Kuninori Morimoto | 2f98382 | 2011-04-05 11:40:54 +0900 | [diff] [blame^] | 1 | /* |
| 2 | * Renesas USB driver |
| 3 | * |
| 4 | * Copyright (C) 2011 Renesas Solutions Corp. |
| 5 | * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| 6 | * |
| 7 | * This program is distributed in the hope that it will be useful, |
| 8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 10 | * GNU General Public License for more details. |
| 11 | * |
| 12 | * You should have received a copy of the GNU General Public License |
| 13 | * along with this program; if not, write to the Free Software |
| 14 | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| 15 | * |
| 16 | */ |
| 17 | #include <linux/io.h> |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/platform_device.h> |
| 20 | #include <linux/usb/ch9.h> |
| 21 | #include <linux/usb/gadget.h> |
| 22 | #include "common.h" |
| 23 | |
| 24 | /* |
| 25 | * struct |
| 26 | */ |
| 27 | struct usbhsg_request { |
| 28 | struct usb_request req; |
| 29 | struct list_head node; |
| 30 | }; |
| 31 | |
| 32 | #define EP_NAME_SIZE 8 |
| 33 | struct usbhsg_gpriv; |
| 34 | struct usbhsg_pipe_handle; |
| 35 | struct usbhsg_uep { |
| 36 | struct usb_ep ep; |
| 37 | struct usbhs_pipe *pipe; |
| 38 | struct list_head list; |
| 39 | |
| 40 | char ep_name[EP_NAME_SIZE]; |
| 41 | |
| 42 | struct usbhsg_gpriv *gpriv; |
| 43 | struct usbhsg_pipe_handle *handler; |
| 44 | }; |
| 45 | |
| 46 | struct usbhsg_gpriv { |
| 47 | struct usb_gadget gadget; |
| 48 | struct usbhs_mod mod; |
| 49 | |
| 50 | struct usbhsg_uep *uep; |
| 51 | int uep_size; |
| 52 | |
| 53 | struct usb_gadget_driver *driver; |
| 54 | |
| 55 | u32 status; |
| 56 | #define USBHSG_STATUS_STARTED (1 << 0) |
| 57 | #define USBHSG_STATUS_REGISTERD (1 << 1) |
| 58 | #define USBHSG_STATUS_WEDGE (1 << 2) |
| 59 | }; |
| 60 | |
| 61 | struct usbhsg_pipe_handle { |
| 62 | int (*prepare)(struct usbhsg_uep *uep, struct usbhsg_request *ureq); |
| 63 | int (*try_run)(struct usbhsg_uep *uep, struct usbhsg_request *ureq); |
| 64 | void (*irq_mask)(struct usbhsg_uep *uep, int enable); |
| 65 | }; |
| 66 | |
| 67 | struct usbhsg_recip_handle { |
| 68 | char *name; |
| 69 | int (*device)(struct usbhs_priv *priv, struct usbhsg_uep *uep, |
| 70 | struct usb_ctrlrequest *ctrl); |
| 71 | int (*interface)(struct usbhs_priv *priv, struct usbhsg_uep *uep, |
| 72 | struct usb_ctrlrequest *ctrl); |
| 73 | int (*endpoint)(struct usbhs_priv *priv, struct usbhsg_uep *uep, |
| 74 | struct usb_ctrlrequest *ctrl); |
| 75 | }; |
| 76 | |
| 77 | /* |
| 78 | * macro |
| 79 | */ |
| 80 | #define usbhsg_priv_to_gpriv(priv) \ |
| 81 | container_of( \ |
| 82 | usbhs_mod_get(priv, USBHS_GADGET), \ |
| 83 | struct usbhsg_gpriv, mod) |
| 84 | |
| 85 | #define __usbhsg_for_each_uep(start, pos, g, i) \ |
| 86 | for (i = start, pos = (g)->uep; \ |
| 87 | i < (g)->uep_size; \ |
| 88 | i++, pos = (g)->uep + i) |
| 89 | |
| 90 | #define usbhsg_for_each_uep(pos, gpriv, i) \ |
| 91 | __usbhsg_for_each_uep(1, pos, gpriv, i) |
| 92 | |
| 93 | #define usbhsg_for_each_uep_with_dcp(pos, gpriv, i) \ |
| 94 | __usbhsg_for_each_uep(0, pos, gpriv, i) |
| 95 | |
| 96 | #define usbhsg_gadget_to_gpriv(g)\ |
| 97 | container_of(g, struct usbhsg_gpriv, gadget) |
| 98 | |
| 99 | #define usbhsg_req_to_ureq(r)\ |
| 100 | container_of(r, struct usbhsg_request, req) |
| 101 | |
| 102 | #define usbhsg_ep_to_uep(e) container_of(e, struct usbhsg_uep, ep) |
| 103 | #define usbhsg_gpriv_to_lock(gp) usbhs_priv_to_lock((gp)->mod.priv) |
| 104 | #define usbhsg_gpriv_to_dev(gp) usbhs_priv_to_dev((gp)->mod.priv) |
| 105 | #define usbhsg_gpriv_to_priv(gp) ((gp)->mod.priv) |
| 106 | #define usbhsg_gpriv_to_dcp(gp) ((gp)->uep) |
| 107 | #define usbhsg_gpriv_to_nth_uep(gp, i) ((gp)->uep + i) |
| 108 | #define usbhsg_uep_to_gpriv(u) ((u)->gpriv) |
| 109 | #define usbhsg_uep_to_pipe(u) ((u)->pipe) |
| 110 | #define usbhsg_pipe_to_uep(p) ((p)->mod_private) |
| 111 | #define usbhsg_is_dcp(u) ((u) == usbhsg_gpriv_to_dcp((u)->gpriv)) |
| 112 | |
| 113 | #define usbhsg_is_not_connected(gp) ((gp)->gadget.speed == USB_SPEED_UNKNOWN) |
| 114 | |
| 115 | /* status */ |
| 116 | #define usbhsg_status_init(gp) do {(gp)->status = 0; } while (0) |
| 117 | #define usbhsg_status_set(gp, b) (gp->status |= b) |
| 118 | #define usbhsg_status_clr(gp, b) (gp->status &= ~b) |
| 119 | #define usbhsg_status_has(gp, b) (gp->status & b) |
| 120 | |
| 121 | /* |
| 122 | * list push/pop |
| 123 | */ |
| 124 | static void usbhsg_queue_push(struct usbhsg_uep *uep, |
| 125 | struct usbhsg_request *ureq) |
| 126 | { |
| 127 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 128 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 129 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| 130 | |
| 131 | /* |
| 132 | ********* assume under spin lock ********* |
| 133 | */ |
| 134 | list_del_init(&ureq->node); |
| 135 | list_add_tail(&ureq->node, &uep->list); |
| 136 | ureq->req.actual = 0; |
| 137 | ureq->req.status = -EINPROGRESS; |
| 138 | |
| 139 | dev_dbg(dev, "pipe %d : queue push (%d)\n", |
| 140 | usbhs_pipe_number(pipe), |
| 141 | ureq->req.length); |
| 142 | } |
| 143 | |
| 144 | static struct usbhsg_request *usbhsg_queue_get(struct usbhsg_uep *uep) |
| 145 | { |
| 146 | /* |
| 147 | ********* assume under spin lock ********* |
| 148 | */ |
| 149 | if (list_empty(&uep->list)) |
| 150 | return NULL; |
| 151 | |
| 152 | return list_entry(uep->list.next, struct usbhsg_request, node); |
| 153 | } |
| 154 | |
| 155 | #define usbhsg_queue_prepare(uep) __usbhsg_queue_handler(uep, 1); |
| 156 | #define usbhsg_queue_handle(uep) __usbhsg_queue_handler(uep, 0); |
| 157 | static int __usbhsg_queue_handler(struct usbhsg_uep *uep, int prepare) |
| 158 | { |
| 159 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 160 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 161 | struct usbhsg_request *ureq; |
| 162 | spinlock_t *lock = usbhsg_gpriv_to_lock(gpriv); |
| 163 | unsigned long flags; |
| 164 | int is_locked; |
| 165 | int ret = 0; |
| 166 | |
| 167 | if (!uep->handler) { |
| 168 | dev_err(dev, "no handler function\n"); |
| 169 | return -EIO; |
| 170 | } |
| 171 | |
| 172 | /* |
| 173 | * CAUTION [*queue handler*] |
| 174 | * |
| 175 | * This function will be called for start/restart queue operation. |
| 176 | * OTOH the most much worry for USB driver is spinlock nest. |
| 177 | * Specially it are |
| 178 | * - usb_ep_ops :: queue |
| 179 | * - usb_request :: complete |
| 180 | * |
| 181 | * But the caller of this function need not care about spinlock. |
| 182 | * This function is using spin_trylock_irqsave for it. |
| 183 | * if "is_locked" is 1, this mean this function lock it. |
| 184 | * but if it is 0, this mean it is already under spin lock. |
| 185 | * see also |
| 186 | * CAUTION [*endpoint queue*] |
| 187 | * CAUTION [*request complete*] |
| 188 | */ |
| 189 | |
| 190 | /****************** spin try lock *******************/ |
| 191 | is_locked = spin_trylock_irqsave(lock, flags); |
| 192 | ureq = usbhsg_queue_get(uep); |
| 193 | if (ureq) { |
| 194 | if (prepare) |
| 195 | ret = uep->handler->prepare(uep, ureq); |
| 196 | else |
| 197 | ret = uep->handler->try_run(uep, ureq); |
| 198 | } |
| 199 | if (is_locked) |
| 200 | spin_unlock_irqrestore(lock, flags); |
| 201 | /******************** spin unlock ******************/ |
| 202 | |
| 203 | return ret; |
| 204 | } |
| 205 | |
| 206 | static void usbhsg_queue_pop(struct usbhsg_uep *uep, |
| 207 | struct usbhsg_request *ureq, |
| 208 | int status) |
| 209 | { |
| 210 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 211 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| 212 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 213 | |
| 214 | /* |
| 215 | ********* assume under spin lock ********* |
| 216 | */ |
| 217 | |
| 218 | /* |
| 219 | * CAUTION [*request complete*] |
| 220 | * |
| 221 | * There is a possibility not to be called in correct order |
| 222 | * if "complete" is called without spinlock. |
| 223 | * |
| 224 | * So, this function assume it is under spinlock, |
| 225 | * and call usb_request :: complete. |
| 226 | * |
| 227 | * But this "complete" will push next usb_request. |
| 228 | * It mean "usb_ep_ops :: queue" which is using spinlock is called |
| 229 | * under spinlock. |
| 230 | * |
| 231 | * To avoid dead-lock, this driver is using spin_trylock. |
| 232 | * CAUTION [*endpoint queue*] |
| 233 | * CAUTION [*queue handler*] |
| 234 | */ |
| 235 | |
| 236 | dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe)); |
| 237 | |
| 238 | list_del_init(&ureq->node); |
| 239 | |
| 240 | ureq->req.status = status; |
| 241 | ureq->req.complete(&uep->ep, &ureq->req); |
| 242 | |
| 243 | /* more request ? */ |
| 244 | if (0 == status) |
| 245 | usbhsg_queue_prepare(uep); |
| 246 | } |
| 247 | |
| 248 | /* |
| 249 | * irq enable/disable function |
| 250 | */ |
| 251 | #define usbhsg_irq_callback_ctrl(uep, status, enable) \ |
| 252 | ({ \ |
| 253 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); \ |
| 254 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); \ |
| 255 | struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); \ |
| 256 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); \ |
| 257 | if (!mod) \ |
| 258 | return; \ |
| 259 | if (enable) \ |
| 260 | mod->irq_##status |= (1 << usbhs_pipe_number(pipe)); \ |
| 261 | else \ |
| 262 | mod->irq_##status &= ~(1 << usbhs_pipe_number(pipe)); \ |
| 263 | usbhs_irq_callback_update(priv, mod); \ |
| 264 | }) |
| 265 | |
| 266 | static void usbhsg_irq_empty_ctrl(struct usbhsg_uep *uep, int enable) |
| 267 | { |
| 268 | usbhsg_irq_callback_ctrl(uep, bempsts, enable); |
| 269 | } |
| 270 | |
| 271 | static void usbhsg_irq_ready_ctrl(struct usbhsg_uep *uep, int enable) |
| 272 | { |
| 273 | usbhsg_irq_callback_ctrl(uep, brdysts, enable); |
| 274 | } |
| 275 | |
| 276 | /* |
| 277 | * handler function |
| 278 | */ |
| 279 | static int usbhsg_try_run_ctrl_stage_end(struct usbhsg_uep *uep, |
| 280 | struct usbhsg_request *ureq) |
| 281 | { |
| 282 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| 283 | |
| 284 | /* |
| 285 | ********* assume under spin lock ********* |
| 286 | */ |
| 287 | |
| 288 | usbhs_dcp_control_transfer_done(pipe); |
| 289 | usbhsg_queue_pop(uep, ureq, 0); |
| 290 | |
| 291 | return 0; |
| 292 | } |
| 293 | |
| 294 | static int usbhsg_try_run_send_packet(struct usbhsg_uep *uep, |
| 295 | struct usbhsg_request *ureq) |
| 296 | { |
| 297 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| 298 | struct usb_request *req = &ureq->req; |
| 299 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 300 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 301 | void *buf; |
| 302 | int remainder, send; |
| 303 | int is_done = 0; |
| 304 | int enable; |
| 305 | int maxp; |
| 306 | |
| 307 | /* |
| 308 | ********* assume under spin lock ********* |
| 309 | */ |
| 310 | |
| 311 | maxp = usbhs_pipe_get_maxpacket(pipe); |
| 312 | buf = req->buf + req->actual; |
| 313 | remainder = req->length - req->actual; |
| 314 | |
| 315 | send = usbhs_fifo_write(pipe, buf, remainder); |
| 316 | |
| 317 | /* |
| 318 | * send < 0 : pipe busy |
| 319 | * send = 0 : send zero packet |
| 320 | * send > 0 : send data |
| 321 | * |
| 322 | * send <= max_packet |
| 323 | */ |
| 324 | if (send > 0) |
| 325 | req->actual += send; |
| 326 | |
| 327 | /* send all packet ? */ |
| 328 | if (send < remainder) |
| 329 | is_done = 0; /* there are remainder data */ |
| 330 | else if (send < maxp) |
| 331 | is_done = 1; /* short packet */ |
| 332 | else |
| 333 | is_done = !req->zero; /* send zero packet ? */ |
| 334 | |
| 335 | dev_dbg(dev, " send %d (%d/ %d/ %d/ %d)\n", |
| 336 | usbhs_pipe_number(pipe), |
| 337 | remainder, send, is_done, req->zero); |
| 338 | |
| 339 | /* |
| 340 | * enable interrupt and send again in irq handler |
| 341 | * if it still have remainder data which should be sent. |
| 342 | */ |
| 343 | enable = !is_done; |
| 344 | uep->handler->irq_mask(uep, enable); |
| 345 | |
| 346 | /* |
| 347 | * usbhs_fifo_enable execute |
| 348 | * - after callback_update, |
| 349 | * - before queue_pop / stage_end |
| 350 | */ |
| 351 | usbhs_fifo_enable(pipe); |
| 352 | |
| 353 | /* |
| 354 | * all data were sent ? |
| 355 | */ |
| 356 | if (is_done) { |
| 357 | /* it care below call in |
| 358 | "function mode" */ |
| 359 | if (usbhsg_is_dcp(uep)) |
| 360 | usbhs_dcp_control_transfer_done(pipe); |
| 361 | |
| 362 | usbhsg_queue_pop(uep, ureq, 0); |
| 363 | } |
| 364 | |
| 365 | return 0; |
| 366 | } |
| 367 | |
| 368 | static int usbhsg_prepare_send_packet(struct usbhsg_uep *uep, |
| 369 | struct usbhsg_request *ureq) |
| 370 | { |
| 371 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| 372 | |
| 373 | /* |
| 374 | ********* assume under spin lock ********* |
| 375 | */ |
| 376 | |
| 377 | usbhs_fifo_prepare_write(pipe); |
| 378 | usbhsg_try_run_send_packet(uep, ureq); |
| 379 | |
| 380 | return 0; |
| 381 | } |
| 382 | |
| 383 | static int usbhsg_try_run_receive_packet(struct usbhsg_uep *uep, |
| 384 | struct usbhsg_request *ureq) |
| 385 | { |
| 386 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| 387 | struct usb_request *req = &ureq->req; |
| 388 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 389 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 390 | void *buf; |
| 391 | int maxp; |
| 392 | int remainder, recv; |
| 393 | int is_done = 0; |
| 394 | |
| 395 | /* |
| 396 | ********* assume under spin lock ********* |
| 397 | */ |
| 398 | |
| 399 | maxp = usbhs_pipe_get_maxpacket(pipe); |
| 400 | buf = req->buf + req->actual; |
| 401 | remainder = req->length - req->actual; |
| 402 | |
| 403 | recv = usbhs_fifo_read(pipe, buf, remainder); |
| 404 | /* |
| 405 | * recv < 0 : pipe busy |
| 406 | * recv >= 0 : receive data |
| 407 | * |
| 408 | * recv <= max_packet |
| 409 | */ |
| 410 | if (recv < 0) |
| 411 | return -EBUSY; |
| 412 | |
| 413 | /* update parameters */ |
| 414 | req->actual += recv; |
| 415 | |
| 416 | if ((recv == remainder) || /* receive all data */ |
| 417 | (recv < maxp)) /* short packet */ |
| 418 | is_done = 1; |
| 419 | |
| 420 | dev_dbg(dev, " recv %d (%d/ %d/ %d/ %d)\n", |
| 421 | usbhs_pipe_number(pipe), |
| 422 | remainder, recv, is_done, req->zero); |
| 423 | |
| 424 | /* read all data ? */ |
| 425 | if (is_done) { |
| 426 | int disable = 0; |
| 427 | |
| 428 | uep->handler->irq_mask(uep, disable); |
| 429 | usbhs_fifo_disable(pipe); |
| 430 | usbhsg_queue_pop(uep, ureq, 0); |
| 431 | } |
| 432 | |
| 433 | return 0; |
| 434 | } |
| 435 | |
| 436 | static int usbhsg_prepare_receive_packet(struct usbhsg_uep *uep, |
| 437 | struct usbhsg_request *ureq) |
| 438 | { |
| 439 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| 440 | int enable = 1; |
| 441 | int ret; |
| 442 | |
| 443 | /* |
| 444 | ********* assume under spin lock ********* |
| 445 | */ |
| 446 | |
| 447 | ret = usbhs_fifo_prepare_read(pipe); |
| 448 | if (ret < 0) |
| 449 | return ret; |
| 450 | |
| 451 | /* |
| 452 | * data will be read in interrupt handler |
| 453 | */ |
| 454 | uep->handler->irq_mask(uep, enable); |
| 455 | |
| 456 | return ret; |
| 457 | } |
| 458 | |
| 459 | static struct usbhsg_pipe_handle usbhsg_handler_send_by_empty = { |
| 460 | .prepare = usbhsg_prepare_send_packet, |
| 461 | .try_run = usbhsg_try_run_send_packet, |
| 462 | .irq_mask = usbhsg_irq_empty_ctrl, |
| 463 | }; |
| 464 | |
| 465 | static struct usbhsg_pipe_handle usbhsg_handler_send_by_ready = { |
| 466 | .prepare = usbhsg_prepare_send_packet, |
| 467 | .try_run = usbhsg_try_run_send_packet, |
| 468 | .irq_mask = usbhsg_irq_ready_ctrl, |
| 469 | }; |
| 470 | |
| 471 | static struct usbhsg_pipe_handle usbhsg_handler_recv_by_ready = { |
| 472 | .prepare = usbhsg_prepare_receive_packet, |
| 473 | .try_run = usbhsg_try_run_receive_packet, |
| 474 | .irq_mask = usbhsg_irq_ready_ctrl, |
| 475 | }; |
| 476 | |
| 477 | static struct usbhsg_pipe_handle usbhsg_handler_ctrl_stage_end = { |
| 478 | .prepare = usbhsg_try_run_ctrl_stage_end, |
| 479 | .try_run = usbhsg_try_run_ctrl_stage_end, |
| 480 | }; |
| 481 | |
| 482 | /* |
| 483 | * DCP pipe can NOT use "ready interrupt" for "send" |
| 484 | * it should use "empty" interrupt. |
| 485 | * see |
| 486 | * "Operation" - "Interrupt Function" - "BRDY Interrupt" |
| 487 | * |
| 488 | * on the other hand, normal pipe can use "ready interrupt" for "send" |
| 489 | * even though it is single/double buffer |
| 490 | */ |
| 491 | #define usbhsg_handler_send_ctrl usbhsg_handler_send_by_empty |
| 492 | #define usbhsg_handler_recv_ctrl usbhsg_handler_recv_by_ready |
| 493 | |
| 494 | #define usbhsg_handler_send_packet usbhsg_handler_send_by_ready |
| 495 | #define usbhsg_handler_recv_packet usbhsg_handler_recv_by_ready |
| 496 | |
| 497 | /* |
| 498 | * USB_TYPE_STANDARD / clear feature functions |
| 499 | */ |
| 500 | static int usbhsg_recip_handler_std_control_done(struct usbhs_priv *priv, |
| 501 | struct usbhsg_uep *uep, |
| 502 | struct usb_ctrlrequest *ctrl) |
| 503 | { |
| 504 | struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| 505 | struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); |
| 506 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp); |
| 507 | |
| 508 | usbhs_dcp_control_transfer_done(pipe); |
| 509 | |
| 510 | return 0; |
| 511 | } |
| 512 | |
| 513 | static int usbhsg_recip_handler_std_clear_endpoint(struct usbhs_priv *priv, |
| 514 | struct usbhsg_uep *uep, |
| 515 | struct usb_ctrlrequest *ctrl) |
| 516 | { |
| 517 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 518 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| 519 | |
| 520 | if (!usbhsg_status_has(gpriv, USBHSG_STATUS_WEDGE)) { |
| 521 | usbhs_fifo_disable(pipe); |
| 522 | usbhs_pipe_clear_sequence(pipe); |
| 523 | usbhs_fifo_enable(pipe); |
| 524 | } |
| 525 | |
| 526 | usbhsg_recip_handler_std_control_done(priv, uep, ctrl); |
| 527 | |
| 528 | usbhsg_queue_prepare(uep); |
| 529 | |
| 530 | return 0; |
| 531 | } |
| 532 | |
| 533 | struct usbhsg_recip_handle req_clear_feature = { |
| 534 | .name = "clear feature", |
| 535 | .device = usbhsg_recip_handler_std_control_done, |
| 536 | .interface = usbhsg_recip_handler_std_control_done, |
| 537 | .endpoint = usbhsg_recip_handler_std_clear_endpoint, |
| 538 | }; |
| 539 | |
| 540 | /* |
| 541 | * USB_TYPE handler |
| 542 | */ |
| 543 | static int usbhsg_recip_run_handle(struct usbhs_priv *priv, |
| 544 | struct usbhsg_recip_handle *handler, |
| 545 | struct usb_ctrlrequest *ctrl) |
| 546 | { |
| 547 | struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| 548 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 549 | struct usbhsg_uep *uep; |
| 550 | int recip = ctrl->bRequestType & USB_RECIP_MASK; |
| 551 | int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; |
| 552 | int ret; |
| 553 | int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep, |
| 554 | struct usb_ctrlrequest *ctrl); |
| 555 | char *msg; |
| 556 | |
| 557 | uep = usbhsg_gpriv_to_nth_uep(gpriv, nth); |
| 558 | |
| 559 | switch (recip) { |
| 560 | case USB_RECIP_DEVICE: |
| 561 | msg = "DEVICE"; |
| 562 | func = handler->device; |
| 563 | break; |
| 564 | case USB_RECIP_INTERFACE: |
| 565 | msg = "INTERFACE"; |
| 566 | func = handler->interface; |
| 567 | break; |
| 568 | case USB_RECIP_ENDPOINT: |
| 569 | msg = "ENDPOINT"; |
| 570 | func = handler->endpoint; |
| 571 | break; |
| 572 | default: |
| 573 | dev_warn(dev, "unsupported RECIP(%d)\n", recip); |
| 574 | func = NULL; |
| 575 | ret = -EINVAL; |
| 576 | } |
| 577 | |
| 578 | if (func) { |
| 579 | dev_dbg(dev, "%s (pipe %d :%s)\n", handler->name, nth, msg); |
| 580 | ret = func(priv, uep, ctrl); |
| 581 | } |
| 582 | |
| 583 | return ret; |
| 584 | } |
| 585 | |
| 586 | /* |
| 587 | * irq functions |
| 588 | * |
| 589 | * it will be called from usbhs_interrupt |
| 590 | */ |
| 591 | static int usbhsg_irq_dev_state(struct usbhs_priv *priv, |
| 592 | struct usbhs_irq_state *irq_state) |
| 593 | { |
| 594 | struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| 595 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 596 | |
| 597 | gpriv->gadget.speed = usbhs_status_get_usb_speed(irq_state); |
| 598 | |
| 599 | dev_dbg(dev, "state = %x : speed : %d\n", |
| 600 | usbhs_status_get_device_state(irq_state), |
| 601 | gpriv->gadget.speed); |
| 602 | |
| 603 | return 0; |
| 604 | } |
| 605 | |
| 606 | static int usbhsg_irq_ctrl_stage(struct usbhs_priv *priv, |
| 607 | struct usbhs_irq_state *irq_state) |
| 608 | { |
| 609 | struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| 610 | struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); |
| 611 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(dcp); |
| 612 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 613 | struct usb_ctrlrequest ctrl; |
| 614 | struct usbhsg_recip_handle *recip_handler = NULL; |
| 615 | int stage = usbhs_status_get_ctrl_stage(irq_state); |
| 616 | int ret = 0; |
| 617 | |
| 618 | dev_dbg(dev, "stage = %d\n", stage); |
| 619 | |
| 620 | /* |
| 621 | * see Manual |
| 622 | * |
| 623 | * "Operation" |
| 624 | * - "Interrupt Function" |
| 625 | * - "Control Transfer Stage Transition Interrupt" |
| 626 | * - Fig. "Control Transfer Stage Transitions" |
| 627 | */ |
| 628 | |
| 629 | switch (stage) { |
| 630 | case READ_DATA_STAGE: |
| 631 | dcp->handler = &usbhsg_handler_send_ctrl; |
| 632 | break; |
| 633 | case WRITE_DATA_STAGE: |
| 634 | dcp->handler = &usbhsg_handler_recv_ctrl; |
| 635 | break; |
| 636 | case NODATA_STATUS_STAGE: |
| 637 | dcp->handler = &usbhsg_handler_ctrl_stage_end; |
| 638 | break; |
| 639 | default: |
| 640 | return ret; |
| 641 | } |
| 642 | |
| 643 | /* |
| 644 | * get usb request |
| 645 | */ |
| 646 | usbhs_usbreq_get_val(priv, &ctrl); |
| 647 | |
| 648 | switch (ctrl.bRequestType & USB_TYPE_MASK) { |
| 649 | case USB_TYPE_STANDARD: |
| 650 | switch (ctrl.bRequest) { |
| 651 | case USB_REQ_CLEAR_FEATURE: |
| 652 | recip_handler = &req_clear_feature; |
| 653 | break; |
| 654 | } |
| 655 | } |
| 656 | |
| 657 | /* |
| 658 | * setup stage / run recip |
| 659 | */ |
| 660 | if (recip_handler) |
| 661 | ret = usbhsg_recip_run_handle(priv, recip_handler, &ctrl); |
| 662 | else |
| 663 | ret = gpriv->driver->setup(&gpriv->gadget, &ctrl); |
| 664 | |
| 665 | if (ret < 0) |
| 666 | usbhs_fifo_stall(pipe); |
| 667 | |
| 668 | return ret; |
| 669 | } |
| 670 | |
| 671 | static int usbhsg_irq_empty(struct usbhs_priv *priv, |
| 672 | struct usbhs_irq_state *irq_state) |
| 673 | { |
| 674 | struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| 675 | struct usbhsg_uep *uep; |
| 676 | struct usbhs_pipe *pipe; |
| 677 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 678 | int i, ret; |
| 679 | |
| 680 | if (!irq_state->bempsts) { |
| 681 | dev_err(dev, "debug %s !!\n", __func__); |
| 682 | return -EIO; |
| 683 | } |
| 684 | |
| 685 | dev_dbg(dev, "irq empty [0x%04x]\n", irq_state->bempsts); |
| 686 | |
| 687 | /* |
| 688 | * search interrupted "pipe" |
| 689 | * not "uep". |
| 690 | */ |
| 691 | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { |
| 692 | if (!(irq_state->bempsts & (1 << i))) |
| 693 | continue; |
| 694 | |
| 695 | uep = usbhsg_pipe_to_uep(pipe); |
| 696 | ret = usbhsg_queue_handle(uep); |
| 697 | if (ret < 0) |
| 698 | dev_err(dev, "send error %d : %d\n", i, ret); |
| 699 | } |
| 700 | |
| 701 | return 0; |
| 702 | } |
| 703 | |
| 704 | static int usbhsg_irq_ready(struct usbhs_priv *priv, |
| 705 | struct usbhs_irq_state *irq_state) |
| 706 | { |
| 707 | struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| 708 | struct usbhsg_uep *uep; |
| 709 | struct usbhs_pipe *pipe; |
| 710 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 711 | int i, ret; |
| 712 | |
| 713 | if (!irq_state->brdysts) { |
| 714 | dev_err(dev, "debug %s !!\n", __func__); |
| 715 | return -EIO; |
| 716 | } |
| 717 | |
| 718 | dev_dbg(dev, "irq ready [0x%04x]\n", irq_state->brdysts); |
| 719 | |
| 720 | /* |
| 721 | * search interrupted "pipe" |
| 722 | * not "uep". |
| 723 | */ |
| 724 | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { |
| 725 | if (!(irq_state->brdysts & (1 << i))) |
| 726 | continue; |
| 727 | |
| 728 | uep = usbhsg_pipe_to_uep(pipe); |
| 729 | ret = usbhsg_queue_handle(uep); |
| 730 | if (ret < 0) |
| 731 | dev_err(dev, "receive error %d : %d\n", i, ret); |
| 732 | } |
| 733 | |
| 734 | return 0; |
| 735 | } |
| 736 | |
| 737 | /* |
| 738 | * |
| 739 | * usb_dcp_ops |
| 740 | * |
| 741 | */ |
| 742 | static int usbhsg_dcp_enable(struct usbhsg_uep *uep) |
| 743 | { |
| 744 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 745 | struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| 746 | struct usbhs_pipe *pipe; |
| 747 | |
| 748 | /* |
| 749 | ********* assume under spin lock ********* |
| 750 | */ |
| 751 | |
| 752 | pipe = usbhs_dcp_malloc(priv); |
| 753 | if (!pipe) |
| 754 | return -EIO; |
| 755 | |
| 756 | uep->pipe = pipe; |
| 757 | uep->pipe->mod_private = uep; |
| 758 | INIT_LIST_HEAD(&uep->list); |
| 759 | |
| 760 | return 0; |
| 761 | } |
| 762 | |
| 763 | #define usbhsg_dcp_disable usbhsg_pipe_disable |
| 764 | static int usbhsg_pipe_disable(struct usbhsg_uep *uep) |
| 765 | { |
| 766 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| 767 | struct usbhsg_request *ureq; |
| 768 | int disable = 0; |
| 769 | |
| 770 | /* |
| 771 | ********* assume under spin lock ********* |
| 772 | */ |
| 773 | |
| 774 | usbhs_fifo_disable(pipe); |
| 775 | |
| 776 | /* |
| 777 | * disable pipe irq |
| 778 | */ |
| 779 | usbhsg_irq_empty_ctrl(uep, disable); |
| 780 | usbhsg_irq_ready_ctrl(uep, disable); |
| 781 | |
| 782 | while (1) { |
| 783 | ureq = usbhsg_queue_get(uep); |
| 784 | if (!ureq) |
| 785 | break; |
| 786 | |
| 787 | usbhsg_queue_pop(uep, ureq, -ECONNRESET); |
| 788 | } |
| 789 | |
| 790 | uep->pipe->mod_private = NULL; |
| 791 | uep->pipe = NULL; |
| 792 | |
| 793 | return 0; |
| 794 | } |
| 795 | |
| 796 | /* |
| 797 | * |
| 798 | * usb_ep_ops |
| 799 | * |
| 800 | */ |
| 801 | static int usbhsg_ep_enable(struct usb_ep *ep, |
| 802 | const struct usb_endpoint_descriptor *desc) |
| 803 | { |
| 804 | struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); |
| 805 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 806 | struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| 807 | struct usbhs_pipe *pipe; |
| 808 | spinlock_t *lock = usbhsg_gpriv_to_lock(gpriv); |
| 809 | unsigned long flags; |
| 810 | int ret = -EIO; |
| 811 | |
| 812 | /******************** spin lock ********************/ |
| 813 | spin_lock_irqsave(lock, flags); |
| 814 | |
| 815 | pipe = usbhs_pipe_malloc(priv, desc); |
| 816 | if (pipe) { |
| 817 | uep->pipe = pipe; |
| 818 | pipe->mod_private = uep; |
| 819 | INIT_LIST_HEAD(&uep->list); |
| 820 | |
| 821 | if (usb_endpoint_dir_in(desc)) |
| 822 | uep->handler = &usbhsg_handler_send_packet; |
| 823 | else |
| 824 | uep->handler = &usbhsg_handler_recv_packet; |
| 825 | |
| 826 | ret = 0; |
| 827 | } |
| 828 | spin_unlock_irqrestore(lock, flags); |
| 829 | /******************** spin unlock ******************/ |
| 830 | |
| 831 | return ret; |
| 832 | } |
| 833 | |
| 834 | static int usbhsg_ep_disable(struct usb_ep *ep) |
| 835 | { |
| 836 | struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); |
| 837 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 838 | spinlock_t *lock = usbhsg_gpriv_to_lock(gpriv); |
| 839 | unsigned long flags; |
| 840 | int ret; |
| 841 | |
| 842 | /******************** spin lock ********************/ |
| 843 | spin_lock_irqsave(lock, flags); |
| 844 | ret = usbhsg_pipe_disable(uep); |
| 845 | spin_unlock_irqrestore(lock, flags); |
| 846 | /******************** spin unlock ******************/ |
| 847 | |
| 848 | return ret; |
| 849 | } |
| 850 | |
| 851 | static struct usb_request *usbhsg_ep_alloc_request(struct usb_ep *ep, |
| 852 | gfp_t gfp_flags) |
| 853 | { |
| 854 | struct usbhsg_request *ureq; |
| 855 | |
| 856 | ureq = kzalloc(sizeof *ureq, gfp_flags); |
| 857 | if (!ureq) |
| 858 | return NULL; |
| 859 | |
| 860 | INIT_LIST_HEAD(&ureq->node); |
| 861 | return &ureq->req; |
| 862 | } |
| 863 | |
| 864 | static void usbhsg_ep_free_request(struct usb_ep *ep, |
| 865 | struct usb_request *req) |
| 866 | { |
| 867 | struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); |
| 868 | |
| 869 | WARN_ON(!list_empty(&ureq->node)); |
| 870 | kfree(ureq); |
| 871 | } |
| 872 | |
| 873 | static int usbhsg_ep_queue(struct usb_ep *ep, struct usb_request *req, |
| 874 | gfp_t gfp_flags) |
| 875 | { |
| 876 | struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); |
| 877 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 878 | struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); |
| 879 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| 880 | spinlock_t *lock = usbhsg_gpriv_to_lock(gpriv); |
| 881 | unsigned long flags; |
| 882 | int ret = 0; |
| 883 | int is_locked; |
| 884 | |
| 885 | /* |
| 886 | * CAUTION [*endpoint queue*] |
| 887 | * |
| 888 | * This function will be called from usb_request :: complete |
| 889 | * or usb driver timing. |
| 890 | * If this function is called from usb_request :: complete, |
| 891 | * it is already under spinlock on this driver. |
| 892 | * but it is called frm usb driver, this function should call spinlock. |
| 893 | * |
| 894 | * This function is using spin_trylock_irqsave to solve this issue. |
| 895 | * if "is_locked" is 1, this mean this function lock it. |
| 896 | * but if it is 0, this mean it is already under spin lock. |
| 897 | * see also |
| 898 | * CAUTION [*queue handler*] |
| 899 | * CAUTION [*request complete*] |
| 900 | */ |
| 901 | |
| 902 | /******************** spin lock ********************/ |
| 903 | is_locked = spin_trylock_irqsave(lock, flags); |
| 904 | |
| 905 | /* param check */ |
| 906 | if (usbhsg_is_not_connected(gpriv) || |
| 907 | unlikely(!gpriv->driver) || |
| 908 | unlikely(!pipe)) |
| 909 | ret = -ESHUTDOWN; |
| 910 | else |
| 911 | usbhsg_queue_push(uep, ureq); |
| 912 | |
| 913 | if (is_locked) |
| 914 | spin_unlock_irqrestore(lock, flags); |
| 915 | /******************** spin unlock ******************/ |
| 916 | |
| 917 | usbhsg_queue_prepare(uep); |
| 918 | |
| 919 | return ret; |
| 920 | } |
| 921 | |
| 922 | static int usbhsg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) |
| 923 | { |
| 924 | struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); |
| 925 | struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); |
| 926 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 927 | spinlock_t *lock = usbhsg_gpriv_to_lock(gpriv); |
| 928 | unsigned long flags; |
| 929 | int is_locked; |
| 930 | |
| 931 | /* |
| 932 | * see |
| 933 | * CAUTION [*queue handler*] |
| 934 | * CAUTION [*endpoint queue*] |
| 935 | * CAUTION [*request complete*] |
| 936 | */ |
| 937 | |
| 938 | /******************** spin lock ********************/ |
| 939 | is_locked = spin_trylock_irqsave(lock, flags); |
| 940 | |
| 941 | usbhsg_queue_pop(uep, ureq, -ECONNRESET); |
| 942 | |
| 943 | if (is_locked) |
| 944 | spin_unlock_irqrestore(lock, flags); |
| 945 | /******************** spin unlock ******************/ |
| 946 | |
| 947 | return 0; |
| 948 | } |
| 949 | |
| 950 | static int __usbhsg_ep_set_halt_wedge(struct usb_ep *ep, int halt, int wedge) |
| 951 | { |
| 952 | struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); |
| 953 | struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); |
| 954 | struct usbhsg_gpriv *gpriv = usbhsg_uep_to_gpriv(uep); |
| 955 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 956 | spinlock_t *lock = usbhsg_gpriv_to_lock(gpriv); |
| 957 | unsigned long flags; |
| 958 | int ret = -EAGAIN; |
| 959 | int is_locked; |
| 960 | |
| 961 | /* |
| 962 | * see |
| 963 | * CAUTION [*queue handler*] |
| 964 | * CAUTION [*endpoint queue*] |
| 965 | * CAUTION [*request complete*] |
| 966 | */ |
| 967 | |
| 968 | /******************** spin lock ********************/ |
| 969 | is_locked = spin_trylock_irqsave(lock, flags); |
| 970 | if (!usbhsg_queue_get(uep)) { |
| 971 | |
| 972 | dev_dbg(dev, "set halt %d (pipe %d)\n", |
| 973 | halt, usbhs_pipe_number(pipe)); |
| 974 | |
| 975 | if (halt) |
| 976 | usbhs_fifo_stall(pipe); |
| 977 | else |
| 978 | usbhs_fifo_disable(pipe); |
| 979 | |
| 980 | if (halt && wedge) |
| 981 | usbhsg_status_set(gpriv, USBHSG_STATUS_WEDGE); |
| 982 | else |
| 983 | usbhsg_status_clr(gpriv, USBHSG_STATUS_WEDGE); |
| 984 | |
| 985 | ret = 0; |
| 986 | } |
| 987 | |
| 988 | if (is_locked) |
| 989 | spin_unlock_irqrestore(lock, flags); |
| 990 | /******************** spin unlock ******************/ |
| 991 | |
| 992 | return ret; |
| 993 | } |
| 994 | |
| 995 | static int usbhsg_ep_set_halt(struct usb_ep *ep, int value) |
| 996 | { |
| 997 | return __usbhsg_ep_set_halt_wedge(ep, value, 0); |
| 998 | } |
| 999 | |
| 1000 | static int usbhsg_ep_set_wedge(struct usb_ep *ep) |
| 1001 | { |
| 1002 | return __usbhsg_ep_set_halt_wedge(ep, 1, 1); |
| 1003 | } |
| 1004 | |
| 1005 | static struct usb_ep_ops usbhsg_ep_ops = { |
| 1006 | .enable = usbhsg_ep_enable, |
| 1007 | .disable = usbhsg_ep_disable, |
| 1008 | |
| 1009 | .alloc_request = usbhsg_ep_alloc_request, |
| 1010 | .free_request = usbhsg_ep_free_request, |
| 1011 | |
| 1012 | .queue = usbhsg_ep_queue, |
| 1013 | .dequeue = usbhsg_ep_dequeue, |
| 1014 | |
| 1015 | .set_halt = usbhsg_ep_set_halt, |
| 1016 | .set_wedge = usbhsg_ep_set_wedge, |
| 1017 | }; |
| 1018 | |
| 1019 | /* |
| 1020 | * usb module start/end |
| 1021 | */ |
| 1022 | static int usbhsg_try_start(struct usbhs_priv *priv, u32 status) |
| 1023 | { |
| 1024 | struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| 1025 | struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); |
| 1026 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
| 1027 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1028 | spinlock_t *lock = usbhsg_gpriv_to_lock(gpriv); |
| 1029 | unsigned long flags; |
| 1030 | |
| 1031 | /******************** spin lock ********************/ |
| 1032 | spin_lock_irqsave(lock, flags); |
| 1033 | |
| 1034 | /* |
| 1035 | * enable interrupt and systems if ready |
| 1036 | */ |
| 1037 | usbhsg_status_set(gpriv, status); |
| 1038 | if (!(usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) && |
| 1039 | usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD))) |
| 1040 | goto usbhsg_try_start_unlock; |
| 1041 | |
| 1042 | dev_dbg(dev, "start gadget\n"); |
| 1043 | |
| 1044 | /* |
| 1045 | * pipe initialize and enable DCP |
| 1046 | */ |
| 1047 | usbhs_pipe_init(priv); |
| 1048 | usbhsg_dcp_enable(dcp); |
| 1049 | |
| 1050 | /* |
| 1051 | * system config enble |
| 1052 | * - HI speed |
| 1053 | * - function |
| 1054 | * - usb module |
| 1055 | */ |
| 1056 | usbhs_sys_hispeed_ctrl(priv, 1); |
| 1057 | usbhs_sys_function_ctrl(priv, 1); |
| 1058 | usbhs_sys_usb_ctrl(priv, 1); |
| 1059 | |
| 1060 | /* |
| 1061 | * enable irq callback |
| 1062 | */ |
| 1063 | mod->irq_dev_state = usbhsg_irq_dev_state; |
| 1064 | mod->irq_ctrl_stage = usbhsg_irq_ctrl_stage; |
| 1065 | mod->irq_empty = usbhsg_irq_empty; |
| 1066 | mod->irq_ready = usbhsg_irq_ready; |
| 1067 | mod->irq_bempsts = 0; |
| 1068 | mod->irq_brdysts = 0; |
| 1069 | usbhs_irq_callback_update(priv, mod); |
| 1070 | |
| 1071 | usbhsg_try_start_unlock: |
| 1072 | spin_unlock_irqrestore(lock, flags); |
| 1073 | /******************** spin unlock ********************/ |
| 1074 | |
| 1075 | return 0; |
| 1076 | } |
| 1077 | |
| 1078 | static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status) |
| 1079 | { |
| 1080 | struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| 1081 | struct usbhs_mod *mod = usbhs_mod_get_current(priv); |
| 1082 | struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); |
| 1083 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1084 | spinlock_t *lock = usbhsg_gpriv_to_lock(gpriv); |
| 1085 | unsigned long flags; |
| 1086 | |
| 1087 | /******************** spin lock ********************/ |
| 1088 | spin_lock_irqsave(lock, flags); |
| 1089 | |
| 1090 | /* |
| 1091 | * disable interrupt and systems if 1st try |
| 1092 | */ |
| 1093 | usbhsg_status_clr(gpriv, status); |
| 1094 | if (!usbhsg_status_has(gpriv, USBHSG_STATUS_STARTED) && |
| 1095 | !usbhsg_status_has(gpriv, USBHSG_STATUS_REGISTERD)) |
| 1096 | goto usbhsg_try_stop_unlock; |
| 1097 | |
| 1098 | /* disable all irq */ |
| 1099 | mod->irq_dev_state = NULL; |
| 1100 | mod->irq_ctrl_stage = NULL; |
| 1101 | mod->irq_empty = NULL; |
| 1102 | mod->irq_ready = NULL; |
| 1103 | mod->irq_bempsts = 0; |
| 1104 | mod->irq_brdysts = 0; |
| 1105 | usbhs_irq_callback_update(priv, mod); |
| 1106 | |
| 1107 | usbhsg_dcp_disable(dcp); |
| 1108 | |
| 1109 | gpriv->gadget.speed = USB_SPEED_UNKNOWN; |
| 1110 | |
| 1111 | /* disable sys */ |
| 1112 | usbhs_sys_hispeed_ctrl(priv, 0); |
| 1113 | usbhs_sys_function_ctrl(priv, 0); |
| 1114 | usbhs_sys_usb_ctrl(priv, 0); |
| 1115 | |
| 1116 | spin_unlock_irqrestore(lock, flags); |
| 1117 | /******************** spin unlock ********************/ |
| 1118 | |
| 1119 | if (gpriv->driver && |
| 1120 | gpriv->driver->disconnect) |
| 1121 | gpriv->driver->disconnect(&gpriv->gadget); |
| 1122 | |
| 1123 | dev_dbg(dev, "stop gadget\n"); |
| 1124 | |
| 1125 | return 0; |
| 1126 | |
| 1127 | usbhsg_try_stop_unlock: |
| 1128 | spin_unlock_irqrestore(lock, flags); |
| 1129 | |
| 1130 | return 0; |
| 1131 | } |
| 1132 | |
| 1133 | /* |
| 1134 | * |
| 1135 | * linux usb function |
| 1136 | * |
| 1137 | */ |
| 1138 | struct usbhsg_gpriv *the_controller; |
| 1139 | int usb_gadget_probe_driver(struct usb_gadget_driver *driver, |
| 1140 | int (*bind)(struct usb_gadget *)) |
| 1141 | { |
| 1142 | struct usbhsg_gpriv *gpriv = the_controller; |
| 1143 | struct usbhs_priv *priv; |
| 1144 | struct device *dev; |
| 1145 | int ret; |
| 1146 | |
| 1147 | if (!bind || |
| 1148 | !driver || |
| 1149 | !driver->setup || |
| 1150 | driver->speed != USB_SPEED_HIGH) |
| 1151 | return -EINVAL; |
| 1152 | if (!gpriv) |
| 1153 | return -ENODEV; |
| 1154 | if (gpriv->driver) |
| 1155 | return -EBUSY; |
| 1156 | |
| 1157 | dev = usbhsg_gpriv_to_dev(gpriv); |
| 1158 | priv = usbhsg_gpriv_to_priv(gpriv); |
| 1159 | |
| 1160 | /* first hook up the driver ... */ |
| 1161 | gpriv->driver = driver; |
| 1162 | gpriv->gadget.dev.driver = &driver->driver; |
| 1163 | |
| 1164 | ret = device_add(&gpriv->gadget.dev); |
| 1165 | if (ret) { |
| 1166 | dev_err(dev, "device_add error %d\n", ret); |
| 1167 | goto add_fail; |
| 1168 | } |
| 1169 | |
| 1170 | ret = bind(&gpriv->gadget); |
| 1171 | if (ret) { |
| 1172 | dev_err(dev, "bind to driver %s error %d\n", |
| 1173 | driver->driver.name, ret); |
| 1174 | goto bind_fail; |
| 1175 | } |
| 1176 | |
| 1177 | dev_dbg(dev, "bind %s\n", driver->driver.name); |
| 1178 | |
| 1179 | return usbhsg_try_start(priv, USBHSG_STATUS_REGISTERD); |
| 1180 | |
| 1181 | bind_fail: |
| 1182 | device_del(&gpriv->gadget.dev); |
| 1183 | add_fail: |
| 1184 | gpriv->driver = NULL; |
| 1185 | gpriv->gadget.dev.driver = NULL; |
| 1186 | |
| 1187 | return ret; |
| 1188 | } |
| 1189 | EXPORT_SYMBOL(usb_gadget_probe_driver); |
| 1190 | |
| 1191 | int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) |
| 1192 | { |
| 1193 | struct usbhsg_gpriv *gpriv = the_controller; |
| 1194 | struct usbhs_priv *priv; |
| 1195 | struct device *dev = usbhsg_gpriv_to_dev(gpriv); |
| 1196 | |
| 1197 | if (!gpriv) |
| 1198 | return -ENODEV; |
| 1199 | |
| 1200 | if (!driver || |
| 1201 | !driver->unbind || |
| 1202 | driver != gpriv->driver) |
| 1203 | return -EINVAL; |
| 1204 | |
| 1205 | dev = usbhsg_gpriv_to_dev(gpriv); |
| 1206 | priv = usbhsg_gpriv_to_priv(gpriv); |
| 1207 | |
| 1208 | usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD); |
| 1209 | device_del(&gpriv->gadget.dev); |
| 1210 | gpriv->driver = NULL; |
| 1211 | |
| 1212 | if (driver->disconnect) |
| 1213 | driver->disconnect(&gpriv->gadget); |
| 1214 | |
| 1215 | driver->unbind(&gpriv->gadget); |
| 1216 | dev_dbg(dev, "unbind %s\n", driver->driver.name); |
| 1217 | |
| 1218 | return 0; |
| 1219 | } |
| 1220 | EXPORT_SYMBOL(usb_gadget_unregister_driver); |
| 1221 | |
| 1222 | /* |
| 1223 | * usb gadget ops |
| 1224 | */ |
| 1225 | static int usbhsg_get_frame(struct usb_gadget *gadget) |
| 1226 | { |
| 1227 | struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget); |
| 1228 | struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); |
| 1229 | |
| 1230 | return usbhs_frame_get_num(priv); |
| 1231 | } |
| 1232 | |
| 1233 | static struct usb_gadget_ops usbhsg_gadget_ops = { |
| 1234 | .get_frame = usbhsg_get_frame, |
| 1235 | }; |
| 1236 | |
| 1237 | static int usbhsg_start(struct usbhs_priv *priv) |
| 1238 | { |
| 1239 | return usbhsg_try_start(priv, USBHSG_STATUS_STARTED); |
| 1240 | } |
| 1241 | |
| 1242 | static int usbhsg_stop(struct usbhs_priv *priv) |
| 1243 | { |
| 1244 | return usbhsg_try_stop(priv, USBHSG_STATUS_STARTED); |
| 1245 | } |
| 1246 | |
| 1247 | int __devinit usbhs_mod_gadget_probe(struct usbhs_priv *priv) |
| 1248 | { |
| 1249 | struct usbhsg_gpriv *gpriv; |
| 1250 | struct usbhsg_uep *uep; |
| 1251 | struct device *dev = usbhs_priv_to_dev(priv); |
| 1252 | int pipe_size = usbhs_get_dparam(priv, pipe_size); |
| 1253 | int i; |
| 1254 | |
| 1255 | gpriv = kzalloc(sizeof(struct usbhsg_gpriv), GFP_KERNEL); |
| 1256 | if (!gpriv) { |
| 1257 | dev_err(dev, "Could not allocate gadget priv\n"); |
| 1258 | return -ENOMEM; |
| 1259 | } |
| 1260 | |
| 1261 | uep = kzalloc(sizeof(struct usbhsg_uep) * pipe_size, GFP_KERNEL); |
| 1262 | if (!uep) { |
| 1263 | dev_err(dev, "Could not allocate ep\n"); |
| 1264 | goto usbhs_mod_gadget_probe_err_gpriv; |
| 1265 | } |
| 1266 | |
| 1267 | /* |
| 1268 | * CAUTION |
| 1269 | * |
| 1270 | * There is no guarantee that it is possible to access usb module here. |
| 1271 | * Don't accesses to it. |
| 1272 | * The accesse will be enable after "usbhsg_start" |
| 1273 | */ |
| 1274 | |
| 1275 | /* |
| 1276 | * register itself |
| 1277 | */ |
| 1278 | usbhs_mod_register(priv, &gpriv->mod, USBHS_GADGET); |
| 1279 | |
| 1280 | /* init gpriv */ |
| 1281 | gpriv->mod.name = "gadget"; |
| 1282 | gpriv->mod.start = usbhsg_start; |
| 1283 | gpriv->mod.stop = usbhsg_stop; |
| 1284 | gpriv->uep = uep; |
| 1285 | gpriv->uep_size = pipe_size; |
| 1286 | usbhsg_status_init(gpriv); |
| 1287 | |
| 1288 | /* |
| 1289 | * init gadget |
| 1290 | */ |
| 1291 | device_initialize(&gpriv->gadget.dev); |
| 1292 | dev_set_name(&gpriv->gadget.dev, "gadget"); |
| 1293 | gpriv->gadget.dev.parent = dev; |
| 1294 | gpriv->gadget.name = "renesas_usbhs_udc"; |
| 1295 | gpriv->gadget.ops = &usbhsg_gadget_ops; |
| 1296 | gpriv->gadget.is_dualspeed = 1; |
| 1297 | |
| 1298 | INIT_LIST_HEAD(&gpriv->gadget.ep_list); |
| 1299 | |
| 1300 | /* |
| 1301 | * init usb_ep |
| 1302 | */ |
| 1303 | usbhsg_for_each_uep_with_dcp(uep, gpriv, i) { |
| 1304 | uep->gpriv = gpriv; |
| 1305 | snprintf(uep->ep_name, EP_NAME_SIZE, "ep%d", i); |
| 1306 | |
| 1307 | uep->ep.name = uep->ep_name; |
| 1308 | uep->ep.ops = &usbhsg_ep_ops; |
| 1309 | INIT_LIST_HEAD(&uep->ep.ep_list); |
| 1310 | INIT_LIST_HEAD(&uep->list); |
| 1311 | |
| 1312 | /* init DCP */ |
| 1313 | if (usbhsg_is_dcp(uep)) { |
| 1314 | gpriv->gadget.ep0 = &uep->ep; |
| 1315 | uep->ep.maxpacket = 64; |
| 1316 | } |
| 1317 | /* init normal pipe */ |
| 1318 | else { |
| 1319 | uep->ep.maxpacket = 512; |
| 1320 | list_add_tail(&uep->ep.ep_list, &gpriv->gadget.ep_list); |
| 1321 | } |
| 1322 | } |
| 1323 | |
| 1324 | the_controller = gpriv; |
| 1325 | |
| 1326 | dev_info(dev, "gadget probed\n"); |
| 1327 | |
| 1328 | return 0; |
| 1329 | |
| 1330 | usbhs_mod_gadget_probe_err_gpriv: |
| 1331 | kfree(gpriv); |
| 1332 | |
| 1333 | return -ENOMEM; |
| 1334 | } |
| 1335 | |
| 1336 | void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv) |
| 1337 | { |
| 1338 | struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); |
| 1339 | |
| 1340 | kfree(gpriv); |
| 1341 | } |