode, try to hand off...
1161 */
1162 pci_read_config_dword(pdev,
1163 hcc_params + EHCI_USBLEGCTLSTS,
1164 &temp);
1165 pci_write_config_dword(pdev,
1166 hcc_params + EHCI_USBLEGCTLSTS,
1167 temp | EHCI_USBLEGCTLSTS_SOOE);
1168 val |= EHCI_USBLEGSUP_OS;
1169 pci_write_config_dword(pdev,
1170 hcc_params + EHCI_USBLEGSUP,
1171 val);
1172
1173 wait_time = 500;
1174 do {
1175 msleep(10);
1176 wait_time -= 10;
1177 pci_read_config_dword(pdev,
1178 hcc_params + EHCI_USBLEGSUP,
1179 &val);
1180 } while (wait_time && (val & EHCI_USBLEGSUP_BIOS));
1181 if (!wait_time) {
1182 /*
1183 * well, possibly buggy BIOS...
1184 */
1185 printk(KERN_WARNING "EHCI early BIOS handoff "
1186 "failed (BIOS bug ?)\n");
1187 pci_write_config_dword(pdev,
1188 hcc_params + EHCI_USBLEGSUP,
1189 EHCI_USBLEGSUP_OS);
1190 pci_write_config_dword(pdev,
1191 hcc_params + EHCI_USBLEGCTLSTS,
1192 0);
1193 }
1194 }
1195 }
1196
1197 /*
1198 * halt EHCI & disable its interrupts in any case
1199 */
1200 val = readl(op_reg_base + EHCI_USBSTS);
1201 if ((val & EHCI_USBSTS_HALTED) == 0) {
1202 val = readl(op_reg_base + EHCI_USBCMD);
1203 val &= ~EHCI_USBCMD_RUN;
1204 writel(val, op_reg_base + EHCI_USBCMD);
1205
1206 wait_time = 2000;
1207 delta = 100;
1208 do {
1209 writel(0x3f, op_reg_base + EHCI_USBSTS);
1210 udelay(delta);
1211 wait_time -= delta;
1212 val = readl(op_reg_base + EHCI_USBSTS);
1213 if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
1214 break;
1215 }
1216 } while (wait_time > 0);
1217 }
1218 writel(0, op_reg_base + EHCI_USBINTR);
1219 writel(0x3f, op_reg_base + EHCI_USBSTS);
1220
1221 iounmap(base);
1222
1223 return;
1224}
1225
1226
1227
1228static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
1229{
1230 if (!usb_early_handoff)
1231 return;
1232
1233 if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
1234 quirk_usb_handoff_uhci(pdev);
1235 } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
1236 quirk_usb_handoff_ohci(pdev);
1237 } else if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x20)) { /* EHCI */
1238 quirk_usb_disable_ehci(pdev);
1239 }
1240
1241 return;
1242}
1243DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
1244
1245/*
1246 * ... This is further complicated by the fact that some SiS96x south
1247 * bridges pretend to be 85C503/5513 instead. In that case see if we
1248 * spotted a compatible north bridge to make sure.
1249 * (pci_find_device doesn't work yet)
1250 *
1251 * We can also enable the sis96x bit in the discovery register..
1252 */
1253static int __devinitdata sis_96x_compatible = 0;
1254
1255#define SIS_DETECT_REGISTER 0x40
1256
1257static void __init quirk_sis_503(struct pci_dev *dev)
1258{
1259 u8 reg;
1260 u16 devid;
1261
1262 pci_read_config_byte(dev, SIS_DETECT_REGISTER, &reg);
1263 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6));
1264 pci_read_config_word(dev, PCI_DEVICE_ID, &devid);
1265 if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) {
1266 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg);
1267 return;
1268 }
1269
1270 /* Make people aware that we changed the config.. */
1271 printk(KERN_WARNING "Uncovering SIS%x that hid as a SIS503 (compatible=%d)\n", devid, sis_96x_compatible);
1272
1273 /*
1274 * Ok, it now shows up as a 96x.. The 96x quirks are after
1275 * the 503 quirk in the quirk table, so they'll automatically
1276 * run and enable things like the SMBus device
1277 */
1278 dev->device = devid;
1279}
1280
1281static void __init quirk_sis_96x_compatible(struct pci_dev *dev)
1282{
1283 sis_96x_compatible = 1;
1284}
1285DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_645, quirk_sis_96x_compatible );
1286DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_646, quirk_sis_96x_compatible );
1287DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_648, quirk_sis_96x_compatible );
1288DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_650, quirk_sis_96x_compatible );
1289DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_651, quirk_sis_96x_compatible );
1290DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_735, quirk_sis_96x_compatible );
1291
1292DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
1293
1294DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
1295DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
1296DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
1297DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
1298
1299#ifdef CONFIG_X86_IO_APIC
1300static void __init quirk_alder_ioapic(struct pci_dev *pdev)
1301{
1302 int i;
1303
1304 if ((pdev->class >> 8) != 0xff00)
1305 return;
1306
1307 /* the first BAR is the location of the IO APIC...we must
1308 * not touch this (and it's already covered by the fixmap), so
1309 * forcibly insert it into the resource tree */
1310 if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0))
1311 insert_resource(&iomem_resource, &pdev->resource[0]);
1312
1313 /* The next five BARs all seem to be rubbish, so just clean
1314 * them out */
1315 for (i=1; i < 6; i++) {
1316 memset(&pdev->resource[i], 0, sizeof(pdev->resource[i]));
1317 }
1318
1319}
1320DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic );
1321#endif
1322
Jeff Garzikcc675232005-10-17 13:01:57 -04001323#ifdef CONFIG_SCSI_SATA_INTEL_COMBINED
Linus Torvalds1da177e2005-04-16 15:20:36 -07001324static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
1325{
1326 u8 prog, comb, tmp;
1327 int ich = 0;
1328
1329 /*
1330 * Narrow down to Intel SATA PCI devices.
1331 */
1332 switch (pdev->device) {
1333 /* PCI ids taken from drivers/scsi/ata_piix.c */
1334 case 0x24d1:
1335 case 0x24df:
1336 case 0x25a3:
1337 case 0x25b0:
1338 ich = 5;
1339 break;
1340 case 0x2651:
1341 case 0x2652:
1342 case 0x2653:
Jason Gastonc368ca42005-04-16 15:24:44 -07001343 case 0x2680: /* ESB2 */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001344 ich = 6;
1345 break;
1346 case 0x27c0:
1347 case 0x27c4:
1348 ich = 7;
1349 break;
1350 default:
1351 /* we do not handle this PCI device */
1352 return;
1353 }
1354
1355 /*
1356 * Read combined mode register.
1357 */
1358 pci_read_config_byte(pdev, 0x90, &tmp); /* combined mode reg */
1359
1360 if (ich == 5) {
1361 tmp &= 0x6; /* interesting bits 2:1, PATA primary/secondary */
1362 if (tmp == 0x4) /* bits 10x */
1363 comb = (1 << 0); /* SATA port 0, PATA port 1 */
1364 else if (tmp == 0x6) /* bits 11x */
1365 comb = (1 << 2); /* PATA port 0, SATA port 1 */
1366 else
1367 return; /* not in combined mode */
1368 } else {
1369 WARN_ON((ich != 6) && (ich != 7));
1370 tmp &= 0x3; /* interesting bits 1:0 */
1371 if (tmp & (1 << 0))
1372 comb = (1 << 2); /* PATA port 0, SATA port 1 */
1373 else if (tmp & (1 << 1))
1374 comb = (1 << 0); /* SATA port 0, PATA port 1 */
1375 else
1376 return; /* not in combined mode */
1377 }
1378
1379 /*
1380 * Read programming interface register.
1381 * (Tells us if it's legacy or native mode)
1382 */
1383 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
1384
1385 /* if SATA port is in native mode, we're ok. */
1386 if (prog & comb)
1387 return;
1388
1389 /* SATA port is in legacy mode. Reserve port so that
1390 * IDE driver does not attempt to use it. If request_region
1391 * fails, it will be obvious at boot time, so we don't bother
1392 * checking return values.
1393 */
1394 if (comb == (1 << 0))
1395 request_region(0x1f0, 8, "libata"); /* port 0 */
1396 else
1397 request_region(0x170, 8, "libata"); /* port 1 */
1398}
1399DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_intel_ide_combined );
Jeff Garzikcc675232005-10-17 13:01:57 -04001400#endif /* CONFIG_SCSI_SATA_INTEL_COMBINED */
Linus Torvalds1da177e2005-04-16 15:20:36 -07001401
1402
1403int pcie_mch_quirk;
1404
1405static void __devinit quirk_pcie_mch(struct pci_dev *pdev)
1406{
1407 pcie_mch_quirk = 1;
1408}
1409DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch );
1410DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch );
1411DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch );
1412
Kristen Accardi4602b882005-08-16 15:15:58 -07001413
1414/*
1415 * It's possible for the MSI to get corrupted if shpc and acpi
1416 * are used together on certain PXH-based systems.
1417 */
1418static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
1419{
1420 disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
1421 PCI_CAP_ID_MSI);
1422 dev->no_msi = 1;
1423
1424 printk(KERN_WARNING "PCI: PXH quirk detected, "
1425 "disabling MSI for SHPC device\n");
1426}
1427DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
1428DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
1429DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
1430DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
1431DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
1432
1433
Linus Torvalds1da177e2005-04-16 15:20:36 -07001434static void __devinit quirk_netmos(struct pci_dev *dev)
1435{
1436 unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
1437 unsigned int num_serial = dev->subsystem_device & 0xf;
1438
1439 /*
1440 * These Netmos parts are multiport serial devices with optional
1441 * parallel ports. Even when parallel ports are present, they
1442 * are identified as class SERIAL, which means the serial driver
1443 * will claim them. To prevent this, mark them as class OTHER.
1444 * These combo devices should be claimed by parport_serial.
1445 *
1446 * The subdevice ID is of the form 0x00PS, where <P> is the number
1447 * of parallel ports and <S> is the number of serial ports.
1448 */
1449 switch (dev->device) {
1450 case PCI_DEVICE_ID_NETMOS_9735:
1451 case PCI_DEVICE_ID_NETMOS_9745:
1452 case PCI_DEVICE_ID_NETMOS_9835:
1453 case PCI_DEVICE_ID_NETMOS_9845:
1454 case PCI_DEVICE_ID_NETMOS_9855:
1455 if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_SERIAL &&
1456 num_parallel) {
1457 printk(KERN_INFO "PCI: Netmos %04x (%u parallel, "
1458 "%u serial); changing class SERIAL to OTHER "
1459 "(use parport_serial)\n",
1460 dev->device, num_parallel, num_serial);
1461 dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) |
1462 (dev->class & 0xff);
1463 }
1464 }
1465}
1466DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos);
1467
1468static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
1469{
1470 while (f < end) {
1471 if ((f->vendor == dev->vendor || f->vendor == (u16) PCI_ANY_ID) &&
1472 (f->device == dev->device || f->device == (u16) PCI_ANY_ID)) {
1473 pr_debug("PCI: Calling quirk %p for %s\n", f->hook, pci_name(dev));
1474 f->hook(dev);
1475 }
1476 f++;
1477 }
1478}
1479
1480extern struct pci_fixup __start_pci_fixups_early[];
1481extern struct pci_fixup __end_pci_fixups_early[];
1482extern struct pci_fixup __start_pci_fixups_header[];
1483extern struct pci_fixup __end_pci_fixups_header[];
1484extern struct pci_fixup __start_pci_fixups_final[];
1485extern struct pci_fixup __end_pci_fixups_final[];
1486extern struct pci_fixup __start_pci_fixups_enable[];
1487extern struct pci_fixup __end_pci_fixups_enable[];
1488
1489
1490void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
1491{
1492 struct pci_fixup *start, *end;
1493
1494 switch(pass) {
1495 case pci_fixup_early:
1496 start = __start_pci_fixups_early;
1497 end = __end_pci_fixups_early;
1498 break;
1499
1500 case pci_fixup_header:
1501 start = __start_pci_fixups_header;
1502 end = __end_pci_fixups_header;
1503 break;
1504
1505 case pci_fixup_final:
1506 start = __start_pci_fixups_final;
1507 end = __end_pci_fixups_final;
1508 break;
1509
1510 case pci_fixup_enable:
1511 start = __start_pci_fixups_enable;
1512 end = __end_pci_fixups_enable;
1513 break;
1514
1515 default:
1516 /* stupid compiler warning, you would think with an enum... */
1517 return;
1518 }
1519 pci_do_fixups(dev, start, end);
1520}
1521
1522EXPORT_SYMBOL(pcie_mch_quirk);
1523#ifdef CONFIG_HOTPLUG
1524EXPORT_SYMBOL(pci_fixup_device);
1525#endif